Query Migration from bw3.5 into BI7.0

Hi friends,
I need to run the queries in BI7.0 which are in BW3.5. How can we do this and what are the prerequisites.
Thanks&Regards
Shaliny M.

Hi,
Chk out this link....
/message/1969749#1969749 [original link is broken]
/message/2324740#2324740 [original link is broken]
All the queries will work if the peratining objects exists in the warehouse. Other than this there aren't any spl measures that actually needs to be taken care to while running the query on BI 7.0, to my knowledge.
Happy Life,
Aravind

Similar Messages

Work book size increased by 4 times after migrating from BW3.5 to BI7

Hi Experts
work book size increased by 4 times after migrating from BW3.5 to BI7
our client runs the report using BI web report and exports to excel sheet.
she asks us to investigate why the size of the work book isincreased by 4 times after migrating from BW3.5 to BI7.
please let me know what you think.
thank you for reading this.
Regards
satish

ANY suggestion would be greatly appreciated

How to migrate the Workbooks from BW3.1 to BI7

Dear Team,
How to Migrate the workbooks from Bw3.1 to BI7. We have recently upgraded to BI7. What are necessary steps and necessary cares needs to take for this.
Best Regards,
SG

Migration is manual. When you open up a 3.x component in a 2004s tool in migrates it. There is no automatic migration available
Rolling out the New SAP NetWeaver 2004s BI Frontend Tools
Migrating Advanced BEx Analyzer Workbooks - What VBA is Supported?
Hope it Helps
Chetan
@CP..

Migration of 2lis_11_vahdr DS into BI7

Dear Experts,
I have issue with 2lis_11_vahdr data source.
I hope this DS is not support BI7 directly, I relpicated it from R/3 and Migrated into BI7.
Now while converting the existing Infosource into Transformations Iam getting fully mapped Transfermations.
I have installed 0SD_C03 cube also.
I would like to load dats from 2lis_11_vahdr in BI7 with all BI7 option I mean using Transformation method(if content transformation available plz let me know).
Please help me in this...
Thanks,
APC

Hi APC,
1. Select the required source system in the BI content tab.
2. In BI content, select grouping as install objects Before... search for the Cube you want to install and transfer it for the installation.
3. Select the check boxes for the installation of objects.
4. Check Data flow is avaialable properly from Cube>Updaterules>info source>Transfer rules>data source.
5. Then try migrating in the order update rule> Inforsource> transfer rules and then the datasource.
Hope thses steps will help you..revert the migrated data source back to 3.X form and try doing this.
Regards,
Rangz

Query Migration from BW 3.5 to BW 7.0

Dear All,
We are in the process of migrating from BW 3.5 to BW 7.0 and need to find answers to the following-
Will the query variants created with BEx 3.5 and BW 3.5 be available with BEx 7.0/ BEx 3.5 in BW 7.0.
What all settings need to be made to ensure tht the queries are migrated intact, with variants and other features.
Are there any tables where this data can be found.
We are planning to go-live with 3.5 functionalites as they were, its a technical upgrade.
Regards,
Saurabh Diwakar

Hi Diwakar,
For Query migration - u have to do one simple thing only...
i.e just open the query in 3.x and save it ... then it will be automatically migrated to 7.0...
Hope it helps..
Regards,
V. Vijay

Query Migration from 3.5 to 7.0

Hi All,
We have a upgrade done from 3.5 to 7.0.
We need to migrate queries which were developed in 3.5 to 7.0.
As of now, we are migrating EACH query by opening it in 7.0 and Saving it.
This works fine.
But we have N number of queries of diffrent projects.
Any pointers how to migrate ALL the queries at one time in 7.0.
Thanks,
Best regards,
Prashant

Hi Diwakar,
For Query migration - u have to do one simple thing only...
i.e just open the query in 3.x and save it ... then it will be automatically migrated to 7.0...
Hope it helps..
Regards,
V. Vijay

Issue w RSCUSTV23 Analysis Authorization System after upg from BW3.5 to BI7

We set it to "Obsolete Concept with RSR Authorization Objects" and we do no understand why from the suddenly changes to
"Current Procedure with Analysis Authorization" from no where - any ideas why from the sudden this changes by itself?
still were not not migrating our security to the new version...we will do it around april...but in the meanwhile i would like ot understand why is happening by itself.
thanks,

Note that the logging will probably only help you if you activate it in the transport tool profiles (STMS) as it sounds to me as if imports of the customizing are making this setting.
Did you set the value in DEV and transport it through or did you use one of the "BW utility reports" to change it (in which case you do not always have change documents and inconsistent customizing is "by design"...).
Cheers,
Julius

Abap routines from bw3.5 to bi7.0

Hi,
As you might aware that in BW3.5 , ABAP procedure language is used and in 7.0. ABAP OO.
when we try to migrate ABAp procedure language update rules to ABAP OO, would system convert them automatically or do we have to migrate each routine manually. I understand that certain abap statements that are in ABAP procedure language will not be suitable in abap oo?
Does any one have list of abap procedure language statements that do not work in ABAP OO?
Thanks
Vennela

Hi,
If you migrate them, it will automatically get converted.
Regards
Sathiya

How to :Migration from existing 595 into new 595 in RAC?

Hi all,
This is the bit complicated task for me(i.e) first let me explain our environment
We are having 595 two instances (RAC) and 8300 is our storage due to the position we are not able to enhance the memory and CPU in this existing 595 Server.So what we are planning to make another 595 servers with some high configuration?
Since this is new area for me dont know any idea of how to migrate these into new 595 Servers.
fy.i storage will not get any change it will be as it is.
I need any docs or anyone pls share their ideas and steps how they did(suppose if anyone did this already)
Waiting For your reply.
Thanks & Regards
M.Murali..

If your objective is to replace the exiting 595's with new one's then follow the steps below :-
1. configure both the new servers (595) for RAC installation - follow the pre-install steps required for installing clusterware etc. e.g. storage, network, ssh etc..
2. add both the new servers as a "node3" and "node4" into the existing 2-node cluster - follow the "node add" procedure in the documentation
3. turn-off the first 2 nodes on old servers (node1 and node2)
4. test your application with only the nodes...
5. remove the old nodes using "node delete" procedure given in the documentation
reference - http://download.oracle.com/docs/cd/B19306_01/rac.102/b14197/adddelunix.htm#BEICADHD
- Siba
http://dbathoughts.blogspot.com

How merge query results from joined table into one additional column

<code>
Here is example
TABLE A:
id | value
1 | a
2 | a
3 | b
TABLE B
id | id_in_table_a | value
1 | 1 | d
2 | 1 | e
3 | 2 | g
</code>
this select should get all columns from table A where value = 'a' and all values related to this record from B merged to one column separated for example with pipe, so the output should looks like this
<code>
id | value | merged_column
1 | a | d|e
2 | a | g
</code>
thanks for help

If you are on 10g, you can use this:
SQL> create table a
2 as
3 select 1 id, 'a' value from dual union all
4 select 2, 'a' from dual union all
5 select 3, 'b' from dual
6 /
Tabel is aangemaakt.
SQL> create table b
2 as
3 select 1 id, 1 id_in_table_a, 'd' value from dual union all
4 select 2, 1, 'e' from dual union all
5 select 3, 2, 'g' from dual
6 /
Tabel is aangemaakt.
SQL> select id
2       , value
3       , rtrim(v,'|') merged_column
4    from ( select id
5                , value
6                , v
7                , rn
8             from a
9                , b
10            where a.id = b.id_in_table_a
11            model
12                  partition by (a.id)
13                  dimension by (row_number() over (partition by a.id order by b.id) rn)
14                  measures (a.value, cast(b.value as varchar2(20)) v)
15                  rules
16                  ( v[any] order by rn desc = v[cv()] || '|' || v[cv()+1]
17                  )
18         )
19   where rn = 1
20 /
   ID VALUE MERGED_COLUMN
    1 a     d|e
    2 a     g
2 rijen zijn geselecteerd.Regards,
Rob.

Delta not working after upgrade from 3.5 to BI7.0

Hello All,
We have recently upgraded from BW3.5 to BI7.0 and the standard delta is not working now after the upgade. The name of the Extractor is 0CRM_SALES_ACT_1.
Did anyone come across this problem before or can anyone suggest the solution.
Thanks
Madhu

Hi Madhu,
I've experienced a similar problem with this extractor. I attempted to Initialize Delta with Data Transfer to no avail. The job ran for 12+ hours and stayed in "yellow" status (0 records extracted). The following steps worked for me:
1. Initialize Delta without Data Transfer
2. Run Delta Update
3. Run Full Update and Indicate Request as Repair Request
Worked like a champ, data load finished in less than 2 minutes.
Hopefully this will help.
Regards.
Jason

A problem in JSF migration from 1.1 to 1.2

Hi all,
This is Sailaja I am working with a project that is about migrating JSF1.1 to JSF1.2,
My problem is..
In my project we have used CommandLinkTag class to develop a custom component when using 1.1
But in 1.2 vertion CommandLinkTag class designed as "final" so now i am unable to extend the final class so my old code gets problem.
Please any one provide some solution or else i need some clarification about why they made that class as final,
Is there any other class developed for that..
Thanks
Sailaja N
Edited by: nsailaja on Aug 24, 2010 5:43 AM

If the target forest is running Exchange 2003, you aren't 100% wrong in saying it may not be possible. If you are migrating from Exchange 2010 to a new forest, you need to be migrating into an Exchange 2010 organization - downlevel migrations aren't supported,
to the best of my knowledge. Here are the links supporting Exchange forest migrations, and they specifically say they are for migrations into an Exchange 2010 organization:
http://blogs.technet.com/b/meamcs/archive/2011/06/10/exchange-2010-cross-forest-migration-step-by-step-guide-part-i.aspx
https://gallery.technet.microsoft.com/office/Cross-Forest-Migration-7443029c
http://blogs.technet.com/b/exchange/archive/2010/08/10/3410619.aspx
http://technet.microsoft.com/en-us/library/dd876952.aspx
I'm pretty sure that the tools used won't allow you to migrate from Exchange 2010 into Exchange 2003. I'm sure you can kludge together a migration process that exports mailboxes to PST, then imports them into the target mailboxes, but that would be
a painful process.

Data Migration from CRM 5.0 to CRM 7.0

Hi Friends,
We are into a re-implementation on CRM 7.0. The old system was on CRM 5.0.
Since this is not an upgrade, the data will not copied over from the old system into the new system.
So, now I would like to know how to migrate data (master/transaction) from CRM 5.0 into 7.0.
I have read that we can make use of BAPI/LSMW/IDOC/XIF adapters to push info into CRM.
But, the customer wants all the historical data to be in the new system.
I think master data can be handled.... but how to migrate the transaction data?.... i mean the number ranges/document flow.. and other relationships.. how can we maintain the same links into the new system?
If it was a migration from legacy system into the SAP CRM, we could have gone ahead with new number ranges etc... but this migration is from SAP to SAP.
Also, we will have ECC6.0 connected to CRM 7.0. ANy additional things to be taken care of when the connection is live in DEV/QA/PROd instances?
Any pointers to this ?

Hi Gary,
As per my understanding, your data migration involves quite complex scenarios covering the CRM and ERP box. As the customer needs the old data to be present in the new implementation, the old data needs to be migrated from the CRM 5.0 to CRM 7.0. For the migration to happen, you need to setup the customization (like the number ranges,Condition Data Tables, etc ). Then only you can proceed with the data migration. Also, you need a proper backup plan as this involves proper backup of the data.
Once the setup is complete, you need to configure the ECC6.0 with the CRM7.0 system. Here also, you need to do a lot of settings and performing the Initial loading of the Adapter Objects. But before you proceed with the entire operation, the entire system landscape must be properly defined with appropriate settings.
My recomendation is to take help of SAP Consultants and data migration experts as they are the best persons to guide you on this. Also it would be great if you can go through the SAP Best Practices documents which are best repository documents to guide you on this.
Have a look on this link for an overview of the CRM Data Migration
http://help.sap.com/saphelp_crm60/helpdata/en/1a/023d63b8387c4a8dfea6592f3a23a7/frameset.htm
Hope this helps.
Thanks,
Samantak.

Migration from 1 domain to another (in relation to Exchange)

Hi, hoping someone can give me an opinion on the best way to carry out this task as it's quite a big project. I've read various articles on technet and other blogs, but I'm not sure if this is even possible with the versions of Exchange involved. Details
below:
We are carrying out a domain centralisation project - merging from an external forest (Domain B for example purposes) into another Forest (target Domain A). I will be using ADMT to carry out the account, group migrations etc and will include SID history
when doing so.
There is a two way external trust between the domains.
Domain B (source domain) has it's own Exchange 2010 environment. The target domain is on Exchange 2003 SP2.
Once I have migrated the accounts, is there any Exchange tools or methods for me to ensure that the migrated accounts can still access their Exchange mailboxes (with the domain trust still in place)?
As mentioned earlier I will be migrating SID history to ensure no disruption with access to resources, I have read that this would also be needed to ensure users can still access their original mailboxes in the source domain. Eventually we will be migrating
the mailboxes from old domain to new but this is phase 2 of the project (either by PST import or however this can be done, that will need to be thought about later...).
Any advice on how I can make sure the migrated users can still access their mailboxes and what I need to do, would be much appreciated.
Thanks,
Sarah

If the target forest is running Exchange 2003, you aren't 100% wrong in saying it may not be possible. If you are migrating from Exchange 2010 to a new forest, you need to be migrating into an Exchange 2010 organization - downlevel migrations aren't supported,
to the best of my knowledge. Here are the links supporting Exchange forest migrations, and they specifically say they are for migrations into an Exchange 2010 organization:
http://blogs.technet.com/b/meamcs/archive/2011/06/10/exchange-2010-cross-forest-migration-step-by-step-guide-part-i.aspx
https://gallery.technet.microsoft.com/office/Cross-Forest-Migration-7443029c
http://blogs.technet.com/b/exchange/archive/2010/08/10/3410619.aspx
http://technet.microsoft.com/en-us/library/dd876952.aspx
I'm pretty sure that the tools used won't allow you to migrate from Exchange 2010 into Exchange 2003. I'm sure you can kludge together a migration process that exports mailboxes to PST, then imports them into the target mailboxes, but that would be
a painful process.

Extraction issue in BI after Migration of dataflow from 3.x to BI7

Hi,
We are doing a BI upgrade project from 3.x to 7. I have the following
query on data extraction from PSA to DSO and then to infocube after
migration of dataflow (Updaterules, transferules and datasource) from
3.x to BI7.
When I load data from PSA to DSO using DTP it is taking all the
requests data to DSO (all old requests data) instead of only new delta
request data. And also when i load from DSO to infocube same problem
is there (instead of taking only new delta request data, extracting
all dso active data).
Please suggest.
Best Regards,
SG

In BI 7, we dont have an option to run init without data transfer. So first time when you run a delta DTP it will work as full load and set init pointer. This is expected.
Case 1: If you have already loaded duplicate data into the data targets
a. If request is already compressed perform reverse posting. if not compressed then perform selective deletion based on the request.
b. Next deltas will work fine.
Case 2: Still not loaded
Follow the steps suggested by Luther Blake.
Thanks,
Hemanth

Query Migration from bw3.5 into BI7.0

Similar Messages

Maybe you are looking for