Quicktime problems from a new member

Hi All.
Please forgive my ignorance - I have searched for answers but have had no luck.
I have a few discs which I'm unable to play because, I'm told, they contain Flash content embedded within Quicktime. I have Quicktime 7.4.5 installed and I believe the last version which supported Flash was 7.1.3.
Some have suggested installing an earlier version but I can see that would be fraught with problems.
Has anyone any sensible suggestions or fixes please?
Thanks
Paul

There is no way to play Flash (swf) content within QuickTime anymore as it's been disabled. Any applications that depend on this functionality no longer work either.
Message was edited by: Kyn Drake

Similar Messages

Problem with add new Member in Account Dimension

Hi Expert
I want to add new member in account dimension but occured some Error about a member count of a circular reference. Please help me for solve this error. Thank you so much
Best regards,
Bank

Hi,
This kind of error indicates faulty dimension formulas. There must be at least 2 formulas referencing each other. For example:
1. A=B+C
2. C=A*D
The above 2 formulas are dependent on each other. On one hand, you need C to calculate A. On the other hand, you need A to calculate C. So, causing a cross reference. Try to remove all the dimension formulas in your account dimension and process it. See, if its successful or not. If yes, then the formula was the definite reason. Now, try to add the formula one by one, till you get the error.
Hope this helps.

Hello from a new member and help with random images on refresh

Hi All,
I've just joined the forum. In fact I've really only just started to use Dreamweaver. I've covered a lot of ground in the last few weeks and
have manage to set up a basic site using CSS for layout but now I've hit my first problem.
On the index page of the site - http://www.hcadesign.co.uk/ there is a large main image which I would like to change each time someone
visits the site or hits refresh. I've hunted around and found lots of scripts, all using java, that seem to do just this but I'm not having any
luck getting them to work.
My pages code is as follows -
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Humphrey Cook Associates - Architects - Interior Designers - Project Managers</title>
<link href="styles/hca_styles.css" rel="stylesheet" type="text/css" media="screen" />
</head>
<body>
<div id="wrapper">
<div id="header"><img src="images/header.gif" width="800" height="100" alt="hca_header" /></div>
<div id="menu">
    <ul>
      <li>About Us</li>
      <li>Residential </li>
      <li>Special Needs Housing</li>
      <li>Hotels</li>
      <li>Conservation</li>
      <li>Interiors</li>
      <li>Offices</li>
      <li>Sustainability</li>
      <li>Commercial</li>
      <li>News</li>
      <li>Contact</li>
    </ul>
</div>
<div id="main_image"><img src="images/haydock_atrium_420x300.jpg" width="420" height="300" alt="haydock_atrium" />
</div>
<div id="menu_right">
    <h3>Latest News</h3>
    <p>Planning permision finally granted for the proposed 'Villa De France'</p>
    <div id="news_image_01">
      <p><img src="images/news_villa_de_france_90x50.jpg" alt="villa_de_france" width="90" height="50" /></p>
    </div>
    <p>Application submitted for new 30 storey hotel with retail in Tower Hamlets</p>
    <div id="news_image_02"><img src="images/news_alie_St_90x50.jpg" width="90" height="50" alt="alie_street" /></div>
</div>
<div id="spacer"></div>
<div id="bottom_left"><img src="images/riba_logo_127x67.gif" width="127" height="67" alt="riba_logo" /></div>
<div id="bottom_thumb_01"><img src="images/thumb_beckton_95x67.jpg" width="95" height="67" alt="beckton" /></div>
<div id="bottom_thumb_02"><img src="images/thumb_edgeworth_link_95x67.jpg" width="95" height="67" alt="edgeworth" /></div>
<div id="bottom_thumb_03"><img src="images/thumb_tov_bathroom_95x67.jpg" width="95" height="67" alt="haydock" /></div>
<div id="bottom_thumb_04"><img src="images/thumb_edgeworth_interiors_portrait_95x67.jpg" width="95" height="67" alt="the_old_vicarage" /></div>
<div id="bottom_right">
<h1>Architects</h1>
<h1>Interior Designers</h1>
<h1>Project Managers</h1>
</div>
<div id="footer"></div>
</div>
</body>
</html>
I've highlighted where the image to be rotated is in red.
The scripts I've found have generally involved putting something in the <head>, something where the image is to be (but I wasn't sure if it should be
within the div tag or after img src or what?) and also a seperate *.js file stored in the root directory.
Anyway I'm not getting anywhere and need some help as I really don't know what I'm doing with javascript.
Cheers

Hi and Welcome to the DW Forums.
For the sake of clarity, Java is not the same thing as JavaScript. 2 entirely different programming languages.
Copy and paste the following code into a new, blank HTML page.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<title>Random Banner</title>
<script type="text/javascript">

</script>
</head>
<body>
<h1>Random Banner on Page Load.</h1>
<p>The more images you have in your array, the more random it will seem.</p>
<p>Change the URLs from example.com to your your own site pages.</p>
<p>Change path/image to images in your local site folder.</p>
</body>
</html>
Good luck with your project,
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web-design.blogspot.com/

Quicktime Problems on my new Mac pro!

I cannot get any of my video files to play back in Quicktime Pro 7.1.2!
The video files that will not play back are using the HDV codec as well as DVCPRO HD.
I have FCStudio installed. My files work fine in FCP..... BUT why not QT?
I never had this problem on my previous G5.
Thanks!
-Doug

Thank you Sam.
I tried solution 1 and 2.
The Logo from CC is back on my desktop, but again in the desktop App there is a download problem.
Are you sure that solution 3 from helpx.adobe.com is the only option?
Thanks again for your help.
joke

Greetings from a new member !!!

Hello to everyone on the board.
I'm a new owner of a T400 and have been following the board before purchase and infact used it as an important tool for the judgement process. All of this are completely meant as high praise and thank you all for helping though indirectly.
Now some guidance would be welcome as to the services and processes that're essential to the system. One step further is how to get optimal battery usage out of this system without stopping too much and what ?. System specs are given below and I'm an engineering student who desperately needs all the computing power I can get out of this.
Please correct or guide me as I'm completely new to the forum process and only lived so far with company supplied and maintained hardware.
Frustrating questions from me like " so how do I actually do that " are sure to follow. Thanks for reading
G.
T400
2764CTO
Vista Business 64
4GB
T400 P9500 4GB
Vista Business 64
LED screen 6-Cell

Hello Genel,
Congratulations for your new T400 !
My personal suggestion to you - please make Rescue and Recovery CD's to save your "fresh and perfectly working" system enivronment for future. I am using ThinkPad for some years and that kind of system copy could be helpful in your future.
Regards,
Janek
T42p 2737ZLG, Win XP Pro
Janek
T42p 2737ZLG, Win XP Pro

Some tips when you got problem.- from a new joiner side

The purpose of this thread is want to find a way to resolve the tech problem.
Firstly,definition your problem's type:
1.ABAP grammar questions or ABAP language questions.
     Pls type in Transaction Code : ABAPDOCU
     There are much of sample codes they will show you how to use ABAP,SQL,Internal Table and so on.
     I think it can help most of your problems like this.
     Otherwise, pls go to the ABAP expert's seat and ask for him help.
2.BAPI problem:
     This should be the nightmare of the each ABAP programmer.Since there are hundreds of thousands of BAPI.Which should be the best one to solve your      problem?And each BAPI has so much parameters,it maybe makes you confused.Definitely it will.
     So how to do?
     1.Locate the right BAPI you need to use.
     Serveral method to find the BAPI.
          1.From the BAPI Explorer. You can find most of the standard BAPI by category and alphabetical.
          2.Debug the Tcode that SAP GUI provide,then find the BAPI that the GUI launced,it should be the right one.
               Just type in "/h" before you type in the Tcode,and you will be get into the debug mode.Then you will find the backend BAPI it uses.
          3.Search the FM by the key words.Such as type "BPCreate*" in the SE37.
     2.Define the right parameters.
          Yes, this is the most difficult one.Because SAP's documents are so little.And it is not enough to tell us how to use this BAPI, even you know which BAPI is the right one. So ,my experiences is :
          1. Read the document first if it has.Although these documents are so brief,however it provide some of the basic informations.It should help.
          2.Search the used list, find out where this BAPI has been used before.Just click here:
          Usually, here should be somewhere that called this BAPI:
          Then double click the line, and the codes will be there.Sometimes the sample code helps you a lot.
          3.Debug the FM,and call the BAPI manually.Just click "Excute" in the FM itself. A Gui will show up to let you fill in the parameters.
            It is boring to try every parameters out,however, if the parameter is not huge, it works.It can save time for you.
          4.Search the SAP forum, to seek if there any experiences of the other guys.Since there are so many devleopers do the same job as you in the whole world, every error you got should has been resolved by the others.So don't worry about that.
          5.If the method above did not work, Congratulations, it is time for you to upgrade your ABPA level.You should to buy some lottery.
            What's the most interesting things of the programming?? Debug !!
           Just go through the BAPI code line by line, and keep eyes on the watch point.It is a period to improve your skills.
          However, this method will pay you much of time.
At last,here is some ABPA devleopment resources:
SAP Forum:
http://www.sdn.sap.com   A good forum to post your requests , it is a fast way to get problem resolved as far as you put your requestion in right board.Maybe ,you need to search the forum first with your BAPI name,your error message.Mostly, the problem you got must has been happened to the others.So they will help you.
One of my experiences is , when I got problem with update address, a developer from SAP Lab helped me a lot.Indeed, it is him who wrote the BAPI I use.
So don't hesitate to ask questions. You are not doing the research job, any questions pls feel free to let others know.It should save time for you and the project
Code Repository:
Tcode : ABAPDOCU

hi
good
Nice thing post in a right place.
Thanks
mrutyun^

Ann: SuperReport - a new member from Super 1.7

Announcement: Super 1.7 - an EJB/J2EE monitoring tool with
SuperEnvironment
SuperLogging
SuperPeekPoke
SuperStress
has got a new member: SuperReport
You can anomyously down load it free from:
http://www.acelet.com.
Super is a component based administration tool for EJB/J2ee.
It provides built-in functionality as well as
extensions, as SuperComponents. Users can install
SuperComponents onto it, or uninstall them from it.
Super has the following functions:
* A J2EE/EJB monitor.
* A gateway to EJB servers from different vendors.
* A framework holding user defined SuperComponents.
* A PeekPoke tool to read/write attributes from EJBs.
* A full-featured logging/tracing tool for centralized, chronological logging.
* A Stress test tool.
* A global environment tool.
* A report tool.
It is written in pure Java.
The current version support:
* Universal servers.
* Weblogic 5.1, 6.0
* Weblogic 6.1 with EJB 2.
What is new:
Version 1.70 January 2002
Enhancement:
1. SuperLogging: Scope can dynamically change both for upgrade to downgrade (for
weblogic 6.1, need download an application).
2. Add alias names for log threshold as new Java suggests.
3. New component: SuperReport.
Change:
1. SuperLogging: Log database parameters are specified in a properties file, instead
of EJB's deployment descriptor. It is more convenient and it avoids some potential
problems. No change for development, easier for administration.
Bug fix:
1. Add Source Path Panel now accepts both directory and jar file.
2. Bug in SuperEnvironment example (for version 1.60 only).
Version 1.60 December 2001
Enhancement:
1. SuperPeekPoke and SuperStress can use user defined dynamic argument list.
2. Add timeout parameter to logging access.
3. New installation program with A). Easy install. B). Remote command line install.
4. Support EJB 2.0 for Weblogic 6.1.
5. Support SuperPeekPoke, SuperEnvironment and SuperStress for Websphere 4.0 (SuperLogging
was supported since version 1.5).
Change:
1. Poke: argument list is set at define time, not invoke time.
2. Default log database change to server mode from web server mode, booting performance
to 10-20 times.
Bug fix:
1. If the returned object is null, Peek did not handle it correctly.
2. If the value was too big, TimeSeries chart did not handle it correctly. Now
it can handle up to 1.0E300.
3. Help message was difficult to access in installation program.
4. Source code panel now both highlights and marks the line in question (before
it was only highlight using JDK 1.2, not JDK 1.3).
5. Delete an item on PeekPoke and add a new one generated an error.
Version 1.50 August, 2001
Enhancement:
1. Source code level tracing supports EJB, JSP, java helper and other
programs which are written in native languages (as long as you
write correct log messages in your application).
2. Redress supports JSP now.
3. New installation with full help document: hope it will be easier.
4. Support WebSphere 4.0
Version 1.40 June, 2001
Enhancement:
1. Add SuperEnvironment which is a Kaleidoscope with TableView, TimeSeriesView
and PieView for GlobalProperties.
GlobalProperties is an open source program from Acelet.
2. SuperPeekPoke adds Kaleidoscope with TableView, TimeSeriesView and PieView.
Changes:
1. The structure of log database changed. You need delete old installation and
install everything new.
2. The format of time stamp of SuperLogging changed. It is not locale dependent:
better for report utilities.
3. Time stamp of SuperLogging added machine name: better for clustering environment.
Bug fix:
1. Under JDK 1.3, when you close Trace Panel, the timer may not be stopped and
Style Panel may not show up.
Version 1.30 May, 2001
Enhancement:
1. Add ConnectionPlugin support.
2. Add support for Borland AppServer.
Version 1.20 April, 2001
Enhancement:
1. Redress with option to save a backup file
2. More data validation on Dump Panel.
3. Add uninstall for Super itself.
4. Add Log Database Panel for changing the log database parameters.
5. Register Class: you can type in name or browse on file system.
6. New tour with new examples.
Bug fix:
1. Redress: save file may fail.
2. Install Bean: some may fail due to missing manifest file. Now, it is treated
as foreign beans.
3. Installation: Both installServerSideLibrary and installLogDatabase can be worked
on the original file, do not need copy to a temporary directory anymore.
4. PeekPoke: if there is no stub available, JNDI list would be empty for Weblogic5-6.
Now it pick up all availble ones and give warning messages.
5. Stress: Launch>Save>Cancel generated a null pointer exception.
Changes:
1. installLogDatabase has been changed from .zip file to .jar file.
2. SuperLogging: If the log database is broken, the log methods will not try to
access the log database. It is consistent with the document now.
3. SuperLogging will not read system properties now. You can put log database
parameters in SuperLoggingEJB's deployment descriptor.
Version 1.10 Feb., 2001
Enhancement:
1. Re-written PeekPoke with Save/Restore functions.
2. New SuperComponent: SuperStress for stress test.
3. Set a mark at the highlighted line on<font size=+0> the Source Code
Panel (as a work-a-round for JDK 1.3).</font>
4. Add support for WebLogic 6.0
Bug fix:
1. Uninstall bean does physically delete the jar file now.
2. WebLogic51 Envoy may not always list all JNDI names. This is fixed.
Version 1.00 Oct., 2000
Enhancement:
1. Support Universal server (virtual all EJB servers).
2. Add Lost and Found for JNDI names, in case you need it.
3. JNDI ComboBox is editable now, so you can PeekPoke not listed JNDI name (mainly
for Envoys which do not support JNDI list).
Version 0.90: Sept, 2000
Enhancement:
1. PeekPoke supports arbitrary objects (except for Vector, Hashtable
and alike) as input values.
2. Reworked help documents.
Bug fix:
1. Clicking Cancel button on Pace Panel set 0 to pace. It causes
further time-out.
2. MDI related bugs under JDK 1.3.
Version 0.80: Aug, 2000
Enhancement:
1. With full-featured SuperLogging.
Version 0.72: July, 2000
Bug fix:
1. Ignore unknown objects, so Weblogic5.1 can show JNDI list.
Version 0.71: July, 2000
Enhancement:
1. Re-worked peek algorithm, doing better for concurent use.
2. Add cacellable Wait dialog, showing Super is busy.
3. Add Stop button on Peek Panel.
4. Add undeploy example button.
Bug fix:
1. Deletion on Peek Panel may cause error under JDK 1.3. Now it works for both
1.2 and 1.3
Version 0.70: July, 2000
Enhancement:
1. PeekPoke EJBs without programming.
Bug fix:
1. Did not show many windows under JDK 1.3. Now it works for both 1.2 and 1.3
Changes:
1. All changes are backward compatible, but you may need to recompile monitor
windows defined by you.
Version 0.61: June, 2000
Bug fix:
1. First time if you choose BUFFER as logging device, message will not show.
2. Fixed LoggingPanel related bugs.
Version 0.60: May, 2000
Enhancement:
1. Add DATABASE as a logging device for persistent logging message.
2. Made alertInterval configurable.
3. Made pace for tracing configurable.
Bug fix:
1. Fixed many bugs.
Version 0.51, 0.52 and 0.53: April, 2000
Enhancement:
1. Add support to Weblogic 5.1 (support for Logging/Tracing and
user defined GUI window, not support for regular monitoring).
Bug fix:
1. Context sensitive help is available for most of windows: press F1.
2. Fix installation related problems.
Version 0.50: April, 2000
Enhancement:
1. Use JavaHelp for help system.
2. Add shutdown functionality for J2EE.
3. Add support to Weblogic 4.5 (support for Logging/Tracing and
user defined GUI window, not support for regular monitoring).
Bug fix:
1. Better exception handling for null Application.
Version 0.40: March, 2000
Enhancement:
1.New installation program, solves installation related problems.
2. Installation deploys AceletSuperApp application.
3. Add deploy/undeploy facilities.
4. Add EJB and application lists.
Change:
1.SimpleMonitorInterface: now more simple.
Version 0.30: January, 2000
Enhancement:
1. Add realm support to J2EE
2. Come with installation program: you just install what you want
the first time you run Super.
Version 0.20: January, 2000
Enhancement:
Add support to J2EE Sun-RI.
Change:
1. Replace logging device "file" with "buffer" to be
compliant to EJB 1.1. Your code do not need to change.
Version 0.10: December, 1999
Enhancement:
1. provide SimpleMonitorInterface, so GUI experience is
not necessary for developing most monitoring applications.
2. Sortable table for table based windows by mouse
click (left or right).
Version 0.01 November., 1999:
1. Bug fix: An exception thrown when log file is large.
2. Enhancement: Add tour section in Help information.
Version 0.00: October, 1999
Thanks.

Announcement: Super 1.7 - an EJB/J2EE monitoring tool with
SuperEnvironment
SuperLogging
SuperPeekPoke
SuperStress
has got a new member: SuperReport
You can anomyously down load it free from:
http://www.acelet.com.
Super is a component based administration tool for EJB/J2ee.
It provides built-in functionality as well as
extensions, as SuperComponents. Users can install
SuperComponents onto it, or uninstall them from it.
Super has the following functions:
* A J2EE/EJB monitor.
* A gateway to EJB servers from different vendors.
* A framework holding user defined SuperComponents.
* A PeekPoke tool to read/write attributes from EJBs.
* A full-featured logging/tracing tool for centralized, chronological logging.
* A Stress test tool.
* A global environment tool.
* A report tool.
It is written in pure Java.
The current version support:
* Universal servers.
* Weblogic 5.1, 6.0
* Weblogic 6.1 with EJB 2.
What is new:
Version 1.70 January 2002
Enhancement:
1. SuperLogging: Scope can dynamically change both for upgrade to downgrade (for
weblogic 6.1, need download an application).
2. Add alias names for log threshold as new Java suggests.
3. New component: SuperReport.
Change:
1. SuperLogging: Log database parameters are specified in a properties file, instead
of EJB's deployment descriptor. It is more convenient and it avoids some potential
problems. No change for development, easier for administration.
Bug fix:
1. Add Source Path Panel now accepts both directory and jar file.
2. Bug in SuperEnvironment example (for version 1.60 only).
Version 1.60 December 2001
Enhancement:
1. SuperPeekPoke and SuperStress can use user defined dynamic argument list.
2. Add timeout parameter to logging access.
3. New installation program with A). Easy install. B). Remote command line install.
4. Support EJB 2.0 for Weblogic 6.1.
5. Support SuperPeekPoke, SuperEnvironment and SuperStress for Websphere 4.0 (SuperLogging
was supported since version 1.5).
Change:
1. Poke: argument list is set at define time, not invoke time.
2. Default log database change to server mode from web server mode, booting performance
to 10-20 times.
Bug fix:
1. If the returned object is null, Peek did not handle it correctly.
2. If the value was too big, TimeSeries chart did not handle it correctly. Now
it can handle up to 1.0E300.
3. Help message was difficult to access in installation program.
4. Source code panel now both highlights and marks the line in question (before
it was only highlight using JDK 1.2, not JDK 1.3).
5. Delete an item on PeekPoke and add a new one generated an error.
Version 1.50 August, 2001
Enhancement:
1. Source code level tracing supports EJB, JSP, java helper and other
programs which are written in native languages (as long as you
write correct log messages in your application).
2. Redress supports JSP now.
3. New installation with full help document: hope it will be easier.
4. Support WebSphere 4.0
Version 1.40 June, 2001
Enhancement:
1. Add SuperEnvironment which is a Kaleidoscope with TableView, TimeSeriesView
and PieView for GlobalProperties.
GlobalProperties is an open source program from Acelet.
2. SuperPeekPoke adds Kaleidoscope with TableView, TimeSeriesView and PieView.
Changes:
1. The structure of log database changed. You need delete old installation and
install everything new.
2. The format of time stamp of SuperLogging changed. It is not locale dependent:
better for report utilities.
3. Time stamp of SuperLogging added machine name: better for clustering environment.
Bug fix:
1. Under JDK 1.3, when you close Trace Panel, the timer may not be stopped and
Style Panel may not show up.
Version 1.30 May, 2001
Enhancement:
1. Add ConnectionPlugin support.
2. Add support for Borland AppServer.
Version 1.20 April, 2001
Enhancement:
1. Redress with option to save a backup file
2. More data validation on Dump Panel.
3. Add uninstall for Super itself.
4. Add Log Database Panel for changing the log database parameters.
5. Register Class: you can type in name or browse on file system.
6. New tour with new examples.
Bug fix:
1. Redress: save file may fail.
2. Install Bean: some may fail due to missing manifest file. Now, it is treated
as foreign beans.
3. Installation: Both installServerSideLibrary and installLogDatabase can be worked
on the original file, do not need copy to a temporary directory anymore.
4. PeekPoke: if there is no stub available, JNDI list would be empty for Weblogic5-6.
Now it pick up all availble ones and give warning messages.
5. Stress: Launch>Save>Cancel generated a null pointer exception.
Changes:
1. installLogDatabase has been changed from .zip file to .jar file.
2. SuperLogging: If the log database is broken, the log methods will not try to
access the log database. It is consistent with the document now.
3. SuperLogging will not read system properties now. You can put log database
parameters in SuperLoggingEJB's deployment descriptor.
Version 1.10 Feb., 2001
Enhancement:
1. Re-written PeekPoke with Save/Restore functions.
2. New SuperComponent: SuperStress for stress test.
3. Set a mark at the highlighted line on<font size=+0> the Source Code
Panel (as a work-a-round for JDK 1.3).</font>
4. Add support for WebLogic 6.0
Bug fix:
1. Uninstall bean does physically delete the jar file now.
2. WebLogic51 Envoy may not always list all JNDI names. This is fixed.
Version 1.00 Oct., 2000
Enhancement:
1. Support Universal server (virtual all EJB servers).
2. Add Lost and Found for JNDI names, in case you need it.
3. JNDI ComboBox is editable now, so you can PeekPoke not listed JNDI name (mainly
for Envoys which do not support JNDI list).
Version 0.90: Sept, 2000
Enhancement:
1. PeekPoke supports arbitrary objects (except for Vector, Hashtable
and alike) as input values.
2. Reworked help documents.
Bug fix:
1. Clicking Cancel button on Pace Panel set 0 to pace. It causes
further time-out.
2. MDI related bugs under JDK 1.3.
Version 0.80: Aug, 2000
Enhancement:
1. With full-featured SuperLogging.
Version 0.72: July, 2000
Bug fix:
1. Ignore unknown objects, so Weblogic5.1 can show JNDI list.
Version 0.71: July, 2000
Enhancement:
1. Re-worked peek algorithm, doing better for concurent use.
2. Add cacellable Wait dialog, showing Super is busy.
3. Add Stop button on Peek Panel.
4. Add undeploy example button.
Bug fix:
1. Deletion on Peek Panel may cause error under JDK 1.3. Now it works for both
1.2 and 1.3
Version 0.70: July, 2000
Enhancement:
1. PeekPoke EJBs without programming.
Bug fix:
1. Did not show many windows under JDK 1.3. Now it works for both 1.2 and 1.3
Changes:
1. All changes are backward compatible, but you may need to recompile monitor
windows defined by you.
Version 0.61: June, 2000
Bug fix:
1. First time if you choose BUFFER as logging device, message will not show.
2. Fixed LoggingPanel related bugs.
Version 0.60: May, 2000
Enhancement:
1. Add DATABASE as a logging device for persistent logging message.
2. Made alertInterval configurable.
3. Made pace for tracing configurable.
Bug fix:
1. Fixed many bugs.
Version 0.51, 0.52 and 0.53: April, 2000
Enhancement:
1. Add support to Weblogic 5.1 (support for Logging/Tracing and
user defined GUI window, not support for regular monitoring).
Bug fix:
1. Context sensitive help is available for most of windows: press F1.
2. Fix installation related problems.
Version 0.50: April, 2000
Enhancement:
1. Use JavaHelp for help system.
2. Add shutdown functionality for J2EE.
3. Add support to Weblogic 4.5 (support for Logging/Tracing and
user defined GUI window, not support for regular monitoring).
Bug fix:
1. Better exception handling for null Application.
Version 0.40: March, 2000
Enhancement:
1.New installation program, solves installation related problems.
2. Installation deploys AceletSuperApp application.
3. Add deploy/undeploy facilities.
4. Add EJB and application lists.
Change:
1.SimpleMonitorInterface: now more simple.
Version 0.30: January, 2000
Enhancement:
1. Add realm support to J2EE
2. Come with installation program: you just install what you want
the first time you run Super.
Version 0.20: January, 2000
Enhancement:
Add support to J2EE Sun-RI.
Change:
1. Replace logging device "file" with "buffer" to be
compliant to EJB 1.1. Your code do not need to change.
Version 0.10: December, 1999
Enhancement:
1. provide SimpleMonitorInterface, so GUI experience is
not necessary for developing most monitoring applications.
2. Sortable table for table based windows by mouse
click (left or right).
Version 0.01 November., 1999:
1. Bug fix: An exception thrown when log file is large.
2. Enhancement: Add tour section in Help information.
Version 0.00: October, 1999
Thanks.

I have set up my new iPad 2 on my windowsn 7 computer, but experienced syncing problems from the start. It seems that it doesn't recognize the iPad, although it appears in iTunes.It only gives set up as new or restore options.

I have set up my new iPad 2 on my computer (Windows 7), but experienced syncing problems from the start. It seems that although my iPad is regognized in iTunes as it appears there, it only gives met the options to set up as a new iPad or restore from the backup, no synching options. What do I do?

File>Devices>Transfer Purchases will transfer the itunes purchases to your ocmputer.
You should sync your ipod to your computer regularly.

Upload new member in the dimension not from BPC Admin

Hi Experts,
                 If we want to upload a new account not from of BPC admin, how we can do it?
    I tried to do it in MS version and was able to do it, as we have a dimension files in excel format (other than the temporary excel file ), we can add member in that excel file and run the Dimension process without selecting the "from member sheet". And it includes the new member.
              But in Netweaver version if we do same thing in the xml file of that dimension and try to process, it doesn't take the new member which was added in the xml file.. Any idea ..
Thanks
IshitaD

Hi Ishita,
Can you try using Data Manager to load master data? I know that is too much trouble if you want to load say just 1 record but it is a clean option that does not require BPC Admin.
Regards
Pravin

Guys i have a problem, I used to download apps from one of my friends apple id, now i created my new account, but when i was about to update my apps its asks for my friends id and password. now how could i update my old apps from my new apple id?

Guys i have a problem, I used to download apps from one of my friends apple id, now i created my new account, but when i was about to update my apps its asks for my friends id and password. now how could i update my old apps from my new apple id?

The_Tonmoy wrote:
I have no communication with my that friend :/ So it means i need to delete those apps? There's no other solution to update those apps?
No. purchases are forever tied to the apple ID used to buy them. Delete them and buy your own copies.

I replaced my hard drive and used time machine to boot from but it installedthe unrepaired disk permissions of the faulty previous drive would this cause problems on my new drive?

I replaced my hard drive on macbook pro and used time machine to boot from but it also installed the unrepaired disk permmissions of the other drive, would this cause problems to my new drive?

Can you remember what the permissions problem was that you had before? You may need to reinstall OS X from scratch and not reinstall anything from your Time Machine backups. To be on the safe side you should reinstall all third-party applications from scratch, as well. Then only restore from your backup your document/data files.

I am having trouble with my bluetooth skipping while its playing music from my Itunes music...I thought that this was an antiquated problem with the new technology?

I am having trouble with the music from my bluetooth "skipping" on my IPhone 5. I thought that this was an antiquated problem with the new technology. It's very frustrating to purchase all of this music and expect great sound and playability and get "skipping". Any ideas on how to resolve this issue?

Does the issue occur when listening to the media using the speaker or wired headphones? If it does, the issue is with the media itself.
If it does not, it's likely a bad connection or interference.

I getting no sound out of the USB connection in my car from my new iPod Classic. Has anyone encountered this problem?

I getting no sound out of the USB connection in my cars from my new iPod classic. The song name artist display on the console in the car but no audio. This is happening on 2 cars - Nissan Rogue and Acura TL. My older iPod classic played fine in these cars. Has anyone encountered this issue?

I have a similar problem with a 160 gb Classic, about 5 years old - if I move the plug one channel may be heard and tehn the other. The interface works but not the sound. Different ipods eg nano work perfectly.
The two cars I have are an Audi and a BMW and both have manufacturer connectors

I am upgrading from a 2nd gen ipod touch to a 4th gen ipod touch. Will I have problems syncing my new ipod to my existing itunes library/account?

I am upgrading from a 2nd gen ipod touch to a 4th gen ipod touch. Will I have problems syncing my new ipod to my existing itunes library/account?

Don't know why you would.
You can sync as many ipods/iphones/ipads as you like.

I am on OS X and i am having problems sending pictures from the new pictures app via email. when i hit the sharing button i have the option to send via iMessage or Facebook but the email option is ghosted and can't be checked off. any suggestions?

I am on OS X and i am having problems sending pictures from the new pictures app via email. when i hit the sharing button i have the option to send via iMessage or Facebook but the email option is ghosted and can't be checked off. any suggestions?

I've resolved my problem now. It wasn't iphoto: preferences:@ that I needed but iphoto:preferences:general where there is the option to choose email for sending photos. Can't believe I missed that before.

Quicktime problems from a new member

Similar Messages

Maybe you are looking for