Ram Problems and Bad SWC's
Abstract
So there are lots of grate swc's tuday... But some of them are done with troubles...
On the other side AS/MXML programmers some times do not know C or do not want to dig into alchemy...
So If SWC function works but after its work some trash byte stays in your RAM... What can you do?
Problem
How to clean up ram which was occupied by function after that function has finished its work?
Example
I'm using some alchemy synchronous jpeg encoder (like here ) to convert some MXML component to Jpeg... It works Fast! it's grate I'm love in it BUT after I use that function 1000 times on 1024x1024 or any other size it fulls up all my RAM!!!(((
Code
private function CJpegWay(e:Event):ByteArray {
var bmpdata:BitmapData = new BitmapData(mySource.width, mySource.height);
bmpdata.draw(mySourceConteiner);
var timer:int = getTimer();
var ba:ByteArray = bmpdata.getPixels(new Rectangle(0,0, mySource.width, mySource.height));
var jpegBA:ByteArray= as3_jpeg_wrapper.write_jpeg_file(ba, mySource.width, mySource.height, Some.value, SomeOther.value); /* If We'll comment "= as3_jpeg_wrapper.write_jpeg_file(ba, mySource.width, mySource.height, Some.value, SomeOther.value)" no ram overflow will happen */
it.text = (" !!! C JPEG ENCODING: !!! "+(getTimer()-timer)+"ms.").toString() + " " + " jpegBA.length=" + jpegBA.length.toString();
return jpegBA;
Error
Error: Error #1000: The system is out of memory.
at flash.display::BitmapData/getPixels()
at HtmlTester/CJpegWay()[C:\Users\Avesta-V\Adobe Flash Builder Beta\COAirBrV2\src\HtmlTester.mxml:92]
at HtmlTester/timerHandlerJpeg()[C:\Users\Avesta-V\Adobe Flash Builder Beta\COAirBrV2\src\HtmlTester.mxml:147]
at flash.utils::Timer/_timerDispatch() at flash.utils::Timer/tick()
or Your RAM will be just Full or trash...
So Can Any One HELP ME and HELP ALL OF US... PLEASE...
I'm working on an AIR application which take snapshots every minutes, and I've got the exact same problem (with both as3_jpeg_wrapper.swc and jpegencoder.swc).
I'm using the Vector optimized asynchronous encoder by Ian McLean, but a working swc built with Alchemy without the memory leak issue would really be better.
Any help would be greatly appreciated
Similar Messages
-
KT4 Ultra RAM problems and others
Hi,
just bought KT4 Ultra, with 512MB DDR-RAM 266/2100 CL 2,5 and Athlon XP 2100+, BIOS V1.2.
During boot-up the computer tells me, that I've got 1024 MB RAM although I only have 512MB. Linux says the same and RAM Test Software does too !! I can't install RedHat nor Windows XP, they always crash, prbably due to RAM problem.
I've already tried out all 3 memory slots.
Any suggestion what to do ?
Why does the computer not recognize any device on the 3rd IDE port ( neither IBM Deskstar w/ 40GB, LS 120 Drive, CD-ROM Drive). My BIOS doesn't show ANY options for the 3rd IDE port!
TIA
SnowstormQuote
Originally posted by maesus
The 3rd IDE port is controlled by the RAID controller. You have to enable onboard RAID, and it only supports HDD, not optical drives.
Is that in the BIOS under: Serial Ata - enabled ? ( I did that !)
Try http://www.memtest86.com
Already did, it always crashes.
Have you tried another RAM?
'Have no other RAM available right now.
And I can't start my computer anymore, since the cpu fan wont work. I plugged the cpu fan into the manboard-fan plug but then the mainboard won't be cooled. That can't work all too long, can it ?
CU
snowstorm -
CS3 Licensing Agreement problem and Bad support
I purchased the CS3 Web Premium and have used to create web pages for my business. This product has stopped working 4 times! "Licensing has stopped working". #1 The first call to the support was bad, after being directed to the adobe website and given minimal instructions, the person hung up. I eventually unistalled and reinstalled it. #2 same error 2 months later, same bad support, spent over an hour on the phone without resolution. Did the install again. #3 the person was helpful and we worked through the adobe site, downloaded a fix. #4 which was 2 days later and right now CS3 is down again. I have spoken to Rose, she tried to help and emailed me info, hung-up. Sean gave me the same info and when I told him that I did it already. He hung up on me. The next person kept asking someone behind her what to do next, she passed me to a supervisor and he emailed me information. I followed that and it STILL DOES NOT WORK. I called back again and spoke to another helper, she was surprised that it did not work yet, gave me the website and hung up on me. "Licensing has stopped working" My online business needs updating and this software does not work! I have asked this to be bumped up to a manager. 3 times they said I would get a call back. Nothing yet. Is there any help out there. I plan on posting this information on every blog and website until this is fixed!!!
Welcome to Discussions Jerry - your first problem should be helped by resetting the SMU. Shut down, unplug everything from the computer, remove the power cord. Wait 15 seconds, replace the power cord, then start the computer.
Your second problem could well be faulty RAM, since most memory is sold with a lifetime guarantee, I suggest you return it to the vendor and get a new stick. You can also run Rember, let it loop dozens of times unless it immediately reports a fault, and see what it says. -
SB Live! 5.1 Digital causing problems and bad performance , maybe wrong drive
Hi everyone,?my Soundcard is aprinted on the bill ---> ? Creative (B) SB Li've Player 5.printed on the card --->Creative?Labs SoundBlaster Li've! 5. Digital? with Emu0K-JFF chip? and Modelnumber? SB0220which I own since 2003 and my System iswinXP Media Center Edition?, msi KT4Ultra Mainboard and an athlonXP2000+ , GB ddr ram and a Radeon9800Pro with usb keyboard & mouse?I've searched this forum and those threads above the thread-list but it didn't help me out. I am concerning about the recent performance of my pc , especially when it comes to sounds in games. At?"Counterstrike .5" my pc hangs for about half a second or less if I use those "radio commands" like Go-Go-Go or Need-Backup, sometimes if other players use them. Sometimes it does those stupid things like?described below.At "Mercedes Benz World Racing" I recognized that if I hit a Sign or sth else that won't move, it plays a loud sound, as everyone can expect if u hit those things. From that on i can't control my car anymore, well, in fact I am able to, but the controls I?do with my keyboard are ... i would say "buffered" and "doubled" ---- Hit the sign -> immediately
or after that press back to reverse -> car dri'ves about 00-200 meters back, other controls I?do are added after that with delay of each about 2-3 seconds and can't be stopped. I turned down the volume of those sounds and it worked a while, but I am not allowed to increase volume of my pc, else it will go like that again. It results in minimal to zero global sound at this game... My Windows is about 4 months old and I cant find drivers for my soundcard. I've installed the drivers from my creative-cd that came together with my soundblaster. I have downloaded a few driver packages from the creative homepage in earlier times but it is always a try-and-cry to get the proper drivers installed. And?I cant remember which?I had installed?years before. That's my current?c:\windows\system32\drivers\ctaud2k.sys (5.2.0.0252-.3.020, 87,92 KB (837.548 Bytes), 27.09.2007 02:3)?I am not sure which driver?I have installed, but I don't want to?do testing anymore, aswell as searching the creative website like I did several times before, sorry, but it does make me really really really mad and angry.One driver doesn't provide the real bass and the other let's my cthelper use 99% usage, all others are not compatible to my card. Those problems occured the first time for about year or later. At the moment there are no IRQ-conflicts. Please tell me whats wrong here or help me find the right driver.
/Edit: I have to add that I am not using the digital port,?because?I do not own digital speakers, it is just?the X-230?2. system from logitech?Message Edited by BleiBill on 0-2-20070:59 PM
Message Edited by BleiBill on 0-2-2007:2 PMI have been having the same trouble since I upgraded to XP about three years ago.
Now I have a new system and like you said I want to dedicate this older mechine to being a media pc and started looking into things again.
I wanted to update drivers and see that I missed an update in July of 03 or I could use a new patch but my drivers are from march of 03 and I can't find the other update.
Come on SB where is the support we pay a premium to get. -
Static lines problem and bad response from Apple employee
I first saw the static lines in my iphone5's keyboard and then again while opening a folder. It was only after 3 days from my purchase. The very next day I went to the Apple store of Shibuya (JAPAN) with my Japanese friend and talked the problem with Apple's employee but the response was really cold(rude, not like that of Apple store employee) Without listening to the whole thing he asked us to consult with Apple's technician in 2nd floor if we have any hardware issues and then leaved us without a single more word. It felt like an insult and then we returned back home with some bad images of Apple's employee in our mind. That was not our first visit there but definitely was first to get such a rude response.
Today once again I saw the same problem in my iPhone5. I am not sure if they will take my problem seriously or not if I visit there again. There in Silicon valley, Tim cook talks about the best customer experience in Apple store, but here in Japan we had a worst customer experience.
Tim, better provide normal customer service first than only talking about best customer experience.ok... just an FYI, this is a user to user forum... therefore no one from Apple will ever see your complaint. You can file your complaint at www.apple.com/feedback. In the situation with your phone, you can also contact your carrier and see if they will swap the device for you. In the USA I have Sprint, and had a similar issue when the 4S was released. Apple claimed they had no fix for it. Then I went to Sprint, and they swapped the phone for me and the issue was resolved. I haven't read anything about this issue with the 5 though.
-
AOL problems and crashes during games
Folks:
Most every time I download software updates, I cannot access AOL. It happened again yesterday. I tried trashing the preferences, but that hasn't worked.
Also, certain games we play crash suddenly and for no reason. We don't have this problem with other programs, just games. We're able to relaunch the game and play again, for the most part. Could that be a RAM problem and if so, why since we have a gig of RAM and these games don't call for that much?
Thanks for any and all help.Hi Again Theresa!
I also had some updates, that needed to be installed on my MacBook, so I installed them this afternoon, to see if I could replicate your experience.
Sure enough, AOL hung on Initializing!
So after quitting, and force quitting AOL, I moved the files and folders listed below, to the Trash.
I then restarted the MacBook, ran Repair Permissions for good measure, and loaded AOL.
It took longer than usual, but it did finish starting!
In HD > Users > Home Account > Library > Preferences:
AOL a folder
com.aol.aol.plist a file
In HD > Users > Shared > America Online:
Access Numbers a file
Art Database a file
Bart Cache a folder
Buddy Icon Cache a folder
Disconnect Log a file
Your Feedbag a file
Session Diagnostics a file
If this procedure works for you, don't forget to reset the AOL Preferences.
Repost if you're not successful.
ali b -
845GE Max L and Kingston RAM problems
I'm building a system using an MSI 845GE Max L mobo, P4 2.4 and a 512MB stick of Kingston PC2700 DDR ValueRAM. When I turned the computer on the first time, it started, then immediately turned off, and then came on again. When I tried to install WinXP, it always stopped at some point with a BSOD complaining about problems with the NTFS Master File Table. Yet the hard drive and NTFS setup checked out OK and did all hardware, connections, etc. I switched to another power supply and removed/disconnected everything except the bare essentials. Still the same problems. Finally, the system started freezing after turning off and then back on. I couldn't even get into the CMOS.
When I pulled out the RAM stick and substituted a 512MB stick of Kingston PC2100, everything proceeded perfectly. Does anybody know of any problems the 845GE Max has had with Kingston PC2700 ValueRAM? I guess it could be sick RAM, but I somehow recall hearing past complaints about Kingston ValueRAM and some MSI boards.
Thanks for any help!
LarcThanks for the suggestion, but that unfortunately doesn't work. When I put the culprit RAM module in and upped DDR voltage to 2.6, boot failed. MemTest wouldn't start and I had no video.
When I ran MemTest with the bad RAM in place last night, I stupidly allowed the system to boot into XP after the test finished. WinXP was trashed! The system wouldn't boot into Win even after I put in good RAM. Thank goodness it was a new installation and nothing had been installed except XP.
It looks as if I not only got a bad stick of RAM, but a vicious one at that!
Thanks again for your help.
Larc -
Okay, for a novice (iphone for dummies) what steps to take and in what order to identify specific problem and resolve issue of dropped calls and/or bad connections. I have a 3g iphone4, I think. Where is best place to find that information so I can verify.
You can call your wireless provider and talk to them about it.
You can restart your iphone, reset, your iphone and restore your iphone. -
Does RAM go 'old' and 'bad'?
Dear Apple Support Community,
First off before I say anything, here are my system specs.
Macbook Pro
15-inch, Mid 2010
Processor: 2.66GHz Intel Core i7
Memory: 4 GB 1067 MHz DDR3
Graphics: Intel HD Graphics 288 MB
Software: OSX 10.8.5 (12F4S)
I wanted to find out whether or not RAM goes 'old'
I've had this computer for over 4 years, and since recently my computer has encountered several random freezes and constant rainbow spinning beach balls.
Since this computer has been running well over the last 4 years, I was wondering if the RAM is the problem.
If I were to replace my two 2GB RAM sticks and replace them with two different 2GB RAM sticks, will my computer perform like new?
I know the RAM will stay at 4GB, but if the RAM is the problem, why would I need to get 8GB of RAM, when I can stick to 4GB?
I don't really understand... Please help me :/Dear Clinton,
Guess what?
Yes, the freezing and SBOD has come back once more.
Although it's only been a few 'days,' I started getting frequent freezes, and I can't even click on anything due to its extreme lag. I thought that the Adobe AE was going to fix the problem...
Anyways, I have almost deleted every single application not needed from my desktop, and I think I have around 490GB free and an external USB drive with over 500GB free on my computer.
I seriously do not know what the problem is, whether its the softwares or the hard drive or whatever...
Please help me out on what to do!!!
Note: The last thing I want to have to do is buy some RAM, and I've researched with my friend's computer, and found out that my mac can only handle 8GB of RAM max. If there is no other solution other than buying RAM or restoring to factory settings, I might as well listen. But I would like some other solutions.
Sincerely,
n_v14404 -
Bad LUN and bad target number startup problem
Hello
Since few time, when my laptop boots I have some strange lines just after uevent :
bad LUN
bad target number (1:0)
bad target number (7:0)
They are in the everything.log and dmesg. Here you have the relevant part of the dmesg output, lspci and lsusb (it seems to be related with some SCSI removable disk...):
[ 16.185536] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 16.369346] scsi 6:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
[ 16.369521] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 16.369638] scsi 6:0:0:1: Direct-Access Generic- MemoryStick 1.00 PQ: 0 ANSI: 0 CCS
[ 16.369648] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 16.369757] sd 6:0:0:1: Attached scsi generic sg3 type 0
[ 16.369825] Bad LUN (0:2)
[ 16.369873] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[ 16.392657] Bad target number (1:0)
[ 16.405941] Bad target number (2:0)
[ 16.419294] Bad target number (3:0)
[ 16.469295] Bad target number (4:0)
[ 16.522611] Bad target number (5:0)
[ 16.575913] Bad target number (6:0)
[ 16.629228] Bad target number (7:0)
lspci :
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation 2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB Controller: Intel Corporation 6 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 6 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 1 (rev b4)
00:1c.1 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 2 (rev b4)
00:1c.2 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 3 (rev b4)
00:1c.3 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 4 (rev b4)
00:1d.0 USB Controller: Intel Corporation 6 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 6 Series Chipset Family 6 port SATA AHCI Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 6 Series Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: ATI Technologies Inc NI Seymour [AMD Radeon HD 6470M] (rev ff)
02:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5209 (rev 01)
04:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 0c45:64b5 Microdia
Bus 002 Device 003: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 002 Device 004: ID 0b38:0010 Gear Head 107-Key Keyboard
I can boot, but something seems to be broken or at least not very clean (and it seems that my boot is a bit longer). Is there a way to reset/reconfigure target numbers ? (no idea of what is that... I googled without success).
All my usb seem to work with keyboard, mouse and usb key... as the SD card reader. I also have something called HG duo (sony vaio laptop) but I don't have this kind of card so I can't test it.
The problem occured with the kernel26_mainline (3.0), but also with 2.6.39 and now with linux3.0 in core...
Does anybody has an idea on what's going on ? (and how to fix it...)
Merci!!The best I can suggest is to try with just one of them connected, and see if the errors persist.
My laptop only has few weeks.... If it is possible to not destroy it.... (I'm not very comfortable with the hardware part, and I think that I will lost the warranty if I open this part).
But I found an option in the bios to disable the memory card reader (both I guess... or maybe there are 2 slots but only one thing to plug), and the bad target number message disappear.
With memory cards disabled :
fdisk -l
Périphérique Amorce Début Fin Blocs Id Système
/dev/sda1 2048 25927679 12962816 27 TFS WinRE masquée
/dev/sda2 * 25927680 26132479 102400 7 HPFS/NTFS/exFAT
/dev/sda3 26132480 226701359 100284440 7 HPFS/NTFS/exFAT
/dev/sda4 226705406 976771071 375032833 5 Étendue
/dev/sda5 960688128 976771071 8041472 82 partition d'échange Linux / Solaris
/dev/sda6 960163840 960686079 261120 83 Linux
/dev/sda7 226705408 929204223 351249408 83 Linux
/dev/sda8 929206272 960161791 15477760 83 Linux
cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: TOSHIBA MK5061GS Rev: MC00
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi4 Channel: 00 Id: 00 Lun: 00
Vendor: Optiarc Model: DVD RW AD-7930V Rev: 1.70
Type: CD-ROM ANSI SCSI revision: 05
With memory card enabled (but I don't have any sd card right now to give you the output with one plugged) :
fdisk -l
Périphérique Amorce Début Fin Blocs Id Système
/dev/sda1 2048 25927679 12962816 27 TFS WinRE masquée
/dev/sda2 * 25927680 26132479 102400 7 HPFS/NTFS/exFAT
/dev/sda3 26132480 226701359 100284440 7 HPFS/NTFS/exFAT
/dev/sda4 226705406 976771071 375032833 5 Étendue
/dev/sda5 960688128 976771071 8041472 82 partition d'échange Linux / Solaris
/dev/sda6 960163840 960686079 261120 83 Linux
/dev/sda7 226705408 929204223 351249408 83 Linux
/dev/sda8 929206272 960161791 15477760 83 Linux
cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: TOSHIBA MK5061GS Rev: MC00
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi4 Channel: 00 Id: 00 Lun: 00
Vendor: Optiarc Model: DVD RW AD-7930V Rev: 1.70
Type: CD-ROM ANSI SCSI revision: 05
Host: scsi6 Channel: 00 Id: 00 Lun: 00
Vendor: Generic- Model: SD/MMC Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi6 Channel: 00 Id: 00 Lun: 01
Vendor: Generic- Model: MemoryStick Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 02
Any idea ? I will try to boot on windows to see if there is any problem...
[edit]: no problem with windows : no strange messages, no strange icon in device manager.. It may be a software problem and not a hardware one ?
Last edited by olsman037 (2011-08-12 08:00:04) -
my 3gs has no service after updating from ios 5 tried resetting network settings, resetting all settings and restoring from back up on itunes.
telus cant find any network problems and apple is difficult to deal with.please help 3 weeks with no phone and $70 a month not happy.I have been having a similar problem for the last few days.Without warning the signal will just completely duck out leaving the device searching for several minutes before settling on a no signal message.
Sometimes restarting the device, toggling data and 3g settings or toggling Airplane Mode will set things right. However, a lot of the time I've been left without a working phone.
I don't believe this is a SIM issue, as I had to change my SIM only one month ago for another signal related problem. Again any help would be appreciated here as well. -
Photoshop has encountered a problem and needs to close
I have had the cs4 software about three weeks, Everything has been running perfectly un til this morning. I was attempting to past an image to a vanishing point and got the hourglass/ spinning circle that is was working, then an error message about memory and photoshop needs to close. I closed all other programs and rebooted to attempt to correct whatever issue it had. Now whenever i try to use the program it lags badly with the simplest of tools(quick select) and then i get the photoshop has encountered a problem and needs to close. I am running windows 7, 3GB ram 2.75 usable, anthalon amd 2 dual core m300 2ghz 64 bit,
AMD M880G with ATI Mobility Radeon HD 4200
Can someone please help me figure out how to fix this.Fault bucket 19706014, type 4
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: Photoshop.exe
P2: 11.0.2.0
P3: 4bf2d91c
P4: VanishingPoint.8BF
P5: 11.0.0.0
P6: 48d395f1
P7: c0000005
P8: 000000000004a430
P9:
P10:
Attached files:
C:\Users\Johnny\AppData\Local\Temp\WERB71F.tmp.WERInternalMetadata.xml
C:\Users\Johnny\AppData\Local\Temp\WERFBFC.tmp.appcompat.txt
C:\Users\Johnny\AppData\Local\Temp\WER9A4.tmp.mdmp
These files may be available here:
C:\Users\Johnny\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_Photoshop.exe_e 4881f26a567c586252e8667502237add319ee67_0ccd2665
Analysis symbol:
Rechecking for solution: 0
Report Id: c3830bd2-e129-11df-a41a-000272ab905c
Report Status: 9 -
I have some problems with putting in the 2nd RAM stick.
I m running on a
P4 2,4 GHz
1x 256MB DDR333 RAM pc2700 (from nanya or whatever)
BIOS 1.2 AMI
When i put the 2nd RAM stick in, (also 1x256 MB DDR 333 RAM pc2700 but from Twinmos) it boots up but shuts down in 3 seconds, and sometimes it just boots up but the screen stays undetected.
I have tried a Dane-Elec (256 MB DDR 333 RAM pc2700) and the problem kept occuring.
I have tried several slot combinations and the Twinmos ram stick doesnt work ny itself (?...so didnt the Dane Elec stick)
What could be my problem?
Thanks in advance for the help,
RonIf you have a module that won't work by itself, I would (suspect) a bad module. May not be seated all the way?
Another thing with this board.....Slot one supports two banks and slots two and three share two banks. -
Kernal panic ?RAM problem
I'm having problems with continual kernel panics and think it may be a RAM problem.A couple of months ago I removed the ram (2*2 and 2*4) and reseated them. After that I had no problems until now.This is the latest report, any thoughts
Sun Nov 18 13:29:04 2012
panic(cpu 6 caller 0xffffff800beb7bd5): Kernel trap at 0xffffff800be2534f, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffdf8026280ff4, CR3: 0x000000000e73f000, CR4: 0x00000000000606e0
RAX: 0x0000000000000012, RBX: 0x0000000000000001, RCX: 0x7fffffffffffffff, RDX: 0x0000000000004000
RSP: 0xffffff8164823de0, RBP: 0xffffff8164823df0, RSI: 0x0000000000000001, RDI: 0xffffdf8026280fe0
R8: 0x0000000000000006, R9: 0x7fffffffffffff00, R10: 0xffffff800c4bdc26, R11: 0x0000000000000201
R12: 0xffffff816483d000, R13: 0xffffff8027732700, R14: 0xffffdf8026280fe0, R15: 0xffffff800c4017d4
RFL: 0x0000000000010002, RIP: 0xffffff800be2534f, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffdf8026280ff4, Error code: 0x0000000000000000, Fault CPU: 0x6
Backtrace (CPU 6), Frame : Return Address
0xffffff8164823a80 : 0xffffff800be1d626
0xffffff8164823af0 : 0xffffff800beb7bd5
0xffffff8164823cc0 : 0xffffff800bece4ed
0xffffff8164823ce0 : 0xffffff800be2534f
0xffffff8164823df0 : 0xffffff800be31910
0xffffff8164823e20 : 0xffffff800be2e4fc
0xffffff8164823ea0 : 0xffffff800be2da0c
0xffffff8164823ee0 : 0xffffff800be1310b
0xffffff8164823f00 : 0xffffff800be1970b
0xffffff8164823f70 : 0xffffff800bea5b16
0xffffff8164823fb0 : 0xffffff800beced53
BSD process name corresponding to current thread: kernel_task
Mac OS version:
12C60
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel slide: 0x000000000bc00000
Kernel text base: 0xffffff800be00000
System model name: iMac12,2 (Mac-942B59F58194171B)
System uptime in nanoseconds: 772350938523
last loaded kext at 59808532473: com.apple.driver.AppleHWSensor 1.9.5d0 (addr 0xffffff7f8d82e000, size 36864)
last unloaded kext at 389003123278: com.apple.driver.AppleUSBUHCI 5.2.5 (addr 0xffffff7f8c717000, size 65536)
loaded kexts:
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AppleBluetoothMultitouch 75.15
com.apple.iokit.IOBluetoothSerialManager 4.0.9f33
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AGPM 100.12.69
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleHDA 2.3.1f2
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.kext.AMDFramebuffer 8.0.0
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.AMDRadeonAccelerator 1.0.0
com.apple.driver.AppleIntelHD3000Graphics 8.0.0
com.apple.driver.AppleMikeyDriver 2.3.1f2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.driver.AppleBacklight 170.2.3
com.apple.driver.ApplePolicyControl 3.2.11
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleIntelSNBGraphicsFB 8.0.0
com.apple.driver.AppleSMCLMU 2.0.2d0
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleUSBCardReader 3.1.0
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.driver.AppleIRController 320.15
com.apple.driver.Oxford_Semi 3.1.0
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.2
com.apple.driver.AppleUSBHub 5.2.5
com.apple.iokit.AppleBCM5701Ethernet 3.2.5b3
com.apple.driver.AirPort.Atheros40 600.70.23
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.driver.AppleAHCIPort 2.4.1
com.apple.driver.AppleUSBEHCI 5.4.0
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.driver.IOBluetoothHIDDriver 4.0.9f33
com.apple.driver.AppleMultitouchDriver 235.28
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.3.1f2
com.apple.iokit.IOAudioFamily 1.8.9fc10
com.apple.kext.OSvKernDSPLib 1.6
com.apple.iokit.IOSurface 86.0.3
com.apple.iokit.IOBluetoothFamily 4.0.9f33
com.apple.iokit.IOAcceleratorFamily 19.0.26
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleGraphicsControl 3.2.11
com.apple.iokit.IONDRVSupport 2.3.5
com.apple.kext.AMD6000Controller 8.0.0
com.apple.kext.AMDSupport 8.0.0
com.apple.driver.AppleHDAController 2.3.1f2
com.apple.iokit.IOHDAFamily 2.3.1f2
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.iokit.IOGraphicsFamily 2.3.5
com.apple.driver.AppleSMC 3.1.4d2
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.2.0d16
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleThunderboltEDMSink 1.1.8
com.apple.driver.AppleThunderboltEDMSource 1.1.8
com.apple.driver.AppleUSBHIDKeyboard 165.5
com.apple.driver.AppleHIDKeyboard 165.5
com.apple.driver.AppleThunderboltDPOutAdapter 1.8.5
com.apple.driver.AppleThunderboltDPInAdapter 1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOUSBMassStorageClass 3.5.0
com.apple.iokit.IOAHCISerialATAPI 2.5.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.1
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.iokit.IOFireWireSerialBusProtocolTransport 2.1.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.iokit.IOFireWireSBP2 4.2.0
com.apple.driver.AppleUSBMergeNub 5.2.5
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.iokit.IOUSBUserClient 5.2.5
com.apple.driver.AppleThunderboltNHI 1.6.0
com.apple.iokit.IOThunderboltFamily 2.1.1
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOAHCIFamily 2.2.1
com.apple.iokit.IOUSBFamily 5.4.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7.2
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0Could be anything from a loose or unseated module, a bad module, out of spec third party modules or other Hardware problem.
1. Reinstall the 2 factory RAM modules in the top slots and be sure to push real hard on each module with both thumbs to ensure that they are fully seated.
as per > iMac: How to remove or install memory
2. Run the Extended Apple Hardware Test,
as per > Intel-based Macs: Using Apple Hardware Test
3. If the Hardware test comes up clean, recheck the spec's of the third party 4GB modules and only if they are correct, reinstall them in the bottom slots again (pushing real hard) as described above.
4. Re-run the Extended Apple Hardware Test. -
Early IMac 2006 RAM Problem?
Hello,
Wondering about this RAM problem I have for an older IMac. Checked the serial number and it states its the Early 2006 IMac. I am trying to install 4 GB of RAM and it seems not booting on both sticks but will boot on one. Does anyone have any idea or any thoughts?
Chris
Message was edited by: clanger1clanger1 wrote:
... Early 2006 IMac ... I am trying to install 4 GB of RAM ...
Bad idea! Early-2006 and Mid-2006 iMacs have a maximum of 2 x 1GB.
+"The maximum amount of RAM you can install in the iMac (Early 2006),+
+iMac (Mid 2006) and iMac (17-inch Late 2006 CD) is *2 GB total*+
+(a 1 GB SO-DIMM in each of the two slots). The maximum amount of+
+RAM you can install in the iMac (Late 2006) models other than the+
+one mentioned above is 4 GB total (a 2 GB SO-DIMM in each of the+
+two slots) but the computer will only use a maximum of 3 GB of RAM."+
http://docs.info.apple.com/article.html?artnum=303084
Looby
Maybe you are looking for
-
Can't Upgrade from AIR 2.0.2 to 2.0.3 on Vista SP2
I received notification that my AIR needed to be updated. Each time the installer starts but just hangs in an endless loop. The .log shows that the installer "gets lost" looking for .MSI packages in non-existent folders. I've tried installing from th
-
Web template report error in portal
Hi, I got this error message when trying to open reports from portal in production. How can I resolve this issue. General exception in deploy transformation for object "WEB_TEMPLATE" I don't get the same error in Quality and Development environments.
-
I have a GuiPanel which I add to a JScrollPane policy. If I have the following (where p is my GuiPanel): add(new JScrollPane(p)) The vertical scroll bar never appears. If I have: add(new JScrollPane(p,JScrollPane.VERTICAL_SCROLLBAR_AS_NEEDED,JScrollP
-
Authorizations-Security based on BP relationships
Dear Experts, In a generic sense We could control which BP could be maintained using Authorization Groups (Obj:B_BUPA_GRP), which is not sufficient for us. We have a situation,Users should be able to view and modify those BPs who are in some relation
-
I recently found out that crawler suddenly stopped working. so I went ahead and restarted subscriber, syndicator and the content server and found out the database password has expired so I reset the password and updated the connection string accordin