Quicktime Error -50 on every share intent

Hi!
I'm having troubles when trying to export a movie from a Final Cut Pro X timeline. I always use Share/Apple Devices or Share/Send to Compressor. I always get the same error after a while: Quicktime error -50
Does anyone have a clue?
Thanks!
PS: I don't know if it can be a problem, but I have both installed in my iMac 27"

Ok, hafken, I exported with "Export Media" option (wich never existed in FCP before, it was "Export Quicktime Movie" before) and it worked, then I opened it with Compressor and it could export with Vimeo Setting.
Thanks everyone for your help, but now, my question is: is this happening just me? How do you think I can solve this so that I can export without all this detour?

Similar Messages

  • Final Cut Pro X share fails with QuickTime Error -50

    Hello!
    I'm facing a very annoying issue when trying to share my project from Final Cut Pro X. It used to work perfectly fine but now I'm getting consistently "QuickTime Error -50" after FCPX exported about 10% of my project. This can be reproduced with other project as well - one time I was able to export by restarting my machine but not anymore.
    My configuration is a Mac Pro early 2008 with a ATI Radeon 5770. The only recent change I did to my config was to upgrade my old graphic cards to the Radeon 5770: do you think this can be the cause of this error?
    Thanks for any help,
    Jean

    I am also expriencing the same error. Tried every solution listed so far:
    1. Switch off background rendering. Trash render files. Don't render. Export.
    2. copying the project within Final Cut Pro into another project
    3. remove the following folder: Library > Application Support > ProApps > MIO > RADPlugins > XDCAMFormat.RADPlug
    Nothing worked. I try to export to Vimeo, YouTube, and master. All error right at 9%
    What's going on?

  • How to fix: the share operation master file has failed quicktime error: -50

    So Whenever i export my HD 1080p file in FCPX 10.0.8 i get this error "the share operation master file has failed quicktime error: -50"
    Please help!!!!
    It happens about 12% of the way in. My movie is only 10 minutes long.

    Download it. Quit FCPX. select FCPX in this tool and and click on trash. Restart FCPX and try again to export. Empty trash. It will do no harm but you have to set your settings in preferences in FCPX after that. Every application has preferences files and they can become corrupt. FCPX will build new fresh preferences after you open it.

  • Help! I am getting: Quicktime error -50...when trying to use the "Share" and "Send to Compressor" function. I need to export my show! Thanks for your suggestions! (using FCP7)

    Help!  I am trying to export my show and commercials from the timeline. Both Share and Send to compressor are not working.
    Its starts compressing then I get Failed"Quicktime Error -50". I appreciate any suggestions.
    SYSTEM INFO
    Model Name:          Mac Pro
      Model Identifier:          MacPro5,1
      Processor Name:          Quad-Core Intel Xeon
      Processor Speed:          2.4 GHz
      Number Of Processors:          2
      Total Number Of Cores:          8
      L2 Cache (per core):          256 KB
      L3 Cache (per processor):          12 MB
      Memory:          10 GB
      Processor Interconnect Speed:          5.86 GT/s
      Boot ROM Version:          MP51.007F.B00
      SMC Version (system):          1.39f11
      SMC Version (processor tray):          1.39f11

    First try exporting a self-contained movie from FCP, the using the resulting file in Compressor.  To do it, go to File->Export->QuickTime Movie (do NOT use QuickTime Conversion).  In the export window, check the self-contained option but do not "recompress all frames."
    Once the export is finished, launch Compressor then use the self-contained file as the source.  If that fails, you may want to try using theis: http://www.digitalrebellion.com/compressorrepair/
    -DH

  • The Share Operation has failed: QuickTime Error: -50

    I just updated to FCP X 10.0.8 and all of the sudden I am getting share errors when I attempt to export.  I have tried sharing to youtube and sharing for apple devices at 1280px X 720px using H.264 codec.  Each time I get a quicktime error: -50.
    I am editing on a Mac Mini 2.7 GHZ Intel i7.  8GB memmory OS 10.8.3.  The video files are AVCHD 1920x1080 24fps and live on an external 6 tb GTech Raid external hard drive.
    So far, I have tried deleting both my project file's render files and event render files.  I have copied the project to a new project and re-rendered.  Each time, I am seeing that several tiny little segments are showing as un-rendered (orange bars above clip on timeline).   I'm guessing that this might have something to do with the error?
    I am not using any images and the music I am using is an AIFF file.  I re-timed some of the clips for slow motion.
    When I try to share as "export file" > Video and Audio > Apple Pro Res 422 at 1920 x 1080 I get "The share operation Export File has failed" The operation could not be completed because an error occurred when creating frame 1403 (error - 1).  But I'm not sure how to view frame numbers.
    Any help would be appreciated.  Thank you.

    I've tried deleting all the render files several times and it doesn't work. 
    Interestingly enough, when I copy the bad clips individually to a new project and then export them, they export just fine.  They do not have the weird orange render bars. 
    Check out this link to see a screenshot of my timeline.
    I'm not sure if my clips are optimized.  My import preferences have the "create optimized media" checkbox checked, but when I actually imported the files, I did not check the "create optimized media" checkbox.  Although, on my hard drive there is a folder for transcoded media > high quality media and it has some clips in there, including the bad clips.  So I guess it created optimized media?  Is there another way to tell if a clip has been optimized.
    Here is a screenshot of my preferences.
    Here are my project properties.

  • The share operation Blu- ray has failed. quicktime Error: 0

    the share operation Blu- ray has failed. quicktime Error: 0 anyone any idea how i overcome this ?

    Are you working with native media? If you are, see if Final Cut will let you transcode a clip to Pro Res 422. Do an export test with that single clip. (Write the output to a disk image so you don't waste a disk.)
    Russ

  • Share operation dvd has failed QuickTime error 0

    My 44 minutes long project in Final Cut Pro 10.0.9 project fails with a message: "Share operation DVD has failed, QuickTime Error: 0". I use OSX 10.9.
    Yesterday, I rectified the situation by rebooting the system and starting to "share" again. To-day made a few extra corrections here and there but  nothing simple works. I even removed the background photo from the DVD opening menu but no success :-((
    Ross's earlier advice on this forum was:
    "Select a short section of your project and export as a Pro Res master file.
    If that also fails, turn off BG Rendering; delete project render files; copy the entire Timeline to a new project.
    Russ"
    Could you please be more specific. I am a novice to FCP.
    1.How to select a short section ? Select 4-5 frames (yellow band) from the timeline ?
    2. How to _export_ as a ProRes file ? From File > Share > Master File (default) ? (Or if it has to be an "export" perhaps File >Export XML ?)
    3. How and where to turn off BC Rendering ?
    4. How to delete project render files ?    File > "Delete Project Redner Files" is not highlighted in the File menu, so how to select this action ?
    5. How to copy the entire Timeline into a new project ?  File >New Project ? Then select the whole of the old timeline, copy > paste into the new timeline ? Or a different method ?
    I think that it is better to ask even some simple (for experts) questions  ? :-)
    Many thanks,
    Kris

    1) Either use the Range tool or set in and out points on the Timeline.
    2) Either way will work. For example, Share>Master File and choose Pro Res in the Settings>Video Codec field.
    3) Background Rendering can be turned off in Preferences.
    4) Select the project in the Project Library first.
    5) Create a new project with settings to be determined automatically by first clip. In the original project, Command-A and then Command-C. Open the new project, click in the Timeline window to activate and hit Command-V.
    Good luck.
    Russ

  • HT4740 i already did the Hidding part and later moved the events and projects to the FCP events and projects folder . I still cannot share - keep getting this message "THE SHARE OPERATION 1080P FOR APPLE DEVICES (10 MBPS) HAS FAILED. Quicktime Error -50

    i already did the Hidding part and later moved the events and projects to the FCP events and projects folder . I still cannot share - keep getting this message "THE SHARE OPERATION 1080P FOR APPLE DEVICES (10 MBPS) HAS FAILED. Quicktime Error -50
    I dont know what else to do to be able to share my project - I know i updated FCPX before i shared this project  but i dont know what im doing wrong

    masterpieces wrote:
    later moved the events and projects to the FCP events and projects folder .
    Can you explain in detail what you did?
    Do any other shsre destinations complete? If not, do you get the same error message?

  • HT201197 how do i fix this (the share operation DVD has failed Quicktime error 0

    Ho w do i fix this - The share operation DVD has failed Quicktime error 0

    Select a short section of your project and export as a Pro Res master file.
    If that also fails, turn off BG Rendering; delete project render files; copy the entire Timeline to a new project.
    Russ

  • Problem when exporting to Vimeo I get message "The share operation has failed. Quicktime error: -50" The file only gets to 8% before this happens any idea how to fix I have a movie deadline to meet!

    Hi all,
    Finished editing a short movie.
    Then went to share on vimeo but got this message - see also screenshot when I tried to export to desktop.
    Problem when exporting to Vimeo I get message "The share operation has failed. Quicktime error: -50" The file only gets to 8%.
    Have tried deleting my render files for the project and also another fix mentioned of deleting any black space files on the edit itself but neither work?
    Just upgraded to OS Mavericks could this be causing it? If so how to downgrade?
    thanks
    Louis B

    Thanks for your help both, I called Apple tech support and spoke to a really helpful chap called Andrea who helped me out. Now got my Master file sorted and am trying Vimeo upload again.
    Just to clarify points for people out there with the same issue:
    First steps
    - Ensure background rendering is turned off in preferences
    - Delete project and events render files
    - If upgraded to Mavericks then go to FCPX in finder under applications hit buttons 'CMD' and 'I' together and tick the 'prevent App Nap' box.
    Next Steps
    I had already done all of this when Apple Tech spoke to me so we discussed the message 'Quicktime -50' and what it meant. It wasnt a purely generic error message but was not detailed enough to point to one specific issue. This problem had occurred in previous years (so Mavericks not wholly to blame) and patches were issued over the years by Apple to help resolve some of the problems.
    The message essentially is indicating that there is a problem somewhere with the media in some way shape or form.
    My export went to 8% then failed. Apple's answer was that the project settings were corrupted in some way.
    So what they suggested (so simple I could kick myself) was to select all the media files by 'CMD + A' then copy them 'CMD + C' then create and open a new project timeline, and then paste in 'CMD + V'.
    Then we tried export again this time to a master file with some settings detailed by Apple.
    The difference now was it got to 40% then failed but due to a different reason 'error -1 frame 10124 error'
    At last we get past the project issues and into the event media issues, it seems that when I loaded the compact flash last night, the iMac kept ejecting the reader so had to copy files over quickly and seems that some of the file clip I used although showed on the viewer, didn't seem to have loaded all the correct media, so selecting this clip frame 10124 on the viewer I found that it showed as red on the frame row which implied an issue. So I simply bladed it off and deleted it.
    Then I reran the export to Master file and it worked, though jumping from 40% to 100% complete was a shock to me!
    Now am trying the export to Vimeo - hope this helps some of you out there. Worst case pick up the phone to Apple and speak to the Final Cut Pro guys they can help.
    best wishes,
    Louis B

  • HT1338 QuickTime Error: 2

    The share operation Master File has failed
    Share command- final cut pro x - master export - error QuickTime Error: 2. ?????

    I've just got this error to.
    After trying to figure out what I had done wrong, I shut every thing down.
    When I booted up again I found that the Sound track pro and FCPX and Safari were still open, so I forced quit and shut down again.
    This time when I booted up nothing was still open so I opened FCPX and tried again.
    Every thing back to normal.
    Hope this helps anyone out.
    Regards,
    Wiggy.

  • Quicktime error 0 with compressor

    Every time I try to export a sequence from FCP 5.0.2 using compressor I get an error when it tries to export the video saying "quicktime error 0" also when I try to export as a quicktime movie, I get a message saying "general error" im running compressor 2.0.1
    any help is greatly appreciated
    thanks
    ~jon

    Udate:  The contained Quicktime file that I exported from FCPX rendered fully with no errors in Compressor, so I guess I"m in the clear, but I think this was an unnecessary extra step.  Its a mystery why I was getting the error when sending the render to Compressor from within FCPX. 
    Anyone else that has this issue, please share any solutions if you have them.

  • Export keeps failing: QuickTime error 0

    Still having problems exporting my video. I've tried Share/DVD... to hard drive, and exporting from Compressor with DVD settings, and every time, the audio exports fine, and the video starts - but at some point it fails with a QuickTime error 0.
    I tried deleting some of the layered parts of the video, thinking that perhaps that was causing the problem, but unfortunate
    Y that wasn't it.
    Anyone know what might cause that error?  I'm beginning to think I'm going to have to rebuild the whole film :-(
    Thanks
    David

    Im have the same problem as well. Did you guys ever figure out how to resolve the issue?
    It seems like this error came up alot in previous versions of fcp, and it was tied to currupt/missing render files or missing mpeg2 components. I think the error is a bit different for fcpx. Ive tried everything I can think of as well.
    Thanks,
    Carlton
    Project is 1080p - 1 Hour:45 - from canon dslr

  • Quicktime Error:0 with Compressor 4

    Here's what I'm working on:
    Mac Pro Quad-Core
    16gb RAM
    Mac OSX 10.7.5
    I"m exporting from FCPX 10.0.7 to Compressor 4.  I have an 82 minute timeline.  When Compressor opens, I select the standard DVD presets for mpeg2 video and ac3 audio.  The audio file renders fine, but the video files fails and I get this error- "Failed: Quicktime Error: 0"  
    When importing every source file, I have optimized media selected.  Any ideas whats causing this? 

    Udate:  The contained Quicktime file that I exported from FCPX rendered fully with no errors in Compressor, so I guess I"m in the clear, but I think this was an unnecessary extra step.  Its a mystery why I was getting the error when sending the render to Compressor from within FCPX. 
    Anyone else that has this issue, please share any solutions if you have them.

  • Quicktime error -2048 when trying to play.mov files.

    I have been frustrated this weekend trying to find a solution to a problem that has only recently occurred accessing some digitised VCR tapes that had been archived on an external HDD. These are files that played back fine on my Quicksilver after I had recorded them, but now give a "Movie Not Available" message in Quicktime. However when opened in VLC I get a debug message box with the following information posted below. Any clues as to what might be the problem?
    I recorded the files from my VCR using an ADVC-100 DA converter over firewire into BTV Pro which created .mov files (DV-PAL). When I try to open the files in BTV Pro, I get a message box "There was an error opening the movie. No Movie found. Error code 20,-2048" Did a search for this error and -2048 appears to be a Quicktime error, so am wondering if there is a problem with my installation of Quicktime. I have got all the usual suspects in stalled, Flip4Mac, Perian, VLC. Mpeg Streamclip but can't get the file to open. The external HDD is Mac formatted but I found some info about problems with missing resource forks in older .mov files causing problems if copied to NTFS HDD's.
    Any ideas as to where to look next will be appreciated.
    +main debug: CPU has capabilities AltiVec FPU+
    +main debug: looking for memcpy module: 2 candidates+
    +main debug: using memcpy module "memcpyaltivec"+
    +main debug: thread started+
    +main debug: thread 26421248 (Interaction control) created at priority 0 (../../src/interface/interaction.c:382)+
    +main debug: Creating an input for 'Media Library'+
    +main debug: Input is a meta file: disabling unneeded options+
    +main debug: `file/xspf-open:///Users/irdesigns/Library/Preferences/VLC/ml.xspf' gives access `file' demux `xspf-open' path `/Users/irdesigns/Library/Preferences/VLC/ml.xspf'+
    +main debug: creating access 'file' path='/Users/irdesigns/Library/Preferences/VLC/ml.xspf'+
    +main debug: looking for access module: 3 candidates+
    +access_file debug: opening file `/Users/irdesigns/Library/Preferences/VLC/ml.xspf'+
    +main debug: using access module "access_file"+
    +main debug: TIMER module_Need() : 26.549 ms - Total 26.549 ms / 1 intvls (Avg 26.549 ms)+
    +main debug: Using AStream*Stream+
    +main debug: pre-buffering...+
    +main debug: received first data for our buffer+
    +main debug: creating demux: access='file' demux='xspf-open' path='/Users/irdesigns/Library/Preferences/VLC/ml.xspf'+
    +main debug: looking for demux module: 1 candidate+
    +playlist debug: using XSPF playlist reader+
    +main debug: using demux module "playlist"+
    +main debug: TIMER module_Need() : 19.485 ms - Total 19.485 ms / 1 intvls (Avg 19.485 ms)+
    +main debug: `file/xspf-open:///Users/irdesigns/Library/Preferences/VLC/ml.xspf' successfully opened+
    +main debug: looking for xml module: 2 candidates+
    +main debug: using xml module "xml"+
    +main debug: TIMER module_Need() : 99.281 ms - Total 99.281 ms / 1 intvls (Avg 99.281 ms)+
    +playlist debug: parsed 0 tracks successfully+
    +main debug: removing module "xml"+
    +main debug: EOF reached+
    +main debug: control type=1+
    +main debug: removing module "playlist"+
    +main debug: removing module "access_file"+
    +main debug: TIMER input launching for 'Media Library' : 71.406 ms - Total 71.406 ms / 1 intvls (Avg 71.406 ms)+
    +main debug: thread started+
    +main debug: waiting for thread initialization+
    +main debug: thread 25213440 (preparser) created at priority 0 (../../src/playlist/thread.c:79)+
    +main debug: thread started+
    +main debug: waiting for thread initialization+
    +main debug: thread 26413056 (fetcher) created at priority 0 (../../src/playlist/thread.c:108)+
    +main debug: thread started+
    +main debug: waiting for thread initialization+
    +main debug: rebuilding array of current - root Playlist+
    +main debug: rebuild done - 0 items, index -1+
    +main debug: thread 26417152 (playlist) created at priority 0 (../../src/playlist/thread.c:117)+
    +main debug: looking for interface module: 1 candidate+
    +main debug: using interface module "hotkeys"+
    +main debug: TIMER module_Need() : 48.316 ms - Total 48.316 ms / 1 intvls (Avg 48.316 ms)+
    +main debug: thread started+
    +main debug: thread 25212416 (interface) created at priority 0 (../../src/interface/interface.c:168)+
    +main debug: looking for interface module: 17 candidates+
    +main debug: using interface module "signals"+
    +main debug: TIMER module_Need() : 34.354 ms - Total 34.354 ms / 1 intvls (Avg 34.354 ms)+
    +main debug: thread started+
    +main debug: thread 26470400 (interface) created at priority 0 (../../src/interface/interface.c:168)+
    +main: Running vlc with the default interface. Use 'cvlc' to use vlc without interface.+
    +main debug: looking for interface module: 4 candidates+
    +main debug: using interface module "macosx"+
    +main debug: TIMER module_Need() : 511.368 ms - Total 511.368 ms / 1 intvls (Avg 511.368 ms)+
    +main debug: thread started+
    +main debug: thread 26482176 (interface) created at priority 0 (../../src/interface/interface.c:148)+
    +main debug: no fetch required for Playlist (art currently (null))+
    +main debug: adding item `testing.mov' ( /Volumes/IR My Book/BTV Videos ƒ/testing.mov )+
    +main debug: rebuilding array of current - root Playlist+
    +main debug: rebuild done - 1 items, index -1+
    +main debug: starting new item+
    +main debug: processing request item testing.mov node Playlist skip 0+
    +main debug: resyncing on testing.mov+
    +main debug: testing.mov is at 0+
    +main debug: creating new input thread+
    +main debug: Creating an input for 'testing.mov'+
    +main debug: waiting for thread initialization+
    +main debug: thread started+
    +main debug: thread 26771456 (input) created at priority 22 (../../src/input/input.c:370)+
    +main debug: `/Volumes/IR My Book/BTV Videos ƒ/testing.mov' gives access `' demux `' path `/Volumes/IR My Book/BTV Videos ƒ/testing.mov'+
    +main debug: creating demux: access='' demux='' path='/Volumes/IR My Book/BTV Videos ƒ/testing.mov'+
    +main debug: looking for access_demux module: 2 candidates+
    +main debug: no fetch required for Playlist (art currently (null))+
    +macosx debug: input has changed, refreshing interface+
    +macosx debug: notification received in VLC with name VLCOSXGUIInit and object VLCEyeTVSupport+
    +main debug: no fetch required for Playlist (art currently (null))+
    +main debug: TIMER module_Need() : 1288.828 ms - Total 1288.828 ms / 1 intvls (Avg 1288.828 ms)+
    +main debug: creating access '' path='/Volumes/IR My Book/BTV Videos ƒ/testing.mov'+
    +main debug: looking for access module: 8 candidates+
    +vcd debug: trying .cue file: /Volumes/IR My Book/BTV Videos ƒ/testing.cue+
    +vcd debug: could not find .cue file+
    +access_file debug: opening file `/Volumes/IR My Book/BTV Videos ƒ/testing.mov'+
    +main debug: using access module "access_file"+
    +main debug: TIMER module_Need() : 110.747 ms - Total 110.747 ms / 1 intvls (Avg 110.747 ms)+
    +main debug: Using AStream*Stream+
    +main debug: pre-buffering...+
    +main debug: received first data for our buffer+
    +main debug: pre-buffering done 1408981 bytes in 0s - 9031 kbytes/s+
    +main debug: creating demux: access='' demux='' path='/Volumes/IR My Book/BTV Videos ƒ/testing.mov'+
    +main debug: looking for demux module: 59 candidates+
    +mp4 debug: found Box: mdat size 32+
    +mp4 debug: skip box: "mdat"+
    +mp4 debug: found Box: mdat size 18891508192+
    +mp4 debug: skip box: "mdat"+
    +mp4 debug: dumping root Box "root"+
    +mp4 debug: | + mdat size 32+
    +mp4 debug: | + mdat size 1711639008+
    +mp4 debug: file type box missing (assuming ISO Media file)+
    +mp4 error: MP4 plugin discarded (no moov box)+
    +avformat debug: detected format: mov,mp4,m4a,3gp,3g2,mj2+
    +avformat error: avopen_inputstream failed+
    +lua debug: Trying Lua scripts in /Users/irdesigns/Library/Preferences/VLC/lua/playlist+
    +lua debug: Trying Lua scripts in /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist+
    +lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/anevia_streams.lua+
    +lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/appletrailers.lua+
    +lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/bbccouk.lua+
    +lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/break.lua+
    +lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/canalplus.lua+
    +lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/cue.lua+
    +lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/dailymotion.lua+
    +lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/france2.lua+
    +lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/googlevideo.lua+
    +lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/joox.lua+
    +lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/koreus.lua+
    +lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/lelombrik.lua+
    +lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/megavideo.lua+
    +lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/metacafe.lua+
    +lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/youtube.lua+
    +lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/youtube_homepage.lua+
    +lua debug: Trying Lua scripts in /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/share/lua/playlist+
    +ps error: cannot peek+
    +vobsub debug: could not read vobsub IDX file+
    +dummy error: unknown command `/Volumes/IR My Book/BTV Videos ƒ/testing.mov'+
    +subtitle debug: subtitle demux discarded+
    +main warning: no demux module matching "mp4" could be loaded+
    +main debug: TIMER module_Need() : 1954.294 ms - Total 1954.294 ms / 1 intvls (Avg 1954.294 ms)+
    +main error: no suitable demux module for `/:///Volumes/IR My Book/BTV Videos ƒ/testing.mov'+
    +main debug: finished input+
    +main debug: dying input+
    +main debug: removing module "access_file"+
    +main debug: thread ended+
    +macosx debug: input has stopped, refreshing interface+
    +macosx debug: addition to non-blocking error panel received+
    +main debug: dead input+
    +main debug: thread 26771456 joined (../../src/playlist/engine.c:244)+
    +main debug: TIMER input launching for 'testing.mov' : 3573.150 ms - Total 3573.150 ms / 1 intvls (Avg 3573.150 ms)+
    +main debug: starting new item+
    +main debug: changing item without a request (current 0/1)+
    +main debug: nothing to play+
    +main debug: no fetch required for Playlist (art currently (null))+

    Well it used to work fine so I think so. When I try and run the installer you linked to I get a message saying that a later version is already installed- isn't it built into the latest QT releases? One thing I thought of- the original files I think were made on a mac so there were some resource fork files of 4K size. I deleted these as I kept trying to open them by mistake, but then after this trouble I dragged them back out the trash to the original location but it didn't fix the problem- could that have caused some sort of association problem?

Maybe you are looking for