Auto-copy putaway quantity in Inbound for Non-WMS storage location

Dear All SAP Gurus,
I need to create an inbound delivery document for non-WM managed storage location and "copy" the quantity into the "putaway quantity" field automatically. Is there any setting to do this automatic assignment? As far as I know, if the storage location is non-WM managed, we usually need to manually enter the putaway quantity as part of the verification process during the PGR (goods receipt).
Please help.
Thank you and appreciated for your efforts.
Best Regards,
Edwin

Dear All,
Before this, I can't find any similar topic posted before, perhaps I was using an incorrect/not-so-meaningful keywords (although I've tried a lot of keywords). However, I've finally found the same topic in the following link. Anyone who is interested, may proceed to the following link.
Re: Regarding Automatic Picking Setting in Deliveries
Regards,
Edwin Fu

Similar Messages

Help required !! For MRP at Storage location level

Hi ,
we need to have separate MRP fro two storage locations with direct procurement from Storage locations. Right now we have MRP run at Plant level for all the storage locations. we donot want the materials in these two storage locations to be planned at Plant level only with Separate storage locations. Plant level MRP will run for the other storage locations .
I have created separate MRP areas for the storage locations & activated MRP for MRP Areas client level. material masters for the two storage locations have been asigned the MRP areas & maintained the MRP area data in material master .
When we run the MD01, the Planned orders are getting created at both MRP areas plus at the Plant level.we donot want the planned orders creation at Plant MRP area level-only at the storage location level for those two storage locations MRP areas.
Can anybody guide me -how to achieve that ? Did we miss any configuration?
I tried to maintain scope of planning & getting error for parallel processing .
Do i need to maintain parallel procesing with servers ?
Pls need your input on this. Any help will be highly appreciated .
Thank you in advance.
Regards,
Krish.

Hi Krish,
Go to following IMG path and check out your settings -
IMG>>>Production>>>MRP>>>Master Data>>>>MRP Areas>>>
(1) Activate MRP for MRP Areas -
Is that activated?
(2)Define MRP areas>>>> Do setting s as per Storage Location
Then run MRP.
MRP Areas
In this IMG activity you define whether MRP is to be carried out with MRP areas. In addition, you define the MRP areas for each plant in which you would like to carry out this type of materials requirements planning.
The MRP area represents an organizational unit which carries out materials requirements planning independently. The results of the planning run are displayed specifically for each MRP area. An MRP area can include one or several storage locations of a plant or stock with a subcontractor.
You can assign a material to various MRP areas.
Basically, there are three types of MRP areas:
Plant MRP Area
Initially, the plant MRP area includes the plant with all its storage locations and stock with subcontractors. When you have defined MRP areas for storage locations and for subcontractors and you have assigned the materials, the plant MRP area is reduced by exactly this number of subcontractors and storage locations, as they are now to be planned separately.
MRP Areas for Storage Locations
You can define an MRP area that consists of a particular storage location by creating an MRP area and assigning the storage location to it. Material requirements for this storage location are then planned separately from the rest of the plant. You can also group several storage locations into one MRP area by creating an MRP area and assigning the storage locations. These storage locations are then planned together.
MRP Areas for Subcontractors
You can also define an MRP area for each subcontractor. Using an MRP area, it is possible to plan the components to be provided in subcontracting, by defining an MRP area for each subcontractor and assigning the components to be provided. You can therefore plan the requirements to be provided for these components for one subcontractor separately from the usual requirements.
Up to now, MRP at plant level had been carried out. The various requirements were combined in the planning run and procurement elements were created for these pegged requirements with unknown sources.
The introduction of MRP areas enables you to carry out material requirements planning and know the source of the pegged requirements and to be able to distinguish between them. The source of the pegged requirements can be, for example, production on a particular assembly line or a subcontract order.
Material requirements planning for each MRP area allows you to have specific control over the staging and procurement of important in-house production parts and purchased parts for each shop floor and assembly area.
Hope this will give you more idea about the same.
Satish

Multiple physical inventory document active for same material-storage locat

hi experts,
I am using transaction code MI31 for creating physical inventory document for all materials at a particular warehouse(storage location). User is selecting direct generation of of PI documents in the transaction. If by mistake he presses execute button more than once system is creating as many copies of physical inventory documents. As per ERP system logic it sound very wrong to have multiple physical inventory document active for same material-storage location ( no batches or special stocks exist ).
Is there a message number or some standard setting to prevent such occurrence.
regards
Avinash

Hi,
Syetem won't create again physical inventory document, if allready PI is active for the same part number, plant, storage location & batch/valuation type.
Check your PI documnets
Regrads
KRK

HUs in OD - at a non-HU storage location

On creating HU in OD, the OD are created at non-HU storage location, this is a problem creating subsequent ID on the same.
Any idea ??

Hi Lokesh.
First pack the product as you want in pack storage type and then move the HU to HU storage type.
Step 1 >>/scwm/adhoc to move mat to pack storage type.
step 2 >> pack the product in HU
step 3>> move HU to HU req storage type = /scwm/adhu.
Regards
Suraj

Stop billing(sales) for a particular storage location.

Dear experts,
How can we stop billing to the customers completely for a particular storage location.
please suggest...
thanks in advance.
Regards

Hi,
This can be achieved by restricting the authorisation for that particular Sloc in VF01 which restricts from billing w r t that particular sloc.
Thanks

Trx for opening a storage location.

Hi,
is there a trx for opening multiple storage locations for the same material
<b>instead of setting "Create Storage Location Automatically"</b> in SPRO?
Best regards

U can extend a material to number of storage location by using tcode MMSC.
OR u can use create sloc automatically during first GR

PO Partial confirmation Quantity not updated for non-catalog items in SRM

Hi Experts,
Partial Confirmation plus Partial Rejection from Ariba(Suppliers network) could not be processed.
Steps to Reproduce:
1) Create a purchase order.
2) Confirm some part of the quauntity and reject the balance part in Ariba.
3) Open the link in SRM and click Copy push button.
4) Click on Process PO and check PO, the PO is not updated with the changes done in Ariba
Expected Result:
PO should update the changes done in Ariba.
Here when part quantity is confirmed and part is rejected at Ariba, its sending a POR but SRM is not updating anything for non-catalog items when POR is copied onto PO.But where as in the Catalog items partially confirmed POR is copied onto PO.
kindly give your valuable inputs to poceed furthur.
Regards,
Chandu

Hi,
I'm not clear you issue. Is it SC -> PR(backend) -> PO(backend) classic scenario ? or You just created a PO in backend system?
BBP_GET_STATUS_2 will update SC follow-on doc information from backend.
Regards,
Masa

Putaway quantity does not show in Interim Storage Type 916

Hi all,
It could be a silly quesiton however would need your help with the issue below.
When I create Picking TO from Outbound Delivery, usually I will see the Pick Quantity from Source Storage Bin and Putaway Quantity showed in Interim Storage Type 916. However, for the warehouse I'm working on I could not see the Putaway Quantity showing in Sty 916, only Picking Quantity displayed from source storage bin.
For example, I created picking TO# 17439 to pick stock from storage type 001 to destination storage type 916. Here I only see the 'Pick Quantity' showing in storage type 001. I don't see 'Putaway Quantity' shows in Storage Type 916.
Would appreciate if anyone can provide some advices. Thanks.
Khanh Ngo

Hi Jurgen, I have cancelled the TO above for some other tests. I have created a new delivery, please see the new TO#17442 with LT21:

IDOC inbound: delivery confirm - set storage location at position

Hi all,
I have the issue to set with an inbound IDOC for shipping confirmation the storage location on item level. We are working with an external logistic provider so the final storage location where the goods are taken from is not not at creation time of the delivery. We have two possible storage locations.
EDI message type SDPICK cannot be used, there is no place for the storage location information LGORT.
So we tried SHPCON with process code DELV. FM: IDOC_INPUT_DELVRY
The field is in the IDOC type DELVRY03 but it is not used.
Do you have any idea how we could set the storage location on item level in the delivery with an incoming shipping / picking confirmation idoc?
Thanx a lot
regards
Hans

used a userexit in the inbound function module to get the IDOC field to the internal tables.

Creation of PO only for one particular storage location

Hi Friends
One of my material is extended to four storage location within a plant say S001 S002 S003 and S004 but here requirment is at the time of raising PO for this material,system should always propose only one particular storage location say S001. Is this possible
Need your guidance
Regards
VS

Hi supergene
system will never propose particular storage location based on material.
May be u can add particular storage location in <b>personal setting</b> so that for all PO it will be picked as default storage location.
system will propose storage location at the time of GR based on storage location maintained in Material master
Or
you can use the authorisation object M_MSEG_LGO. To restrict users from using storage location other than which they have authorised for
Vishal...

T-code for display the storage locations

Hi,
Is there any tcode where we only display the storage locations, which is not the long one by using mm03 except for mmsc which is only authorized for limited people.
Many Thanks
Jean

Hello Jean,
SE16 will work for you but you will not get material description and also you need to make settings for output (for only required field.)
The other option is , you can write a small ABAP query using MARD and MAKT (for material description, if you want) table.
Hope this helps.
Regards
Arif Mansuri

How to restrict Availability check for a particular storage location

Dear all,
As per the Business requirement, System should not consider the stock in a particular storage location.
while sales order creation, system should not confirm the requested delivery date based on the stock available in that particular storage location.
How could we map this requirement in SAP, Please educate me to resolve this issue. Your suggestions will be highly appreciated.
Thank you,
Raghu Ram.

Dear Lakshmipati,
as you said correctly this storage location is there in MMSC for the article which we are using in Sales Order.
I have tried to delete this storage location but system is not allowing to do so.
I could not understand, from where this storage location is being determined. we have not mentioned any where in article master data.
please help us to resolve this issue, and thanks for your help in advance.
thank you
Raghu Ram

How to Block postings for WM managed storage location

Hi Experts,
The scenario is we want to block posting for all materials for a WM managed sloc. We cannot use Authorisation management due to some limitations. Please suggest any other way to do this.
Thanks

Thanks for your responses.
We are looking for an option where we do not have to do any configuration changes and flag for deletion or archive is not an option for us because it is just a temporary requirement. Moreover there are some technical limitations due to complexities in ALE so we cannot use MM06. Any other ways that anybody can think of?
Thanks

Not getting any Data for Batch and storage Location for 2LIS_03_UM

Hi All,
My requirement is to extract Data from 2lis_13_vdkon from R/3 source system.
currently we are on R/3 PI 2003_1_470, For 2lis_13_vdkon we need to upgrade to PlugIn 2004_1.
we are planning to upgraded to Solution Tool 2008-1, will that be helpful or we need to upgrade to PlugIn 2004_1.

http://help.sap.com/saphelp_nw70/helpdata/en/7f/0f8c4037fba62be10000000a1550b0/frameset.htm
Available from OLTP release
4.0 B
Delivery with
PlugIn 2004_1
Prerequisites
Prerequisite for the use of the extractor is the R/3 core SAP Note 673964 or the corresponding support package.
regards,
Colin

UD for a Material in HU-Storage location

Hi Gurus,
I have situation where Stock posting tab is not coming while doing the UD for a material
Process flow is below:
1. Creation/Release of Process - Inspection lot get created since early lot creation status REL CALC
2. GR of Process Order is done in MIGO in Hu storage location
3. Inbound Delivery is created (WM integration)
4. Inbound Delivery is processed with TR creation/Confirmation
5. Stock can be seen in Q under HU active storage location & Material document is created in IM . Inspection lot status is same
6. Result recording is done against Lot Status INSP RREC
7. While doing UD. Tab for Stock posting is missing. Status UD ICCO CLAS STUP
This inspection type has following settings: - tick post to insp stock, Insp with task list , early lot creation , auto UD etc
Not sure what I am missing some settings since that is HU storage location
Please guide
Thanks,
Ishwar

Hi Yogini,
Thanks for that .
I tested as per suggestion but that is also not working basically no inspection lot is getting created for the GR after completion of WM transaction
I have tested my senerio for non-HU storage location (doing GR in no-HU storage location ) & that works correctly . After UD i was able to see tab for stock posting & stock get posted successfully
I think need expert advice who has work on QM-WM integration part ... can we able to post the stock from Quality stock from HU storage location to unrestricted use using only IM transaction ( QA11/12 ) or do i need to perform some additional steps in WM ?
Thanks,
Ishwar

Auto-copy putaway quantity in Inbound for Non-WMS storage location

Similar Messages

Maybe you are looking for