Publishing videos to journals has issues

I have created two iPhoto journals on my iPhone and they have a mixture of photos and videos (all created by the iPhone).
when I publish to the cloud and access the URL with safari, all videos play in the orientation they were recorded (portrait vs. landscape)
when I access the URL with Internet Explorer on windows, the videos shot in portrait get rotated to landscape and the user cannot enjoy them because the video plays -90 degrees from its original orientation.  (videos shot in landscape playback fine in landscape)
both safari on Mac and Windows plays the portrait videos just fine, but IE does not.
is the web page source code support something unique to Safari that IE does not support ?

IE9 did not playback the portrait recorded videos in portrait orientation.
then I tried this on another computer running IE8.  that version of IE prompted me to download an apple add-on and the videos played as expected.
I don't know why IE9 didn't prompt to download the add-on but that must be the reason why the portrait videos playback in landscape.
It may have something to do with the security settings for the IE9 browser.

Similar Messages

  • Performance while publishing video on iOS and Android

    Hi,
    I'm building a small Video-Chat-App and playing around with publishing video and audio.
    Everything is fine on Desktop, but if i port the code to mobile I'm facing a kind of permformance issue.
    So I build a small app just using Camera, Video and NetConnection/NetStream for testing.
    If I attach the Camera to Video and switching between different resolutions (320x240, 480x360, 640x480 at 30fps, camquality at 75) the video is running smoothly.
    But the framerate drops when I start publishing via NetStream, depending on the selected Camera-resolution.
    Render mode is set to "direct", but I also tested the others without any good results. Building is done with AIR 3.5, tested on iPad2 with iOS 6.2.1 and Samsung S3 with Android 4.1.2
    Using 320x240 is fine on both devices. but at 480x360 framerate on iPad 2 drops to 15fps, S3 still has 28fps. On 640x480 iPad drops to 10fps, S3 at 14fps.
    Does anyone facing the same problems or has a tweak/solution or is this just depoending on the hardware/cpu because publishing via NetStream is eating a lot?
    Any ideas, hints or informations are much appreciated.
    Kind regards
    Benny

    Regarding information about creating fixed layout ePubs from InDesign, you might find this webcast on August 26 useful:
    Upcoming Digital Book World Webcasts | Digital Book World

  • FCPX, How do I reconnect a video file that has been modified or over written?

    FCPX, How do I reconnect a video file that has been modified or over written?
    As an animator, I am constantly modifying and overwriting movies files that have already been imported into the Final Cut time line. In FCP7, I could easily modify and update movie files and have those changes appear in the timeline without the need to reimport and re-edit those clips, but FCPX seems to lose it's connection with any modified or overwritten file, making all the editing work I've done to these files worthless.
    Does anyone know of a way to reconnect to a modified or overwritten file? Because, this one single issue makes FCPX completely worthless to me.
    Andy Murdock

    If you import the new clip , select it and drag over the old offline clip , you can choose from the menu ...

  • HT201412 Sound works (songs) on Ipad 2 but sound on videos (example utube) sound does not work. Video plays with no issue.

    Sound works (songs) on Ipad 2 but sound on videos (example utube) sound does not work. Video plays with no issue.Mute us not checked in general settings. Reboot (off/on) has not helped. Deleted apps and reloaded them. Did not help. Any other suggestions thank you

    If you lose sound for games or other apps, email notifications and other notifications, system sounds may have been muted.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the control center. Swipe up from the bottom of the screen to get to control center . Tap on the bell icon and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock can be accessed in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085

  • I'm a new user and learning, I bought and installed Premiere Pro cs6.  I got a nice video clip but has a baby cried in the background and very annoying.  My question is, is this noise remover is separate from the cs6 or I need to get this software downloa

    I'm a new user and learning, I bought and installed Premiere Pro cs6.  I got a nice video clip but has a baby cried in the background and very annoying.  I have tried all of the sounds in Prem cs6 but didn't work. My question is, do I need to get a separate sound software download and install to be able to use it?

    In the CS versions, there was some audio capability in PrPro but you needed to get a separate audio program for major work. Lessening a baby definitely qualifies as major work. That's lessening, i dont mean eliminating. Adobe's audio program is Audition. There are others "out there'. In the CC versions one just downloads Audution also.
    Neil

  • MacBook Air intermittently has issues connecting to websites when wireless shows connected to the internet. The pages show that I am offline, but I can ping Google DNS. Windows PC, iPhone and Android phone have no issue displaying the same web pages.

    MacBook Air intermittently has issues connecting to websites when wireless shows connected to the internet. The pages show that I am offline, but I can ping Google DNS. Windows PC, iPhone and Android phone have no issue displaying the same web pages.How do I solve this issue?

    Go step by step and test.
    1. Power off the router. Unplug it from the wall. Wait a while.
        Plug it back to the wall. Power the router on. Wait until all the lights are lit properly. It will take a while.
        Restart the computer.
        Start up in Safe Mode.
        http://support.apple.com/kb/PH14204
    2. Empty Caches
        Safari > Preference > Advanced
        Checkmark the box for "Show Develop menu in menu bar".
        Develop menu will appear in the Safari menu bar.
        Click Develop and select "Empty Caches" from the dropdown.
    3. Deselect Proxies if selected.
        System Preference > Network > Advanced  > Proxies Tab
        Under "Select Protocol", uncheck any box if selected.
        Click "OK" then  "Apply”.

  • I have created a .png logo to use on my video. It has it's own storyline so the logo is shown overthe whole video. Do I need to composite the logo storyline to the main storyline before exporting? Same question for the audio storyline.

    Final Cut Pro 10.0.8
    I have created a .png logo to use on my video. It has it's own storyline so the logo is shown over the whole video. Do I need to composite the logo storyline to the main storyline before exporting? Same question for the audio storyline.

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar
    The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
    Thus, if you get it to work restore to factory settings/new iPod, not from backup                               
    You can redownload most iTunes purchases by:        
      Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • I have registered a credit card for purchasing apps from the app store. My bank has issued a new chip based card and now the 16 digit numbers have changed. How do I register the new card for flowless purchases?

    I have registered a credit card for purchasing apps from the app store. My bank has issued a new chip based card and now the 16 digit numbers have changed. How do I register the new card for flowless purchases?

    Go to Apple Menu > App Store > View my account > sign in and then edit the payment details with the new card details.  
    I am assuming that your card and supporting bank are in the same country as your residential (billing) address and that you are using the App Store of that country.

  • It seems after the latest software update, my iphone 4 has issues with the phone and voicemail locking up as well as opening random apps.  Any thoughts?

    It seems after the latest software update, my iphone 4 has issues with the phone and voicemail locking up as well as opening random apps.  Any thoughts?

    Hi clintfromid,
    Thanks for using Apple Support Communities.  I would recommend closing all your apps and restarting and maybe resetting as good initial troubleshooting steps for this:
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    Cheers,
    - Ari

  • When publishing video files in H.264 format, I get the error "No rendered photo exists on disk"

    I want to export images as well as videos (.mov files) by using the Publishing Manager in Lightroom 5.6 under Windows 7, 64 Bit. For this I activated "Include Video Files" in the Publishing Manager and set "Video Format" to "H.264". When publishing, all photos are correctly published. The videos, however, are not published. Instead Lightroom returns the error: "Some export operations were not performed.", "No rendered photo exists on disk" followed by a list of the videos that could not be exported.
    If I select "Original, unedited file" for "Video Format" instead, the videos are published. Also, if I manually export the videos (without using the Publishing functionality), the export works.
    How can I publish videos using the H.264 format?

    Thanks Brett, I'll try to recreate it
    I just tried to export it again but this time to the desktop, not a Sandisk USB, and this time it created 4 different files, one being audio only and when I tried to play/open the others it gave a 'server error' dialogue  window and I couldn't get a screen shot while this was open.

  • Presenter 10 - theme info not showing in published video

    Using Presenter 10 - when I publish a video using powerpoint my theme with presenter info and selected panes does not show. I start by going to power point and creating a custom theme within the presenter tab and check the presenter info and panes I want to show and press ok. I then hit record and it sends me to adobe presenter video express. I record the video and publish the project. However no theme shows in the final published video. Maybe adobe presenter was not meant to show theme information in a published video?
    Thanks for any help

    Presenter Video Express (APVE) does not use the theme for the PPT output. If you embed the MP4 in a PPT slide using Presenter, then publish it out it will have the theme wrapper around the PPT content, which contains your APVE video.
    If you want to customize the theme in the APVE you can do that when editing your video in that tool.

  • My wife has issues with her AOL email and was told to contact Apple about a virus scan. Has anyone else had a similar issue?

    My wife has issues with her AOL email and a tech rep told her to contact Apple for a virus scan. Has anyone else had a problem like this?

    You forgot to describe the 'issues' but there are no viruses that affect Apple OS X.
    You may find this User Tip on Viruses, Trojan Detection and Removal, as well as general Internet Security and Privacy, useful:
    https://discussions.apple.com/docs/DOC-2435
    The User Tip (which you are welcome to print out and retain for future reference) seeks to offer some guidance on the main security threats and how to avoid them
    Bear in mind that from April to December 2011 there were only 58 attempted security threats to the Mac - a mere fraction compared to Windows malware:
    http://www.f-secure.com/weblog/archives/00002300.html
    (I have ClamXav set to scan incoming emails, but nothing else.)

  • The video clapperboard icon has disappeared.  how can I restore it

    The Video clapperboard icon has disappeared from my iphone screen.  How can I restore it?

    have you found any answers...still cannot find even after updating

  • HT203554 MacBook Pro (15-inch, Mid 2010) intermittent black screen or loss of video. Can I still get this problem resolve by Apple or I'm screwed because the MacBook Pro (15-inch, Mid 2010) intermittent black screen or loss of video Quality Program has en

    MacBook Pro (15-inch, Mid 2010) intermittent black screen or loss of video. Can I still get this problem resolve by Apple or I'm screwed because the MacBook Pro (15-inch, Mid 2010) intermittent black screen or loss of video Quality Program has ended?

    You can have Apple replace the logic board, but it will be at your expense.  The free replacement program has ended.
    As a band aid you may try the following:
    https://gfx.io/
    This will allow you to run on only the integrated GPU.
    Ciao.

  • My magic trackpad has issue with 3 finger swipe between applications or swipe issue after OS X 10.8.1 update.

    hi,
    my magic trackpad has issue with 3 finger swipe between applications or swipe issue after OS X 10.8.1 update.
    Anyone facing the same issue? Thanks.

    Did you check System Preferences - Trackpad ? Also I'm not sure exactly what 3 fingered swipe are you referring to?

Maybe you are looking for