Query Executed in Portal do not show entry in RSDDSTAT_DM

Hi
We are on BI 7 and I am tuning one query.The User has complained that in BEX it doesn't take time but in Portal it takes time.  I have created 1 Aggregate and the query is using the aggregate. This is confirmed as I have executed the query in RSRT.I can get the DB time in RSDDSTAT_DM table.
I have executed the same query Portal but the query details is not reflected in table RSDDSTAT_DM . I have to confirm that even in Portal it is using the aggregate and I need the time it takes to run the query in the portal .
Kind regards,
Yogi

This should create an entry in RSDDSTAT_DM. Try this.
1. Launch the query in the Portal
2. Add "&PROFILING=X" to the end of the URL.
3. This should provide performance information at runtime...

Similar Messages

  • Using transactio code to execute a report does not show default value

    Hi all ,
          I have given a default value of a field on my selection-screen by initialization in a hr report .
    I am using PNP database and default selction-screen in hr report category .
    While the report is working fine while executing directly , It is not showing default value when executed through a transaction code .
    Can any body tell why it is so ?
    Thanks & regards
    Sun

    Did you create the transaction as a report transaction?
    Rob

  • Scheduling the report from Infoview portal does not show up data

    "The crystal report is based on a SAP BI query. The parameters of the report are basically the parameters(SAP variables) of the SAP BI query. When we run the crystal report in the CR Report Designer tool, it runs fine showing all the data correctly. Then we published the crystal report to the Crystal Enterprise Server from the SAP BI system. Through the Infoview portal, the user clicks on the 'Schedule' link for the report and sets the parameters. When the 'Schedule' button is clicked, it runs successfully but no data is seen in the report except for the template. But under the same report, in Infoview portal, if the user selects "View" link, sets the parameters and then clicks the 'Execute' button, it runs successfully showing all correct data.
    Dont understand why it works for 'View' link but doesn't work for 'Schedule' link. Is there any setting that needs to be made for this?"
    Thanks in advance,
    Sri

    Hi Sri,
    When we are able to see the report and unable to schedule the report with in the Info view, then check with the user rights.
    Just try to login with admin account and try to schedule the report.
    Also check the report in CMC and see the preview of the report.
    If the user doesn't have enough rights to schedule the report, then  it doesn't allow it.
    Also check with in the Folder rights with in the report is saved.
    Regards,
    Naveen.

  • Calendar issue - Does not show entries previous Ja...

    Hi, 
    from beginning of January the calendar of my Lumia does not show any more entries made previously ! It was working  but from I think 7th of January nothing .. The calendar is sync with outlook.com calendar and if I go to http://calendar.live.com I see all my previous data correctly.
    I have tried to do a soft reset , nothing . I have tried to remote outlook.com account and reinsert , nothing !
    I have installed an other calendar application called “chronos calendar” and this one show me some previous data last year but nothing from November-December ... I have written to microsoft community but no more info . I use a lot of the info of calendar for my job and for me it is an important issue !
    I hope a fast solution ...
    Regards,

    Hi,
    You can open a second calendar in a new window and display up to 30 calendars in side-by-side view. You can also overlay calendars to see transparent calendars stacked on top of each other. This view is useful when you want to find a common free time slot
    on several different calendars.
    In Calendar, in the Navigation Pane, right-click the name of another calendar that you want to view.
    Click Open in New Window.
    The calendar that you selected opens in a new Outlook window.
    More information refer to the following article：
    View calendars side-by-side or overlaid
    Niko Cheng
    TechNet Community Support

  • Query executes in RSRT but not in BEx Analyzer

    Hi Everyone,
    I have a query for an infocube and ods object, in the bex analyzer for the infocube the query executes which has around 5000 records but for the ods object which has also 5000 records comes up with this error.
    <b>An exception with the type CX_SY_EXPORT_NO_SHARED_MEMORY occurred, but was
    neither handled locally, nor declared in a RAISING                                                                               
    Message no. RS_EXCEPTION000</b> 
    when I execute the query in RSRT it comes up.
    After closing and re logging into bex analyzer executes the query for the first but for the second time again it throws up this error.
    What could be the problem? Can anyone please let me know. Its really really urgent.
    Thanks,
    Prashant.

    hi Prashant,
    try check in RSRT, after choose your query, click 'properties' and set cache mode to 'main memory cache without swapping'.
    also check oss note 656060-OLAP: Cache main memory displacement not functioning.   
    hope this helps.
    Symptom
    Although one of the following two cache modes
    Main Memory Cache Without Swapping (mode 1)
    Main Memory Cache With Swapping (mode 2)
    is set for a query, long runtimes occur when you execute the query. The statistics (table RSDDSTAT) display the database times.
    If there is a heavy system load, the following message can also appear: RS_EXCEPTION000: No left space in shared memory.
    Other terms
    Cache, performance, displacement, shared buffer
    Reason and Prerequisites
    This problem occurs because the shared memory is insufficiently dimensioned.
    <b>Solution</b>
    Increase the amount of shared memory. The size of the shared memory should be at least 200 MB. You can refer to transaction RSRCACHE for the amount of memory reserved by the main memory cache (RSRCACHE -> Main Memory: Shared Memory/Buffer Reserved).
    The corresponding settings are (at least):
    rsdb/esm/buffersize_kb = 200000
    and, as a precaution, also
    rsdb/esm/max_objects = 10000.
    Alternatively, for queries with large resulting quantities, you can convert the Cache Mode in transaction RSRT1 to
    Cluster/Flat File Cache for Each Application Server (mode 3)
    Cluster/Flat File Cache Across Each Application Server (mode 4)

  • New Portal Theme not showing up in list

    Hello fellow experts,
    I'm using EP 7 sp10...I've created a new portal theme, it shows up on the Portal Display page, under my Themes, however it does not show up in the drop down list (Content admin/Portal Content/portal users/standard portal users/every user core role) as an option for a portal theme...
    Please advise!
    Sincerely,

    Hi Scott,
    Please very these steps,
    Themes:
    System Administration
                  -->
             Portal Display
                            -->
                        Theme Editor 
                                  -->
                              Choose a Theme
                                          -->
                                          Make Changes
                                            If Any
                                                     --> Save It
                                                                -->
                                                                Desktop and
                                                                 Display Rules
                                                                          -->
                                                                          Portal Content                                                                               
    --->
                                                                          Portal Users
                                                                          <--
                                                                 Standard Portal
                                                                       Users
                                                                 <--
                                                            Copy [Default Frame
                                                             Work Page & Desktop]
                                                        <--
                                              Paste it In a New Folder
                                            Rename the Desktop
                                           <--
                                             1).Open The Renamed Desktop
                                             2). Open Folder Themes (sys) and R.C
                                             3).Add theme to DESKTOP.
                                             4) Save it.
                                             <--
                                     Open ->portal Admin -> SuperADmin
                                  <--
                          Open -> Master Role Collection
                          <--
                    Select a Role/user/group from Master Role Collection
                 <--
              R.c on Renamed Desktop and “add Portal Desktop To Expression".
            <--
       Open Renamed Dektop,Select the theme,
        <--
      Hit the Button "Set Default" (save)
       <--
    Logoff and Logon the Portal Page.
    Regards,
    Ramganesan K.

  • Portal Content not showing up

    Hi all
    After i upgraded to java sp leve 13 and updated my SLD using CIM and CR_catalog to version 4.
    In Portal main screen in path System Administration -> System Configuration Contents are not coming
    In the bottom of browser i get the following message Please Help
    Problems with this web page might prevent it form displayed properly
    Line: 228
    Char: 1
    Error: Object expected
    COde: 0
    URL: http://localhost:50100/irj/servlet/prt/portal/prtroot/pcd!
         3aprotal_content!2fadministrator!2super_admin!2fsuerp_admin_role!
         2fcom.sap.portal.sysem_administration!
         2fcom.sap.portal.sysem_admin_ws!
         2fcom.sap.portal.sysem_configuration!
         2fcom.sap.portal.sysem_landscape!
         2fcom.sap.portal.contentCatalogTreeSystems

    Bhupinder,
    Did you try with the super admin role, might be a permissions issue.
    Check this thread.
    Portal Pages not displayed unless Super Admin role is assigned
    Cheers,
    Sandeep Tudumu

  • Personalise value icon not available when query executed from portal

    Hi
    The personalise value icon is not available when the query is executed from the portal.
    Is this the norm or is there anything i must change?
    Regards
    Shalini

    Since you have not given us much information to go on, I will start with the basics...
    Have you activated the Personalization DSOs (0PERS_WTE, 0PERS_BOD & 0PERS_VAR)? 
    If not, you will need to do so in tcode SPRO (SAP Reference IMG --> SAP NetWeaver --> Business Intelligence --> Settings for Reporting and Analysis --> General Settings for Reporting and Analysis --> Activate Personalization in BEx)
    Are you running a BW 3.5 query or a BI 7.0 query?
    If BI 7.0, the way to set personalization values has changed. You have to open the personalization section of the variables refresh screen by clicking on "Show Personalization Values" at the top of the screen, then move the desired variables down to that section.
    Hope some of this helps...
    Bob

  • *.portal file not showing certain images (WLP 8.1)

    Hi,
    In WL portal 8.1 I have a portlet with 2 images: one made by the html tag
    <img>, one made by the jsp tag <netui:image>
    In a direct test of the portlet's page flow they both show up.
    Inside a portal file they also both show up.
    But the minmized, maximized buttons of the portlet don't show (they get a
    red X)
    I have 2 images in the header references by my own shell: one <img>, one
    <netui:image>.
    in a direct test they both show up.
    Inside a portal file only the <img> (which uses request.getContentPath() by
    the way) shows up.
    How do I get my image to show up?
    You can easy recreate this problem: Open a new portal application, a new
    portal web project and a new portal file.
    Then create a new page flow (based on for example the user login control)
    and drag this one in the portal file.
    Select minimized and maximized button and take a look at the portal file.
    Thank you for any and all help,
    Geoffrey

    Tomas,
    This is a known limitation and will be fixed in SP2. At the moment, WLP can
    only authenticate and generate profiles for users out of a single ATN
    provider.
    See the link below for how to properly identify the ATN provider.
    SOLUTION:
    You can only use com.bea.p13n.security.Authentication to login to the portal
    app for users who are in the configured authentication provider. Specify
    the
    configured authentication provider with the system property
    "com.bea.p13n.usermgmt.AuthenticationProviderName" when you start up the
    server or use usermgmt-provider.properties with the property
    "com.bea.p13n.usermgmt.AuthenticationProviderName". See the javadoc for the
    RealmHelper at
    http://edocs.bea.com/wlp/docs81/javadoc/com/bea/p13n/usermgmt/RealmHelper.ht
    ml#getProviderMBean
    -Phil
    "Tomas Koutny" <[email protected]> wrote in message
    news:3f69c6fd$[email protected]..
    >
    Hallo,
    I configured an external Ldap server for authenticating users. Also, Iwant to
    enable p13n for users. Therefore, I have login portlet callingAuthentication.login(name,
    pwd, req) and that login method should load profile for the user beinglogged
    in.
    That's ok, all work fine.
    The problem starts when using 2 authentication providers. I want portaladministrators
    (weblogic, ...) to be in WL internal Ldap and employees to be in anexternal Ldap.
    First auth.provider is the DefaultAuthenticator (with sufficient flag) andthe
    second is OpenLdapAuthenticator (with required flag).
    And now, user profile is loaded for internal users only !!!
    When I try to log in as an employee (member of external Ldap) I'm loggedin well
    and then an exception is thrown - user profile is not loaded due to "userwas
    not found".
    See stacktrace in appended file.
    Any idea?
    Thanks,
    Tomas Koutny, Cleverlance

  • Directory console not showing entries ???

    Hello,
    I just migrated around 15,000 entries into iPlanet Directory through the Import button. They went in no problem, and I could view them through the console. I then removed them using an ldif and import. I wnet back to view the entries and I noticed none would show up, although there were still 2 left. If I do an export to LDIF they show up, but I cannot see them in the console. I am running the version of iPlanet Directory that comes with Solaris 9. ANy help would be appreciated.
    Jim G

    i did the reindex and i still can see the subentries
    when I try and delete all the entries i get "object not found"
    but when I search I see all the entries
    help please
    DS 5.1 on Solaris 8

  • Dropdown menu not showing entries

    Hello. I created a fillable form in Acrobat XI using text boxes, check boxes, and dropdown menus. The first issue is when the form is opened on a tablet running Windows 8.1 and using Acrobat Reader XI, the fields are not highlighted. The second issue (bigger one) is when the form is emailed from the tablet and opened on my laptop in the office, none of the dropdown menu fields are not populated at all. I have Acrobat Pro XI on the Windows 8.1 laptop. The text boxes and check boxes work fine. When I open the saved file in the tablet, the dropdown menus are populated.
    Interestingly, when the form is filled out, saved, and emailed from a Mac, the dropdown menus and check boxes work fine, but the entries in the text boxes are blank unless I click the field. Then they only show up until I click out of it.
    Any suggestions on how to fix these issues would be greatly appreciated.

    The problem with the ones you received from the Mac user is they used the Preview application, as opposed to Adobe Reader. Preview currupts PDFs in a number of ways and this behavior is an indication that it's corrupted. You can open the file in Acrobat, export the form data to FDF/XFDF, and import the from data into a blank, non-corrupted version of the form.
    Regarding the problem with the dropdowns when saved from the tablet, can you post a smaple form somewhere so we can take a look?

  • Comp Cal not showing entries I make on iPhone Cal

    I add calendar entries to my iPhone, and when I go check the calendar on the computer it's not current/equal/the same as my iPhone. I don't have to plug in my phone for this do I? I have mobile me. Shouldn't that info just "push" to the "cloud" and then update the home computer cal?
    Also, I subscribed to my Wife's calendar and that does show up on my iPhone, but my question is: If she adds/changes an entry on her iPhone cal OR her computer cal, will my iPhone reflect those changes via the "push" apple says we have?
    Thanks in advance for anyone who can fix and answer these questions...

    Found the solution myself:
    Add a timezone and suddenly it works perfectly. Still weird iCloud doesn't handle it very well.
    BEGIN:VCALENDAR
    METHOD:PUBLISH
    VERSION:2.0
    X-WR-TIMEZONE:Europe/Amsterdam
    CALSCALE:GREGORIAN
    BEGIN:VTIMEZONE
    TZID:Europe/Amsterdam
    BEGIN:DAYLIGHT
    TZOFFSETFROM:+0100
    RRULE:FREQ=YEARLY;BYMONTH=3;BYDAY=-1SU
    DTSTART:19810329T020000
    TZNAME:CEST
    TZOFFSETTO:+0200
    END:DAYLIGHT
    BEGIN:STANDARD
    TZOFFSETFROM:+0200
    RRULE:FREQ=YEARLY;BYMONTH=10;BYDAY=-1SU
    DTSTART:19961027T030000
    TZNAME:CET
    TZOFFSETTO:+0100
    END:STANDARD
    END:VTIMEZONE
    BEGIN:VEVENT
    DTEND;TZID=Europe/Amsterdam:20111204T071000
    UID:anyid
    DTSTAMP:20111204T180917Z
    DESCRIPTION:The quick brown fox jumps over the lazy dog
    STATUS:CONFIRMED
    SEQUENCE:0
    SUMMARY:Test
    LAST-MODIFIED:20111204T180917Z
    DTSTART;TZID=Europe/Amsterdam:20111204T064000
    CREATED:20111204T180917Z
    END:VEVENT
    END:VCALENDAR
    Thanks. You're welcome.

  • Discoverer Report opened from Portal does not show correct data

    Hi,
    When I try to open a Discoverer report from a portal that I created, it shows stale data but when I click on "Analyze", it shows all the data correctly.
    Does anyone know what the reason could be for this?
    Thank you,
    Santoshi

    I assume you used the Discoverer Portlet Provider. A discoverer portlet is never live data. When you define the portlet you specify how often to 'refresh' the data. If you skipped this step, then you just get the data as-of when you created the portlet.
    Generally you specify the refresh time to be sometime after your usual database load completes.

  • ICal not showing entries in month view

    I have entered a entry that starts on the 22nd July at 0600 and ends on the 29th July at 0900. In the months view the only entry visible is on the 22nd and it just says 0600 not the title i have given the entry, in the day and week views the entry can be seen okay. If I change the entry type to all day event, then ical displays the title and it puts it in each day on the month view!! However as this is a timed event I don't want to change it to an all day event, I just want it to display each day in the month view....
    I hope this makes sense, as I can't work out if this is a bug or if I really am doing something wrong, in Outlook/Entourage this would display as I need it to!
    Cheers
    Nick

    Ko be,
    Application UI issues are in many cases, caused by a corrupt plist file.
    Quit iCal, and try removing the com.apple.iCal.plist file from your Macintosh HD/Users/yourusername/Library/Preferences Folder. Since that Library is now hidden, you have to use the Finder>Go Menu>Depress the "Option" key>Library. Drag the .plist file to your desktop, and log out/in or restart and check iCal for functionality.
    Also read Apple iCal 5 Office Software Review | Macworld for a description of Lion iCal.

  • Query Executing in WAD and not in BEx Analyzer

    Hi Experts,
    I am creating a query to find the "Execution Time Analysis" in PP the query has been successfully running in WAD but it is not opening in BEx Analyzer and throwing a message called RSBOLAP 000 and RS_EXEPTION 107.
    What will be the reason. could you please let me know.
    Quickest solutions will be appreciated.
    Phani.
    Edited by: Sai Phani on Jul 17, 2008 12:06 PM

    Hi
    If you are in 2004s version then check the support package level.
    Discuss with Basis regarding the support package.
    Regards
    M.A

Maybe you are looking for