Query regarding the message being set for out of office in core reply body

Hi I am using this http://msdn.microsoft.com/en-us/library/office/hh532556(v=exchg.80).aspx for setting the automatic reply message out of office.
The issue i am facing is that newline characters seem to be ignored by ReplyBodyMessage property http://msdn.microsoft.com/en-us/library/office/exchangewebservices.replybody.message(v=exchg.150).aspx
Its replacing the new line chars with a space char. Is there some way around this of making message property accept newlines etc. 
Any sort of direction would be great help
Thanks
Madhur

You should be using HTML Markup if you want to put new lines in eg
OofSettings oof = service.GetUserOofSettings("[email protected]");
oof.ExternalReply = "test line 1<br>test line 2<br>test line3";
oof.State = OofState.Enabled;
service.SetUserOofSettings("[email protected]", oof);
Cheers
Glen

Similar Messages

  • Query regarding the People Tools installation for HRMS & Financials install

    Hi all,
    Greetings,
    After a lot of struggle, I was able to install Peoplesoft HRMS 9.1 on People Tools 8.50 ( had faced a lot of version conflict issues for almost 2 months after I was able to get up this). Now, the challenge is that the client wants me to install Financials (9.0/9.1) and Campus Solutions on the same machine. As such the Weblogic, Tuxedo etc have been installed already, I am unable to adjudge, if we need to install People Tools again, for every module in PeopleSoft ( I was told by one of my friends that for every module like HRMS, Campus Solutions, Financials of PeopleSoft we install, we need to install a subsequent PeopleTools as well, unlike, all of them using the same PeopleTools). Would greatly appreciate if you can help with any table/chart that helps with the version compatibility as well.
    Kind Regards,
    Vikram

    892175 wrote:
    1. This is how we setup the HRMS9.1 on Peopletools 8.50. We had request for a version of Peoplesoft HRMS9.1 compatible with PT 8.50 over the SR.I understand now.
    >
    Q.Please suggest us on below queries:
    a) Peoplesoft Financials 9.0 -- Which version of PT is compatible (to avoid upgrade of either application database or peopletools after we install & configure them)As far as I know, the application 9.0 was initially built on PT8.48 (to avoid PTools upgrade but quite old now).
    b) Peoplesoft Financials 9.1 -- Which version of PT is compatible (to avoid upgrade of either application database or peopletools after we install & configure them)The latest FSCM9.1 recut, feature pack March-2011, is available for download on edelivery only within Peopletools 8.51 (so, no upgrade necessary). But again, 9.1 application was initially built on 8.50 (SR required to request media).
    Most likely, you should go for the latest version appl/ptools to be able to upgrade as the easiest as possible if needed, or for starting project from scratch, try to keep the same version of components over your application and tools.
    Not sure where you want to go though and what is driving your decision.
    Nicolas.

  • Query regarding the fields details in particular form for all the users in

    Dear All,
                  I have one query regarding the fields details in particular form for all the users in company.
    Let take an exapmle if i had created Purchase Order having fields in content tab as 1.Item No. 2.Quantity 3.Unit Proce   4.Total   5. Location.
    While Login in User manager i set these fields only for Purchase order , but when i login from other user and open the similar purchase order the defaults fields are also seen including  above 4 fieds .
    Now my question is how to set the User choice fiels for the particular form that are common to all users.
    Means whenever i login in any user and opens the same document the same fields should be seen....Thanksssss.........

    You have to login with each and every user and do the Form Settings of every forms, so that all the forms look same for all the users.
    This is a manual job and you have do do it with every user login.
    Alternately, you can try out this link that explains
    [How to Copy One Screen Layout to Another User|http://www.sbonotes.com/2008/03/how-to-copy-one-screen-layout-to.html]

  • HT1212 My ipod is disabled and the message requests to try again in 223004 minutes.  I think it might have something to do with the date being set wrong before it went into disabled mode.  Can you assist in enabling.

    My ipod is disabled and the message requests to try again in 223004 minutes.  I think it might have something to do with the date being set wrong before it went into disabled mode.  Can you assist in enabling.

    You'll need to connect it to the iTunes library you normally sync it with and restore it.  If iTunes asks you for this passcode before it will let you proceed, connect the iPod to iTunes in recovery mode instead using the instructions in this Apple support document.
    iOS: Unable to update or restore
    B-rock

  • Query regarding the data type for fetcing records from multiple ODS tables

    hey guys;
    i have a query regarding the data type for fetcing records from multiple ODS tables.
    if i have 2 table with a same column name then in the datatype under parent row node i cant add 2 nodes with the same name.
    can any one help with some suggestion.

    Hi Mudit,
    One option would be to go as mentioned by Padamja , prefxing the table name to the column name or another would be to use the AS keyoword in your SQL statement.
    AS is used to rename the column name when data is being selected from your DB.
    So, the query  Select ename as empname from emptable will return the data with column name as empname.
    Regards,
    Bhavesh

  • How do i find out the answers i set for security questions?

    I cannot remember the answers i set for my security questions. Just need to know how i can find them out??

    The only way to recover from this is to reset your password using iForgot:
    https://iforgot.apple.com/
    It will send a temporary password to the email account associated with your Apple ID. Make sure it is an account that you can still access.
    The email is sent immediately. If you do not receive it immediately, check your spam folder or email service's Trash.

  • Change the Message class (OB28) for validations

    Hi Experts,
    I was trying to change the Message class (OB28) for validations which are created last 1 year ago, as we have two Validations where each validation has 15 to 16 steps in it. One validation starts with Y & another with Z.  Both are using the same message class as of now.
    But we want to use different message class for validation which starts from Z.  We tried changing from program RGUGBR28 but it will change the message class for the both validation which starts from Y & Z, we need to change to only one validation.
    Please let me know any way out for this.
    Thanks & regards,
    Shilpa

    Hi Shilpa,
    The message class during the maintenance of a validation, it is not changeable because the message class is not attached at the individual validation but at the entire validation class, that is a combination of application and call time.
    During the first creation of a validation at the moment of "document line item" in application "cost accounting" the message class is asked for and these then for the entire validation class, stored in this case "001" in the table GB02C and from now is no more changeable.
    The reason for that is, that a change affects all validation of a grade just globally and that even cross-client, since the GB02C is not client-specific.
    I hope this helps.
    Regards
    Ravinagh Boni

  • I have a brand new iPad newest version. Wifi. The messaging won't send out but I receive messages from others. What is wrong?

    I have the newest version of the iPad (3rd generation) with wifi. The messaging won't send out but I'm receiving messages from others when I'm using it. They also come through on my iphone at the same time. But I can't send them out on the iPad. I tried someone's suggestion of changing the DNS to 8.8.8.8 and that did not work to fix it. What is wrong with this thing?  Thank you in advance for your help.

    Are you trying to send a message to a cell number or an email address?  iPad does MMS, not SMS, meaning it can't send a message to a number.  It can send a message to an email address........

  • What is the best Compressor setting for best quality video playback on an iBook g4?

    I know the iBook and G4's in general are very outdated today, but I need to ask anyways. I have some video projects in 720p and 1080p in which I have down converted to 480p and also exported to MPEG-2 for DVD (personal wedding videos and videos made for my clients using Final Cut Studio). Anything encoded at most resolutions using h264 won't play on my iBook. Even 480p.
    I have about 20 hours of mixed video content that I need it in a format that is suitable for an iPhone 4 and an iBook 12" with a 1.2GHz G4, 1.25GB RAM and I added a 250 WD 5400 IDE hard disk (running 10.5.8 and 10.4.11 for Classic Mode). I know the iBook doesn't seem like the best tool for modern video playback, but I need to figure out which setting will play best with iPhone 4 and iBook so I don't need to make 2 local copies of each video for each device.
    The iBook plays best with the original DVD output MPEG-2 file and playing back in QT Pro or VLC... but I already have 180 GB's of MPEG-2 files now and my little HD is almost full. I don't have enough room to convert all the iPhone 4 counterparts. If I use Compressor 3.5.3, what is the optimal setting for iBook and iPhone .m4v or .mp4 files that can play on both devices? So far 720x400-480 widescreen videos @ 29fps works great on my iPhone, Apple TV 2, and other computers but seems to murder my poor iBook if encoded with high profile (and still choppy on simple profiles). 640x480 (adding black matte bars to my videos) plays fine in MPEG-2 but drops frames or goes to black screen if I convert it to mp4 (and looks bad on the iPhone 4 because of the matte). But if I convert on any of the simple profiles, it looks terrible on my iPhone 4 and a blocky on the iBook.
    This is the problem leading me to having 2 copies of each video and eating my hard disk space. What is the best video setting for both playback on the iBook and iPhone 4? Can the iBook playback H264 at all in decent resolutionsat all? I don't really want to have a 480p .m4v collection for the iPhone 4 and a MPEG-2 RAW collection just to play the same videos on the iBook.
    Any suggestions are greatly appreciated! Thanks!

    Update: The iBook can play any 480p video and higher if I encode them with DivX and in AVI format. But of course this is not compatible with my iPhone 4. At least I can shrink my library now and get away from the full MPEG-2s. I don't get why I can't use Apple's h264 though. There has to be a setting I am missing. The sample Apple h264 videos from the days of Tiger worked flawlessly on my iBook when it was new so the CPU must be capable of decoding it. I really can't understand this.
    Also, since I made my videos in English for my family, I had to create soft subtitles for my wife's Chinese family, and I can't get players like QT with perian or MPlayerX to sync them properly to an AVI encoded with DivX, they only sync well with the iPhone 4 m4v/mp4 formatted files I made. This is a real pickle.
    So now I may need three or four copies of each video, LOL. I need to hardcode the subtitles if I want to use AVI to playback on older machines, and keep the mp4 file for the iDevices too, while keeping higher quality h264 videos for my American relatives...
    If h264 is compatible with my iBook, what is the proper encoding settings? Must I dramatically lower the settings or frame rate? I can settle on 2 copies of each video that way. One iBook/G4/eMac compatible video that syncs correctly with my srt soft subs, and another version that works well with my iPhone 4 and iPad.
    All in all, I will end up with more than 3 or 4 version of each video. On my late G5 dual core I have the full 720-1080p uncompressed master files. On my i5 iMac I have the h264 compressed versions for distribution, and lower versions for my iDevices. Now I need to keep either full MPEG-2 files for the iBook to play, or convert to older formats like DivX AVI for our family's legacy machines. I am running out of hard disk space quick now, LOL.
    Is there an easier way?

  • Query regarding the conversion of DME file in MT940 format.

    Hello Experts,
    I have a query regarding the generation of MT940 file after generating the payment file from other DME tree.
    After completion of payment run, my payment file is generated in the DME format which is according to the DME tree.
    I want to convert the DME file (which is generated via F110)  from existing format to the standard MT940 format.
    Is there any standard program which converts the DME file to MT940. If so,  please inform me as early.
    I have tried to upload the DME file in FF.5 transaction, but it is not allowing me to convert the file in MT940 structure.
    Or please inform the steps how i can convert the file .
    Awaiting for your inputs.
    Thanks in advance

    Hi Zareena.
    I would like to suggest,
    SX_OBJECT_CONVERT_RAW_TXT.
    Hope that's usefull.
    Good Luck & Regards.
    Harsh Dave

  • How to Hold/Block the messages in PI for particular system

    Hi,
    I want to know the way of holding/blocking the message in PI for particular system. For other system message flow should happpened normally. My Scenario is,
    R3->PI->SRM. For connection between PI and SRM we are using proxy. We are going to upgrade our SRM system. During that time there should not be any message flow to  SRM. All the message needs to be blocked in PI. Once the upgrade over, we will restart all the messages.
    There are lot more system connected to PI. There should not be any interupt on that, message flow should happned normally for other system except SRM. Only the message going to SRM should be blocked.
    I found one way, by locking the user which used in communication channel for SRM system. So all the message will be failed in PI with Authentication error. After upgrade we can restart the message.
    Is there any other standard way to hold/block the messages which are going to particular system??
    Regards
    Baskaran K

    Hi,
    > I found one way, by locking the user which used in communication channel for SRM system. So all the message will be failed in PI with Authentication error. After upgrade we can restart the message.
    By locking user or giving wrong password to RFC destination in PI or by giving wrong business system in Receiver determination we can stop the messages in PI. But those failes messages are available for only few days in SXMB_MONI based on the BASIS settings.
    But I don't think this is the best way, we have other alternative is we can save those files in one folder, after upgrade by using some other scenario we can process the files.
    Regards,
    Venkata Ramesh

  • HT1386 I HAVE A PROBLEM WHEN SYNC CONTACTS IN MY COMPUTER TO IPHONE 4S after update to iOS6. The message are " waiting for change to be applied".

    I HAVE A PROBLEM WHEN SYNC CONTACTS IN MY COMPUTER TO IPHONE 4S after update to iOS6. The message are " waiting for change to be applied".
    PLAESE advise how to solve this problem.

    Hi applerinneedforhelp,
    Thanks for visiting Apple Support Communities.
    If iTunes is asking you to authorize the computer, and you've already done so, the troubleshooting steps in this article can help:
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/ts1389
    Regards,
    Jeremy

  • Query regarding the Node manager configuration(WLS and OAM Managed server)

    Query regarding the Node manager configuration(WLS and OAM Managed server):
    1) In the nodemanager.properties I have added the ListenAddress:myMachineName and ListenPort: 5556
    My setup : One physical Linux machine(myMachineName) has : WLS admin server, managed server(OAM 11G) and nodemanager.No clustered environment.
    2) nodemanager.log has the following exception when I start the oam_server1 using EM(Enterprise Manager11g):
    Mar 23 2012 1:39:55 AM> <SEVERE> <Fatal error in node manager server>
    java.net.BindException: Address already in use
    at java.net.PlainSocketImpl.socketBind(Native Method)
    at java.net.AbstractPlainSocketImpl.bind(AbstractPlainSocketImpl.java:336)
    at java.net.ServerSocket.bind(ServerSocket.java:336)
    at javax.net.ssl.impl.SSLServerSocketImpl.bind(Unknown Source)
    at java.net.ServerSocket.<init>(ServerSocket.java:202)
    at javax.net.ssl.SSLServerSocket.<init>(SSLServerSocket.java:125)
    at javax.net.ssl.impl.SSLServerSocketImpl.<init>(Unknown Source)
    at javax.net.ssl.impl.SSLServerSocketFactoryImpl.createServerSocket(Unknown Source)
    Default port on which node manager listen for requests is localhost:5556.I have changed it to point to my machine. The port should be of WLS admin server or it should be the managed server port?
    3) I have started the NodeManager using the startNodeManager.sh script.
    4) The admin server port is 7001 and the oam managed server port is 14100.
    Any inputs on what might be wrong in the setup will be helpful.Thanks !

    By using netstat -anp|grep 5556 you can check which process on your machine is using the 5556 port.

  • How to Modify the standard layout set for Sales Order

    Hi all,
    Do we have any sap defined standard to modify the sales order,if no How to Modify the standard layout set for Sales Order,an also plz send me the step by step procedure for the same.
    Thanks in advance
    Santosh R

    Hi, Dear Ferry Lianto,
    Thank you very much.
    Commonly I know the total pricing procedures.
    But, would you please tell me how to control the CURRENCY for the subitem of a condition type as follows?
    For example, I can see the following kind of
    contents in the Tab:condition of a sales order:
    PR00     Price     130.00000      TEST     100
         Gross Value     20.12      USD     100 <-how to
         Discount Amount     0.00      USD     100
         Rebate Basis     20.12      USD     100
         Net Value for Item     20.12      USD     100
         Net Value 2     20.12      USD     100
         Net Value 3     20.12      USD     100
    VPRS     Cost     27.22      HKD
         Profit Margin     16.61      USD
    The currency of PR00:price can be controlled via tcode VK12; but how to control the currency of its subitem such as gross value, discount amountm, net value for item, net value 2, & net calue 3...
    Thanks and regards.

  • Hello i buy itunes card and i have 12 but i can not buy the jewels of the game hay day when i try show me the message contact itunes for support your purchase could not be completed

    hello i buy itunes card and i have 12 but i can not buy the jewels of the game hay day when i try show me the message contact itunes for support <<your purchase could not be completed >> what can i do

    You will need to do what it says, contact iTunes Support. These are user-to-user support forums, if you thought you were contacting Apple by posting here. Go here:
    http://www.apple.com/emea/support/itunes/contact.html
    to contact the iTunes Store.
    Regards.

Maybe you are looking for