Random Query with Access

I am using MS Access and since upgrading to MX6.1 "Order BY
Rnd(RecordID)" no longer works in the query. I have searched and
tried everything I have found with no success. I realize this is a
an issue with the new drivers that area assigned through the CF
Admin interface. I have tried the jodbc technique instead of using
the default MS Access with Unicode, but my websites fail whenever I
do so I have to switch back.
I have tried the various coding solutions and the tags.
Nothing works. It used to be so simple. Why someone at
Macromedia/Adobe will not put out a simple patch to fix this I do
not know. They even know it's an issue. Can anyone tell me what to
do. This is very frustrating. Moving to another database platform
is not a solution either.
I need to simply output 3 to 5 random records from a query
and what used to be very easy has been a thorn in my side for over
a year now. Crazy....
Thanks in advance to anyone who can help....
David G. Moore, Jr.
UpstateWeb LLC

Dan,
I did as you suggested and reported the bug again, but have
not heard back. Interestingly enough, when you go to report a bug
using the link you suggested, there is no place to tell them the
issue is with ColdFusion. They require you select a product and it
is not even listed. I used GoLive to report the bug becuase there
wasn't anything else. I haven't heard anything so I wonder if that
messed things up. Do you know of another way to contact them about
this issue or do you know someone to send an email to. You seem to
know more than most and have an inside track.
I always appreciate your feedback and regard your advice very
highly as you are constantly ingaged in these forums. If you could
provide me with some more direction I would appreciate it. I just
don't know why they don't seem to want to fix the issue with the MS
Access datasource drivers. As I have searched on the issue ever
since upgrading from 5.0 to 6.1, I have found a lot of unhappy
people. Is it really that big of a deal. I mean, it is broken. It
does not work. Wouldn't they want to fix it?
Again, I would appreciate your feedback!

Similar Messages

Big query with access

Hi there.
i have a query smth like this:
SELECT tablas, tyrimo_dok_pastas.pcnrs, books.name, tyrimo_dok_pastas.atsnrs
FROM (SELECT 'pirma' AS tablas, *
FROM (tyrimo_dok_pastas LEFT JOIN tyrimo_dok_gauti_email ON (tyrimo_dok_pastas.pcnrs=tyrimo_dok_gauti_email.pcnr) AND (tyrimo_dok_pastas.knnrs=tyrimo_dok_gauti_email.knnr) AND (tyrimo_dok_pastas.atsnrs=tyrimo_dok_gauti_email.atsnr)) LEFT JOIN books ON tyrimo_dok_pastas.knnrs = books.nr
WHERE tyrimo_dok_gauti_email.pcnr is null
union
SELECT 'antra' AS tablas, *
FROM (tyrimo_dok_gauti_email LEFT JOIN tyrimo_dok_pastas ON (tyrimo_dok_pastas.pcnrs=tyrimo_dok_gauti_email.pcnr) AND (tyrimo_dok_pastas.knnrs=tyrimo_dok_gauti_email.knnr) AND (tyrimo_dok_pastas.atsnrs=tyrimo_dok_gauti_email.atsnr)) LEFT JOIN books ON tyrimo_dok_gauti_email.knnr = books.nr
WHERE tyrimo_dok_pastas.pcnrs is null);This query gives me result, if i try to perform it on ms access, but when i try to execute it in java, java gives no result. maybe anyone have any ideas how can i get the result of this query.
Maybe i should make some procedure or view in my access db and fetch all result from it??
Looking for any suggestions how to do this...
also i get error :general error
printStactTrace() -
Error: java.sql.SQLException: General error
java.sql.SQLException: General error
at sun.jdbc.odbc.JdbcOdbc.createSQLException(Unknown Source)
at sun.jdbc.odbc.JdbcOdbc.standardError(Unknown Source)
at sun.jdbc.odbc.JdbcOdbc.SQLExecDirect(Unknown Source)
at sun.jdbc.odbc.JdbcOdbcStatement.execute(Unknown Source)
at Test.main(test.java:24)

This query gives me result, if i try to perform it on
ms access, but when i try to execute it in java, java
gives no result. Your assumption is that it is the same. Your assumption is wrong.
also i get error :general errorThat means there is a syntax error.

SQL Query with MS-Access Database

Hi,
I have linked my oracle database with MS-Access via a DB LINK. i can access the data from MS-ACCESS, but i have a problem that when i specify the column name or define a where clause in my query it gives me the error ORA-00904: invalid identfier ..
This query fetch the data without any problem SELECT * FROM TBLREPORT@M_ACCESS but when i run SELECT EMP_ID FROM TBLREPORT@M_ACCESS it gives me the error i mentioned above. (Column name have No problem or mistake of spelling even CASE)
also when i try to put where clause in the query it gives me same error SELECT * FROM TBLREPORT@M_ACCESS WHERE EMP_ID = '100' (Error)
is there any change in SQL query for ACCESS database ??
any clue
Regards
Rehman

Are column/table names in access case sensitive? Issue
DESC TBLREPORT@M_ACCESS If column EMP_ID actual name shows up in mixed/lower case, enclose it in double quotes and use the exact case. E.g., if column name shows up as Emp_Id, use:
SELECT "Emp_Id" FROM TBLREPORT@M_ACCESSSY.

Linking Access tables, creating a query with using both Access and Oracle

Hello,
I am using 3.0.04.34 version Oracle Developer. I am supposed to create a script/procedure to use both Access tables and oracle tables together. There is an option in developer to copy the access tables into oracle. But it doesn't help me. Because when we updated the access tables
the copied ones are not be updated. How can I created a linked access tables to oracle and create a query with using both access and oracle table together.
I will appreciate if you guys help me. I look forward to hearing from you guys.
Thanks,
Pinar

Pinar,
to be able to query MS Access tables in Oracle you need an additional product, the Oracle Database Gateway for ODBC. It allows you to link any foreign database into an Oracle database using a suitable ODBC driver. You can then access the MS Access tables through a database link based on the Database Gateway for ODBC. This will also allow you to join local Oracle and remote MS Access tables from your Oracle database.
There's a note on My Oracle Support which gives you more details:Document 233876.1 Options for Connecting to Foreign Data Stores and Non-Oracle Databases - For example - DB2, SQL*Server, Sybase, Informix, Teradata, MySQL
And there's also a dedicated Forum: Heterogeneous Connectivity

How to query microsoft access with DDE Request?

Hello,
We are trying to save the results of calibration tests to access database and include a search tool inside the labview to find specific results based on the part number of the tested device. So far we have accomplished writing data into the access database using the examples of labview. My question is that is there any way to send a query to microsoft access and recieve the results inside the labview? For example send a query with a specific criteria on the part number and recieve the results for that part number.
Thanks in advance
Pouya

Why would you be using DDE. That microsoft technology is obsolete and has not been used/supported in quite a few years. Instead, look at the Database Connectivity Toolkit or LabSQL. There are also numerous posts on ADO (the technology behind both). Do a search.

Problem accessing Infosets using Query with SQL

Hi,
I have Lumira desktop version 1.18.0.
Using the Query with SQL connection, I successfully connected to SAP R/3 6. I was able to view the User Groups under CATALOG_VIEW, but it seems I cannot go beyong this point and select an Infoset. When I click on an Infoset I expect the Query pane to be populated with the SQL statement but nothing happens.
I attached a screenshot for clarification
Thanks
Dany

Hi Dany,
A suggestion for you would be to use another client tool & check if the behavior is the same. I suggest that you use Information Design Tool (from BOE 4.1), create a connection to your ERP, then a data foundation on top of that connection and check if the behavior is the same. This way we can isolate if the problem is caused by the client tool or by the backend.
My 2 cents
Antoine

Can not execute a simple update query with ms access

Hi
I am trying to execute a simple update query , this is the code I am running : I get no exeptions but the db is not being updated .
When I copy my query into access it works !
The table / columns are spelled correctly and I am able to execute select queries.
can anyone figure out what is going on
Thanks shahar
public static void main(String[] args) {
MainManager mainManager = MainManager.getInstance();
Log log = Log.getInstance();
try {
log.writeDebugMessage("befor executing query");
//stmt.executeUpdate("update trainee set Trainee_Name = 'shahar&Rafi' where Trainee_Id = 1 ");
//stmt = null ;
PreparedStatement stmt1 = con.prepareStatement("UPDATE Trainee SET Trainee_Name =? WHERE Trainee_Id =?");
String name = new String("Shahar&Rafi");
int Id = 1 ;
stmt1.setString(1,name);
stmt1.setInt(2,Id);
System.out.println(stmt1.toString());
stmt1.execute();
log.writeDebugMessage("After executing query");
catch (SQLException e ){
System.err.println("SQLException: " + e.getMessage());
}

Hi All,
got the problem solved at last.
first, in the SQL string all the values must be within " ' "
for example:
INSERT INTO Trainee(Trainee_Id , Trainee_password , Trainee_Address, Trainee_Name , Trainee_Phone , Trainee_Gender , Trainee_SessionTime , Trainee_Purpose , Trainee_HealthStatus , Trainee_StartDate , Trainee_Birthday) VALUES (6,'333','hhhh','rafi',048231821,true,63,4,true, ('Feb 22, 2002'), ('Feb 22, 2002'))
second and more important,
a 'dummy' sql select query must be performed after an update query
example for code:
try{
DB.MainManager.getInstance().ExecuteUpdateQuery(A);
DB.MainManager.getInstance().getStatement().executeQuery("SELECT * FROM Trainee");
where A is the update query.

How to create an ABAP Query with OR logical expression in the select-where

Hi,
In trying to create an ABAP query with parameters. So it will select data where fields are equal to the parameters entered. The default logical expression is SELECT.. WHERE... AND.. However I want to have an OR logical expression instead of AND.. how can I attain this??
Please help me on this.. Points will be rewarded.
Thanks a lot.
Regards,
Question Man

Hi Bhupal, Shanthi, and Saipriya,
Thanks for your replies. But that didn't answer my question.
Bhupal,
You cannot just replace AND with OR in an ABAP QUERY. ABAP QUERY is a self generated SAP code. You'll just declare the tables, input parameters and output fields to be displayed and it will create a SAP standard code. If you'll try to change the code and replace the AND with OR in the SAP standard code, the system will require you to enter access key/object key for that particular query.
Shanthi,
Yes, that is exactly what need to have. I need to retireve DATA whenever one of the conditions was satisfied.
Saipriya,
Like what I have said, this is a standard SAP code so we can't do your suggestion.
I have already tried to insert a code in the ABAP query (there's a part there wherein you can have extra code) but that didn't work. Can anybody help me on this.
Thanks a lot.
Points will be rewarded.
Regards,
Question Man

SQL query with Bind variable with slower execution plan

I have a 'normal' sql select-insert statement (not using bind variable) and it yields the following execution plan:-
Execution Plan
0 INSERT STATEMENT Optimizer=CHOOSE (Cost=7 Card=1 Bytes=148)
1 0 HASH JOIN (Cost=7 Card=1 Bytes=148)
2 1 TABLE ACCESS (BY INDEX ROWID) OF 'TABLEA' (Cost=4 Card=1 Bytes=100)
3 2 INDEX (RANGE SCAN) OF 'TABLEA_IDX_2' (NON-UNIQUE) (Cost=3 Card=1)
4 1 INDEX (FAST FULL SCAN) OF 'TABLEB_IDX_003' (NON-UNIQUE)
(Cost=2 Card=135 Bytes=6480)
Statistics
0 recursive calls
18 db block gets
15558 consistent gets
47 physical reads
9896 redo size
423 bytes sent via SQL*Net to client
1095 bytes received via SQL*Net from client
3 SQL*Net roundtrips to/from client
1 sorts (memory)
0 sorts (disk)
55 rows processed
I have the same query but instead running using bind variable (I test it with both oracle form and SQL*plus), it takes considerably longer with a different execution plan:-
Execution Plan
0 INSERT STATEMENT Optimizer=CHOOSE (Cost=407 Card=1 Bytes=148)
1 0 TABLE ACCESS (BY INDEX ROWID) OF 'TABLEA' (Cost=3 Card=1 Bytes=100)
2 1 NESTED LOOPS (Cost=407 Card=1 Bytes=148)
3 2 INDEX (FAST FULL SCAN) OF TABLEB_IDX_003' (NON-UNIQUE) (Cost=2 Card=135 Bytes=6480)
4 2 INDEX (RANGE SCAN) OF 'TABLEA_IDX_2' (NON-UNIQUE) (Cost=2 Card=1)
Statistics
0 recursive calls
12 db block gets
3003199 consistent gets
54 physical reads
9448 redo size
423 bytes sent via SQL*Net to client
1258 bytes received via SQL*Net from client
3 SQL*Net roundtrips to/from client
1 sorts (memory)
0 sorts (disk)
55 rows processed
TABLEA has around 3million record while TABLEB has 300 records. Is there anyway I can improve the speed of the sql query with bind variable? I have DBA Access to the database
Regards
Ivan

Many thanks for your reply.
I have run the statistic already for the both tableA and tableB as well all the indexes associated with both table (using dbms_stats, I am on 9i db ) but not the indexed columns.
for table I use:-
begin
dbms_stats.gather_table_stats(ownname=> 'IVAN', tabname=> 'TABLEA', partname=> NULL);
end;
for index I use:-
begin
dbms_stats.gather_index_stats(ownname=> 'IVAN', indname=> 'TABLEB_IDX_003', partname=> NULL);
end;
Is it possible to show me a sample of how to collect statisc for INDEX columns stats?
regards
Ivan

Too Slow - Domino 6.5.4 with access manager agent 2.2 ?

I don't know how to tune Domino 6.5.4 with access manager agent 2.2?
I think AMAgent.properties is not good for SSO.
Please help me to tune it.
# $Id: AMAgent.properties,v 1.103 2005/09/19 22:08:34 madan Exp $
# Copyright ? 2002 Sun Microsystems, Inc. All rights reserved.
# U.S. Government Rights - Commercial software. Government users are
# subject to the Sun Microsystems, Inc. standard license agreement and
# applicable provisions of the FAR and its supplements. Use is subject to
# license terms. Sun, Sun Microsystems, the Sun logo and Sun ONE are
# trademarks or registered trademarks of Sun Microsystems, Inc. in the
# U.S. and other countries.
# Copyright ? 2002 Sun Microsystems, Inc. Tous droits r閟erv閟.
# Droits du gouvernement am閞icain, utlisateurs gouvernmentaux - logiciel
# commercial. Les utilisateurs gouvernmentaux sont soumis au contrat de
# licence standard de Sun Microsystems, Inc., ainsi qu aux dispositions en
# vigueur de la FAR [ (Federal Acquisition Regulations) et des suppl閙ents
# ? celles-ci.
# Distribu? par des licences qui en restreignent l'utilisation. Sun, Sun
# Microsystems, le logo Sun et Sun ONE sont des marques de fabrique ou des
# marques d閜os閑s de Sun Microsystems, Inc. aux Etats-Unis et dans
# d'autres pays.
# The syntax of this file is that of a standard Java properties file,
# see the documentation for the java.util.Properties.load method for a
# complete description. (CAVEAT: The SDK in the parser does not currently
# support any backslash escapes except for wrapping long lines.)
# All property names in this file are case-sensitive.
# NOTE: The value of a property that is specified multiple times is not
# defined.
# WARNING: The contents of this file are classified as an UNSTABLE
# interface by Sun Microsystems, Inc. As such, they are subject to
# significant, incompatible changes in any future release of the
# software.
# The name of the cookie passed between the Access Manager
# and the SDK.
# WARNING: Changing this property without making the corresponding change
# to the Access Manager will disable the SDK.
com.sun.am.cookie.name = iPlanetDirectoryPro
# The URL for the Access Manager Naming service.
com.sun.am.naming.url = http://sportal.yjy.dqyt.petrochina:80/amserver/namingservice
# The URL of the login page on the Access Manager.
com.sun.am.policy.am.login.url = http://sportal.yjy.dqyt.petrochina:80/amserver/UI/Login
# Name of the file to use for logging messages.
com.sun.am.policy.agents.config.local.log.file = c:/Sun/Access_Manager/Agents/2.2/debug/C__Lotus_Domino/amAgent
# This property is used for Log Rotation. The value of the property specifies
# whether the agent deployed on the server supports the feature of not. If set
# to false all log messages are written to the same file.
com.sun.am.policy.agents.config.local.log.rotate = true
# Name of the Access Manager log file to use for logging messages to
# Access Manager.
# Just the name of the file is needed. The directory of the file
# is determined by settings configured on the Access Manager.
com.sun.am.policy.agents.config.remote.log = amAuthLog.Dominoad.yjy.dqyt.petrochina.80
# Set the logging level for the specified logging categories.
# The format of the values is
#     <ModuleName>[:<Level>][,<ModuleName>[:<Level>]]*
# The currently used module names are: AuthService, NamingService,
# PolicyService, SessionService, PolicyEngine, ServiceEngine,
# Notification, PolicyAgent, RemoteLog and all.
# The all module can be used to set the logging level for all currently
# none logging modules. This will also establish the default level for
# all subsequently created modules.
# The meaning of the 'Level' value is described below:
#     0     Disable logging from specified module*
#     1     Log error messages
#     2     Log warning and error messages
#     3     Log info, warning, and error messages
#     4     Log debug, info, warning, and error messages
#     5     Like level 4, but with even more debugging messages
# 128     log url access to log file on AM server.
# 256     log url access to log file on local machine.
# If level is omitted, then the logging module will be created with
# the default logging level, which is the logging level associated with
# the 'all' module.
# for level of 128 and 256, you must also specify a logAccessType.
# *Even if the level is set to zero, some messages may be produced for
# a module if they are logged with the special level value of 'always'.
com.sun.am.log.level =
# The org, username and password for Agent to login to AM.
com.sun.am.policy.am.username = UrlAccessAgent
com.sun.am.policy.am.password = LYnKyOIgdWt404ivWY6HPQ==
# Name of the directory containing the certificate databases for SSL.
com.sun.am.sslcert.dir = c:/Sun/Access_Manager/Agents/2.2/domino/cert
# Set this property if the certificate databases in the directory specified
# by the previous property have a prefix.
com.sun.am.certdb.prefix =
# Should agent trust all server certificates when Access Manager
# is running SSL?
# Possible values are true or false.
com.sun.am.trust_server_certs = true
# Should the policy SDK use the Access Manager notification
# mechanism to maintain the consistency of its internal cache? If the value
# is false, then a polling mechanism is used to maintain cache consistency.
# Possible values are true or false.
com.sun.am.notification.enable = true
# URL to which notification messages should be sent if notification is
# enabled, see previous property.
com.sun.am.notification.url = http://Dominoad.yjy.dqyt.petrochina:80/amagent/UpdateAgentCacheServlet?shortcircuit=false
# This property determines whether URL string case sensitivity is
# obeyed during policy evaluation
com.sun.am.policy.am.url_comparison.case_ignore = true
# This property determines the amount of time (in minutes) an entry
# remains valid after it has been added to the cache. The default
# value for this property is 3 minutes.
com.sun.am.policy.am.polling.interval=3
# This property allows the user to configure the User Id parameter passed
# by the session information from the access manager. The value of User
# Id will be used by the agent to set the value of REMOTE_USER server
# variable. By default this parameter is set to "UserToken"
com.sun.am.policy.am.userid.param=UserToken
# Profile attributes fetch mode
# String attribute mode to specify if additional user profile attributes should
# be introduced into the request. Possible values are:
# NONE - no additional user profile attributes will be introduced.
# HTTP_HEADER - additional user profile attributes will be introduced into
# HTTP header.
# HTTP_COOKIE - additional user profile attributes will be introduced through
# cookies.
# If not within these values, it will be considered as NONE.
com.sun.am.policy.agents.config.profile.attribute.fetch.mode=NONE
# The user profile attributes to be added to the HTTP header. The
# specification is of the format ldap_attribute_name|http_header_name[,...].
# ldap_attribute_name is the attribute in data store to be fetched and
# http_header_name is the name of the header to which the value needs
# to be assigned.
# NOTE: In most cases, in a destination application where a "http_header_name"
# shows up as a request header, it will be prefixed by HTTP_, and all
# lower case letters will become upper case, and any - will become _;
# For example, "common-name" would become "HTTP_COMMON_NAME"
com.sun.am.policy.agents.config.profile.attribute.map=cn|common-name,ou|organizational-unit,o|organization,mail|email,employeenumber|employee-
number,c|country
# Session attributes mode
# String attribute mode to specify if additional user session attributes should
# be introduced into the request. Possible values are:
# NONE - no additional user session attributes will be introduced.
# HTTP_HEADER - additional user session attributes will be introduced into HTTP header.
# HTTP_COOKIE - additional user session attributes will be introduced through cookies.
# If not within these values, it will be considered as NONE.
com.sun.am.policy.agents.config.session.attribute.fetch.mode=NONE
# The session attributes to be added to the HTTP header. The specification is
# of the format session_attribute_name|http_header_name[,...].
# session_attribute_name is the attribute in session to be fetched and
# http_header_name is the name of the header to which the value needs to be
# assigned.
# NOTE: In most cases, in a destination application where a "http_header_name"
# shows up as a request header, it will be prefixed by HTTP_, and all
# lower case letters will become upper case, and any - will become _;
# For example, "common-name" would become "HTTP_COMMON_NAME"
com.sun.am.policy.agents.config.session.attribute.map=
# Response Attribute Fetch Mode
# String attribute mode to specify if additional user response attributes should
# be introduced into the request. Possible values are:
# NONE - no additional user response attributes will be introduced.
# HTTP_HEADER - additional user response attributes will be introduced into
# HTTP header.
# HTTP_COOKIE - additional user response attributes will be introduced through
# cookies.
# If not within these values, it will be considered as NONE.
com.sun.am.policy.agents.config.response.attribute.fetch.mode=NONE
# The response attributes to be added to the HTTP header. The specification is
# of the format response_attribute_name|http_header_name[,...].
# response_attribute_name is the attribute in policy response to be fetched and
# http_header_name is the name of the header to which the value needs to be
# assigned.
# NOTE: In most cases, in a destination application where a "http_header_name"
# shows up as a request header, it will be prefixed by HTTP_, and all
# lower case letters will become upper case, and any - will become _;
# For example, "common-name" would become "HTTP_COMMON_NAME"
com.sun.am.policy.agents.config.response.attribute.map=
# The cookie name used in iAS for sticky load balancing
com.sun.am.policy.am.lb.cookie.name = GX_jst
# indicate where a load balancer is used for Access Manager
# services.
# true | false
com.sun.am.load_balancer.enable = false
####Agent Configuration####
# this is for product versioning, please do not modify it
com.sun.am.policy.agents.config.version=2.2
# Set the url access logging level. the choices are
# LOG_NONE - do not log user access to url
# LOG_DENY - log url access that was denied.
# LOG_ALLOW - log url access that was allowed.
# LOG_BOTH - log url access that was allowed or denied.
com.sun.am.policy.agents.config.audit.accesstype = LOG_DENY
# Agent prefix
com.sun.am.policy.agents.config.agenturi.prefix = http://Dominoad.yjy.dqyt.petrochina:80/amagent
# Locale setting.
com.sun.am.policy.agents.config.locale = en_US
# The unique identifier for this agent instance.
com.sun.am.policy.agents.config.instance.name = unused
# Do SSO only
# Boolean attribute to indicate whether the agent will just enforce user
# authentication (SSO) without enforcing policies (authorization)
com.sun.am.policy.agents.config.do_sso_only = true
# The URL of the access denied page. If no value is specified, then
# the agent will return an HTTP status of 403 (Forbidden).
com.sun.am.policy.agents.config.accessdenied.url =
# This property indicates if FQDN checking is enabled or not.
com.sun.am.policy.agents.config.fqdn.check.enable = true
# Default FQDN is the fully qualified hostname that the users should use
# in order to access resources on this web server instance. This is a
# required configuration value without which the Web server may not
# startup correctly.
# The primary purpose of specifying this property is to ensure that if
# the users try to access protected resources on this web server
# instance without specifying the FQDN in the browser URL, the Agent
# can take corrective action and redirect the user to the URL that
# contains the correct FQDN.
# This property is set during the agent installation and need not be
# modified unless absolutely necessary to accommodate deployment
# requirements.
# WARNING: Invalid value for this property can result in the Web Server
# becoming unusable or the resources becoming inaccessible.
# See also: com.sun.am.policy.agents.config.fqdn.check.enable,
# com.sun.am.policy.agents.config.fqdn.map
com.sun.am.policy.agents.config.fqdn.default = Dominoad.yjy.dqyt.petrochina
# The FQDN Map is a simple map that enables the Agent to take corrective
# action in the case where the users may have typed in an incorrect URL
# such as by specifying partial hostname or using an IP address to
# access protected resources. It redirects the browser to the URL
# with fully qualified domain name so that cookies related to the domain
# are received by the agents.
# The format for this property is:
# com.sun.am.policy.agents.config.fqdn.map = [invalid_hostname|valid_hostname][,...]
# This property can also be used so that the agents use the name specified
# in this map instead of the web server's actual name. This can be
# accomplished by doing the following.
# Say you want your server to be addressed as xyz.hostname.com whereas the
# actual name of the server is abc.hostname.com. The browsers only knows
# xyz.hostname.com and you have specified polices using xyz.hostname.com at
# the Access Manager policy console, in this file set the mapping as
# com.sun.am.policy.agents.fqdn.map = valid|xyz.hostname.com
# Another example is if you have multiple virtual servers say rst.hostname.com,
# uvw.hostname.com and xyz.hostname.com pointing to the same actual server
# abc.hostname.com and each of the virtual servers have their own policies
# defined, then the fqdnMap should be defined as follows:
# com.sun.am.policy.agents.fqdn.map = valid1|rst.hostname.com,valid2|uvw.hostname.com,valid3|xyz.hostname.com
# WARNING: Invalid value for this property can result in the Web Server
# becoming unusable or the resources becoming inaccessible.
com.sun.am.policy.agents.config.fqdn.map =
# Cookie Reset
# This property must be set to true, if this agent needs to
# reset cookies in the response before redirecting to
# Access Manager for Authentication.
# By default this is set to false.
# Example : com.sun.am.policy.agents.config.cookie.reset.enable=true
com.sun.am.policy.agents.config.cookie.reset.enable=false
# This property gives the comma separated list of Cookies, that
# need to be included in the Redirect Response to Access Manager.
# This property is used only if the Cookie Reset feature is enabled.
# The Cookie details need to be specified in the following Format
# name[=value][;Domain=value]
# If "Domain" is not specified, then the default agent domain is
# used to set the Cookie.
# Example : com.sun.am.policy.agents.config.cookie.reset.list=LtpaToken,
# token=value;Domain=subdomain.domain.com
com.sun.am.policy.agents.config.cookie.reset.list=
# This property gives the space separated list of domains in
# which cookies have to be set in a CDSSO scenario. This property
# is used only if CDSSO is enabled.
# If this property is left blank then the fully qualified cookie
# domain for the agent server will be used for setting the cookie
# domain. In such case it is a host cookie instead of a domain cookie.
# Example : com.sun.am.policy.agents.config.cookie.domain.list=.sun.com .iplanet.com
com.sun.am.policy.agents.config.cookie.domain.list=
# user id returned if accessing global allow page and not authenticated
com.sun.am.policy.agents.config.anonymous_user=anonymous
# Enable/Disable REMOTE_USER processing for anonymous users
# true | false
com.sun.am.policy.agents.config.anonymous_user.enable=false
# Not enforced list is the list of URLs for which no authentication is
# required. Wildcards can be used to define a pattern of URLs.
# The URLs specified may not contain any query parameters.
# Each service have their own not enforced list. The service name is suffixed
# after "# com.sun.am.policy.agents.notenforcedList." to specify a list
# for a particular service. SPACE is the separator between the URL.
com.sun.am.policy.agents.config.notenforced_list = http://dominoad.yjy.dqyt.petrochina/*.nsf http://dominoad.yjy.dqyt.petrochina/teamroom.nsf/TROutline.gif?
OpenImageResource http://dominoad.yjy.dqyt.petrochina/icons/*.gif
# Boolean attribute to indicate whether the above list is a not enforced list
# or an enforced list; When the value is true, the list means enforced list,
# or in other words, the whole web site is open/accessible without
# authentication except for those URLs in the list.
com.sun.am.policy.agents.config.notenforced_list.invert = false
# Not enforced client IP address list is a list of client IP addresses.
# No authentication and authorization are required for the requests coming
# from these client IP addresses. The IP address must be in the form of
# eg: 192.168.12.2 1.1.1.1
com.sun.am.policy.agents.config.notenforced_client_ip_list =
# Enable POST data preservation; By default it is set to false
com.sun.am.policy.agents.config.postdata.preserve.enable = false
# POST data preservation : POST cache entry lifetime in minutes,
# After the specified interval, the entry will be dropped
com.sun.am.policy.agents.config.postcache.entry.lifetime = 10
# Cross-Domain Single Sign On URL
# Is CDSSO enabled.
com.sun.am.policy.agents.config.cdsso.enable=false
# This is the URL the user will be redirected to for authentication
# in a CDSSO Scenario.
com.sun.am.policy.agents.config.cdcservlet.url =
# Enable/Disable client IP address validation. This validate
# will check if the subsequent browser requests come from the
# same ip address that the SSO token is initially issued against
com.sun.am.policy.agents.config.client_ip_validation.enable = false
# Below properties are used to define cookie prefix and cookie max age
com.sun.am.policy.agents.config.profile.attribute.cookie.prefix = HTTP_
com.sun.am.policy.agents.config.profile.attribute.cookie.maxage = 300
# Logout URL - application's Logout URL.
# This URL is not enforced by policy.
# if set, agent will intercept this URL and destroy the user's session,
# if any. The application's logout URL will be allowed whether or not
# the session destroy is successful.
com.sun.am.policy.agents.config.logout.url=
#http://sportal.yjy.dqyt.petrochina/amserver/UI/Logout
# Any cookies to be reset upon logout in the same format as cookie_reset_list
com.sun.am.policy.agents.config.logout.cookie.reset.list =
# By default, when a policy decision for a resource is needed,
# agent gets and caches the policy decision of the resource and
# all resource from the root of the resource down, from the Access Manager.
# For example, if the resource is http://host/a/b/c, the the root of the
# resource is http://host/. This is because more resources from the
# same path are likely to be accessed subsequently.
# However this may take a long time the first time if there
# are many many policies defined under the root resource.
# To have agent get and cache the policy decision for the resource only,
# set the following property to false.
com.sun.am.policy.am.fetch_from_root_resource = true
# Whether to get the client's hostname through DNS reverse lookup for use
# in policy evaluation.
# It is true by default, if the property does not exist or if it is
# any value other than false.
com.sun.am.policy.agents.config.get_client_host_name = false
# The following property is to enable native encoding of
# ldap header attributes forwarded by agents. If set to true
# agent will encode the ldap header value in the default
# encoding of OS locale. If set to false ldap header values
# will be encoded in UTF-8
com.sun.am.policy.agents.config.convert_mbyte.enable = false
#When the not enforced list or policy has a wildcard '*' character, agent
#strips the path info from the request URI and uses the resulting request
#URI to check against the not enforced list or policy instead of the entire
#request URI, in order to prevent someone from getting access to any URI by
#simply appending the matching pattern in the policy or not enforced list.
#For example, if the not enforced list has the value http://host/*.gif,
#stripping the path info from the request URI will prevent someone from
#getting access to http://host/index.html by using the URL http://host/index.html?hack.gif.
#However when a web server (for exmample apache) is configured to be a reverse
#proxy server for a J2EE application server, path info is interpreted in a different
#manner since it maps to a resource on the proxy instead of the app server.
#This prevents the not enforced list or policy from being applied to part of
#the URI below the app serverpath if there is a wildcard character. For example,
#if the not enforced list has value http://host/webapp/servcontext/* and the
#request URL is http://host/webapp/servcontext/example.jsp the path info
#is /servcontext/example.jsp and the resulting request URL with path info stripped
#is http://host/webapp, which will not match the not enforced list. By setting the
#following property to true, the path info will not be stripped from the request URL
#even if there is a wild character in the not enforced list or policy.
#Be aware though that if this is set to true there should be nothing following the
#wildcard character '*' in the not enforced list or policy, or the
#security loophole described above may occur.
com.sun.am.policy.agents.config.ignore_path_info = false
# Override the request url given by the web server with
# the protocol, host or port of the agent's uri specified in
# the com.sun.am.policy.agents.agenturiprefix property.
# These may be needed if the agent is sitting behind a ssl off-loader,
# load balancer, or proxy, and either the protocol (HTTP scheme),
# hostname, or port of the machine in front of agent which users go through
# is different from the agent's protocol, host or port.
com.sun.am.policy.agents.config.override_protocol =
com.sun.am.policy.agents.config.override_host =
com.sun.am.policy.agents.config.override_port =
# Override the notification url in the same way as other request urls.
# Set this to true if any one of the override properties above is true,
# and if the notification url is coming through the proxy or load balancer
# in the same way as other request url's.
com.sun.am.policy.agents.config.override_notification.url =
# The following property defines how long to wait in attempting
# to connect to an Access Manager AUTH server.
# The default value is 2 seconds. This value needs to be increased
# when receiving the error "unable to find active Access Manager Auth server"
com.sun.am.policy.agents.config.connection_timeout =
# Time in milliseconds the agent will wait to receive the
# response from Access Manager. After the timeout, the connection
# will be drop.
# A value of 0 means that the agent will wait until receiving the response.
# WARNING: Invalid value for this property can result in
# the resources becoming inaccessible.
com.sun.am.receive_timeout = 0
# The three following properties are for IIS6 agent only.
# The two first properties allow to set a username and password that will be
# used by the authentication filter to pass the Windows challenge when the Basic
# Authentication option is selected in Microsoft IIS 6.0. The authentication
# filter is named amiis6auth.dll and is located in
# Agent_installation_directory/iis6/bin. It must be installed manually on
# the web site ("ISAPI Filters" tab in the properties of the web site).
# It must also be uninstalled manually when unintalling the agent.
# The last property defines the full path for the authentication filter log file.
com.sun.am.policy.agents.config.iis6.basicAuthentication.username =
com.sun.am.policy.agents.config.iis6.basicAuthentication.password =
com.sun.am.policy.agents.config.iis6.basicAuthentication.logFile = c:/Sun/Access_Manager/Agents/2.2/debug/C__Lotus_Domino/amAuthFilter

Hi,
I installed opensso (so Sun Java(TM) System Access Manager 7.5) and the agent for Domino 6.5.4 and I have the message in logs "amAgent"
2007-07-11 18:40:16.119 Error 1708:3dbcf768 PolicyAgent: render_response(): Entered.
I have the box to identify but it doesnot connect me on my opensso server.
It still identify with Domino's server
Thanks for your response
Thomas

Error when opening a BW query with Crystal Reports

Hi all,
I am having problems when opening a BW query with Crystal Reports, the strange thing is that it only happens with
the bo user I have created. If I use a user that already exists and that has SAP_ALL authorization it works.
I don't know if this could be an authorizations issue, but I have created a role with all the authorizations stated in the manual.
The error I am getting is the following:
"An error occurred while generating a new report template. Error in UNKNOWN.RPT file"
Does anyone know what this could be?
Thanks

Well,
I cannot access the system now. But I think it is not an issue of authorization, because I assigned all the good user's role to the bo user,
and even with that, it still don't work.
Thanks

How to find out the query is accessing the DB tables or not

Hi Gurus ,
How to find out the query is accessing the DB tables or not.
Where exactly we will find this information in SAP BW.
I know that this information we can find in ST03. But where exactly we will find the query information along with DB information?

Lakshmi
Activate BI Technical Content for Query analysis and run query against that.
Hope this helps
Thanks
sat

Random Freeze with { UNC } error - hard disk problems?

Hi,
My laptop randomly freezes for a couple of seconds frequently. I am running 2.6.30-ARCH in a dell inspiron. I did a check on the /var/log/errors.log and found the follwing block of errors occuring over and over again as soon as the freeze up happens.
Sep 26 17:16:04 revelation kernel: end_request: I/O error, dev sda, sector 33016839
Sep 26 22:49:54 revelation kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
Sep 26 22:49:54 revelation kernel: ata1.00: BMDMA stat 0x25
Sep 26 22:49:54 revelation kernel: ata1.00: cmd c8/00:08:01:cc:f7/00:00:00:00:00/e1 tag 0 dma 4096 in
Sep 26 22:49:54 revelation kernel: res 51/40:02:07:cc:f7/00:00:00:00:00/e1 Emask 0x9 (media error)
Sep 26 22:49:54 revelation kernel: ata1.00: status: { DRDY ERR }
Sep 26 22:49:54 revelation kernel: ata1.00: error: { UNC }
i did some googling and found out this may be due to damaged areas in the hard disk or the hard disk is about to fail. (is it true?)
I followed some other thread, used system rescue cd and did a fsck -f on the root partition. I still keep getting these randon freezes. is there anything i can do to fix these?
your help is appreciated.
Last edited by greylogic (2009-09-27 03:00:43)

I used the 80 wire cable that came with the board and ran the WD's jumperless (cable select) with the drive at one end and the blue connector on the MB. I also tried a 40 wire cable with the drive set to master. Both of these scenarios worked fine on my other computer, which I switched back and forth several times to prove to myself that the drives were fine and the cables were ok.
I did run spinrite from dos and was always able to work with the drives as long as I selected LBA access and disabled [Integrated Peripherals]->[VIA OnChip IDE Device]->[IDE DMA Transfer Access].
The MB never autodetected any of the drives correctly. Only when I used the the older WD 1200JB with access mode set to [LBA] and disabled IDE DMA Transfer Access did i get partial success. Admittedly, this is a very obscure problem and not many others are hitting. Hopefully the service guys will be able to sort it out since it is easy to reproduce.
I never used that JPWR2 connector, the manual stated that it was to supply power to the graphics card but my card has a regular 4 pin molex that i could get directly from the power supply. Wonder if the board would blow up if someone stuck the 4pin lead from their PSU in there ... maybe not such a great feature.
I did not try a single CPU or run memtest86 - things I probably should have tried. The problem to me seemed to be the integrated IDE controller was just not working correctly, so after changing ram, power supply, drives etc and seeing the exact same problem with the hard disk, I became more convinced it was just a flakey board. Plus the need to clear CMOS and reboot constantly to get the board to post added to theory.
Oh well, it is in RMA land now, so when it comes back I will let you know how it goes.

Query with date in where clause

hi,
i have build a view with join conditions from 8 tables. the data from this view is more then 100,000
when i run the query with different clause its work with some seconds. but when i put date column in where cluase it sleeps.
eg..
where unit_id = 4 and t_id = 's09' and vb like '%amb%'
works fine.
where unit_id = 4 and t_id = 's09' and vb like '%amb%' and date between dt1 and dt2
now sleep
please ......give me some suggestions

hi i have done the explain plan
the result is
Operation Object
SELECT STATEMENT ()
NESTED LOOPS ()
NESTED LOOPS ()
HASH JOIN ()
HASH JOIN ()
TABLE ACCESS (FULL) PR_PO_MST
TABLE ACCESS (FULL) PR_SUPPLIER
TABLE ACCESS (FULL) PR_PO_DTL
TABLE ACCESS (BY INDEX ROWID) INDENT_MST
INDEX (RANGE SCAN) ST_IND_MST_IDX
TABLE ACCESS (BY INDEX ROWID) ST_ITEM
Operation Object
INDEX (UNIQUE SCAN) PK_ST_ITEM
now wot do do????

Input query with dynamic actual & forecast values by month per year

Hello,
I am working on a Input ready query for a forecasting application which shows both actuals and forecast numbers and the user will revise the forecast numbers by month
Requirement: I want to build a Input query for monthly forecasting for the current year. It will be dynamic rolling of months with actuals & forecast data.
E.g. My report has 12 months for the current year
and if run the report in May, the months before May has to show the actuals and the months after May has to show the old forecast data so that the user will revise the numbers again in each month and save the data to the real time cube.
Jan.Feb.Mar.Apr.May.Jun.Jul.Aug.Sept.Nov.Dec
Act Act Act Act Act Old frcst for the remaining months
user will revise forecast for these months
So, i am able to create Input query with all restricted key figures( plan kf has change mode set to change, actual kf are not set change) and calculate key figures and all the logic is done on dynamically moving/rolling the data based on the input month of the year.
But the problem is that i am using cal kf to dynamically roll months, i was not able to set the change option for the cal kf.
So, how can i make sure that the dynamically changed plan months will open for entering forecast and the actuals months not to change?
Do you guys have any better solutions in implementing it?
I really appreciate it your input....:)
Thanks,
Srini

Hi,
Please look at the following DOC which may be useful to you and if so please grant me point.
Regards,
SUbha'
Input-Ready Query
Use
You use input-ready queries to create applications for manual planning. These can range from simple data entry scenarios to complex planning applications.
Integration
You define a query that you want to use for manual planning in the BEx Query Designer (see Defining New Queries).
In the Web Application Designer or the BEx Analyzer, you can combine the input-ready queries with other queries and planning functions to create complex planning applications.
Prerequisites
You can define an input-ready query on any of the following InfoProviders:
●     Aggregation levels (see Aggregation Levels)
●     MultiProviders that include at least one simple aggregation level
The aggregation levels are created in the planning modeler; MultiProviders are defined in the modeling functional area of the Data Warehousing Workbench.
Features
Definition of an Input-Ready Query
Once you have defined a query on an InfoProvider, you see the Planning tab page under the Properties of structural components (for example, in key figures or restricted key figures). The options provided there allow you to determine which structural components of an input-ready query are to be input ready at runtime and which are not. With structural components that are not input ready, you can also determine whether these components are viewed as reference data or are just protected against manual entry.
For the structural components, you also have the following options:
Input readiness of structural components of a query
Option
Description
Not input ready (reference data)
If they are being used as reference data, the structural components are not protected by data locks to ensure exclusive access for one user because this data serves as a reference for many users.
This is the default setting.
Not input ready (no reference data)
If you want to protect structural components against manual entries but allow changes by planning functions, you can use locks to protect this data for one particular user. In this way you can ensure that the planning function works with the displayed data only and not with data that has been changed by other users.
Input ready
You can also determine whether an input ready query is to be started in change mode or in display mode. You find this property in the Query Properties on the Planning tab page. If there is at least one input-ready query component, the query (as long as it has not been determined otherwise) is started in display mode.
In BI applications that use input ready queries as data providers, you can enter data manually at runtime. For more information, see Performing Manual Planning and Creation of Planning Applications.
Example
You want to create an input-ready query for manual planning for a plan-actual comparison of revenues for a set of products. You want the plan data in a real-time-enabled InfoCube and the actual data in a standard InfoCube.
       1.      Create a MultiProvider that includes the InfoCubes for the plan and actual data.
       2.      Define an aggregation level on the MultiProvider which contains the characteristic Product and the key figure Revenue.
       3.      On the aggregation level, create two restricted key figures Plan Revenue and Actual Revenue. For restriction, choose the characteristic 0INFOPROV and restrict it to the plan or actual InfoCube.
       4.      Add the restricted key figures to the key figure structure. Insert Product into the rows. For Plan Revenue, choose Input Ready for the input-readiness option. For Actual Revenue, choose the option Not Input Ready (Reference Data).
       5.      In the query properties, set the indicator that determines whether the queries are started in display or change mode as required.
Example of an input-ready query
Product
Plan Revenue
Actual Revenue
P01
20
P02
30
If you want to keep actual and plan data in a real-time enabled InfoCube, you do not require a MultiProvider for the task described above. Create an aggregation level on the InfoCube and define the input-ready query for the aggregation level. In the example above, a version characteristic acts as the InfoProvider. Create restricted key figures with the plan or actual version and proceed as in the previous example.

Random Query with Access

Similar Messages

Maybe you are looking for