Pushing the data through proxy to ECC Developement as well as to quality

Hi all,
I need to push the data throug proxy from XI to ECC(developement system) at the same time to ECC(quality system)
What do we need to do from XI?
Thank you

In most setups you would have a DEV ECC box which points to DEV PI box and a QUAL ECC which points to a QUAL PI box . So in SPROXY of ECC you would be able to see the interfaces from either DEV or QUAL .
So, my assumtion is that you will not be able to do this unless both ECC boxes point to the same PI box. If tht is the case, you need to just add both ECC Bus Sys in the receiver determination and create 2 interface determinations.

Similar Messages

Pushing OM data through RHALEINI

Hi Friends,
We are pushing OM data through report RHALEINI. We have one requirement to lock some OM data. For example, there is one posiion which we dnt want to send at one time and our report is scheduled in batch job to send all change data. Is there any way to restrict one position, it can be many poistion or other objects. So we are looking some kind of config/lock option on object, so it should not process by report RHALEINI.
Thanks for your help.
Br,
Piyush

Hi Piyush,
If you are sure about which are the positions to be excluded then just mention those position ids in the exclude numbers tab and create a variant. You can use the same variant so that the position ids what you have given there would be excluded when you do the batch job processing and you need not to give them again and again.
Will this work for you?
Kind Regards,
Ravi.
Edited by: muktha ravi kumar on Jun 3, 2011 4:30 PM

I am receiving the data through the rs232 in labview and i have to store the data in to the word file only if there is a change in the data and we have to scan the data continuasly how can i do that.

i am receiving the data through the rs232 in labview and i have to store the data in to the word or text file only if there is a change in the data. I have to scan the data continuasly. how can i do that. I was able to store the data into the text or word file but could not be able to do it. I am gettting the data from rs232 interms of 0 or 1. and i have to print it only if thereis a change in data from 0 to 1. if i use if-loop , each as much time there is 0 or 1 is there that much time the data gets printed. i dont know how to do this program please help me if anybody knows the answer

I have attatched the vi. Here in this it receives the data from rs232 as string and converted into binery. and indicated in led also normally if the data 1 comes then the led's will be off. suppose if 0 comes the corresponding data status is wrtten into the text file. But here the problem is the same data will be printed many number of times. so i have to make it like if there is a transition from 1 to o then only print it once. how to do it. I am doing this from few weeks please reply if you know the answer immediatly
thanking you
Attachments:
MOTORTESTJIG.vi ‏729 KB

Error, while pushing the data from Oracle to MSSQL.

Hi,
I am facing the below error, while pushing the data from Oracle to MSSQL.
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Transparent gateway for MSSQL][Microsoft][ODBC SQL Server Driver][SQL Server]Update or insert of view or function 'View_Name' failed because it contains a derived or constant field.[Microsoft][ODBC SQL Server Driver][SQL Server]Statement(s) could not be prepared. (SQL State: 00000; SQL Code: 8180)
Please suggest me, how to overcome from this.
Thanks.

[email protected] wrote:
Hi,
I am facing the below error, while pushing the data from Oracle to MSSQL.
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Transparent gateway for MSSQL][Microsoft][ODBC SQL Server Driver][SQL Server]Update or insert of view or function 'View_Name' failed because it contains a derived or constant field.[Microsoft][ODBC SQL Server Driver][SQL Server]Statement(s) could not be prepared. (SQL State: 00000; SQL Code: 8180)
Please suggest me, how to overcome from this.
Thanks.This is an error from SQL Server being passed back to Oracle so you can see the problem.
What it is saying is that you are trying to insert (or update) data to a database view and that view contains a column that is either a constant (literal) value or is derived (a calculation, formula or string concatenation etc.).
As such, you can't insert or update data on that column because it has nowhere to go on the database table(s) that underly the view.

How to push the data from PSA to Data Target in 3.5 version

Hi Experts,
I'm currently working on BI 7. I have some master data load being maintained in 3.5 version.
The infopackage has an option to load the data to psa and data target when extracted.
I want to stage the data at PSA only.
Later I want to trigger it to the target.
In 7 version we use DTP but I'm not very sure what should I do here.
Can anyone please help me to push the data to the target please using 3.5 version.
Thanks

Hi pathak,
Thanks for your reply. I'm able to do it.
Can you please tell me how do I filter the load to target.
We have filter in DTP where i can restrict the load.
Do we have any option in 3.5.
Please advice.
Thanks

Is it possible to import less than ALL of the data from a PDF form developed on LiveCycle?

Is it possible to import less than ALL of the data from a PDF form developed on LiveCycle?

Please ask in the LiveCycle Designer forum.

CIFing the data from APO to ECC

Hi - I know how to CIFing the data from ECC to APO. But i would like to know how to transfer the data from APO to ECC.I also would like to know how to debug the code...I see some of the questions in this forum on CIF debugging, but they are all CIFing the data from ECC to APO, but i need the other way around ( APO to ECC )
Could anyone provide me the detail steps to CIF debugging ?
I really appreciate your help.

Hi
What kind of data do you want to transfer from APO to ECC ? Lets say you want to transfer live cache reqs generated by APO to R/3 and create firmed reqs , then the following are the prerequisites
1. Make the publication setting /n/sapapo/cp1 as mentioned by DB
2. Make sure the material -plant for which you want to transfer reqs is active in the PO/ Preq integration model in R/3
3. In APO /n/sapapo/sdp110 make sure the transfer setting is set to immediate.
Once all this is done , you dont have to do anything manually. The reqs will get transferred to R/3 automatically.
Also we have to transfer master data from R/3 to APO since R/3 is the master and i dont think it is possible to do the opposite - transfer of master data from APO- R/3 (no standard tool available) . Also we generally transfer only live cache reqs and PIR's (demand plan) back to R/3 . For PIR's you need to use the transfer profile.
Thanks
Aparna
Edited by: Aparna.Ranganathan on Feb 11, 2011 5:21 PM

Printing the datas through Crystal Report from Java

How can I Print the datas through Crystal Report from java?

How can I Print the datas through Crystal Report from
java?
What the hell are "the datas"?
Jesus, I can understand this is a shrinking planet, Global community, and all that happy horse pucky. Typos or small grammar errors are no big deal, I make them all the time. But when I have to spend more time interpretting the question than figuring out the answer, it drives me crazy.

Can anyone confirm the date used for pushing the data into AR interface table? Is it abse don Actual ship date or scheduled ship date?

Can anyone confirm the date used for pushing the data into AR interface table? Is it abse don Actual ship date or scheduled ship date? We are facing a scenario where trx date is lower than the actual ship to which logically sounds incorrect.
Appreciate any quick response around this.

Hi,
Transaction date will be your autoinvoice master program submission level date (If you haven't setup any logic.
Please check the program level default date, if user enter old date ststem will pick the same.
Customer is trying to set the value of the profile OM:Set receivables transaction date as current date for non-shippable lines at the responsiblity level. System does not set the transaction date to current date in ra_interface_lines_all.
CAUSE
Customer has used the functionality in R11i. But after the upgrade to R12, the system functions differently than R11i.
SOLUTION
1.Ensure that there are no scheduled workflow background process run.
2.Set the profile "OM: Set Receivables Transaction Date as Current Date for Non-Shippable Lines" at Responsibility level only as Yes.
3.Now switch the responsibility to which the profile is set.
4.Create order for Non-Shippable Lines and progress it to invoicing.
5.Ensure that the 'workflow background process' concurrent program is run in the same responsibility and this line is considered in it.
6.Now check if the 'SHIP_DATE_ACTUAL' is populated to ra_interface_lines_all

Need to load the data through excel for plan data through IP?

Hi all,
The user needs to load the data through the excel and click on the save button so that the data is saved in the cube through integrated planning.
The objects used are
customer, material, plant, calendarmonth sales qty, gross billing!!
Can anyone pls let me know how to do this?
Thanks

Hi,
You can use the following How to guide to load data from file into transactional cube.
If using IP :
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90cef248-29e0-2910-11bb-df8dece7e22c?quicklink=index&overridelayout=true
Can also Refer to Marc's Blog:
/people/marc.bernard/blog/2007/11/25/how-to-load-a-file-into-sap-netweaver-bi-integrated-planning-part-1
If you are using bPS you can get the details in Wiki also for the same.
You can then create the hyperlink in Excel ,which user can use to upload data which can then be saved to cube using save button.

My mobile Was stolen and i erase the data through app find my iphone but I want to Destroy the hard disk What shall i do ?

Dear Sir,
i bought iphone 6 plus 2 months ago from Apple store in UK.
And it Was stolen 5 days ago in Paris and I erase the data through ( app find my iphone ).
but I want to Destroy the hard disk What shall i do ?
Please i need your help.
Best regards
Alaa Baeshen

Dear sir,
DO you have any idea how to get delivery report for the sent messages ?
Or receipt messages ?
Thanks
Best regards

Need validation when insert the data through AddAnotherRow functionality

hi All,
i need to validate customer id when i insert the data through AddAnotherRow functionality in AdvancedTable.
CO:
if ("AdvanceTabRN".equals(pageContext.getParameter(SOURCE_PARAM)) && ADD_ROWS_EVENT.equals(pageContext.getParameter(EVENT_PARAM)))
am.insrtCustcondtls();
AM:(For Inserting the Data based on EO Based VO)
public void insrtCustcondtls()
XxcurTradeCustomerDtlsEOVOImpl CrteVO=getXxcurTradeCustomerDtlsEOVO1();
Number cust_seq=getOADBTransaction().getSequenceValue("customer_id_seq");
CrteVO.setMaxFetchSize(0);
Row row=CrteVO.createRow();
CrteVO.insertRow(row);
row.setNewRowState(Row.STATUS_INITIALIZED);
Here Customer ID is Primary key.
if customer id is already in the table then i need to throw an exception like customer id is already existing or we need to throw an exception.
Thanks,
Mallik.

Hi Mallik,
Our doDml() method fires when you try to issue commit if you want to validate data at commit then just add the code in the Entity Object Class as I posted in previous post or if you want to validate records with data at add new Row button then you can follow the following aproach.
1. create a data base pl/sql function which take the customer id as input and return 1 if the customer already existed or 0 if not existed.
2. Now we can call this database function at Add new Row button
i. if it returns 1 then we will throw Exception.
ii. if it return 0 then we will let the record save in data base.
The following code will help you.
private String getCustomerId(OAPageContext pageContext,
OAWebBean webBean, String customerID) {
OAApplicationModule am =
(OAApplicationModule)pageContext.getApplicationModule(webBean);
OADBTransaction transaction = (OADBTransaction)am.getOADBTransaction();
String value = null;
CallableStatement cs = null;
try {
String plSqlStatement =
"begin :1 := nameOfYourFunction(" + customerID +
"); end;";
System.out.println(plSqlStatement);
cs = transaction.createCallableStatement(plSqlStatement, 0);
System.out.println("got executed");
cs.registerOutParameter(1, Types.CHAR);
cs.executeUpdate();
value = cs.getString(1).toString();
return value;
} catch (Exception e) {
e.printStackTrace();
return value;
Finally you can call this method as follow
if ("AdvanceTabRN".equals(pageContext.getParameter(SOURCE_PARAM)) && ADD_ROWS_EVENT.equals(pageContext.getParameter(EVENT_PARAM)))
String custID;
am.insrtCustcondtls();
custID=getCustomerId(pageContext,webBean,customerID)
if(custID.equals("1")) {
throw new OAException("Your message");
Now its up to you which aproach you follow.
Haroon.

Down load the data through BDC

Hi ,
I need to know how to down load the data through BDC , pls suggest me how we can do through data download through only BDC u2013 with datas-- Act group, Sales area ,customer pricing procedure ,shipping condition of customer master.
If you need ant further information pls let me know
Regards
Shivas

http://help.sap.com/saphelp_47x200/helpdata/en/67/42fcccf61011d1bcf9080009b4534c/frameset.htm
http://www.sapunleashed.co.uk/bdc/bdc_recording.htm
http://myweb.dal.ca/hchinni/sap/bdc_home.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/bdc&
http://www.sap-img.com/abap/learning-bdc-programming.htm
http://www.sapdevelopment.co.uk/bdc/bdchome.htm
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://help.sap.com/saphelp_47x200/helpdata/en/69/c250684ba111d189750000e8322d00/frameset.htm
http://www.sapbrain.com/TUTORIALS/TECHNICAL/BDC_tutorial.html
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm
call Transaction or session method ?
http://myweb.dal.ca/hchinni/sap/bdc_home.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/bdc&
http://www.sap-img.com/abap/learning-bdc-programming.htm
http://www.sapdevelopment.co.uk/bdc/bdchome.htm
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://help.sap.com/saphelp_47x200/helpdata/en/69/c250684ba111d189750000e8322d00/frameset.htm
http://www.sapbrain.com/TUTORIALS/TECHNICAL/BDC_tutorial.html
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm

How to assign a button for attachment and send the data through browser ?

Hi friends,
How to convert to browser ?
how to assign a button for attachment and send the data through browser ?
Thanking you.
Regards
Subash.

Refer to
How to create a text box in ascreen painter?
where another user (venkateshwar reddy) has asked a very similar question...
Jonathan

Synching the data between MDM and ECC

Hi All,
We have been on SAP MDM Central Master Data Management scenario for more then a year now. In the pas we have seen many issues ike - Syndication server failures, idoc failures due to which the data is not 100% in synch between MDM and ECC.
Though we are working on the idoc failure tracking process but my question is this -
I need to create an automated program which runs on a weekly basis finds the data which is out of synch in MDM and FEP and gives me the same. So the logic should be something like this - Pick up the records updated during the last week in MDM, look for those records in ECC. Compare field by field and give me the delta.
Since it is a central master data management scenario hence there are cases in which records are created in MDM but not present in ECC may be because of syndication failures or idoc failures.
Any one worked n a similar sort of program/logic? Kindly let me know your experiences as well in efforts to keep the data in synch.
Regards,
Indraveer

Hello Indraveer
Yes you can do it.
You can configure exchange between ECC and MDM by schedule directly or through PI
or
SAP MDM 7.1 has own API for ABAP, JAVA, .NET. (5.5 for ABAP,JAVA, .COM)
That may be abap transaction or java(.net) application is working by schedule.
more about MDM API you can read here:
ABAP
http://help.sap.com/saphelp_nwmdm71/helpdata/en/48/edff445128209ce10000000a42189d/frameset.htm
JAVA and .NET
http://help.sap.com/saphelp_nwmdm71/helpdata/en/13/041975d8ce4d4287d5205816ea955a/frameset.htm
JavaDocs
http://help.sap.com/javadocs/MDM71/index.html
Regards
Kanstantsin Chernichenka

Pushing the data through proxy to ECC Developement as well as to quality

Similar Messages

Maybe you are looking for