Quicktime Audio Disappears after Publishing

Hi -
I'm using iWeb 09; I have long been using iWeb to publish my website - part of that has been uploading mp3 files for people to listen to.
My problem is suddenly my files, which play perfectly in iWeb, don't even show up on the page after I publish it. Previously, when the page first loaded, the Quicktime symbol would appear under the image placeholder until the file loaded and then you could play it. Now, after waiting, there is nothing but the image placeholder.
For the life of me, I cannot figure this out. It is this way on Firefox; Safari 4 shows an Quicktime sybmol with a question mark (both on my Mac), and on a PC with IE7 it doesn't show up at all.
I've searched here and across the web and cannot find anyone else who has encountered this problem. Please help!
an example page is www.newlifelaurel.cc/podcasts_20090920am.html
Message was edited by: jacobfrank406

Welcome to the Apple Discussions. Is the podcase link right below this graphic or is the graphic?
Click to view full size
If so make sure the graphic is not overlapping the QT file.
OT

Similar Messages

Quicktime Thumbnail missing after publishing

I'm using iWeb '09 3.0.1. to build my website. I've got lots of quicktime videos. I used the Inspector to select a thumbnail for my Quicktime clips, but after publishing the clips just start in black. I've had this problem since I first built the site last year. I thought with the latest version of iWeb it would be resolved. No go. I'm having other issues like most of the videos not publishing, but I'm going to try a clean publish later tonight after I delete all the current files and folders from the host site. In the meantime, any suggestions on the thumbnails?
Thanks,
Erik

Erik:
As Roddy pointed out others have had problems with the poster frame feature in the Inspector/Quicktime pane. What's the URL of your site so we can see first hand what you're referring to.
There are alternative methods of adding a QT file to a page that might work for you. See this demo page: Opening Item in a New, Precisely Sized Window. This demo page has 8 videos on it using that method: PhotoPresenter Animated Slideshow Themes.
OT

Audio error after publishing or while previewing a project

I have a very large project with branching. When either previewing or publishing (to flash), I have a section of slides that do not play their own audio, but rather, play audio from another part of the course. This happens for 5 slides in a row, the project seems to right itself.
When I preview the affected slides alone, they play as expected and I don't have any other audio files attached to any elements on the page. The minute I try to view the entire project seems to be when the error comes up.
I am using Captivate 4, and the audio is created using the text-to-speech option. I've cleared out all unused audio files
Thanks for your help!

Thanks for the reply!
I already had some gap between the start of the slide and the audio files. I went ahead and made the audio start after the slide had been going .5 seconds, but unfortunately I still have the same problem.
I've recreated the slides and deleted the ones that were giving me problems and the problem is now fixed. That wouldn't have been fun if it were many more slides to rebuild.

Captivate 3 audio problems after publishing...

Help please... having problems with audio getting messed up after publishing. I'm recording all audio w/in Captivate3. When I publish and put on our browser, the audio is missing on some slides, also if you pause for FF the video, the audio sometimes is overlaping, or not in sync. Any suggestions?
Thank you
Bev

Hey Luke,
I apologize for not getting back sooner, been swamped at work and I'm
moving. OK here is my laundry list of bugs and nice to haves:
   - BUG - If I add silence to the beginning or end of a wavelength, it
   gets cut off when I save and close the wavelength. I then have to reopen
   the wavelength and add it back in and save it again. If I don't add silence
   the audio gets cut off when I publish. This has to be done for every slide
   I have and it's very repetitive.
   - BUG - If I create a movie over say 45 slides, the slides bleed into
   one another and images are lost or added to the next slide. If I use Fade
   for the transition it's even worse.
   - BUG - If I use Fade for a transition between slides with characters
   the characters bleed from one slide to the next.
   - NICE TO HAVE - The ability to set Preferences for characters per
   project or for all projects. For example, set the size and duration
   defaults.
   - NICE TO HAVE - It would be nice to have the default tab on the audio
   wavelengths be Edit not Add or Replace. I do a lot of narrating so having
   to click Edit for each slide becomes tedious.
OK, I want to be clear that I'm not beating up Adobe programmers and I do
LOVE the tool. It would just be a smoother experience if the above worked
or were in place. I do also have to add that I love all of the new widgets
and games!!! Haven't had time to explore them all, but I will soon and I'll
let you know more when I do. BTW are you sharing these email threads with
Adobe? Maybe we should put this online, what do you think?

Why does my audio disappear after I publish my videos to a MPEG in Elements 8?

I'm using Elements 8 and my video looks and sounds find until I publish it. When I publish it as an MPEG, the video is there, but the audio is gone. What should I do?

Post a screen shot of your share settings
https://forums.adobe.com/thread/1070933 for screen shot instructions

Audio Disappears After Export

I've come across a bug that's occurred twice to me in the past 3-4 months. When exporting a sequence out of Premiere Pro, the resulting file loses some of its audio. Here are the details:
A section of 10 minutes of audio towards the end of the project disappear in the resulting .mov QuickTime file
Export settings are
I cannot get the problem to reoccur after it has happened. It seems to be at random.
The first time this issue occurred, I used H.264 as the codec. So I know that does not fix the issue.
Both times I have sent the sequence to Adobe Media Encoder for export.
Here is a screenshot of the project, showing that everything in the audio mixer window is fine, as well as individual tracks in the timeline. I've set in/out points over the section that disappeared in the export. The green audio track in this area is the audio that was missing, the disabled clip above it is scratch audio and is supposed to be disabled.
Can anyone help me figure out why this issue has occurred? Both times it has happened have been in critical scenarios where the file needs to work (one being a backup in case our satellite feed has issues, and this most recent time it happened on our television broadcast without me knowing until after).

Hi Codyn,
I'm really not sure. And it sounds like it is not easily repeatable. Can you file a bug report? Here is the link: http://adobe.ly/ReportBug
Thanks,
Kevin

Double playback of audio files after publishing

Hello,
I'm having an issue with audio playback. Once I publish the project, the audio files play back double, with the second one starting about 3 seconds after the first. If I pause the project, one of the audio files keeps playing. I removed the auto play function, but no change. I would greatly appreciate any tips if anyone has experienced this before.
Thank you!

Hi Anjaneai, Thanks for the response.
I don't have any text captions in this project, the entire thing is from PowerPoint, where the audio files worked perfectly fine. I also checked the use count, everything reads as "1"... I also tried to begin from scratch with just one slide and one audio file, and the same thing happened. I'm beginning to think my audio files are corrupted. (However, they play fine in itunes and powerpoint). I converted them from mp4 > mp3 with an online converter... might just be the problem! I'm going to download a trial of premier and see what happens with that!
Thanks for the help,
Jaime

PPro CS4 All Audio Disappeared after Adding WAV File

I cannot hear audio in a video I am editing in Premiere Pro CS4 (Win 7 pc). Problem began after I tried to record my voiceover (wav file) using PPro CS4. I saved videos from a digital camera, converted to QuickTime format, imported and was able to listen to both the audio that was originally part of the video and three voiceover files that I previously recorded using different software (I don't remember what). Now I cannot hear audio of any files, wav, wma, etc, using PPro CS4, Windows Media Player, or other software. Any suggestions of what I should do to restore audio to my system?
fwalkatl

Bill:
Thanks for your quick reply. Unfortunately, this is a self-inflicted wound. It turns out I caused the problem by plugging my microphone into the headphone jack. After checking to confirm that my sound card driver is up to date, I glanced at the jack, placed the mike in the proper input port, and voila, I've got sound. I'm back editing my video in CS4. Based on this escapade, I'm sure I will need your advice again soon.
fwalkatl

Quicktime not playing after publishing page

I have a 13MB .mov quicktime which plays fine not only in iWeb and on its own, but plays when I put it loose in the Site folder and direct the browser to it, however when I add it to my site via iWeb and then publish, it shows up with a question mark over the quicktime. All my other movies with the same format play just fine, except for this one:
http://web.mac.com/jamin.duncan/iWeb/Site/BestBuy_Holiday4.html
if you remove the /BestBuy_Holiday4.html which is the iWeb html file and add /BBY_Pickup.mov it will play fine.
It's driving me crazy. Any ideas?
Thanks.

I think my problem may be related.
I have all the latest versions of everything.
I used iWeb to create and publish my site, took a week of trying with repetitive errors, finally successful.
However, some of the videos on my website only show a big blue "Q" with a question mark inside, and cannot play the video. The other videos show a "TV screen" with the beginning of the video displayed, I can click play and they play. But the problem of some videos just showing the "Q" confuses me. Thoughts?
I read the suggestion to look inside the Media folder to see if the movie file is there, but I don't know what this si or where to find it!
Kevin

Itunes wont install--disappears after "publishing product information"

Hello,
When I install itunes, it will reach "publishing product information" and then suddenly disappear. I have read the posts, disabled my firewall, and looked at the support articles online--none of which have resolved my issue.
Do you have any suggestions?

hi Katrina!
IF you are running DCOMCNFG to fix something, does that mean you got an error 1607?
here's what i think is going on with this poor chap.
our "publishing product quit"/1607 KB doc got revised on 31 january 2006:
iTunes for Windows installation quits while publishing product information
... and there's now an alternate set of treatment possibilities given in there for XP home users. people are being linked to the DCOM settings tip over at InstallShield:
Configure the DCOM Settings on Your Computer
so i think here that our OP has a "publishing product information" quit version of this problem, and followed up on that link, which is why DCOMCNFG got mentioned.
love, b

All audio disappears after exporting to .mov file

I'm creating a short 'montage' piece, and all audio is muted except for a song which I added into the timeline. I've tried exporting it several times, even replacing the source file for the song, but nothing seems to work. The audio is visible and playing in the timeline, but as soon as I export it, it magically disappears.
Any suggestions?

Adding to Russ's comments and questions: if you are exporting a file, you get to choose to export only audio, only video or both. Check your setttings in that regard; to complicate matters, this setting sometimes does not stick (a known bug in 10.0.8). If that is the case, the usual workaround is to change some other parameter, make an export (which you can cancel), then go back to the export panel and change it back.

IMovie 11 - Export Using Quicktime - File Disappears after Export......

Hey everyone:
I've got a weird one here. I've made my first project using iMovie. I want to burn a DVD, so I clicked >>Share >> iDVD and it comes over fine. I then setup a menu and stuff and burned it. However, when I play it on my 52" plasma, it doesn't fit correctly. It fills the screen, but it's almost like it's zoomed in so it cuts off of ALL edges.
So I did some research and found this post and went to try it out. So within iMovie, I click "share using Quicktime" and change some of the various settings and export the movie as a Quicktime (.MOV) file to my "Movies" folder. The movie is about 55 minutes, it says it'll take about 35 minutes to export.
35 minutes later I come back and the export box has closed, iMovie is still open, just like it should be, and the file I just exported is nowhere to be found. It just disappears. The second and third time I tried, I open a Finder window and watch the file get created, then get larger, and larger. But once it's done, the file is gone.
So then I created a new project and made a movie that was only 10 minutes long. It exports fine and the file is there when it's done. In other words, I can't replicate the problem with a new project. However, I have a lot of time in editing this movie and don't want to start over for fear of finding the same result.
What should I do?
Thanks!

I have this same problem and there are several threads running about it. I have the paid-for version of iMovie, and cannot even get it to export a Quicktime movie. This makes it even more useless than I already find it to be. I spent the last two days working on a video, and for me to send it to my client, I would have to freight my computer to them so they could view it.
<Edited by Host>

Audio disappears after first half hour

I burned a 60 minute tv show in iDVD, which plays and sounds fine in preview, but when you play the burned dvd, the audio is gone from about the 35 minute mark on (picture fine, last 25 minutes of audio missing) Any ideas???

Hi
May be there is some help here:
*Not knowing the origin to Your problem - General approach when in trouble is as follows:*
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Hard disk is untidy: Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Delete iDVD pref file - *or rather start a new user/account* - log into this and re-try
• Program miss-match: iDVD 5.0.2, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK - DON’T work under Leopard
• Program miss-match: iDVD 6.0.4, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
• Program miss-match: iDVD’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
• iDVD (08) v7 Locate theme folder. Move out iDVD1, iDVD 2 and eventually iDVD4 folders to desktop - re-try
• Try a Cleaning CD/DVD that cleans the laser lens on the DVD burner/player
iDVD 6.0.4 and iDVD 7.0.1 are compatible with Mac OS X 10.5 Leopard
iDVD pref file resides: Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences and is named:
com.apple.iDVD.plist
While iDVD is NOT RUNNING - move this file out to desk-top.
Now restart iDVD.
Last resort: from Craig: Solved the problem!! Finally!!
I deleted every iDVD application and folder from my boot drive,
emptied the trash and then installed iDVD 08 using the customize option
and I am up and running.
Yours Bengt W

Audio disappears after going backwards 10 slides

I have 2 Captivate projects with 30 slides each and mp3 audio on all slides. The audio is imported To Slide. The slide does not advance after the audio finishes. The user needs to use a forward button in the navigation. Everything works fine moving forward. But if the user starts clicking backwards through the presentation the audio will stop playing after the 10th slide. And it doesn't matter where you start moving backwards. It could be slide 30, slide 23 etc. But after 10 slides the audio no longer plays. This problem seems to only happen with HTML5 output. Flash output doesn't seem to have the problem. Of course, our client wants to use HTML5.
Any ideas?

OK, I finally got around to testing my project and it does the same thing. This is a pretty serious issue if there is no work around. I'll log a bug.

Audio "disappears" after resuming VLC

Hi,
I'm on a fully updated Arch-X86_64/XFCE laptop connected via HDMI to a large screen TV.
I watch Full HD movies this way, preferably using VLC.
I have tried several ALSA/PULSE combinations with VLC's (advanced) Audio configuration output/device.
In all these audio "combinations", if I pause VLC, many times (but not always!), I have NO sound after resume.
Searching the Internet, the solution seems to be installing vlc-plugin-pulse.
However, I can't find it neither in the repositories nor in AUR.
Please advise!
Thanks

Does the same happen with using alsa directly? (hw:0 for example, PA would need to be killed for that probably)

Quicktime Audio Disappears after Publishing

Similar Messages

Maybe you are looking for