SQL Query with MS-Access Database
Hi,
I have linked my oracle database with MS-Access via a DB LINK. i can access the data from MS-ACCESS, but i have a problem that when i specify the column name or define a where clause in my query it gives me the error ORA-00904: invalid identfier ..
This query fetch the data without any problem SELECT * FROM TBLREPORT@M_ACCESS but when i run SELECT EMP_ID FROM TBLREPORT@M_ACCESS it gives me the error i mentioned above. (Column name have No problem or mistake of spelling even CASE)
also when i try to put where clause in the query it gives me same error SELECT * FROM TBLREPORT@M_ACCESS WHERE EMP_ID = '100' (Error)
is there any change in SQL query for ACCESS database ??
any clue
Regards
Rehman
Are column/table names in access case sensitive? Issue
DESC TBLREPORT@M_ACCESS If column EMP_ID actual name shows up in mixed/lower case, enclose it in double quotes and use the exact case. E.g., if column name shows up as Emp_Id, use:
SELECT "Emp_Id" FROM TBLREPORT@M_ACCESSSY.
Similar Messages
-
SQL query to find access database files?
Odd request, but does anyone have a SQL query to find files? Specifically, I am looking for machines that have access databases on them. .mdb & .accdb
Have you enabled inventory for them?
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ
i was trying to figure out where that option was but couldn't find it under hierarchy settings. perhaps it's been changed since 2012 R2? can you help point it out? -
SQL query with Bind variable with slower execution plan
I have a 'normal' sql select-insert statement (not using bind variable) and it yields the following execution plan:-
Execution Plan
0 INSERT STATEMENT Optimizer=CHOOSE (Cost=7 Card=1 Bytes=148)
1 0 HASH JOIN (Cost=7 Card=1 Bytes=148)
2 1 TABLE ACCESS (BY INDEX ROWID) OF 'TABLEA' (Cost=4 Card=1 Bytes=100)
3 2 INDEX (RANGE SCAN) OF 'TABLEA_IDX_2' (NON-UNIQUE) (Cost=3 Card=1)
4 1 INDEX (FAST FULL SCAN) OF 'TABLEB_IDX_003' (NON-UNIQUE)
(Cost=2 Card=135 Bytes=6480)
Statistics
0 recursive calls
18 db block gets
15558 consistent gets
47 physical reads
9896 redo size
423 bytes sent via SQL*Net to client
1095 bytes received via SQL*Net from client
3 SQL*Net roundtrips to/from client
1 sorts (memory)
0 sorts (disk)
55 rows processed
I have the same query but instead running using bind variable (I test it with both oracle form and SQL*plus), it takes considerably longer with a different execution plan:-
Execution Plan
0 INSERT STATEMENT Optimizer=CHOOSE (Cost=407 Card=1 Bytes=148)
1 0 TABLE ACCESS (BY INDEX ROWID) OF 'TABLEA' (Cost=3 Card=1 Bytes=100)
2 1 NESTED LOOPS (Cost=407 Card=1 Bytes=148)
3 2 INDEX (FAST FULL SCAN) OF TABLEB_IDX_003' (NON-UNIQUE) (Cost=2 Card=135 Bytes=6480)
4 2 INDEX (RANGE SCAN) OF 'TABLEA_IDX_2' (NON-UNIQUE) (Cost=2 Card=1)
Statistics
0 recursive calls
12 db block gets
3003199 consistent gets
54 physical reads
9448 redo size
423 bytes sent via SQL*Net to client
1258 bytes received via SQL*Net from client
3 SQL*Net roundtrips to/from client
1 sorts (memory)
0 sorts (disk)
55 rows processed
TABLEA has around 3million record while TABLEB has 300 records. Is there anyway I can improve the speed of the sql query with bind variable? I have DBA Access to the database
Regards
IvanMany thanks for your reply.
I have run the statistic already for the both tableA and tableB as well all the indexes associated with both table (using dbms_stats, I am on 9i db ) but not the indexed columns.
for table I use:-
begin
dbms_stats.gather_table_stats(ownname=> 'IVAN', tabname=> 'TABLEA', partname=> NULL);
end;
for index I use:-
begin
dbms_stats.gather_index_stats(ownname=> 'IVAN', indname=> 'TABLEB_IDX_003', partname=> NULL);
end;
Is it possible to show me a sample of how to collect statisc for INDEX columns stats?
regards
Ivan -
How to execute a SQL Query in Ms-Access
Hi,
I've a query which fetches the data from the tables based on daily transactions.
I mean, the data gets updated daily basis.
Now, i want to send the user a Ms-access work sheet with the query written, so that when ever the query is executed, it would fetch the records (with latest updates).
I found some documents in google to, how to write sql query in ms-access.
How ever, i'm unable to find the connection setup.
how do i connect to oracle database using ms-access??
Can any one please help me regarding this.
Thanks,
SanthoshYou can try this tutorials
http://www.reo.gov/gis/tools/infobase/LinkAccessToOracle.pdf
Basically steps include,
Install and configure Oracle client
Configure ODBC DSN using correct TNS name configured in first step
Link the table from Msaccess, make sure you linked the table not import it. -
How to compare result from sql query with data writen in html input tag?
how to compare result
from sql query with data
writen in html input tag?
I need to compare
user and password in html form
with all user and password in database
how to do this?
or put the resulr from sql query
in array
please help me?Hi dejani
first get the user name and password enter by the user
using
String sUsername=request.getParameter("name of the textfield");
String sPassword=request.getParameter("name of the textfield");
after executeQuery() statement
int exist=0;
while(rs.next())
String sUserId= rs.getString("username");
String sPass_wd= rs.getString("password");
if(sUserId.equals(sUsername) && sPass_wd.equals(sPassword))
exist=1;
if(exist==1)
out.println("user exist");
else
out.println("not exist"); -
To connect oracle database with ms access database
i want to connect oracle database with ms access database
i have follow the following steps
1. create ms access database.
2. create system dsn.
3. make change in listener.ora.
4. make change in hs folder.
5.change the tnsname.ora.
6. lsnrctl stop and lsnrct start.
7. create database link in oracle sql*plus.
8.select the table of ms access
but i have return the foloowing error.
ORA-12154: TNS:could not resolve the connect identifier specified
using window 2000, oracle 10gHave a look on ths thread, may it helps ...
Re: copy access data into oracle with form builder 9i -
How to link dataTable component with Microsoft Access Database?
Please mail me @ [email protected]
Creator might not support MS Access yet but use this code for an access database connection will always work even through notepad or textpad:
import java.io.BufferedInputStream;
import java.io.File;
import java.io.FileInputStream;
import java.io.InputStream;
import java.util.Properties;
* @author Mark Hennessy
public class MyDataSource {
private static MyDataSource ds = null;
private static java.sql.Connection connection = null;
/** Creates a new singleton instance of MyDataSource */
private MyDataSource() {
try{
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
connection = java.sql.DriverManager.getConnection("jdbc:odbc:<db name>", "guest", "guest");
}catch(ClassNotFoundException cnf){
cnf.printStackTrace();
}catch(java.sql.SQLException sqle){
sqle.printStackTrace();
public static DataSource getInstance() {
if(ds == null)
ds = new DataSource();
return ds;
public java.sql.Connection getConnection() {
return this.connection;
public static void closeConnection() {
try{
connection.close();
}catch(java.sql.SQLException sqle){
sqle.printStackTrace();
plus set up the ODBC connection via click start , click run and then copy and paste the following "odbcad32.exe" without the quotes, click ok, click user DSN tab, click Add...button select Microsoft Access Driver (*.mdb) click finish, give <db name> name of ur access database, give any description <whatever> or leave blank click the select... button navigate to the access database u want to connect to in your java code and select it.
in calling program
public class CustomersImplimentation {
private static java.sql.Connection connection = null;
private java.sql.ResultSet rs = null;
public CustomersImplimentation(){
connection = MyDataSource.getInstance().getConnection();
public Customers[] findAll(){
java.util.ArrayList list = new java.util.ArrayList();
String sql = "SELECT * FROM CUSTOMERS";
try{
java.sql.Statement stmt = connection.createStatement();
rs = stmt.executeQuery(sql);
while(rs.next()){
list.add(new Customers(rs.getInt(1), rs.getString(2), rs.getString(3)));
}catch(java.sql.SQLException sqle) {
System.out.println((new StringBuilder()).append(
"SQLException :: executeQuery Cannot find all Customers:").append(sqle).toString());
Customers[] customers = new Customers[list.size()];
for(int i = 0; i < list.size(); i++){
customers[i] = (Customers)list.get(i);
return customers;
if you have a Customers class created with set and get methods and a constructor that takes an int string string i.e.
public Customers(int ID, String firstName, String lastName){}
then u should be able to run these classes from within creator with an access database. hope this helps?
regards
Henno -
Hosting company does not support SQL query with OUTFILE clause
From my mysql database, I want to allow the user to run a query and produce a csv / text file of our membership database. Unfortunately, I just found out my hosting company does not support the SQL query with OUTFILE clause for MySQL database.
Are there any other options available to produce a file besides me running the query in phpadmin and making the file available to users.
Thanks. GeorgeMaybe this external Export Mysql data to CSV - PHP tutorial will be of help
Cheers,
Günter -
SQL query with JSP and WML-parameters
Hey,
Could you help me?
I'm trying to do the following. WML deck card 1 send parameter to same WML deck's card help. I try to read the parameter with JSP in card help by putting the parameter to SQL query, but it doesn't work. I can read the parameter with WML in card help. I can also print the value of the parameter with JSP if I generate WML with JSP.
/*parameter sending from card 1 to card help*/
out.println("<go href='#helpcard'>");
out.println("<setvar name='valittukurssi' value='$(valittukurssi)'/>");
/*parameter read with WML in card help */
<p>Valitse kurssi.
$valittukurssi</p>
/'parameter read with JSP by generating WML with JSP*/
out.println("<p>$valittukurssi</p>");
/* SQL query with JSP */
ResultSet uudettulokset = uusilause.executeQuery("select * from kurssi where lyhenne='$valittukurssi'");
Thanks,
RampeYou're problem is easy to fix. You're confusing WML variables with JSP variables. See below:
>
/*parameter sending from card 1 to card help*/
out.println("<go href='#helpcard'>");
out.println("<setvar name='valittukurssi'
value='$(valittukurssi)'/>");
Above you set a var that will work on the phone, not in JSP.
/*parameter read with WML in card help */
<p>Valitse kurssi.
$valittukurssi</p>
Yes the above does display the parameter, because it is a client side WML var, but you cannot use this variable in the JSP code (that's why your SWL fails).
/'parameter read with JSP by generating WML with
JSP*/
out.println("<p>$valittukurssi</p>");Here's you're problem, the above line is EXACTLY the same as the one before it. When the container parses through this JSP code it translates the above line to:
<p>$valittukurssi</p> on the WML page and the CLIENT uses it's local variable to display it.
What you need and want is to have a variable that can be used in JSP code and output to your WML page. Here's how it's done:
out.println("<go href='#helpcard'>");
String some_name = "valittukurssi";
out.println("<setvar name='"+some_name+"'
value='$("+some_name+")'/>");
//note that you may have to escape the ( and ) with a \
//so we displayed the variable above into the WML page, now we can use it in the SQL query:
/* SQL query with JSP */
ResultSet uudettulokset =
uusilause.executeQuery("select * from kurssi where
lyhenne='"+some_name+"'");//the end of the command is: " ' " ) ;
Frank Krul
Got Node? -
How could I replace hard coded value in my sql query with constant value?
Hi all,
Could anyone help me how to replace hardcoded value in my sql query with constant value that might be pre defined .
PROCEDURE class_by_day_get_bin_data
in_report_parameter_id IN NUMBER,
in_site_id IN NUMBER,
in_start_date_time IN TIMESTAMP,
in_end_date_time IN TIMESTAMP,
in_report_level_min IN NUMBER,
in_report_level_max IN NUMBER
IS
bin_period_length NUMBER(6,0);
BEGIN
SELECT MAX(period_length)
INTO bin_period_length
FROM bin_data
JOIN site_to_data_source_lane_v
ON bin_data.data_source_id = site_to_data_source_lane_v.data_source_id
JOIN bin_types
ON bin_types.bin_type = bin_data.bin_type
WHERE site_to_data_source_lane_v.site_id = in_site_id
AND bin_data.start_date_time >= in_start_date_time - numtodsinterval(1, 'DAY')
AND bin_data.start_date_time < in_end_date_time + numtodsinterval(1, 'DAY')
AND bin_data.bin_type = 2
AND bin_data.period_length <= 60;
--Clear the edr_class_by_day_bin_data temporary table and populate it with the data for the requested
--report.
DELETE FROM edr_class_by_day_bin_data;
SELECT site_to_data_source_lane_v.site_id,
site_to_data_source_lane_v.site_lane_id,
site_to_data_source_lane_v.site_direction_id,
site_to_data_source_lane_v.site_direction_name,
bin_data_set.start_date_time,
bin_data_set.end_date_time,
bin_data_value.bin_id,
bin_data_value.bin_value
FROM bin_data
JOIN bin_data_set
ON bin_data.bin_serial = bin_data_set.bin_serial
JOIN bin_data_value
ON bin_data_set.bin_data_set_serial = bin_data_value.bin_data_set_serial
JOIN site_to_data_source_lane_v
ON bin_data.data_source_id = site_to_data_source_lane_v.data_source_id
AND bin_data_set.lane = site_to_data_source_lane_v.data_source_lane_id
JOIN (
SELECT CAST(report_parameter_value AS NUMBER) lane_id
FROM report_parameters
WHERE report_parameters.report_parameter_id = in_report_parameter_id
AND report_parameters.report_parameter_group = 'LANE'
AND report_parameters.report_parameter_name = 'LANE'
) report_lanes
ON site_to_data_source_lane_v.site_lane_id = report_lanes.lane_id
JOIN (
SELECT CAST(report_parameter_value AS NUMBER) class_id
FROM report_parameters
WHERE report_parameters.report_parameter_id = in_report_parameter_id
AND report_parameters.report_parameter_group = 'CLASS'
AND report_parameters.report_parameter_name = 'CLASS'
) report_classes
ON bin_data_value.bin_id = report_classes.class_id
JOIN edr_rpt_tmp_inclusion_table
ON TRUNC(bin_data_set.start_date_time) = TRUNC(edr_rpt_tmp_inclusion_table.date_time)
WHERE site_to_data_source_lane_v.site_id = in_site_id
AND bin_data.start_date_time >= in_start_date_time - numtodsinterval(1, 'DAY')
AND bin_data.start_date_time < in_end_date_time + numtodsinterval(1, 'DAY')
AND bin_data_set.start_date_time >= in_start_date_time
AND bin_data_set.start_date_time < in_end_date_time
AND bin_data.bin_type = 2
AND bin_data.period_length = bin_period_length;
END class_by_day_get_bin_data;In the above code I'm using the hard coded value 2 for bin type
bin_data.bin_type = 2But I dont want any hard coded number or string in the query.
How could I replace it?
I defined conatant value like below inside my package body where the actual procedure comes.But I'm not sure whether I have to declare it inside package body or inside the procedure.
bin_type CONSTANT NUMBER := 2;But it does't look for this value. So I'm not able to get desired value for the report .
Thanks.
Edited by: user10641405 on May 29, 2009 1:38 PMDeclare the constant inside the procedure.
PROCEDURE class_by_day_get_bin_data(in_report_parameter_id IN NUMBER,
in_site_id IN NUMBER,
in_start_date_time IN TIMESTAMP,
in_end_date_time IN TIMESTAMP,
in_report_level_min IN NUMBER,
in_report_level_max IN NUMBER) IS
bin_period_length NUMBER(6, 0);
v_bin_type CONSTANT NUMBER := 2;
BEGIN
SELECT MAX(period_length)
INTO bin_period_length
FROM bin_data
JOIN site_to_data_source_lane_v ON bin_data.data_source_id =
site_to_data_source_lane_v.data_source_id
JOIN bin_types ON bin_types.bin_type = bin_data.bin_type
WHERE site_to_data_source_lane_v.site_id = in_site_id
AND bin_data.start_date_time >=
in_start_date_time - numtodsinterval(1, 'DAY')
AND bin_data.start_date_time <
in_end_date_time + numtodsinterval(1, 'DAY')
AND bin_data.bin_type = v_bin_type
AND bin_data.period_length <= 60;
--Clear the edr_class_by_day_bin_data temporary table and populate it with the data for the requested
--report.
DELETE FROM edr_class_by_day_bin_data;
INSERT INTO edr_class_by_day_bin_data
(site_id,
site_lane_id,
site_direction_id,
site_direction_name,
bin_start_date_time,
bin_end_date_time,
bin_id,
bin_value)
SELECT site_to_data_source_lane_v.site_id,
site_to_data_source_lane_v.site_lane_id,
site_to_data_source_lane_v.site_direction_id,
site_to_data_source_lane_v.site_direction_name,
bin_data_set.start_date_time,
bin_data_set.end_date_time,
bin_data_value.bin_id,
bin_data_value.bin_value
FROM bin_data
JOIN bin_data_set ON bin_data.bin_serial = bin_data_set.bin_serial
JOIN bin_data_value ON bin_data_set.bin_data_set_serial =
bin_data_value.bin_data_set_serial
JOIN site_to_data_source_lane_v ON bin_data.data_source_id =
site_to_data_source_lane_v.data_source_id
AND bin_data_set.lane =
site_to_data_source_lane_v.data_source_lane_id
JOIN (SELECT CAST(report_parameter_value AS NUMBER) lane_id
FROM report_parameters
WHERE report_parameters.report_parameter_id =
in_report_parameter_id
AND report_parameters.report_parameter_group = 'LANE'
AND report_parameters.report_parameter_name = 'LANE') report_lanes ON site_to_data_source_lane_v.site_lane_id =
report_lanes.lane_id
JOIN (SELECT CAST(report_parameter_value AS NUMBER) class_id
FROM report_parameters
WHERE report_parameters.report_parameter_id =
in_report_parameter_id
AND report_parameters.report_parameter_group = 'CLASS'
AND report_parameters.report_parameter_name = 'CLASS') report_classes ON bin_data_value.bin_id =
report_classes.class_id
JOIN edr_rpt_tmp_inclusion_table ON TRUNC(bin_data_set.start_date_time) =
TRUNC(edr_rpt_tmp_inclusion_table.date_time)
WHERE site_to_data_source_lane_v.site_id = in_site_id
AND bin_data.start_date_time >=
in_start_date_time - numtodsinterval(1, 'DAY')
AND bin_data.start_date_time <
in_end_date_time + numtodsinterval(1, 'DAY')
AND bin_data_set.start_date_time >= in_start_date_time
AND bin_data_set.start_date_time < in_end_date_time
AND bin_data.bin_type = v_bin_type
AND bin_data.period_length = bin_period_length;
END class_by_day_get_bin_data; -
How to write sql query with many parameter in ireport
hai,
i'm a new user in ireport.how to write sql query with many parameters in ireport's report query?i already know to create a parameter like(select * from payment where entity=$P{entity}.
but i don't know to create query if more than 1 parameter.i also have parameter such as
$P{entity},$P{id},$P{ic}.please help me for this.
thanksYou are in the wrong place. The ireport support forum may be found here
http://www.jasperforge.org/index.php?option=com_joomlaboard&Itemid=215&func=showcat&catid=9 -
Need help with SQL Query with Inline View + Group by
Hello Gurus,
I would really appreciate your time and effort regarding this query. I have the following data set.
Reference_No---Check_Number---Check_Date--------Description-------------------------------Invoice_Number----------Invoice_Type---Paid_Amount-----Vendor_Number
1234567----------11223-------------- 7/5/2008----------paid for cleaning----------------------44345563------------------I-----------------*20.00*-------------19
1234567----------11223--------------7/5/2008-----------Adjustment for bad quality---------44345563------------------A-----------------10.00------------19
7654321----------11223--------------7/5/2008-----------Adjustment from last billing cycle-----23543556-------------------A--------------------50.00--------------19
4653456----------11223--------------7/5/2008-----------paid for cleaning------------------------35654765--------------------I---------------------30.00-------------19
Please Ignore '----', added it for clarity
I am trying to write a query to aggregate paid_amount based on Reference_No, Check_Number, Payment_Date, Invoice_Number, Invoice_Type, Vendor_Number and display description with Invoice_type 'I' when there are multiple records with the same Reference_No, Check_Number, Payment_Date, Invoice_Number, Invoice_Type, Vendor_Number. When there are no multiple records I want to display the respective Description.
The query should return the following data set
Reference_No---Check_Number---Check_Date--------Description-------------------------------Invoice_Number----------Invoice_Type---Paid_Amount-----Vendor_Number
1234567----------11223-------------- 7/5/2008----------paid for cleaning----------------------44345563------------------I-----------------*10.00*------------19
7654321----------11223--------------7/5/2008-----------Adjustment from last billing cycle-----23543556-------------------A--------------------50.00--------------19
4653456----------11223--------------7/5/2008-----------paid for cleaning------------------------35654765-------------------I---------------------30.00--------------19
The following is my query. I am kind of lost.
select B.Description, A.sequence_id,A.check_date, A.check_number, A.invoice_number, A.amount, A.vendor_number
from (
select sequence_id,check_date, check_number, invoice_number, sum(paid_amount) amount, vendor_number
from INVOICE
group by sequence_id,check_date, check_number, invoice_number, vendor_number
) A, INVOICE B
where A.sequence_id = B.sequence_id
Thanks,
NickIt looks like it is a duplicate thread - correct me if i'm wrong in this case ->
Need help with SQL Query with Inline View + Group by
Regards.
Satyaki De. -
Extract Sql Query with Actual Parameters from Report
Hi
I am able to extract query from Crystal Report using the following code :
ReportDocument.ReportClientDocument.RowSetController.GetSqlStatement(new GroupPath, out tmp);
But the sql query retrieve comes in the following format :
select name , trans_code, account_code from command_query.accounts
where account_code = {?Command_query_Prompt0} and effective_date < '{?Command_query_prompt1 }'
The parameters which I m using in the reports are :
Account_Code and Effective_Date .
Why does my extracted sql translates it into {?Command_query_Prompt0} and '{?Command_query_prompt1 }' .
Is there any way to map this to the actual parameter values ?
OR
Can we extract the query after assigning the values ?
Any help is appreciated ...
Thanks
Sanchethi,
You can create nested sql query with conditional parameters,
For example
Select Code From OITT Where Code IN (Select ItemCode From OITM
Where ItemName LIKE '[%0]' + '%%')
Edited by: Jeyakanthan A on Jun 9, 2009 12:31 PM -
Executing the SQL query across 2 different databases of Oracle
Hello All,
In Microsoft SQL server we can execute following type of SQL query across 2 different databases:
select * from TEST1.dbo.GENERIC_TABLE1 union select * from TEST2.dbo.GENERIC_TABLE2;
Here TEST1 and TEST2 are 2 different databases.
Can we do the same in Oracle?yes you can, but first one has to setup a database link
Look up CREATE DATABASE LINK and then take things from there!
P; -
Query 32 bit Access Database from 64 bit Sql Server
Hi All,
I have a task to query the Accessdb from Sql Server and below are the configuration details:
OS: Windows Server 2008 R2 Enterprise( 64 bit)
Sql Server: Sql Server 2012 enterprise (64 Bit)
Access : MS Office 2010 (32 bit)
I used the below queries to reap the data from access db.
SELECT * FROM OPENROWSET('Microsoft.Jet.OLEDB.4.0','D:\Product.accdb', Product) AS Product
(or)
SELECT * FROM OPENROWSET('MICROSOFT.ACE.OLEDB.12.0','D:\PRODUCT.ACCDB', PRODUCT) AS PRODUCT
following error returnd from both queries.
Error: "Msg 7438, Level 16, State 1, Line 2. The
32-bit OLE DB provider "Microsoft.Jet.OLEDB.4.0" cannot be loaded in-process on a 64-bit SQL Server."
Please help.
Ram MSBI Developernot sure if anyone is watching this thread anymore but i have this scenario. i am using the excel connection manager in SSIS to create an excel spreadsheet with VS 2012. To do this from what I have read I am required to use the 32-bit driver for "Microsoft
Access database engine 2007", if I use the 64-bit driver I cannot connect to the Excel connection manager. i get 0xc020801c message.
i can install the 32-bit "Microsoft Access database engine 2007" and resolve this problem. but i also have a stored procedure that creates a spreadsheet (i use this because i have to leave some cells intact), it appears to require the
64-bit "Microsoft Access database engine 2007". in 32-bit mode i get the following message
Msg 7438, Level 16, State 1, Procedure sp_CreateGRfile, Line 26
The 32-bit OLE DB provider "Microsoft.ACE.OLEDB.12.0" cannot be loaded in-process on a 64-bit SQL Server.
so i need both the 32-bit "Microsoft Access database engine 2007" and 64-bit "Microsoft Access database engine 2007".
any thoughts on getting around this issue?
Maybe you are looking for
-
Can I use flash drive in Windows that install on Oracle VM Server
Dear everyone, I install Windows server 2003 on Oracle VM Server x86. I can use .iso file by copy iso file to /OVS/iso_pools and add resource. But I want to use flash drive on Windows server 2003 that installed on Oracle VM. I don't know how to do or
-
Load some flat files from ftp location
HI, I have requirement, i want to load the some flat files from ftp location. but problem is in that ftp location i have multiple files.i want to load flat files starts with file name with numeric. otherwise i have apart from these start with numeric
-
Areca 1882x speed drop with a BBU - expected?
Anyone using an Areca ARC-1882x RAID controller with a BBU (Battery Backup Unit)? If so, any difference in performance with / without BBU, and did you have to change any settings? Here is what I am seeing on a client's Mac Pro with a CineRAID 12-bay
-
Replaced internal HD - now how to migrate Fusion /Bootcamp from old drive??
I haven't seen quite this situation yet....I recently upsized to a larger harddrive in my MacBook Pro. I backed up my internal 90GB hardrive to a new external Hitachi 200GB 7200 SATA drive using SuperDuper. Booted OSX 10.5.2 from the "new" external d
-
Please refer to TAR # 2005705.995 for more details. I am unable to migrate SQL Server 7.0 database into oracle 8i . While in the capturing stage I get the following errors shown in the attachment . It hangs while tyring to make indices. I tried abort