Association is not automatically created between synonyms.
I use JDeveloper 11gr2. When using wizard to create "Business Components from Tables" using OE(order entry) schema to create entity objects, associations are not automatically created for entity objects associated with synonym. For example, when i launch that wizard with OE schema selected, I select Customer (table) and Employee(synonym) to create my entities. When the wizard finished, the association between Customer and Employee is not automatically created for me. When i drag these 2 entities to the business component diagram, there is no association link between them.
Thank you for answering!
Customer table in OE schema have ACCOUNT_MGR_ID point to EMPLOYEE_ID in Employee table in HR schema. When I use create "Business Components from Tables" wizard, I expect association between EMPLOYEE and CUSTOMER to be automatically picked up by ADF BC which is not the case. Do i have to manually create association for Entities that are belong to different schema? Thank you.
Similar Messages
-
Bookmarks are not automatically creating based on Word 2013 Table of Contents.
Bookmarks are not automatically creating based on Word 2013 Table of Contents. In older version of Word, the Style built Table of Contents converted into Bookmarks when PDFing.
I figured it out. There is a new checkbox you must turn on in Word 2013 when export to PDF that allows it to convert items to Bookmarks when PDFing.
-
I have setup an extended network in my home using an Airport Extreme and an Airport Express. The Extreme is connected directly to the FiOS modem and the Express is being used as the extender. The nework is setup fine, but my devices (MBA, iPhone, iPad) are not switching base stations when the signal becomes poor on the one it's connected to. For example, I am upstairs with my MBA and a great signal as I am connected to the Express. When I move downstairs to where the Extreme is setup, the Wi-Fi connection becomes poor even though I am litterally sitting next to the Extreme. To force it to connect to the Extreme, I need to shutoff the Wi-Fi on the MBA and turn back on. At this point, the MBA will connect to the Extreme with a excellent signal.
Any thoughts on why the MBA is not automatically switching?
Thanks for the help!
BrianThe first troubleshooting step for any kind of network "issue" is a complete power cycle of the network. This gives everything a "fresh start" with new connections.
Power off the entire network.....all devices....in any order you want
Wait a minute or two
Start the modem/router first, and let it run a full minute
Start the AirPort Extreme next and let it run a full minute
Keep starting devices one at a time about a minute apart until the entire network is back up
Check the network again with the MBA and report on your results
Do not worry about the iPhone and iPad....they are pretty much hopeless as far as automatically switching from one access point to another....but the MBA should if it is working correctly. -
PTR Record not Automatically Created in dns server
how to config when client joint to domian PTR Record Automatically Created in dns server
Hi Farzad_en,
Based on my knowledge , you need to allow Dynamic Updates .
"Open DNS Manager. To open DNS Manager, click Start, point to
Administrative Tools, and then click DNS.
In the console tree, right-click the applicable zone, and then click
Properties.
On the General tab, verify that the zone type is either
Primary or Active Directory-integrated.
In Dynamic Updates, click Nonsecure and secure."
For details please refer to following link:
http://technet.microsoft.com/en-us/library/cc794806(v=ws.10).aspx
Hope this helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Ipad does not automatically roll between networks
We have 2 iPads. One does not automatically choose whatever wifi network it is in even having been in it before, such as our home network. How do i fix that?
Hello there, VickFromTX.
A great resource is the following Knowledge Base article that helps troubleshoot Wi-Fi on an iOS device:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Alternatively, you can use one of our iPad Troubleshooting Assistants as well:
Apple - Support - iPad - Wi-Fi Assistant
http://www.apple.com/support/ipad/assistant/wifi/
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D. -
Purchase Requisitin not automatically created at the network level
Hello,
We are facing an issue in the CJ20N
Project- WBS- Network Order- Activity- Materials are attached to it
For ex- Material number 23 is added to the network as per the business process the Purchase requistion will automatically get created.
Now we are facing an issue.
When we add the same material to the activity, the purchase requistion is not created auotmatically, we are not able to view the purchasing data tab.
The moment we add this material, it's stating reservation for network.
Previously it was showing up as purchase requistion for network.
Please help us in knowing what could be the possible reason for this behaviour.
Regards,
prashanthHello,
Thank you for all the answers,
I would need additional info from your end to moveahead with theprocess.
One thing we have observed is when we select a material and try to add it again, the procurement will automatically getting picked up as WE. and we can see the reservation in General data tab.
One more observation initially under the procurement parameters, under the value flow and /quantity flow.
intially it was showing up as 1, now it's showing up as Q
Please let me know where are these configuration done, since i am very new to PS module.
Regards,
Prashanth -
Pulseaudio not automatically switching between output devices
I am using a laptop and I have 3 different output devices on my machine. I have 2 regular output jacks, and a speaker. Whenever I plug-in a headset, pulseaudio happily keeps sending all audio to the speakers. I then have to open pavucontrol and manually switch my output device. This bug does not occur on OpenSUSE or Ubuntu.
Does anyone have any idea about how to fix this?
Mu pulseaudio configuration files are untouched:
/etc/pulse/client:conf http://pastie.org/private/t6sjcou1w90dcey73zpveg
/etc/pulse/daemon.conf http://pastie.org/private/mcmymrx85vuq8l8cmjyjowThe first troubleshooting step for any kind of network "issue" is a complete power cycle of the network. This gives everything a "fresh start" with new connections.
Power off the entire network.....all devices....in any order you want
Wait a minute or two
Start the modem/router first, and let it run a full minute
Start the AirPort Extreme next and let it run a full minute
Keep starting devices one at a time about a minute apart until the entire network is back up
Check the network again with the MBA and report on your results
Do not worry about the iPhone and iPad....they are pretty much hopeless as far as automatically switching from one access point to another....but the MBA should if it is working correctly. -
Reverse Journal in Primary Ledger not auto create to secondard ledger .
Hi ,
I create a 2nd Ledger by Journal conversion Level.
Setup Primary to Secondary Ledger Mapping : Journal Source and Category Conversion
Source Category Transfer Journals to this Secondary Ledger Remove
Other Other Yes
all other journal source & all other journal category "Transfer Journals to this Secondary Ledger" = Yes
Now,
1. Create a P1 journal in Primary Ledger and post .
2. Check 2nd Ledger .
It will automatic create 2nd Ledger P1 journal when Primary ledger journal posted.
3. Reverse P1 journal in Primary Ledger. Generate a new "Reverses P1 Journal" .
4. Post Reversed P1 Journal in Primary Ledger.
5. Check 2nd Ledger.
It does not automatic generate "Reversed P1 Journal " in 2nd Ledger.
I want to make sure why Reverse Journal & post in Primary ledger , It will not automatic create reversed Journal in 2nd Ledger..???Hi,
There is restriction due to difference in period between primary ledger and secondary ledger. The is identified as bug and it now rectified by oracle as per document 428196.1
Thanks & Regards
Niki -
Message no :amoc001 the system couldnt automatically create a transfer docu
hi,
message no :amoc001 the system couldnt automatically create a transfer document
hi all when i follow the steps in this link Message no. AMOC005 i just end up with the problem above
when i tried to change the business area normally the system automatically transfers the amount. but in this asset und. const.
i got this error the system couldnt automatically create a transfer documentDear Friend,
SAP clearly says in the long text of the error message that it is not possible, please transfer to new assets, please see the long text as under:
NA AMOC001
Short Text
Automatic transfer is not possible for asset &1
Diagnosis
You changed assignments to organizational units for asset . The indicator for 'time-independent organizational units' is set for this company code in Asset Accounting Customizing. This means that the system is supposed to create a transfer document automatically.
However, asset manages one of the following:
Open items
Investment measures
Down payments
Therefore, the system could NOT automatically create a transfer document.
System Response
The master data change is not saved.
Procedure
If you want to change the assignment of asset to business area or cost center, you have to manually transfer the asset to a new asset master record.
Hope this will resolve your issue.
Thanks & regards,
Murlidhar Khatri -
LR does not automatically load previews
I use a 5D and a MacBook Pro laptop. I have my source files (RAW files) on an external hard drive. When I return from a shoot I first copy the files to the external harddrive. Then I open LR, right click on the folder in the left panel and select "Synchronize folder". LR perfectly adds the additional images into the database. BUT...
LR does not automatically create previews from the new files. It will only do so when clicking on an image in the film strip. For me it's a problem because I like to take only the laptop with me on the commuter train to work (and leave the external hard drive at home) and then do some selecting while on the train. I cannot select files without a preview.
So... Is there a way to have LR create previews for all images in the database, e.g. by a command?
Thanks.Thank you Lee and Mike. I found the command in the library menu and it works perfectly. And about using the import feature instead of the synchronise feature: I'm a bit worried about getting the files exactly where I want them and so I always copy them using the finder / file explorer to the exact location I want them in. Then I usually check if there are double instances of the files and if I copied all files from my memory card. As soon as I have it all the way I want it I use the synchronise command in LR and it never fails so far. I know I could import using LR and then I'd have the opportunity to select destination folder and such. However, sometimes I leave the files I transferred to my hard drive on my memory card (as backup) until I dock my laptop at my desk where I can back them up on external storage. So it happens a lot that my memory cards contain files I transferred before and I don't want LR to get mixed up with doubles.
Anyway the synchronise command works best for me so far, especially now you helped me find a way to get all files previewed.
Thanks!
Selwin -
Could not create the associated SICF node automatically.
Dear Guru,
I have Encountered an issue while creating a BSP application through SE80\BSP Application.
while I am trying to create a BSP application ( for e.g with name ZSR_BSP_APP_01) it is showing following messge :
SICF Node For ZSR_BSP_APP_01.
Could not create the associated SICF node automatically.
Add a node manually using "HTTP Service Maintenance"
(Transaction SICF)
After creating and activating all the pages of it when i am trying to execute it is showing follwing error in Explorer.
Business Server Page (BSP) error
What happened?
Calling the BSP page was terminated due to an error.
SAP Note
The following error text was processed in the system:
BSP exception: Application sap/zsr_bsp_app_01 cannot be started. Create an application node using Transaction SICF.
Error type:
Your SAP Business Server Pages Team
please guide how to resolve this issue
how i should creade application node for the object ZSR_BSP_APP_01 using transaction Code SICF.
Please guide me through the setp - by - step procedure to perform it.
Thanks & Regards
Saifur Rahamanfindout the way to resolve this
-
TO not getting created Automatically for mvt 311
Hi,
I am facing issue while doing Stock transfer between 2 Sloc. TO is not automatically getting created once i do stock transfer in MB1B for mvt 311.
I checked Tcode OMKX,OMKY,OMKZ, in all of them "A" is maintained in Automatic TO field.
Kindly let me know if i have missed any configuration.
I want to create TO automatically once i do Stock transfer in MB1B.
Please help.
Regards
UtsavHello Utsav,
For WH managed sloc to non WH sloc transfer, use WM movement type 311
For Non WH managed sloc to WH managed sloc transfer, use WM movement type 312
Try following setting. I believe you have following two cases,
Case I
If you are moving the stock from warehouse managed sloc to non warehouse managed sloc do following
(1) OLML->INTERFACE-> LE-WM MTYPE.
Add following setting
Warehouse number, reference movement type 311, WM movement type 311, auto TR flag = X, immediate TO = A
(2) OLML->Activity--> Transfer -
>Define movement type
For WM movement type 311 setting ,
--Destination cat = 921,
--Set background processing Automatic TO indicator = A
(3) Do MB1B- movement type 311 --- and enter receiving sloc as warehouse managed sloc and issuing storage location as non warehouse managed sloc.
With these setting system will create automatic TO from TR. You can then confirm the TO manually.
Case II'
If you have a situation of moving the stock from non-warehouse managed sloc to warehouse managed sloc then proceed as below.
(1) OLML----> Activity -
>Transfer
For WM movement type 312, ((if WM movement type 312 is not present then coped from 311)
Source cat.= 321
(ii) auto TR flag = X, immediate TO = A
(2) OLML ->Interface->Movement type --->LE-WM MTYPE
Add following setting
Warehouse number, reference movement type as 312, WM movement type as 312, Auto TR flag = X, Immediate TO flag = A
(3) Now do MB1B with 312 movement type
Add receiving sloc as warehouse managed sloc and issuing sloc as non warehouse managed sloc
With these setting system will create automatic TO from TR. You can then confirm the TO manually.
Thanks,
Milind -
Internal Order for AUC Asset not getting created Automatically
As per SAP Standard , when I create an AUC Internal Order (KO01), and save , AUC asset is gets created automatically ted via AS01 and stores the AUC Asset in Internal Order settlement rule.
However when tried with the client Im not able to create, AUC is not getting automatically created and stored in Int Order Settlement rule.
In config I have added investment profile to Ord Type and in OAOA ( AUC Asset class setting , Investment profile is also checked)
Kindly let me have your inputs to fix the issue
Advance Thanks
SanjaiHi,
In order to create AUC asset automatically by the system, you need to create an investment profile in OITA.
Then assign this investment profile in the Internal order master data created through KO01 in the Investments tab.
There is no option of assigning the Investment profile in the Order type.
And in OAOA that is Asset class, select the radio button investment measure.
You can default the Asset class of AUC in the investment profile or leave it blank so that same can be filled when system prompts for AUC creation.
You cant see the AUC asset in the settlement rule once Investment order is created, but only after settlement of the balances to the AUC u can see.
Thanks & Regards,
Ravi Kumar -
How to create credit note automatically after PGR?
Hello SD Gurus,
Client's Business Process: Return Order (ZRE, ZPOR, ZARE, and ZMTR) is created with reference to billing document number and item category used for this order type is REN or ZREN. After the order is created, they do PGR (Return Delivery Type is LR) and then credit memo is created "manually". So, the issue with this process is that it is very time consuming and a lot of manual intervention is required.
To-be Process: The requirement is to create credit note "automatically" after the PGR is done to reduce the manual intervention and expedite the process. If item category is REN, then credit note will be created with invoice value. If item category is ZREN, then credit note will be created with Zero Value.
How should I write code in the user exit MV50AFZ1?
Regards,
Mohammed AnwarHi
Apart from Lakshmipathi's suggestion you can share the below logic with your ABAPER. There are two BAPIs we use to create billing automatically. Check whether you can call these BAPIs in userexit you have mentioned in your post.
CALL FUNCTION 'BAPI_BILLINGDOC_CREATEMULTIPLE'
* EXPORTING
* CREATORDATAIN =
* TESTRUN =
* POSTING =
TABLES
billingdatain = billingdatain
conditiondatain = conditiondatain
* CCARDDATAIN =
* TEXTDATAIN =
* ERRORS =
return = return3
success = success
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'.
READ TABLE return3 WITH KEY type = 'E'.
IF sy-subrc = 0.
record-inv_rem = return3-message.
ENDIF.
WAIT UP TO 2 SECONDS.
* READ TABLE return3 WITH KEY type = 'E'.
* IF return3-type = 'E'.
* WRITE:/ return3-message.
* ENDIF.
READ TABLE success INDEX 1.
CLEAR: vbeln_vf.
vbeln_vf = success-bill_doc.
ENDIF.
Thank$ -
Managed Property in Refinement - why not use the automatically-created site column managed property
Hi,
I read that although SharePoint 2013 automatically creates managed property for site column (OWS_Q_TEXT_COLUMNNAME) - in the refinement i should use a managed property and map to the ows_columnname. why?
what's the difefrence?
what is best - to create a new managed property (and set it as refinable) or use the OOB Refinementstring0, Refinementstring1 etc.)?
keren tsurYou are probably talking about this blog post.
http://blogs.technet.com/b/tothesharepoint/archive/2013/11/11/how-to-add-refiners-to-your-search-results-page-for-sharepoint-2013.aspx
The reason you want to use the ows_columnname crawled property is because it is of the correct data type. The other is always text. If the site column is a date or a decimal then using the OWS_Q_TEXT... crawled property,will cause the refiner not to display
the appropriate control, for example a slider control for a date type refiner.
http://sharepointfieldnotes.blogspot.com/2013/05/understanding-and-getting-sharepoint.html
Blog | SharePoint Field Notes Dev Tools |
SPFastDeploy | SPRemoteAPIExplorer
Maybe you are looking for
-
Apple TV will no not connect to iTunes. I need step by step info.
My Apple TV will not connect to iTunes? I need step by step instructions to try and fix this.
-
Best way to handle multiple currencies
I have a requirement that users should be able to report against an OLAP cube in a currency of their choice (from a list of about 20) and was wondering what the best way to handle this might be. One option would be to have a currency dimension contai
-
Flex Cube - Deposits and CASA documentation
Flex Cube - Deposits and CASA documentation: someone could help me to find documentation and information about CA SA and Deposits Flex CUbe MOdule ? Thanks.
-
Built in Insert record wizard php application
Dreamweaver has an built in application object that allows you to insert data from a form directly to a database. After submitting you can go to a web page. In the code there is something like this $insertGoTo = "yourpage.htm". What I would like to d
-
Can't turn off MUTE Sound in System preferences
Mute is checked and its grayed out...so there is no way to turn my sound back on. Yes, another fun thing in Leopard. How do I fix this? Thanks Tracy