Quality Management (Laboratory Information Management system LIMS)

hi,
Can anyone give me details about Laboratory Informatio System Management in Q.M?
If possibl send me link too.
Thanks & Regards,
Karthikeyan

Hi
please check this link.
http://help.sap.com/saphelp_47x200/helpdata/en/26/b43927506511d182c20000e829fbfe/content.htm
for detail help you ca find in help.sap.com
regards
Srinivas

Similar Messages

Integration of Quality Management Systems ES bundle

I need to implement QM-IDI, so started reading about it, which uses RFC destinations. Then stumbled upon on QM-IDI based on ES Bundle.
Can someone please guide me how to proceed in terms of ES Bundle.
What is a ES Bundle? Is it just set of standard webservices?
Do I need CE 7.1? What are the prequistes.
Can I levearage it on ECC6, with no netweaver?
Where to start? Do i need to download anything from Service market place?
Please help.
Thanks

Did not receive any answer

Quality Management Scoring

Hi All,
Can anybody explain me how the system calculates Quality score (which gets reflected in Vendor Evaluation)?.....any formula or principles etc
Is there any configuration setting the QM side which helps in controlling that score?
Requirment - It is intended that one critical defect should not be easily overcome by success on other less critical tests. Currently, it has been set in QM as such the quality score is getting 80 irrespective of pass or fail of many tests
Thanks

Hello,
The score *Goods Receipt (main criterion quality)* is calculated as follows:
1.     If a material is subject to incoming inspection, part of the delivered material is checked by the quality assurance department when goods are received against a purchase order.
2.     An inspection lot is created. After the inspection or testing, the person responsible in Quality Management then enters a result and makes a decision as to whether the material can be used.
3.     All the incoming inspection lots are stored in a file with their scores.
4.     When you run an automatic re-evaluation for a vendor, the system selects all the incoming inspection lots for the vendor that lie within the validity period and calculates the average of the scores.
The result is the vendor's score for the quality of goods received.
The *Quality Audit (Main Criterion "Quality")* score is calculated as follows:
A quality audit has taken place in one of your vendor's plants. This means that either your own company has carried out a check to determine how the vendor ensures that his products are of a high quality, or the vendor has carried out the audit himself.
1.     An audit lot is created by Quality Management. When the audit has been completed, the person responsible determines a score for this audit lot.
2.     All the audit lots are stored in a file with their scores.
3.     When you run an automatic re-evaluation of a vendor, the system selects all the audit lots for the vendor within the validity period.
4.     The parameter Quality audit is read from Customizing.
5.     If the indicator is set, the system calculates the average score for all the quality audits in the validity period. The result is the vendor's score for the quality audit.
If the indicator is not set, only the most recent audit lot is included. This then represents the vendor's score for the subcriterion.
The Evaln. QM system field on the screen for the main criterion "Quality" shows you the score that was awarded to the Quality Management system (e.g. ISO 9003 with certificate) used by the vendor. It is only displayed if the Prev. QM system field is filled in the vendor master record. The score is awarded by the QM system and is for information purposes only. Display the vendor master record to see which quality system the vendor uses. You can use the content of the field for your own program and have this score included in the vendoru2019s quality score.
Complaints/Rejection Level (Main Criterion "Quality")
The score for the subcriterion Complaints/Rejection Level is computed by the SAP component QM Quality Management and passed on to the MM Vendor Evaluation component.
If the scale for the key quality data in the QM system does correspond to the scoring range in Vendor Evaluation, the Vendor Evaluation system converts the QM data for use in the Vendor Evaluation scoring system.
The score is calculated as follows:
9.     On the shop-floor, material A supplied by vendor ACME is being processed in the course of production.
10.     If the material is OK (that is to say, no quality notifications have been entered for material A during the entire validity period), the vendor is awarded the highest score for the material (100 points).
11.     If the material is found to be defective, a quality notification (such as a rejection note or nonconformance complaint sent to the vendor) is entered.
12.     During the vendor evaluation process, the system checks whether the costs associated with the faulty delivery exceed the maximum percentage of business volume defined in the Customizing system.
In the above example, your business volume with (value of purchases from) ACME amounts to one million dollars annually. The costs associated with defective deliveries may not exceed 0.1 percent of business volume, i.e. $100,000. The costs associated with a quality notification are estimated at $500.
13.     If the costs that your company incurs as a result of the faulty materials are lower than the defined proportion of business volume, the system calculates a score between 1 and 99 points.
To do this, the system multiplies your annual business volume with the vendor ($1,000,000) by the parameter Business volume share (0.1).
The number of accumulated quality notifications (10 in all) multiplied by the cost of each notification ($ 500) is subtracted from this.
The result is divided by the annual business volume multiplied by the proportion of business volume.
The result of this is a factor which, multiplied by a hundred, gives a percentage.
This percentage indicates the quality provided by the vendor in relation to the particular material. The value 95% in the above example means that complaints or rejections involving the vendor ACME only resulted in 5% of the maximum costs allowed, i.e. the quality is very good.
Note on Scoring Range and Conversion QM - MM:
Since the minimum points score that can be obtained is not 0 (0 means "not evaluated") but 1, only 99 points are available in the range 1 to 100.
This is why the system works out how many points out of 99 the value 95% corresponds to.
The result is 94 points.
Since the bottom of the scoring range has been moved up by one point (1 point is the worst score not 0), the system adds on 1 point.
ACME therefore achieves a score of 95 points for the subcriterion Complaints/Rejection Level for material A.
14.     If the cost of defective or non-conforming deliveries exceeds the share of business volume defined in Customizing (in this case $100,000), the vendor is awarded the lowest score (1 point).
The score for the subcriterion Complaints/Rejection Level is computed by the SAP component QM Quality Management and passed on to the MM Vendor Evaluation component.
You can find this information in help.sap.com
I hope it helps!
Best Regards,
Arminda Jack

Quality Management - Removing old agents

Hi all,
Having an issue with Quality Management. Is it possible to remove to remove an agent that is no longer active from the Quality Management system? I notice that the admin docs for QM say that once an agent has been configured they can't be removed, just unlicenced. The problem we have is the reports in Quality Management Desktop still list this agent. The agent in question has been removed everywhere else in the system (CUCM, UCCX etc) but is still appearing in QM. Is this the expected behavior, or are we doomed to have an ever increasing list of inactive agents?
Thanks in advance,
Jason

Hi
Well - the recordings are uploaded on a schedule, yes... the schedule basically says 'at off peak hours, that I have defined, upload at a high rate', and 'during peak hours that I have defined, upload at a limited number of recordings per hour'.
There's no guarantee that the upload won't overload your agents' web connection while it is uploading, even though there will be fewer uploads per hour.
In theory you could disable in-hours uploading and rely on out-of-hours/off peak times to get the recordings uploaded. However it would be difficult to enforce that people at home will leave their PCs running and connected in the evening to upload the recordings.
In terms of support; the manual for 2.7 suggests VPN software clients are not supported:
Remote Agent RequirementsAgents who do not work onsite are supported in these situations:■They connect to the network via a Cisco 831 or 871 router and use a supported IP phone.
In previous versions (pre 2.6), IP Communictor was not supported for remote workers.
Finally, if you do go down this route there are no guarantees that you will get good service/voice quality. You will probably be at the mercy of as many different ISPs as agents, and that's not a position I'd want to be in as either you or one of your contact center customers...
Regards
Aaron
Please rate helpful posts...

QUALITY MANAGEMENT INFORMATION SYSTEM

hello guru
kindly explain what is quality management information system.
i will be really thankful if u can send me the detail step by step procedure along with t codes
thank u
[email protected]

NITHIYASEELAN ,
QMIS is basically deals with kind/types/ of data updation that takes place in the system
Pls go through these links for detailed understanding
http://help.sap.com/erp2005_ehp_02/helpdata/en/8c/fd5872a94711d1890a0000e8322f70/frameset.htm
Reward points if useful
Regards,
SVP

All Information regarding Change and Transport management System in SAP

Hello Experts,
Iam into Basis . I need all information ,fundamentals and concepts over Change and Transport management system in SAP .Its fundamentals,the way it works ,how requests r transporteded etc. I want more of this information in regards to practical scenario. Plz dont provide help link as iam aware of that. I need good explanatory content ,in your own words shall be appreciated more. If any body has any self prepared good explanatory and procedural matter , tat will be of help.requested to revert at earliest as this is a bit urgent. My Email Id is [email protected]
Useful answers shall be rewarded points.
Thanks and Regards,
Somya

check this link
http://help.sap.com/saphelp_47x200/helpdata/en/d7/8eb9361a75ea43e10000009b38f839/frameset.htm

Information on Document Management System in WebLogic 8.1

Ajay Bharadwaj wrote:
>
Charles Thanks a Lot for your reply but that link does not seem to work.
AJAY
"Charles Paclat" <[email protected]> wrote:
Ajay,
The document management software is part of the WebLogic Platform 8.1
and in
particular the WebLogic Portal. The online documentation for the portal
is
here:
http://edocs/wlp/docs81/index.html
Should be
http://edocs.bea.com/wlp/docs81/index.html
>>
I will cross post this email to that newsgroup as those folks are more
likely to have specific answers to your questions.
"Ajay Bharadwaj" <[email protected]> wrote in message
news:3f4ee2b1$[email protected]..
Hi
I want to get information on Document Management System in WebLogic8.1.
If some link can be provided which says about the topic from veryscratch
or
an e-book then i would be highly delighted.
Thanks
AJAY

Load Balancer Host Information for Livecache Managed system

We are configuring the managed system for Livecache. Should we need to enter the Load balancer Host & port information on the managed system configuration?
I read through some forums & this is maintained for ABAP /Java stack & the information is pulled from SMICM.
Please advise.

Give your SCM system details
Refer http://service.sap.com/sap/support/notes/695721

Installing data quality management for sap for multiple sap system

Hello folks,
I have an Requirement where i need to install data quality management for sap in multiple sap system.
I have installed it successfully for one system .
here my data services is installed in one server with rfc server as windows services in same server.
i have done the required configuration in ecc side.
my question is how do i use same data services jobs which are configured as real time services for both my sap connection?
in simple terms how do i installed dqm for multiple sap system having single data services server.
thanks,
Shubhangi.

Hi Vishal,
Regarding DQM Please refer the below Link.
Links:
http://scn.sap.com/community/data-services/blog/2013/07/18/i-installed-dqm-for-sap-you-can-too
or you can also refer below SNotes given by SAP:
1732816 - How to manually import DQM ATL files correctly after failed install
Note 1732816 - DQM Adapter Dataflow installer fails on Data Services 4.1
Links:
https://service.sap.com/sap/support/notes/1732816
Thanks,
Daya

Quality Center Adapter - Connecting Multiple Solution Manager Systems

We are running Solution Manager 7/Enhp 1 and Quality Center 10 successfully using the Quality Center Adapter integration. My question is, can we connect multiple Solution Manager systems (i.e. SMP/SMS/SMX) to a single Quality Center server simultaneously? Or is there a one-to-one relationship restriction. Thanks.

I have answered this question in this post below:
http://forums.sdn.sap.com/thread.jspa?threadID=2110531&messageID=10962875#10962875
To quote myself
Each tie up is based on the logical ports at the Solution Manager end and the relationship between the two entities is between Projects. So if you set up the configuration like you would in a normal scenario and at the right moment, connect the projects in SolMans to the corresponding projects in HPQC, you should be fine.
Hope that helps.

EAM, Quality Management, Production Planning, Laboratory Management

Is there any forum with "EAM, Quality Management, Production Planning, Laboratory Management" discussions present in Oracle Website?

Check out the SCM Process Manufacturing discussion forum which you can find off of the E-Business Suite forum level. I think that's what you're looking for.
Here's a direct link...
SCM - Process Manufacturing (OPM)

Accessing Component Information for systems connected to Solution Manager

We currently aggregate system component information for our ABAP systems through the following manual (and tedious) process:
Log into each ABAP system
Menu: System -> Status
Click Component Information button (magnifying glass icon)
Retrieve the information: Component, Release, Level, Support Package Name, Description.
Recently, we were drilling through Solution Manager Root Cause analysis -> Change reporting and noticed that this information is available for each system. In the ABAP-Software data store. This led us to consider if this information is contained within the Solution Manager BW cubes.
However when we looked at the SMD Change Analysis (thinking this would map to what we saw in the Change Analysis reporting), we didn't see this information.
So, the question is, does anyone have any thoughts were the Component information for systems is stored in Solution Manager? Ideally, we would like to tap into this source for our own custom report as opposed to retrieving it manually from each system as I described.
Thanks,
Jeff Henke

Hi Jeff,
the information about software components (and this is I think what you are looking for) is stored in the LMDB of Solution Manager. Each satellite system sends its component info into SLD (either in an external system or in Solution Manger itself). From there it is redirected to LMDB.
Try transaction LMDB in Solution Manager. There you have (depending on your SP-Stack) access to several reports to evaluate your landscape.
Best regards, Alexander

Managed system user locking because of solman_setup wrong information

Hello,
Each time I go to solman_setup -> Managed system,
there are two systems with a red point because of non
working rfc connection.
When I reconfigure them (3. connect managed system), I change the
user/password to connect to the managed system.
But our solman still connects to the managed system with the wrong
username and password.
Then the user is locked in the managed system (too many connections with a wrong password),
How could I proceed to tell solman to stop using the old username
password provided?
Regards,

Hello Beniot,
I has similar issue some time back, please have a look at below link.
RFC error in third step while performing managed system configuration
reset the password and retry, and try to check dump in both the system, solman and system which you are trying to do manage system config.
Even after this you are getting error, please paste the screen shot or attach the error.
Regards,
Haseena

Cisco Unified WFO - Call Recording and Quality Management stops recording with conferenced translator

I'm having an issue whenever one of our employee's conferences in an external translator, as soon as they bridge the customer into the call with the translator QM stops recording. I can hear the intial conversation with the customer, and then the employee put the customer on hold and call the translator service. Only when the two are bridged together the call always stops recording.
We are performing all recording on the server side, and are not using Quality Manager Desktop agents.
Any help would be much appreciated. Thanks!
-Chris

So I found the following information listed below. I don't manage the Cisco Unified CM portion of our telco system. Can we limited the ourselves to a single Codec, and would this even resolve the issue. Does this cause other issues if we didn't limit the devices that are recording to a single codec?
Recording IssuesThis topic explains how to diagnose and resolve problems that occur with contact
recordings.
Calls for devices configured for Network Recording drop when you try to conference
or transfer a call.
Symptom. When you try to transfer or conference a call and one or more devices on
the call configured for network recording, the transfer or conference fails and
parties drop off of the call.
Cause. Cisco Unified CM does not support codec changes for devices that are
configured for call recording. The codec must remain the same throughout the life
of the call. For conference calls, the conference bridge must support the codec
used before the conference completes.
Solution. Update the Cisco Unified CM configuration to ensure that no codec
changes occur for network recorded devices.

Document Management systems

Looking for Document Management system to replace GW
Is this a Fair analysis...
No improvements in GW8... (Sadly GroupWise is going nowhere fast specially
when it comes to DM).
Users want more functionality - access the email archiving (not the joke
archives), PDF support, Library from the Web etc.
Since we are going to have to move from Netware soon - I guess Windows is
the way to go (looking at the dead SmallBusiness Nows-SBE2 forum - Novel
doen't have a credible Small Business solution or the will power)
What other Document Management systems exist?
I've come across things like KnowledgeTree but don't have any experience of
it.
I guess others who have moved from GW DM have already left the Novell forums
but I'm looking for someone who has had to move to a better (or another)
Document Management system.

For more detail about system price and modules contact us at
[email protected]
[email protected]
[email protected]
www.vt3soft.com
Cram Easy: Collaboration Knowledge Management System
Document Management System
What is document management system?
The capture and management of documents within an organization. A DMS includes Web access to support occasional users and work from remote sites as well as a secure document storage area (vault). Additionally a DMS includes search and retrieval, versioning, and content caching.
Benifit of using Document Management System
* Reduced paper storage - removal of paper by converting paper documents that are stored within the business or in an archive into an electronic form
* Improved retrieval time - obtaining paper from storage or an archive is typically slower than electronic retrieval of documentation. Along with the improved retrieval time comes the ability to perform searches for similar information. This is especially useful when trying to perform major changes or perhaps searching for information subject to litigation
* Saves paper, printer and toner costs - reduced need to print paper documents as electronic versions are available for use or reuse. Whilst the paperless office is still not a reality, it is anticipated that the availability of an DMS would reduce the need for multiple paper copies of documents. If the DMS does not have an electronic signature capability then at least one "master" paper signed document will need to be printed
* Improved staff productivity - less time spent searching for documents or trying to find the current version. Faster document review and approval cycles, particularly where multiple reviewers and approvers are involved in the business process
* Improved disaster recovery - DMS contains business critical documents and has its own disaster recovery plan that allows the documents to be restored in the event of significant disruption or disaster for the business
* Improved security through a single secure location for documents and ensuring that the right people are able to access the right documents
* Improved compliance with regulation or legislation
* Central control and management of documentation
* Reduced chance of "losing" documents
* Enhanced competitive situation due to improved internal document processes
* Improved customer service through faster access to and retrieval of important customer information
CramEasy Document Management System
Centralize storage
CramEasy provide central place to store all type of documents.
Tagging and categorization
CramEasy provide tagging to each document which help people to categories document [example: purchase bills] tagging help people to search and retrieve same kind of document using tag, Help people to identify type of document. CramEasy provide category management which provide user to add document to specific department/group which benefit organization people to organize and find specific department or groups document
Collaboration and Sharing
CramEasy provide very flexible document sharing facility. User can share his/her document with group/category/individual user with edit, delete, view access permission.[example: use A can add new document doc_123.doc ,he/she can share same document with group xyz with view permission, share with xyz user with edit permission and block user zyx from view.]
Locking
CramEasy provide lock facility. Which allow user to lock document when he/she is working on, same time no another user can edit same document until document be unload by use who locked it. This feature provides great facility to organization people to work on same document.
Full Text Search
CramEasy provide power full and faster search facility to organization user by which user can retrieve any document with in second. User can search using keyword, Date as well category which separate same document of different department and provide exact match to user.
Discussion
CramEasy provide unique facility of discussion which allows organization people to start discussion on individual document.
Auditing and History
CramEasy Provide audit and history facility to organization people, which provide organization users to check who has edit/work/add individual document.
Ratting
Organization people can rate individual document. Which help users to get feedback about document, help organization to produce high quality document.
Metadata
CramEasy DMS provide Metadata is typically stored for each document. include the date the document was stored and the identity of the user storing it. Also extract metadata from the document automatically or prompt the user to add metadata.
Try free Document Management system at Cram Easy: Collaboration Knowledge Management System or www.vt3soft.com
Contact Us
[email protected]
[email protected]
[email protected]
www.vt3soft.com
Cram Easy: Collaboration Knowledge Management System

Quality Management (Laboratory Information Management system LIMS)

Similar Messages

Maybe you are looking for