PXA_NO_SHARED_MEMORY Solaris 10
Dear Experts,
I had installed SAP IDES 6.0 on Solaris 10. HW Configuration is 32 GB 4 Ultrasparc CPU, SWAP Space allocated 50 GB, In the same server i have installed SolMan EhP1 assigining RAM of 10 GB and For IDES i have assigned 17 GB RAM..
I have changed the Instance Profile parameters abap/buffersize to 50000 after that i am getting PXA_NO_SHARED_MEMORY dump..
During the installation as per the inst guide i have added the proj and user details in /etc/user_attr & /etc/project for 2 instances..
When i am checking the sappfpar it showing 3 errors found.. can you please check the below for the sappfpar parameters and let me know what are the parameters that i need to change..
I have set these parameters ipc/shm_psize_10 - 124000000, ipc/shm_psize_40 - 122000000
/usr/sap/ID3/SYS/exe/run/sappfpar check pf=/usr/sap/ID3/SYS/profile/inbbssun02_ID3_02 nr=02 name=inbbssun02 | more
/usr/sap/ID3/SYS/exe/run/sappfpar=>sapparam(2): fopenU("/usr/sap/ID3/SYS/profile/inbbssun02_ID3_02","r"): No such file or directory
/usr/sap/ID3/SYS/exe/run/sappfpar=>No Profile used.
================================================================================
== Checking profile: <no_profile>
================================================================================
***ERROR: Maximum shared memory segment size exceeded
================================================================
Shared memories exceeding size limit
Key: 6 Size: 319488000 ( 304.7 MB) ABAP program buffer
Key: 8 Size: 67108964 ( 64.0 MB) Paging buffer
Key: 9 Size: 134217828 ( 128.0 MB) Roll buffer
Key: 62 Size: 85983232 ( 82.0 MB) Memory pipes
Shared memory pools exceeding size limit
Key: 10 Size: 128000000 ( 122.1 MB) Pool
Key: 40 Size: 112000000 ( 106.8 MB) Pool for database buffers
SOLUTIONS: (1) reconfigure your operating system for shared memory
segment size of 512.0 MB minimum
(2) configure smaller SAP buffers
(3) locate shared memories out of pool with parameters
like: ipc/shm_psize_<key> =0
***ERROR: Size of shared memory pool 10 too small
================================================================
SOLUTIONS: (1) Locate shared memory segments outside of pool 10
with parameters like: ipc/shm_psize_<key> =0
***ERROR: Size of shared memory pool 40 too small
================================================================
SOLUTIONS: (1) Locate shared memory segments outside of pool 40
with parameters like: ipc/shm_psize_<key> =0
Shared memory disposition overview
================================================================
Shared memory pools
Key: 10 Pool
Size configured.....: 19880000 ( 19.0 MB)
Size min. estimated.: 124095554 ( 118.3 MB)
Advised Size........: 128000000 ( 122.1 MB)
Key: 40 Pool for database buffers
Size configured.....: 14250000 ( 13.6 MB)
Size min. estimated.: 108975040 ( 103.9 MB)
Advised Size........: 112000000 ( 106.8 MB)
Shared memories inside of pool 10
Key: 11 Size: 500000 ( 0.5 MB) Factory calender buffer
Key: 12 Size: 6000000 ( 5.7 MB) TemSe Char-Code convert Buf.
Key: 13 Size: 60500000 ( 57.7 MB) Alert Area
Key: 14 Size: 4400000 ( 4.2 MB) Presentation buffer
Key: 16 Size: 22400 ( 0.0 MB) Semaphore activity monitoring
Key: 17 Size: 2672386 ( 2.5 MB) Roll administration
Shared memories inside of pool 40
Key: 42 Size: 7232992 ( 6.9 MB) DB TTAB buffer
Key: 43 Size: 32534392 ( 31.0 MB) DB FTAB buffer
Key: 44 Size: 7958392 ( 7.6 MB) DB IREC buffer
Key: 45 Size: 4886392 ( 4.7 MB) DB short nametab buffer
Key: 46 Size: 20480 ( 0.0 MB) DB sync table
Key: 47 Size: 3073024 ( 2.9 MB) DB CUA buffer
Key: 48 Size: 300000 ( 0.3 MB) Number range buffer
Key: 49 Size: 2968344 ( 2.8 MB) Spool admin (SpoolWP+DiaWP)
Shared memories outside of pools
Key: 1 Size: 2500 ( 0.0 MB) System administration
Key: 2 Size: 5987176 ( 5.7 MB) Disp. administration tables
Key: 3 Size: 13714400 ( 13.1 MB) Disp. communication areas
Key: 4 Size: 503248 ( 0.5 MB) statistic area
Key: 6 Size: 319488000 ( 304.7 MB) ABAP program buffer
Key: 7 Size: 14838 ( 0.0 MB) Update task administration
Key: 8 Size: 67108964 ( 64.0 MB) Paging buffer
Key: 9 Size: 134217828 ( 128.0 MB) Roll buffer
Key: 18 Size: 917604 ( 0.9 MB) Paging adminitration
Key: 19 Size: 30000000 ( 28.6 MB) Table-buffer
Key: 30 Size: 3072 ( 0.0 MB) Taskhandler runtime admin.
Key: 31 Size: 1806000 ( 1.7 MB) Dispatcher request queue
Key: 33 Size: 10240000 ( 9.8 MB) Table buffer, part.buffering
Key: 41 Size: 25010000 ( 23.9 MB) DB statistics buffer
Key: 51 Size: 3200000 ( 3.1 MB) Extended memory admin.
Key: 52 Size: 40000 ( 0.0 MB) Message Server buffer
Key: 54 Size: 4202496 ( 4.0 MB) Export/Import buffer
Key: 55 Size: 8192 ( 0.0 MB) Spool local printer+joblist
Key: 57 Size: 1048576 ( 1.0 MB) Profilparameter in shared mem
Key: 58 Size: 4096 ( 0.0 MB) Enqueue ID for reset
Key: 62 Size: 85983232 ( 82.0 MB) Memory pipes
Key: 63 Size: 409600 ( 0.4 MB) ICMAN shared memory
Key: 64 Size: 4202496 ( 4.0 MB) Online Text Repository Buf.
Key: 65 Size: 4202496 ( 4.0 MB) Export/Import Shared Memory
Key: 1002 Size: 400000 ( 0.4 MB) Performance monitoring V01.0
Key: 58900102 Size: 4096 ( 0.0 MB) SCSA area
Nr of operating system shared memory segments: 28
Shared memory resource requirements estimated
================================================================
Total Nr of shared segments required.....: 28
System-imposed number of shared memories.: 220
Shared memory segment size required min..: 319488000 ( 304.7 MB)
System-imposed maximum segment size......: 50331648 ( 48.0 MB)
Max. shared memory segment size advised..: 536870912 ( 512.0 MB)
Swap space requirements estimated
================================================
Shared memory....................: 910.5 MB
..in pool 10 19.0 MB, 624% used !!
..in pool 40 13.6 MB, 764% used !!
..not in pool: 679.7 MB
Processes........................: 29.0 MB
Extended Memory .................: 4092.0 MB
Total, minimum requirement.......: 5031.5 MB
Process local heaps, worst case..: 1907.3 MB
Total, worst case requirement....: 6938.8 MB
Errors detected..................: 3
Warnings detected................: 0
Please let me know what are the parameters that needs to be changed..
Mahesh
Hi Markus,
1. projects -l $(projects -d id3adm)
ID3
projid : 600
comment: "SAP System ID3"
users : id3adm
oraid3
groups : (none)
attribs: process.max-sem-nsems=(priv,2048,deny)
project.max-sem-ids=(priv,1024,deny)
project.max-shm-ids=(priv,256,deny)
project.max-shm-memeory=(priv,18446744073709551615,deny)
2. projects -d id3adm
ID3
3. ps -eo user,pid,ppid,project,args
USER PID PPID PROJECT COMMAND
root 0 0 system sched
root 1 0 system /sbin/init
root 2 0 system pageout
root 3 0 system fsflush
root 337 335 system /usr/sadm/lib/smc/bin/smcboot
root 7 1 system /lib/svc/bin/svc.startd
root 9 1 system /lib/svc/bin/svc.configd
daemon 138 1 system /usr/lib/crypto/kcfd
root 137 1 system devfsadmd
root 133 1 system /usr/lib/picl/picld
tmpuser 1780 1777 default /usr/lib/ssh/sshd
root 426 1 system /usr/sbin/vold -f /etc/vold.conf
root 269 1 system /usr/sbin/cron
root 207 1 system /usr/lib/efcode/sparcv9/efdaemon
root 117 1 system /usr/lib/sysevent/syseventd
root 286 7 system /usr/lib/saf/sac -t 300
root 299 1 system /usr/lib/utmpd
id3adm 2391 2349 ID3 dw.sapID3_DVEBMGS02 pf=/usr/sap/ID3/SYS/profile/ID3_DVEBMGS02_inbbssun02
root 132 1 system /usr/sbin/nscd
root 336 335 system /usr/sadm/lib/smc/bin/smcboot
root 233 1 system /usr/lib/inet/xntpd
daemon 276 1 system /usr/sbin/rpcbind
root 300 7 system /usr/lib/saf/ttymon -g -d /dev/console -l console -T sun -m ldterm,ttcompat -h
root 339 1 system /usr/lib/fm/fmd/fmd
root 335 1 system /usr/sadm/lib/smc/bin/smcboot
root 293 1 system /usr/platform/SUNW,Sun-Fire-V890/lib/sf880drd
root 1198 350 default /usr/lib/ssh/sshd
root 379 320 system /usr/sbin/rpc.metad
root 338 1 system /usr/sbin/syslogd
root 350 1 system /usr/lib/ssh/sshd
root 1767 1203 user.root -sh
root 319 286 system /usr/lib/saf/ttymon
root 320 1 system /usr/lib/inet/inetd start
root 375 1 system /usr/sbin/mdmonitord
tmpuser 1201 1198 default /usr/lib/ssh/sshd
root 506 1 system /usr/dt/bin/dtlogin -daemon -udpPort 0
rs7adm 799 1 system /usr/sap/RS7/SCS01/exe/sapstartsrv pf=/usr/sap/RS7/SYS/profile/START_SCS01_inbb
rs7adm 993 1 system /usr/sap/RS7/DVEBMGS00/exe/sapstartsrv pf=/usr/sap/RS7/SYS/profile/START_DVEBMG
tmpuser 1203 1201 default -sh
root 1777 350 default /usr/lib/ssh/sshd
id3adm 1182 1 system /usr/sap/ID3/DVEBMGS02/exe/sapstartsrv pf=/usr/sap/ID3/SYS/profile/START_DVEBMG
root 1557 1 ID3 /usr/sap/ID3/SYS/exe/run/saposcol
id3adm 1786 1782 ID3 -csh
oraid3 1759 1 ID3 /oracle/ID3/102_64/bin/tnslsnr LISTENERID3 -inherit
id3adm 2392 2349 ID3 co.sapID3_DVEBMGS02 pf=/usr/sap/ID3/SYS/profile/ID3_DVEBMGS02_inbbssun02 -F
id3adm 2390 2349 ID3 ms.sapID3_DVEBMGS02 pf=/usr/sap/ID3/SYS/profile/ID3_DVEBMGS02_inbbssun02
tmpuser 1782 1780 default -sh
id3adm 2349 1 ID3 /usr/sap/ID3/DVEBMGS02/exe/sapstart pf=/usr/sap/ID3/SYS/profile/START_DVEBMGS02
oraid3 2139 1 ID3 ora_pmon_ID3
oraid3 2141 1 ID3 ora_psp0_ID3
oraid3 2143 1 ID3 ora_mman_ID3
oraid3 2145 1 ID3 ora_dbw0_ID3
oraid3 2147 1 ID3 ora_dbw1_ID3
oraid3 2149 1 ID3 ora_dbw2_ID3
oraid3 2151 1 ID3 ora_dbw3_ID3
oraid3 2153 1 ID3 ora_lgwr_ID3
oraid3 2155 1 ID3 ora_ckpt_ID3
oraid3 2157 1 ID3 ora_smon_ID3
oraid3 2159 1 ID3 ora_reco_ID3
oraid3 2161 1 ID3 ora_cjq0_ID3
oraid3 2163 1 ID3 ora_mmon_ID3
oraid3 2165 1 ID3 ora_mmnl_ID3
oraid3 2285 1 ID3 ora_q000_ID3
oraid3 2171 1 ID3 ora_qmnc_ID3
orars7 2936 1 RS7 ora_q000_RS7
rs7adm 3089 1 RS7 /usr/sap/RS7/SCS01/exe/sapstart pf=/usr/sap/RS7/SYS/profile/START_SCS01_inbbssu
id3adm 2393 2349 ID3 se.sapID3_DVEBMGS02 pf=/usr/sap/ID3/SYS/profile/ID3_DVEBMGS02_inbbssun02 -F
id3adm 2394 2349 ID3 ig.sapID3_DVEBMGS02 -mode=profile pf=/usr/sap/ID3/SYS/profile/ID3_DVEBMGS02_inb
id3adm 2397 2394 ID3 /usr/sap/ID3/DVEBMGS02/exe/igsmux_mt -mode=profile -restartcount=0 pf=/usr/sap/
oraid3 2396 1 ID3 ora_q001_ID3
id3adm 2398 2394 ID3 /usr/sap/ID3/DVEBMGS02/exe/igspw_mt -mode=profile -no=0 -restartcount=0 pf=/usr
id3adm 2399 2394 ID3 /usr/sap/ID3/DVEBMGS02/exe/igspw_mt -mode=profile -no=1 -restartcount=0 pf=/usr
id3adm 2402 2391 ID3 gwrd -dp pf=/usr/sap/ID3/SYS/profile/ID3_DVEBMGS02_inbbssun02
id3adm 2403 2391 ID3 icman -attach pf=/usr/sap/ID3/SYS/profile/ID3_DVEBMGS02_inbbssun02
orars7 2869 1 RS7 ora_qmnc_RS7
id3adm 2405 2391 ID3 dw.sapID3_DVEBMGS02 pf=/usr/sap/ID3/SYS/profile/ID3_DVEBMGS02_inbbssun02
orars7 2859 1 RS7 ora_cjq0_RS7
orars7 2861 1 RS7 ora_mmon_RS7
orars7 2827 1 RS7 /oracle/RS7/102_64/bin/tnslsnr LISTENER -inherit
oraid3 2411 1 ID3 oracleID3 (LOCAL=NO)
rs7adm 3187 3185 RS7 /usr/sap/RS7/DVEBMGS00/exe/igspw_mt -mode=profile -no=0 -restartcount=0 pf=/usr
orars7 2851 1 RS7 ora_lgwr_RS7
orars7 2847 1 RS7 ora_dbw2_RS7
rs7adm 3182 3144 RS7 dw.sapRS7_DVEBMGS00 pf=/usr/sap/RS7/SYS/profile/RS7_DVEBMGS00_inbbssun02
rs7adm 3186 3185 RS7 /usr/sap/RS7/DVEBMGS00/exe/igsmux_mt -mode=profile -restartcount=0 pf=/usr/sap/
orars7 2841 1 RS7 ora_mman_RS7
root 3511 3450 user.root ps -eo user,pid,ppid,project,args
orars7 2863 1 RS7 ora_mmnl_RS7
rs7adm 3188 3185 RS7 /usr/sap/RS7/DVEBMGS00/exe/igspw_mt -mode=profile -no=1 -restartcount=0 pf=/usr
orars7 2845 1 RS7 ora_dbw1_RS7
rs7adm 3181 3144 RS7 ms.sapRS7_DVEBMGS00 pf=/usr/sap/RS7/SYS/profile/RS7_DVEBMGS00_inbbssun02
orars7 2837 1 RS7 ora_pmon_RS7
orars7 3111 1 RS7 ora_q001_RS7
orars7 2855 1 RS7 ora_smon_RS7
orars7 2853 1 RS7 ora_ckpt_RS7
rs7adm 3144 1 RS7 /usr/sap/RS7/DVEBMGS00/exe/sapstart pf=/usr/sap/RS7/SYS/profile/START_DVEBMGS00
rs7adm 3106 3089 RS7 ms.sapRS7_SCS01 pf=/usr/sap/RS7/SYS/profile/RS7_SCS01_inbbssun02
orars7 2843 1 RS7 ora_dbw0_RS7
rs7adm 3183 3144 RS7 co.sapRS7_DVEBMGS00 pf=/usr/sap/RS7/SYS/profile/RS7_DVEBMGS00_inbbssun02 -F
orars7 2839 1 RS7 ora_psp0_RS7
orars7 2857 1 RS7 ora_reco_RS7
rs7adm 3185 3144 RS7 ig.sapRS7_DVEBMGS00 -mode=profile pf=/usr/sap/RS7/SYS/profile/RS7_DVEBMGS00_inb
rs7adm 3107 3089 RS7 en.sapRS7_SCS01 pf=/usr/sap/RS7/SYS/profile/RS7_SCS01_inbbssun02
rs7adm 3192 3182 RS7 icman -attach pf=/usr/sap/RS7/SYS/profile/RS7_DVEBMGS00_inbbssun02
orars7 2849 1 RS7 ora_dbw3_RS7
rs7adm 3184 3144 RS7 se.sapRS7_DVEBMGS00 pf=/usr/sap/RS7/SYS/profile/RS7_DVEBMGS00_inbbssun02 -F
rs7adm 3191 3182 RS7 gwrd -dp pf=/usr/sap/RS7/SYS/profile/RS7_DVEBMGS00_inbbssun02
rs7adm 3193 3182 RS7 jcontrol pf=/usr/sap/RS7/SYS/profile/RS7_DVEBMGS00_inbbssun02 -DSAPSTART=1 -DCO
rs7adm 3194 3182 RS7 dw.sapRS7_DVEBMGS00 pf=/usr/sap/RS7/SYS/profile/RS7_DVEBMGS00_inbbssun02
rs7adm 3195 3182 RS7 dw.sapRS7_DVEBMGS00 pf=/usr/sap/RS7/SYS/profile/RS7_DVEBMGS00_inbbssun02
rs7adm 3201 3182 RS7 dw.sapRS7_DVEBMGS00 pf=/usr/sap/RS7/SYS/profile/RS7_DVEBMGS00_inbbssun02
rs7adm 3197 3182 RS7 dw.sapRS7_DVEBMGS00 pf=/usr/sap/RS7/SYS/profile/RS7_DVEBMGS00_inbbssun02
orars7 3198 1 RS7 oracleRS7 (LOCAL=NO)
orars7 3200 1 RS7 oracleRS7 (LOCAL=NO)
rs7adm 3264 3193 RS7 /usr/sap/RS7/DVEBMGS00/exe/jlaunch pf=/usr/sap/RS7/SYS/profile/RS7_DVEBMGS00_in
orars7 3203 1 RS7 oracleRS7 (LOCAL=NO)
rs7adm 3208 3182 RS7 dw.sapRS7_DVEBMGS00 pf=/usr/sap/RS7/SYS/profile/RS7_DVEBMGS00_inbbssun02
rs7adm 3211 3182 RS7 dw.sapRS7_DVEBMGS00 pf=/usr/sap/RS7/SYS/profile/RS7_DVEBMGS00_inbbssun02
orars7 3210 1 RS7 oracleRS7 (LOCAL=NO)
rs7adm 3214 3182 RS7 dw.sapRS7_DVEBMGS00 pf=/usr/sap/RS7/SYS/profile/RS7_DVEBMGS00_inbbssun02
orars7 3213 1 RS7 oracleRS7 (LOCAL=NO)
rs7adm 3217 3182 RS7 dw.sapRS7_DVEBMGS00 pf=/usr/sap/RS7/SYS/profile/RS7_DVEBMGS00_inbbssun02
orars7 3216 1 RS7 oracleRS7 (LOCAL=NO)
rs7adm 3220 3182 RS7 dw.sapRS7_DVEBMGS00 pf=/usr/sap/RS7/SYS/profile/RS7_DVEBMGS00_inbbssun02
orars7 3219 1 RS7 oracleRS7 (LOCAL=NO)
rs7adm 3223 3182 RS7 dw.sapRS7_DVEBMGS00 pf=/usr/sap/RS7/SYS/profile/RS7_DVEBMGS00_inbbssun02
orars7 3222 1 RS7 oracleRS7 (LOCAL=NO)
rs7adm 3226 3182 RS7 dw.sapRS7_DVEBMGS00 pf=/usr/sap/RS7/SYS/profile/RS7_DVEBMGS00_inbbssun02
orars7 3225 1 RS7 oracleRS7 (LOCAL=NO)
rs7adm 3229 3182 RS7 dw.sapRS7_DVEBMGS00 pf=/usr/sap/RS7/SYS/profile/RS7_DVEBMGS00_inbbssun02
orars7 3228 1 RS7 oracleRS7 (LOCAL=NO)
rs7adm 3232 3182 RS7 dw.sapRS7_DVEBMGS00 pf=/usr/sap/RS7/SYS/profile/RS7_DVEBMGS00_inbbssun02
orars7 3231 1 RS7 oracleRS7 (LOCAL=NO)
rs7adm 3235 3182 RS7 dw.sapRS7_DVEBMGS00 pf=/usr/sap/RS7/SYS/profile/RS7_DVEBMGS00_inbbssun02
orars7 3234 1 RS7 oracleRS7 (LOCAL=NO)
rs7adm 3240 3182 RS7 dw.sapRS7_DVEBMGS00 pf=/usr/sap/RS7/SYS/profile/RS7_DVEBMGS00_inbbssun02
rs7adm 3265 3193 RS7 /usr/sap/RS7/DVEBMGS00/exe/jlaunch pf=/usr/sap/RS7/SYS/profile/RS7_DVEBMGS00_in
orars7 3239 1 RS7 oracleRS7 (LOCAL=NO)
rs7adm 3243 3182 RS7 dw.sapRS7_DVEBMGS00 pf=/usr/sap/RS7/SYS/profile/RS7_DVEBMGS00_inbbssun02
orars7 3242 1 RS7 oracleRS7 (LOCAL=NO)
rs7adm 3246 3182 RS7 dw.sapRS7_DVEBMGS00 pf=/usr/sap/RS7/SYS/profile/RS7_DVEBMGS00_inbbssun02
orars7 3245 1 RS7 oracleRS7 (LOCAL=NO)
rs7adm 3266 3193 RS7 /usr/sap/RS7/DVEBMGS00/exe/jlaunch pf=/usr/sap/RS7/SYS/profile/RS7_DVEBMGS00_in
orars7 3248 1 RS7 oracleRS7 (LOCAL=NO)
orars7 3250 1 RS7 oracleRS7 (LOCAL=NO)
root 3450 1767 user.root ksh
orars7 3340 1 RS7 oracleRS7 (LOCAL=NO)
orars7 3336 1 RS7 oracleRS7 (LOCAL=NO)
orars7 3338 1 RS7 oracleRS7 (LOCAL=NO)
Similar Messages
-
SAP 4.7 Installation problem on Solaris 10 - Oracle 9.2.0.7
Hi,
I am trying to install SAP 4.7 on Solaris 10 - Oracle 9.2.0.7. I am using standar installation DVD for SAP 4.7 SR1. After installation I want to login SAP system I have an error about database inconsistency. System said that enter SICK transaction. I entered SICK and my error is "OS release SunOS 5.10 Generic_141444-09 sun4u is not support with this kernel". After I received this error I installed new kernel (221) and I upgaded kernel to 221. But after that I could not open SAP system. I checked dev_w1 and it is like below:
"dev_w1" 456 lines, 18662 characters
trc file: "dev_w1", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
M sysno 00
M sid KZP
M systemid 370 (Solaris on SPARCV9 CPU)
M relno 6400
M patchlevel 0
M patchno 221
M intno 20020600
M make: single threaded, Unicode, 64 bit
M pid 22022
M
M
M Fri Jan 29 15:11:00 2010
M ***LOG Q01=> tskh_init, WPStart (Workproc 1 1 22022) [thxxhead.c 1144]
M calling db_connect ...
C Got ORACLE_HOME=/oracle/KZP/920_64 from environment
C got NLS_LANG='AMERICAN_AMERICA.UTF8' from environment
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPKZP's password
C Connecting as /@KZP on connection 0 (nls_hdl 0) ... (dbsl 640 070208)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0x10667d250 0x10668fcd0 0x10668f668
C Attaching to DB Server KZP (con_hdl=0,svchp=0x10668f598,srvhp=0x106691dc8)
C Starting user session (con_hdl=0,svchp=0x10668f598,srvhp=0x106691dc8,usrhp=0x10669a800)
C Now '/@KZP' is connected: con_hdl=0, nls_hdl=0, session_id=13.
C Got SAPKZP's password from OPS$-user
C Disconnecting from connection 0 ...
C Close user session (con_hdl=0,svchp=0x10668f598,usrhp=0x10669a800)
C Now I'm disconnected from ORACLE
C Connecting as SAPKZP/<pwd>@KZP on connection 0 (nls_hdl 0) ... (dbsl 640 070208)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0x10667d250 0x10668fcd0 0x10668f668
C Starting user session (con_hdl=0,svchp=0x10668f598,srvhp=0x106691dc8,usrhp=0x10669a800)
C Now 'SAPKZP/<pwd>@KZP' is connected: con_hdl=0, nls_hdl=0, session_id=13.
C Database NLS settings: AMERICAN_AMERICA.UTF8
C DB instance KZP is running on sapkzpn2 with ORACLE version 9.2.0.7.0 since JAN 29, 2010, 15:10:46
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20100129 151100 sapkzpn2
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip
,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Fri Jan 29 15:11:07 2010
I MtxInit: 1 0 0
M SHM_PRES_BUF (addr: 0xffffffff7597a000, size: 4400000)
M SHM_ROLL_AREA (addr: 0xfffffffe56000000, size: 134217728)
M SHM_PAGING_AREA (addr: 0xffffffff62000000, size: 67108864)
M SHM_ROLL_ADM (addr: 0xffffffff75db0000, size: 2672386)
M SHM_PAGING_ADM (addr: 0xffffffff71f00000, size: 656416)
M ThCreateNoBuffer allocated 572152 bytes for 1000 entries at 0xfffffffe4e004000
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12176 bytes (50 server) at 0xffffffff7bc00000
X EmInit: MmSetImplementation( 2 ).
X <ES> client 1 initializing ....
X Using implementation std
X ES initialized.
B db_con_shm_ini: WP_ID = 1, WP_CNT = 8, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 0xffffffff60000100, size: 30000000, end: 0xffffffff61c9c480)
B dbtbxbuf: Buffer TABLP (addr: 0xffffffff6d400100, size: 10240000, end: 0xffffffff6ddc4100)
B dbexpbuf: Buffer EIBUF (addr: 0xfffffffe5f800108, size: 4194304, end: 0xfffffffe5fc00108)
B dbexpbuf: Buffer ESM (addr: 0xfffffffe5f000108, size: 4194304, end: 0xfffffffe5f400108)
B dbexpbuf: Buffer CUA (addr: 0xfffffffe5101e108, size: 3072000, end: 0xfffffffe5130c108)
B dbexpbuf: Buffer OTR (addr: 0xfffffffe5e800108, size: 4194304, end: 0xfffffffe5ec00108)
M rdisp/reinitialize_code_page -> 0
M icm/accept_remote_trace_level -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S
S Fri Jan 29 15:11:08 2010
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 0x106aa11e0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0xfffffffe51310070
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0xfffffffe513103c8
S using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2272 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A Fri Jan 29 15:11:09 2010
A
A -PXA--
A PXA INITIALIZATION
A System page size: 8kb, total admin_size: 5512kb, dir_size: 5480kb.
I *** ERROR => shmget(10006,153600000,2016) (22: Invalid argument) [shmux.c 1525]
A RABAX in run level 1
A RABAX in unkown environment: task_type=0, run level=1, rabax state=80000000 ztta_task_type=0
[0] DoStack2 ( 0x105af7010, 0xffffffff7fffd740, 0x1004a4ae4, 0x0, 0x105dbb180, 0x102e2f6e0 ), at 0x1004a4ae4
[1] CTrcStack2 ( 0x1036f6d60, 0x0, 0x17400, 0x102e947dc, 0x0, 0x102e2f6e0 ), at 0x1004a4680
[2] __1cXrabax_CStackToTraceFile6F_v_ ( 0x0, 0x1, 0x0, 0x3097000, 0x100000000, 0x103097058 ), at 0x100ae0e80
[3] __1cKrabax_init6FpkH_v_ ( 0x102002ad8, 0x0, 0x1, 0x0, 0x0, 0x0 ), at 0x100ad97d8
[4] ab_rabax ( 0x0, 0x80000000, 0x6da, 0x103879400, 0x1880, 0x1065e4110 ), at 0x100acfe3c
[5] __1cJab_pbinit6F_v_ ( 0x100000000, 0x102e947dc, 0x1, 0x102002ab4, 0x102f4e1c0, 0x103815550 ), at 0x100750de0
[6] ab_init ( 0x0, 0x5bd5000, 0xac8800, 0x5bd5000, 0x1, 0x0 ), at 0x100ac8d34
[7] ThrInitRunTime ( 0x100489c00, 0x489c00, 0x332c400, 0x102e94820, 0x1, 0x102e947d4 ), at 0x100476e84
[8] ThStartUp2 ( 0x101fec800, 0x194c800, 0x100000000, 0x102e947d4, 0x0, 0x10194cc00 ), at 0x100415860
[9] tskh_init ( 0x2e7a000, 0x1, 0x1, 0x540, 0x102e94400, 0x15 ), at 0x100260f14
[10] tskhstart ( 0x0, 0x2e94400, 0x0, 0x1003d6400, 0x3d6400, 0x100000000 ), at 0x10025cf9c
[11] DpMain ( 0x3641400, 0x2e7a000, 0x100000000, 0x1, 0x0, 0x0 ), at 0x1001856c0
A
A Fri Jan 29 15:11:10 2010
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX failed.
A *** suicide ON
A ** RABAX: level LEV_RX_VMIT_CLEANUP entered.
A ** RABAX: level LEV_RX_VMIT_CLEANUP completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD failed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
X *** ERROR => invalid MM administration (adm) (nil) (admCheck)(nil) [mmxx.c 2127]
A ** RABAX: level LEV_RX_WRITE_SNAP failed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Fri Jan 29 15:11:10 2010
A
A Error Code PXA_NO_SHARED_MEMORY.
A Module $Id: //bas/640_REL/src/krn/runt/abload3.c#44 $ SAP.
A Function ab_pbinit Line 1754.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS failed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end RX_SUICIDE
A Shared Memory von 150000 Kilo-Bytes f\303\274r PXA nicht verf\303\274gbar..
A
A *
A * Non recoverable error. Aborting process...
A *
M ***LOG R63=> ThWpHalt, halt wp () [thxxhead.c 15213]
M in_ThErrHandle: 1
M *** ERROR => ThWpHalt: halt wp (step 1, th_errno 5, action 2, level 1) [thxxhead.c 9696]
M
M Info for wp 1
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = 1
M mode = 0
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M
M PfStatDisconnect: disconnect statistics
M ThIErrHandle: action changed to 2
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 255]
M Entering ThSetStatError
M ThErrPrivHandle: set th_errno (5)
M Entering ThReadDetachMode
M *** ERROR => ThIErrHandle: bad value for th_act_em_hdl (5), detach T1/M0 [thxxhead.c 10129]
M
M Modeinfo for User T1/M0
M
M
M call ThrShutDown (1)...
A Saving PXA statistics.
M -
C-STACK -
[0] __1cNab_pxasavedir6F_i_ ( 0x102e94400, 0x2f63c00, 0x102e94800, 0x10200b800, 0x1, 0x0 ), at 0x10076c108
[1] ab_shutdown ( 0x0, 0x1, 0x102f3b400, 0x1, 0x102e94400, 0x2e94400 ), at 0x100aca150
[2] ThIErrHandle ( 0x10251b400, 0x2e94800, 0x102e7a324, 0x2, 0x2e94400, 0x102e94800 ), at 0x100293870
M -
M ***LOG Q0E=> SigIGenAction, signal ( 11) [sigux.c 902]
M in_ThErrHandle: 2
M ***LOG R0H=> ThIErrHandle, Loop in ThErrHandle, restart wp () [thxxhead.c 9717]
M -
C-STACK -
[0] DoStack2 ( 0x105af7010, 0xffffffff7fffc340, 0x1004a4ae4, 0x0, 0x105dbac40, 0x102e2f6e0 ), at 0x1004a4ae4
[1] CTrcStack2 ( 0x1036f6d00, 0x0, 0x17400, 0x102e947dc, 0x10049d16c, 0x102e2f6e0 ), at 0x1004a4680
[2] ThIErrHandle ( 0x0, 0x100000000, 0x3, 0x10331ff08, 0xb, 0x4 ), at 0x100291b08
[3] SigIGenAction ( 0x102c9f800, 0x1032acd04, 0x102c9f800, 0xb, 0x102e94820, 0x102e947d4 ), at 0x101e49c4c
[4] __sighndlr ( 0xb, 0xffffffff7fffcf80, 0xffffffff7fffcca0, 0x101e493bc, 0x0, 0x0 ), at 0xffffffff7c7d62e0
[5] call_user_handler ( 0xffffffff7d300200, 0xffffffff7d300200, 0xffffffff7fffcca0, 0x19, 0x0, 0x0 ), at 0xffffffff7c7c9e44
[6] sigacthandler ( 0x0, 0xffffffff7fffcf80, 0xffffffff7fffcca0, 0xffffffff7d300200, 0x0, 0xffffffff7c93c000 ), at 0xffffffff7c7ca03
c
[7] __1cNab_pxasavedir6F_i_ ( 0x102e94400, 0x2f63c00, 0x102e94800, 0x10200b800, 0x1, 0x0 ), at 0x10076c0f4
[8] ab_shutdown ( 0x0, 0x1, 0x102f3b400, 0x1, 0x102e94400, 0x2e94400 ), at 0x100aca150
[9] ThIErrHandle ( 0x10251b400, 0x2e94800, 0x102e7a324, 0x2, 0x2e94400, 0x102e94800 ), at 0x100293870
[10] __1cIrabax_do6FpkHpHi_v_ ( 0x102002ad8, 0x0, 0x41, 0x102e94800, 0x1, 0x1 ), at 0x100adc154
[11] ab_rabax ( 0x2, 0x2e94800, 0x1, 0x100000000, 0x2e94400, 0x2e94400 ), at 0x100ad3bc4
M -
M Fri Jan 29 15:11:11 2010
M ThSigHandler: signal (step 1, th_errno 11, action 4)
M
M Info for wp 1
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = 1
M mode = 0
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M PfStatDisconnect: disconnect statistics
M Entering ThSetStatError
M ***LOG Q02=> wp_halt, WPStop (Workproc 1 22022) [dpuxtool.c 318]
Also I tried to change SAPEXE.SAR and SAPEXEDB.SAR files from SAP Kernel CD. After that I started installation again. But I have same error. SAP system didn't work.
How can I solve this error?Cannot I install SAP 4.7 SR1 on Solaris 10 - ORacle 9.2.0.7?Is the problem about SAP profile parameters or Solaris Kernel parameters
Best regards,Also dev_disp is like below:
sid KZP
systemid 370 (Solaris on SPARCV9 CPU)
relno 6400
patchlevel 0
patchno 221
intno 20020600
make: single threaded, Unicode, 64 bit
pid 22016
***LOG Q00=> DpSapEnvInit, DPStart (00 22016) [dpxxdisp.c 1104]
shared lib "dw_xml.so" version 221 successfully loaded
shared lib "dw_xtc.so" version 221 successfully loaded
shared lib "dw_stl.so" version 221 successfully loaded
shared lib "dw_gui.so" version 221 successfully loaded
shared lib "dw_mdm.so" version 221 successfully loaded
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpIPCInit2: start server >sapkzpn2_KZP_00 <
DpShMCreate: sizeof(wp_adm) 10752 (1344)
DpShMCreate: sizeof(tm_adm) 3728952 (18552)
DpShMCreate: sizeof(wp_ca_adm) 31200 (104)
DpShMCreate: sizeof(appc_ca_adm) 10400 (104)
DpShMCreate: sizeof(comm_adm) 316000 (632)
DpShMCreate: sizeof(vmc_adm) 0 (560)
DpShMCreate: sizeof(wall_adm) (40056/36728/88/192)
DpShMCreate: SHM_DP_ADM_KEY (addr: 0xffffffff70c00000, size: 4181592)
DpShMCreate: allocated sys_adm at 0xffffffff70c00000
DpShMCreate: allocated wp_adm at 0xffffffff70c01c88
DpShMCreate: allocated tm_adm_list at 0xffffffff70c04688
DpShMCreate: allocated tm_adm at 0xffffffff70c046b0
DpShMCreate: allocated wp_ca_adm at 0xffffffff70f92ce8
DpShMCreate: allocated appc_ca_adm at 0xffffffff70f9a6c8
DpShMCreate: allocated comm_adm_list at 0xffffffff70f9cf68
DpShMCreate: allocated comm_adm at 0xffffffff70f9cf80
DpShMCreate: allocated vmc_adm_list at 0xffffffff70fea1e0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0xffffffff70fea208
DpShMCreate: allocated wall_adm at 0xffffffff70fea210
MBUF state OFF
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation std
EsIUnamFileMapInit: ES base = 0x0xfffffffe60000000
EsStdInit: Extended Memory 4092 MB allocated
<ES> 1022 blocks reserved for free list.
ES initialized.
Fri Jan 29 15:11:07 2010
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 2.6.1 2.6 4.0) [dpxxdisp.c 1490]
***LOG Q0K=> DpMsAttach, mscon ( sapkzpn2) [dpxxdisp.c 10127]
DpStartStopMsg: send start message (myname is >sapkzpn2_KZP_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Fri Jan 29 15:11:08 2010
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 221
Release check o.K.
Fri Jan 29 15:11:29 2010
ERROR => W0 (pid 22021) died [dpxxdisp.c 12698]
ERROR => W2 (pid 22023) died [dpxxdisp.c 12698]
my types changed after wp death/restart 0xbf --> 0xbd
ERROR => W3 (pid 22024) died [dpxxdisp.c 12698]
my types changed after wp death/restart 0xbd --> 0xb9
ERROR => W4 (pid 22025) died [dpxxdisp.c 12698]
ERROR => W5 (pid 22028) died [dpxxdisp.c 12698]
my types changed after wp death/restart 0xb9 --> 0xb1
ERROR => W6 (pid 22030) died [dpxxdisp.c 12698]
my types changed after wp death/restart 0xb1 --> 0xa1
ERROR => W7 (pid 22038) died [dpxxdisp.c 12698]
my types changed after wp death/restart 0xa1 --> 0x81
Fri Jan 29 15:12:08 2010
ERROR => W1 (pid 22022) died [dpxxdisp.c 12698]
my types changed after wp death/restart 0x81 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-22021 (SIGUSR2)
ERROR => DpWpKill(22021, SIGUSR2) failed [dpxxtool.c 2508]
killing W1-22022 (SIGUSR2)
ERROR => DpWpKill(22022, SIGUSR2) failed [dpxxtool.c 2508]
killing W2-22023 (SIGUSR2)
ERROR => DpWpKill(22023, SIGUSR2) failed [dpxxtool.c 2508]
killing W3-22024 (SIGUSR2)
killing W7-22038 (SIGUSR2)
ERROR => DpWpKill(22038, SIGUSR2) failed [dpxxtool.c 2508]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=15
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Jan 29 15:12:18 2010
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Fri Jan 29 09:12:18 2010
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 22021 Ended no 1 0 78 SAPSYS
1 DIA 22022 Ended no 1 0 78 SAPSYS
2 UPD 22023 Ended no 1 0 78 SAPSYS
3 ENQ 22024 Ended no 1 0 78 SAPSYS
4 BTC 22025 Ended no 1 0 78 SAPSYS
5 BTC 22028 Ended no 1 0 78 SAPSYS
6 SPO 22030 Ended no 1 0 71 SAPSYS
7 UP2 22038 Ended no 1 0 71 SAPSYS
Dispatcher Queue Statistics Fri Jan 29 09:12:18 2010
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 6 ( 66%), shm 3 ( 33%)
since last update total 9, udp 6 ( 66%), shm 3 ( 33%)
Dump of tm_adm structure: Fri Jan 29 09:12:18 2010
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Fri Jan 29 09:12:18 2010
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=15
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Jan 29 15:12:23 2010
NiISelect: TIMEOUT occured (5000 ms)
DpHalt: shutdown server >sapkzpn2_KZP_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmKeySharedMMU( 57 ) = 0 (octal)
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmKeySharedMMU( 57 ) = 0 (octal)
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing proc (22019) (SOFT_KILL)
Stop icman
killing proc (22020) (SOFT_KILL)
Terminate gui connections
kill(22019,0) successful -> process alive
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=15
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Jan 29 15:12:24 2010
NiISelect: TIMEOUT occured (1000 ms)
kill(22019,0) -> ESRCH: process died
kill(22020,0) -> ESRCH: process died
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
DpStartStopMsg: send stop message (myname is >sapkzpn2_KZP_00 <)
NiIMyHostName: hostname = 'sapkzpn2'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
cleanup event management
cleanup shared memory/semaphores
ShmCleanup SHM_SYS_ADM_KEY
ShmCleanup( 1 )
ShmCreate( 1, 0, 2, 0x0xffffffff7fffeab8 )
ShmProtect( 1, 3 )
ShmKeySharedMMU( 1 ) = 0 (octal)
ShmCreate( 1, 0, 2, -> 0x0xffffffff7b100000 )
ShmCleanup SHM_DP_ADM_KEY
ShmCleanup( 2 )
ShmCreate( 2, 0, 2, 0x0xffffffff7fffeab8 )
ShmProtect( 2, 3 )
ShmKeySharedMMU( 2 ) = 0 (octal)
ShmCreate( 2, 0, 2, -> 0x0xffffffff70c00000 )
ShmCleanup SHM_DP_CA_KEY
ShmCleanup( 3 )
ShmCreate( 3, 0, 2, 0x0xffffffff7fffeab8 )
ShmProtect( 3, 3 )
ShmKeySharedMMU( 3 ) = 0 (octal)
ShmCreate( 3, 0, 2, -> 0x0xffffffff6fc00000 )
ShmCleanup SHM_PF_KEY
ShmCleanup( 4 )
ShmCreate( 4, 0, 2, 0x0xffffffff7fffeab8 )
ShmKeyPermission( 4 ) = 0740 (octal)
ShmKeySharedMMU( 4 ) = 0 (octal)
ShmProtect( 4, 3 )
ShmKeySharedMMU( 4 ) = 0 (octal)
ShmCreate( 4, 0, 2, -> 0x0xffffffff71f00000 )
ShmCleanup SHM_PRES_BUF
ShmCleanup( 14 )
ShmCreate( 14, 0, 2, 0x0xffffffff7fffeab8 )
ShmGet( 10, 14, 0, 2, 0x0xffffffff7fffe970 )
ShmGet( 10, 14, 0, 2, -> 0x0xffffffff7597a000 )
ShmProtect( 14, 3 )
ShmProtect: Key=14 not attached
ShmProtect( 14, 3 )
ShmCreate( 14, 0, 2, -> 0x0xffffffff7597a000 )
ShmCleanup SHM_CALI_BUFFER
ShmCleanup( 11 )
ShmCreate( 11, 0, 2, 0x0xffffffff7fffeab8 )
ShmGet( 10, 11, 0, 2, 0x0xffffffff7fffe970 )
ShmGet( 10, 11, 0, 2, -> 0x0xffffffff76040000 )
ShmProtect( 11, 3 )
ShmProtect: Key=11 not attached
ShmProtect( 11, 3 )
ShmCreate( 11, 0, 2, -> 0x0xffffffff76040000 )
ShmCleanup SHM_DB_TBUFF
ShmCleanup( 19 )
ShmCreate( 19, 0, 2, 0x0xffffffff7fffeab8 )
ShmKeyPermission( 19 ) = 0740 (octal)
ShmKeySharedMMU( 19 ) = 0 (octal)
ShmProtect( 19, 3 )
ShmKeySharedMMU( 19 ) = 0 (octal)
ShmCreate( 19, 0, 2, -> 0x0xffffffff66000000 )
ShmCleanup SHM_DB_TBUFF_P
ShmCleanup( 33 )
ShmCreate( 33, 0, 2, 0x0xffffffff7fffeab8 )
ShmKeyPermission( 33 ) = 0740 (octal)
ShmKeySharedMMU( 33 ) = 0 (octal)
ShmProtect( 33, 3 )
ShmKeySharedMMU( 33 ) = 0 (octal)
ShmCreate( 33, 0, 2, -> 0x0xffffffff70400000 )
ShmCleanup SHM_DB_STBUFF
ShmCleanup( 41 )
ShmCreate( 41, 0, 2, 0x0xffffffff7fffeab8 )
ShmKeyPermission( 41 ) = 0740 (octal)
ShmKeySharedMMU( 41 ) = 0 (octal)
ShmProtect( 41, 3 )
ShmKeySharedMMU( 41 ) = 0 (octal)
ShmCreate( 41, 0, 2, -> 0x0xffffffff66800000 )
ShmCleanup SHM_DB_TTBUFF
ShmCleanup( 42 )
ShmCreate( 42, 0, 2, 0x0xffffffff7fffeab8 )
ShmGet( 40, 42, 0, 2, 0x0xffffffff7fffe970 )
ShmCreate( 40, 0, 2, 0x0xffffffff7fffe798 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmKeySharedMMU( 40 ) = 0 (octal)
ShmProtect( 40, 3 )
ShmCreate( 40, 0, 2, -> 0x0xffffffff60000000 )
ShmGet( 40, 42, 0, 2, -> 0x0xffffffff62972000 )
ShmProtect( 42, 3 )
ShmProtect: Key=42 not attached
ShmProtect( 42, 3 )
ShmCreate( 42, 0, 2, -> 0x0xffffffff62972000 )
ShmDelete( 40 )
ShmCleanup SHM_DB_FTBUFF
ShmCleanup( 43 )
ShmCreate( 43, 0, 2, 0x0xffffffff7fffeab8 )
ShmGet( 40, 43, 0, 2, 0x0xffffffff7fffe970 )
ShmCreate( 40, 0, 2, 0x0xffffffff7fffe798 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_SNTBUFF
ShmCleanup( 45 )
ShmCreate( 45, 0, 2, 0x0xffffffff7fffeab8 )
ShmGet( 40, 45, 0, 2, 0x0xffffffff7fffe970 )
ShmCreate( 40, 0, 2, 0x0xffffffff7fffe798 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_IRBUFF
ShmCleanup( 44 )
ShmCreate( 44, 0, 2, 0x0xffffffff7fffeab8 )
ShmGet( 40, 44, 0, 2, 0x0xffffffff7fffe970 )
ShmCreate( 40, 0, 2, 0x0xffffffff7fffe798 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_OBJ_BUFFER
ShmKeySharedMMU( 31 ) = 0 (octal)
ShmCreate( 31, 0, 2, -> 0x0xffffffff6f400000 )
closing connect handles (dgm + tcp)
DpDelSocketInfo: del info for socket 1 (type=2)
NiICloseHandle: shutdown and close hdl 1 / socket 8
DpDelSocketInfo: del info for socket 2 (type=1)
NiBufClose: clear extensions for hdl 2
NiBufSetStat: bufstat of hdl 2 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 2 / socket 9
***LOG Q05=> DpHalt, DPStop ( 22016) [dpxxdisp.c 9033]
shutdown completed - server stopped ***
Good Bye .....
Could you please help me about this issue?
Best regards -
Logical interface in solaris 10
Hi there,
I need to configure logical interface in a solaris 10 3/05 server. After reading the Solaris 10 IP services manual, I am not quite sure what to do. All the examples and explanation are about using the new subcommand addif of ifconfig. It was not clear in the documentation if the setting logical interfaces via addif will persist across boot.
Can one still configure logical interface in Solaris 10 in a more traditional way like in Solaris 8? In an Solaris 8 server I will do the following.
Let's assume I want to configure in a solaris 8 server a logical interface named hme0:1 with IP address 192.168.20.28 with netmask 255.255.255.0 for hostname host001
# cat /etc/hostname.hme0:1
host001
^D
# echo "192.168.20.28 host001" >> /etc/inet/hosts
# echo "192.168.20.0 255.255.255.0" >> /etc/inet/netmasks
# reboot -- -r
Can one still do that in solaris 10 3/05 server?Hi there,
I need to configure logical interface in a solaris 10
3/05 server. After reading the Solaris 10 IP services
manual, I am not quite sure what to do. All the
examples and explanation are about using the new
subcommand addif of ifconfig. It was not clear in the
documentation if the setting logical interfaces via
addif will persist across boot.No. No 'ifconfig' command is persistent.
Can one still configure logical interface in Solaris
10 in a more traditional way like in Solaris 8? In an
Solaris 8 server I will do the following.
Let's assume I want to configure in a solaris 8
server a logical interface named hme0:1 with IP
address 192.168.20.28 with netmask 255.255.255.0 for
hostname host001
# cat /etc/hostname.hme0:1
host001
^D
# echo "192.168.20.28 host001" >> /etc/inet/hosts
# echo "192.168.20.0 255.255.255.0" >>
/etc/inet/netmasks
# reboot -- -r
Can one still do that in solaris 10 3/05 server?Absolutely.
You don't need to reboot (you can run ifconfig for this boot and let the files do the work next time) and the -r doesn't do anything with interfaces (expecially virtual interfaces) anyway.
Darren -
Installation problem on Solaris
I am trying to install sun one 7.0 on Solaris 8. The install is failing with this error:
ERROR - library load failed with following error: Can't load library: /opt/SUNWappserver7/lib/libinstallCore.so
INFO - End core server uninstallation
anyone know what causes this??
cheersLooks like Solaris package installation failed and installer reverted to uninstallation sequence. For low level pkgadd log please check /var/sadm/install/logs/Sun_ONE_Application_Server_install.B<timestamp> file (timestamp is date and time of your installation attempt in mmddHHMM format).
Look for any errors in this file. Most likely thing that could have happened is that the installation of Java Help (SUNWjhrt) package failed because you didn't have existing package based J2SE installation on the system. If that's the case, workaround is to either preinstall package based J2SE installation or to selected option to install bundled J2SE that comes with application server. -
Installation problem on Solaris 10
Dear All,
We are trying to install j2sdk 1.4.2_13 on solaris server zone. I have downloaded j2sdk-1_4_2_13-nb-5_0-solsparc-ml.bin
But when I try to execute this:
#./j2sdk-1_4_2_13-nb-5_0-solsparc-ml.bin
It gives me error: The installer is unable to run in graphical mode. Try running the installer with the -console or -silent flag
Tried with -console:
The wizard cannot continue because of the following error: Invalid command line option: console is not supported (10
01) (403)
WARNING: could not delete temporary file /tmp/ismp001/2599368
WARNING: could not delete temporary file /tmp/ismp001/6183226
WARNING: could not delete temporary file /tmp/ismp001/1222839
Then tried with -silent:
This time command just completed w/o any output at all.
Please suggest what can I do?
regards, Sean.Dear Siddhesh,
Thanks for your reply.
I tried using X Manager GUI for my Solaris. But when I double click the j2sdk-1_4_2_13-nb-5_0-solsparc-ml.bin file to run it, it simply denies saying:
The filename "j2sdk-1_4_2_13-nb-5_0-solsparc-ml.bin" indicates that this file is of type "Unknown type". The contents of the file indicate that the file is of type "Shell script". If you open this file, the file might present a security risk to your system.
Do not open the file unless you created the file yourself, or received the file from a trusted source. To open the file, rename the file to the correct extension for "Shell script", then open the file normally. Alternatively, use the Open With menu to choose a specific application for the file.
Also /tmp has full authorizations:
drwxrwxrwt 7 root sys 557 Jun 24 08:34 tmp
I dont have Hummingbird for X11 forwarding with this client. Do I have any other option??
regards, Sean. -
New to Solaris, Some Samba and NTFS issues.
Hi Im new to solaris and trying out ZFS which has been great.
Im haivng some trouble that I cant find up to date info on so here goes:
First how do you mount an NTFS volume in Solaris 11 Express?
I need to access the data on an NTFS drive to populate my new ZFS tank.
Secondly, I have read only access on my samba shares from windows machines but my smb.conf looks right. a copy of my smb.conf will follow
Any suggestions would be appreciated.
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
# For a step to step guide on installing, configuring and using samba,
# read the Samba-HOWTO-Collection. This may be obtained from:
# http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
# Many working examples of smb.conf files can be found in the
# Samba-Guide which is generated daily and can be downloaded from:
# http://www.samba.org/samba/docs/Samba-Guide.pdf
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not made any basic syntactic errors.
#======================= Global Settings =====================================
[global]
# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
workgroup = WORKGROUP
# server string is the equivalent of the NT Description field
server string = Samba Server
# Security mode. Defines in which mode Samba will operate. Possible
# values are share, user, server, domain and ads. Most people will want
# user level security. See the Samba-HOWTO-Collection for details.
security = share
# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
; hosts allow = 192.168.1. 192.168.2. 127.
# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
load printers = yes
# you may wish to override the location of the printcap file
; printcap name = /etc/printcap
# on SystemV system setting printcap name to lpstat should allow
# you to automatically obtain a printer list from the SystemV spool
# system
; printcap name = lpstat
# It should not be necessary to specify the print system type unless
# it is non-standard. Currently supported print systems include:
# bsd, cups, sysv, plp, lprng, aix, hpux, qnx
; printing = cups
# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
; guest account = pcguest
# this tells Samba to use a separate log file for each machine
# that connects
log file = /var/samba/log/log.%m
# Put a capping on the size of the log files (in Kb).
max log size = 50
# Use password server option only with security = server
# The argument list may include:
# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
# or to auto-locate the domain controller/s
# password server = *
; password server = <NT-Server-Name>
# Use the realm option only with security = ads
# Specifies the Active Directory realm the host is part of
; realm = MY_REALM
# Backend to store user information in. New installations should
# use either tdbsam or ldapsam. smbpasswd is available for backwards
# compatibility. tdbsam requires no further configuration.
passdb backend = smbpasswd
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting.
# Note: Consider carefully the location in the configuration file of
# this line. The included file is read at that point.
; include = /usr/sfw/lib/smb.conf.%m
# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
; interfaces = 192.168.12.2/24 192.168.13.2/24
# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
; local master = no
# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
; os level = 33
# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
; domain master = yes
# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
; preferred master = yes
# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
; domain logons = yes
# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
; logon script = %m.bat
# run a specific logon batch file per username
; logon script = %U.bat
# Where to store roving profiles (only for Win95 and WinNT)
# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
; logon path = \\%L\Profiles\%U
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
; wins support = yes
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
; wins proxy = yes
# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The default is NO.
dns proxy = no
# These scripts are used on a domain controller or stand-alone
# machine to add or delete corresponding unix accounts
; add user script = /usr/sbin/useradd %u
; add group script = /usr/sbin/groupadd %g
; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u
; delete user script = /usr/sbin/userdel %u
; delete user from group script = /usr/sbin/deluser %u %g
; delete group script = /usr/sbin/groupdel %g
#============================ Share Definitions ==============================
[homes]
comment = Home Directories
browseable = no
writable = yes
# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
; comment = Network Logon Service
; path = /usr/sfw/lib/netlogon
; guest ok = yes
; writable = no
; share modes = no
# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
; path = /usr/local/samba/profiles
; browseable = no
; guest ok = yes
# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
[printers]
comment = All Printers
path = /var/spool/samba
browseable = no
# Set public = yes to allow user 'guest account' to print
guest ok = no
writable = no
printable = yes
# This one is useful for people to share files
;[tmp]
; comment = Temporary file space
; path = /tmp
; read only = no
; public = yes
# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
; comment = Public Stuff
; path = /home/samba
; public = yes
; writable = no
; printable = no
; write list = @staff
# Other examples.
# A private printer, usable only by fred. Spool data will be placed in fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
; comment = Fred's Printer
; valid users = fred
; path = /homes/fred
; printer = freds_printer
; public = no
; writable = no
; printable = yes
# A private directory, usable only by fred. Note that fred requires write
# access to the directory.
;[fredsdir]
; comment = Fred's Service
; path = /usr/somewhere/private
; valid users = fred
; public = no
; writable = yes
; printable = no
# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %U option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
; comment = PC Directories
; path = /usr/pc/%m
; public = no
; writable = yes
# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
;[public]
; path = /usr/somewhere/else/public
; public = yes
; only guest = yes
; writable = yes
; printable = no
# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
; comment = Mary's and Fred's stuff
; path = /usr/somewhere/shared
; valid users = mary fred
; public = no
; writable = yes
; printable = no
; create mask = 0765
[Series]
comment = TV Series
path = /home/Kirby/Series
public = yes
only guest = yes
writable = yes
printable = no875739 wrote:
Hi Im new to solaris and trying out ZFS which has been great.
Im haivng some trouble that I cant find up to date info on so here goes:
First how do you mount an NTFS volume in Solaris 11 Express?
I need to access the data on an NTFS drive to populate my new ZFS tank.I never had a need for it but I think you'll have to compile fuse ntfs-3g manually.
http://web.archiveorange.com/archive/v/u46DbWSGcIzl7pexf4hQ
>
Secondly, I have read only access on my samba shares from windows machines but my smb.conf looks right. a copy of my smb.conf will follow
Any suggestions would be appreciated.You don't need to use Samba in Solaris 11 Express.
http://download.oracle.com/docs/cd/E19963-01/html/821-1448/gaynd.html#gayne -
Error while creating a Solaris Resource
I got the following error while creating the following solaris resource:
Test connection failed for resource(s):
Solaris: Script failed waiting for "ASSWORD:" in response "_,)#+(:" ==> com.waveset.util.WavesetException: Script processor timed out with nothing to read and the following unprocessed text: "_,)#+(:".\n
I have the sudo permissions for the following commands:
(ALL) NOPASSWD: /usr/bin/auths, /usr/sbin/groupadd, /usr/sbin/groupdel, /usr/sbin/groupmod, /usr/bin/last, /usr/bin/listusers, /usr/bin/logins, /usr/bin/passwd, /usr/bin/profiles, /usr/bin/roles, /usr/sbin/useradd, /usr/sbin/userdel, /usr/sbin/usermod, /usr/bin/ypmatch, /usr/bin/ypcat, /usr/bin/ypasswd, /usr/bin/awk, /usr/bin/cat, /usr/bin/chmod, /usr/bin/chown, /usr/bin/cp, /usr/bin/cut, /usr/bin/diff, /usr/bin/echo, /usr/bin/grep, /usr/bin/ls, /usr/bin/mv, /usr/bin/rm, /usr/bin/sleep, /usr/bin/sort, /usr/bin/tail, /usr/bin/touch, /usr/bin/which
Please let me know what could be the problem?This doesn't look like a Sun Directory Server issue. You may want to post this to another forum.
Regards,
Ludovic. -
Error ora-15081 (and several others) while creating a new db in Solaris
Hi all,
OS: Solaris 11
DB: 11.2.0.3.5 (2 node rac)
While creating a new db on a Solaris 11 env, via dbca, the following stack error appeared to me:
ORA-19624: operation failed, retry possible
ORA-19870: error while restoring backup piece path[...]
ORA-19504: failed to create file "+MYDG"
ORA-00372: file cannot be modified at this time
ORA-15196: invalid ASM block header [kfc.c:19572] [1] [257] [0 != 821602346]
ORA-15081: failed to submit an I/O operation to a disk
ORA-15066: offlining disk "dsk_0001" in group "MYDG" may result in data loss
ORA-06512: at SYS.X$DBMS_BACKUP_RESTORE, line5827The dbca (ran as oracle user) aborts at 15%.
There are a lot of errors in this stack, and i'm not pretty sure which error is the main cause of this issue, but I think it's the "ORA-15081: failed to submit an I/O operation to a disk" that is the bad guy here. I did some researches and found that some possible sollutions:
1) One said that this error might be caused by bad permissions on the raw devices used in the "MYDG" diskgroup (i'm using 6 devices with external redundancy), but my devices are all with the grid:asmadmin and 660 permissions
2) Another said that this might be a problem with the owner:group of the oracle binaries. In ny installation the oracle binaries ($ORACLE_HOME/bin) are with the oracle:oinstall. I thougth of addind the asmadmin group to the oracle user, but i'm not sure what are the implications of this change. What do you thing?
What am I doing wrong and how can i solve it?
Thanks in advance for your pacience and attention.Here follows the output:
NAME MOUNT_S HEADER_STATU MODE_ST STATE GROUP_NUMBER PATH
DG02HML_0000 CACHED MEMBER ONLINE NORMAL 3 /dev/rdsk/c0t60060E8005487F000000487F000 00500d0s0
DG02HML_0001 CACHED MEMBER ONLINE NORMAL 3 /dev/rdsk/c0t60060E8005487F000000487F000 00502d0s0
DG02HML_0002 CACHED MEMBER ONLINE NORMAL 3 /dev/rdsk/c0t60060E8005487F000000487F000 00504d0s0
DG02HML_0003 CACHED MEMBER ONLINE NORMAL 3 /dev/rdsk/c0t60060E8005487F000000487F000 00506d0s0
DG02HML_0004 CACHED MEMBER ONLINE NORMAL 3 /dev/rdsk/c0t60060E8005487F000000487F000 00508d0s0
DG02HML_0005 CACHED MEMBER ONLINE NORMAL 3 /dev/rdsk/c0t60060E8005487F000000487F000 0050Ad0s0 -
How to create HP LaserJet 2420 printer queue on Solaris 10
Hi Solaris Gurus,
I am having difficulty creating a printer queue for HP LaserJet 2420 on Solaris 10 (11/9) Sparc (Sun Fire T5220) server. A popular method used is with hppi (HP Jet Direct) tool but it does not have the exact printer driver and alternative printer drivers (e.g. HP LaserJet 4 / 4M, HP LaserJet 2000 series) resulted in only part of the text occupying the wrong side of an A5 page.
An alternative approach that has worked in the past for simple default paper tray 2 (single paper tray), with tray 1 reserved for manual feed. This method involves creating a working printer queue on a Windows workstation (XP) / server (2000) with the correct driver and having configured to support Unix printing to receive LPR request from Unix systems in general. A remote printer queue would then be defined on Solaris 10 system which points to the Windows system. However, the printing jobs kept going to tray 1 (top manual feed) even though the Windows printer queue was configured to go to tray 3 (bottom tray).
The earlier method would be simplest but needs the right driver (PDD) but I don’t know where to find it. The latter approach is also not working despite having got the right driver on Windows. A test page on the target Windows printer queue would print to tray 3 (bottom tray) of the printer correctly.
Printmgr does not work well with HP printers from experience. It is good for serial and local printers.
Your advice would be much appreciated.
Thanks,
CrystalHi Giogio, and welcome to the HP Forums.
I am sorry to be the bearer of this news, but do the age of the printer, it is not supported by Mac OS X 10.9. I am including a list below of the supported printers from Apple:
OS X: Printer and scanner software available for download.
For more information, I would recommend contacting the Apple Support Communities.
Thank you for posting on the HP Forums.
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green. -
PMTU discovery in IPv6 based on IPV6_RECVPATHMTU in Solaris 10
Our application works with raw sockets and needs to discover PMTU of IPv6 paths.
According to the RFC-3542 (http://tools.ietf.org/html/rfc3542, section 11) the socket option IPV6_RECVPATHMTU allows applications to know about the change of path MTU by receipt of new ancillary data item (IPV6_PATHMTU) which is delivered to recvmsg() without any actual data. Following construction should be used to enable this option:
int on = 1;
setsockopt(fd, IPPROTO_IPV6, IPV6_RECVPATHMTU, &on, sizeof(on));In the online Sun documentation I found that this socket option is supported since Solaris 10 (http://docs.sun.com/app/docs/doc/816-5177/ip6-7p).
However, in our test this socket option appears to be not working. After decrease of the PMTU via ifconfig and sending a big enough packet an ICMP (Packet Too Big) is received but there is no event with ancillary data item on the socket.
One peculiarity that may be essential is that our application binds to a specific port in a raw socket (i.e. to IP address : port pair).
Does anyone have information if the IPV6_RECVPATHMTU socket option is really supported in Solaris 10?
Probably, ICMP should be off to be able to receive this event with ancillary data on the socket?
Will appreciate any ideas how to make it working.
Thanks in advance,
Mike.Hi,
I have a Sunfire V100 - and have the exact same problem. The settings are correct; I have configure dual-NIC cards many times in the past - but this issue is simply eluding me. I can swap in a Linux machine in router / ip forwarding mode and there are no problems, but when I put back in the Sunfire I encounter the same issues you have.
In effect, packets from the LAN arrive at the NIC on the Solaris machine, but then don't get forwarded to the other NIC's gateway. I'm at a loss, but I have seen this problem pop-up (without answer) a half-dozen times in this forum alone, and multiple times on different support sites. Did you (or anyone) ever come across a solution for this? Is this not some easily overlooked yet possibly cryptic flag or variable that I've missed? Anyone? -
Solaris: OC4J: 9.0.2.0.0 or 9.0.3.0.0
I'm a bit puzzled as to versioning of oc4j running applications created with Jdeveloper RC2 / BI Beans RC2 .
I downloaded a file called oc4j_extended.zip (of 25. March).
I would have thought this to be the latest distro of oc4j.
When I invoke the oc4j.jar, I receive a message like this:
"Oracle9iAS (9.0.2.0.0) Containers for J2EE initialized"
I see other people are running version 9.0.3.0.0, and most Jdeveloper references are for this version as well.
Is there a later version (for Solaris) that I need to download/install?
If so, where can it be found?
Or am I fine running with the one I have?
(Reason for asking is that I am running into problems that could possibly be related to versioning.)
JensThanks for quick response, I am located in Norway, 6 hours in front of the US, so days can easily be "wasted" waiting for you guys. Maybe we'll manage to squeeze in 2 answers today ;-)
Here are the answers to your question:
myhost% java -version -jar oc4j.jar
java version "1.3.1_01"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.3.1_01)
Java HotSpot(TM) Client VM (build 1.3.1_01, mixed mode)
myhost% java -jar oc4j.jar -version
Oracle9iAS (9.0.2.0.0) Containers for J2EE
myhost% java -jar ./oc4j.jar -version
Oracle9iAS (9.0.2.0.0) Containers for J2EE
This is a bit complicated, but here's a quick resume of what I did:
* Install Oracle 9.0.1.0.0, including the http-server.
* Patch to 9.0.1.2.0
* download oc4j_extended, unzip to a new $ORACLE_HOME/oc4j
* Source the following file:
myhost% more java131.sh
setenv PATH /usr/j2se/bin:/u01/app/oracle/product/901/bin:/bin:/usr/bin:/usr/cc
/bin:/etc:/opt/bin:/usr/ucb:.:/usr/openwin/bin:/usr/openwin/lib
setenv CLASS_PATH /usr/j2se/lib:/u01/app/oracle/jre/1.1.8/lib:/u01/app/oracle/p
oduct/901/jlib:/u01/app/oracle/product/901/wmt/jlib
setenv CLASSPATH /usr/j2se/lib:/u01/app/oracle/jre/1.1.8/lib:/u01/app/oracle/pr
duct/901/jlib:/u01/app/oracle/product/901/wmt/jlib
alias java="/usr/j2se/bin/java"
myhost%
* Check that the right java verson is running:
myhost% which java
/usr/j2se/bin/java
myhost%
* start the oc4j server with :
java -Xmx256m -Dorg.omg.CORBA.ORBClass=com.inprise.vbroker.orb.ORB -Dorg.omg.COR
BA.ORBSingletonClass=com.inprise.vbroker.orb.ORB -jar oc4j.jar
And it reports back v. 9.0.2.0.0
So what am I doing wrong?
Any input will be appreciated.
Jens -
I am getting this same error on install of 9201 on Solaris 9 ; ld is core dumping - I have all of the required packages so I can't figure out why linking is failing, can anybody please give me a fix?!!?
Calling action unixActions2.2.0.6.0 make
installMakePath = /usr/ccs/bin/make
installMakeFileName = /opt/oracle/product/plsql/lib/ins_plsql.mk
installTarget = install
undoMakeFileName =
installArguments = ORACLE_HOME=/opt/oracle/product,
/opt/oracle/product/install/make.log
undoTarget =
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target install of makefile /opt/oracle/product/plsql/lib/ins_plsql.mk
Exception Severity: 1
*** Cancel Dialog: ***
User selected: Stop installation of all products.
Error in invoking target install of makefile /opt/oracle/product/plsql/lib/ins_plsql.mkHello,
a) Please crosscheck your environment variables and make sure you have access to all binaries/executables.
Ex: make etc.
b) Make sure you OS is patches as per oracle requirements.
<<Message>>
Error in invoking target install of makefile /opt/oracle/product/plsql/lib/ins_plsql.mk
Indicates that you may not have access to execute make utility.
-Sri -
Oracle 8.1.5 can install on SPARC solaries 8?
I have a copy of oracle 8.1.5 for sparc solaries 8 , but my colleage told me there is not compatible with solaries 8 and oracle 8.1.5 , only oracle 8.1.7 can be install on solaries 8.
is it true?Hi,
Check if the listener process has started or not.
Sometimes you will have to manually start the listener process.
Go to Oracle Home. Run lsnrctl from bin.
Now you may be able to connect.
Good Luck,
Raghuraman -
Hi Everybody
is there a doc or white paper that explain step by step how configure ipsec under solaris 10
Thankshttp://docs.sun.com
-
Hi,
I am new to Solaris and having problem with SVM to create mirroring on M4000 server with Solaris 10.
When I enter below command to create meta db getting the following :
# metadb -a -c 3 -f c0t0d0s6 c0t1d0s6
metadb: db: c0t0d0s6: overlaps with c0t0d0s1 which is a swap device
I installed the OS on disk1 (c0t0d0) and leave disk2 (c0t1d0) untouched. Below is the partition table of the both disk from "format" command line:
Part
Tag
Flag
Cylinders
Size
Blocks
0
root
wm
466 - 1249
6.74GB
(784/0/0)
14140224
1
swap
wu
0 - 465
4.01GB
(466/0/0)
8404776
2
backup
wm
0 - 64985
558.89GB
(64986/0/0) 1172087496
3 unassigned
wm
0
0
(0/0/0)
0
4 unassigned
wm
0
0
(0/0/0)
0
5 unassigned
wm
0
0
(0/0/0)
0
6 unassigned
wm
0
0
(0/0/0)
0
7
home
wm
1250 - 64985
548.14GB
(63736/0/0) 1149542496
Now the metadb -i command is showing the following result:
# metadb -i
metadb: db: there are no existing databases
Please help. Your help will be highly appreciated.
Do I need to create a new partition of 10M size? I think there is no unused space in my system coz I used default partition layout at the time of installation.
Can I create meta DB inside /home/export (c0t0d0s7) partition?
Thanks
johabdHello johabd,
The problem you face is related with the slice 6 on your spare disk c0t1d0. This slice does not have assigned cylinders. To successfully create metadb on that slice, repartition the disk so slice 6 or slice 7 has 20M (one metadb is 4M in size if I recall correctly).
You can create metadb on your current slice 7 but you will not use the space efficiently as it has 548GB.
Best practice for SVM is to create 2 copies of metadb on 2 different disks. I suggest 2 copies on c0t0d0s6 and 2 copies on c0t1d0s6.
Regards,
Maybe you are looking for
-
Why is searching so much slower in both Lion and Mountain Lion than Snow Leopard?
Hi, I use Snow Leopard run on several Mac Pros to perform multidimensional time-lapse-imaging in our lab. Snow Leopard provides instantaneous (seconds) searching for folders containing the image sequences I require for analysis (distributed across 4
-
How to create a document with SRM BAPIS
Dear colleagues, I have a problem with SRM BAPIs. I need to insert a pdf document into a record using SAP BAPIs, This document is already in a table in a binary format I am trying with these BAPIs: 1. CALL FUNCTION 'BAPI_SRM_DOC_CREATE'
-
HT201359 iTunes film download error. 2gb limit??..
I am trying to rent to 2 different films in apple store but both stop when reach 2gb. I have more than 8gb available of free space but cannot download the rest of the films. Can you help me? Regards. Dan.
-
Converting .rpt file code into Perl code
Hi All, I have some .rpt file which contains the following code to generate the report in Oracle .declare booking_no a13 .declare line_code a10 .declare line_booking a12 .declare book_date a11 .declare taken_by a10 .declare ud a10 .declare ship_name
-
Error using Object Editor pattern
Hi Gurus!!! I am creating a composite application using entity services created in Netweaver Developer Studio and UI patterns, in this case the Object Editor pattern. The problem is when I test the Object Editor configuration entering data on it, thi