QM layout set QM_QCERT_01 for certificate profile

Experts,
I'm creating a certificate profile in QC01 and I want to assign form QM_QCERT_01 as a layout set. It's the standard SAP form for the quality certificate.
But I get the error message: "Text QM_QCERT_OFF_SPEC_TEXT not available for layout set QM_QCERT_01" (Message no QC 094).
Diagnosis: In the form QM_QCERT_01, a reference exists to text QM_QCERT_INSPECTION_METHOD (text ID ST, language EN). However, this text is not available in the current client. This may be due to one of the following reasons:
o The text is only available in the original client.
o The text is not available in either the original or the current client and should therefore be created.
System Response: The text cannot be evaluated while the certificate is being created. Information and logical queries could be lost for this reason.
Procedure: Check your entries in form QM_QCERT_01. If required, create the text QM_QCERT_INSPECTION_METHOD.
If the text is only available in the original SAP client, copy it in all languages (if necessary) from the original client to the current client. To do this select Tools -> SAPscript -> Standard text -> Utilities -> Copy from client.
How do I check if the text is available in the current client? How do I add or create the missing text?
Thanks. Rgds

If you are not sure then you can copy the std form and text in SPRO>QM->basic settings>
Transfer QM Standard Texts
Transfer QM Forms.
hence from 000 client this will be copied and then you can check it once again..if still problem persistis then it is sure that it is not available in std sytsme and you need to talk to ABAPer to cretae a text element QM_QCERT_OFF_SPEC_TEXT .
This may be created in your client and assigned to layout...just check

Similar Messages

I can't remember the password I set up for Certificate-based signatures. How do I request this password?

I can't remember the password I set up for Certificate-based signatures. How do I request this password?

The password is yours to keep and remember. Adobe do not have any backdoor to get it back -- because if there were a backdoor, hackers would use it.

Packing list - Driver Program and Layout set name for Smartform

Hi ,
Anybody knows about print program and Layout set name for PACKING LIST in Smartform.
Regards,
Kumar S

Hi Bhuvaneswari,
For Creating Adobe Interactive form, you need the below configuration:
Server side:
Server running on ABAP/Java stack configured with ADS
For ADS Configuration, follow the below link:
https://service.sap.com/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=0000894009&nlang=E
Client Side:
The required Reader version depends on your usage situation.
For SAP Interactive Forms by Adobe, we generally recommend the following:
Adobe Acrobat Version 7.0. 9 or higher
Adobe Reader Version 7.0.9 or higher
If you require forms for one of the scenarios listed below, you must use Reader 8.1.
These are:
Forms in Web Dynpro applications that are integrated at runtime using xACF (Active Components Framework) ZCI (Zero Client Installation).
Forms in scenarios that use digital signatures.
If you use interactive forms in Web Dynpro for Java and these interactive forms are included using ZCI (Zero Client Installation) at runtime, you must read Note 1055911. Note 1055911 specifies the required reader version and contains further detailed information.
Reward points if found helpful.
Regards,
Arafat

Idoc/BAPI for Certificate Profile creation

Hi,
Is there any Idoc/Bapi available for Certificate Profile creation (Transaction Code QC01).
Appreciate your Inputs.
Thanks.
Regards,
Pc

BAPI_USER_PROFILES_ASSIGN Change User-Profile Assignments
SUSR_BAPI_USER_PROFILES_ASSIGN Methods of object USER
Edited by: Mahalakshmi Padmanaban on Feb 15, 2008 1:51 AM

Set alerts for resource profiles

How can I set alert in 10g OEM grid alerts for resource limits set in for a particualar user profile.
Let's say we want to get an alert when sessions_per_user reaches a value of 90 if sessions_per_user has been set to 100.
Kindly guide and provide navigation if possible.
Regards

If the existing metrics don't cover what you need you'll have to create a user defined metric. read the documentation on metrics, and shout if you still need help

Layout set name for Payment advice and Cheque

Hi All
Pls let me know the SAP standard Layout name for Payment advice and Cheque
Regards
Madhan D

Hi
Layout name: F110_PRENUM_CHCK
Regards
Ansari

Customize the layout set used when opening a folder in search result list?

Hi,
I have created a search result iView that uses a predefined search query to show a list of folders. If I click on a folder (rnd:displayname(contentLink)) its content is displayed in a new window. Here the layout set Consumer Explorer (default profile?) is used.
I want to use a custom layout set in this window. How can I achieve this?
Regards,
Mario

Hi Mario,
here the answers:
> 1. Develop an own UI Command where you can give
> the LayoutSet as a parameter.
>
> Do you know where I can find some code sample?
You can either check the <a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/Implementing%20Flexible%20UI%20One-Step-Screenflow.article">Implementing Flexible UI One-Step-Screenflow</a> tutorial by Thilo Brandt or search here on SDN for "UI Command implementation" examples.
> 2. Create a Layout Profile with your own Layout
> Set and define it as the Default Layout Profile.
>
> How can I find out for which operations/standard
> iViews in KM (copy, move, create link...) the default
> layout is used to avoid surprises when changing the
> default profile?
Normally, as you can see in the above mentioned <a href="http://help.sap.com/saphelp_nw04/helpdata/en/25/59bb2eece725498427334e0e21b80c/content.htm">Priority of Settings</a>, whenever the KM Navigation component (com.sap.km.cm.navigation) is opened without a specific layout set the global default layout set is used. As you can give this parameters by different ways (as URL parameter, in the KM Navigation iView configuration, via OTH file definition, hardcoded or configured in the configuration of an UI Command, etc.) it is nearly impossible to find all situation where your users will get this default profile.
The UI Commands (with selection) you mentioned like "copy","move","create_link" use the configured LayoutSet (ConsumerOnlyFolderSelector) from the KM Configuration (of the command).
> 3. You can also create a Layout Profile and go to
> the root folder(s) of the search on "Details" ->
> "Settings" -> "Presentation" and select your profile
> in the tab "Settings for all users".
>
> I think it is to complex to change all existing KM
> Navigation iViews to forced mode.
>
One idea would be to use the <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/0f/764b87dfb948fcb13fd7695e157892/content.htm">Multiple Property Replacement</a> feature by SAP.
> Can you give me a hint on the other possibilities you
> want to publish?
Of course. One other possibility I have in mind is to work with OTH files. You might also search here on SDN to see how to use them for setting the layout set for specific folder paths.
Hope this helps,
Robert

Best Practice for Roaming Profiles over Branch Offices

Hello Everybody,
I was hoping I could gain advice from experienced engineers on an issue me and my team are currently experiencing.
The issue:
We have a client that has their main office in London and this company has other remote offices over the world, Paris, Milan, Luxembourg etc.. Each remote office has a local DC&file server installed as two separate servers or both roles on the same
server. Everything is central to London, all the main file shares that the company uses is based in London and the terminal server's are based in London too.
We have DFS-R & N set up on the London File servers to replicate the dfs shares over the remote offices which works fine and we don't generally ever have any issues with this and works well when user's in remote offices access file shares from
London.
However and I didn't set this up but this client also has DFS-R & N set up for roaming profiles!!! The issue we are having here is only with the terminal servers. For example I will log in as one of the users from London on the terminal server and will
load the profile fine, I will log that user off and log in as the admin and remove the profile through advanced system settings. I will then log back on as that same user and will be given a temporary profile, I repeat the first step and the profile loads
fine, so every other log on will load the user with a temporary profile. I know this is the case because for that user, if I change the profile path in AD from
\\xxxx.com\public to
\\lon-fs3v\profiles$\user it then loads every time with no issues. Before anyone asks I have rebuilt the terminal server(s) to rule out if they were misconfigured. You may ask why not do that for everyone? We can't do that for people based in Milan otherwise
their profile will forever take time to load and that's where the dfs replication comes into play for the profiles.
Unfortunately they are a very stubborn client so some users (important people) have very large profiles which sometimes takes a while to load up.
I have done some reading already on the web and have seen the unsupported scenario from Microsoft regarding this (
https://support.microsoft.com/en-gb/kb/2533009 ) so unsure the best way to do it. The link I've put in does say you can have issues with the profiles loading (which we do) if there are too many
connections which we have 10 to replicate profiles around the remote offices.
I have done some reading into the hostedbranch cache method but not sure if you can do this with roaming profiles or not?
We generally want to eliminate the issue for users when logging on remotely with getting a temp profile every other log on attempt. I must add though this issue never occurs on the workstations just the terminal server, our client is in the private equity
market so one user may just spend one day in a remote office and then come back to London to carry on as they normally would.
So that's the background to the issue and I was generally trying to work out what methods or if this is possible with the branch cached method for roaming profiles ?
Thank you to anyone who replies.
Best,
Liam

Hi UC3ngineer,
Agree with Luca.
If the branch users need to do lot of conferencing, the best practice is to deploy an new Front End Pool and an Edge Server in Branch Office; Otherwise you must have a 100%
reliable WAN connection to your central site.
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Layout Set - Suggestions?

Overview
I have a KM iView that allows users to create forms and store them in a KM folder (/documents/broadcasts).
So when the user accesses the iView they see a left Menu Tree displaying:
Broadcast
     - Folder 1
     - Folder 2
     - Folder 3
When the user clicks on their folder they see the forms they have created. In order to create a new form the user clicks Folder->New->Forms this allows them to select between News or Announcement. When they make a selection the correct form shows up etc...
Everything works fine but I would like to simplify things for the End users. Here is what I would like to change:
Issue 1
There is a horizontal menu above the Menu Tree showing 5 context menus (View, Folder, Selection, GoTo, and Search). I really don't want users to have access to all of these menus but since I didn't create any of this I am unsure how to remove the menus. I am assuming they come with the Layout Set used for the iView?
Issue 2
Having the user click Folder->New->Forms is also very confusing and I would rather have just the New menu at the top (as WPC shows) which gives the user the News and Announcement options. So they would Click New->Forms or just New->
If anyone has any suggestions or pointers I would appriciate it.

Hi TA,
I would suggest using 2 layout sets... The NewsExplorer layout set for the sub-folders and maybe ConsumerExplorer for the root layout set. The iView would have the "Layout Set" as NewsExplorer and the "Layout Set for Root Collection" as ConsumerExplorer.
You might need to make a copy of the NewsExplorer layout set and add the 'Back' button to the collection renderer so users can get back out of the sub-folders.
Issue 1 will be handled by the fact that you're not using the AdminExplorer or other Tree List with Menu layout set.
Issue 2 should be handled by the NewsExplorer layout set which just gives a list of the Forms available to the folder with 'new' in front.
[New News|]         [New Announcement|]
ItemListRenderer 1
ItemListRenderer 2
Good-Luck.
Regards,
Graham
Edited by: Graham Hoggard on Feb 18, 2009 7:14 PM

2 renderers in layout set reading from different areas of km repository

Good Day
I have a layout set which contains 2 collection renderers.
Each renderer must display content from different areas of the km repository in a way that is controlled by the KM Navigation iView parameters "Path to root folder" & "Path to initially displayed folders"
For example :
Renderer 1 should display content from the path specified in "Path to root folder"
and Renderer 2 should display content from the path specified in "Path to initially displayed folder"
Is this possible? If yes, then how can i do this?
Renderer 1 is a custom renderer that displays folders almost like in a tree structure.
Renderer 2 is a EntryPointsCollectionGridRenderer
Kind Regards
B

Hi B
I don't think you are aware of the use and limitations of the KM Navigation Iview. Have you read the documentation at http://help.sap.com/saphelp_nw04/helpdata/en/b6/29892e91601940bb7a2cd673a1dff5/frameset.htm?
"When i view the page it only displays the LSROOT layout set. It actually only displays whatever layout set is specified under the parameter "Layout Set for Root Collection". The page does not display LSFOLDER.
Have i done something wrong?"
Since I don't know exactly what your layousets consists of and how you have configured the KM Navigation Iview, this is hard to say. But perhaps it is caused by you specifying a path in "Path to initially displayed folder" that is not a subordinate to "Path to root folder for navigation".
"Would it be possible for LSROOT and LSFOLDER to display contents from different paths in the repository?" Yes, it is possible to display two different paths with two different layout sets. Thats what the "Path to root folder for navigation"/"Layout Set for Root Collection" and "Path to initially displayed folder"/"Layout Set" are for.
But no, it is not possible to display (merge) the content of two different folders using the KM Navigation Iview. Then you will have to create a taxonomy first or create some other kind of workaround. But I don't know if that was your aim in the first place.
Kind regards,
Martin

Certificate profile table

Hi All,
Pl.tell me the table for certificate profile and materials assigned to it ,as i have to develope a report in which i want to pring MIC's for those materials only which is assigned to certificate profile only.
Thanks in advance

Hi
QCVK - Certificate profile header
QCVMT - Certificate profile characteristics level : Text
ZQCVM - Certificate profile characteristics level
QCVV - List of preliminary products
Thanks and regards
Murugesan

Set up quality certificate printing for deliveries

Hi,
to print a quality certificate for a delivery,
1. do you need a certificate profile? Or is that only for QC for a batch and for an inspection lot?
2. do you always use usage B?
3. do you always use application V2?
4. how do you set up condition tables, access sequences, condition types and output determination procedures?
I created an output type (copy of LQCA) in application V2, assigned a program (RQCAAP00), a form routine (entry) and a form (QM_QCERT_01). I also created and released a certificate profile.
But when I run QC20, I get the message
"No messages for initial processing exist".
What could be the error?
Thx.
Jessica

Yes, you always need a certificate profile. Usually you always use V2 (shipping). The form you used, QM_QCERT_01 is only an example form that SAP provides. It should be copied and must be adapted for your businss and you'll need a person knowledgable about SAPscript to make changes to it. I believe there is another for a COC (Certificate of compliance) which might be more what your looking for if you don't need to report batch values or inspection lot vales.
Your probaly missing the certificate recipent record. You'll find this under the QM area under Outgoing certificates. You can try adding LQCA output type directly to the delivery in the item outputs. (Any good SD person on site should be able to show you how to do this)
To understand condition tables and procedures I would again turn to an SD person or a pricing person. They use the condition technique a lot and should be able to explain it easilly. They should also be able to help with setting up the output procedures and related items as well.
Craig

In Initial View, can you set defaults for Navigation tab, Page layout, and Magnification?

Adobe Acrobat 9 Pro V9.4.0
Win7 Pro x64
Problem: In Initial View, can you set defaults for Navigation tab, Page layout, and Magnification?
Every time Acrobat scans a document, I have to go to Initial View to set Navigation tab, Page layout, and Magnification. It does not remember the settings I last used.
Thanks in advance.

See my response to this post

Setting alv layout as defualt for all usres

Hi,
Is it possible to set the webdynpro alv layout set as default for all users.
I need your input if this is possible in WD ABAP ALV setting.
Thanks in advance !
Alok

I found the answer to my question on my own by just digging into the options available in ALV.
Thanks,
Alok

Last computer i was able to make 3 profiles and run 3 windows. each time it asked for the profile when i wanted to start each window. how can i set that up again

ast computer i was able to make 3 profiles and run 3 windows. each time it asked for the profile when i wanted to start each window. how can i set that up again

last time some1 set it up for me. i would only have 1 shortcut on my desktop. everytime i clicked on it, it would ask me which profile i wanted. even if i had 1 or 2 of the others open it would still ask me which profile i wanted to open. i want to be able to do it that way again.
yes i already set up the 3 profiles. but once i open up the one profile, and click on the short cut to open another, it just opens a brwser window with the profile in use. so i could open 10 windows, its only 1 profile, the first profile i used.
and yes i have the box not checked

QM layout set QM_QCERT_01 for certificate profile

Similar Messages

Maybe you are looking for