Quantity at storage location

It must be simple, but we just can't find the BAPI call to get the current quantity on hand for a particular material in a specified storage location in MM. Does someone know the call?
Thanks.

Oh...never used .net connector.....just jCo. I'm assuming that they are pretty much the same, so my suggestion, if .net can not handle it, is to create your own RFC enabled function module with your import parameters, MATNR WERKS LGORT and exporting only the fields that you need. In the function module source, just hit table MARD with your parameters. Then just call this Function module in your .net program.
Good luck,
Rich Heilman

Similar Messages

Mandatory the Material Quantity and Storage Location Field in Order

Hi Expert,
Please advise. how can i set the Maintenance order,
If Material field is Filled
Then Mandatory the Quantity Field and Storage Location Field.
Thank You
Best Regards

Hello,
Please Use Below User Exits to get your Functionality
IWO10009 --->PM Order Check for 'Save' Event
CNEX0026--->general inspection of material
Regards,
Rakesh

Storage Location for NON valuated material in MIGO

Hi friends ,
I have created a purchase order for NON-Valuated material (UNBW) with Account Assignment "K".I did check the material type UNBW configuration where only Value Update is checked for my Plant.
Now at the time of MIGO , system is asking for Storage lcoation (mandatory) and after MIGO system also updates quantity in Storage Location entered in MIGO.
while in normal cases (like ROH material type) , if we create Account Assigned PO ( like K) , system neither ask for Storage lcoation at the time of MIGO , nor system updates Qty at any storage location.
As per my understanding , if we create Purchase Order with account assignment K , system updates value in consumption and doesn't update Qty in stock (although material is stockable) .....which is simply like immediately issue of material to cost center.
Therefore wondering why system is updating Qty for NON-VALUATED material.
Does non valuated material means , POST value to Cost center (for account assignment K) and Update Qty in stock ?
Like in case of Account Assignment , value gets charged to WBS and qty gets updated as special stock "project"
All replies are welcome .....
Regards
Shrey

By definition UNBW's are ony qty updating and have no value assoicated with them. Since the system needs to stock this qty somewhere it by deafult asks for a Sloc.

Back Date Storage location Stock / Subcontractor Stock

Dear SAP Guru (s)
Please confirm can we get back date stock at storage location with value and quantity. Also tell me how can we take one subcontractor stock at any particular date.
We are using MB5B, but it is giving only quantity at storage location level and value at plant level.
Full points if problem solved.
Regards
Ishu

Execute MB5B with special stock and O for special stock indicator, and then double click the material number, you can get all the material document NO.

Using BAPI_MATERIAL_AVAILABILITY for storage-location-level

Hello experts,
To determine the ATP quantity Iu2019m using the function module BAPI_MATERIAL_AVAILABILITY. I need to get the ATP quantity on storage-location-level; for this the following parameters are set:
- PLANT
- MATERIAL
- UNIT
- CHECK_RULE
- STGE_LOC
The result in table WMDVEX is for different storages locations the same, but in transaction CO09 I have different quantities for the storage locations.
How can I determine the ATP quantity on storage-location-level?
Thank you for your hint.
Regards,
Kurt.

Hallo Brad Bohn,
thank you for your suggestion.
Iu2019m using an own rule (as copy of rule A), the own rule donu2019t use purchase orders.
In CO09 I have the following ATP Quanties:
09.09.2009     BStand          1,775     0     259
09.09.2009     LgBest     0001     785     0     459
09.09.2009     LgBest     0002     989     0     452
09.09.2009     LgBest     0003     22     0     20
The function module provides only 259 for each storage location.
There is another function module AVAILABILITY_CHECK. Can this function module also be used to determine ATP quantity?
Thank you & best regards,
Kurt.

Report including open purchase order quantity for one storage location

Hello gurus,
I am looking for a report giving me the total/available stock and the open purchase order quantity for all materials stored in a certain storage location.
I.e. like this:
Plant 0001, storage loc. 01
Material stock open purchase order quantity
100000 200 pcs. 50pcs.
Is there such a report in SAP standard?
Thanks
Alicia

hI
U want the report like this ,
MAterial stock availablein storage location and with Open PO quantity for the same material.???
This report u can get in 2 different transaction . the n u can combine and create one custom transaction .
One is for materil stock in storage location is MB52 or MB5B
THen ME2N for open PO quantity for that material.

Storage location quantity ABAP report question

hi experts,
i want to write a report which can show all the quantitiy base on storage location and i have four questions ....
1 . has somebody can tell me where i can find the confirmed qty ? is it in VBEP-BMENG ?
2 . how to know one material in one storage location's available quantity and confirmed quantity and received quantity ?
3 . has somebody can tell me where i can find the soft commit & hard commit qty fields ?
4 . is the field in table MARD named UMLME[Stock in transfer (from one storage location to another)] for transfer in or out ?
Many thanks !
Carlos Zhang

Solved !

All quantity base on storage location.... 4 questions...

hi experts,
i want to write a report which can show all the quantitiy base on storage location and i have four questions ....
1 . has somebody can tell me where i can find the confirmed qty ? is it in VBEP-BMENG ?
2 . how to know one material in one storage location's available quantity and confirmed quantity and received quantity ?
3 . has somebody can tell me where i can find the soft commit & hard commit qty fields ?
4 . is the field in table MARD named UMLME[Stock in transfer (from one storage location to another)] for transfer in or out ?
Many thanks !
Carlos Zhang

everything you can do it thro' query.SVQ1.please search in this forum.you will get more detail on query.here you can link 2/3 tables and make your own report.
regards
venkadesh

Storage location Quantity

Dear gurus,
Here is my requirement.
1. I need to get quantity available in particular storage location and it should also consider Open blocked quantity (Sales orders raised for this material for this particular storage location,Delivery docs)
2. I dont have to produce any Delivery dates
Is there anyway i can do that?
Thank you
ANil

hi,
pl go MMBE, enter the storage loc data. in the next screen go to ENVIRONMENT in the menu bar u wl get so many analysis
cheers

Auto-copy putaway quantity in Inbound for Non-WMS storage location

Dear All SAP Gurus,
I need to create an inbound delivery document for non-WM managed storage location and "copy" the quantity into the "putaway quantity" field automatically. Is there any setting to do this automatic assignment? As far as I know, if the storage location is non-WM managed, we usually need to manually enter the putaway quantity as part of the verification process during the PGR (goods receipt).
Please help.
Thank you and appreciated for your efforts.
Best Regards,
Edwin

Dear All,
Before this, I can't find any similar topic posted before, perhaps I was using an incorrect/not-so-meaningful keywords (although I've tried a lot of keywords). However, I've finally found the same topic in the following link. Anyone who is interested, may proceed to the following link.
Re: Regarding Automatic Picking Setting in Deliveries
Regards,
Edwin Fu

Ordered quantity in 2 storage locations

Hi,
I have material M1 of 100 pieces stored in 2 storage locations say( SL1=50,SL2=50) in 1 plant.
Now i create an order fo 80 pieces. quantity is getting confirmed and order is saved.
Now VL01n- storage location is entered manually and so the pick quantity.
How do you process such order. what needs to be done in the delivery document.
partial delivery is allowed.

Hi Lakshmipati,
if the storage location is determined automatically in delivery document then though i have 70 pieces of stock in plant only 50 will be confirmed and it wont use the stock in second storage location. so for the order to be complete i have to maintain the stock in SL1.
SO I want to know how to process a sales order with 70 quantity and which is maintained in 2 storage locaion(sl1=50,sl2=20)
what i tried to do is in delivery document i changed the deliver qunatity to 50 and picked that stock from sl1 location and done pgi
and again with reference to same order i created a delivery again and now the delivey quantity is shown as 20 so picked that 20 from sl2 location
i want to know if this is a standard process .

Quantity not updating in storage location

Dear one and all,
For a Sales order and Delivery order , System has not reduced the entire qty from a storage location after making the invoice. System reduced only part qty. The balance qty is still remaining in the storage location.
Plz guide what all needs to be checked.
Thanks & regards
Sharad

Dear GSL & Lakshmipati,
Thanks for ur responses.
One last question -
I have an order wherein there are some physical items:
- they are not value/text/service items
- item cat/sch line cat automatically determined
- sch line cat is relevant for deliv but not for MRP (no movement type defined) in customization
- there Goods Movement Status is showing as complete (C) in Delivery
- there doc flow is showing as "confirmation of service"
- all the items are completely delivered & invoiced
- no batch split is occuring
How will you keep track of such items (in storage loc.)? Why would you have such items?
Thanks & regards
Sharad

Picking quantity from a different storage location during batch split??

Hi Gurus,
Have an issue with doing batch split in a delivery with batches from several storage locations.
Have delivery XXXXXX where I want to pick batches from several different storage locations.
I click on the batch split button and select the different batches and quantitys.
The issue here is that I would like to have the different storage locations entered automatically based on the selection of the batch I have made.
The only storage location that is entered here or possible to be entered is the defaulted storage location that is in the first screen...
My question is why can I get the storage location where the batch is located and acctually exists when I do select the batch in the batch split...
The table LIPS and LGORT is not filed with the storage location so I do not know how I could fill this field with the correct storage location data...
Thank You for all Your help!
BR,
Christian

Hi Christian,
you have not jet got an answer -- here my suggestion.
You have to use the Userexit Mv50afz1. Here you can do some checks and you can do a popup, where you can sign the LGORT, where the batch is.
In any case, you need an ABAPer
In documentation, there is signed, that you should not change database other as Save_prepare - and that's too late.
In one solution at my company, i show in a message the right information. In an other solution, i made a modification of table lips.
But dont change the index of the current lips/xlips. That may have the effect of incorrest LIS - System.
If nessesary create an ylips- Line of the position.
Use an assign-command to avoid the change of the index.
hans

Date Wise and Storage Location Wise Stock Qty & Value Report......

Hi Experts,
We want a report Date Wise(As on 31.03.2008) and Storage Location Wise Quantity & Value Report for only Finish Materials. Is there any report ?
From Mb5b we canot get storage location wise report as we get only plant level qty and value.
Pl. guide us.
Regards,
Yusuf

Hi Yusuf,
Try the Tcode: MC.9 there enter the site and article and executeYou will get details of the article
stock, value. if you double click the article you will get the details of storage location.
Hope it will be help for you
Regards
GK

Stock report in BW (valuated stock and Storage Location level)

Dear All,
            Regards.We got an situation here,
Case 1: R3 (MB5B) (Both "Storage loc" and "Valuated stock" shows the same Stock Qty)
1).The BW Stock Report shows values the Correct Values for "Receipt Qty" and "Issue Qty" with the Correct "Quantity total Stock" aswell.
Case 2 :   R3 (MB5B) (Stock is different between "Storage Loc" and "Valuated Stock")
1).The BW Stock Report shows the "Quantity Total Stock according to VALUATED STOCK Level(MB5B),but the "Receipt Qty" and "Issue Qty" according to STORAGE LOCATION Level(MB5B) .
We followed the "How to Handle Inventory "Doc with the proper sequence of Loading of Infosources and Compression.The data is sitting fine at the cube level.
It would be great if someone can throw some Light on this issue,on how the Query shows a COMBO of both Valuated stock and Storage Location stock....Held up with this issue for quite sometime..Had a look at the   Oss Note (589024)...........
Manythanks
Arun

HI,
In Inventory we have two quantity fields given to satisfy the requirement.
Valuated stock Qty - 0VALSTCKQTY
Storage Location qty - 0TOTALSTCK
You can make use of them based on your requirement. Hope this helps for you.
Thanks,
Arun

Quantity at storage location

Similar Messages

Maybe you are looking for