Question Regarding Delta Update.

HI
HI all Gurus...
I m new in BW i want to know tht if we have schedule delta for update in bw but if whenever detla is failed for any reason.then we must have to start from initial step..or we can start from thr whr it was stopped..and also give tell me tht in which cased detla will get failed....
Thanks in advc.

Hi,
When your delta load fails, delete that particular request which is in red from your data target and repeat the delta load again.
Causes for Delta load failure check below link:
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=causefordeltaloadfail&adv=false&sortby=cm_rnd_rankvalue
Regards,
KK.

Similar Messages

Few questions regarding the "Update CMS" button

Hello,
Few questions regarding the "Update CMS" button:
1. When I create new product at the SLD I see it at the add SC table even if I don't click the "Update CMS" button first. If so, when will I use this option?
2. When I do click the "Update CMS" button it takes it between 30-40 minutes to finish the update. During this time frame the whole development portal (it is sitting on the same WAS as the NWDI) becomes extremely slow. Is this normal response time or do I have a certain performance problem with my server?
Thank you in advance,
Roy

Hello Roy,
I think that <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/46/6fe3ec58f0477a816b80f182b389e0/frameset.htm">this</a> topic should answer all your questions :).
Hope that helps!
Jordan

Regarding Delta update for Standers Datasource

Hi Guys,
I am working in BI 7.0 environment with 3.x dasources. I have a datasource 0RPM_FI_DATA, I loaded full load first and now i am trying to do init beofre going to delta. But i am not INIT or Delta option in Infopackage screen. then i had look in the rsa6, Delta update option is not enabled for that datasouce.
So, Can anybody explain to me how can i make this Datasource as Delta enabled.
How can i do delta loads. For every clue, points will be awardable.
Thanks,
Suri.

seemingly this datasource is delta capable following the version of your xRMP version
RPM FI Data Extractor
Technical Name: 0RPM_FI_DATA
Use
This extractor is used to extract xRPM Financial integration attributes to the equivalent BW InfoSource Cost and Time Analysis (0RPM_COA_01). The extractor is a function based extractor of the source table rpm_fidata.
Technical Data
Application Components:
APCO_XAPPS_RPM
Available as from Release:
SAP xRPM 4.0
Shipment:
Content Version:
7.03
RemoteCube-Capable:
No
Delta-Capable:
Yes
Extraction from Archives:
No
Verifiable:
No
http://help.sap.com/saphelp_nw70/helpdata/en/16/039d1642004d479033f0f2a92fa86e/content.htm

Question regarding deltas and filling of setup tables

Hello Friends,
We are using the Sales Order Item Datasource 2LIS_11_VAITM. We have transported it to BI Production. We have initialized the delta and the deltas are running for the past 3-4 months.
Now we had a new requirement which was getting satisfied by the Sales Order Header and Sales Order Header Status DataSources, 2LIS_11_VAHDR & 2LIS_11_VASTH respectively.
Now we wan to transfer both these (header & header status) DataSources to BI Procution. My question is:
1) Do we have to refill the setup tables again in R/3 for the Sales (11) application?
2) Do we have to reload the entire Sales data again from scratch.
3) Is there any way to transport the 2 new DataSources to BI Production and without disturbing the already running deltas of Sales Order Item Datasource?
Regards,
Prem.

Hi,
1) Do we have to refill the setup tables again in R/3 for the Sales (11) application?.
Yes you need to refill the setuptables, because if you want to load deltas, you need to do Init then deltas, other wise first time when you are filled setup tables, (first load init with the existing data in setuptables) from that day to till date you can do full then you can set delta.
It is better and good to fill setup tables and load.
2) Do we have to reload the entire Sales data again from scratch.
Any way you need down time to load the other 2 datasources, and also for 11 application you are filling setuptables.So for perfectness it is better to load from first.
3) Is there any way to transport the 2 new DataSources to BI Production and without disturbing the already running deltas of Sales Order Item Datasource?
If you transport the new datasources then delta won't distrub in BW. If you did any changes to DataSource and trying to transport it to production then it will give error, because LBWQ and RSA7 will have data so first you need to clear it and then transport it.
Thanks
Reddy

Question Regarding Security Updates 2006-005 and 2006-006?

Okay I just noticed Apple Security Update 2006-005 and 2006-006 are available for download. Has anyone had any problems with these updates? I remember the Security Update 2006-001 was a nightmare for me -- Safari was broken after that update I had to do a complete OS reinstall then re-update to Mac OSZ 10.3.9 Panther and I only want to update if the likelihood of any problems occuring is very slim. Anyone running Mac OS X on PowerPC chips (i.e. using a PowerBook, an older iMac, Mac Mini, PowerMac etc) or on Intel chips (i.e. MacBook Pro, the new iMacs, new Mac Mini's etc) with Mac OS X Panther, Mac OS X Tiger etc having any problems with either update?

(10.3.9 Client) seems to have broken my CS2 Version Cue after loading Security Update 2006-006 via Software Update - 27MB or something.
Though afterwards all apps (Illustrator 12.0.1, Acrobat 7.0.8, PS 9.0.1 and InDesign 4.0.4) open and run fine, Version Cue disappeared from the Desktop Menu and System Preferences and says it's no longer installed, all this immediately after loading the Update and restarting.
Two restarts and a Repair Permissions haven't resolved the issue. I've downloaded the stand alone Update and have run that but without any luck. I'd had no history of any trouble with any Security Update prior to this, and have run good maintenance schedules.
I've not seen any other posts or related issues to mine, so maybe it's just my isolated event?

Question about Software Updates in the Netherlands

Hello all,
! am new to the Netherlands and plan to buy the Lumia 1020. I have a question regarding FW updates over here:
Which network delivers the fastest updates generally or does the un-locked (country specific) phone get it first?
Also, if i choose to buy the phone on contract here, after the expiry of the contract, do i have to unlock the phone or will the provider do it for me? (Assuming that the phones are locked to the network in the first place, if not, please let me know!)
PS: I come from India, where we don't have phones on contracts and also receive updates very quickly!

hi mate,
generally if you want to free yourself from the constraints of networks, your best bet is to purchase an unlocked, unbranded handset from in-store or online. bear in mind that if you buy a handset from origin of another country in the EU, the warranty will still apply, but buy a 1020 that has a product code from outside the EU, then the warranty won't apply. something to be careful about.
as for operators delivering updates faster than others, this varies between updates, and really noone is able to predict this. as for the unlocking, that is between you and your network carrier, Nokia has nothing to do with this.

I have a question regarding my txt/alert tones. I recently updated my iPhone 5's software without first backing it up on iCloud or my computer (oops). After my phone finished updating, i lost the new ringtones and txt/alert tones i had bought.

I have a question regarding my txt/alert tones. I recently updated my iPhone 5's software without first backing it up on iCloud or my computer (oops). After my phone finished updating, i lost the new ringtones and txt/alert tones i had bought. I connected my iPhone to my computer and sync'd it hoping that it could download my purchases from the itunes store and then put them back on to my phone but no such luck. When i look at my iphone on my computer and look at tones, they do not show up at all. However, if i click on the "On This iPhone" tab and click on "Tones" the deleted ringtones and altert tones show up...they are just grey'd out and have a dotted circle to the left of them. I also tried to go to the iTunes store on my phone and redownload them and it tells me that i have already purchased this ringtone and asks me if i want to buy it again. I press Cancel. I know when i do that with music it would usually let me redownload the song without buying it again but it wont let me with the ringtones...so how do i get them back? any help would be greatly appreicated

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

Question for delta loading, why can not update existing record in cube

Hi, Gurus,
I load data from a flat file into one infocube with delta loading option, and in the related datasource, i chose 'additive delta' option.
However after delta initial and delta update, when I checked cube content, I found that there are 2 records with the same characteristic value (just like duplicated key), and my expectation is to sum key figure with the same characteristic. Who can help me on that?
BTW: when I check delta queue, why there is not any queue?

Hi,
In uploading of flat file , If you are able to capture the changes to the previously loaded records, Then you can follow the additve delta. So it decreases the time of uploading .Only changed or new records will be uploaded every time.
If you are not able capture the changes in flat file ,Every time you have to do full upload ,Before this delete the contents of Infocube. (Assuming there is no ODS B/W Infocube and Flat file).
With rgds,
Anil Kumar Sharma. P

Delta update-Hierarchy Product

Hello,
Requirements
- prepare product hierarchy in a flat file (.csv)
- load the flat file into SAP-BW
Questions
Case-1: Add a new node
Case-2: Delete existing nodes
- Is there any delta update process to handle the change of hierarchy InfoObject without preparing the full data in the flatfile again?
I wonder if there anyone could share any idea about this topic.
Thank you very much.

Hi,
Check out the content of the infopackage, the tabstrip where you precise the name of the hierarchy to be loaded.
There, at the bottom of the screen, you can choose between : full update, insertion of nodes, updating the hierarchy.
I do not know if updating would mean suppression of the old nodes. Just give it a try.
Regards
Laurent
Message was edited by: Laurent THIBERT

Whole delta update process

Guys, it has been a great help from last 4-5 days for me. I never imagined it. Now the most important aspect is unclear to me. I have read a lot about delta update but it remains unclear to me.like
-R3 recompilation run
-setup table filling
-RSA7
-LBWE
-DELTA INITIALIZATION
-empty queue
please take time out and explain me the whole procedure via "queue delta update".
I have read a lot of links but still remain unclear. it will be big help.
kind regards
rajesh

Hi,
-setup table filling:
The Data in setup table is used in Delta initialization and full upload. Actually data comes from OLTP tables to Setup table in filling of setup table
http://www.sap-img.com/business/questions-answers-on-sap-bw.htm
-RSA7
The delta queue is a data store in the source system into which data records are automatically written using an update process in the source system (such as with FI documents) or using extraction using a function module after a data request from the BW (such as LIS extraction prior to BW 2.0).
With a delta request, the data records are transferred from the Scheduler into BW.
The data is stored in compressed form in the delta queue. It can be requested from several BW systems. The delta queue is also repeat enabled. In other words, the delta queue stores data from the last extraction process. The repeat mode of the delta queue is specific to the target system.
With changes to the extract structure for a DataSource that took place between writing the data into the delta queue and reading of the queue data (for example with an upgrade), you can see from the data stored in the queue in which structure it was written to the delta queue. The queue monitor now contains fields that are now field that were not filled before and/or fields that were filled before but which are now unfilled.
You can use this function to check the delta queue.
-LBWE - for LO cokcpit customizing
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/u/21406 [original link is broken] [original link is broken]
-DELTA INITIALIZATION
It is to set up for loading further delta's. Without init delta you cannot schedule an Extraction . If you have initialized a delta , You can get delta reocrds from the succesive run in the delta Queue
-empty queue - Tcode LBWQ
This is the T code(LBWQ) to check the Extraction q in LO. We know that there are 4 types of delta extraction that are available in LO. If you use Queued Deltaupdate method then the data moves to Extraction queue(LBWQ). Then run Collective update to move the data from LBWQ into Delta Queue (RSA7). Then schedule the data using the infopackage by selecting Delta Load in the update tab.
Roberto's weblog:
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
check this out...
LBWQ - T code is for what?
please take time out and explain me the whole procedure via "queue delta update".
Queued Delta:
In case of Queued delta LUW's are posted to Extractor Queue (LBWQ), by scheduling the V3 job we move the documents from Extractor queue to Delta Queue(i.e. RSA7) and we extract the LUW's from Delta Queue to BW side by running Delta Loads. Generally we prefer Queued Delta as it maintain the Extractor Log which us to handle the LUW's which are missed.
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
Hope it helps
Regards,
Malar B

Questions regarding customisation/configuration of PS CS4

Hello
I have accumulated a list of questions regarding customising certain things in Photoshop. I don't know if these things are doable and if so, how.
Can I make it so that the list of blending options for a layer is by default collapsed when you first apply any options?
Can I make it possible to move the canvas even though I'm not zoomed in enough to only have parts of it visible on my screen?
Is it possible to enable a canvas rotate shortcut, similar to the way you can Alt+RightClick to quickly change brush size?
Is it possible to lock button positions? Sometimes I accidentally drag them around when I meant to click.
Is it possible to lock panel sizes? For example, if I have the Navigator and the Layers panels vertically in the same group, can I lock the height of the navigator so that I don't have to re-adjust it all the time? Many panels have a minimum height so I guess what I am asking for is if it's possible to set a maximum height as well.
Is it possible to disable Photoshop from automatically appending "copy" at the end of layer/folder names when I duplicate them?
These are things I'd really like to change to my liking as they are problems I run into on a daily basis.
I hope someone can provide some nice solutions

NyanPrime wrote:
<answered above>
Can I make it possible to move the canvas even though I'm not zoomed in enough to only have parts of it visible on my screen?
Is it possible to enable a canvas rotate shortcut, similar to the way you can Alt+RightClick to quickly change brush size?
Is it possible to lock button positions? Sometimes I accidentally drag them around when I meant to click.
Is it possible to lock panel sizes? For example, if I have the Navigator and the Layers panels vertically in the same group, can I lock the height of the navigator so that I don't have to re-adjust it all the time? Many panels have a minimum height so I guess what I am asking for is if it's possible to set a maximum height as well.
Is it possible to disable Photoshop from automatically appending "copy" at the end of layer/folder names when I duplicate them?
These are things I'd really like to change to my liking as they are problems I run into on a daily basis.
I hope someone can provide some nice solutions
2. No. It's a sore spot that got some forum time when Photoshop CS4 was first released, then again with CS5. It's said that the rules change slightly when using full-screen mode, though I personally haven't tried it.
3. Not sure, since I haven't tried it. However, you may want to explore the Edit - Keyboard Shortcuts... menu, if you haven't already.
4. What buttons are you talking about? Those you are creating in your document? If so, choose the layer you want to lock in the LAYERS panel, then look at the little buttons just above the listing of the layers:
5. There are many, many options for positioning and sizing panels. Most start with making a panel visible, then dragging it somewhere by its little tab. One of the important features is that you can save your preferred layout as a named workspace. Choose the Window - Workspace - New Workspace... to create a new named workspace (or to update one you've already created). The name of that menu is a little confusing. Once you have created your workspace, if something gets out of place, choose Window - Workspace - Reset YourNamedWorkspace to bring it back to what was saved.
You'll find that panels like to "stick together", which helps with arranging them outside of the Photoshop main window.
As an example, I use two monitors, and this is my preferred layout:
6. No, it's not possible to affect the layer names Photoshop generates, as far as I know. I have gotten in the habit of immediately naming them per their usage, so that I don't confuse myself (something that's getting easier and easier to do...).
Hope this helps!
-Noel

I have some questions regarding setting up a software RAID 0 on a Mac Pro

I have some questions regarding setting up a software RAID 0 on a Mac pro (early 2009).
These questions might seem stupid to many of you, but, as my last, in fact my one and only, computer before the Mac Pro was a IICX/4/80 running System 7.5, I am a complete novice regarding this particular matter.
A few days ago I installed a WD3000HLFS VelociRaptor 300GB in bay 1, and moved the original 640GB HD to bay 2. I now have 2 bootable internal drives, and currently I am using the VR300 as my startup disk. Instead of cloning from the original drive, I have reinstalled the Mac OS, and all my applications & software onto the VR300. Everything is backed up onto a WD SE II 2TB external drive, using Time Machine. The original 640GB has an eDrive partition, which was created some time ago using TechTool Pro 5.
The system will be used primarily for photo editing, digital imaging, and to produce colour prints up to A2 size. Some of the image files, from scanned imports of film negatives & transparencies, will be 40MB or larger. Next year I hope to buy a high resolution full frame digital SLR, which will also generate large files.
Currently I am using Apple's bundled iPhoto, Aperture 2, Photoshop Elements 8, Silverfast Ai, ColorMunki Photo, EZcolor and other applications/software. I will also be using Photoshop CS5, when it becomes available, and I will probably change over to Lightroom 3, which is currently in Beta, because I have had problems with Aperture, which, until recent upgrades (HD, RAM & graphics card) to my system, would not even load images for print. All I had was a blank preview page, and a constant, frozen "loading" message - the symbol underneath remained static, instead of revolving!
It is now possible to print images from within Aperture 2, but I am not happy with the colour fidelity, whereas it is possible to produce excellent, natural colour prints using its "minnow" sibling, iPhoto!
My intention is to buy another 3 VR300s to form a 4 drive Raid 0 array for optimum performance, and to store the original 640GB drive as an emergency bootable back-up. I would have ordered the additional VR300s already, but for the fact that there appears to have been a run on them, and currently they are out of stock at all, but the more expensive, UK resellers.
I should be most grateful to receive advice regarding the following questions:
QUESTION 1:
I have had a look at the RAID setting up facility in Disk Utility and it states: "To create a RAID set, drag disks or partitions into the list below".
If I install another 3 VR300s, can I drag all 4 of them into the "list below" box, without any risk of losing everything I have already installed on the existing VR300?
Or would I have to reinstall the OS, applications and software again?
I mention this, because one of the applications, Personal accountz, has a label on its CD wallet stating that the Licence Key can only be used once, and I have already used it when I installed it on the existing VR300.
QUESTION 2:
I understand that the failure of just one drive will result in all the data in a Raid 0 array being lost.
Does this mean that I would not be able to boot up from the 4 drive array in that scenario?
Even so, it would be worth the risk to gain the optimum performance provide by Raid 0 over the other RAID setup options, and, in addition to the SE II, I will probably back up all my image files onto a portable drive as an additional precaution.
QUESTION 3:
Is it possible to create an eDrive partition, using TechTool Pro 5, on the VR300 in bay !?
Or would this not be of any use anyway, in the event of a single drive failure?
QUESTION 4:
Would there be a significant increase in performance using a 4 x VR300 drive RAID 0 array, compared to only 2 or 3 drives?
QUESTION 5:
If I used a 3 x VR300 RAID 0 array, and installed either a cloned VR300 or the original 640GB HD in bay 4, and I left the Startup Disk in System Preferences unlocked, would the system boot up automatically from the 4th. drive in the event of a single drive failure in the 3 drive RAID 0 array which had been selected for startup?
Apologies if these seem stupid questions, but I am trying to determine the best option without foregoing optimum performance.

Well said.
Steps to set up RAID
Setting up a RAID array in Mac OS X is part of the installation process. This procedure assumes that you have already installed Mac OS 10.1 and the hard drive subsystem (two hard drives and a PCI controller card, for example) that RAID will be implemented on. Follow these steps:
1. Open Disk Utility (/Applications/Utilities).
2. When the disks appear in the pane on the left, select the disks you wish to be in the array and drag them to the disk panel.
3. Choose Stripe or Mirror from the RAID Scheme pop-up menu.
4. Name the RAID set.
5. Choose a volume format. The size of the array will be automatically determined based on what you selected.
6. Click Create.
Recovering from a hard drive failure on a mirrored array
1. Open Disk Utility in (/Applications/Utilities).
2. Click the RAID tab. If an issue has occurred, a dialog box will appear that describes it.
3. If an issue with the disk is indicated, click Rebuild.
4. If Rebuild does not work, shut down the computer and replace the damaged hard disk.
5. Repeat steps 1 and 2.
6. Drag the icon of the new disk on top of that of the removed disk.
7. Click Rebuild.
http://support.apple.com/kb/HT2559
Drive A + B = VOLUME ONE
Drive C + D = VOLUME TWO
What you put on those volumes is of course up to you and easy to do.
A system really only needs to be backed up "as needed" like before you add or update or install anything.
/Users can be backed up hourly, daily, weekly schedule
Media files as needed.
Things that hurt performance:
Page outs
Spotlight - disable this for boot drive and 'scratch'
SCRATCH: Temporary space; erased between projects and steps.
http://en.wikipedia.org/wiki/StandardRAIDlevels
(normally I'd link to Wikipedia but I can't load right now)
Disk drives are the slowest component, so tackling that has always made sense. Easy way to make a difference. More RAM only if it will be of value and used. Same with more/faster processors, or graphic card.
To help understand and configure your 2009 Nehalem Mac Pro:
http://arstechnica.com/apple/reviews/2009/04/266ghz-8-core-mac-pro-review.ars/1
http://macperformanceguide.com/
http://www.macgurus.com/guides/storageaccelguide.php
http://www.macintouch.com/readerreports/harddrives/index.html
http://macperformanceguide.com/OptimizingPhotoshop-Configuration.html
http://kb2.adobe.com/cps/404/kb404440.html

Questions regarding creation of vendor in different purchase organisation

Hi abap gurus .
i have few questions regarding data transfers .
1) while creating vendor , vendor is specific to company code and vendor can be present in different purchasing organisations within the same company code if the purchasing organisation is present at plant level .my client has vendor in different purchasing org. how the handle the above situatuion .
2) i had few error records while uploading MM01 , how to download error records , i was using lsmw with predefined programmes .
3) For few applications there are no predefined programmes , no i will have to chose either predefined BAPI or IDOCS . which is better to go with . i found that BAPI and IDOCS have same predefined structures , so what is the difference between both of them .

Hi,
1. Create a BDC program with Pur orgn as a Parameter on the selection screen
so run the same BDC program for different Put organisations so that the vendors
are created in different Pur orgns.
2. Check the Action Log in LSMW and see
3.see the doc
BAPI - BAPIs (Business Application Programming Interfaces) are the standard SAP interfaces. They play an important role in the technical integration and in the exchange of business data between SAP components, and between SAP and non-SAP components. BAPIs enable you to integrate these components and are therefore an important part of developing integration scenarios where multiple components are connected to each other, either on a local network or on the Internet.
BAPIs allow integration at the business level, not the technical level. This provides for greater stability of the linkage and independence from the underlying communication technology.
LSMW- No ABAP effort are required for the SAP data migration. However, effort are required to map the data into the structure according to the pre-determined format as specified by the pre-written ABAP upload program of the LSMW.
The Legacy System Migration Workbench (LSMW) is a tool recommended by SAP that you can use to transfer data once only or periodically from legacy systems into an R/3 System.
More and more medium-sized firms are implementing SAP solutions, and many of them have their legacy data in desktop programs. In this case, the data is exported in a format that can be read by PC spreadsheet systems. As a result, the data transfer is mere child's play: Simply enter the field names in the first line of the table, and the LSM Workbench's import routine automatically generates the input file for your conversion program.
The LSM Workbench lets you check the data for migration against the current settings of your customizing. The check is performed after the data migration, but before the update in your database.
So although it was designed for uploading of legacy data it is not restricted to this use.
We use it for mass changes, i.e. uploading new/replacement data and it is great, but there are limits on its functionality, depending on the complexity of the transaction you are trying to replicate.
The SAP transaction code is 'LSMW' for SAP version 4.6x.
Check your procedure using this Links.
BAPI with LSMW
http://esnips.com/doc/ef04c89f-f3a2-473c-beee-6db5bb3dbb0e/LSMW-with-BAPI
For document on using BAPI with LSMW, I suggest you to visit:
http://www.****************/Tutorials/LSMW/BAPIinLSMW/BL1.htm
http://esnips.com/doc/1cd73c19-4263-42a4-9d6f-ac5487b0ebcb/LSMW-with-Idocs.ppt
http://esnips.com/doc/ef04c89f-f3a2-473c-beee-6db5bb3dbb0e/LSMW-with-BAPI.ppt
Reward points for useful Answers
Regards
Anji

I have read all the questions regarding the "Can't send photo using iMessage".

I have read all the questions regarding the "Can't send photo using iMessage". I followed everything and check everything that was in it. It's still the same. I am still not able to send a photo. It started happening last week. It was fine before that. There is no error message.
It will try to send but it will get stuck just before it sends
and the red ! will appear with the "Not Delivered" status.
When i tap on the !, it just says "This iMessage was not delived".
No other message or photo is sending as the same time as the photo.
I did reset it, I checked the email address, removed it as well. Turned it off then back on. Signed out and signed back in. Wi-Fi strength is very good. iOS is 6.0.1. I checked for updates, it is up-to-date I also checked a link http://support.apple.com/kb/TS2755. It did not help at all.
What's wrong?!?!?!?!

It is not a matter of reconsidering the decision. There are unsolveable technical problems with trying to run a program such as Firefox on Blackberry OS. We would need Blackberry to distribute a tool similar to Android's NDK to run on Blackberries.

Some questions regarding CO-PA

Hello Experts,
I have some questions regarding de COPA module:
1-Where can i find wich G/L accounts are assigned to a especific condition type? Is there any transaction where i can check the g/l accounts for the condition types?
2-I heard that the condition type VPRS is statistical, can anyone explain me this concept?..wich accounts are assigned to this condition type?
3-Does anyone has a list of the most relevat transactions for COPA? especially regarding the value flows and the closing.
Thnak you for your support!
Leandro.

Hi,
a) VKOA transaction
b) try reading this one: http://help.sap.com/erp2005_ehp_04/helpdata/EN/40/c52df80d1e11d2b5cf0000e82de856/frameset.htm Statistical means that the value in the CO-PA document for VPRS is also updated (truly) in other CO component. For example, revenue could be assigned truly to CO-PA segment and statistically to, let's say, cost centre. With material costs - it's the opposite.
c) most of the data is flowing to CO-PA from other modules. However, just go to the standard menu: the transactions for CO-PA are not so many.
Regards,
Eli

Question Regarding Delta Update.

Similar Messages

Maybe you are looking for