QuickVPN timeout to WRVS4400N issue
I am using QuickVPN (1.4.1.2) on Win7 Pro, connecting to a WRVS4400Nv2 running the latest firmware (2.0.1.3). After an extended time of usage (approx 45-60min - per the log below), the tunnel drops (The remote gateway is not responding. Do you want to wait?).
I can immediately remote into my router for configuration. I can use RDP over a port forwarded rule. But I cannot re-establish the tunnel under the same ID, or even a different ID. The router is unresponsive to QuickVPN for approximately 5-10 minutes - even though it accepts the other processes fine, and routes to the internet fine for office users, and protects against external attacks.
The QuickVPN LOG looks like this:
2011/06/07 10:44:14 [STATUS]OS Version: Windows 7
2011/06/07 10:44:14 [STATUS]Windows Firewall Domain Profile Settings: ON
2011/06/07 10:44:14 [STATUS]Windows Firewall Private Profile Settings: ON
2011/06/07 10:44:14 [STATUS]Windows Firewall Private Profile Settings: ON
2011/06/07 10:44:16 [STATUS]One network interface detected with IP address 192.168.2.46
2011/06/07 10:44:16 [STATUS]Connecting...
2011/06/07 10:44:16 [DEBUG]Input VPN Server Address = xxx.xxx.xxx <---- address purposefully removed
2011/06/07 10:44:17 [STATUS]Connecting to remote gateway with IP address: xxx.xxx.xxx.xxx <---- address purposefully removed
2011/06/07 10:44:20 [STATUS]Remote gateway was reached by https ...
2011/06/07 10:44:20 [STATUS]Provisioning...
2011/06/07 10:44:32 [STATUS]Success to connect.
2011/06/07 10:44:32 [STATUS]Tunnel is configured. Ping test is about to start.
2011/06/07 10:44:32 [STATUS]Verifying Network...
2011/06/07 10:44:38 [WARNING]Failed to ping remote VPN Router!
2011/06/07 11:43:24 [WARNING]Failed to ping remote VPN Router! <---- Here is where you can see the drop 1 hr later
2011/06/07 11:43:27 [WARNING]Failed to ping remote VPN Router!
2011/06/07 11:43:30 [WARNING]Failed to ping remote VPN Router!
2011/06/07 11:43:33 [WARNING]Failed to ping remote VPN Router!
2011/06/07 11:43:36 [WARNING]Failed to ping remote VPN Router!
2011/06/07 11:43:39 [WARNING]Ping was blocked, which can be caused by an unexpected disconnect.
After 5-10 minutes, I can reconnect to the router, for another 45-60 minutes, before I get booted again. I thought is was firmware, since this latest firmware addresses some specific QuickVPN issues, but it has not been resolved. Does anyone have a suggested solution for the issue?
I have very similar situation with ckunkel.
I set up WRVS4400n router and VPN settings, I can connect my outside PC to router with QuickVPN client, but after serveral times of connection or some duration of connection, router stops accepting any more VPN connection.
Only different point, I can't resolve this situation except rebooting router. Once I get router's VPN hung-up, I can't connect VPN any more without rebooting.
Router's firmware is V2.0.2.1, and QuickVPN is Ver 1.4.2.1.
This situation is veri inconvenient for our office, because once somebody outside of office starts faied VPN connection, all other staffs in office have to stop using internet, and have to wait rebooting router.
Does anyone in Cisco recognize this problem and know how to resolve this?
Yukari Mihashi
A Solutions Seattle, Inc.
Similar Messages
-
Ok I've been stupid :/ I bought this Wireless Router because of its VPN capability and N connectivity. When I installed this router everything seems fine until the day after. after some hours my machines are unable to get an IP adres from this router, only my wired machines get a IP adres. VPN access doesn't work, I always get "Verifying Network" and it stucks there. So I started reading on the I'net,.......... o my god then I came to the conclusion that almost everybody has troubles with this expensive router that doesn't seem to work and Linksys failed to give his users an answer! So my question is there somebody who got this router working and stable? Are there any tips or tricks I missed to get this machine working?
I found some kind of Silver bullet :/
First of all the different language/country websites have different downloads on there site. For example on the Belgium website of linksys there is no firmware download possible. Only the Quickvpn client can you download there.
The American Website is the most updated one I found.
I got my router now working for 2 weeks without any reset . What I did:
1ste I've downgraded the firmware to 1.0.16 with the wrvs4400n recovery tool.
2th I have set my Wireless to B/G only (N disabled)
this setup seems stable, my router is now working for about 2 weeks without any problem.
Maybe this B/G setup also works on the newer firmware, but I'm glad the thing is up and running and I don't want to mess it up again
So if anybody with the newer firmware could test the B/G only stability -
Server0 is not getting started some timeout out services: issue with thread
in SAP MMC server0 is in yellow colour!!!!!!!!
and dev_server0.out file is below explaing the exect error in log file......................
stdout/stderr redirect
node name : server0
pid : 7832
system name : E12
system nr. : 03
started at : Thu May 29 09:46:48 2008
Reserved 1610612736 (0x60000000) bytes before loading DLLs.
[Thr 7432] MtxInit: -2 0 0
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
SAP J2EE Engine Version 7.00 PatchLevel is starting...
Error occurred while preloading classes of security providers from jre/lib/ext folder: java.util.zip.ZipException: The filename, directory name, or volume label syntax is incorrect
Loading: LogManager ... 1297 ms.
Loading: PoolManager ... 16 ms.
Loading: ApplicationThreadManager ... 47 ms.
Loading: ThreadManager ... 16 ms.
Loading: IpVerificationManager ... 31 ms.
Loading: ClassLoaderManager ... 15 ms.
Loading: ClusterManager ... 235 ms.
Loading: LockingManager ... 78 ms.
Loading: ConfigurationManager ... 2187 ms.
Loading: LicensingManager ... 32 ms.
Loading: CacheManager ... 140 ms.
Loading: ServiceManager ...
Loading services.:
Service DQE started. (0 ms).
Service runtimeinfo started. (16 ms).
Service cross started. (94 ms).
Service memory started. (16 ms).
Service timeout started. (47 ms).
Service file started. (187 ms).
Service p4 started. (1078 ms).
Service classpath_resolver started. (31 ms).
Service log_configurator started. (3360 ms).
Service locking started. (0 ms).
Service naming started. (266 ms).
Service ts started. (62 ms).
Service javamail started. (62 ms).
Service licensing started. (15 ms).
Service iiop started. (250 ms).
================================================================================
getThreadDump : Thu May 29 10:06:59 2008
Timed out services:
Service MigrationService > hard reference to interface container.
Service shell > hard reference to interface security.
Service bimmrdeployer > hard reference to interface container.
================================================================================
Timed out services:
Full thread dump Java HotSpot(TM) Server VM (1.4.2_12-b03 mixed mode):
"SAPJarResourceCloseTimeoutThread" daemon prio=5 tid=0x051789f0 nid=0x2770 in Object.wait() [0x07e7f000..0x07e7fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15590060> (a com.sap.engine.frame.core.load.res.JarThread)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.frame.core.load.res.JarThread.run(JarThread.java:32)
- locked <0x15590060> (a com.sap.engine.frame.core.load.res.JarThread)
"Thread-14" daemon prio=5 tid=0x053dbdf8 nid=0x2f4 in Object.wait() [0x07e3f000..0x07e3fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x155900f8> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:111)
- locked <0x155900f8> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:127)
at com.sap.engine.cache.util.ReferenceQueueRunnable.run(ReferenceQueueRunnable.java:43)
at java.lang.Thread.run(Thread.java:534)
"Background Jobs Internal Thread" daemon prio=5 tid=0x04dafc38 nid=0x102c in Object.wait() [0x07dff000..0x07dffd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15590168> (a java.lang.Object)
at com.sap.engine.cache.job.impl.BackgroundExactImpl.run(BackgroundExactImpl.java:134)
- locked <0x15590168> (a java.lang.Object)
at java.lang.Thread.run(Thread.java:534)
"Timeout Service Integrity Watcher Thread" daemon prio=10 tid=0x0556e008 nid=0x165c in Object.wait() [0x07dbf000..0x07dbfd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15590218> (a com.sap.engine.cache.job.impl.IntegrityWatcher)
at com.sap.engine.cache.job.impl.IntegrityWatcher.run(IntegrityWatcher.java:54)
- locked <0x15590218> (a com.sap.engine.cache.job.impl.IntegrityWatcher)
at java.lang.Thread.run(Thread.java:534)
"Background Jobs Internal Thread" daemon prio=5 tid=0x055a6008 nid=0x27f0 in Object.wait() [0x07d7f000..0x07d7fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x155902a0> (a java.lang.Object)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.cache.job.impl.BackgroundExactImpl.run(BackgroundExactImpl.java:115)
- locked <0x155902a0> (a java.lang.Object)
at java.lang.Thread.run(Thread.java:534)
"Timeout Service Integrity Watcher Thread" daemon prio=10 tid=0x04dea760 nid=0x26bc in Object.wait() [0x07d3f000..0x07d3fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15590330> (a com.sap.engine.cache.job.impl.IntegrityWatcher)
at com.sap.engine.cache.job.impl.IntegrityWatcher.run(IntegrityWatcher.java:54)
- locked <0x15590330> (a com.sap.engine.cache.job.impl.IntegrityWatcher)
at java.lang.Thread.run(Thread.java:534)
"SAPEngine_EnquReader" prio=5 tid=0x04f8cb58 nid=0x25a0 runnable [0x06cff000..0x06cffd94]
at java.net.SocketInputStream.socketRead0(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:129)
at com.sap.bc.krn.enqu.EncomiHandle.ReceiveMessage(EncomiHandle.java:483)
- locked <0x155903f8> (a java.lang.Object)
at com.sap.bc.krn.enqu.EnccliMultiplexHandle.receive(EnccliMultiplexHandle.java:771)
at com.sap.bc.krn.enqu.ReadRunnable.run(EnccliMultiplexHandle.java:958)
at java.lang.Thread.run(Thread.java:534)
"SAP J2EE Engine|MS Ping Thread" prio=5 tid=0x0503c9d0 nid=0x189c waiting on condition [0x06cbf000..0x06cbfd94]
at java.lang.Thread.sleep(Native Method)
at com.sap.engine.core.cluster.impl6.ms.MSRawConnection$MSPingRunner.run(MSRawConnection.java:2383)
at java.lang.Thread.run(Thread.java:534)
"SAPEngine_System_Thread[impl:5]_39" prio=5 tid=0x04d96d28 nid=0x10ac in Object.wait() [0x06bdf000..0x06bdfd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15590528> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15590528> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
"SAPEngine_System_Thread[impl:5]_38" prio=5 tid=0x05003a38 nid=0x2630 in Object.wait() [0x06b9f000..0x06b9fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15590528> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15590528> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
"SAPEngine_System_Thread[impl:5]_37" prio=10 tid=0x04d96258 nid=0x259c in Object.wait() [0x06b5f000..0x06b5fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15590648> (a com.sap.engine.core.service630.container.InterfaceWrapper)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:119)
- locked <0x15590648> (a com.sap.engine.core.service630.container.InterfaceWrapper)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
"SAPEngine_System_Thread[impl:5]_36" prio=5 tid=0x04d95808 nid=0x2610 in Object.wait() [0x06b1f000..0x06b1fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15590528> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15590528> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
"SAPEngine_System_Thread[impl:5]_35" prio=5 tid=0x04faabd8 nid=0x17fc in Object.wait() [0x06adf000..0x06adfd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15590528> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15590528> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
"SAPEngine_System_Thread[impl:5]_34" prio=5 tid=0x04faa180 nid=0x213c in Object.wait() [0x06a9f000..0x06a9fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15590528> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15590528> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
"SAPEngine_System_Thread[impl:5]_33" prio=5 tid=0x04fa95f0 nid=0x2594 in Object.wait() [0x06a5f000..0x06a5fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15590528> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15590528> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
"SAPEngine_System_Thread[impl:5]_32" prio=5 tid=0x04c738e0 nid=0x2580 in Object.wait() [0x06a1f000..0x06a1fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15590528> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15590528> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
"SAPEngine_System_Thread[impl:5]_31" prio=5 tid=0x04c72cb8 nid=0x2558 in Object.wait() [0x069df000..0x069dfd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x155909d8> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:192)
- locked <0x155909d8> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.configuration.impl.event.QueuedEventProcessor.run(QueuedEventProcessor.java:44)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
"SAPEngine_System_Thread[impl:5]_30" prio=5 tid=0x04c721c8 nid=0x257c in Object.wait() [0x0699f000..0x0699fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15590528> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15590528> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
"SAPEngine_System_Thread[impl:5]_29" prio=5 tid=0x04c716d8 nid=0x2584 in Object.wait() [0x0695f000..0x0695fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15590528> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15590528> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
"SAPEngine_System_Thread[impl:5]_28" prio=5 tid=0x04c70be8 nid=0x2634 in Object.wait() [0x0691f000..0x0691fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15590528> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15590528> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
"SAPEngine_System_Thread[impl:5]_27" prio=5 tid=0x04f98e78 nid=0x2658 in Object.wait() [0x068df000..0x068dfd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15590528> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15590528> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
"SAPEngine_System_Thread[impl:5]_26" prio=5 tid=0x04f98b88 nid=0x2620 in Object.wait() [0x0689f000..0x0689fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15590528> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15590528> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
"SAPEngine_System_Thread[impl:5]_25" prio=10 tid=0x04f98098 nid=0x5b0 in Object.wait() [0x0685f000..0x0685fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15590d50> (a com.sap.engine.core.service630.container.InterfaceWrapper)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:119)
- locked <0x15590d50> (a com.sap.engine.core.service630.container.InterfaceWrapper)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
"SAPEngine_System_Thread[impl:5]_24" prio=5 tid=0x04f8d1e8 nid=0x1df4 waiting on condition [0x0681f000..0x0681fd94]
at java.lang.Thread.sleep(Native Method)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool$IdleConnectionsChecker.run(DBConnectionPool.java:427)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
"SAPEngine_System_Thread[impl:5]_23" prio=5 tid=0x04c6f008 nid=0x25c4 in Object.wait() [0x067df000..0x067dfd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15590528> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15590528> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
"SAPEngine_System_Thread[impl:5]_22" prio=10 tid=0x04e915d8 nid=0x25ec in Object.wait() [0x0679f000..0x0679fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15590648> (a com.sap.engine.core.service630.container.InterfaceWrapper)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:119)
- locked <0x15590648> (a com.sap.engine.core.service630.container.InterfaceWrapper)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
"Timeout Service Synchronous Internal Thread" prio=5 tid=0x04e909a0 nid=0x255c in Object.wait() [0x0675f000..0x0675fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x155910b0> (a java.lang.Object)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.services.timeout.TimeoutManagerImpl.singleThreadRun(TimeoutManagerImpl.java:589)
- locked <0x155910b0> (a java.lang.Object)
at com.sap.engine.services.timeout.TimeoutManagerRunner.run(TimeoutManagerRunner.java:18)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
"SAPEngine_System_Thread[impl:5]_20" prio=5 tid=0x04e8fc48 nid=0x238c in Object.wait() [0x0671f000..0x0671fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15590528> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15590528> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
"SAP J2EE Engine|MS Queue Listener" prio=5 tid=0x04e8f0c0 nid=0x25cc in Object.wait() [0x066df000..0x066dfd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15591260> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:192)
- locked <0x15591260> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.cluster.impl6.ms.MSListenerQueue.run(MSListenerQueue.java:67)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
"SAPEngine_System_Thread[impl:5]_18" prio=5 tid=0x04f82db0 nid=0x2578 in Object.wait() [0x0669f000..0x0669fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15590528> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15590528> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
"SAPEngine_System_Thread[impl:5]_17" prio=5 tid=0x04f826c0 nid=0x2574 in Object.wait() [0x0665f000..0x0665fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15590528> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15590528> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
"SAPEngine_System_Thread[impl:5]_16" prio=5 tid=0x04aa4178 nid=0x2600 in Object.wait() [0x0661f000..0x0661fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15591438> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:111)
- locked <0x15591438> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:127)
at com.sap.engine.lib.util.cache.CacheGroup.run(CacheGroup.java:76)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
"SAP J2EE Engine|MS Socket Listener" prio=5 tid=0x04aa3a88 nid=0x2530 runnable [0x065df000..0x065dfd94]
at java.net.SocketInputStream.socketRead0(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:129)
at java.io.BufferedInputStream.fill(BufferedInputStream.java:183)
at java.io.BufferedInputStream.read1(BufferedInputStream.java:222)
at java.io.BufferedInputStream.read(BufferedInputStream.java:277)
- locked <0x15591d60> (a java.io.BufferedInputStream)
at com.sap.engine.core.cluster.impl6.ms.MSMessageHeader.read(MSMessageHeader.java:440)
at com.sap.engine.core.cluster.impl6.ms.MSMessageObjectImpl.readHeader(MSMessageObjectImpl.java:142)
at com.sap.engine.core.cluster.impl6.ms.MSRawConnection.receiveRawMessage(MSRawConnection.java:1660)
at com.sap.engine.core.cluster.impl6.ms.MSListener.run(MSListener.java:86)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
"SAPEngine_System_Thread[impl:5]_14" prio=5 tid=0x04aa2f98 nid=0x25b0 in Object.wait() [0x0659f000..0x0659fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15590528> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15590528> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
"SAPEngine_System_Thread[impl:5]_13" prio=5 tid=0x04aa24a8 nid=0x5e4 in Object.wait() [0x0655f000..0x0655fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x155921d0> (a com.sap.engine.services.log_configurator.archive.Buffer)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.services.log_configurator.archive.Buffer.getTask(Buffer.java:38)
- locked <0x155921d0> (a com.sap.engine.services.log_configurator.archive.Buffer)
at com.sap.engine.services.log_configurator.archive.ArchivingThread.run(ArchivingThread.java:37)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
"SAPEngine_System_Thread[impl:5]_12" prio=5 tid=0x04aa19d0 nid=0x24a0 in Object.wait() [0x0651f000..0x0651fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15590528> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15590528> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
"SAPEngine_System_Thread[impl:5]_11" prio=5 tid=0x04b90190 nid=0xffc in Object.wait() [0x064df000..0x064dfd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15590528> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15590528> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
"SAPEngine_System_Thread[impl:5]_10" prio=5 tid=0x04b8faa0 nid=0x25ac in Object.wait() [0x0649f000..0x0649fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15590528> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15590528> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
"SAPEngine_System_Thread[impl:5]_9" prio=5 tid=0x04b8f008 nid=0x260c in Object.wait() [0x0645f000..0x0645fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15590528> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15590528> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
"Timeout Service Integrity Watcher Thread" prio=10 tid=0x04f4dc10 nid=0x2588 in Object.wait() [0x0641f000..0x0641fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15592478> (a com.sap.engine.services.timeout.TimeoutIntegrityWatcher)
at com.sap.engine.services.timeout.TimeoutIntegrityWatcher.run(TimeoutIntegrityWatcher.java:69)
- locked <0x15592478> (a com.sap.engine.services.timeout.TimeoutIntegrityWatcher)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
"SAPEngine_System_Thread[impl:5]_7" prio=5 tid=0x04ed5e18 nid=0x25c8 runnable [0x063df000..0x063dfd94]
at java.net.PlainSocketImpl.socketAccept(Native Method)
at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:353)
- locked <0x15592590> (a java.net.PlainSocketImpl)
at java.net.ServerSocket.implAccept(ServerSocket.java:448)
at com.sap.engine.core.cluster.impl6.net.ClusterServerSocket.accept(ClusterServerSocket.java:51)
at com.sap.engine.core.cluster.impl6.JoinPortListener.run(JoinPortListener.java:72)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
"SAPEngine_System_Thread[impl:5]_6" prio=5 tid=0x04ed5c18 nid=0x2568 in Object.wait() [0x0639f000..0x0639fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15590528> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15590528> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
"Timeout Service Internal Thread" prio=5 tid=0x04eb6ce0 nid=0x100c in Object.wait() [0x0635f000..0x0635fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x155927c0> (a java.lang.Object)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.services.timeout.TimeoutManagerImpl.multiThreadRun(TimeoutManagerImpl.java:476)
- locked <0x155927c0> (a java.lang.Object)
at com.sap.engine.services.timeout.TimeoutManagerRunner.run(TimeoutManagerRunner.java:20)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
"Timeout Service Integrity Watcher Thread" prio=10 tid=0x04ecce28 nid=0x25f4 in Object.wait() [0x0631f000..0x0631fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x155928a8> (a com.sap.engine.services.timeout.TimeoutIntegrityWatcher)
at com.sap.engine.services.timeout.TimeoutIntegrityWatcher.run(TimeoutIntegrityWatcher.java:69)
- locked <0x155928a8> (a com.sap.engine.services.timeout.TimeoutIntegrityWatcher)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
"Session Reader for cluster node 34388700" prio=5 tid=0x04eccc28 nid=0x25f0 runnable [0x062df000..0x062dfd94]
at java.net.SocketInputStream.socketRead0(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:129)
at java.io.BufferedInputStream.fill(BufferedInputStream.java:183)
at java.io.BufferedInputStream.read1(BufferedInputStream.java:222)
at java.io.BufferedInputStream.read(BufferedInputStream.java:277)
- locked <0x155931c8> (a java.io.BufferedInputStream)
at com.sap.engine.core.cluster.impl6.session.Reader.run(Reader.java:83)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
"SAPEngine_System_Thread[impl:5]_2" prio=5 tid=0x04aa4d38 nid=0x25c0 in Object.wait() [0x0629f000..0x0629fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15590528> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15590528> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
"SAPEngine_System_Thread[impl:5]_1" prio=5 tid=0x04aa4708 nid=0x2604 in Object.wait() [0x0625f000..0x0625fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15590528> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15590528> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
"OrderedChannel for service" prio=5 tid=0x04b722a8 nid=0x23e4 in Object.wait() [0x0621f000..0x0621fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15590528> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15590528> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
"SAPEngine_System_Thread[impl:5]_ThreadManager Maintaining thread." prio=10 tid=0x04b720a8 nid=0x308 in Object.wait() [0x061df000..0x061dfd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15593ac8> (a com.sap.engine.core.thread.impl5.ExecutorThread)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.core.thread.impl5.ExecutorThread.run(ExecutorThread.java:70)
- locked <0x15593ac8> (a com.sap.engine.core.thread.impl5.ExecutorThread)
"SAPEngine_Application_Thread[impl:3]_ThreadManager Maintaining thread." prio=10 tid=0x04daf810 nid=0x252c in Object.wait() [0x0619f000..0x0619fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15593b20> (a com.sap.engine.core.thread.impl3.RuntimeMaintainingThread)
at com.sap.engine.core.thread.impl3.RuntimeMaintainingThread.run(RuntimeMaintainingThread.java:65)
- locked <0x15593b20> (a com.sap.engine.core.thread.impl3.RuntimeMaintainingThread)
"SAPEngine_Application_Thread[impl:3]_39" prio=5 tid=0x04daed20 nid=0xc40 in Object.wait() [0x0615f000..0x0615fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:147)
"SAPEngine_Application_Thread[impl:3]_38" prio=5 tid=0x04e94e30 nid=0x12c0 in Object.wait() [0x0611f000..0x0611fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:147)
"SAPEngine_Application_Thread[impl:3]_37" prio=5 tid=0x04e94740 nid=0x2554 in Object.wait() [0x060df000..0x060dfd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:147)
"SAPEngine_Application_Thread[impl:3]_36" prio=5 tid=0x04e93c50 nid=0x145c in Object.wait() [0x0609f000..0x0609fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:147)
"SAPEngine_Application_Thread[impl:3]_35" prio=5 tid=0x04e93160 nid=0x2440 in Object.wait() [0x0605f000..0x0605fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:147)
"SAPEngine_Application_Thread[impl:3]_34" prio=5 tid=0x04e926f8 nid=0x2534 in Object.wait() [0x0601f000..0x0601fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:147)
"SAPEngine_Application_Thread[impl:3]_33" prio=5 tid=0x0117eed0 nid=0x27a8 in Object.wait() [0x05fdf000..0x05fdfd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:147)
"SAPEngine_Application_Thread[impl:3]_32" prio=5 tid=0x0117e3e0 nid=0x2220 in Object.wait() [0x05f9f000..0x05f9fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:147)
"SAPEngine_Application_Thread[impl:3]_31" prio=5 tid=0x0117d8f0 nid=0x1dac in Object.wait() [0x05f5f000..0x05f5fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:147)
"SAPEngine_Application_Thread[impl:3]_30" prio=5 tid=0x01188450 nid=0x1fbc in Object.wait() [0x05f1f000..0x05f1fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:147)
"SAPEngine_Application_Thread[impl:3]_29" prio=5 tid=0x01187960 nid=0x1420 in Object.wait() [0x05edf000..0x05edfd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:147)
"SAPEngine_Application_Thread[impl:3]_28" prio=5 tid=0x01186e70 nid=0x2560 in Object.wait() [0x05e9f000..0x05e9fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:147)
"SAPEngine_Application_Thread[impl:3]_27" prio=5 tid=0x01186408 nid=0x22d8 in Object.wait() [0x05e5f000..0x05e5fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:147)
"SAPEngine_Application_Thread[impl:3]_26" prio=5 tid=0x04c65760 nid=0x7f4 in Object.wait() [0x05e1f000..0x05e1fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:147)
"SAPEngine_Application_Thread[impl:3]_25" prio=5 tid=0x04c64c70 nid=0x179c in Object.wait() [0x05ddf000..0x05ddfd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:147)
"SAPEngine_Application_Thread[impl:3]_24" prio=5 tid=0x04c64180 nid=0x256c in Object.wait() [0x05d9f000..0x05d9fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:147)
"SAPEngine_Application_Thread[impl:3]_23" prio=5 tid=0x04fca4a0 nid=0xa28 in Object.wait() [0x05d5f000..0x05d5fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:147)
"SAPEngine_Application_Thread[impl:3]_22" prio=5 tid=0x04fc9a08 nid=0x1974 in Object.wait() [0x05d1f000..0x05d1fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:147)
"SAPEngine_Application_Thread[impl:3]_21" prio=5 tid=0x04fc9008 nid=0x24a4 in Object.wait() [0x05cdf000..0x05cdfd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:147)
"SAPEngine_Application_Thread[impl:3]_20" prio=5 tid=0x04ad4ba0 nid=0x1c6c in Object.wait() [0x05c9f000..0x05c9fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:147)
"SAPEngine_Application_Thread[impl:3]_19" prio=5 tid=0x04ad40b0 nid=0xd7c in Object.wait() [0x05c5f000..0x05c5fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:147)
"SAPEngine_Application_Thread[impl:3]_18" prio=5 tid=0x049a3d68 nid=0x2550 in Object.wait() [0x05c1f000..0x05c1fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:147)
"SAPEngine_Application_Thread[impl:3]_17" prio=5 tid=0x049a3a78 nid=0x2408 in Object.wait() [0x05bdf000..0x05bdfd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:147)
"SAPEngine_Application_Thread[impl:3]_16" prio=5 tid=0x049a2f88 nid=0x1684 in Object.wait() [0x05b9f000..0x05b9fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:147)
"SAPEngine_Application_Thread[impl:3]_15" prio=5 tid=0x049a2530 nid=0x2230 in Object.wait() [0x05b5f000..0x05b5fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:147)
"SAPEngine_Application_Thread[impl:3]_14" prio=5 tid=0x04d09830 nid=0x2540 in Object.wait() [0x05b1f000..0x05b1fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:147)
"SAPEngine_Application_Thread[impl:3]_13" prio=5 tid=0x04d08d70 nid=0x2454 in Object.wait() [0x05adf000..0x05adfd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:147)
"SAPEngine_Application_Thread[impl:3]_12" prio=5 tid=0x04d08408 nid=0x24c4 in Object.wait() [0x05a9f000..0x05a9fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:147)
"SAPEngine_Application_Thread[impl:3]_11" prio=5 tid=0x04b2f0c8 nid=0x2210 in Object.wait() [0x05a5f000..0x05a5fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:147)
"SAPEngine_Application_Thread[impl:3]_10" prio=5 tid=0x04cbe670 nid=0x2330 in Object.wait() [0x05a1f000..0x05a1fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:147)
"SAPEngine_Application_Thread[impl:3]_9" prio=5 tid=0x04cbe3e8 nid=0xf28 in Object.wait() [0x059df000..0x059dfd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:147)
"SAPEngine_Application_Thread[impl:3]_8" prio=5 tid=0x0119f170 nid=0x1978 in Object.wait() [0x0599f000..0x0599fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:147)
"SAPEngine_Application_Thread[impl:3]_7" prio=5 tid=0x0119f008 nid=0x2284 in Object.wait() [0x0595f000..0x0595fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:147)
"SAPEngine_Application_Thread[impl:3]_6" prio=5 tid=0x04ebb408 nid=0x24ec in Object.wait() [0x0591f000..0x0591fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:147)
"SAPEngine_Application_Thread[impl:3]_5" prio=5 tid=0x0119c720 nid=0x2448 in Object.wait() [0x058df000..0x058dfd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:147)
"SAPEngine_Application_Thread[impl:3]_4" prio=5 tid=0x0119c520 nid=0x1e68 in Object.wait() [0x0589f000..0x0589fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:147)
"SAPEngine_Application_Thread[impl:3]_3" prio=5 tid=0x0119c3b8 nid=0x2148 in Object.wait() [0x0585f000..0x0585fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:147)
"SAPEngine_Application_Thread[impl:3]_2" prio=5 tid=0x0119be78 nid=0x1e28 in Object.wait() [0x0581f000..0x0581fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:147)
"SAPEngine_Application_Thread[impl:3]_1" prio=5 tid=0x0119bd10 nid=0x1ef8 in Object.wait() [0x057df000..0x057dfd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:147)
"SAPEngine_Application_Thread[impl:3]_0" prio=5 tid=0x04b92008 nid=0x2504 in Object.wait() [0x0579f000..0x0579fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x15593bd8> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:147)
"Thread-1" prio=5 tid=0x01189310 nid=0x1e3c runnable [0x0492f000..0x0492fd94]
at java.util.Calendar.<init>(Calendar.java:786)
at java.util.GregorianCalendar.<init>(GregorianCalendar.java:364)
at java.util.GregorianCalendar.<init>(GregorianCalendar.java:336)
at com.sap.localization.LocalizableTextFormatter.<init>(LocalizableTextFormatter.java:71)
at com.sap.localization.LocalizableTextFormatter.<init>(LocalizableTextFormatter.java:126)
at com.sap.localization.LocalizableTextFormatter.formatString(LocalizableTextFormatter.java:199)
at com.sap.engine.core.service630.ResourceUtils.formatString(ResourceUtils.java:244)
- locked <0x50bd4e58> (a java.lang.Class)
at com.sap.engine.core.service630.container.MemoryContainer.startServices(MemoryContainer.java:230)
- locked <0x15594ef0> (a com.sap.engine.core.service630.container.MemoryContainer)
at com.sap.engine.core.service630.container.MemoryContainer.start(MemoryContainer.java:158)
- locked <0x15594f78> (a java.lang.Object)
at com.sap.engine.core.service630.container.AbstractServiceContainer.init(AbstractServiceContainer.java:109)
at com.sap.engine.core.Framework.loadSingleManager(Framework.java:560)
at com.sap.engine.core.Framework.loadManagers(Framework.java:254)
at com.sap.engine.core.Framework.start(Framework.java:188)
- locked <0x15594eb0> (a com.sap.engine.core.Framework)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.boot.FrameThread.run(FrameThread.java:61)
at java.lang.Thread.run(Thread.java:534)
"Signal Dispatcher" daemon prio=10 tid=0x01159408 nid=0x24e4 waiting on condition [0x00000000..0x00000000]
"Finalizer" daemon prio=9 tid=0x010f0e50 nid=0x24bc in Object.wait() [0x0472f000..0x0472fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x155955f8> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:111)
- locked <0x155955f8> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:127)
at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:159)
"Reference Handler" daemon prio=10 tid=0x010f02c0 nid=0x233c in Object.wait() [0x046ef000..0x046efd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x15593748> (a java.lang.ref.Reference$Lock)
at java.lang.Object.wait(Object.java:429)
at java.lang.ref.Reference$ReferenceHandler.run(Reference.java:115)
- locked <0x15593748> (a java.lang.ref.Reference$Lock)
"main"Hi Naveen,
What you are doing is not supported by Oracle. From EM Database Console FAQ (863631.1):
What action needs to be taken if the hostname or SID of the database server is changed?
If there is a hostname or SID change for the database server then the database console needs to be recreated. There is no other solution if the hostname or SID is changed other that recreating the database console. All database console configuration files are created under the hostname_sid directory and the configuration files along with the repository keeps reference of the hostname, which is why dbconsole needs to be reconfigured if there is change in hostname/sid.
Refer : Note.293678.1 How To Reconfigure DB Control After a Hostname, Domain name or Listener Change Has Occurred On The Server
And take a look at note 278100.1: How To Drop, Create And Recreate DB Control In A 10g Database
Eric -
I honestly don't understand how cisco can release a product like this. It's soo flakey and unrealiable. So far in order to get my 4400nv1 running I've had to use the recovery utility just to load firmware onto it (that was a 16hour ordeal!!) then it takes 2 tries (with regularity) to upgrade to the next level of firmware. All this just to get the device stable enough to support a wireless connection. I still have not been able to get it on the internet with any acceptable level of performance.
So far the best I can get this router to do is have 50% packet loss on the the WAN interface. I've tried disabling the DMZ, IPS, WAN access but alwaly I have 50% packet loss. These devices should be recalled.!!! my 5 year old Netgeat MR814 works better than this. this devices just has me frustrated. I work regularely with Fortinet products and they are much better and more reliable. the only reason I'm trying this out is It was given to me.
does anyone have a fix for 50% packet loss on these things! This is just stupid!Same feelings
Great User Interface indeed-horrible with reliability. Conigured with same sattings as replaced v.1 and can't stay connected for more than an Hour. Not a defective unit though-programmed 2 others same way and very same results-wireless drops almost immidiately, then can't access Router config and after few hours complete restart-nothing works.
Using wireless on Channel free of interference, besides that 4 IPSec tunnels-those stay alive until the end.
Regards
Voytek -
WRVS4400N issue out of the box. Can't connect to the unit for setup.
As mentioned, I cannot get a dhcp address from this unit to my notebook for configuration. I have tried manually assigning an ip address in the 192.168.1.1 network and it doesn't work wither. I tried another machine and still the same problem. I also reset the unit twice.
So far I can't do anything with this unit right out of the box.
Anyone have a fix?
Thanks
-MikeYour computer is called an iMac.
Did you turn proxies on? If so, you should turn them off. -
Hello Friends,
we have been using IXOS as document storage and encoutered a strange timeout /ABAP DUMP issue as below .
The termination occurred in the ABAP program "/IXOS/DRPO_CL_MAIN============CP"
in "WAIT_UNTIL_DATA_IN_DB".
The main program was "ZTEST_DRPO_TEST_POST_FI_BKGR ".
The termination occurred in line 68 of the source code of the (Include)
program "/IXOS/DRPO_CL_MAIN============CM00A"
of the source code of program "/IXOS/DRPO_CL_MAIN============CM00A" (when
calling the editor 680).
Error Message : Exception condition "TIMEOUT" raised.
The method is basically making sure the FI document is created or not upto 1000 seconds as wait time.
Please let me know the cause and rectification if you have encountered the same.
thanks.
Raghu VHello,
I would guess that the 1000 seconds is too long. Try less.
By the way, this is the workflow forum!
regards
Rick Bakker
Hanabi Technology -
Frequent timeouts and poor performance
Hello,
Starting this morning I'm experiencing a lot of timeouts and performance issues with my SQL Azure DB (located in West US), causing several Azure hosted services to fail. I've checked everything I can think of and it nothing shows a clear problem with our
databases. I'm not seeing anything on the dashboard, but can't help but wonder if there is an issue going on that hasn't been detected.
Any suggestions on how to troubleshoot this issue?
Thanks,
-FabioHi Fabio,
I work on the Cotega monitoring service for SQL Azure and I can also confirm that we saw a few customer who we notified of performance issues with SQL Azure as well.
Now that I write this, I am wondering if it might be worth adding to the service a page that lets anyone see the historical performance of SQL Azure based on aggregated data from all of the customers databases that we currently monitor. I wonder if
that would be useful for situations like this? -
Configuring WRVS4400N with UC320W
Hello,
I'm new to VLANs and PBX systems so I was hoping I could get some help in setting up a Cisco UC320W with my WRVS4400N v2 router, specifically connecting to a SIP trunk and with IP phones. I am able to get the UC320W to work if I bypass the router but I would rather not do that for security reasons. I suspect I need to configure a VLAN for the UC320 but am not sure how to do this. I would appreciate if anyone can provide some help and/or guidance. Thanks.Hi,
Thank you for posting. In the AG300, forward the following ports to the WRVS4400N WAN port IP address: 443, 500, 4500, 60443. This may allow you to establish a QuickVPN to the WRVS4400N using the WAN IP of the AG300. -
We are currently running P6 (Release 8.1.2.6). It runs in a LINUX environment using IE8 with JRE 24. Ever since our deployment, we have continued to experience user timeouts. The issue has finally reached critical mass with our user base and management. We have had an open SR with Oracle for months but seem to be getting no solutions or suggestions that remedy the issue.
Has anyone else experienced this issue? What areas of the installation were potential suspects?
We have been trying everything imaginable and our management is to the point where they are close to pulling the trigger to look at replacing the product with something similar to MS Project.
Suggestions?I was wondering if there was any resolution to this issue, if in fact it was a security related issue.
1. What is the timing of the timeout 1hr, 2hr, or sporadic?
2. Which application similar to MS P is being considered? -
These two problems take please with a frequency that has nearly rendered this thing useless. The platform is Wondiws XP Pro (all current patches).
Plug the Nano in, not logged ini yet, 50% of the time the Nano turns on and then just hangs. Does not appear to charge and buttons do not function. Just sits there. I have to disconnect it and let the battery run down completely. Then plug it back in and all is well.
Second issue is iTunes. Version 6 and 6.01 (current). Under Windows it appears that the network I/O is blocked (read, non-blocking I/O). It just hangs while it tries to download PodCast. It ties up system resources and no other Apps will run as well. I have to reboot or sit there an wait until the sites timeout.
Both issues are total turn offs to this combination. Although the iTunes issue is independant of the Nano.Gerhardt,
Try resetting the Nano "by toggling the Hold switch on and off (set it to Hold, and then turn it off again). Then press and hold the Center and Menu buttons for at least 6 seconds, until the Apple logo appears" or "restore your iPod using the latest iPod Installer."
For your second issue, enabling your firewall to work with iTunes.
Hawk -
Windows 8.1 Lock Screen drops network connectivity when screen locked using Win+L
Hi!
I was sent here from Microsoft Community forum. The question is:
Since Windows NT 4.0 I'm using Lock Screen to prevent people from accessing my computer when I'm leaving my room. First I was using CTRL+ALT+DEL / Lock Screen, then switched to Win+L keyboard shortcut when it was first introduced.
Everything was fine until I switched to Windows 8.1 computer (Sony Vaio Duo 13 with Broadcom wireless network controller). This machine is 8.1, not 8.0 upgraded to 8.1.
My problem is that when I hit Win+L combo the Lock Screen (with clock etc.) is displayed. Then, despite I have configured not to turn off display, the screen goes blank (after 30 seconds since lock) and network connectivity is cut off from desktop
apps (I suspect the system goes into Active Standby mode, because Modern UI apps like Tune-In radio keep working fine).
100% repeatable scenarios:
## Scenario 1 ##
1) Log in
2) Open desktop app that uses network connectivity. Outlook 2013 from Office365 subscription
3) Check that it has connected
4) Lock screen (Win+L)
5) Wait for 30 seconds (first incorrectly posted as few minutes) as screen goes black
6) Unlock screen (using password)
7) In right corner of Outlook app you will see "Unable to connect with Exchange server" and few seconds later it will reconnect sucessfuly
## Scenario 2 - the more annoying ##
1) Log in to Win 8.1 computer
2) Connect to it using SMB (in my case I wanted to transfer 30 GB of files from local hard drive C: to server) \\COMPUTER-NAME\c$ from Windows Server 2012 R2
3) Start copying files from computer to server
4) Lock the screen on computer
5) As soon as screen goes black server displays message "Lost connection to the resource. Try again?"
6) Unlock screen on the computer
7) Click "Try again" and it will continue copying files
My power settings are set to go into stand by after 5 hours and if I not lock the screen it doesn't go to sleep before 5 hours.
When I lock the screen using Win+L it goes into (probably Active) Standby mode.
Is there any way to prevent it from going to Active Standby when locking screen? I need the screen lock for security reasons but I don't want it to drop my network connectivity on remote desktops, file transfers and other desktop activities before 5 hour
timeout.
This issue is not related to more or less known wireless network connectivity problem that happens to many Intel Haswell computers. Mine doesn't exhibit those problems. I can easly push 100 - 200 GB of wireless data without network drops.
Computer information:
Sony Vaio Duo 13: SVD1322C5E
Intel Core i5-4200U
8 GB RAM
Windows 8.1 Pro 64-bit
Broadcom 802.11n SDIO network adapter
Originally posted at: http://answers.microsoft.com/en-us/windows/forum/windows8_1-networking/windows-81-lock-screen-drops-network-connectivity/099f16bd-b00d-4ba9-b833-48bf1d55ffe4
Best regards,
SergiuszSame issue here using Surface 3 Pro with either internal WLAN or MS USB LAN Adapter. I'm frequently used to keep open connections over SSH to some servers. On switching to lock screen explicitly by pressing Win+L or implicitly due to idle timeout all
connections to servers are lost. In addition, I don't get any notifications on incoming Skype messages (using Skype for desktop) when lock screen is active.
Neither NIC is showing "Power Management Tab" according to step 5 of instructions above.
Additionally observing USB LAN NIC seems to be kept active after activating lock screen, but traffic stops (according to its flashing light) when lock screen is switching off display. Blanking display doesn't seem to be adjustable in System Settings (Energy
Options accessed through Win+X).
Find attached log file of powercfg -energy -duration 300 ...
Log file is in German. It basically claims unset timeouts for deactivating display while running attached to power supply though lock screen is turning off displays within 1-2 minutes.
Energieeffizienzdiagnose-Bericht
Computername
KRITIAS
Überprüfungszeit
2015-01-10T15:07:47Z
Überprüfungsdauer
353 Sekunden
Systemhersteller
Microsoft Corporation
Systemproduktname
Surface Pro 3
BIOS-Datum
10/16/2014
BIOS-Version
3.11.0350
Betriebssystembuild
9600
Plattformrolle
PlatformRoleSlate
Netzbetrieb
true
Prozessanzahl
67
Threadanzahl
1319
Berichts-GUID
{1a168801-c189-46fe-811c-235e6bf2bd0d}
Analyseergebnisse
Fehler
Energierichtlinie:Verdunkelungszeitlimit ist deaktiviert (Netzbetrieb)
Der Bildschirm ist nicht so konfiguriert, dass er nach einer Zeit der Inaktivität verdunkelt wird.
Energierichtlinie:Standbyzeitlimit ist deaktiviert (Netzbetrieb)
Der Computer ist nicht so konfiguriert, dass nach einer Zeit der Inaktivität automatisch der Wechsel in den Standbymodus erfolgt.
CPU-Auslastung:Prozessorauslastung ist hoch
Die durchschnittliche Prozessorauslastung während der Ablaufverfolgung war sehr hoch. Das System verbraucht weniger Energie, wenn die durchschnittliche Prozessorauslastung sehr niedrig ist. Überprüfen Sie die Prozessorauslastung für einzelne Prozesse,
um festzustellen, welche Anwendungen und Dienste den größten Anteil an der Gesamtprozessorauslastung haben.
Durchschnittliche Auslastung (%)
45.31
Warnungen
Plattform-Zeitgeberauflösung:Plattform-Zeitgeberauflösung
Die standardmäßige Plattform-Zeitgeberauflösung beträgt 15,6 ms (15625000 ns) und sollte immer dann verwendet werden, wenn sich das System im Leerlauf befindet. Wenn die Zeitgeberauflösung erhöht wird, sind die Technologien zur Prozessorenergieverwaltung
möglicherweise nicht wirksam. Die erhöhte Zeitgeberauflösung kann auf eine Multimediawiedergabe oder Grafikanimationen zurückzuführen sein.
Aktuelle Zeitgeberauflösung (100-ns-Einheiten)
10007
Maximale Zeitgeberperiode (100-ns-Einheiten)
156250
Plattform-Zeitgeberauflösung:Ausstehende Zeitgeberanforderung
Von einem Programm oder Dienst wurde eine Zeitgeberauflösung angefordert, die kleiner als die maximale Zeitgeberauflösung der Plattform ist.
Angeforderter Zeitraum
10000
ID des anfordernden Prozesses
3476
Pfad des anfordernden Prozesses
\Device\HarddiskVolume4\Program Files (x86)\Adobe\Adobe Creative Cloud\ACC\Creative Cloud.exe
Energierichtlinie:Bildschirmzeitlimit ist lang (Netzbetrieb)
Der Bildschirm ist so konfiguriert, dass er nach mehr als 10 Minuten Inaktivität ausgeschaltet wird.
Zeitlimit (Sekunden)
900
USB-Standbymodus:Vom USB-Gerät wird nur selten in den Modus für selektives Energiesparen gewechselt.
Von diesem Gerät wurde während der Ablaufverfolgung nur unregelmäßig in den Modus für selektives Energiesparen gewechselt. Die Prozessorenergieverwaltung ist möglicherweise nicht möglich, wenn sich dieses USB-Gerät nicht im Modus für selektives Energiesparen
befindet. Dieses Problem verhindert jedoch nicht den Wechsel des Systems in den Standbymodus.
Gerätename
USB-Verbundgerät
Hostcontroller-ID
PCI\VEN_8086&DEV_9C31
Hostcontrollerspeicherort
PCI bus 0, device 20, function 0
Geräte-ID
USB\VID_05AC&PID_0250
Portpfad
1,2
Standbydauer (%)
14
USB-Standbymodus:Vom USB-Gerät wird nur selten in den Modus für selektives Energiesparen gewechselt.
Von diesem Gerät wurde während der Ablaufverfolgung nur unregelmäßig in den Modus für selektives Energiesparen gewechselt. Die Prozessorenergieverwaltung ist möglicherweise nicht möglich, wenn sich dieses USB-Gerät nicht im Modus für selektives Energiesparen
befindet. Dieses Problem verhindert jedoch nicht den Wechsel des Systems in den Standbymodus.
Gerätename
Surface Ethernet Adapter
Hostcontroller-ID
PCI\VEN_8086&DEV_9C31
Hostcontrollerspeicherort
PCI bus 0, device 20, function 0
Geräte-ID
USB\VID_045E&PID_07AB
Portpfad
1,1
Standbydauer (%)
5
USB-Standbymodus:Vom USB-Gerät wird nur selten in den Modus für selektives Energiesparen gewechselt.
Von diesem Gerät wurde während der Ablaufverfolgung nur unregelmäßig in den Modus für selektives Energiesparen gewechselt. Die Prozessorenergieverwaltung ist möglicherweise nicht möglich, wenn sich dieses USB-Gerät nicht im Modus für selektives Energiesparen
befindet. Dieses Problem verhindert jedoch nicht den Wechsel des Systems in den Standbymodus.
Gerätename
Generischer USB-Hub
Hostcontroller-ID
PCI\VEN_8086&DEV_9C31
Hostcontrollerspeicherort
PCI bus 0, device 20, function 0
Geräte-ID
USB\VID_05AC&PID_1006
Portpfad
1
Standbydauer (%)
5
USB-Standbymodus:Vom USB-Gerät wird nur selten in den Modus für selektives Energiesparen gewechselt.
Von diesem Gerät wurde während der Ablaufverfolgung nur unregelmäßig in den Modus für selektives Energiesparen gewechselt. Die Prozessorenergieverwaltung ist möglicherweise nicht möglich, wenn sich dieses USB-Gerät nicht im Modus für selektives Energiesparen
befindet. Dieses Problem verhindert jedoch nicht den Wechsel des Systems in den Standbymodus.
Gerätename
USB-Eingabegerät
Hostcontroller-ID
PCI\VEN_8086&DEV_9C31
Hostcontrollerspeicherort
PCI bus 0, device 20, function 0
Geräte-ID
USB\VID_045E&PID_0797
Portpfad
1,3
Standbydauer (%)
14
CPU-Auslastung:Einzelner Prozess mit erheblicher Prozessorauslastung
Auf diesen Prozess ist ein erheblicher Anteil der Gesamtprozessorauslastung zurückzuführen, die während der Ablaufverfolgung aufgezeichnet wurde.
Prozessname
firefox.exe
PID
5968
Durchschnittliche Auslastung (%)
1.57
Modul
Durchschnittliche Modulauslastung (%)
\Device\HarddiskVolume4\Program Files (x86)\Mozilla Firefox\xul.dll
0.60
\Device\HarddiskVolume4\Program Files (x86)\Mozilla Firefox\mozjs.dll
0.27
\SystemRoot\system32\ntoskrnl.exe
0.16
CPU-Auslastung:Einzelner Prozess mit erheblicher Prozessorauslastung
Auf diesen Prozess ist ein erheblicher Anteil der Gesamtprozessorauslastung zurückzuführen, die während der Ablaufverfolgung aufgezeichnet wurde.
Prozessname
System
PID
4
Durchschnittliche Auslastung (%)
0.59
Modul
Durchschnittliche Modulauslastung (%)
\SystemRoot\system32\ntoskrnl.exe
0.24
\SystemRoot\system32\DRIVERS\igdkmd64.sys
0.12
\SystemRoot\system32\DRIVERS\avc3.sys
0.07
CPU-Auslastung:Einzelner Prozess mit erheblicher Prozessorauslastung
Auf diesen Prozess ist ein erheblicher Anteil der Gesamtprozessorauslastung zurückzuführen, die während der Ablaufverfolgung aufgezeichnet wurde.
Prozessname
dwm.exe
PID
6264
Durchschnittliche Auslastung (%)
0.47
Modul
Durchschnittliche Modulauslastung (%)
\SystemRoot\system32\ntoskrnl.exe
0.10
\Device\HarddiskVolume4\Windows\System32\dwmcore.dll
0.09
\SystemRoot\System32\drivers\dxgkrnl.sys
0.06
CPU-Auslastung:Einzelner Prozess mit erheblicher Prozessorauslastung
Auf diesen Prozess ist ein erheblicher Anteil der Gesamtprozessorauslastung zurückzuführen, die während der Ablaufverfolgung aufgezeichnet wurde.
Prozessname
Skype.exe
PID
11008
Durchschnittliche Auslastung (%)
0.26
Modul
Durchschnittliche Modulauslastung (%)
\Device\HarddiskVolume4\Program Files (x86)\Skype\Phone\Skype.exe
0.11
\SystemRoot\system32\ntoskrnl.exe
0.05
\SystemRoot\System32\win32k.sys
0.04
CPU-Auslastung:Einzelner Prozess mit erheblicher Prozessorauslastung
Auf diesen Prozess ist ein erheblicher Anteil der Gesamtprozessorauslastung zurückzuführen, die während der Ablaufverfolgung aufgezeichnet wurde.
Prozessname
svchost.exe
PID
1528
Durchschnittliche Auslastung (%)
0.25
Modul
Durchschnittliche Modulauslastung (%)
\SystemRoot\system32\ntoskrnl.exe
0.16
\Device\HarddiskVolume4\Windows\System32\ntdll.dll
0.02
\SystemRoot\system32\drivers\ndis.sys
0.01
Informationen
Plattform-Zeitgeberauflösung:Zeitgeberanforderungsstapel
Der Stapel mit den Modulen, die für die niedrigste Plattform-Zeitgebereinstellung in diesem Prozess verantwortlich sind.
Angeforderter Zeitraum
10000
ID des anfordernden Prozesses
3476
Pfad des anfordernden Prozesses
\Device\HarddiskVolume4\Program Files (x86)\Adobe\Adobe Creative Cloud\ACC\Creative Cloud.exe
Aufrufender Modulstapel
\Device\HarddiskVolume4\Windows\SysWOW64\ntdll.dll
\Device\HarddiskVolume4\Windows\SysWOW64\kernel32.dll
\Device\HarddiskVolume4\Windows\SysWOW64\d3d9.dll
\Device\HarddiskVolume4\Program Files (x86)\Adobe\Adobe Creative Cloud\CEF\libcef.dll
\Device\HarddiskVolume4\Windows\SysWOW64\kernel32.dll
\Device\HarddiskVolume4\Windows\SysWOW64\ntdll.dll
Energierichtlinie:Aktiver Energieplan
Der derzeit verwendete Energieplan.
Planname
Ausbalanciert (OEM)
Plan-GUID
{381b4222-f694-41f0-9685-ff5bb260df2e}
Energierichtlinie:Energieplancharakter (Akkubetrieb)
Der Charakter des aktuellen Energieplans, wenn das System im Akkubetrieb ausgeführt wird.
Charakter
Ausbalanciert
Energierichtlinie:Videoqualität (Akkubetrieb)
Ermöglicht Windows Media Player, bei der Videowiedergabe die Qualität und die Energieeinsparung zu optimieren.
Qualitätsmodus
Videoqualität und Energieeinsparung ausbalancieren
Energierichtlinie:Energieplancharakter (Netzbetrieb)
Der Charakter des aktuellen Energieplans, wenn das System im Netzbetrieb ausgeführt wird.
Charakter
Ausbalanciert
Energierichtlinie:802.11-Energierichtlinie für Drahtlosverbindungen ist "Maximale Leistung" (Netzbetrieb)
Die aktuelle Energierichtlinie für 802.11-kompatible Drahtlosnetzwerkadapter ist nicht für die Verwendung von Energiesparmodi konfiguriert.
Energierichtlinie:Videoqualität (Netzbetrieb)
Ermöglicht Windows Media Player, bei der Videowiedergabe die Qualität und die Energieeinsparung zu optimieren.
Qualitätsmodus
Für hohe Videoqualität optimieren
Systemverfügbarkeitsanforderungen:Erfolgreiche Analyse
Die Analyse war erfolgreich. Es wurden keine Energieeffizienzprobleme festgestellt und keine Informationen zurückgegeben.
Akku:Akkuinformationen
Akku-ID
1F11LGC_LGCX863568
Hersteller
LGC_LGC
Seriennummer
1F11
Chemie
LION
Langfristig
1
Versiegelt
0
Zyklusanzahl
33
Vorgesehene Akkukapazität
42157
Letzte vollständige Aufladung
44209
Funktionen der Plattformenergieverwaltung:Unterstützte Standbystatus
Mithilfe von Standbystatus kann der Computer nach einer Zeit der Inaktivität in einen Energiesparmodus wechseln. Der S3-Standbystatus ist der standardmäßige Standbystatus für Windows-Plattformen. Im S3-Standbystatus verbraucht der Computer nur die Energie,
die notwendig ist, um den Arbeitsspeicherinhalt zu bewahren und die Arbeit mit dem Computer schnell fortsetzen zu können. Sehr wenige Plattformen unterstützen den S1- oder S2-Standbystatus.
S1-Standbymodus unterstützt
false
S2-Standbymodus unterstützt
false
S3-Standbymodus unterstützt
false
S4-Standbymodus unterstützt
true
Funktionen der Plattformenergieverwaltung:Unterstützung von Verbindungsstandby
Mit dem Verbindungsstandby kann der Computer in einen Stromsparmodus wechseln, in dem er immer eingeschaltet und verbunden ist. Der Verbindungsstandby wird soweit unterstützt anstelle der Systemstandbystatus verwendet.
Verbindungsstandby unterstützt
true
Funktionen der Plattformenergieverwaltung:Die adaptive Bildschirmhelligkeit wird unterstützt.
Dieser Computer ermöglicht die automatische Helligkeitsregelung der integrierten Anzeige durch Windows.
Funktionen der Plattformenergieverwaltung:Funktionen zur Prozessorenergieverwaltung
Mithilfe einer effektiven Prozessorenergieverwaltung kann der Computer Leistung und Energieverbrauch automatisch ausbalancieren.
Gruppieren
0
Index
0
Leerlaufstatus - Anzahl
11
Leerlaufstatustyp
Micro-Energiemodul-Plug-In
Nennfrequenz (MHz)
2301
Prozentuale maximale Leistung
100
Prozentuale niedrigste Leistung
32
Prozentuale niedrigste Drosselung
3
Leistungssteuerelementtyp
ACPI-Leistungszustände (P)/ACPI-Drosselungszustände (T)
Funktionen der Plattformenergieverwaltung:Funktionen zur Prozessorenergieverwaltung
Mithilfe einer effektiven Prozessorenergieverwaltung kann der Computer Leistung und Energieverbrauch automatisch ausbalancieren.
Gruppieren
0
Index
1
Leerlaufstatus - Anzahl
11
Leerlaufstatustyp
Micro-Energiemodul-Plug-In
Nennfrequenz (MHz)
2301
Prozentuale maximale Leistung
100
Prozentuale niedrigste Leistung
32
Prozentuale niedrigste Drosselung
3
Leistungssteuerelementtyp
ACPI-Leistungszustände (P)/ACPI-Drosselungszustände (T)
Funktionen der Plattformenergieverwaltung:Funktionen zur Prozessorenergieverwaltung
Mithilfe einer effektiven Prozessorenergieverwaltung kann der Computer Leistung und Energieverbrauch automatisch ausbalancieren.
Gruppieren
0
Index
2
Leerlaufstatus - Anzahl
11
Leerlaufstatustyp
Micro-Energiemodul-Plug-In
Nennfrequenz (MHz)
2301
Prozentuale maximale Leistung
100
Prozentuale niedrigste Leistung
32
Prozentuale niedrigste Drosselung
3
Leistungssteuerelementtyp
ACPI-Leistungszustände (P)/ACPI-Drosselungszustände (T)
Funktionen der Plattformenergieverwaltung:Funktionen zur Prozessorenergieverwaltung
Mithilfe einer effektiven Prozessorenergieverwaltung kann der Computer Leistung und Energieverbrauch automatisch ausbalancieren.
Gruppieren
0
Index
3
Leerlaufstatus - Anzahl
11
Leerlaufstatustyp
Micro-Energiemodul-Plug-In
Nennfrequenz (MHz)
2301
Prozentuale maximale Leistung
100
Prozentuale niedrigste Leistung
32
Prozentuale niedrigste Drosselung
3
Leistungssteuerelementtyp
ACPI-Leistungszustände (P)/ACPI-Drosselungszustände (T)
Gerätetreiber:Erfolgreiche Analyse
Die Analyse war erfolgreich. Es wurden keine Energieeffizienzprobleme festgestellt und keine Informationen zurückgegeben. -
Import Script Failing Sporadically
The script ran fine for a year, then it began failing sporadically. I suspect it's related to a DB timeout or network issue, but I can't pinpoint the issue. I added some basic logging and error trapping, but it isn't enough to go on. Any ideas on how to continue troubleshooting?
Function FDM_JDE_Connect(strLoc, lngCatKey, dblPerKey, strWorkTableName)
' Date Person Modification
' 20131024 Jeff McAhren Cleaned up code, added logging
Dim cnSS ' Integration Connection
Dim strSQL ' SQL statement for V_HFM_LOAD
Dim rs ' v_HFM_LOAD Recordset
Dim rsAppend ' tTB table append rs object
Dim strMonth
Dim strYear
Dim strJDEMonthCol
Dim r
WriteLog "~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~"
WriteLog "FDM_JDE_Connect Starting"
WriteLog "strLoc = " & strLoc
WriteLog "lngCatKey = " & lngCatKey
WriteLog "dblPerKey = " & dblPerKey
WriteLog "strWorkTableName = " & strWorkTableName
Set cnSS = CreateObject("ADODB.Connection")
Set rs = CreateObject("ADODB.Recordset")
Set rsAppend = DW.DataAccess.farsTableAppend(strWorkTableName)
'Connect to the Integration database
cnSS.open "Provider=SQLOLEDB.1;Password=mypassword;Persist Security Info=True;User ID=myuser;Initial Catalog=mydatabase;Data Source=mydb;"
WriteLog "Connected to Integration Database; Err = " & Err & " - " & Err.Description
strMonth = RIGHT("0" & Month(RES.PstrPer),2)
strJDEMonthCol="GBAN" & strMonth
strYear = Year(RES.PstrPer)
strSQL = "SELECT DATAVIEW, YEAR, PERIOD, ENTITY, ACCOUNT, CUSTOM1, CUSTOM2, CUSTOM3, CUSTOM4, AMOUNT " &_
"FROM V_HFM_LOAD WHERE PERIOD = " & strMonth & " and (YEAR = " & strYear & " or YEAR = '')"
rs.Open strSQL, cnSS
WriteLog "rs recordset opened; Err = " & Err & " - " & Err.Description
'Check for data
If rs.bof And rs.eof Then
RES.PlngActionType = 2
RES.PstrActionValue = "No Records to load!"
WriteLog "No records to load, exiting function; Err = " & Err & " - " & Err.Description
Exit Function
End If
'Loop through records and append to tTB table in location's DB, use records returned from the strSQL query
If Not rs.bof And Not rs.eof Then
WriteLog "Entering do/while loop; Err = " & Err & " - " & Err.Description
Do While Not rs.eof
r = r + 1
rsAppend.AddNew
If err <> 0 Then WriteLog "*** ERROR EXECUTING ADDNEW - RECORD: " & r & " - Error: " & err & " - " & Err.Description
rsAppend.Fields("PartitionKey") = RES.PlngLocKey
rsAppend.Fields("CatKey") = RES.PlngCatKey
rsAppend.Fields("PeriodKey") = RES.PdtePerKey
rsAppend.Fields("DataView") = rs.fields("DATAVIEW").Value
rsAppend.Fields("CalcAcctType") = 9
rsAppend.Fields("Amount") = rs.fields("AMOUNT").Value
rsAppend.Fields("Desc1") = rs.fields("ACCOUNT").Value
rsAppend.Fields("Account") = rs.fields("ACCOUNT").Value
rsAppend.Fields("Entity") = rs.fields("ENTITY").Value
rsAppend.Fields("ICP") = "[ICP None]"
rsAppend.Fields("UD1") = rs.fields("CUSTOM1").Value
rsAppend.Fields("UD2") = rs.fields("CUSTOM2").Value
rsAppend.Fields("UD3") = rs.fields("CUSTOM3").Value
rsAppend.Fields("UD4") = rs.fields("CUSTOM4").Value
rsAppend.Update
If err <> 0 Then WriteLog "*** ERROR EXECUTING UPDATE - RECORD: " & r & " - Error: " & err & " - " & Err.Description
If r / 10000 = Int(r / 10000) Then WriteLog "Status Update Record: " & r
rs.movenext
If err <> 0 Then WriteLog "*** ERROR EXECUTING MOVENEXT - RECORD: " & r & " - Error: " & err & " - " & Err.Description
Loop
WriteLog "Exiting do/while loop; recordcount = " & r & "; Err = " & Err & Err.Description
End If
rs.close
rsAppend.close
WriteLog "Recordsets closed, exiting function; Err = " & Err & Err.Description
'Assign Return value
FDM_JDE_Connect = True
End Function
Sub WriteLog(LogMessage)
Dim objLogFile
Dim FSO
Set fso = CreateObject("Scripting.FileSystemObject")
Set objLogFile = fso.OpenTextFile("d:\scripts\HFM\FDM_JDE_Connect.log", 8, True) '8=ForAppending
objLogFile.Writeline (Now() & ": " & LogMessage)
objLogFile.Close
Set objLogFile = Nothing
End SubOh, and there is this:
** Begin FDM Runtime Error Log Entry [2013-10-28 16:07:18] **
ERROR:
Code............................................. -2147467259
Description...................................... File [07^JDE^Actual^Jul - 2013^RR.txt] Caused Error: (Query timeout expired At line: 99) <=== LINE 99 is the "LOOP" Statement
Procedure........................................ clsBatchLoader.mFileCollectionProcess
Component........................................ upsWBatchLoaderDM
Version.......................................... 1112
Thread........................................... 5844
IDENTIFICATION:
User............................................. sys_jde_load
Computer Name.................................... MyServer
App Name......................................... BBCFDM
Client App....................................... WebClient
CONNECTION:
Provider......................................... SQLOLEDB
Data Server...................................... MyDBServer
Database Name.................................... BBCFDM
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... JDE
Location ID...................................... 749
Location Seg..................................... 3
Category......................................... ACTUAL
Category ID...................................... 13
Period........................................... Jul - 2013
Period ID........................................ 7/31/2013
POV Local........................................ False
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... False -
Need help in migrating MSSQL 2008 database to Oracle 11g
Hi everyone,
So, as stated above I want to migrate our apps database from mssql to oracle as it is what the client wants..
I have absolutely no experience working with Oracle.
My computer is running windows 7 32 bit, our DB people installed a 9i client for me to connect to the server and the my SQL Developer just came straight from the site. (So it's the latest release)
I have one "DBA" access to the database I'm trying to migrate to.
I've downloaded the Oracle SQL Developer and have been attempting to "migrate" our database using the migration tool for 3 days now, but to no avail.
So the error I'm encountering is that the migration just stops, and a popup with the message "Migration actions have failed. Check the migration reports for details. : The connection is closed." comes up.
I have no idea where the migration report can be found. As I cannot find it in the reports tab available.
I'm hoping someone here can have the patience and knowledge to get me through this?The migration report is generally created under the "Documents and Settings" folder under application data/sqldeveloper. Key thing is at what stage the failure occurs?. Does it happen immediately after you start the data migration or after a while?.
If the data migration process fails immediately after the start then there might be an issue with permissions on the source/target databases. Probably it is having trouble with disabling constraints on the target database. Because rememeber SQL Developer will disable constraints before it moves data across. My preference is to give DBA privilege to the Oracle user to avoid just cases or you can disable the constraints yourself by using scripts. Check the source/target database date/time format masks. You can set them up in SQL Developer.
If the data migration process fails after a while and you notice that data for some tables is migrated then you may be running into network timeouts or space issues on Oracle etc.
HTH
Regards
Prakash -
Bottleneck in Large file processing
Hi,
We are experiencing timeout and memory issues in large file processings. I want to know wheather J2EE adapter engine or Integration engine is the bottleneck in processing large messages like over 300 MB files without splitting the files.
Thanks
SteveHi Mario,
We are testing a scenario to find out what is the maximum file size that XI can handle based on the blog
( /people/william.li/blog/2006/09/08/how-to-send-any-data-even-binary-through-xi-without-using-the-integration-repository) without any mapping. Upto 20 MB it works Ok and after that we are getting timeout error .
Data from Moni:
com.sap.engine.services.httpserver.exceptions.HttpIOException: Read timeout. The client has disconnected or a synchronization error has occurred. Read [1704371] bytes. Expected [33353075]. at com.sap.engine.services.httpserver.server.io.HttpInputStream.read(HttpInputStream.java:186) at com.sap.aii.af.service.util.ChunkedByteArrayOutputStream.write(ChunkedByteArrayOutputStream.java:181) at com.sap.aii.af.ra.ms.transport.TransportBody.<init>(TransportBody.java:99) at com.sap.aii.af.ra.ms.impl.core.transport.http.MessagingServlet.doPost
This could be due to ICM timeout settings which we are planning to increase.
I would like to hear from others experience of maximum file size that they could process. Ofcouse I do know that it depends on the environment.
Thanks
Steve -
Hi ,
I have a to call a Function Module and if it finishes successfully i have to send a mail to users intimating the same.
The function module typically takes around 7 mins to finish because of the large number of transactions that have to be processed.
If I make a call from XI to this FM through the RFC adapter, will the call timeout?
Or is timeout not an issue?
Where is this setting maintained and how do i see the value?I have a to call a Function Module and if it finishes successfully i have to send a mail to users intimating the same.
The function module typically takes around 7 mins to finish because of the large number of transactions that have to be processed
Considering the above two requirements it is better to go for an Async call to your FM....let it take its own time....once done configure another scenario (RFC --> XI/ PI --> Mail) to send the success mail.
Regards,
Abhishek.
Maybe you are looking for
-
Dynamically changing the Graph in Obiee 11g
Hi, Is there a way to reflect the latest data in a graph by clicking any hierarchy level ? say i have top level company----->>department------->>account. if i come to department level then the graph should display department data in the graph.But in
-
How do I scan & save a PDF in just ONE step?
How do I scan & save a PDF in just ONE step? I can easily scan a document to an OCR'd PDF, but it does not seem to save it until I manually select "save". Seems there should be a way to set up scans to a particular folder destination, with a naming c
-
Hi Experts, This is with reference to Logical Database (LDB) , I have some Doubts\Clarifications , 1, What is the Significance of the Hierarchy of LDB structure (I.e Nodes\Tables).? 2, How to find the relation between to Nodes\Tables that is wi
-
Dynamic Disk Support in Azure Pack
Is Dynamic Disk supported to be added into a VM that is part of a cloud through Windows Azure Pack?
-
Movable components interacting with JScrollPane
I am creating movable components. The class is designed as an extension to JPanel and contains a label and a textfield. The Panel responds to the mouse and moves itself around a JPanel which is inside the JScrollPane according to the user. This will