Ranking for Row grouping in SSRS report

Hi,
I want to display data in following format in ssrs report.
Rank Group Value
1 G1 10
2 G1 20
3 G1 30
4 G1 40
1 G2 25
2 G2 54
3 G2 64
I tried row count and other ranking functions but it did not working.
Please help.
Thanks,
Vivek Singh

Hi,
You can Try Rank , Dense Rank and Row Number Based on Your Requirements.
Because these three having Different functionality
Row number will returns unique values .
Rank is similar to Row number , except equal rows are ranked same
Dense Rank similar to Rank but it will not give any gapes.
select a.[group],a.value,RANK() over (partition by [Group] order by value)Rank1 from [msdn.rank] a
select a.[group],a.value,Dense_rank() over (partition by [Group] order by value)Rank1 from [msdn.rank] a
select a.[group],a.value,Row_number() over (partition by [Group] order by value)Rank1 from [msdn.rank] a
GVRSPK VENI

Similar Messages

Calculate percentage between two rows in a matrix report with a single row group in SSRS 2008

I need your help. I have a matrix report in ssrs 2008. The report contain one field value column and one value column. I need to calculate a percentage for two values. For example : row 1 : Discount 10 Row 2 : Sales 100 Result : 10/100. I have only one
row group, I need to have a condition where Field = Discount % on Revenue then Discount/Total Turnover. Because of the grouping for total, I am not being able to calculate the %, its just totalling the % discount. Kindly refer to the snapshot of the
report.

Hi Thanks a lot for your answer, but unfortunately it didn't work,the report is reading from a stored procedure which I have unpivot to convert all columns into rows, so that's why Discount % on Revenue, Discount and Total Turnover is found in one column.
So the Field!Col.Value is the Discount % on Revenue, Discount and Total Turnover. I have tried to change the code to
"=SUM(IIF(Fields!Col.Value = "Discount",Fields!value.Value),0))
/IIF(SUM(IIF(Fields!Col.Value = "Turnover Total",Fields!value.Value),0)) = 0 ,
Nothing,SUM(IIF(Fields!Col.Value = "Turnover Total",Fields!value.Value),0)))" but to no avail. Any other suggestion will be most welcome.
Thanks.
If everything you're getting from stored procedure then you need to calculate and bring the value from there itself.
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

Adding a chart for each group in ssrs not below are above the group in group footer or header. but side of the table data

Hi
I am currently adding a chart for each group on group footer in a table.
but i want that charts to be on the right side of the group data.
regards
Pratap M:)

Hi PratapM,
If I understand correctly, you have already added a chart in group footer, and you want to display the chart on the right side of the cell. If I have misunderstood, please don't hesitate to let me know.
Based on my research, if we directly add a chart into a cell, the chart will fill all of the space in the cell. So in order to achieve your requirement, we can insert this chart into a rectangle, then add the rectangle to the group footer. If we want to
display the chart on the right side, we can directly drag the chat to the right of the rectangle.
If there are any misunderstanding, please elaborate the issue for further investigation.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Expression for runing total for a group tablix not reporting properly

Hello,
I have this expression in my report
=Previous(RunningValue(Fields!Amount.Value,sum,"Group Name"))
But when I run the report the running total still runs to the next group.
Please hoe do I resolve this.
Thank you
Akintayo Kemi

Hi Akintayo,
According to your description, you want to get previous total for the data fields Amount. And you don't want the previous total value jump to next group. Right?
In this scenario, we can add a condition to make the value in the first row of each group to be null. Use the expression below:
=IIF(Fields!Amount.Value=First(Fields!Amount.Value,"Group Name"),nothing,previous(RunningValue(Fields!Amount.Value,sum,"Group Name")))
The result looks like below:
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

How Can we create parameter field for BP Group on Crystal Report

Hi,
I have something wrong:
I want to create parameter field on Crystal report to select multiple cardcode group, I use for that :
@Select * from ocrg
but when I execute the report the fiel don't give any thing to choice BP Group, it is a null fiel ?
Any Idea how can I do this otherwis
Ps: I want to precise group to display it.
Thanks in advance
Cdt
Malika

Hi Malika.....
Try this simple query report in Crystal with Parameter as CardGroup....
Select T0.CardCode, T0.CardName From OCRD T0
Where T0.GroupCode='{?GroupCode@Select * from OCRG}'
Take above query in command window.
GroupCode@Select * from OCRG
Take above condition in parameter window and then try to run in SAP.
You can see how CFL gets generated and you get values of CardGroup......
The above is only example.......
Regards,
Rahul

How to display different subtotal text for each group in alv report

Hi,
i need to display subtotal text as "totals of Mat1" for material numbers 1 to 10 as group1 and again i need to display subtotal text as " totals of Mat2" for material number 11 to 20.
group 2.
Please help me asap.

You can create subtotals by columns.
You would need extra column to group the materials( 1 to 10 GROUP1 20 to 30 GROUP2 by example) and use this column for subtotals

SSRS Report : Editable Textbox in footer to add Comments before printing the report

Hello,
I have created few SSRS reports and now in the footer of all the reports, there is a requirement to put the Editable Text so that Client can put comments about explaining the Reports and then export it.
Is there anyway we can have Editable Textbox in the footer?
Any other control I can use here?
Thank you,
Mittal.

Hi ,
there is no direct approach for the same but you can try workaround .
You can try below link;
http://techequation.com/wordpress/workaround-for-editable-textbox-in-ssrs-report-for-comment-option/
Thanks
Please Mark This As Answer or vote for Helpful Post if this helps you to solve your question/problem.

Format Expression not working properly in SSRS Report table cell

Hello, for negative number format i am using the following format expression "#,##0,,;(#,##0,,)". For negative zero (negative values rounded to zero) the expression works fine in excel sheets(Format Cell expression) but not giving parenthesis for
negative zero in SSRS Reports.
Please help me for this issue.
Thanks in advance

Can you try giving a custom format expression as below
=IIF(Val(Fields!FieldName.Value)<0,"(#,##0,,)", "#,##0,,")
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Lync 2013 custom SSRS reports from CDR

Trying to replicate canned Lync 2013 User Activity Report, but with more filtering capability, using SSRS. Necessary to do this way because we're adding details like user names, departments and locations from our Active directory.
Have been unable to ever find support on WHAT the query or stored proc IS behind the UA report. If I have that code I can incorporate that with our data.
Any help appreciated!
Jim Nelson
James Nelson

The CDR schema can be found here, which will be helpful for creating your reports:
http://technet.microsoft.com/en-us/library/gg398570.aspx
Most queries start from the SessionDetails Table:
http://technet.microsoft.com/en-us/library/gg398589.aspx
For hacking up existing SSRS reports to see what procedure or view they call, you'll have better luck asking in the SQL forums.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

How to hide columns in each page of SSRS report for grouped tablix

Hello all,
I have a requirement like when SSRS report (used row grouping)is exported to EXCEL
1) Each report page should be exported to a separate excel sheet
2) Each sheet will have different columns (that is some columns will hide in sheet2, sheet3...)
3) Eg: If a country report is there with details like country name, country code, currency code. Now each country details should export to separate excel sheet and sheet 1 should show Country Name and Country code; Sheet2 should show: Country Code, Currency
Code; Sheet3 should show: Country Name, Country Code, Currency Code.
I am done with point#1 above: Each report page should be exported to a separate excel sheet. Can some one help on point#2:Each sheet will have different columns (that is some columns will hide in sheet2, sheet3...)
Thanks,
Paandey : Dont forget to mark it as Answered if found useful

Hi paandey,
According to your description, there are three columns named country name, country code, currency code in the report. When export the report to excel, you want to show Country Name and Country code in sheet1, Country Code and Currency Code in sheet2, and
show all of the three columns in sheet3.
In Reporting Services, we couldn’t achieve your goal by setting visibility of columns in one tablix. As a workaround, we can use three tablix in the report, then add page break to the tablix. For detail information, please refer to the following steps:
1. Since you have created a tablix with three column, copy and paste it to the report twice.
2. Right-click column handle of Currency code in tablix1, click Column Visibility.
3. Check Show or hide based on an expression, click (fx) button, then type the expression:
=(Globals!RenderFormat.Name = “EXCELOPENXML”)
4. Right-click column handle of Country name in tablix2, set its visibility like step3 above.
5. Select and right-click tablix2, click Tablix Properties.
6. In General pane, in Page Break Options section, check Add a page break before check box.
7. Click Visibility in left pane, check Show or hide based on an expression, click (fx) button, then type the expression:
=(Globals!RenderFormat.Name <> “EXCELOPENXML”)
8. Select and right-click tablix3, add page break to it like step6 above.
9. Set its visibility like step7 above.
The following screenshot is for your reference:
For more information, please refer to the following document:
http://blogs.msdn.com/b/robertbruckner/archive/2010/05/16/report-design-naming-excel-worksheets.aspx
If you have any more questions, please feel free to ask.
Best Regards,
Wendy Fu

How To Restrict Number Of Rows For Multiple Group In Report Output

Hi ,
I have a requirement to restrict number of rows in report output.I have three different group , if i use same no of rows to restrict then output is as expected but if i want Deduction group should have 7 rows , earning should have 5 rows and Tax group have 3 rows in report output then XML tag is not working.
Below is the XML tag i am using -
First i have declare the variable to restrict the rows -
<xsl:variable name="lpp" select="number(7)"/>
<xsl:variable name="lpp1" select="number(5)"/>
<xsl:variable name="lpp2" select="number(3)"/>
For Each -
<?for-each:PAYSLIP?>
<xsl:variable xdofo:ctx="incontext" name="DedLines" select=".//AC_DEDUCTIONS"/>
<xsl:variable xdofo:ctx="incontext" name="EarLines" select=".//AC_EARNINGS[ELEMENT_CLASSIFICATION!='Taxable Benefits']"/>
<xsl:variable xdofo:ctx="incontext" name="EarTaxLines" select=".//AC_EARNINGS[ELEMENT_CLASSIFICATION='Taxable Benefits']>
<?for-each:$DedLines?><?if:(position()-1) mod $lpp=0?> <xsl:variable name="start" xdofo:ctx="incontext" select="position()"/>
<?if:(position()-1) mod $lpp1=0?><xsl:variable name="start1" xdofo:ctx="incontext" select="position()"/
<?if:(position()-1) mod $lpp2=0?><xsl:variable name="start2" xdofo:ctx="incontext" select="position()"/>
Report output is tabular form (one page has two column - Earning and Deduction ) . Tax group comes below earning group.
Deduction Group -
<?for-each-group:$DedLines;./REPORTING_NAME?><?if:position()>=$start and position()<$start+$lpp?>
<?REPORTING_NAME?>
<?end if?><?end for-each-group?>
Earning Group -
<?for-each-group:$EarLines;./REPORTING_NAME?><?if:position()>=$start1 and position()<$start1+$lpp1?>
<?REPORTING_NAME?>
<?end if?><?end for-each-group?>
Tax Group -
<?for-each-group:$EarTaxLines;./REPORTING_NAME?><?if:position()>=$start2 and position()<$start2+$lpp2?>
<?REPORTING_NAME?>
<?end if?><?end for-each-group?>
Please let me know in case additional detail is require.
Thanks in Advance.
Thanks,
Harsh
Edited by: Harsh.rkg on Jan 14, 2013 9:43 PM

variable lpp2 is declare to restrict EarTaxLines -
<xsl:variable name="lpp2" select="number(2)"/>
This will help to restrict the no of rows on one page , if we have more then two tax benefits line then layout will roll over to continuation page.
As part of report output my expectation is if i restrict Earning , Deduction and Tax benefits to same no of line for example - variable lpp ,lpp1 and lpp2 have same value "number(2)" , we can see the layout is continue on next page (restrict every group can have max two lines) .This is the reason we have 4 header grid , deduction and Tax Benefit lines are rolled over to continuation page .But if we restrict different value for each variable then continuation page layout is missing .
When we tried for <xsl:variable name="lpp2" select="number(3)"/> value continuation page layout is not getting generate for both employee number .

Using same tablix column for 2 row groups

Hi. We run 2012 enterprise. My tablix is grouped (for the most part) by hidden primary (values are 5,10,15,20) , secondary and tertiary sort columns. And a couple of visible label items that are aligned left.
Every row's data columns are completely %, $ or numerically formatted depending on a hidden helper field i've snuck into the tablix row group data fields after the tertiary sort.
The primary sort column does equate to a label that I dont show right now. In biz terms that label is actually the highest from a grouping standpoint but isnt being used right now for anything. I left it for last.
As I put the finishing touches on this report, I'd like to display that label ahead of the 4 sections it represents using the same column being occupied by the 1st (leftmost) label that is currently visible. I'd like to center it in that column on
its own row and apply some shading to the cells to its right. And show nothing in those shadded cells. All without changing my dataset if possible.
To complicate things, I'd like to follow each of the 4 sections with a completely shaded row. No data at all but grid lines can show thru shading. Again without changing my dataset. Is there a feature in ssrs that deals with this
kind of visual nuance?

Hi Jeewan,
Try this formula, If I understood your question correctly it will work for you.

Adding ssrs chart for each group under group footer

Hi,
I have requirement of report design, user has ability to select single or multiple product name in parameter and it should display column headers for each group and chart for each group (product name).
Report Design
ProductName: A
Category JAN
FEB MAR
Sales 10
12 15
Budget 20
20 20
Chart Here
ProductName: B
Category JAN
FEB MAR
Sales 10
12 15
Budget 20
20 20
Chart Here
I want to repeat this for all products.
Please anyone can provide steps to how to achieve this design?

Hi Srikanth,
According to your description, you want to design a tablix to display header and chart for each group in its group header and footer. Right?
In Reporting Service, when we add header and footer for a group, the header row and footer row are still within this group. Anything we put in these two rows will be grouped. For your requirement, we created a sample report in our local environment. Here
are steps and screenshots for your reference:
1. Create a matrix. Columns are grouped by month. Rows are grouped by ProductName (with group header and footer).
2. Put the text/field of the first row into the group (ProductName) header. Delete the header row of matrix (the first row), select Delete rows only.
3. Insert a chart into the group footer. It looks like below:
4. Add a parameter for filtering data. Save and preview it looks like below:
Reference:
Understanding Groups (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Multiple Rows for Same Value in Matrix Report

Hello
I am trying to create a matrix report that shows different page for each Category. Report looks like follows:
Page1( for Category '1')
Agent |
Calls |
Sales
TestAgent1 18
3
TestAgent1 5
1
Page2( for Category '2')
Agent |
Calls |
Sales
TestAgent1 26
5
TestAgent1 13
2
The issue is as you can see in above table, that i am getting repeated rows for same agents. I have tried making a parent group on Agent but it would still keep showing multiple rows. Ideally, it should show each agent only once in each page.
Any help would be appreciated.
PS: I am new to SSRS and this is my first time on microsoft blog, so i apologize if i wasn't able to follow the protocols/culture here.
Thanks

Hi M Adnan,
According to your description, you want to show a total Calls and total Sales for same agent so that it has only one row for each agent in your category group. Right?
In this scenario, if you only have a row group for category, it will show all “detail rows” in this groups even the agent of these rows are same one. So we can add a row group, set those detail rows group by agent and use Sum function to get the total Calls
and Sales. It looks like below:
If we want to display each Page in horizontal, we just need one Category column group for grouping rows and use sum function to get total Calls and Sales for each agent. It looks like below:
Reference:
Understanding Groups (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Rows count for repetitive groups in tablix.

Hi All,
To make the story cut short, i will going to explain my scenario:
i have a tablis contro and i garoup it by a field say "Field1" which contains A and B values,
in my case we divide groups in two parts if it has rows more then 200.
so, my report output and my required is below :
Current Output -------------------------- Required layout
here 200, 20, 30 are number of rows per group.
now my requirement is if a group is repetitive
i need the all rows count for that value like in above case :
Header text of Group A should be like : A(220) i.e 200 +20
please help me on this...
it is very urgent for me
shashank

hi Simon,
thanks for reply, sorry, i skipped to mentioned that i have to provide multilevel grouping also, like
Group By: Field 1 -> Field 2 -> field3
so, to achieve my requirement by Sql as solution has no problem if i do not have multilevel grouping, but i have to provide that and in that case the query will be like,
“select distinct [column1],[Column2],[Column3],count(*) as rn from [table] group by [column1],[Column2],[Column3]”
which is problematic in my case.
so for doing this i need a solution apart from sql but by using SSRS Report end.
Thanks again.
Shashank

Ranking for Row grouping in SSRS report

Similar Messages

Maybe you are looking for