Purchase requsitions into table EPRTRANS when using release strategy

Hi,
We are working with release strategy.
It is not passible to insert purchase requsitions into the table EPRTRANS when I choose e.g.a material group which
has been declared as a relevant criteria for release strategy. How can this problem be achived ?
Regards
Alexander
Edited by: AlexanderZiegler on Sep 23, 2009 11:25 AM

pls. comment out this perform
     PERFORM bbp_release_check USING l_xeban
                                     l_yeban
                            CHANGING no_update
                                     now_released.
     IF no_update = 'X'.                   " preq not yet released
       CONTINUE.
     ENDIF.

Similar Messages

Pse 11: How do you transfer a picture into a puzzle when using PSE 11?

How do you transfer a picture into a puzzle when using PSE 11?

Hello,
because I work with PS CC I will give you some links, the first program is expressly made for PSE 11:
PSE11: http://www.panosfx.com/commercial-free-photoshop-actions/puzzle-effects
Here a Adobe Plugin:
Adobe - Photoshop : For Windows : Photoshop CS5 Optional Plugins
These links here may act as examples and maybe you cane use them too
Create Jigsaw Puzzle Effect for Photos - Photoshop Tutorials - CSSCreme.com
http://www.avbros.com/puzzlepro/index.html
https://creative.adobe.com/addons/products/1069#.U_dkQ2NQQs0
http://www.photoshopessentials.com/photo-effects/photoshop-puzzle/
http://www.obsidiandawn.com/jigsaw-puzzle-pieces-photoshop-gimp-brushes
Good luck!
Hans-Günter

AI CS6 vectors turn into embedded image when using clipping mask

AI CS6 vectors turn into embedded image when using clipping mask, how to solve it?

With the Clipping Mask selected go here

Pasted image into gmail disappears when using Safari

Pasted image into gmail disappears when using Safari
I recently upgraded to Mavericks (after having a lot of seemingly unrelated trouble with my Macbook Pro (early 2011))
Since then, when I create a new message in gmail, and paste in a screen shot (captured with command-control-shift-4), the image shows up nicely. But after I hit send, the image disappears. It doesn't show up to the recipient, and when I look at my sent mail, it doesn't show up there either. There's nothing, no icon showing where the image should be, just empty space in the message. This seems to happen in Safari, but seems to works fine when creating the message in Chrome. (please, restrain yourself from telling me "Duh. Use Chrome." I know it's tempting, but my computer has some issues and Chrome doesn't always work.) If I create the same sort of message in Chrome, and then go to Safari gmail, I can see the image just fine. So it appears to be something about keeping the image attached to the content of the message while sending (vs. a viewing problem).
I know when Mavericks was installed, I had to install something in Safari for Adobe docs to show up again. Is there something I need to install so that images will stay attached to the content of gmail messages again?
Thanks

After you click Download (the attachment) from your Safari menu bar click Window / Downloads.
Right or control click the file in the Downloads window then click: Show in Finder
I'm not sure if you can designate another folder for downloading web based attachments to, however, instead of accessing your Gmail
account using Safari, you can set up the Gmail account from the Mail app on your hard drive. Mail preferences allow you to choose the
folder you want to use for downloaded files.
To add an account:
Choose File > Add Account or click the Add button in the Accounts pane of Mail preferences.
Enter information about the user.Mail searches for the information it needs to finish setting up your account. If it can’t find the information, continue to the next step.
Enter information about the incoming and outgoing mail servers, review the account summary, and then click Create.For information about options, click the Help button (looks like a question mark).If you don’t want the account to be active immediately, deselect the “Take account online” checkbox. You can take the account online later.
If you aren’t sure about the information to enter, contact your email service provider before you begin. When you talk with your provider, you can use the Mail settings “cheat sheet” available using the link below to record settings you might need to set up an account. If you’re switching from another application to Mail, use the cheat sheet to record information for each account you want to switch.

URGETNT: REGARDING Purchase Requsition Approval tables

hi,
I am making a report on purchase requsition and i have to display the details of which person has approved it and its date of approval. can anybody tell me which are the tables used in it to display it,example :-
1st Approval - Name of d person Date of Approval
2nd Approval - Name of d person Date of Approval
3rd Approval - Name of d person Date of Approval
Final Approval - Name of d person Date of Approval
this type of details i want to display in my report. if anybody gives me tables and details about it to make d report ,he or she will be definately REWARDED...
Currently i am using table EBAN,EBKN ..
Regards,
Ric.s

Use these table to see who released and description
T16FC - Release code for particular release group
T16FD - Description for Release code
T16FG - Release Groups
T16FH - Descriptions of Release Groups
T16FK - Release Statuses
use BAPI to get release information for PR .
BAPI_REQUISITION_GETRELINFO.
reward points if useful.
Regards,
Vimal
Message was edited by:
 Vimal Kumar

Usage of sequence for uploading data into tables(column store) using CSV

How to make use of sequence when data is uploaded into table(column store) with the CSV file ?

Hi Sharada,
You may have to follow the below steps:
1) To load the data from flat file to a Staging table using IMPORT command
2) You have to call the procedure to load the data further into final Table.
a) Have a look on this procedure to load data :
SAP HANA: Generic Procedure using Arrays to Load delta data into Tables
b) See my reply on the syntax on how to use "Sequence"
Auto-Incrementor in stored procedure!
You will have to ensure that you frame your insert query in such a way to have the sequence number in the target table.
Regards,
Krishna Tangudu

Question about sorted, hashed tables, mindset when using OO concepts...

Hello experts,
I just want to make sure if my idea about sorted and hashed table is correct.Please give tips and suggestions.
In one of my reports, I declared a structure and an itab.
TYPES: BEGIN OF t_mkpf,
 mblnr LIKE mkpf-mblnr,
 mjahr LIKE mkpf-mjahr,
 budat LIKE mkpf-budat,
 xblnr(10) TYPE c,
 tcode2 LIKE mkpf-tcode2,
 cputm LIKE mkpf-cputm,
 blart LIKE mkpf-blart,
 END OF t_mkpf.
it_mkpf TYPE SORTED TABLE OF t_mkpf WITH HEADER LINE
 WITH NON-UNIQUE KEY mblnr mjahr.
Now, I declared it as a sorted table with a non-unique key MBLNR and MJAHR. Now suppose I have 1000 records in my itab. how will it search for a particular record?
2. Is it faster than sorting a standard table then reading it using binary search?
3. How do I use a hashed table effectively? lets say that I want to use hashed type instead of sorted table in my example above.
4. I am currently practicing ABAP Objects and my problem is that I think my mindset when programming a report is still the 'procedural one'. How do one use ABAP concepts effectively?
Again, thank you guys and have a nice day!

Hi Viray,
The different ways to fill an Internal Table:
append&sort
This is the simplest one. I do appends on a standard table and then a sort.
data: lt_tab type standard table of ...
do n times.
ls_line = ...
append ls_line to lt_tab.
enddo.
sort lt_tab.
The thing here is the fast appends and the slow sort - so this is interesting how this will compare to the following one.
read binary search & insert index sy-tabix
In this type I also use a standard table, but I read to find the correct insert index to get a sorted table also.
data: lt_tab type standard table of ...
do n times.
ls_line = ...
read table lt_tab transporting no fields with key ... binary search.
if sy-subrc <> 0.
insert ls_line into lt_tab index sy-tabix.
endif.
enddo.
sorted table with non-unique key
Here I used a sorted table with a non-unique key and did inserts...
data: lt_tab type sorted table of ... with non-unique key ...
do n times.
ls_line = ...
insert ls_line into table lt_tab.
enddo.
sorted table with unique key
The coding is the same instead the sorted table is with a unique key.
data: lt_tab type sorted table of ... with unique key ...
do n times.
ls_line = ...
insert ls_line into table lt_tab.
enddo.
hashed table
The last one is the hashed table (always with unique key).
data: lt_tab type hashed table of ... with unique key ...
do n times.
ls_line = ...
insert ls_line into table lt_tab.
enddo.
You Can use this Program to Test:
types:
begin of local_long,
 key1 type char10,
 key2 type char10,
 data1 type char10,
 data2 type char10,
 data3 type i,
 data4 type sydatum,
 data5 type numc10,
 data6 type char32,
 data7 type i,
 data8 type sydatum,
 data9 type numc10,
 dataa type char32,
 datab type i,
 datac type sydatum,
 datad type numc10,
 datae type char32,
 dataf type i,
 datag type sydatum,
 datah type numc10,
 datai type char32,
 dataj type i,
 datak type sydatum,
 datal type numc10,
 datam type char32,
 datan type i,
 datao type sydatum,
 datap type numc10,
 dataq type char32,
 datar type i,
 datas type sydatum,
 datat type numc10,
 datau type char32,
 datav type i,
 dataw type sydatum,
 datax type numc10,
 datay type char32,
 dataz type i,
 data11 type numc10,
 data21 type char32,
 data31 type i,
 data41 type sydatum,
 data51 type numc10,
 data61 type char32,
 data71 type i,
 data81 type sydatum,
 data91 type numc10,
 dataa1 type char32,
 datab1 type i,
 datac1 type sydatum,
 datad1 type numc10,
 datae1 type char32,
 dataf1 type i,
 datag1 type sydatum,
 datah1 type numc10,
 datai1 type char32,
 dataj1 type i,
 datak1 type sydatum,
 datal1 type numc10,
 datam1 type char32,
 datan1 type i,
 datao1 type sydatum,
 datap1 type numc10,
 dataq1 type char32,
 datar1 type i,
 datas1 type sydatum,
 datat1 type numc10,
 datau1 type char32,
 datav1 type i,
 dataw1 type sydatum,
 datax1 type numc10,
 datay1 type char32,
 dataz1 type i,
end of local_long.
data:
ls_long type local_long,
lt_binary type standard table of local_long,
lt_sort_u type sorted table of local_long with unique key key1 key2,
lt_sort_n type sorted table of local_long with non-unique key key1 key2,
lt_hash_u type hashed table of local_long with unique key key1 key2,
lt_apsort type standard table of local_long.
field-symbols:
<ls_long> type local_long.
parameters:
min1 type i default 1,
max1 type i default 1000,
min2 type i default 1,
max2 type i default 1000,
i1 type i default 100,
i2 type i default 200,
i3 type i default 300,
i4 type i default 400,
i5 type i default 500,
i6 type i default 600,
i7 type i default 700,
i8 type i default 800,
i9 type i default 900,
fax type i default 1000.
types:
begin of measure,
 what(10) type c,
 size(6) type c,
 time type i,
 lines type i,
 reads type i,
 readb type i,
 fax_s type i,
 fax_b type i,
 fax(6) type c,
 iter type i,
end of measure.
data:
lt_time type standard table of measure,
lt_meantimes type standard table of measure,
ls_time type measure,
lv_method(7) type c,
lv_i1 type char10,
lv_i2 type char10,
lv_f type f,
lv_start type i,
lv_end type i,
lv_normal type i,
lv_size type i,
lv_order type i,
lo_rnd1 type ref to cl_abap_random_int,
lo_rnd2 type ref to cl_abap_random_int.
get run time field lv_start.
lo_rnd1 = cl_abap_random_int=>create( seed = lv_start min = min1 max = max1 ).
add 1 to lv_start.
lo_rnd2 = cl_abap_random_int=>create( seed = lv_start min = min2 max = max2 ).
ls_time-fax = fax.
do 5 times.
do 9 times.
 case sy-index.
 when 1. lv_size = i1.
 when 2. lv_size = i2.
 when 3. lv_size = i3.
 when 4. lv_size = i4.
 when 5. lv_size = i5.
 when 6. lv_size = i6.
 when 7. lv_size = i7.
 when 8. lv_size = i8.
 when 9. lv_size = i9.
 endcase.
 if lv_size > 0.
 ls_time-iter = 1.
 clear lt_apsort.
 ls_time-what = 'APSORT'.
 ls_time-size = lv_size.
 get run time field lv_start.
 do lv_size times.
 perform fill.
 append ls_long to lt_apsort.
 enddo.
 sort lt_apsort by key1 key2.
 get run time field lv_end.
 ls_time-time = lv_end - lv_start.
 ls_time-reads = 0.
 ls_time-readb = 0.
 ls_time-lines = lines( lt_apsort ).
 get run time field lv_start.
 do.
 add 1 to ls_time-readb.
 lv_i1 = lo_rnd1->get_next( ).
 lv_i2 = lo_rnd2->get_next( ).
 read table lt_apsort
 assigning <ls_long>
 with key key1 = lv_i1
 key2 = lv_i2
 binary search.
 if sy-subrc = 0.
 <ls_long>-data11 = sy-index.
 endif.
 get run time field lv_end.
 subtract lv_start from lv_end.
 if lv_end >= ls_time-time.
 exit.
 endif.
 enddo.
 get run time field lv_start.
 do.
 add 1 to ls_time-reads.
 lv_i1 = lo_rnd1->get_next( ).
 lv_i2 = lo_rnd2->get_next( ).
 read table lt_apsort
 assigning <ls_long>
 with key key2 = lv_i1
 key1 = lv_i2.
 if sy-subrc = 0.
 <ls_long>-data11 = sy-index.
 endif.
 get run time field lv_end.
 subtract lv_start from lv_end.
 if lv_end >= ls_time-time.
 exit.
 endif.
 enddo.
 get run time field lv_start.
 do fax times.
 lv_i1 = lo_rnd1->get_next( ).
 lv_i2 = lo_rnd2->get_next( ).
 read table lt_apsort
 assigning <ls_long>
 with key key1 = lv_i1
 key2 = lv_i2
 binary search.
 if sy-subrc = 0.
 <ls_long>-data21 = sy-index.
 endif.
 enddo.
 get run time field lv_end.
 ls_time-fax_b = lv_end - lv_start.
 get run time field lv_start.
 do fax times.
 lv_i1 = lo_rnd1->get_next( ).
 lv_i2 = lo_rnd2->get_next( ).
 read table lt_apsort
 assigning <ls_long>
 with key key2 = lv_i1
 key1 = lv_i2.
 if sy-subrc = 0.
 <ls_long>-data21 = sy-index.
 endif.
 enddo.
 get run time field lv_end.
 ls_time-fax_s = lv_end - lv_start.
 collect ls_time into lt_time.
 clear lt_binary.
 ls_time-what = 'BINARY'.
 ls_time-size = lv_size.
 get run time field lv_start.
 do lv_size times.
 perform fill.
 read table lt_binary
 transporting no fields
 with key key1 = ls_long-key1
 key2 = ls_long-key2
 binary search.
 if sy-index <> 0.
 insert ls_long into lt_binary index sy-tabix.
 endif.
 enddo.
 get run time field lv_end.
 ls_time-time = lv_end - lv_start.
 ls_time-reads = 0.
 ls_time-readb = 0.
 ls_time-lines = lines( lt_binary ).
 get run time field lv_start.
 do.
 add 1 to ls_time-readb.
 lv_i1 = lo_rnd1->get_next( ).
 lv_i2 = lo_rnd2->get_next( ).
 read table lt_binary
 assigning <ls_long>
 with key key1 = lv_i1
 key2 = lv_i2
 binary search.
 if sy-subrc = 0.
 <ls_long>-data11 = sy-index.
 endif.
 get run time field lv_end.
 subtract lv_start from lv_end.
 if lv_end >= ls_time-time.
 exit.
 endif.
 enddo.
 get run time field lv_start.
 do.
 add 1 to ls_time-reads.
 lv_i1 = lo_rnd1->get_next( ).
 lv_i2 = lo_rnd2->get_next( ).
 read table lt_binary
 assigning <ls_long>
 with key key2 = lv_i1
 key1 = lv_i2.
 if sy-subrc = 0.
 <ls_long>-data11 = sy-index.
 endif.
 get run time field lv_end.
 subtract lv_start from lv_end.
 if lv_end >= ls_time-time.
 exit.
 endif.
 enddo.
 get run time field lv_start.
 do fax times.
 lv_i1 = lo_rnd1->get_next( ).
 lv_i2 = lo_rnd2->get_next( ).
 read table lt_binary
 assigning <ls_long>
 with key key1 = lv_i1
 key2 = lv_i2
 binary search.
 if sy-subrc = 0.
 <ls_long>-data21 = sy-index.
 endif.
 enddo.
 get run time field lv_end.
 ls_time-fax_b = lv_end - lv_start.
 get run time field lv_start.
 do fax times.
 lv_i1 = lo_rnd1->get_next( ).
 lv_i2 = lo_rnd2->get_next( ).
 read table lt_binary
 assigning <ls_long>
 with key key2 = lv_i1
 key1 = lv_i2.
 if sy-subrc = 0.
 <ls_long>-data21 = sy-index.
 endif.
 enddo.
 get run time field lv_end.
 ls_time-fax_s = lv_end - lv_start.
 collect ls_time into lt_time.
 clear lt_sort_n.
 ls_time-what = 'SORT_N'.
 ls_time-size = lv_size.
 get run time field lv_start.
 do lv_size times.
 perform fill.
 insert ls_long into table lt_sort_n.
 enddo.
 get run time field lv_end.
 ls_time-time = lv_end - lv_start.
 ls_time-reads = 0.
 ls_time-readb = 0.
 ls_time-lines = lines( lt_sort_n ).
 get run time field lv_start.
 do.
 add 1 to ls_time-readb.
 lv_i1 = lo_rnd1->get_next( ).
 lv_i2 = lo_rnd2->get_next( ).
 read table lt_sort_n
 assigning <ls_long>
 with table key key1 = lv_i1
 key2 = lv_i2.
 if sy-subrc = 0.
 <ls_long>-data11 = sy-index.
 endif.
 get run time field lv_end.
 subtract lv_start from lv_end.
 if lv_end >= ls_time-time.
 exit.
 endif.
 enddo.
 get run time field lv_start.
 do.
 add 1 to ls_time-reads.
 lv_i1 = lo_rnd1->get_next( ).
 lv_i2 = lo_rnd2->get_next( ).
 read table lt_sort_n
 assigning <ls_long>
 with key key2 = lv_i1
 key1 = lv_i2.
 if sy-subrc = 0.
 <ls_long>-data11 = sy-index.
 endif.
 get run time field lv_end.
 subtract lv_start from lv_end.
 if lv_end >= ls_time-time.
 exit.
 endif.
 enddo.
 get run time field lv_start.
 do fax times.
 lv_i1 = lo_rnd1->get_next( ).
 lv_i2 = lo_rnd2->get_next( ).
 read table lt_sort_n
 assigning <ls_long>
 with table key key1 = lv_i1
 key2 = lv_i2.
 if sy-subrc = 0.
 <ls_long>-data21 = sy-index.
 endif.
 enddo.
 get run time field lv_end.
 ls_time-fax_b = lv_end - lv_start.
 get run time field lv_start.
 do fax times.
 lv_i1 = lo_rnd1->get_next( ).
 lv_i2 = lo_rnd2->get_next( ).
 read table lt_sort_n
 assigning <ls_long>
 with key key2 = lv_i1
 key1 = lv_i2.
 if sy-subrc = 0.
 <ls_long>-data21 = sy-index.
 endif.
 enddo.
 get run time field lv_end.
 ls_time-fax_s = lv_end - lv_start.
 collect ls_time into lt_time.
 clear lt_sort_u.
 ls_time-what = 'SORT_U'.
 ls_time-size = lv_size.
 get run time field lv_start.
 do lv_size times.
 perform fill.
 insert ls_long into table lt_sort_u.
 enddo.
 get run time field lv_end.
 ls_time-time = lv_end - lv_start.
 ls_time-reads = 0.
 ls_time-readb = 0.
 ls_time-lines = lines( lt_sort_u ).
 get run time field lv_start.
 do.
 add 1 to ls_time-readb.
 lv_i1 = lo_rnd1->get_next( ).
 lv_i2 = lo_rnd2->get_next( ).
 read table lt_sort_u
 assigning <ls_long>
 with table key key1 = lv_i1
 key2 = lv_i2.
 if sy-subrc = 0.
 <ls_long>-data11 = sy-index.
 endif.
 get run time field lv_end.
 subtract lv_start from lv_end.
 if lv_end >= ls_time-time.
 exit.
 endif.
 enddo.
 get run time field lv_start.
 do.
 add 1 to ls_time-reads.
 lv_i1 = lo_rnd1->get_next( ).
 lv_i2 = lo_rnd2->get_next( ).
 read table lt_sort_u
 assigning <ls_long>
 with key key2 = lv_i1
 key1 = lv_i2.
 if sy-subrc = 0.
 <ls_long>-data11 = sy-index.
 endif.
 get run time field lv_end.
 subtract lv_start from lv_end.
 if lv_end >= ls_time-time.
 exit.
 endif.
 enddo.
 get run time field lv_start.
 do fax times.
 lv_i1 = lo_rnd1->get_next( ).
 lv_i2 = lo_rnd2->get_next( ).
 read table lt_sort_u
 assigning <ls_long>
 with table key key1 = lv_i1
 key2 = lv_i2.
 if sy-subrc = 0.
 <ls_long>-data21 = sy-index.
 endif.
 enddo.
 get run time field lv_end.
 ls_time-fax_b = lv_end - lv_start.
 get run time field lv_start.
 do fax times.
 lv_i1 = lo_rnd1->get_next( ).
 lv_i2 = lo_rnd2->get_next( ).
 read table lt_sort_u
 assigning <ls_long>
 with key key2 = lv_i1
 key1 = lv_i2.
 if sy-subrc = 0.
 <ls_long>-data21 = sy-index.
 endif.
 enddo.
 get run time field lv_end.
 ls_time-fax_s = lv_end - lv_start.
 collect ls_time into lt_time.
 clear lt_hash_u.
 ls_time-what = 'HASH_U'.
 ls_time-size = lv_size.
 get run time field lv_start.
 do lv_size times.
 perform fill.
 insert ls_long into table lt_hash_u.
 enddo.
 get run time field lv_end.
 ls_time-time = lv_end - lv_start.
 ls_time-reads = 0.
 ls_time-readb = 0.
 ls_time-lines = lines( lt_hash_u ).
 get run time field lv_start.
 do.
 add 1 to ls_time-readb.
 lv_i1 = lo_rnd1->get_next( ).
 lv_i2 = lo_rnd2->get_next( ).
 read table lt_hash_u
 assigning <ls_long>
 with table key key1 = lv_i1
 key2 = lv_i2.
 if sy-subrc = 0.
 <ls_long>-data11 = sy-index.
 endif.
 get run time field lv_end.
 subtract lv_start from lv_end.
 if lv_end >= ls_time-time.
 exit.
 endif.
 enddo.
 get run time field lv_start.
 do.
 add 1 to ls_time-reads.
 lv_i1 = lo_rnd1->get_next( ).
 lv_i2 = lo_rnd2->get_next( ).
 read table lt_hash_u
 assigning <ls_long>
 with key key2 = lv_i1
 key1 = lv_i2.
 if sy-subrc = 0.
 <ls_long>-data11 = sy-index.
 endif.
 get run time field lv_end.
 subtract lv_start from lv_end.
 if lv_end >= ls_time-time.
 exit.
 endif.
 enddo.
 get run time field lv_start.
 do fax times.
 lv_i1 = lo_rnd1->get_next( ).
 lv_i2 = lo_rnd2->get_next( ).
 read table lt_hash_u
 assigning <ls_long>
 with table key key1 = lv_i1
 key2 = lv_i2.
 if sy-subrc = 0.
 <ls_long>-data21 = sy-index.
 endif.
 enddo.
 get run time field lv_end.
 ls_time-fax_b = lv_end - lv_start.
 get run time field lv_start.
 do fax times.
 lv_i1 = lo_rnd1->get_next( ).
 lv_i2 = lo_rnd2->get_next( ).
 read table lt_hash_u
 assigning <ls_long>
 with key key2 = lv_i1
 key1 = lv_i2.
 if sy-subrc = 0.
 <ls_long>-data21 = sy-index.
 endif.
 enddo.
 get run time field lv_end.
 ls_time-fax_s = lv_end - lv_start.
 collect ls_time into lt_time.
 endif.
enddo.
enddo.
sort lt_time by what size.
write: / ' type | size | time | tab-size | directread | std read | time direct | time std read'.
write: / sy-uline.
loop at lt_time into ls_time.
write: / ls_time-what, '|', ls_time-size, '|', ls_time-time, '|', ls_time-lines, '|', ls_time-readb, '|', ls_time-reads, '|', ls_time-fax_b, '|', ls_time-fax_s.
endloop.
form fill.
lv_i1 = lo_rnd1->get_next( ).
lv_i2 = lo_rnd2->get_next( ).
ls_long-key1 = lv_i1.
ls_long-key2 = lv_i2.
ls_long-data1 = lv_i1.
ls_long-data2 = lv_i2.
ls_long-data3 = lv_i1.
ls_long-data4 = sy-datum + lv_i1.
ls_long-data5 = lv_i1.
ls_long-data6 = lv_i1.
ls_long-data7 = lv_i1.
ls_long-data8 = sy-datum + lv_i1.
ls_long-data9 = lv_i1.
ls_long-dataa = lv_i1.
ls_long-datab = lv_i1.
ls_long-datac = sy-datum + lv_i1.
ls_long-datad = lv_i1.
ls_long-datae = lv_i1.
ls_long-dataf = lv_i1.
ls_long-datag = sy-datum + lv_i1.
ls_long-datah = lv_i1.
ls_long-datai = lv_i1.
ls_long-dataj = lv_i1.
ls_long-datak = sy-datum + lv_i1.
ls_long-datal = lv_i1.
ls_long-datam = lv_i1.
ls_long-datan = sy-datum + lv_i1.
ls_long-datao = lv_i1.
ls_long-datap = lv_i1.
ls_long-dataq = lv_i1.
ls_long-datar = sy-datum + lv_i1.
ls_long-datas = lv_i1.
ls_long-datat = lv_i1.
ls_long-datau = lv_i1.
ls_long-datav = sy-datum + lv_i1.
ls_long-dataw = lv_i1.
ls_long-datax = lv_i1.
ls_long-datay = lv_i1.
ls_long-dataz = sy-datum + lv_i1.
ls_long-data11 = lv_i1.
ls_long-data21 = lv_i1.
ls_long-data31 = lv_i1.
ls_long-data41 = sy-datum + lv_i1.
ls_long-data51 = lv_i1.
ls_long-data61 = lv_i1.
ls_long-data71 = lv_i1.
ls_long-data81 = sy-datum + lv_i1.
ls_long-data91 = lv_i1.
ls_long-dataa1 = lv_i1.
ls_long-datab1 = lv_i1.
ls_long-datac1 = sy-datum + lv_i1.
ls_long-datad1 = lv_i1.
ls_long-datae1 = lv_i1.
ls_long-dataf1 = lv_i1.
ls_long-datag1 = sy-datum + lv_i1.
ls_long-datah1 = lv_i1.
ls_long-datai1 = lv_i1.
ls_long-dataj1 = lv_i1.
ls_long-datak1 = sy-datum + lv_i1.
ls_long-datal1 = lv_i1.
ls_long-datam1 = lv_i1.
ls_long-datan1 = sy-datum + lv_i1.
ls_long-datao1 = lv_i1.
ls_long-datap1 = lv_i1.
ls_long-dataq1 = lv_i1.
ls_long-datar1 = sy-datum + lv_i1.
ls_long-datas1 = lv_i1.
ls_long-datat1 = lv_i1.
ls_long-datau1 = lv_i1.
ls_long-datav1 = sy-datum + lv_i1.
ls_long-dataw1 = lv_i1.
ls_long-datax1 = lv_i1.
ls_long-datay1 = lv_i1.
ls_long-dataz1 = sy-datum + lv_i1.
endform.".
Thanks & Regards,
YJR.

How to load the data from excel file into table in oracle using UTL_FI

How to load the data from excel file into table in oracle
and from table to excel file
using UTL_FILE package
Please give me some example

This is something i tried in oracle apex
http://avdeo.com/2008/05/21/uploading-excel-sheet-using-oracle-application-express-apex/
Regards,
CKLP

EPRTRANS - PR items release strategy

Hi gurus,
I'm working in SRM 5.0, ECS, backend ECC 6.0.
I need to set up the 'Plan Driven Procurement scenario'.
In ECC I created entries in V_T160EX and V_T160PR and I have mantained TBE11 and TBE31 accordingly to SAP note 656597.
I used ME51N to create a purchase requisition (without items release strategy) which is getting copied to EPRTRANS table.
A purchase requisitions (with items release strategy) is getting copied to EPRTRANS table when I Save the PR?
or when I release the single items?
Points will be rewarded
Thanks in advance
Gg

Hi Disha,
you said:
The table EPRTRANS will be populated only when all the items(which have a release strategy) in the PR will be released.
Do you mean that if a PR contains two items (both with release strategy) and only the first has been released, EPRTRANS will not be populated until I release the second item?
Is that correct?
Thanks in advance
Points will be rewarded
Gg

'...' not appearing in obscured table cell when using custom renderer.

Hello all -
I am using a custom JPanel as a cell renderer in a JTable to display two icons per cell. Unfortunately, I am running into a problem that occurs when resizing a column such that the width of the column is less than the size of the cell content. Normally, when resizing a cell in this manner, it will start to cut off the text within the cell and add '...' to signify that some material is obscured. However, using my cell renderer, the text simply cuts off with no indication whatsoever there is more content that is being hidden. I have tried looking through the JComponent code to find a function to overload but I haven't had much luck. Does anyone have any suggestions?
For a simple example, compile and run the following code and try resizing the two columns. You should be able to notice the difference.
Thanks,
- Alex
import java.awt.*;
import java.awt.image.*;
import java.util.*;
import javax.swing.*;
import javax.swing.table.*;
public class TwoIcons extends JFrame {
     public static void main(String[] args){
          createIcons();
          SwingUtilities.invokeLater
               new Runnable()
                    public void run() {
                         new TwoIcons();
     public TwoIcons(){
          super("Test");
          DefaultTableModel tm = new DefaultTableModel(
               new Object[][]{
                    {new IconPair("cross", "cross"), "just a string"},
                    {new IconPair("circle", "cross"),"just another string"},
                    {new IconPair("String", "circle"),"yet another string"}
               }, new String[]{"Two Icons","String"}){
               public Class getColumnClass(int columnIndex){
                    if(columnIndex==0){
                         return IconPair.class;
                    else
                         return super.getColumnClass(columnIndex);
          JTable table = new JTable(tm);
          final Color bg = table.getBackground();
          table.setDefaultRenderer(IconPair.class, new TableCellRenderer(){
                    RendererPanel renderer = new RendererPanel(bg);
                    public Component getTableCellRendererComponent(JTable table, Object value, boolean isSelected, boolean hasFocus, int row, int column) {
                         renderer.setIcons((IconPair)value);
                         return renderer;
          JScrollPane scp = new JScrollPane(table);
          add(scp);
          setSize(400,100);
          setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          pack();
          setVisible(true);
     class RendererPanel extends JPanel{
          JLabel icon1, icon2;
          RendererPanel(Color bg){
               setLayout(new BoxLayout(this,BoxLayout.LINE_AXIS) );
               icon1=new JLabel();
               icon2=new JLabel();
               add(icon1);
               add(icon2);
               setBackground(bg);
          public void setIcons(IconPair value) {
               icon1.setIcon(value.i1);
               icon1.setToolTipText("Icon 1");
               icon2.setIcon(value.i2);
               icon2.setToolTipText("Icon 2");
               //uncomment next 2 lines if you want text as well
               icon1.setText(value.s1);
               icon2.setText(value.s2);
     class IconPair {
          public Icon i1,i2;
          public String s1,s2;
          IconPair(String s1, String s2){
               this.i1=(Icon)icons.get(s1);
               this.i2=(Icon)icons.get(s2);
               this.s1=s1;
               this.s2=s2;
     static Map icons = new HashMap();
     public static void createIcons(){
          Image img = new BufferedImage(10,10, BufferedImage.TYPE_INT_ARGB);
          Graphics2D g2=(Graphics2D)(img.getGraphics());
          g2.setColor(Color.BLUE);
          g2.drawLine(0,0,10,10);
          g2.drawLine(0,10,10,0);
          icons.put("cross",new ImageIcon(img));
          img = new BufferedImage(10,10, BufferedImage.TYPE_INT_ARGB);
          g2=(Graphics2D)(img.getGraphics());
          g2.setColor(Color.ORANGE);
          g2.drawOval(1,1,8,8);
          icons.put("circle",new ImageIcon(img));
}

Things aren't resizable in your layout for the custom renderer. Here's your code working as you want (I think)
import java.awt.*;
import java.awt.image.*;
import java.util.*;
import javax.swing.*;
import javax.swing.table.*;
public class TwoIcons extends JFrame {
     public static void main(String[] args){
          createIcons();
          SwingUtilities.invokeLater
               new Runnable()
                    public void run() {
                         new TwoIcons();
     public TwoIcons(){
          super("Test");
          DefaultTableModel tm = new DefaultTableModel(
               new Object[][]{
                    {new IconPair("cross", "cross"), "just a string"},
                    {new IconPair("circle", "cross"),"just another string"},
                    {new IconPair("String", "circle"),"yet another string"}
               }, new String[]{"Two Icons","String"}){
               public Class getColumnClass(int columnIndex){
                    if(columnIndex==0){
                         return IconPair.class;
                    else
                         return super.getColumnClass(columnIndex);
          JTable table = new JTable(tm);
          final Color bg = table.getBackground();
          table.setDefaultRenderer(IconPair.class, new TableCellRenderer(){
                    RendererPanel renderer = new RendererPanel(bg);
                    public Component getTableCellRendererComponent(JTable table, Object value, boolean isSelected, boolean hasFocus, int row, int column) {
                         renderer.setIcons((IconPair)value);
                         return renderer;
          JScrollPane scp = new JScrollPane(table);
          getContentPane().add(scp);
          setSize(400,100);
          setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          pack();
          setVisible(true);
     class RendererPanel extends JPanel{
          JLabel icon1, icon2;
          RendererPanel(Color bg){
               setLayout(new BoxLayout(this,BoxLayout.LINE_AXIS) );
               icon1=new JLabel();
               icon2=new JLabel();
               add(icon1);
               add(icon2);
               icon1.setMinimumSize(new Dimension(0, 0));
               icon2.setMinimumSize(new Dimension(0, 0));
               icon1.setMaximumSize(new Dimension(Integer.MAX_VALUE, Integer.MAX_VALUE));
               icon2.setMaximumSize(new Dimension(Integer.MAX_VALUE, Integer.MAX_VALUE));
               setBackground(bg);
          public void setIcons(IconPair value) {
               icon1.setIcon(value.i1);
               icon1.setToolTipText("Icon 1");
               icon2.setIcon(value.i2);
               icon2.setToolTipText("Icon 2");
               //uncomment next 2 lines if you want text as well
               icon1.setText(value.s1);
               icon2.setText(value.s2);
     class IconPair {
          public Icon i1,i2;
          public String s1,s2;
          IconPair(String s1, String s2){
               this.i1=(Icon)icons.get(s1);
               this.i2=(Icon)icons.get(s2);
               this.s1=s1;
               this.s2=s2;
     static Map icons = new HashMap();
     public static void createIcons(){
          Image img = new BufferedImage(10,10, BufferedImage.TYPE_INT_ARGB);
          Graphics2D g2=(Graphics2D)(img.getGraphics());
          g2.setColor(Color.BLUE);
          g2.drawLine(0,0,10,10);
          g2.drawLine(0,10,10,0);
          icons.put("cross",new ImageIcon(img));
          img = new BufferedImage(10,10, BufferedImage.TYPE_INT_ARGB);
          g2=(Graphics2D)(img.getGraphics());
          g2.setColor(Color.ORANGE);
          g2.drawOval(1,1,8,8);
          icons.put("circle",new ImageIcon(img));
}Note that the ... is a function of the JLabel when it is too small to render its text.

Problem with table-indexes when using select-options in select

Hello experts,
is it right that table-indexes will not be used if you take select-options to select data from the database?
in detail:
i have build up an table-index for one of our db-tables and test it via an test-programm. The first test with '=' comparisons worked fine. Every key of the index was used; checked via ST05!
e.g.: SELECT * FROM TABLEA INTO ITAB WHERE keya = '1' AND keyb = '2' AND keyc = '3'.
Now i startet the test with select-options
e.g.: SELECT * FROM TABLEA INTO ITAB WHERE keya IN seltabA AND keyb IN seltabB AND keyc IN seltabC.
First of all i just filled the seltabs with only 1 value: eg: seltabA= SIGN = 'I' OPTION = 'EQ' LOW = '1' etc.
Everything worked fine. Every key of the index was used.
But now, I putted more than one entries in the seltabs e.g.
seltabA: SIGN = 'I' OPTION = 'EQ' LOW = '1'
 SIGN = 'I' OPTION = 'EQ' LOW = '2'
 SIGN = 'I' OPTION = 'EQ' LOW = '3'
From now on, the indexed was not used completely (with all keys).
Isn't that strange? How can i use select-options or sel-ranges with using the complete table-indexes?
Thanks a lot,
Marcel

Hi Hermann,
i hope this helps:
this is the first one, which uses the complete index:
SELECT
"KOWID" , "LIFNR" , "KLPOS" , "ORGID" , "KOART" , "MATNR" , "GLTVON" ,
"GLTBIS" , "WERT" , "ABLIF" , "FAKIV" , "AENAM" , "AEDAT" , "AFORM" ,
"HERSTELLER" , "ARTGRP" , "OE_FREITXT" , "ARTFREITEXT" , "STATUS" ,
"TERDAT"
FROM
"/dbcon/01_con"
WHERE
"MANDT" = ? AND "LIFNR" = ? AND "ORGID" = ? AND "KOART_BASIS" = ? AND
"STATUS" = ? AND "GEWAEHR_KOWID" < ? AND ( "STATUS" = ? OR "STATUS" = ? OR
"STATUS" = ? ) WITH UR
RESULT: 5 IXSCAN /dbcon/01_con05 #key columns: 4
And the second one, which does not use the complete index! The 3 ranges are filled each with 2 values. Remember; when i fill them each with only one value, the result is the same as you can see above(/dbcon/01_con05 #key columns: 4):
SELECT
"KOWID" , "LIFNR" , "KLPOS" , "ORGID" , "KOART" , "MATNR" , "GLTVON" ,
"GLTBIS" , "WERT" , "ABLIF" , "FAKIV" , "AENAM" , "AEDAT" , "AFORM" ,
"HERSTELLER" , "ARTGRP" , "OE_FREITXT" , "ARTFREITEXT" , "STATUS" ,
"TERDAT"
FROM
"/dbcon/01_con"
WHERE
"MANDT" = ? AND "LIFNR" IN ( ? , ? ) AND "ORGID" IN ( ? , ? ) AND
"KOART_BASIS" IN ( ? , ? ) AND "GEWAEHR_KOWID" < ? AND ( "STATUS" = ? OR
"STATUS" = ? OR "STATUS" = ? ) WITH UR
and here the access-plan
 0 SELECT STATEMENT ( Estimated Costs = 5,139E+01 [timerons] )
5 1 RETURN
5 2 NLJOIN
5 3 [O] TBSCAN
5 4 SORT
5 TBSCAN GENROW
5 6 FETCH /dbcon/01_con
7 IXSCAN /dbcon/01_con05 #key columns: 2
As you can see, only 2 keys were taken for indexed selection!
Any idea?
Kind regards,
MArcel
Edited by: Marcel Ebert on Jul 28, 2009 5:25 PM

How to avoid full Table scan when using Rule based optimizer (Oracle817)

1. We have a Oracle 8.1.7 DB, and the optimizer_mode is set to "RULE"
2. There are three indexes on table cm_contract_supply, which is a large table having 28732830 Rows, and average row length 149 Bytes
COLUMN_NAME INDEX_NAME
PROGRESS_RECID XAK11CM_CONTRACT_SUPPLY
COMPANY_CODE XIE1CM_CONTRACT_SUPPLY
CONTRACT_NUMBER XIE1CM_CONTRACT_SUPPLY
COUNTRY_CODE XIE1CM_CONTRACT_SUPPLY
SUPPLY_TYPE_CODE XIE1CM_CONTRACT_SUPPLY
VERSION_NUMBER XIE1CM_CONTRACT_SUPPLY
CAMPAIGN_CODE XIF1290CM_CONTRACT_SUPPLY
COMPANY_CODE XIF1290CM_CONTRACT_SUPPLY
COUNTRY_CODE XIF1290CM_CONTRACT_SUPPLY
SUPPLIER_BP_ID XIF801CONTRACT_SUPPLY
COMMISSION_LETTER_CODE XIF803CONTRACT_SUPPLY
COMPANY_CODE XIF803CONTRACT_SUPPLY
COUNTRY_CODE XIF803CONTRACT_SUPPLY
COMPANY_CODE XPKCM_CONTRACT_SUPPLY
CONTRACT_NUMBER XPKCM_CONTRACT_SUPPLY
COUNTRY_CODE XPKCM_CONTRACT_SUPPLY
SUPPLY_SEQUENCE_NUMBER XPKCM_CONTRACT_SUPPLY
VERSION_NUMBER XPKCM_CONTRACT_SUPPLY
3. We are querying the table for a particular contract_number and version_number. We want to avoid full table scan.
SELECT /*+ INDEX(XAK11CM_CONTRACT_SUPPLY) */
rowid, pms.cm_contract_supply.*
FROM pms.cm_contract_supply
WHERE
contract_number = '0000000000131710'
AND version_number = 3;
However despite of giving hint, query results are fetched after full table scan.
Execution Plan
0 SELECT STATEMENT Optimizer=RULE (Cost=1182 Card=1 Bytes=742)
1 0 TABLE ACCESS (FULL) OF 'CM_CONTRACT_SUPPLY' (Cost=1182 Card=1 Bytes=742)
4. I have tried giving
SELECT /*+ FIRST_ROWS + INDEX(XAK11CM_CONTRACT_SUPPLY) */
rowid, pms.cm_contract_supply.*
FROM pms.cm_contract_supply
WHERE
contract_number = '0000000000131710'
AND version_number = 3;
and
SELECT /*+ CHOOSE + INDEX(XAK11CM_CONTRACT_SUPPLY) */
rowid, pms.cm_contract_supply.*
FROM pms.cm_contract_supply
WHERE
contract_number = '0000000000131710'
AND version_number = 3;
But it does not work.
Is there some way without changing optimizer mode and without creating an additional index, we can use the index instead of full table scan?

David,
Here is my test on a Oracle 10g database.
SQL> create table mytable as select * from all_tables;
Table created.
SQL> set autot traceonly
SQL> alter session set optimizer_mode = choose;
Session altered.
SQL> select count(*) from mytable;
Execution Plan
   0      SELECT STATEMENT Optimizer=CHOOSE
   1    0   SORT (AGGREGATE)
   2    1     TABLE ACCESS (FULL) OF 'MYTABLE' (TABLE)
Statistics
          1 recursive calls
          0 db block gets
         29 consistent gets
          0 physical reads
          0 redo size
        223 bytes sent via SQL*Net to client
        276 bytes received via SQL*Net from client
          2 SQL*Net roundtrips to/from client
          0 sorts (memory)
          0 sorts (disk)
          1 rows processed
SQL> analyze table mytable compute statistics;
Table analyzed.
SQL> select count(*) from mytable
2 ;
Execution Plan
   0      SELECT STATEMENT Optimizer=CHOOSE (Cost=11 Card=1)
   1    0   SORT (AGGREGATE)
   2    1     TABLE ACCESS (FULL) OF 'MYTABLE' (TABLE) (Cost=11 Card=1
          788)
Statistics
          1 recursive calls
          0 db block gets
         29 consistent gets
          0 physical reads
          0 redo size
        222 bytes sent via SQL*Net to client
        276 bytes received via SQL*Net from client
          2 SQL*Net roundtrips to/from client
          0 sorts (memory)
          0 sorts (disk)
          1 rows processed
SQL> disconnect
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - 64bit Production
With the Partitioning, Oracle Label Security, OLAP and Data Mining options

Adobe Flash Player won't install into Firefox, even when using the offline installer, and downloading it through Firefox

Ever since the latest update of the Adobe Flash Player, I think it came out this week.
I can't seem to get it to work with Firefox, I have downloaded the installer, it installs successfully, then I check in Firefox to see if it works. It says that I need to install it?!?! I have tried the offline installer of the Adobe Flash Player, I also tried installing it through Firefox (when you click "Install missing plugins"). That just fails instantly.
I posted on the Adobe Forums, but no luck.
I am getting frustrated with this! I have never had problems with installing the Flash Player, and I didn't install this version any different from the previous versions. Flash Player was working well until the latest update of Flash Player was released.
If I go to C:\Windows\System32\Macromed\Flash, it shows all the Flash Player files, but it's not showing up in the Firefox addon manager, and not working on YouTube, or any other Flash Player sections of sites.
I installed the 64-bit version, because I have a 64-bit Windows.
It works on IE, but not on Firefox.
It seems like it installs fine, but then it doesn't looks like it "installs" it into Firefox. Or whatever...
Also, I have tried uninstalling it with the Adobe 64-bit Uninstaller, restarting my PC after uninstalling, then install the 64-bit Flash Player for Firefox... doesn't work.
I have done EVERYTHING I can do to try and get it to work, no luck...
Please, any help with be appreciated!

Where can I find direct downloads of Flash Player 11 for Windows or Macintosh?

Cant sign into twitter except when using a new privacy window

I am having a problem signing into my twitter except when I use the "new privacy window" tab. Then I can sign in without any issues

This issue can be caused by corrupted cookies or cookies that are blocked.
*check the permissions on the about:permissions page and in "Tools > Page Info > Permissions"
*https://support.mozilla.org/kb/fix-login-issues-on-websites-require-passwords
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
If clearing cookies didn't help then it is possible that the cookies.sqlite file that stores the cookies got corrupted.
*Rename (or delete) cookies.sqlite (cookies.sqlite.old) and delete other present cookies files like cookies.sqlite-journal in the Firefox profile folder in case the file cookies.sqlite got corrupted.
You can use this button to go to the currently used Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
*http://kb.mozillazine.org/Profile_folder_-_Firefox

One question in measures table heading of a pivot table view when using 11g

Hi experts,
I have been working on OBIEE 10g for 2 years, and lately I started developing on OBIEE 11g. It is great to discover so many new features which make reporting so much easier and look better, meanwhile, I got confused by some detail changes they have made. I was able to overcome most of the difficulties I have met with, but now there is *1* I can not figure out. Any idea or suggestion is appreciated.
In OBIEE 10g, when we develop a report using a pivot table, we put column A and B in Rows aera and column C Measures aera, the result would look like this:
/ / A / / B / / C / /
//VA1 //VB1// VC1//
//VA1// VB1 //VC1//
But now I am using 11g, when I put these columns in the same aeres as I did in 10g, the result is surprising like this:
/ / BLANK / / C / /
/ / A / / B / / blank //
//VA1 //VB1/|/ VC1//
//VA1/|/VB1 // VC1//
It looks weird that it should put Rows labels and Measure labels in different lines and create blank labels, and barely makes any sense. I am OK with the blank above the Row labels, but not with the blank below the measure label. A blank label that separates a label and its value is not what I want.
Can anyone help me to make the pivot table look the same as it does in 10g? Or at least remove the blank label below the Measure label?
Thanks in advance.

Hi,
I am facing the same issue, have you solved it?

Purchase requsitions into table EPRTRANS when using release strategy

Similar Messages

Maybe you are looking for