Directory console not showing entries ???

Hello,
I just migrated around 15,000 entries into iPlanet Directory through the Import button. They went in no problem, and I could view them through the console. I then removed them using an ldif and import. I wnet back to view the entries and I noticed none would show up, although there were still 2 left. If I do an export to LDIF they show up, but I cannot see them in the console. I am running the version of iPlanet Directory that comes with Solaris 9. ANy help would be appreciated.
Jim G

i did the reindex and i still can see the subentries
when I try and delete all the entries i get "object not found"
but when I search I see all the entries
help please
DS 5.1 on Solaris 8

Similar Messages

  • Calendar issue - Does not show entries previous Ja...

    Hi, 
    from beginning of January the calendar of my Lumia does not show any more entries made previously ! It was working  but from I think 7th of January nothing .. The calendar is sync with outlook.com calendar and if I go to http://calendar.live.com I see all my previous data correctly.
    I have tried to do a soft reset , nothing . I have tried to remote outlook.com account and reinsert , nothing !
    I have installed an other calendar application called “chronos calendar” and this one show me some previous data last year but nothing from November-December ... I have written to microsoft community but no more info . I use a lot of the info of calendar for my job and for me it is an important issue !
    I hope a fast solution ...
    Regards,

    Hi,
    You can open a second calendar in a new window and display up to 30 calendars in side-by-side view. You can also overlay calendars to see transparent calendars stacked on top of each other. This view is useful when you want to find a common free time slot
    on several different calendars.
    In Calendar, in the Navigation Pane, right-click the name of another calendar that you want to view.
    Click Open in New Window.
    The calendar that you selected opens in a new Outlook window.
    More information refer to the following article：
    View calendars side-by-side or overlaid
    Niko Cheng
    TechNet Community Support

  • CAS console not showing up in Workbench

    I installed Endeca commerce 3.1.2 components - mdex, platform services, tools and frameworks and cas on my windows machine. I did select CAS Console Workbench extension option during CAS installation. I then deployed Discover app using CAS and the app seems to be working just fine. But the CAS console is not showing up in workbench. It (CAS) works fine from command prompt. I tried uninstalling and reinstalling all the components but still the same result. Any idea what I could be missing or doing wrong? Thanks in advance!

    If you have also installed the current iTunes version, download the current install and re-install it over the existing - no need to remove iTunes first.

  • Bpel console not showing domain name

    Hi
    i have installed a new jdev 10.1.3.1 and also have 10.1.2. first version is working fine examples but bpel console is not showing domain name in 10.1.2.
    pls anyone can tell me what may be the problem.Is it bcoz of two version in same machine.?? Its urgent help out............

    this is understandable - at per default we use oracle lite - which only allows ONE installation on a windows system ..
    to run both in paralell you have to install a db and create the 2 schemas (10.1.2.0.2 and 10.1.3.1) - I posted a blog note on this ..
    http://clemensblog.blogspot.com/2006/04/oracle-bpel-xe-part-2.html
    hth clemens

  • IPod Nano directory does not show loaded tracks

    I have a 7th Gen iPod Nano that was formatted by iTunes for Windows 7 that does not show the tracks loaded on it once it is ejected. Apple has replaced the Nano twice with no change. Working with AppleCare Support I have removed iTunes and everything else from Apple several times in accordance with the "Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8" Knowledge Base article. We tried various cables and different USB ports but they made no difference. In between each removal I have run CCleaner's registry search and cleanup tool and restarted the computer. Windows 7 is and has been up to date and the version of iTunes has always been the latest. iTunes will recognize the Nano and I can load playlists on it but once I eject it and select the music icon it says that there is no music loaded. When I check to see if the iPod knows that there is anything loaded it shows that there is something loaded by virtue of the fact that it shows the same amount of free space as iTunes did just before it was ejected. I have spent a couple of weeks chasing this problem with the AppleCare Support Team in Cupertino and we are all stumped.
         I do not have any problems when I connect my iPod Classic to the same computer and load tracks on it.
         All of the Nano's that have experienced this problem have worked fine when restored on my Mac.
         The original Nano worked fine with this Windows 7 computer for about 9 months and then started saying that it needed to be restored every time it was connected even if it had just been restored. That problem brought about the first replacement of the Nano. After all of our efforts the AppleCare Support Team suggested that we replace the Nano again so that is what we did this week with no resolution of the problem.
         Does anyone know of any Windows software that is known to create problems with iTunes?
         I had not connected a Nano to the computer for about 2 months before I started having problems so I have no way of determining what might have been installed that caused this problem. This is a company computer and all software installations and updates are controlled by our IT Dept. iTunes is supported by the company due to the fact that our IT Dept. personnel and senior management have company iPhones and some iPads. We did connect the Nano to one of the IT computers and it was recognized and iTunes was able to see the tracks loaded but there was nothing available once it was ejected.
         Any assistance will be greatly appreciated.
    Tom Davis

    1. Shouldn't you be posting on the Nano Section?
    2. UPDATE your iTUNES
    3. It should be fixed...if not reply

  • BPEL Console not showing input fields for process

    I'm having a problem with our BPEL processes. When testing them in the BPEL Console the form for entering the input fields does not appear, even when switched to XML entry instead of HTML.
    The problem seems to occur in processes which take their input schemas from a different directory from the BPEL process. This was working fine in Oracle 10.1.2. We can successfully load the schema by entering its URL, and if the process is started without entering any data, the input message is correctly generated, just with all fields empty. So it seems like the schema is being found.
    When both the input and output schemas are specified inline in the project WSDL file, it works correctly. The problem occurs when referencing the schema in a different location. We have numerous projects which share common schemas, so specifying them all in-line is not a workable solution.
    Has anyone else encountered this problem, or found a solution to it?
    Thanks for your help.
    Howard

    I have similar process where I am able to see the instance incomplete process C, the issue is with the present process.
    actually process B and C are from production I have designed the new process A, which is calling B and B is calling C.
    I have also designed other process A1(new) which is calling B1(existing) and B1 is calling C1(existing), there I am able to see the instance of C1
    dont know why it is happening like this for process C
    please advice
    thanks
    yatan

  • SAP management console not showing AS java

    Hello all,
    I have made a NW04s installation system test (linux+oracle). I then installed as java add-in EP and BI (AS JAVA, EP CORE, EP, BI JAVA). It was NW04s SR2 with SPC13 and kernel not changed: 700 patch 111.
    In the SAP management console there were 3 entries: one for database, one for abap instance and one for java instance.
    In the abap instance node I was able to see an entry for "AS java"  which was whowing two process (SDM and another one...).
    I made a new test installation similar to the previous one and in the SAP management console I do not see any entry for "AS Java". Of course AS java is installed and running !
    How can I get SAP management console show "AS java" ????
    Thank you
    Jean

    Hi Jean,
    Start Services.msc from run prompt (if this is windows based installation)
    and look for <SID>services, where <SID> is your instance name..
    Please do the following and let me know if this of any success
    You get back your MMC , please do the following steps.
    1. Go to Run and type MMC.
    2.Go to file and select add/remove snap in ( alt+m).
    3.Click on add
    4.Select the SAP system from there.
    Save the MMC console which you have created now....This should work fine.
    Thanks
    Pankaj

  • Open Directory groups not showing up in Windows

    Hello,
    we are using Open Directory on a Leopard 10.2 as a primary PDC for mac, linux and windows clients.
    The Kerberos sign in works as expected, but we can not get any group created in the OD to be displayed (or selectable) from windows. All users show up, but no groups.
    Anyone got an ides or the same problem?
    Message was edited by: majs

    Same problem here. On Windows client we see only domain users, no domain groups.
    No solution yet.

  • Console not showing trace statement output

    Hello,
    I have set up Flash Builder 4.6 for the first time for an ActionScript project. All good so far except that the console window doesn't show the output from my simple trace statement for my first little Hello World tester? There wasn't a console window on the workspace so I added one but on Run it says
    No consoles to display at this time.
    What do I need to do?
    Any help much appreciated...
    Steve

    I don't see any attempt to assign text to any textfields in your code.  What code are you using that is not working? Where would you be trying to assign to these textfields in your code?  You need to create two textfields and give them instance names.  Then, in your code, you assign the x and y values to those textfeilds...
    tFieldX.text = String(mCoordPlane.mAlignment.x);
    tFieldY.text = String(mCoordPlane.mAlignment.y);
    I also don't see any code relative to checking the position of the mCoordPlane.mAlignment to show a message.  After that object changes position you should have a conditional to test if its x,y properties are 0,0, and then assign to a textfield for that message or make a moviewclip appear that has that message, or whatever your intention is for displaying a message.
    if(mCoordPlane.mAlignment.x == 0 && mCoordPlane.mAlignment.y == 0){
         messageField.text = "aligned";
    You may end up having issues with accuracy regarding geting a zero value since you are operating with decimal value changes... meaning you may not get exactly 0,0 values.
    Also, in the code you showed there is unnecessary repetition of these lines...
            trace(mCoordPlane.mAlignment.x);
            trace(mCoordPlane.mAlignment.y);
    If each conditional includes it, then you only need to have it once at the end after the conditionals

  • Dropdown menu not showing entries

    Hello. I created a fillable form in Acrobat XI using text boxes, check boxes, and dropdown menus. The first issue is when the form is opened on a tablet running Windows 8.1 and using Acrobat Reader XI, the fields are not highlighted. The second issue (bigger one) is when the form is emailed from the tablet and opened on my laptop in the office, none of the dropdown menu fields are not populated at all. I have Acrobat Pro XI on the Windows 8.1 laptop. The text boxes and check boxes work fine. When I open the saved file in the tablet, the dropdown menus are populated.
    Interestingly, when the form is filled out, saved, and emailed from a Mac, the dropdown menus and check boxes work fine, but the entries in the text boxes are blank unless I click the field. Then they only show up until I click out of it.
    Any suggestions on how to fix these issues would be greatly appreciated.

    The problem with the ones you received from the Mac user is they used the Preview application, as opposed to Adobe Reader. Preview currupts PDFs in a number of ways and this behavior is an indication that it's corrupted. You can open the file in Acrobat, export the form data to FDF/XFDF, and import the from data into a blank, non-corrupted version of the form.
    Regarding the problem with the dropdowns when saved from the tablet, can you post a smaple form somewhere so we can take a look?

  • Comp Cal not showing entries I make on iPhone Cal

    I add calendar entries to my iPhone, and when I go check the calendar on the computer it's not current/equal/the same as my iPhone. I don't have to plug in my phone for this do I? I have mobile me. Shouldn't that info just "push" to the "cloud" and then update the home computer cal?
    Also, I subscribed to my Wife's calendar and that does show up on my iPhone, but my question is: If she adds/changes an entry on her iPhone cal OR her computer cal, will my iPhone reflect those changes via the "push" apple says we have?
    Thanks in advance for anyone who can fix and answer these questions...

    Found the solution myself:
    Add a timezone and suddenly it works perfectly. Still weird iCloud doesn't handle it very well.
    BEGIN:VCALENDAR
    METHOD:PUBLISH
    VERSION:2.0
    X-WR-TIMEZONE:Europe/Amsterdam
    CALSCALE:GREGORIAN
    BEGIN:VTIMEZONE
    TZID:Europe/Amsterdam
    BEGIN:DAYLIGHT
    TZOFFSETFROM:+0100
    RRULE:FREQ=YEARLY;BYMONTH=3;BYDAY=-1SU
    DTSTART:19810329T020000
    TZNAME:CEST
    TZOFFSETTO:+0200
    END:DAYLIGHT
    BEGIN:STANDARD
    TZOFFSETFROM:+0200
    RRULE:FREQ=YEARLY;BYMONTH=10;BYDAY=-1SU
    DTSTART:19961027T030000
    TZNAME:CET
    TZOFFSETTO:+0100
    END:STANDARD
    END:VTIMEZONE
    BEGIN:VEVENT
    DTEND;TZID=Europe/Amsterdam:20111204T071000
    UID:anyid
    DTSTAMP:20111204T180917Z
    DESCRIPTION:The quick brown fox jumps over the lazy dog
    STATUS:CONFIRMED
    SEQUENCE:0
    SUMMARY:Test
    LAST-MODIFIED:20111204T180917Z
    DTSTART;TZID=Europe/Amsterdam:20111204T064000
    CREATED:20111204T180917Z
    END:VEVENT
    END:VCALENDAR
    Thanks. You're welcome.

  • Open directory list not showing at startup, where do i start to look

    If my suite of iMacs are not picking up the open directory list at startup and I know they have the correct details, what process should I go through to find the problem. The server all looks ok, but after recent changes made by our local authority the list no longer shows up.
    The server is running 10.5
    Could DNS be the problem for example. I have limited experience of setting up osx servers.
    Regards Peter.

    I presume you mean the login window is not listing the Open Directory user accounts? This actually is the normal default behaviour for the login window.
    Is your login window showing just two boxes for the user name and password, or is it listing just local user accounts? If it is listing some user accounts is "Other" in that list?
    When I used to run 10.5 Server, I used to create a Computer Group, add all my client computers to that group and set a managed preference for that group to force my client computers to show a full list of Open Directory accounts. You do this as follows -
    Launch Workgroup Manager
    Login to Workgroup Manager
    If you don't already have a suitable one, create a new Computer group
    If needed add all your client computers to this Computer group
    Now with that Computer group still selected, click on the Preferences icon at the top of the Workgroup Manager window
    Click on the Login choice on the left
    You should now see at the top a set of radio buttons for Never, Once, or Always - choose Always
    If you now look in the main part of the window you should see options for things like Style - List of users (which is what you want) and under that tick boxes for Show network users (which is also what you want)
    When you have set things as desired, click on the Apply Now button in the bottom right
    You will need to reboot the client computer to test this
    Note: If you have a really large number of user accounts it might take a while to draw the list of accounts in the Login screen. I had about 70 and it was fairly fast.

  • ICal not showing entries in month view

    I have entered a entry that starts on the 22nd July at 0600 and ends on the 29th July at 0900. In the months view the only entry visible is on the 22nd and it just says 0600 not the title i have given the entry, in the day and week views the entry can be seen okay. If I change the entry type to all day event, then ical displays the title and it puts it in each day on the month view!! However as this is a timed event I don't want to change it to an all day event, I just want it to display each day in the month view....
    I hope this makes sense, as I can't work out if this is a bug or if I really am doing something wrong, in Outlook/Entourage this would display as I need it to!
    Cheers
    Nick

    Ko be,
    Application UI issues are in many cases, caused by a corrupt plist file.
    Quit iCal, and try removing the com.apple.iCal.plist file from your Macintosh HD/Users/yourusername/Library/Preferences Folder. Since that Library is now hidden, you have to use the Finder>Go Menu>Depress the "Option" key>Library. Drag the .plist file to your desktop, and log out/in or restart and check iCal for functionality.
    Also read Apple iCal 5 Office Software Review | Macworld for a description of Lion iCal.

  • Query Executed in Portal do not show entry in RSDDSTAT_DM

    Hi
    We are on BI 7 and I am tuning one query.The User has complained that in BEX it doesn't take time but in Portal it takes time.  I have created 1 Aggregate and the query is using the aggregate. This is confirmed as I have executed the query in RSRT.I can get the DB time in RSDDSTAT_DM table.
    I have executed the same query Portal but the query details is not reflected in table RSDDSTAT_DM . I have to confirm that even in Portal it is using the aggregate and I need the time it takes to run the query in the portal .
    Kind regards,
    Yogi

    This should create an entry in RSDDSTAT_DM. Try this.
    1. Launch the query in the Portal
    2. Add "&PROFILING=X" to the end of the URL.
    3. This should provide performance information at runtime...

  • Photo in directory does not show up in album

    Hi,
    I'm new to PhtoShop and have a problem I can't fix.
    I have copied a photo, using Explorer, into a directory from which an album has created.
    When I do a general search for the photo by name, it appears but when I open the album it is not displayed.
    The photo is not hidden but has no tags.
    I tried "Find items in album", but without success.
    I would appreciate any help in this matter,
    S660117.

    I just realized that I can drag and drop the photo on the album in question.
    Once I did that, it appears as expected.
    s660117

Maybe you are looking for