Put away to production lines directly, storage location control WM

We are Using Storagelocation Control Functionality in WM
We have below Storage locations
RW01 - Raw Material Storing
PD01 - Materials staged for Production Lines
I have setup 001 as Standard Storage location and 002 as 'not copied to TR'
Few materials are received directly to production lines instead of going to Raw material storage
PO--> GR is posted for PD01
Now TR got generated but doesnt have storage location in it, this is fine as per functionality
When i try to convert to TO it is copying MP01 since it it standard storage location
This is where we are getting 902 negative entries for MP01
No TR creation but bin to bin transer only solution ????

Any pointers ???

Similar Messages

  • How to change the line item storage location during the sales order creatio

    How to change the line item storage location during the sales order creatio

    Hi Kumar,
    I think you can just delete it in the sales order directly, if you are using make-to-order scenario, then there will be special stock left for the sales order as the production has been goods receipt, you need to use MM transaction move the stock to unrestricted use stock. If you are using make-to-stock scenario, there should be no further problem. If you are using assembly order, please try to reject the sales order item to see if it could fullfill your requirement.
    Regards,
    Rachel

  • Reg Storage location control when pulled materials via fixed bin replenishm

    We are Using Storagelocation Control Functionality in WM
    We have below Storage locations
    RW01 - Raw Material Storing
    PD01 - Materials staged for Production Lines
    I have setup RW01 as Standard Storage location and PD01 as 'not copied to TR'
    When i try to do bin to bin tranfer raw material to production lines From Bin in RW01 to Bin in PD01, TO has RW01 as expected, i Run posting change background job and this functionality is working fine
    We would be using Fixed bin replenishment strategy to stage materials for productions from raw materials storage
    I run LP21 for PD01, it has created TR but has storage location PD01 instead of RW01.
    PD01 shouldnt have copied as i have set 'Not to be copied to TR' for PD01
    Fixed bin replenishment doesnt support storage location control? does we need to go for customization ?
    Please help

    Please help
    Bin to Bin is working fine as per storage location control functionality set-up
    We have issue with fixed bin replenishment combined with storage location control
    Please share your inputs, Thank you
    While debugging we relaixed SAP doesnt check storage location control config at all while doing fixed bin replenishment, only custom solution to force system to check storage location control config and assign storage location is TR?
    Edited by: Sasi nagireddy on Jul 18, 2011 8:34 AM

  • Storage Location Control at customer level

    Dear All,
    Need a Customer wise Storage location control.
    Eg.
    Customer Name: ABCD
    Storage Location: FG01
    Customer Name: WXYZ
    Storage Location: FG02
    Regards,
    Saravanan E

    Hi,
    I am not sure but Explore STOCK DETERMINATION topic,
    IMG >> MM >> Inventory management & Physicl inventory >> Define strstegies for stock determination
    where define stock determination group and Rule
    Assign it header and Item level
    On item level maintain storage location and for FG01 - put priority 1 and FG02 - Put priority 2
    Assign stock determination rule to Application - Delivery.
    check whether it works with batch.
    I also update you if working fine.
    Kapil

  • Storage Location Control and ATP

    Hello Experts,
    I have activated the storage location control for the putaway process and is working fine for MM and WM perspective. The following are happening without any problem:
    1. Doing a GR to the virtual Storage Location and this storage location is blank in TR.
    2. The stock from the virtual storage location is considered in MRP while planning.
    3. TO creation from TR and doing putaway in real storage bin and Transfer posting 311 at IM level.
    The requirement is: The stock from the virtual storage location should not be considered in the ATP while creating a sales order. At the moment, ATP is considering this stock as available and confirming to a date immediately but in reality it should not up until the putaway is complete. And I think this is the sole purpose of having Storage Location Control in place.
    I did my research in this fourm and looked at the Warehouse Management Guide and it says "This means that for the duration of the putaway process, the stock for putaway is either not visible at all or clearly visible as stock that can not be picked, depending on the configuration of the availability check."
    Can someone help me understand what to check or uncheck in ATP? Or should I post this question in the ERP-SD forum?
    Appreciate you help.
    Regards
    Narottam

    Hi,
    I believe your mistake is here:
    "800 K15 0800 8001 411 check box is checked "
    The combination should read
    800 902 0800 8001
    The storage type is the interim storage type, that is where the posting shall happen. And if you leave out the check box it happens automatically.
    But why movement type 411? This usually should be 311.
    Best regards
    Juergen

  • Storage location control

    Hi,
    Based on our current requirement, the moment we create a sales order, an out bound delivery and TO should get create automatically, if stock is available. We are successfully acheiving this functionality. But system is creating out bound deliveries for the stock in GR interim area, and failing to create TO, since stock is not available in WH.
    To avoid this, we are trying to use storage location control functionality. With this process we are facing below two problems.
    We could not able set up configuration for multiple IM movemnt type for a storage type
    number two the GR reversal process (with mvt 102) is not working. It is working when we do not confirm the TO which got created due GR posting with mvt 101. But when we confirm the TO and try to cancel material document in IM, WM process not completing.
    Please advice.
    With regards,
    Prabhakar

    >
    prabhakar pisapati wrote:
    > Hi,
    >
    > Based on our current requirement, the moment we create a sales order, an out bound delivery and TO should get create automatically, if stock is available. We are successfully acheiving this functionality. But system is creating out bound deliveries for the stock in GR interim area, and failing to create TO, since stock is not available in WH.
    > 
    > To avoid this, we are trying to use storage location control functionality. With this process we are facing below two problems.
    >
    > We could not able set up configuration for multiple IM movemnt type for a storage type
    > number two the GR reversal process (with mvt 102) is not working. It is working when we do not confirm the TO which got created due GR posting with mvt 101. But when we confirm the TO and try to cancel material document in IM, WM process not completing.
    >
    > Please advice.
    >
    > With regards,
    >
    > Prabhakar
    Your cycle is: Sales order -> outbound delivery (automatic) -> picking of outbound delivery (automatic) -> Confirmation of TO (automatic).
    It appears that in your system, the GR interim area is a separate storage location, and the warehouse is in a different storage location. So your technique of setting picking storage location is correct. 
    The IM movement in standard is 601, and the WM movement is also 601 During picking, the system is trying to pick up stock from the storage type mentioned in the storage type search strategy. If stocks are present there, then a TO will get created and confirmed.
    It is not clear why you require multiple IM movemnt type for a storage type. I am afraid I havent understood your current setup.
    Problem 2: GR reversal not working
    When a GR is done, a 101 IM movement calls a 101 WM movement, and the stock gets moved to a storage type based on the search strategy. When this is cancelled via 102, a 102 WM movement is triggered (in standard). In case this is not happening in your system then you will have to check the problem.
    Try posting the 102 movement material document, and then create the TO against the mat doc using LT06. You will be able to see the problem (TR not created / immediate TO creation not configured / immediate confirmation not set).
    Regards,
    Aroop

  • WM Storage Location control problem - no TR created in receiving warehouse

    Hi all,
    I have configured the system to perform a 311 mvt from sloc 4002 to sloc 0010. Both Slocs have different warehouse numbers assigned.
    The transfer is working fine, however in the receiving warehouse no TR is being generated even though I am using the standard *** 311 movement type which has create TR flag set.
    If I disable the config and perform the 311 in MIGO after confirming the TR in the sending warehouse, the stock is moved to the new warehouse and a TR is created.
    Has anyone experienced this before?
    Mark

    2nd entry in storage location control is ZF2 501 DE01 0010 311 
    1st case:The entry.e. ZF2 501 DE01 0010 311  seems to be wrong.
    Your warehouse storage location 0010 is managed with ZF4 and not ZF2.
    But in this case, the way you created entries concludes that you want to transfer the stock from one Sloc to other Sloc which have separate warehouses.
    i feel your approach to excute this scenario seems to be not a valid one. I don't understand why you are running this process as WM transaction followed by IM document. You said that you are creating the transfer order first.. must be with wm mvt 311 in LT01. Standard WM mvt 311 doesn't allows manual TO creation.Your both storage locations are assigned to different warehouses. You should post the movement in IM first, then follow the WM activities.
    2nd case:If you say that ZF2 is correct, then your storage location is wrong, it should be  4002 instead of 0010  and you are transferring stock from one storage type to other storage within same warehouse.
    If you want to do this scenarion as WM followed by IM, then please change the Wm mvt 311 in ZF2 to allow manual TO creation.
    In movement type properties, set the destination storage type as 501.
    Strorage location control should be ZF2 501 DE01 4002 311
    Please let me know your thoughts on this.
    Regards,
    Santosh

  • Storage location control, storage location ref.

    Hello all,
    I am new in WM,
    Can anyone please explain me the  *_Storage location control function_*  and *Storage location ref* with the exmple in detail.
    Go for this path if required:-
    Spro-- log execution-- warehouse mang- interfaces inventory mang-- Define storage location control..
    Please help me...
    Abhinay Waikar.

    Hi,
    I;'ve used it for the following:
    Standard inbound deliveries to be received in storage location 1000. After finishing the TO in WM, the material is transferred from SLOC 1000 to 1010. In the sales orders, 1010 is taken into account and 1000 is disregarded. I.e. stock in 1000 is not seen as available.
    In this case available stock is indeed available, also in WM.
    MdZ

  • Plant n storage location control

    Hi all,
    how can we control the plant and storage location control?
    If I creaet PO for one plant, I must not create PO to other plant.
    Thanks

    Hi,
    You have created PO for ONE plant only, but one plant have multiple storage location and also created PO to multiple storage location in one purchase order based on authorization.
    Plant and storage location control through authorization of create,edit/change,display,print  of PO.
    Hope, it is useful for you.
    Regards,
    K.Rajendran

  • Production Order - Invalid storage location

    Hello,
    I have made a production order through mrp for a halb. The issue is that when I try to release the order it gives me a message that "storage location 3603 is invalid for material nthl****". In MM03 -> MRP2 in Issue stor. location the correct value of 3603 is showing. Material availability check on the production order is also ok. Please help.
    Regards

    During Availabiltiy Check it will check the issuing Raw Material/another halb - so no link
    You are saying in MMSC that storage Location is extended to 3603- ok no issue
    More over in MRP2 view you are saying the "Production Storage Location" with 3603 (here for this it will be behave as Receiving Storage Location) - ok no issue
    check in the Production Order "Good Receipt" subscreen GR Storage Location is "3603"
    Check whether the 3603 storage location is specific for the Plant to the Material it has extended *
    ( or is there a confusion with number zero and letter"O")
    Prabakaran K

  • IW41 - Storage Location Control (User Exit)

    Hi,
    While I'm trying to use function Goods Movement in PM order confirmation, I only want to consume ingredients from one storage location.
    Is there any user exit for this control?
    Thank & Regards,
    Begum

    Hi Venkatesan,
    Thanks for your reply. We first try to use the user exit CMFU0002 - Set parameters for time confirmation and goods movements. However, the system doesn't see this user exit while we are trying to consume materials from a storage location.
    Best regards,
    Begü

  • Production order put away in WM

    Is it possible to directly put-away a production receipt to a Bin? Meaning if i do a CO11N it will confirm to Storage type 100 and bin ABC directly without going through the interim Bin which is the storage type 902 and production order number?
    I don't think its possible based on what I know but I want to confirm.
    Does it have to go through the interim bin in 902?
    <removed by moderator, read the forum rules>
    Message was edited by: Jürgen L

    Hi, this will work but I'm not convinced it would be the best solution as all materials would be placed into bin ABC and you would have to transfer everything out to the correct bin.
    I think it would be better to flag the mvt for auto TO and amend the receiving storage type so that placement confirmation is not required. The defined search strategies and any capacity checks would then be utailised, along with the individual bin numbers from the MMR.
    Cheers

  • Storage location & backflush must be automatically set in Production order

    Hi Guru's ,
    While creating production order the storage location and backflush for the Components (ROH Articles) inside the Production order are manually selected.
    Is there any way, where i can set them (storage location and backflush) as a default whenever i create a Producton order ???  This means whenever i enter the components in a production order the system must automatically show the Storage Location and backflush as ticked.
    Pls help on this thing ....
    Best Regards,
    Gurpreet Singh Saini.

    Hi,
    To set the backflush always then in the material master MRP2 view set backflush " Always".
    To set the automatic storage location then you can define the "Stock determination group".
    This is will be help full if ur keeping material in more then one storage location.
    If you are keeping in the single storage location then in the MRP2 view maintain the storage location in the "production storage location " filed.
    Regards
    Vijay

  • Storage Location In Goods Receipt.

    Hi experts!
    In automatic goods receipt for Production Orders, the storage location to the good movements is defined in material master (MRP2 - Production Storage Location), and copied to Production Order during the creation.
    I have some semi-finished materials that can be used to produce more then one finished materials, where the goods issue for this material are executed in diferent storage location. I want that the storage location to SFP goods receipt is defined in accordance with your use in the next production line (FP).
    Example:
    Material 10 (SFP). This material is component of the material 20 (FP) and material 30 (FP). In production of the material 20, the goods issue storage location is A. In production of the material 30, the goods issue storage location is B. If the Production Order of the material 10 is created to reservation of the Material 20, the storage location defined in Production Order of the material 10 is A. If reservation of the material 30, storage location B.
    In short, i want know that is possible change the goods receipt storage location automatically, looking the next Production Order goods issue storage location.
    MTS Environment.
    Picking by MF60 is not a option, we need send the material directly to the next goods issue storage location.
    Any suggestion?
    Thanks a lot.
    Best Regards,
    RMS

    Hi,
    I can think of three things to check which determines storage location automatically.
    Please go through each of these things and check what is applied to your scenario.
    1) Check whether you have given production storage location in MRP2 view of material.
    If you maintain prod sto loc at material level of SFP, it will be copied to all the production orders for all the FPs.
    e.g. for Material 10 (SFP) you maintained prod stor loc (Lets say A sto loc) at MRP2 view, Sto loc A will be copied to all the production orders of both FPs Material 20 and Material 30.
    2) Check whether in the work center you have assigned a supply area, supply area is usually assigned to storage location.
    3) Check BOM of that material, go in to each of the component details and go to "Status/long text" tab and check whether you have assigned supply area or production storage location.
    If you maintain it at the BOM item level, sto loc will be copied from here.
    e.g.
    In BOM details of Material 20 (FP), go to BOM Item details of Material 10 (SFP) and maintain sto loc A in  supply area or production storage location of Status/long text" tab.
    It will copy prod sto loc A for all the production order of Material 20 (FP)
    In BOM details of Material 30 (FP), go to BOM Item details of Material 10 (SFP) and maintain sto loc B in  supply area or production storage location of Status/long text" tab.
    It will copy prod sto loc B for all the production order of Material 30 (FP)
    I think this is what you want, you can maintain diff sto locations in BOM as explained above, It should solve your issue.
    I hope this explanation is sufficient to solve your problem.
    Do revert in case you need more explanation.
    Regards,
    Abhay Kapase
    Edited by: AbhayKapase on Aug 7, 2011 7:38 AM

  • Block Storage Location from MIRO

    Hi,
    We have a scenario wherein certain rejections are posted under Rejected Storage Location.
    QM would decide, whether the said material should be returned to vendor or can be used for some sub-grade production process.
    Now, the client wants to put a MIRO block for such storage location, which would have to be manually removed once the decision is taken.
    Please suggest, how can MIRO be blocked for a particular storage location.

    Hi,
    Thanks for the response.
    I think first option is better.. i.e. to block MIRO at QM level itself. Can you please let me know what is the transaction /path for defining these control keys?
    In case of other option, how can a FI person be able to know that the stock is rejected at the time of MIRO. He would have to manually check the stock position and then do the MIRO and payment block.
    Please suggest.

Maybe you are looking for