Purchase Requisitin not automatically created at the network level

Hello,
We are facing an issue in the CJ20N
Project- WBS- Network Order- Activity- Materials are attached to it
For ex- Material number 23 is added to the network as per the business process the Purchase requistion will automatically get created.
Now we are facing an issue.
When we add the same material to the activity, the purchase requistion is not created auotmatically, we are not able to view the purchasing data tab.
The moment we add this material, it's stating reservation for network.
Previously it was showing up as purchase requistion for network.
Please help us in knowing what could be the possible reason for this behaviour.
Regards,
prashanth

Hello,
Thank you for all the answers,
I would need additional info from your end to moveahead with theprocess.
One thing we have observed is when we select a material and try to add it again, the procurement will automatically getting picked up as WE.  and we can see the reservation in General data tab.
One more observation initially under the procurement parameters, under the value flow and /quantity flow.
intially it was showing up as 1, now it's showing up as Q
Please let me know where are these configuration done, since i am very new to PS module.
Regards,
Prashanth

Similar Messages

  • "The home folder could not be created because the network name cannot be found" error in AD users and computers

    Our home folders are stored on a non-windows NAS device and with Windows XP and 2003 we've always got the above error when creating or modifying users home folders, even when the shares were al ready created and being used.
    However this was never really a big issue as the error that popped up was really for information and finshed with a "we've modified the user properties anyway, please create the share manually" type message.
    Unfortunately now we are moving to windows 7 and 2008R2, this last part of the the message is missing and it won't accept the correct value. 
    This issue may be in the way that the NAS device shares the folder, as only the username that matches the folder name can access the share.  This behaviour can't be modified.
    Is there a way to get Windows 7/2008R2 AD users and computers to behave the same way that Windows XP/2003 does , i.e. don't try and create the share just set the value in the user properties  ?
    The AD is still at 2003 level and we can still use Windows XP/2003 clients to make the changes but this is a bit of a limitation.

    The KB article is almost what we have apart from theitalic underlined
    part
    Consider the following scenario:
    You use a domain administrator account to log on to a computer that is running Windows 7 or Windows Server 2008 R2.
    You use the Active Directory Users and Computers Microsoft Management Console (MMC) snap-in to connect to a domain controller.
    You open the Properties dialog box of a user account.
    The user account has sole access to a shared folder path that cannot be accessed by the administrator account.
    You set the Remote Desktop Services Home Folderattribute to the shared folder path.
    NoteThis attribute is located on the
    Remote Desktop Services Profiletab.
    You click Apply or OK.
    In this scenario, you receive the following error message:
    The home folder could not be created because: The network name cannot be found.
    Note If you click Apply or OK again, no error message is returned. However, the setting is not saved.
    I think the important bit is
    The user account has sole access to a shared folder path that cannot be accessed by the administrator account.
    We manually create the shares on our NAS and then just want to enter the path in the profile tab, I suppose the question is how to we stop it trying to create the shares ?

  • Coming out of sleep my iMac will not automatically connect to the network

    I've got rid of other networks in system preferences, but they still appear on the toolbar when I click airport, and my network is not first
    Also, again on the toolbar, my network appears twice
    Perhaps these two problems are connected
    Hope someone can help

    Its seems replacing the kext from 10.7.2 helps, but that could be daunting for some users and tbh not something I would recommend. Apple could release a patch or wait to roll it into 10.7.4 or an updated 10.7.3 v1 maybe, who knows!  Since there is a work around (the power button) I imagine it may be a while but I cannot speculate. For now I am connected via Ethernet and will be leaving things like this from now on as the connection is better, but for those that use wifi I would suggest just using the power button, and just wait and see, Apple will release the fix when Apple wants to, they never discuss bugs and glitches so we just have to wait and see, there is no time frame, I mean iOS 5.1 is still not out and people have been complaining since the 4S came out about bugs that 5.0.1 did not fix since October/November last year.

  • ORA-20100: AppDomain could not be created for the specified security level

    We recently updated our development environment to Visual Studio 2010. We have previously deployed (with success) .Net stored procedures from Visual Studio 2005 to our Oracle 10gR2 database. I am currently trying to configure a local instance (called local) of Oracle 10gR2 database to test deployment of .Net stored procedures to Oracle 10gR2 via Visual studio 2010 and ODT version 11.2.0.1.2. I have built the demo from the ode developer guide and gotten as far as deploying it but executing the stored procedures from VS 2010 or SQL*Plus produces the following error...
    ORA-20100: AppDomain could not be created for the specified security level
    ORA-06512: at "SYS.DBMS_CLR", line 152
    ORA-06512: at "SCOTT.GETDEPTNO", line 7
    Here is what I have done.
    (Server)
    1. Installed oracle 10gR2 with ODE.Net
    2. Installed Oracle 10gR2 patch set 22
    3. Installed ODE upgrade from Oracle Developer Tools for Visual Studio .NET with Oracle 10g Release 2 ODAC 10.2.0.2.21
    (Client)
    4. Installed Oracle Developer Tools for Visual Studio .NET with Oracle 10g Release 2 ODAC 10.2.0.2.21 (In new client home).
    5. Installed patch set 22 on 10g client home.
    6. Installed Oracle 11g Release 2 ODAC 11.2.0.1.2 with Oracle Developer Tools for Visual Studio(in new 11g client home, only for VS 2010)
    I have made some minor changes (GAC) etc. per the following threads...
    ODE.NET 11.1.0.7.20 on 10g Database?!
    Re: Error: System.TypeInitializationException
    The database appears to be fully functional via TOAD - SQL plus etc. I can't find much on this error but it appears Oracle needs some permissions to launch an ASP.Net application that it does not have. Any help would be GREATLY appreciated, don't hesitate to ask for additional details.

    The KB article is almost what we have apart from theitalic underlined
    part
    Consider the following scenario:
    You use a domain administrator account to log on to a computer that is running Windows 7 or Windows Server 2008 R2.
    You use the Active Directory Users and Computers Microsoft Management Console (MMC) snap-in to connect to a domain controller.
    You open the Properties dialog box of a user account.
    The user account has sole access to a shared folder path that cannot be accessed by the administrator account.
    You set the Remote Desktop Services Home Folderattribute to the shared folder path.
    NoteThis attribute is located on the
    Remote Desktop Services Profiletab.
    You click Apply or OK.
    In this scenario, you receive the following error message:
    The home folder could not be created because: The network name cannot be found.
    Note If you click Apply or OK again, no error message is returned. However, the setting is not saved.
    I think the important bit is
    The user account has sole access to a shared folder path that cannot be accessed by the administrator account.
    We manually create the shares on our NAS and then just want to enter the path in the profile tab, I suppose the question is how to we stop it trying to create the shares ?

  • PC will not automatically connect to wireless network on startup...

    Hi all - I have a WRTG54 wirless router with the latest firmware.  Windows XP Home SP2.  I have a mixed network with two wired PCs and one wireless.  The wireless PC will not automatically connect to the network. To connect to the network i have to go to the wireless network properties box and check "let windows automatically configure network"  Once I do this the wirelss PC connects with no problem.  Unfortunatley, whenever i turn the PC off and turn it back on the "let windows automatically configure network" is unchecked and i have to go through the process of checking it again.  I uninstalled the wireless adapter and reinstalled the drivers only and then ran the windows wireless setup wizard but the problem persists.  Any help on this would be much appreciated.!!!! Thanks!!

    First of all, give your network a unique SSID. Do not use "linksys". If you are using "linksys" you may be trying to connect to your neighbor's router. Also set "SSID Broadcast" to "enabled". This will help your computer find and lock on to your router's signal.
    Do not let "Windows automatically configure your network".  Instead do the following:
    Also, in the computer, go to your wireless software, and go to "Preferred Networks" (sometimes called "Profiles" ). There are probably a few networks listed. Delete any network named "linksys". Also delete any network that you do not recognize, or that you no longer use.  Delete your current network (this will remove any old settings).  Reboot computer.  Return to "Preferred Networks" and re-enter your current network info (SSID, encryption (if any), and key (if any) ). Then select your current network and make it your default network, and set it to automatic login. You may need to go to "settings" to do this, or you may need to right click on your network and select "Properties" or "settings".  Reboot computer.  It should connect automatically.  If you still have trouble, in the computer, temporarily disable your software firewall, including Windows Firewall, and see if that helps. 
    Some users have reported improved wireless connections by switching to WPA  ( = WPA with TKIP)  encryption.

  • After updating my iPhone 5 to iOS 8.1 it will not connect to the wifi network at work even though it recognizes it. It however still automatically connects to the network at home. I have restared the phone and toggled the router, still no connection

    After updating my iPhone 5 to iOS 8.1 it will not connect to the wifi network at work even though it recognizes it. It however still automatically connects to the network at home (this is the network I used to update the phone). My iPad however does not seem to have any problem connecting. I have restared the phone, toggled the router, re-entered the network password but there's still no connection.

    When your device is trying to connect to the work Wi-Fi network, go to Settings > Wi-Fi > then tap on the name of the Netowrk that she is having trouble with. Then tap on forget this network. Let the device attempt to connect again and make absolutely sure she is trying to connect to the work network and not a nearby network, then make absolutely sure the password is entered correctly.

  • Purchase Req Should not be created if the order is Delivery blocked

    Hello All,
    I have a requirement in third party sales where the Purchase requistion should not be created if the sales order is delivery Blocked, as and when the delivery block is removed then only the PR should be created.
    Please help to fulfill the requirement
    Regards
    kiran

    Hi,
    Please check the field purchase req with delivery scheduling in scheduling line configuration.
    thanks
    Kuntla

  • TS1398 After leaving a wi-fi connection my iphone will not automatically connect to the internet via the 3G network unless I turn it off and then on again. Is there a setting that can be changed to overcome this issue?

    After leaving a wi-fi connection my iphone will not automatically connect to the internet using a mobile 3G network unless I turn my phone off and then back on again. Is there a setting that can be changed to overcome this?

    Then I'm at a loss. Mine has switched automatically from the start, favoring Wi-Fi, any of its registered networks, whenever available. Only thing I can think of is trying a Force Restart and see if that clears things up: hold down Home and Sleep till the screen goes black and a white Apple logo pops up. Release and allow it to restart.
    May be similar, when I got the i5 about 16 months ago, the local carrier was starting to roll out 4G service. The phone would regularly lose all carrier connection, voice and data. Haphazardly would reconnect when it felt like it afterwards. Initially did the Off/On dance to speed things up, but discovered that using Airplane Mode would do the same without the lengthier power cycle. After awhile, the carrier 'fessed they were having capacity issues and later the problem went away. So yours too may also be a carrier issue.

  • PO could not be creating using the Enjoy-BAPI

    Hi expersts.
    I have a problem with BAPI function module BAPI_PO_CREATE1. When program will generate orders for several suppliers for one supplier "PO could not be creating using the Enjoy-BAPI" and "Purchase order item 00010 still contains faulty schedule lines" and
    "Source not included in list despite source list requirement"  messages occur. Order won't be generated.
    When I am generating order only for that supplier, everything is fine. They are generated and no messages are displayed.
    Could anyone help me ?
    Thanks, regards.
    Dan.

    Hi expersts.
    I have a problem with BAPI function module BAPI_PO_CREATE1. When program will generate orders for several suppliers for one supplier "PO could not be creating using the Enjoy-BAPI" and "Purchase order item 00010 still contains faulty schedule lines" and
    "Source not included in list despite source list requirement"  messages occur. Order won't be generated.
    When I am generating order only for that supplier, everything is fine. They are generated and no messages are displayed.
    Could anyone help me ?
    Thanks, regards.
    Dan.

  • U2018Ea unit of measure has not been created in the language ES u2018in srm

    Dear Friends,
    I have checked in ECC & SRM in table T006A (UOM languages). UOM "EA" is defined in ES (Spanish).
    Also in comm_hierarchy also i  chked for product category language maintenance and found maintained in EN,ES languages.
    u2018Ea unit of measure has not been created in the language ES u2018
    I have tried with sapanish (international sort,dominic,traditional sort)& rest of spanish spoken country languages but i am getting the same error.( IE- tools-general-languages & refreshed the page). u2018Ea unit of measure has not been created in the language ES u2018
    Regards,
    William

    Hi Willam,
    When are you getting this error ? i.e. while creation of shopping cart or process purchase order..
    I believe this issue is due to creation of UOM..which means EA UOM should be created with EA language.
    For further details please have a look on
    http://wiki.sdn.sap.com/wiki/display/SI/UnitofMeasurerelatedsettingsinSAP
    where they have specified that "Maintain UOM in different languages by logging to the system with different logon language"
    Kindly confirm.
    Thanks
    Rajesh K

  • RFC destination BW could not be created in the source system R3073

    I'm creating a source system for our BW (version 7.0) dev client.I'm linking it to our R/3 4.7 QA client. From RSA1 I select create source system, I enter the system information and in the next screen I'm prompted to log on as system administrator. I'm in QA now and the system automatically crated the RFC connection. I test the connection and it runs ok. I log on to the BW client from QA and it logs on just fine. When I exit the screen I get the following message:
    RFC destination BW could not be created in the source system message number R3073
    Why is this happening? The connection tests just fine.
    I'm using RFCREMOTE user in BW and ALEREMOTE in QA with the same password
    Any ideas?
    thanks

    Hi,
    I cannot tell you surely the settings for SCC4 now (I can't connect to my sys).
    Nevertheless, create your R3QA RFCDEST manually in your BWDEV with SM59.
    Create your BWDEV RFCDEST manually in your BWQA .
    Perform test and authorization test within SM59 from both sys.
    When creating the source system in BW the system will detect the RFC and ask you if you want to use it; accept an proceed the the rest of the procedure.
    hope this helps...
    Olivier.

  • Association is not automatically created between synonyms.

    I use JDeveloper 11gr2. When using wizard to create "Business Components from Tables" using OE(order entry) schema to create entity objects, associations are not automatically created for entity objects associated with synonym. For example, when i launch that wizard with OE schema selected, I select Customer (table) and Employee(synonym) to create my entities. When the wizard finished, the association between Customer and Employee is not automatically created for me. When i drag these 2 entities to the business component diagram, there is no association link between them.
    Thank you for answering!

    Customer table in OE schema have ACCOUNT_MGR_ID point to EMPLOYEE_ID in Employee table in HR schema. When I use create "Business Components from Tables" wizard, I expect association between EMPLOYEE and CUSTOMER to be automatically picked up by ADF BC which is not the case. Do i have to manually create association for Entities that are belong to different schema? Thank you.

  • Bookmarks are not automatically creating based on Word 2013 Table of Contents.

    Bookmarks are not automatically creating based on Word 2013 Table of Contents.  In older version of Word, the Style built Table of Contents converted into Bookmarks when PDFing.

    I figured it out.  There is a new checkbox you must turn on in Word 2013 when export to PDF that allows it to convert items to Bookmarks when PDFing.

  • Does not automatically connect to wireless network anymore

    Mac Book does not automatically connect to know networks any longer.

    Hi sashton,
    When troubleshooting Wi-Fi connectivity issues, I find the following resource has the most relevant information:
    Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
    http://support.apple.com/kb/HT4628
    Furthermore, you may want to avoid giving your network a common name. While the following article (and excerpt) refer to iOS devices, the same applies for your Mac:
    Avoid giving your wireless network a common name (SSID)
    http://support.apple.com/kb/HT4450
    If you were to give your wireless network a common name (SSID), users of your network who use iOS devices [sic] and are away from your network would run the risk of joining a different network with the same name. Having joined the unexpected network, they would be exposed to potential data theft.
    Because of this security issue, Apple maintains a list of common or ambiguous SSIDs, including the default SSID for many commercially available access points, as well as the SSIDs "wireless" and "default". If your network's name is on the list, any iOS device [sic] that joins the network stores the access point's BSSID and associates it with the network's SSID. Subsequently, it will only auto-join the network if the access point's BSSID matches the information the device has stored. This avoids joining a different network with the same name.
    Therefore, you may want to refer to the following article when configuring your Wi-Fi router:
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/HT4199
    Thanks,
    Matt M.

  • When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box

    When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box in middle of screen that says that it does it like every time I go to sync the phone after i do app updates. I am getting very frustrated by this can someone please help. I have made 2 other discussion topics about this and no replies on them. Please if anyone can help I ask for help. This has occurred ever since the iOS 5.1 update and the iTunes 10.6.0 and still continues with the iTunes 10.6.1 update just yesterday and perhaps even worse now. PLEASE HELP IF YOU CAN. I have looked through my network settings etc and everything looks good here on my side.

    When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box in middle of screen that says that it does it like every time I go to sync the phone after i do app updates. I am getting very frustrated by this can someone please help. I have made 2 other discussion topics about this and no replies on them. Please if anyone can help I ask for help. This has occurred ever since the iOS 5.1 update and the iTunes 10.6.0 and still continues with the iTunes 10.6.1 update just yesterday and perhaps even worse now. PLEASE HELP IF YOU CAN. I have looked through my network settings etc and everything looks good here on my side.

Maybe you are looking for