Radeon on linux 3.10 UVD problem
I have AMD HD7640G and AMD HD7670M in my laptop. When Arch release linux 3.10, the first thing I do is trying the new UVD feature.
But i can not use UVD/vdpau to accelerate a mp4 test video. Use -vo vdpau can not reduce cpu useage.
dmesg | grep -e radeon -e drm
[ 8.728270] [drm] Initialized drm 1.1.0 20060810
[ 8.879001] [drm] radeon kernel modesetting enabled.
[ 8.879047] fb: conflicting fb hw usage radeondrmfb vs EFI VGA - removing generic driver
[ 8.879639] [drm] initializing kernel modesetting (ARUBA 0x1002:0x9903 0x1025:0x0697).
[ 8.879726] [drm] register mmio base: 0xF0500000
[ 8.879729] [drm] register mmio size: 262144
[ 8.879758] [drm] ACPI VFCT contains a BIOS for 00:01.0 1002:9903, size 20480
[ 8.879839] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 8.879843] radeon 0000:00:01.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[ 8.880507] [drm] Detected VRAM RAM=512M, BAR=256M
[ 8.880513] [drm] RAM width 64bits DDR
[ 8.880654] [drm] radeon: 512M of VRAM memory ready
[ 8.880656] [drm] radeon: 512M of GTT memory ready.
[ 9.136594] radeon 0000:00:01.0: ffff880223659000 unpin not necessary
[ 9.281857] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc9000aa6ca18
[ 9.281868] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 9.282782] [drm] Loading ARUBA Microcode
[ 9.387132] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 9.387257] radeon 0000:00:01.0: WB enabled
[ 9.387261] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88021f06cc00
[ 9.389864] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000179a18 and cpu addr 0xffffc9000b335a18
[ 9.389872] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0xffff88021f06cc04
[ 9.389877] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0xffff88021f06cc08
[ 9.389882] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff88021f06cc0c
[ 9.389885] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10 and cpu addr 0xffff88021f06cc10
[ 9.389890] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 9.389892] [drm] Driver supports precise vblank timestamp query.
[ 9.389922] radeon 0000:00:01.0: irq 47 for MSI/MSI-X
[ 9.389940] radeon 0000:00:01.0: radeon: using MSI.
[ 9.390221] [drm] radeon: irq initialized.
[ 9.411500] [drm] ring test on 0 succeeded in 2 usecs
[ 9.411564] [drm] ring test on 3 succeeded in 2 usecs
[ 9.411572] [drm] ring test on 4 succeeded in 1 usecs
[ 9.466656] [drm] ring test on 5 succeeded in 1 usecs
[ 9.466661] [drm] UVD initialized successfully.
[ 9.490236] [drm] ib test on ring 0 succeeded in 0 usecs
[ 9.490769] [drm] ib test on ring 3 succeeded in 0 usecs
[ 9.491310] [drm] ib test on ring 4 succeeded in 1 usecs
[ 9.512275] [drm] ib test on ring 5 succeeded
[ 9.534481] [drm] radeon atom DIG backlight initialized
[ 9.534484] [drm] Radeon Display Connectors
[ 9.534486] [drm] Connector 0:
[ 9.534488] [drm] eDP-1
[ 9.534489] [drm] HPD1
[ 9.534491] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 9.534493] [drm] Encoders:
[ 9.534494] [drm] LCD1: INTERNAL_UNIPHY2
[ 9.534495] [drm] Connector 1:
[ 9.534497] [drm] VGA-1
[ 9.534498] [drm] HPD2
[ 9.534500] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 9.534501] [drm] Encoders:
[ 9.534502] [drm] CRT1: INTERNAL_UNIPHY2
[ 9.534503] [drm] CRT1: NUTMEG
[ 9.534505] [drm] Connector 2:
[ 9.534506] [drm] HDMI-A-1
[ 9.534507] [drm] HPD3
[ 9.534509] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[ 9.534510] [drm] Encoders:
[ 9.534512] [drm] DFP1: INTERNAL_UNIPHY
[ 9.577746] [drm] Internal thermal controller without fan control
[ 9.577776] [drm] radeon: power management initialized
[ 10.815096] [drm] fb mappable at 0xD1382000
[ 10.815101] [drm] vram apper at 0xD0000000
[ 10.815103] [drm] size 4325376
[ 10.815104] [drm] fb depth is 24
[ 10.815106] [drm] pitch is 5632
[ 10.815218] fbcon: radeondrmfb (fb0) is primary device
[ 13.071524] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[ 13.071527] radeon 0000:00:01.0: registered panic notifier
[ 13.071795] [drm] Initialized radeon 2.33.0 20080528 for 0000:00:01.0 on minor 0
[ 13.071905] radeon 0000:01:00.0: enabling device (0000 -> 0003)
[ 13.072215] [drm] initializing kernel modesetting (TURKS 0x1002:0x6840 0x1025:0x0697).
[ 13.072256] [drm] register mmio base: 0xF0400000
[ 13.072258] [drm] register mmio size: 131072
[ 23.014896] [drm] GPU not posted. posting now...
[ 23.021849] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
[ 23.021853] radeon 0000:01:00.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF
[ 23.023148] [drm] Detected VRAM RAM=2048M, BAR=256M
[ 23.023153] [drm] RAM width 128bits DDR
[ 23.023179] [drm] radeon: 2048M of VRAM memory ready
[ 23.023182] [drm] radeon: 512M of GTT memory ready.
[ 23.053072] radeon 0000:01:00.0: ffff88021c704800 unpin not necessary
[ 23.384607] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc9000b033118
[ 23.384617] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 23.385498] [drm] Loading TURKS Microcode
[ 23.419896] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 23.420053] radeon 0000:01:00.0: WB enabled
[ 23.420060] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88021da91c00
[ 23.420065] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88021da91c0c
[ 23.422451] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000174118 and cpu addr 0xffffc9000d5b2118
[ 23.422458] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 23.422460] [drm] Driver supports precise vblank timestamp query.
[ 23.422501] radeon 0000:01:00.0: irq 50 for MSI/MSI-X
[ 23.422524] radeon 0000:01:00.0: radeon: using MSI.
[ 23.422578] [drm] radeon: irq initialized.
[ 23.439430] [drm] ring test on 0 succeeded in 1 usecs
[ 23.439495] [drm] ring test on 3 succeeded in 1 usecs
[ 23.625722] [drm] ring test on 5 succeeded in 1 usecs
[ 23.625727] [drm] UVD initialized successfully.
[ 23.626190] [drm] ib test on ring 0 succeeded in 0 usecs
[ 23.626247] [drm] ib test on ring 3 succeeded in 0 usecs
[ 23.778131] [drm] ib test on ring 5 succeeded
[ 23.778414] [drm] Radeon Display Connectors
[ 23.784607] [drm] Internal thermal controller without fan control
[ 23.785679] [drm] radeon: power management initialized
[ 23.785872] radeon 0000:01:00.0: No connectors reported connected with modes
[ 23.785876] [drm] Cannot find any crtc or sizes - going 1024x768
[ 23.787403] [drm] fb mappable at 0xE0375000
[ 23.787405] [drm] vram apper at 0xE0000000
[ 23.787406] [drm] size 3145728
[ 23.787407] [drm] fb depth is 24
[ 23.787409] [drm] pitch is 4096
[ 23.787569] radeon 0000:01:00.0: fb1: radeondrmfb frame buffer device
[ 23.788017] [drm:radeon_acpi_init] *ERROR* Cannot find a backlight controller
[ 23.788236] [drm] Initialized radeon 2.33.0 20080528 for 0000:01:00.0 on minor 1
[ 88.624493] radeon: switched off
[ 88.652210] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000174118 and cpu addr 0xffffc9000a2f3118
vdpauinfo: the same sa linux 3.9.x
display: :2 screen: 0
API version: 1
Information string: G3DVL VDPAU Driver Shared Library version 1.0
Video surface:
name width height types
420 16384 16384 NV12 YV12
422 16384 16384 NV12 YV12 UYVY YUYV
444 16384 16384 NV12 YV12 Y8U8V8A8 V8U8Y8A8
Decoder capabilities:
name level macbs width height
MPEG1 16 1048576 16384 16384
MPEG2_SIMPLE 16 1048576 16384 16384
MPEG2_MAIN 16 1048576 16384 16384
Output surface:
name width height nat types
B8G8R8A8 16384 16384 y NV12 YV12 UYVY YUYV Y8U8V8A8 V8U8Y8A8
R8G8B8A8 16384 16384 y NV12 YV12 UYVY YUYV Y8U8V8A8 V8U8Y8A8
R10G10B10A2 16384 16384 y NV12 YV12 UYVY YUYV Y8U8V8A8 V8U8Y8A8
B10G10R10A2 16384 16384 y NV12 YV12 UYVY YUYV Y8U8V8A8 V8U8Y8A8
Bitmap surface:
name width height
B8G8R8A8 16384 16384
R8G8B8A8 16384 16384
R10G10B10A2 16384 16384
B10G10R10A2 16384 16384
A8 16384 16384
Video mixer:
feature name sup
DEINTERLACE_TEMPORAL -
DEINTERLACE_TEMPORAL_SPATIAL -
INVERSE_TELECINE -
NOISE_REDUCTION y
SHARPNESS y
LUMA_KEY -
HIGH QUALITY SCALING - L1 -
HIGH QUALITY SCALING - L2 -
HIGH QUALITY SCALING - L3 -
HIGH QUALITY SCALING - L4 -
HIGH QUALITY SCALING - L5 -
HIGH QUALITY SCALING - L6 -
HIGH QUALITY SCALING - L7 -
HIGH QUALITY SCALING - L8 -
HIGH QUALITY SCALING - L9 -
parameter name sup min max
VIDEO_SURFACE_WIDTH y 48 16384
VIDEO_SURFACE_HEIGHT y 48 16384
CHROMA_TYPE y
LAYERS y 0 4
attribute name sup min max
BACKGROUND_COLOR y
CSC_MATRIX y
NOISE_REDUCTION_LEVEL y 0.00 1.00
SHARPNESS_LEVEL y -1.00 1.00
LUMA_KEY_MIN_LUMA y
LUMA_KEY_MAX_LUMA y
ico wrote:yup, we need Mesa 9.2 as well.
You could use the mesa-git packages (There is even an unsigned unsigned repository)
Edit: Some feedback. MPEG and WMV3 produced a black image (Mobility Radeon HD 54XX series), both H-264 samples worked from this list:
ftp://download.nvidia.com/XFree86/vdpau … README.txt
Last edited by progandy (2013-07-11 10:02:53)
Similar Messages
-
New SAP note: "Linux: SLES 9/10, Problems with libuuid"
<a href="https://service.sap.com/sap/support/notes/1065860">#1065860</a> - Linux: SLES 9/10, Problems with libuuid
You can find a list with more notes related to SAP on Linux in the SDN Wiki: SAPonLinuxNotesthanks for the quick fix. but after we started installing the new client 6.30rev10 on the first user machines, complaints started coming in rather fast ->
it seems that in certain windows that tab-key doesnt work properly anymore. it doesnt jump from entry field to entry field anymore.
example -> transaction fb50 (Enter G/L account document)
in the fields at the top (date, reference currency) the tab works as expected.
but down in the details... it doesnt work at all, the cursor is simply gone. you have to click with the mouse in to each field to enter data.
we started with a clean settings file, tried various preferences settings in the client. no luck.
also it seems that in the preferences of the client "auto select text in insert mode" doesnt work anymore. no matter what is set there, when using the insert mode, the text is not selected.
these problems appear on machines running 10.3.9, but it doesnt matter if the Java Security update from earlier this week is installed or not, the same effect.
hmmm, did i miss some setting somethere to get this working again?
thanks
jürg -
Unable to use ATI radeon on linux 3.13
Dell Inspiron N5010 laptop
$ lspci -k | grep -A3 VGA
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV730/M96 [Mobility Radeon HD 4650/5165]
Subsystem: Dell Device 0447
Kernel driver in use: fglrx_pci
Kernel modules: radeon, fglrx
Booting using the 2014.03.01 installer (has the 3.13.5 kernel) completely hangs up my system after some initial loading. I can only boot by setting the nomodeset parameter. After installing xorg and ati drivers and rebooting, I either get a black screen, or the following errors.
Mar 10 14:21:17 sdh-archlinux kernel: [drm] Initialized drm 1.1.0 20060810
Mar 10 14:21:18 sdh-archlinux kernel: [drm] radeon kernel modesetting enabled.
Mar 10 14:21:18 sdh-archlinux kernel: fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
Mar 10 14:21:18 sdh-archlinux kernel: [drm] initializing kernel modesetting (RV730 0x1002:0x9480 0x1028:0x0447).
Mar 10 14:21:18 sdh-archlinux kernel: [drm] register mmio base: 0xFBE20000
Mar 10 14:21:18 sdh-archlinux kernel: [drm] register mmio size: 65536
Mar 10 14:21:18 sdh-archlinux kernel: [drm] Detected VRAM RAM=1024M, BAR=256M
Mar 10 14:21:18 sdh-archlinux kernel: [drm] RAM width 128bits DDR
Mar 10 14:21:18 sdh-archlinux kernel: [drm] radeon: 1024M of VRAM memory ready
Mar 10 14:21:18 sdh-archlinux kernel: [drm] radeon: 1024M of GTT memory ready.
Mar 10 14:21:18 sdh-archlinux kernel: [drm] GART: num cpu pages 262144, num gpu pages 262144
Mar 10 14:21:18 sdh-archlinux kernel: [drm] Loading RV730 Microcode
Mar 10 14:21:18 sdh-archlinux kernel: [drm] PCIE GART of 1024M enabled (table at 0x000000000025D000).
Mar 10 14:21:18 sdh-archlinux kernel: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
Mar 10 14:21:18 sdh-archlinux kernel: [drm] Driver supports precise vblank timestamp query.
Mar 10 14:21:18 sdh-archlinux kernel: [drm] radeon: irq initialized.
Mar 10 14:21:18 sdh-archlinux kernel: [drm] ring test on 0 succeeded in 1 usecs
Mar 10 14:21:18 sdh-archlinux kernel: [drm] ring test on 3 succeeded in 1 usecs
Mar 10 14:21:19 sdh-archlinux kernel: [drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
Mar 10 14:21:20 sdh-archlinux kernel: [drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
Mar 10 14:21:21 sdh-archlinux kernel: [drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
Mar 10 14:21:22 sdh-archlinux kernel: [drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
Mar 10 14:21:23 sdh-archlinux kernel: [drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
Mar 10 14:21:24 sdh-archlinux kernel: [drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
Mar 10 14:21:25 sdh-archlinux kernel: [drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
Mar 10 14:21:26 sdh-archlinux kernel: [drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
Mar 10 14:21:27 sdh-archlinux kernel: [drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
Mar 10 14:21:28 sdh-archlinux kernel: [drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
Mar 10 14:21:28 sdh-archlinux kernel: [drm:uvd_v1_0_start] *ERROR* UVD not responding, giving up!!!
Mar 10 14:21:28 sdh-archlinux kernel: [drm:rv770_startup] *ERROR* radeon: failed initializing UVD (-1).
Mar 10 14:21:28 sdh-archlinux kernel: [drm] Enabling audio 0 support
Mar 10 14:21:28 sdh-archlinux kernel: [drm] ib test on ring 0 succeeded in 0 usecs
Mar 10 14:21:28 sdh-archlinux kernel: [drm] ib test on ring 3 succeeded in 0 usecs
Mar 10 14:21:28 sdh-archlinux kernel: [drm] radeon atom DIG backlight initialized
Mar 10 14:21:28 sdh-archlinux kernel: [drm] Radeon Display Connectors
Mar 10 14:21:28 sdh-archlinux kernel: [drm] Connector 0:
Mar 10 14:21:28 sdh-archlinux kernel: [drm] VGA-1
Mar 10 14:21:28 sdh-archlinux kernel: [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
Mar 10 14:21:28 sdh-archlinux kernel: [drm] Encoders:
Mar 10 14:21:28 sdh-archlinux kernel: [drm] CRT1: INTERNAL_KLDSCP_DAC1
Mar 10 14:21:28 sdh-archlinux kernel: [drm] Connector 1:
Mar 10 14:21:28 sdh-archlinux kernel: [drm] HDMI-A-1
Mar 10 14:21:28 sdh-archlinux kernel: [drm] HPD1
Mar 10 14:21:28 sdh-archlinux kernel: [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
Mar 10 14:21:28 sdh-archlinux kernel: [drm] Encoders:
Mar 10 14:21:28 sdh-archlinux kernel: [drm] DFP1: INTERNAL_UNIPHY
Mar 10 14:21:28 sdh-archlinux kernel: [drm] Connector 2:
Mar 10 14:21:28 sdh-archlinux kernel: [drm] LVDS-1
Mar 10 14:21:28 sdh-archlinux kernel: [drm] DDC: 0x7f68 0x7f68 0x7f6c 0x7f6c 0x7f70 0x7f70 0x7f74 0x7f74
Mar 10 14:21:28 sdh-archlinux kernel: [drm] Encoders:
Mar 10 14:21:28 sdh-archlinux kernel: [drm] LCD1: INTERNAL_UNIPHY2
Mar 10 14:21:28 sdh-archlinux kernel: [drm] Internal thermal controller with fan control
Mar 10 14:21:28 sdh-archlinux kernel: [drm] radeon: dpm initialized
Mar 10 14:21:29 sdh-archlinux kernel: [drm] fb mappable at 0xC045E000
Mar 10 14:21:29 sdh-archlinux kernel: [drm] vram apper at 0xC0000000
Mar 10 14:21:29 sdh-archlinux kernel: [drm] size 4325376
Mar 10 14:21:29 sdh-archlinux kernel: [drm] fb depth is 24
Mar 10 14:21:29 sdh-archlinux kernel: [drm] pitch is 5632
Mar 10 14:21:29 sdh-archlinux kernel: fbcon: radeondrmfb (fb0) is primary device
Mar 10 14:21:29 sdh-archlinux kernel: [drm:rv770_dpm_set_power_state] *ERROR* rv770_restrict_performance_levels_before_switch failed
Mar 10 14:21:29 sdh-archlinux kernel: radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
Mar 10 14:21:29 sdh-archlinux kernel: [drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 0
I am currently using the legacy catalyst drivers + Xorg 1.12. It works, but it has its own set of issues (eg. screenshots not working on KDE)
Is there a easy fix for this so that I can use the open source drivers for my old ATI card or is it a kernel bug and needs to be reported upstream?Hi,
Although I'm a Ubuntu user, not Arch Linux's, but I had the same issue.
Passing radeon.dpm=0 solved the issue (as workaround).
Thank you so much for great information.
# radeon.runpm=0 doesn't solve the issue. Yeah, I firstly thought that this issue was related with acpi; I really had to use acpi=off.
[Edit]
My machine is AMD A8-6500 + MSI A78M-E35.
Without radeon.dpm=0, my machine reboots suddenly rather than blackout.
I have big difficulty of debugging.
Last edited by cielavenir (2014-04-24 03:09:01) -
Linux.32bit.Cyrillic encoding problem.
Hi!
In flash player 10 under Linux 32-bit v.10.0.22 (Slackware-current, if it helps) there is a problem with displaying cyrillic fonts.
It could be solved by changing system encoding from default UTF-8 to ru_RU.CP-1251. But it is a great headache, you know.
Hope this will be fixed soon. Besides, this problem is known to me since flash player v.9. And this wasn't fixed yet.
I don't know if there is a bug-tracker here... I didn't found one.
Thank you.public class file_encoding {
public static void main(String args[]) {
System.out.println(g("os.arch") + " " + g("os.name") + " "+ g("os.version") + " " +
g("java.vendor") + " " + g("java.version") + " " + g("java.vm.specification.version"));
System.out.println(g("file.encoding"));
static String g(String name) { return System.getProperty(name); }
$ echo $LANG
en_US.latin2
$ java file_encoding
i386 Linux 2.6.4-52-default Sun Microsystems Inc. 1.4.2_04 1.0
ANSI_X3.4-1968
$ LANG=en_Us
$ java file_encoding
i386 Linux 2.6.4-52-default Sun Microsystems Inc. 1.4.2_04 1.0
ANSI_X3.4-1968
$ LANG=en_US
$ java file_encoding
i386 Linux 2.6.4-52-default Sun Microsystems Inc. 1.4.2_04 1.0
ISO-8859-1
$ LANG=fr_FR
$ java file_encoding
i386 Linux 2.6.4-52-default Sun Microsystems Inc. 1.4.2_04 1.0
ISO-8859-1
$ LANG=ru_RU
$ java file_encoding
i386 Linux 2.6.4-52-default Sun Microsystems Inc. 1.4.2_04 1.0
ISO-8859-5 -
WindowsLookAndFeel on Linux : BIG and complete PROBLEM
Hello,
I have implemented a GUI application with the windows look and feel. I work under Linux with the jdk 1.3 and eclipse.
To run my application with the windows lf, I add the following lines in my code :
System.setProperty("os.name","Not Windows");
try {
UIManager.setLookAndFeel(new WindowsLookAndFeel());
} catch (Exception e) {
e.printStackTrace();
SwingUtilities.updateComponentTreeUI(getRootPane());
In Eclipse, it works well, but an execution from the line command in a Xterm generate the following exception :
java.lang.NumberFormatException: multiple points
at java.lang.FloatingDecimal.readJavaFormatString(FloatingDecimal.java:1073)
at java.lang.Float.valueOf(Float.java:186)
at com.sun.java.swing.plaf.windows.WindowsLookAndFeel.initialize(WindowsLookAndFeel.java:108)
It seems that the problem is caused by the following line :
System.getProperty("os.name","Not Window");
the system property os.name is parsed as a float.
what can I do to run my application with the windows lf and under linux ?
any help will be helpful
Regards,
AnneIn Eclipse, it works well, but an execution from the
line command in a Xterm generate the following
exception :
java.lang.NumberFormatException: multiple points
at
java.lang.FloatingDecimal.readJavaFormatString(Floatin
Decimal.java:1073)
at java.lang.Float.valueOf(Float.java:186)
at
com.sun.java.swing.plaf.windows.WindowsLookAndFeel.ini
ialize(WindowsLookAndFeel.java:108)Make sure that Eclipse is using the JDK matching the JRE you use to run the program (Windows/Preferences/Java/installed JREs or somesuch)
It seems that the problem is caused by the following
line :
System.getProperty("os.name","Not Window");
the system property os.name is parsed as a float.Using an official System property is shooting yourself in the foot. You can't tell what else on in the Java runtime has a depency on it. You can set your own property
for this (System.setProperty("MyFalseOpsSys","Not Windows")). I wonder what use you have for it since you force the Windows L&F anyway?
>
what can I do to run my application with the windows
lf and under linux ?
any help will be helpful Maybe find a JRE which supports it natively. Or, if you are very lucky, extract the relevant classes and resources from the JAR of a Windows JRE (in Sun's rt.jar, com/sun/java/swing/plaf/windows/) and put them into some independent JAR you add to your Linux classpath. For better luck, use the very same version for both JRE. Pray that there are no native methods involved. -
Solman 4.0 Linux Oracle Install - Label Problem
Hi All,
I'm trying to install SOLMAN 4.0 on Linux x86_64 with Oracle.
I have selected a UNICODE install, but when it comes time to specify the media location I get a message stating that it found label....
SAP:AKK:700:UKERNEL: <etc>
but that it needs....
SAP:AKK:700:KERNEL: <etc>
On the flip-side, if I attempt installing NON-UNICODE (by not putting the check in the 'unicode' checkbox) I get the message stating that it found label:
SAP:AKK:700:KERNEL: <etc>
but that it needs....
SAP:AKK:700:UKERNEL: <etc>
Am I crazy (don't answer that)????
Has anyone else expericenced this? Does anyone know how to solve this problem? Any help is appreciated!
Best Regards,
Than MartensThan,
Did you ever find a resolution to this issue.
We are experiencing the same problem on a Linux x86-64 server attempting to install Netweaver.
Thanks -
RH Linux and AQ performance problem
I am running RH Linux 7.1 with Oracle 8.1.7. My web application
works fine until a specific point when I begin using AQ. Part of
the AQ initialization in my application is to create 8 DB
connections which pole the DB every 500 ms. These connections
cause the web application to begin processing extremely slowly
(about 30 seconds between pages). There has been a proposal that
this might be due to a Linux threading issue. Any ideas?
As a side note, I first noticed the problem after recreating a DB
with the JServer option included (as I am writing Java stored
procedures too). To eliminate this from concern I have executed
jvmrm.sql to remove the java classes in the database. My
original problems continues to exist.
Thanks,
DavidI am assuming you are polling the database for messages in
queues to be dequeued every few seconds on these eigh
connections.
Suggestions -
a) why don't use notification mechanism and let the database
tell you if there is a message for you to dequeue.
b) why do you need eight connections? -
OWB 11g on Linux 64-bit security problem
Hello guys,
Our database (11.1.0.7.0) is under Linux 64-bit. Is there any way to start embedded OWB (which is part of the database install) from a different OS user than the owner of the Oracle binaries ?
Due to the VERY slow response time, it is not practical for us to use an OWB standalone Windows version as a client to connect to the repository installed on Linux; so, the only option is to have the OWB client on the same machine as database. But this means to give developers access to the Linux box (using VNC), using the OS user who owns Oracle binaries; this is a very serious security threat, as they, for example, can connect as SYSDBA into db.
When we were using 10g (database + OWB), it was possible to install OWB on the same box as db, but in a different OS user (not in dba group) and to access design repository/control center. For 10g it was released a 64-bit version of OWB. It's not the case with 11g. Also, support told us that it isn't supported to use 32-bit OWB binaries installed on 64-bit Linux.
Any inputs are appreciated.
Regards.I donot know whether i understood your problem correctly or not but.
i donot understant the point
But this means to give developers access to the Linux box (using VNC), using the OS user who owns Oracle binaries; this is a very serious security threat, as they, for example, can connect as SYSDBA into db."Previously, each Oracle Database utilized as a repository for this product required a user with SYSDBA privileges. Beginning in this release, this is no longer required. A schema OWBSYS is created while installing Oracle Database 11g Release 1 (11.1). OWBSYS holds the metadata which is divided into workspaces. To start using Warehouse Builder, you just need to create a new workspace. You do not need SYSDBA privileges"
below is the link
http://oracle.su/owb.111/b31278/whatsnew.htm#CHDIBHGJ -
Linux 920 Database Disk1 Problems
Hi
After spending nearly 3 days downloading 9i for linux I ended up with Disk1 being a corrupted gzip.... Very annoying. Don't know whether this was my problem or not, but now I can't download lnx_920_disk1.cpio.gz again with resume supported. disk2 and disk3 are fine!
Any ideas to a frustrated user without broadband!!!??
Cheers
ChrisThis problem doesn't just occur on Linux. I have encountered the same on both Digital Unix and HP/UX. I finally gave up and told it to just create the scripts. Looking at the scripts, there are a number of different problems depending on the items that you choose to install and/or customizations to db setup, such as size and placing of files.
To find them, I generated the scripts and then looked at the contents and used svrmgrl to individually run commands so that I could see the "real" error message.
It's been awhile but I think the not logged on was a failure in the initial create database command... Or maybe it was the MAX_ENABLED_ROLES being too small in the default init file to support some of the products... Or the rollback segments being created as private and not being automatically added to the init before the assistant does a shutdown and restart... Or it creating the rollback segment tablespace not the size and parameters that I requested...
You may guess by now I wasn't too impressed by the dbassist program. All I can say is doesn't anyone believe in testing anymore? I have a hard time believing that anyone at Oracle actually tested running this product and actually using any of it's features.
This really pissed me off because when I first saw the pretty GUI and nice interface I thought WOW, this is great, finally something to make database creation simpler than running all those commands and scripts. -
OmniPortlet, Linux and graphs a problem?
I have the OmniPortlet working under Linux and made a tab report against emp. Worked fine.
I then set the style to chart instead. Now I cant press OK on the portlet definition page or edit or view the page. I just get "Internal server error".
In the portalTools application log file i get:
at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].util.ThreadP
oolThread.run(ThreadPoolThread.java:64)
10/17/03 2:39 PM omniPortlet: [id=1066394357837ApplicationServerThread, instance
=114401_OMNIPORTLET_387111] JDBCUtils.getMetadata QueryStringAfterParamSubstitut
ion=select * from scott.emp
10/17/03 2:39 PM omniPortlet: [id=(null), instance=(null)] WARNING: Request has
exceeded its warning timeout of 20000ms. Request details are: id=1066394357837Ap
plicationServerThread providerId=387111 portletId=100 portletName=OmniPortlet po
rtletInstance=114401_OMNIPORTLET_387111 user=PORTAL
10/17/03 2:40 PM omniPortlet: [id=(null), instance=(null)] ERROR: Request has ex
ceeded the kill timeout of 80000ms - trying to interrupt the request, request de
tails are: id=1066394357837ApplicationServerThread providerId=387111 portletId=1
00 portletName=OmniPortlet portletInstance=114401_OMNIPORTLET_387111 user=PORTAL
In the portal application log file there are lots of these:
10/17/03 2:34 PM portal: FetchGroup caught uncaughtException=java.lang.ThreadDea
th in thread name=content-fetcher40, starting a new fetcher. 27 total threads in
this group. Parent Groups : applicationServerThreadGroup=76, main=114, system=1
20, end.
10/17/03 2:40 PM portal: id=1066394357837ApplicationServerThread Stall Timeout r
eached. Interrupting Fetcher name=content-fetcher48 label=webPortlet url=http://
ska57.data.skanska.se:7778/portalTools/omniPortlet/providers/omniPortlet time=51
260ms timeout=51000ms process=Dispatching
10/17/03 2:40 PM portal: HeartBeat retrying to stop a Fetcher name=content-fetch
er48 timeout=51000ms process=Dispatching
10/17/03 2:40 PM portal: FetchGroup caught uncaughtException=java.lang.ThreadDea
th in thread name=content-fetcher48, starting a new fetcher. 27 total threads in
this group. Parent Groups : applicationServerThreadGroup=76, main=114, system=1
20, end.
Any ideas?
I believe I hav DISPLAY set up right in the right conf-files (but who nows)...
Kind regards
Tomas Albinsson
Stockholm, SwedenSorry for the delay, I couldn't access the server any sooner.
Which version of OmniPortlet are you using ?Version: 9.0.2.6.1 June 27 2003
In the config page it says that DISPLAY is not configured.
I've set it for OC4J_Portal in $MID_HOME/opmn/conf/opmn.xml. I've also set it in $MID_HOME/portal/902dcm/opmn.xml and in $MID_HOME/portal/9023dcm/opmn.xml.
I ran dcmctl updateConfig and restarted the midtier but it's still "not configured" in the config page.
The application.log also complain about the DISPLAY not being set.
Any suggestions? Are there other files?
My sysadmin has said DISPLAY should be localhost:1.0
The data is just ename and salary from scott.emp but it must be the DISPLAY that's causing my problems.
Tomas -
Radeon X1900 and mac pro graphics problems
Hi all,
i've a mac pro with two xeon cpu's (2,66GHz) in it. 2GB main memory and a radeon X1900 graphics card. on this mac i use bootcamp beta 1.4, installed the newest driver for this version from the apple support side. also i have updated the graphics FW to the newest version. so all things are on up to date.
my problem is the following: if I play some very graphics intensiv games like STALKER or BIOSHOCK (yes i use my mac for works and sometimes to play), it seems that the graphics card will be to hot. I get a lot of pixel errors. horiz. lines and after a while windows xp is freezeing. so I must reboot the maschine. also VPU recovery comes up.
I've tried several settings (800x600/1024x768/until maximum). 2-3 minutes the game is running well. after that my fans spin up like a plane, get the errors on the pixel side and the game crashes or windows xp is freezing.
i don't know any solution yet. can anyone help me? have some others the same problem?
many thanks
AndyHi There,
I was having the exact same problem playing command and conquer 3 in Win XP. I'd play for about 5 minutes or so with the fans spinning at full speed (sounding like the mac was about to 'takeoff'), and then it would just crash.
I followed the advice here, took the graphics card out, clean the dust out and hey presto, the problem was fixed! My MacPro is about 6 months and i was surprised how much dust had got clogged up in there!
 -
Canon LBP6000/Linux/Drivers/CUPS/Installation Problems/Help
I'm working on installing these drivers, http://www.usa.canon.com/cusa/consumer/products/printers_multifunction/laser_printers/imageclass_lbp... the "CAPT Printer Driver for Linux Version 2.60". My distribution is Arch Linux, and my print software is CUPS. I've been at it for a couple of days now, and am pretty familiar with with all the terms, variables, and commands; I think the main problem is that some of my command line settings and other random printer options/preferences are filled in with the wrong choices.
Anyone wanna help me sort this out?Hi Suzanne,
I'm also based in Hong Kong with the exact same printer I bought from Broadway the other day. I had the same problem as you describe when I tried to install it earlier tonight, but now I've got it working.
Once you have the driver installed and the printer connected and turned on, open any printable document, then:
File > Print
Choose "Add Printer..." in the Printer dropdown menu
You will see LBP6000/LBP6018 in the box that appears. Ignore it. Instead, click on "More printers..." in the bottom left corner of the same box.
Another box will appear with a dropdown menu at the top, giving you two choices. Choose "CANON USB (CUPS CAPT)," which will give you the model number again. Click on it, then "Add," and voila!
Hopefully, this will save you the angst you will likely suffer from calling customer support (funny how that has become an oxymoron...) -
ATI Radeon 9600 and PowerMac G4 QuickSilver - problem
Hi guys!
Sorry for the big amount of posts but I have yet another problem.
Yesterday I replaced the stock Nvidia GeForce2 MX in my QuickSilver with an OEM ATI Radeon 9600 128MB from my G5. I taped the pins 3 and 11 and the card worked immediately.
After using the Mac a bit, I noticed that the graphic performances are pretty much exactly the same as before. I installed Leopard and I got the translucent menubar, but the graphic performances are terrible (seems exactly as bad as the GeForce).
Does anyone have the same issue? Here is a screenshot from System Profiler in both Tiger and Leopard:
And here are some Xbench scores (the same card in the G5 scored about 121 points):The DP800 shoild help, especiall the 1 MB L3 per CPU, but the Bus speed is still a bottleneck.
Overall, the Geekbench scores almost doubled, from 372 on the 733, to 670 on the DP800, which was mostly CPU not Graphics improvement, but you should see some.
I only have Xbench results for my QS2001 with upgraded CPUs to 1.47 DP/7455s & an MX2 it seems...
Results
146.05
System Info
Xbench Version
1.1
System Version
10.3.5
Physical RAM
1024 MB
Model
PowerMac3,5
Processor
PowerPC G4x2 @ 1.47 GHz
Version
7455 (Apollo) v3.3
L1 Cache
32K (instruction), 32K (data)
L2 Cache
256K @ 1467 MHz
L3 Cache
2048K @ 4.16 GHz
Bus Frequency
134 MHz
Video Card
GeForce2 TwinView
Drive Type
WDC WD1200BB-00CAA0
CPU Test
163.16
GCD Recursion
182.54
7.13 Mops/sec
Floating Point Basic
183.66
653.17 Mflop/sec
AltiVec Basic
182.95
2.66 Gflop/sec
vecLib FFT
113.59
1.75 Gflop/sec
Floating Point Library
183.42
7.34 Mops/sec
Thread Test
187.53
Computation
177.19
1.43 Mops/sec, 4 threads
Lock Contention
199.15
2.50 Mlocks/sec, 4 threads
Memory Test
116.12
System
159.57
Allocate
857.50
289.11 Kalloc/sec
Fill
124.56
991.53 MB/sec
Copy
104.09
520.46 MB/sec
Stream
91.27
Copy
93.16
379.93 MB/sec [altivec]
Scale
91.50
380.09 MB/sec [altivec]
Add
89.52
377.76 MB/sec [altivec]
Triad
90.99
374.51 MB/sec [altivec]
Quartz Graphics Test
145.34
Line
119.01
3.03 Klines/sec [50% alpha]
Rectangle
123.73
8.70 Krects/sec [50% alpha]
Circle
135.90
3.13 Kcircles/sec [50% alpha]
Bezier
130.84
1.42 Kbeziers/sec [50% alpha]
Text
342.87
5.59 Kchars/sec
OpenGL Graphics Test
153.13
Spinning Squares
153.13
107.16 frames/sec
User Interface Test
233.57
Elements
233.57
79.47 refresh/sec
Disk Test
98.39
Sequential
107.10
Uncached Write
109.10
43.43 MB/sec [4K blocks]
Uncached Write
110.63
43.18 MB/sec [256K blocks]
Uncached Read
96.87
15.33 MB/sec [4K blocks]
Uncached Read
113.40
45.82 MB/sec [256K blocks]
Random
90.99
Uncached Write
79.92
1.14 MB/sec [4K blocks]
Uncached Write
92.08
20.77 MB/sec [256K blocks]
Uncached Read
92.10
0.61 MB/sec [4K blocks]
Uncached Read
102.80
21.16 MB/sec [256K blocks] -
Is Exercise 9 Linux-Compatible? Having problems verifying Derby DB.
I'm setting up the server side of this exercise, and am
having a problem verifying (via verify.cfm) the data source,
however, the data source verifies successfully in the CF admin.
Here's the error that verify.cfm throws:
quote:
Error Executing Database Query.
The conglomerate (96) requested does not exist.
The error occurred in
/var/www/apps/wwwroot/ex9_CF/reservations/verify.cfm: line 1
1 : <cfquery name="testdb" datasource="reservations">
2 : SELECT *
3 : FROM RESERVATIONS
SQLSTATE XSAI2
SQL SELECT * FROM RESERVATIONS WHERE 0=0
VENDORERRORCODE 30000
DATASOURCE reservations
Resources:
* Check the ColdFusion documentation to verify that you are
using the correct syntax.
* Search the Knowledge Base to find a solution to your
problem.
Browser Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.0.3)
Gecko/2008101315 Ubuntu/8.10 (intrepid) Firefox/3.0.3
ColdFire/1.1.51.59
Remote Address 127.0.0.1
Referrer
http://general.localhost/ex9_CF/reservations/
Date/Time 10-Nov-08 04:09 PM
Stack Trace
at
cfverify2ecfm564280480.runPage(/var/www/apps/wwwroot/ex9_CF/reservations/verify.cfm:1)
at
cfverify2ecfm564280480.runPage(/var/www/apps/wwwroot/ex9_CF/reservations/verify.cfm:1)
java.sql.SQLException: The conglomerate (96) requested does
not exist.
at
org.apache.derby.impl.jdbc.SQLExceptionFactory40.getSQLException(Unknown
Source)
at
org.apache.derby.impl.jdbc.Util.generateCsSQLException(Unknown
Source)
at
org.apache.derby.impl.jdbc.TransactionResourceImpl.wrapInSQLException(Unknown
Source)
at
org.apache.derby.impl.jdbc.TransactionResourceImpl.handleException(Unknown
Source)
at
org.apache.derby.impl.jdbc.EmbedConnection.handleException(Unknown
Source)
at
org.apache.derby.impl.jdbc.ConnectionChild.handleException(Unknown
Source)
at org.apache.derby.impl.jdbc.EmbedStatement.execute(Unknown
Source)
at org.apache.derby.impl.jdbc.EmbedStatement.execute(Unknown
Source)
at
coldfusion.server.j2ee.sql.JRunStatement.execute(JRunStatement.java:348)
at
coldfusion.sql.Executive.executeQuery(Executive.java:1220)
at
coldfusion.sql.Executive.executeQuery(Executive.java:1008)
at coldfusion.sql.Executive.executeQuery(Executive.java:939)
at coldfusion.sql.SqlImpl.execute(SqlImpl.java:325)
at
coldfusion.tagext.sql.QueryTag.executeQuery(QueryTag.java:831)
at
coldfusion.tagext.sql.QueryTag.doEndTag(QueryTag.java:521)
at
cfverify2ecfm564280480.runPage(/var/www/apps/wwwroot/ex9_CF/reservations/verify.cfm:1)
at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:196)
at
coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:370)
at
coldfusion.filter.CfincludeFilter.invoke(CfincludeFilter.java:65)
at
coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:279)
at
coldfusion.filter.RequestMonitorFilter.invoke(RequestMonitorFilter.java:48)
at
coldfusion.filter.MonitoringFilter.invoke(MonitoringFilter.java:40)
at coldfusion.filter.PathFilter.invoke(PathFilter.java:86)
at
coldfusion.filter.LicenseFilter.invoke(LicenseFilter.java:27)
at
coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:70)
at
coldfusion.filter.BrowserDebugFilter.invoke(BrowserDebugFilter.java:74)
at
coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8)
at
coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)
at
coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:46)
at
coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)
at
coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
at coldfusion.CfmServlet.service(CfmServlet.java:175)
at
coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89)
at jrun.servlet.FilterChain.doFilter(FilterChain.java:86)
at
coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 )
at
coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46)
at jrun.servlet.FilterChain.doFilter(FilterChain.java:94)
at jrun.servlet.FilterChain.service(FilterChain.java:101)
at
jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106)
at
jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at
jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286)
at
jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
at
jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
at
jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
Caused by: java.sql.SQLException: The conglomerate (96)
requested does not exist.
at
org.apache.derby.impl.jdbc.SQLExceptionFactory.getSQLException(Unknown
Source)
at
org.apache.derby.impl.jdbc.SQLExceptionFactory40.wrapArgsForTransportAcrossDRDA(Unknown
Source)
... 45 moreI re-copied the zip contents to my web root, and now it's
working, for whatever reason. -
Radeon 9600 Pro MAC/PC resolution problem
I am trying to use this card with a 30" Apple display and can only get 1280 x 800 resolution which is horrible as you could imagine. I have also load the most recent ATI drivers. I am running a G5 Dual 2.0 Ghz on Mac OS 10.4.11. Thanks in advance.
I have been having the Exact Same Problem. I have two ViewSonic VA903b Monitors and an ATI Radeon 9600 Pro PC&Mac Edition installed in my G5 PPC. I used to have the standard Nvidia card installed, but replaced it because I wanted a dual monitor setup. It's worked fine with no issues at all since. I recently reinstalled Leopard (up to date) on my mac and now it won't recognize any screen resolution other than 1280x800 which is not what I'm after at all. I have tried downloading the drivers from here:
http://support.amd.com/us/gpudownload/Pages/macosx10-4x-3x-radeon.aspx
This does install the ATI Control Panel, but most, if not all of the options are grayed out and unavailable. I must also note that I am using two DVI>VGA Connectors for my Monitors. This was not a problem before I reinstalled Leopard, so I know that it must be a drivers issue- I hope. When I reinstalled Leopard, the Main Screen was all gray and nearly illegible, but I was able to perform a fresh install of the OS. I am wondering if the mac needs to have the ViewSonic Monitor plugged directly into the Card, as it was originally before upgrading to the ATI card? If this is true, I do not have the old card anymore. Any ideas?
Maybe you are looking for
-
Can you have two phone lines?
I was just wondering if you can have two phone lines going to the same house one for home and one for business? If yes how would they do it? Just connect another line from the telephone graph to the house? Many Thanks Luke
-
I have recently upgraded to windows 7 ultimate on tow of my laptops. The one is an HP 4510s and I have no problem synchronising with my Nokia N97 using PC suite 7.1.40.1. However when I try and synchronise with my other Laptop an Asus F5RL with the
-
Domino ldap and weblogic server 6.1
Hi, I am trying to use domino ldap for authentication in weblogic server 6.1 I configured a custom ldap realm. But the users were not listed from domino ldap and authentication also failed. Can anybody help me? Thanx in advance. - prabha.
-
Installer was unable to access a critical file/directory. Please try installing again. Error code 49. Tried multiple times. get the same error code, which gives no helpful info. "Support" just sends me in a circle, never getting to anything actually
-
Hi. I would like to change to a 64-bit, Windows 7 machine and needs to know if my Adobe Elements 10 will run on 64-bit. Can anybody please confirm?