QM Lot for Defect Items

hi guys,
Inspection lot for FERT were created, results recording was done for the lot qty (20 Nos), and 18 nos were accepted.
For the balance 2 nos defects recording was done and notification was raised (q3), then qm order was raised via notification.
my problem's are
when will be new lot created for balance 2 nos?
how to confirm the qm order?
i.e, some consumbles and activity (Lbr hrs) were used, i need to confirm the same and close the order,
pnts will be given
tks
murali

Are we talking about an 04 lot?  If so, you would post the 18 to unrestrcited and the other two to "Other material" where you would post it to another batch.
Craig

Similar Messages

  • Clear inspection lot for defect items

    Hi All,
    What is the process if i found the inspection lot have defect
    how do i create the notification .and result. after moved it to blocked stock.
    how can i close the nodification and change the result and do the ud for the lot.

    Hi
    What is the process if i found the inspection lot have defect
    If inpsection lot have defect then,You can go to defect recording & record the defect against operation or nspection lot or against a MIC.
    Every Defect has defect class which will decide whether the notification os to be kept open or close after UD is taken.
    This is part of customization.
    how do i create the notification .and result. after moved it to blocked stock.
    While creating inspection type in customization through QCC3--> Inspection lot creation >Idefine insp types->say 01 inspection type here maintain F2 type of defualt notification which will trigger after defect is recorded.
    You can record the results.Then from UD stock posting screen in QA11/QA32 you can post material to block stock.This is also possible through action box of notification.
    how can i close the nodification and change the result and do the ud for the lot
    Once Defect are reorded you can go to notification.Assign the Tasks to Users.Complete the tasks ^ sucessfuly close it.Check the status of all task must be TSCO TSSC.
    You need not to change the results recorded again after material is OK as this is First yield of the lot.
    Then move material form Block stock through notification. & close the notification.
    I hope this will help
    Regards
    Sujit

  • GRN With 2line items(material,batch same)one inspection lot for 2line items

    Dear Experts
    As and when we make a GRN with 2 line items and same batch number we enter no. of containers differently but only the number from the first line item is flowing into the Inspection lot origin.We are creating only one inspection lot for 2 line items as the batch number is same for the items.
    1. In material master i have given 01 inspection type ( with control inslot.. Each material document,batch, storage location) :---
    this is the reason system is creating only one inspection lot.
    i am entering manually same batch number for 2line items...
    Here my problem is ... while giving UD... SYSTEM IS PICKING ONLY FIRST LINE ITEM NO.OF CONTAINER... IT HAS TO BE BOTH LINE ITEMS CONTAINERS.... IT IS PICKING BOTH LINE ITEMS QUANTITY... NO.CONTAINER ONLY IT IS NOT PICKING....
    Waitting for  experts reply

    Hi,
    As per your query if you put in MM forums then you will get the reply immly.
    Anil

  • Inspecyion lot for delivery item

    Hi Experts,
    Please help.
    I have created sales order. Then created Production order with reference to that sales order. Processed poduction order. Stock posted to QM stock. Done Result recording & UD. Stock posted to Unres.use stock. Now I want to quality inspect for delivery item of same sales order.and want to create quality certificate. What are setting require.
    Please tell step by step.

    Dear Raja,
    Adding to Shyamal answer for Inspection for delivery you may have to do these steps also
    1) SPRO > QM> Quality Inspection > Inspection lot creation > inspection at shipping > Assign inspection type to delivery type> assign inspection type 10 to the delivery type you need the inspection
    2) Maintain customer info Record. QV51 which is a customer ,material combination. You can specify whether or not an inspection lot is created before or after the goods are shipped, or whether the quality inspection will be carried out by the customer.Also you can maintain default customer specifications for a customer or customer information records for customer/material combinations
    3) Maintain 10 inspection type in MM02.
    4) Create the inspection plan using the relevant Usage
    Hope this helps
    Regards
    gajesh

  • Inspection lot for defects

    Hi friends,
    If during inprocess/final inspection, inspection lot is generated for 30 nos. now i record 5 nos defect,5 nos scrap,20 nos ok.
    so can i post the 20 nos into unrestricted use.
    Now if i want to do rework on the 5 nos defect,  and the 5 nos are ok, how is the inspection lot generated in this case.

    Dear Nandi
    so can i post the 20 nos into unrestricted use.
    Yes, you can post 20 into Unrestricted, 5 into Blocked, and 5 into Scrap.
    now, if you want inspection lot after rework, you can go with "Inspection lot for material Movement".
    Assign, 08 inspection type in Material master, Create inspection plan with Usage: 09.
    and transfer that material from Blocked to Quality using 349 movement.you will get Inspection lot.
    Regards,
    Amol.
    Edited by: Amolbook on Dec 1, 2011 7:59 AM

  • ASCP: Lot for Lot at item level.

    Hi All,
    In ASCP plan we can enable lot for lot but do we have the same option at Item-org level.
    I don't want ASCP to aggregate the planned orders for some of the items in the plan.
    Regards
    RS

    Sorry - there is no way to selectively disable lot-for-lot for some items.
    It is all or none.

  • How to create an inspection lot for each line item of the Purchase order?

    Hi,
    How to create an inspection lot for each line item of the Purchase order ?
    In detail if possible.

    Hi
       please check this
    [thread|Create Inspection Lot;

  • Single Inspection lot for multiple line items.

    Hi,
      We have a scenario while receiving goods.We receive boxes and want to print labels.For eg we have a Purchase Order and receive 10 Items and a material document is created for 10 qty and a Inspection lot is created.
    Since we want to print a label for each item we propose to create a line item on a GR thus creating 10 line items.
    The problem is we get 10 Inspection Lots which we dont want.
    Our requirement is to print 10 labels by having ...
    1.One material Document with QTY 10 and one Inspection Lot with QTY 10.
    2.Have 10 line items in GR to print lables but have one Inspection Lot.
    We do not have batch management activated.
    Thanks in advance for help.
    Regards
    SM

    Hi SM,
    It's very easy,
    If I am not wrong you are asking about the inspection type 01, correct?
    Then go to material master->Qm view>Inspection set up---> now for the detailed information for inspection type 01,, set the option "FOR EACH MATERIAL, BATCH AND STORAGE LOCATION" ( i know you are not batch managed but set this option) for the field "Control InsLot"
    Have the fresh PO and then GR, system will do exactly as you asked for,
    Regards,
    Shyamal

  • I have configured a new one iphone 4s I have done it via wifi i has caught myself for defect the you ID (mail) of a person that toward a lot of time habia lived in my house.  Someone can tell me the because??

    I have configured a new one iphone 4s I have done it via wifi i has caught myself for defect the you ID (mail) of a person that toward a lot of time habia lived in my house.  Someone can tell me the because??

    PinguXeF wrote:
    , while I have taken a backup of the iTunes Library,
    this means nothing if it was not done correctly...
    To have  EVERYTHING on a New Computer...
    From your OLD computer...
    Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
    Full Details Here  >  http://support.apple.com/kb/HT1751

  • One inspection lot for multiple materials of purchase order line items

    Hi All,
    My client requirement is one inspection lot for multiple materials of purchase order line items.
    Please share your thoughts.
    Thanks in advance for early reply.
    Regards,
    Jishu

    I totally agree with Amol.
    I don't think I would touch that development nor would I ever tell a client it could reliably be done through development.
    Knowing what I know about the table structures, I don't think you could create any development for this that could use a significant amount of the existing tables and functionality.  I think you'd have to create all your own Z tables and basically rebuild the functionality.  Tying it back in with SAP data will be difficult.
    You're even looking at all custom screens for your results recording and UD as well.  And if you have follow-on functions like batch classification requirements, batch determination, COA publication, results copy functions, use of DMR and sampling procedures, physical samples, quality notifications, etc. etc.. you could be looking a whole lot of development.
    Craig

  • HT1766 Hello there, started to sinc my iPad 3 to my iPhone 5 with iCloud and a lot off the items did copy over, I was connected to a power supply but for some reason it's still missing half the items and I am struggling to retrieve them can you help pleas

    Hello there, started to sinc my iPad 3 to my iPhone 5 with iCloud and a lot off the items did copy over, I was connected to a power supply but for some reason it's still missing half the items and I am struggling to retrieve them can you help please.
    Thank you Callum Gordon

    Well the term "hotlined" I have never heard before. In any case many states (like NY) just passed regulatory powers to the State Public Service Commission of which it may be called something different in your state. You could file a complaint with them. Or file a complaint with your state attorney generals office, they also take on wireless providers.
    The problem here is the staff you speak to are poorly trained, in days gone by it took one call to them and they pulled up your account and see the error and had the authority to remove any errors. They did not remove legitimate account actions, but used their heads instead of putting a customer off or worse lying to the customer.
    Its a shame you have to go through what you going through.
    Good Luck

  • HT3552 I am billed 3 times for a same item. How can I get the problem fixed? Thanks a lot for your help.

    I am billed 3 times for a same item. How can I get the problem fixed? Thanks a lot for yur help. nhuttan448

    Go here:
    http://www.apple.com/support/itunes/contact/
    and follow the instructions to report the issue to the iTunes Store.
    Regards.

  • Can we allocate Lot/Serial numbers while taking PO receipt for Exp Items?

    Hi,
    Can we enable and allocate the LOT/SERIAL numbers for Expense Items?
    Note: only we are unchicking the Inventory Asset Value, other then this we are enabled all attributes just which are applicable for asset items (Ex: stockable, transactable, reservable..ect...
    If it is not possible to transact such exp items,can any let me know what could be the reason..
    Regards,
    Kv.

    Hi Kevin,
    I'm not sure whether you already got the answer for your issue.
    If you are still looking for answer then, can you check the following:
    - The INV org in which you have entered the serial number generation details (Prefix, starting serial no etc) for the item is same as the receiving org for PO receipt
    - While doing PO receipt the "Destination Type" is Inventory
    Material status control functionality for Lot and Serial is not new in R12. It is also available in 11.5.10. However your issue is not linked to Material Status for Serial.
    The default Serial status is 'Active' To define additional material statuses to be used in INV you need to use WMS responsibility even if you are not using WMS.
    Thanks
    -Supro

  • Hide "more" button in a list view, only works for first item in the list

    I have the following code in a list view that outputs several dozen items in a web app.  The code only works for the first item, how can I make it loop through and execute the test for each item in the list view?  The {tag_hide more button} is a checkmark field that yields a numeric 1" if checked otherwise yields a numeric "0".
    <div id="more-option">
            <p class="right"><a href="{tag_itemurl_nolink}" class="btn btn-small btn-very-subtle">More &rarr;</a></p>
          </div>
          <div class="more-selection" style="display: none;">{tag_hide more button}</div>
          <script>
    if ($(".more-selection").text() == "1") {
        $("#more-option").hide();
    </script>

    What's the URL for the site where you are using this?  Offhand, it looks like it should work with your first example so you are either placing the script before those elements are loaded or you might try wrapping your current javascript inside the:
    $(document).ready(function() {
    --- your existing javascript here
    This make sure the code runs once all the html is loaded on the page.  Without seeing a URL and debugging with the js console in Chrome I can't give you a solid answer.
    But, I do know that you can probably do this with a lot less markup.  Once we figure out what the actual problem is I have a better solution mocked up for you on jsfiddle.
    When looking at my HTML code on jsfiddle, please realize I setup some dummy HTML and removed your tags and added actual values which would be output by your tags.  The main thing I did was remove the whole div.more-selection and instead, added a "data-is-selected" attribute on your div.more-option element.  Then, in my javascript for each div.my-option element on the page, we loop through them, find the value of that data attribute and hide that div if it's less than 1 (or 0).
    Here's the fiddle for you to look at:  http://jsfiddle.net/thetrickster/Mfmdu/
    You'll see in the end result that only two divs show up, both of those divs have data-is-selected="1".
    You can try pasting the javascript code near the closing </body> tag on your page and make sure to wrap my js inside a <script> tag, obviously.  My way is neater on the markup side.  If you can't get it to work it's likely a jquery conflict issue.  My version is using the $(document).ready() method to make sure all the code is loaded before it runs.
    Best,
    Chris

  • Multiple free goods for one item in standalone CRM

    Hi Gurus,
    We are trying to implement multiple free goods for one item in standalone CRM.
    As per SAP.help.com, it says that we can configure multiple free goods scenario in standalone CRM system.
    We tried to set up this in our system.  Basically we want to implement the scenario, where a user wants to  purchase item A, he should get a prompt for choosing between two free goods  B and C.
    We did the relevant IMG settings required for Free goods at  IMG ->CRM -> Basic Functions -> Free Goods.-> Set up Free Goods
    We also did the relevant item category determination where we have made an entry with
    Item Usage = " Free Goods" , Main item cat. = "TAN' , Item Category = "TANN".
    Now we went to create condition records in the path  "SAP Menu -> Master Data -> Prices and Conditions -> SAPCND/GCM - Maintain condition"
    We chose Application ="PRT", MaintenanceGrp="PRT_FGOODS", Maintenance context ="GCM"
    Then while creating conditon records , when I try to create two condition records where the Main Product is same but free good product is different, the system is not allowing to save these two condition records.
    it is giving error "Overlapping validity periods for two condition records".
    Please advice, if i am missing something. Thanks in advance for your help.
    thanks,
    Randhir
    Edited by: Randhir Soni on Feb 8, 2010 8:12 AM

    Constraints in free goods in R3 taken from SAP library
    Free goods can only be supported on a 1:1 ratio. This means that an order item can lead to a free goods item. Agreements in the following form are not supported: u2018With material 1, material 2 and material 3 are free of chargeu2018 or u2018If material 1 and material 2 are ordered at the same time, then material 3 is free of chargeu2018.
    Free goods are not supported in combinations with material structures (for example, product selection, BOM, variants with BOM explosion).
    Free goods are only supported for sales orders with document category C (for example, not quotations).
    Free goods are not supported for deliveries without reference to a sales order.
    Free goods cannot be used in make-to-order production, third-party order processing and scheduling agreements.
    If you defined a free goods for variants in a generic article (only SAP Retail), you can only process the variants in the purchase order and goods receipt individually (as single articles). In other words, you cannot process them using the generic article matrix.
    This answers your qn Not possible in R3
    If you are on Retail scenario this is possible thro bonus buy schemes
    But a lot of customizations needs to be done and you need a retail server to do that
    Regards
    Raja

Maybe you are looking for