QM 9 not record anything

I have installed QM on UCS server, Setup Configuration Setup is done. I have assign phones to user in Record Server Configuration. User, Team, Group in Personnel is created (non-AD) and configured the workflow to record all call. I am able to access QM web interface using username and password that configured in Personnel, but when I navigate to Recording menu, there is no recording anymore. I have check the dialy folder in client and audio folder in QM server, the folder is empty. I am able login to user web interface although there is error in diagnostic result.
I think connection to CUCM is fine since QM Administrator showed the phones from CUCM. And I have associated all phones in CUCM to JTAPI user for QM. Connection to UCCX is fine since Synchronize Databases in QM Administration is working with no error. Cisco Agent Desktop is working well.
I follow the guide Quality Management Installation Guide version 9.0(1) and Quality Management Administration User Guide version 9.0(1). There is no error after configuration. I attached some capture screen for additional information.
Anybody can help? Kindly need your help guys. Thank you.
Additional information :
-          Recording type : Server recording
-          Monitoring and Notification : Disabled
-          Phone type : CIPC – IP communicator
-          QM version : 9.0
-          Server OS : Windows Server 2008 R2 Enterprise

Helki,
please verify if you are using Server Based Recording (SPAN) or network recording via BIB in UCM?
If you are using Network Recording, ensure your devices are setup in the VoIP Device Table as such, and either users are assigned directly to a Device, or Profile if using Extension Mobility.
If doing Network recording, and no files are being generated on the record server, then there is probably an issue with the CUCM Monitoring and Recording configuration.
Highlevel this is how it works:
CUCM Sends QM Record Server SIP Invite
     QM Record Server sends ACK, and response with Recording Ports for Phone to send RTP
          Phone forks MediaStreams to ports of QM Record Server
               QM Record Server records call
Once QM Record server recieves a SIP invite it will generate a file, so start there:
The Link provides steps for CUCM configuration:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/8_5_1/ccmfeat/fsgd-851-cm/fsmr.html#wp1048989
If you are doing Server Based Recording (SPAN), a Monitor Server must be a Physical server.
then a SPAN configuration sends RTP directly to the Monitor Server and the Record server records interesting traffic.

Similar Messages

Captivate 5.5 Question: We seem to be having an issue with the screen capture piece not recording "e

Captivate 5.5 Question: We seem to be having an issue with the screen capture piece not recording "everything".
We're running 5.5 as an administrator on Windows 7 and my co-worker is trying to capture a webinar (GoToMeeting) with Captivate and it is not recording anything in the GTM window, except the last slide. Anyone have this problem or know a fix? Not much is mentioned in the Adobe forums.

Captivate simply doesn't 'hear' some screen events on certain applications and you just need to resort to doing manual captures at these points.
I usually set up my manual capture button to be F2 so that I can hit it with my left hand while my right hand is on the mouse navigating through the task.

UFT (QTP 11.5) does not record Chrome

Hi
I have recently installed UFT (QTP11.5) and successfully recorded scripts against a web app running in IE8. However, I have issues with Firefox and Chrome:
Firefox v16:
Will record in what appears to be the Terminal mode ie will record mouse clicks on objects via coordinates and when entering text in a field it will simply record this as keyboard input.
Chrome v22:
Will not record anything at all. No objects or low level Terminal mode script is recorded.
Has anyone else seen this? Note: I have installed the GUI Testing Web Add-In and checked it was active on launching UFT.
Thanks

Hi,
When I am trying to create a new test or trying opening an existing test it shows an exception with below message.
"An unexpected error occurred.
Click ‘OK’ to close this message. You may be able to continue working,
but note that this workflow may cause the error to occur again.
Click ‘Details’ to display technical details on this error which may help
you solve the problem, or can be used when contacting customer support."
Due to this exception I can't create or execute any test in QTP 11.5 (UFT).
Does anyone know how will I be able to resolve this issue?
Thanks in advance.

Captivate 4 will not record software simulation with Windows 7

Hi,
I have a Dell M6400 labptop, 32-bit, operating system is Windows 7. The patch I downloaded through Help->Updates-> on Captivate fixed
my microphone problem, but did not help the software simulation problem.
I get as far in the process as having the screen setup with the red bounding box and controls visible. After choosing automatic I then click on the record button. There is a shutter sound, but it won't save anything. I get back to Captivate and it has not recorded anything.
I then installed it on my main computer which is 32-bit and uses windows xp. I did exactly the same thing as my above mentioned laptop and it did the software capture beautifully. So it must be the Windows 7.
I am disappointed that the patch didn't fix that. Will one be coming soon that will?

Okay, I have been trying to use Photoshop CS4 Extended as my software simulation. It refused to work on Captivate 4
numerous tries, but now for some reason it is working fine. The only thing that I did different was to go into Photoshop's
preference-->performance--> and the openGL was unchecked and I checked it. I think that Photoshop had a problem and turned off the
the openGL. I have the latest update for my graphic card, so I'm not sure why it affected the GPU.
I didn't think to try other programs, but now I have, and they are working fine too.
It could be that the problem was with Photoshop instead of Captivate.

Audition CC Recognizing Mic, but Not Recording

I have a Rode NT1-A mic that I have been using on Adobe CC Mac for sometime now, and up until a couple of days ago I had no issue. When I set up the hardware, it finds the mic. When I navigate back to the Multitrack screen, I am able to select the mic for the track input. However once I hit R and I to record and monitor, I get absolutely nothing. No metering at all. I go as far as to record something and still, I get utter silence, it's not recording anything. I am not sure how to fix this, as literally a couple of days ago, I was using this same mic, interface, and XLR to record. I appreciate any/all help.

You haven't said what the interface is, but has the phantom power got switched off? That would stop it working whilst it still appeared as a legitimate source...

On Location Not Recording Canon Camcorder

Ok ii know canon camcorder isnt exactly the greatest, but i did just find out why it wouldnt record.
a little history....It would show video on screen, record button looked armed, but hittin it would not record anything.
however other software and even premiere would control playback and capture whatever was on tape.
so looking at previous post about webcam got me thingking, i had a install of camtasia v3 and it was showing up as a possible source in
on location.
so i uninstalled it.
now i can record grainy video with my canon camcorder.
of course i get the impression this may relate to other higher priced camera's as well.
so consider yourself informed.
be weary of Camtasia.

Thanks for this additional info, PhotoJoe. I've added this detail to the bug report.

My iphone 5 ATT, i can hear the recording, but can not hear anything from neither ear speaker or loud speaker when i call? what is the problem? what can i do, it is out of warranty.

My iphone 5 ATT, i can hear the recording, but can not hear anything from neither ear speaker or loud speaker when i call? what is the problem? what can i do, it is out of warranty.

1357b wrote:
My iphone 5 ATT, i can hear the recording
What recording?
but can not hear anything from neither ear speaker or loud speaker when i call?
You just wrote you could hear the recording...
You can take it into an Apple store and have it checked out.

I cannot record anything on iPod shuffle. Why? I do not recognise any of the windows shown in the various manuals about shuffle. Why? Currently an Orange light is blinking on the shuffle, and has been doing so for hours. Why?

I cannot record anything on iPod shuffle. Why? I do not recognise any of the windows shown in the various manuals about shuffle. Why? Currently an Orange light is blinking on the shuffle, and has been doing so for hours. Why?

I finally stumbled across a fix for this problem, and in case someone else is frustrated at some point by a similar issue I'm posting what finally worked to enable me to bring iTunes up at any time (without rebooting first).
The solution was to go to the preferences to uncheck "search for shared libraries".
I'm glad the problem is fixed, but Apple developers really should include a timeout function on iTunes search for a shared libraries. At least a visual dialog to confirm that the application is in the process of searching for a shared library on the network would help provide clues as to what is causing the spinning beach ball to appear right about the time the application window should pop up.

Digital Inputs do not record over long time periods

I am running Signals Express 2009 with a USB-6009. I have a project that needs to record the states of 8 digital inputs over a 24 hour period. The inputs typically do not change state for long periods of time. When I run the project it does record and gather data if I stop it "soon"(I have gone as long as 30 min.) When I leave it running overnight it does not appear to record anything.

If you have not already, you should try turning off display updates in the "Operate »Update Signal Views While Running" menu item. Set this to Update None. Also, turn off "Prepare log data for viewing" under the Logging part in the Tools » Options dialog.
When I ran your project overnight, it ran out of memory. The first error it threw was "Not enough memory to complete this operation." The problem was that SignalExpress saved a great deal of data in memory for easy displaying while it's running, but this grows too big when it runs overnight. The second error was as follows:
Logging Stopped:
Logging was stopped because an error occurred with a Step in the Project.
If this error is because of a device buffer overflow, you can improve performance by turning off display updates using the "Operate »Update Signal Views While Running" menu item.
You can also change the way signals are logged by changing the Logging Options in the Tools»Options dialog.
Turning off the "Prepare log data for viewing" will greatly improve performance.
Mark E.
National Instruments
Schedule a Free 1-Hour online LabVIEW Tutorial with an NI Applications Engineer

Safari Not Recording Browsing History

I have a new iPad Air. Safari is not recording any of my browsing history. I checked my General settings, Privacy settings, and Safari settings, but I can't find anything that would cause this problem. I also tried powering down and restarting. Anyone have suggestions on how to fix this? Thanks, Greg

Make sure that private browsing is not enabled.
Click safari then click the icon on bottom right looks like two boxes one in front of other.
Once clicked select private on bottom left.
Good Luck!

Priemier Elements 8.0 will not do anything after opening - what do I do?

Newbie here, I am new to Adobe and it's products. I must say, trying to find information on here is a bit frustraiting...
Anyway, I have downloaded the trial version to try before I decide to purchase and I am wanting to edit a video, something about 45 seconds long. I am able to open and get one of my videos from my computer and add it to the program and I was able to Run the Auto-Analyzer but when I click on Fix nothing will happen. It shows the Photo Fix Options on the right with several options and none of those will work on the video and down towards the bottom it gives an option of Edit Videos and when I click on that a purple box will show up with various Adobe information and look as though its going to load up so I can edit vidoes but nothing will ever happen. Basically there is nothing I can do with vidoes other than add them and auto analize them. Below is a screen shot of what I see.
Can someone please advise me what to do? I have watched ALLOT of the videos of what you can do with this program but I can't even get anything started to even try any of it...
Please help me and Thank You in Advance, Charyl

Hi ATR
What I do is click on the Adobe Premiere button and it opens up to a purple page giving me the option to select Organizer, New Project or Open Project.
I have no projects to open so that narrows it down to the two and when I click New Project nothing ever happens, it looks like it is loading by several words flashing by in the upper right hand corner but it does not do anything, one time it did but it was something about an error and wanted to report it to adobe. It wasn't your typical error box, it was rather large and gave me an option to fill in information of what I was doing when the error occured. This means I only have one option and that is to select Organizer so yes, I was in Organizer mode since that is all that will open. I assumed I can get there from the Organizer.
It is the newest version of Adobe Premiere Elements 8.0.
The two thumbnails you see are two short videos (17 seconds & 45 seconds) that I wanted to play with in edit mode to see how it works, how easy and all that.
Yes, it is the tryout version. I did download the Patch.
I am not sure how to find the Background Rendering feature.
On the AutoAnalyzer, I selected that because one of the support videos said I had to do that before i could edit.
I have been at this for 2 days and my mind is a big blob mess after trying to figure this out and not being very successful I have been downloading other programs and trying to learn them as well and since I am on a big time crunch and I am forcing myself to do crash courses of what I thought was going to be as simple as downloading one program and working a whole afternoon figuring it out, I may not be thinking straight to completly understand everything your trying to tell me. I will probably have to give up, try something else and come back and play with this when I have time to play.
My goal is to produce a 45 second commercial for a Sears/St. Judes Research Hospital contest. I am on my own so I will be using my camera which has a video feature and recording myself and I will have to edit it to cut out areas such as when I get up and down to turn the camera off and on and adding photos, text and back ground music with narration and making it all flow nicely in one 45 second shot.
I think you are right about me being stuck in one area, I think I am stuck in the Organizer hoping when I click edit or fix (the orange tab) and then trying to select edit videos at the bottom that it will open the correct page. I guess I am beating myself up on this one and probably have to completely remove/uninstall and reinstall because obviously it is not working properly.

Smart Recorder does not record. Time is not increment

Hi
I have just purchased a new X-Fi Extreme Music sound card.
I cannot record anything in Smart Recorder. The time display just stays at 00:00:00 when I press the record button. It is not because I enable the wait for sound feature. It just won't start.
What is wrong? Software bug in Smart Recorder? Any other with the same problem?

Nothing yet I think.
I tried to mail Creative support, but it seems like they have no clue about what is going on.
They keep telling me to try all sort of things, such as new drivers, install in safe mode, anti virus might have messed up the installation, etc...
I have followed their advice, but it does not help.
I'm stuck
I am just hoping that a newer version at some point will fix the problem.

I purchased Elements v 13 and need to reload it. Adobe (my account) does not show anything. How and where do I go to download program? Thanks

Where do I go to download Elements v 13 that I purchased? Adobe (my Account) does not show anything.
Thanks

PSE 10, 11, 12,13 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
PE 10, 11, 12,13 - http://helpx.adobe.com/premiere-elements/kb/premiere-elements-10-11-downloads.html
Make sure you register the software with Adobe. If you did not purchase it thru Adobe they will not have a record of the purchase in your account.

Garage Band hears my audio signal, but will not record it.

I posted this problem initially with the imprecise heading, "Recording in Garage Band," about midnight last night...so far no response, but it's only 8:00 am. I am almost brand new at the discussion group game as well as being brand new to Garage Band. I had the non-recording problem initially a month or so ago, and aired it in this forum. I got an answer almost immediately, advising me to delete two .plist items and the problem should be cleared up...and as I recall, idid and it was; but a day or so afterward, before I had a chance even to try recording anything, I had a major computer disaster and lost all my saved email, including the directions to the folder containing the offensive .plist gremlins, as well as all my bookmarks and my iPhoto library for the last two years. I'm not really geeky enough to figure this stuff out properly, so I've been reconstructing things pretty much from scratch as best I can.
I've looked for those .plist artifacts since, hoping I might recognize them if I saw them, but no luck. I've screwed up so much already, that I am loath to delete things when I don't know what they are or even where I'm supposed to look for them.
Jon Bradley, Cloverdale, Ca.

The easiest way to find them is simply search your hard drive for "GarageBand", the ".plist" and ".cs" files will show up in the results.

G60 214 upgraded to XP Pro SP2 all good but microphone not recording

Hi all,
just upgraded an HP G60-214 to XP Pro SP2 with much assistance from yourselves for which many thanks !
Getting the Conexant HD 221 sound to work was difficult but is now good but I'm having trouble getting the microphone to work.
Device manager shows an NVidia driver and says it's working properly but 'Sound Recorder' doesn't record anything and neither does Skype. The volume is set to maximum and it isn't muted.
Anyone got this to work under XP ?
Thanks for looking !

Hi
I have a similar problem.
If I use skype, or infact other programs, the microphone seems very unstable.
In most of my skype calls I loose the mic at some point or another. during these drops Skype warns me that the mic is very low, but I have not changed any settings. It seems that there is a problem with the integrated mic. Loose connection or something. This is not just with Skype but with other programs where I use the mic. However, there is no problem with hearing the other side of a call. Thus speaker is fine. Tired of this problem as I cant call without having problems. Please help.
thanks in advance.

QM 9 not record anything

Similar Messages

Maybe you are looking for