RAS error - Cannot open report document. --- 0x80004005

I am using RAS to open and examine a number of Crystal Reports and everything is working fine with the exception of 1 report. I can publish this report to a different BOE system and examine it fine without error using the same code, so I am trying to understand why the process is failing. The specific error thrown is:
com.crystaldecisions.sdk.occa.managedreports.ras.internal.ManagedRASException: Cannot open report document. --- 0x80004005
Unspecified error
cause:com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException: 0x80004005
Unspecified error---- Error code:-2147467259 Error code name:failed
detail: 0x80004005
Unspecified error
     at com.crystaldecisions.sdk.occa.managedreports.ras.internal.RASReportAppFactory.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.managedreports.ras.internal.RASReportAppFactory.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.managedreports.ras.internal.RASReportAppFactory.openDocument(Unknown Source)
Any insight as to why this error is thrown for this specific report?

The message shows that this specific report cannot be accessed.
Try to re-check the specific report both in the crystalreport designer and Infoview before using the code.
Thanks

Similar Messages

I cannot open iCloud documents on my MAC I went to preferences etc and it did not give me access. My error says I need an updated version of numbers but I have the latest version

Mac OSX 10.4
Processor 3.06
Numbers 2.3 (554)
I cannot open iCloud documents on my MAC I went to preferences etc and it did not give me access. My error says I need an updated version of numbers but I have the latest version

You cannot access iCloud on a Mac running Mac OSX 10.4. Are you sure, the system version is correct?
If you are running iWork '09 (iWork 09 9.0.1) on your Mac with Numbers 2.3, you must at least have MacOS X 10.5.6 installed.
if you want iCloud support for iOS apps, you need the iWork 9.3 update,see: About the iWork 9.3 Update
And this update requires OS X Lion v10.7.4
Is your iMac compatible with Lion or later?

Word Web App cannot open this document due to an unknown error. If the problem persists, try opening the file in Microsoft Word.

Word Web App cannot open this document due to an unknown error. If the problem persists, try opening the file in Microsoft Word.
Can anybody pls help me how to resolve this for which got strucked !!!!
Cheers !!
Praveen
Thanks in Advance !!! Cheers !!! Praveen

Hi Satheesh,
Thanks for quick Reply !!!
can u pls have a look that the below are Log Errors am getting .
Pls suggest me how to resolve that the all the services are in the running state only ,
1. Could not find default ServiceProxy or it does not implement
IWacServiceApplicationProxy.
2. Default service proxy not found while trying to get setting
WORDVIEWERSILVERLIGHTONLY.
Rgrds//Praveen
Thanks in Advance !!! Cheers !!! Praveen

Documents backup failure in commvault with error Cannot open file ReportViewer.dwp

Hi,
SharePoint Documents backup failure in commvault with error "Cannot open file ReportViewer.dwp" even all necessary permissions are available for all the sites , sql

Hi Praveen,
Whether you tried to backup the library using PowerShell exporting command.
Export sites, lists, or document libraries in SharePoint 2013:
http://technet.microsoft.com/en-us/library/ee428301(v=office.15).aspx
As the commvault is a third party tool and I am not familar with it, I suggest you ask the third party support or forum for help.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Error while opening report in Infoview

I am getting following error while opening report in Infoview.
Following is error generated in tomcat,
com.businessobjects.rebean.wi.ServerException: Cannot open document. Error during import. (DX0005)
     at com.businessobjects.rebean.fc.internal.platformspecific.xml.ras21.SAXHandlerERRORS$SAXHandlerERROR.initElement(SAXHandlerERRORS.java:108)
     at com.businessobjects.rebean.fc.internal.platformspecific.xml.SXMLHandling$StructuredSAXHandler.startElement(SXMLHandling.java:187)
     at com.businessobjects.rebean.fc.internal.platformspecific.xml.SXMLHandling$StructuredSAXHandler.startElement(SXMLHandling.java:202)
     at com.businessobjects.rebean.fc.internal.platformspecific.xml.SXMLHandling$StructuredSAXHandler.startElement(SXMLHandling.java:202)
     at org.apache.xerces.parsers.AbstractSAXParser.startElement(Unknown Source)
     at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanStartElement(Unknown Source)
     at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
     at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
     at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
     at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
     at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
     at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
     at javax.xml.parsers.SAXParser.parse(Unknown Source)
     at com.businessobjects.rebean.fc.internal.ras21.XMLviaRAS21Decode.openDocument(XMLviaRAS21Decode.java:537)
     at com.businessobjects.rebean.fc.internal.ras21.RAS21DocumentComAdapter.openDocument(RAS21DocumentComAdapter.java:69)
     at com.businessobjects.rebean.fc.internal.ras21.RAS21ReportEngineComAdapter.openDocument(RAS21ReportEngineComAdapter.java:100)
     at com.businessobjects.rebean.fc.internal.ReportEngineImpl.openDocument(ReportEngineImpl.java:249)
     at org.apache.jsp.viewers.cdz_005fadv.viewCDZDocument_jsp._jspService(viewCDZDocument_jsp.java:267)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
     at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
     at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
     at java.lang.Thread.run(Thread.java:534)
Caused by: java.lang.Exception: Cannot open document. Error during import. (DX0005) (80043746)
     at com.businessobjects.rebean.fc.internal.platformspecific.xml.ras21.SAXHandlerERRORS$SAXHandlerERROR.initElement(SAXHandlerERRORS.java:100)
Please help me to resolve the above problem
Reagrds,
Ramesh

Hi Ramesh,
It may seem like a lot of information, but from a debugging perspective it doesn't tell us much.
You need to give some more info and even then it would probably be a good idea to call support.
Can you tell us;
Which version are you on?
Can you open de document from another desktop intelligence machine, not only the one that it was built on?
- This checks ; you can import the document; the structure of the document is fine (not corrupted).
Can you refresh the document on that other machine?
- This check ; the link to the universe is fine, the universe can be imported, the connection to the database is fine.
What is your preference as a BOE user to view Deski documents?
- Try a few others, so you know if the problem is with one type only (and which).
Now you will have a few more pointers more as to where the problem lies.
Even then it can be sheer size of the document, complexity of it, etc.
Good luck,
Marianne

Upgrade Plug-ins error (Cannot Open File)

I was working on a document in CS3 as a final thesis for my masters work. I was using a Blurb template in order to export the file for printing. In between working on the file, one afternoon I could no longer open the file and was met with the follwing error:
Cannot Open File
IMAGE.RPLN
IMAGE FILTERS.RPLN
HYPERLINKS.RPLN
"Cannot open "Masters_book dec.indd".
Please upgrade your plug-ins to their latest
versions, or upgrade to the latest version of
Adobe InDesign."
I hadn't changed any other files on my computer or ran any updates. I was simply met with the error when I tried launching the application. After trying to run necessary updates I was still met with the same error message. I downloaded the trial version of CS5 on another machine and tried to open it and was once again met with the above error message. I have a back up of the file that I can use but it still represents a lot of lost work if I have to resort to an old file.

I probably shouldn't dwell, on this, but I can get really worked up over it.
I come from the Cosmos and I can assure you we have sent no "Rays" to your puny Earth Planet today!(*)
Since this concerns a CS3 file and I haven't seen posts of others having the same issue, either with CS3 or with any other version, I have to take it as a One-Time Fluke.
I'm pretty firmly convinced this never happens. There are real problems and even if we only see them once, they are happening hundreds and thousands of times and going unreported and undetected, but they are no less real. In fact, because of the reporting bias towards repeatable problems, they are probably causing added frustration and confusion without being detected or fixed properly. So, IMNSHO, we owe a larger duty to pay attention to so-called "unreproducible" bugs.
(You can imagine how well these conversations with Adobe Support go...)
Of course, in this case, it's probably really hard to find the problem. And since it's effectively an end-of-life'd product that is 3 versions behind the released product and at least 4 versions behind the development product, well, it's hard to lose too much sleep over it.
(*) Yes, I know, this incident would not have been "today." Consider it time dilation.

Cannot open Word document attachment in mail before sending.

Cannot open Word document attachment in mail before sending.
In Snow Leopard Mail 4, (Version 4.0 (1075/1075.2)) if I attach a word document to a message and, BEFORE sending the message, I double click the attached document to open it, to make sure it is the right one, I get the error "Mail was unable to save the attachment “Test.doc” to disk. Verify that your downloads folder exists and is writable."
The attachment is mailed correctly and arrives at the destination, but the ability to verify an attached document before sending it is essential. This has worked fine in all previous editions of OS X.
Any ideas?
Thanks - Lawrence

I have same problem. I've done the following testing to pinpoint where the problem lies and there are clues (see below):
1. My machine had SnowLeopard installed "fresh" (i.e. disk reformat and installed cleanly)
2. I have a comparison machine running Leopard (10.5.6) - essentially a mirror but with different OS
3. Problem is triggered when creating new email, with a MS Word .doc attachment added. If you attempt to open the attached file in the mail (not yet sent) it produces the error message "unable to save file XXX.doc to disk. Verify that your downloads folder exists and is writeable"
4.However, once the mail is sent, the recipient can open the attachment without problems.
5. I have run Disk Utility and all permissions are correct. My downloads folder exists.
6. The problem is not present in Leopard (mirror machine other than OS)
7. I have uninstalled and reinstalled MS Office. Problem still present
8. I have deleted and recreated the preference files for both MS Office and for Mail. Problem still present.
And finally...
9.The problem is confined to .doc files.It works fine for .pdf, .ods AND even for Microsoft .xls files.
So it may be a MS Word problem triggered by Snow Leopard?
Apple: if you can confirm this is a Microsoft problem it may be able to be reported to them as a compatibility issue?
Hope this helps.

Error in opening reports in OBIEE

We are getting this error when opening reports in OBIEE
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. Unable to find library 'libclntsh.so.9.0'. [nQSError: 46029] Failed to load the DLL /u01/app/oas/product/10.1.4b/OracleBI/server/Bin64/libnqsdbgatewayoci8i64.so. Check if 'Oracle OCI 8.x' database client is installed. (HY000)
Our envirnment details:
OBIEE version 10.1.3.4
Unix platform : HP-UX ia64
Reporting Databse version : 11.2.0.1.0

Hi Vaidya,
I'm not sure how much I can help you but from the error log I can see there is some issue when deploying transformations. Have you implemented any transformations in BI? If yes please check if they are applied properly and working fine in BI. Then try to open the report in portal.
Here is a document on modeling transformations in BI https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/dc43c445-0d01-0010-23a1-ca348ff5f975
Hope it is helpful.
Regards,
Seema Rane.

Cannot open a document in adobe reader x

I cannot open a document(.pdf) under recent documents as i get an error message that the file cannot be found? Why? I did open both of them the other day. Under recent files both of these documents are listed in duplicate. Thanks for your help.

This means the file was moved, deleted, or on a network share or device that is no longer available..

Error: cannot read: C:\Documents; and Settings\JR\Desktop\logrand.java

Thats the problem.
Bug started happening all the sudden.
Double click a java file on the desktop that just two second before was built fine. Go to build it and it says that.
"error: cannot read: C:\Documents; and Settings\JR\Desktop\logrand.java"
Now note this is a file in the IDE.
copy/paste/change file name/brand new file/turn off the computer. Everything on the desktop path says that same error message. Then i noted the semicolon in the middle of the path after documents. The compilier has misspelled the path name. Its open the file in the IDE but somehow the build step gets a path with a semicolon in the middle.
What do i do?

dont bother.
it felt like some sort of corruption so i just reinstalled netbeans and that did the trick.
I was still using 3.5 any way =)

Getting error "Cannot initialize Report Engine server. (RWI 00226)"

Hello All,
We have BO XI 3.1 running on AiX 5.3 and db2 9.5 with fixpack 6.
I am getting error "Cannot initialize Report Engine server. (RWI 00226)" Whenever i am trying to create a document or report.
We were not getting this error earlier. getting it since few days.
currently our web intelligence processing server is not running and showing the status as "initializing and disabled".
every time when i tried to restart web intelligence processing server,it is going to initializing status only.
I tried to enable the trace for this server but it is not allowing me to do and throughing the error " Configuration, auditing or enable/disable state change rejected; server SIA.WebIntelligenceProcessingServer is currently being initialized."
I also tried creating a new instance of web intelligence processing server, even it has also gone to "initializing" status all the time.
Environment Information:
BOXI 3.1 SP2
OS: AIX 5.3
DB: DB2 9.5 Fix pack 6
Plese help in resolving this issue.
Thanks & Best Wishes,
Sachin.

Hi,
Thanks for your prompt response.
I already tried the solution provided by you. I stopped BO server completely and restarted it again but it does not worked for me.
I have stopped the old Web intelligence processing server and created a new instance and started, but the new one has not started but going to initializing status.
It even not allowing me to delete the newly created instance, saying that it is still in initializing status.
Please suggest me if anything else i need to check.
Thanks in advance.
Best Regards,
Sachin

Just updated Pages to version 5.1 on App Store but Pages doesn't show that it's updated and cannot open a document

I just updated the software in Pages to 5.1 on my iMac OS (Mavericks) but the Pages Application is giving me an error saying that I cannot open a document recently updated until I perform a software update!
When I am in Pages and to go About Pages it still shows Pages 4.3 (1098)

You have 2 Pages on your Mac.
Pages 5.1 is in your Applications folder.
Pages '09 is in your Applications/iWork folder.
You are alternately opening the wrong one.
Peter

Error when open fdf document from Safari

Reproduced on
* Adobe reader 9.1.0
* Acrobat Pro 8.1.3
NOT reproduced with Acrobat Pro 8.0.0( withou updates )
have simple fdf document for example in root of disk c:
=============
%FDF-1.2
1 0 obj
<<
/FDF
<<
/F (1.pdf)
/JavaScript
<<
/After 2 0 R
>>
>>
>>
endobj
2 0 obj
<<
>>
stream
endstream
endobj
trailer
<<
/Root 1 0 R
>>
%%EOF
================
when open it with IE or FF, al works fine. but when try to open in safari messagebox shown
"There was an error when open this document. This file cannot be found."

minified version of not worked fdf
%FDF-1.2
1 0 obj
<<
/FDF <</F (pdf.pdf) >>
>>
endobj
trailer
<<
/Root 1 0 R
>>
%%EOF

Cannot open the document with 'Composition failed to load'.

After confronting an error message during the publishing, I cannot re open the document with 'composition failed to load' message.
I desperately need to save this document! is there any chance to save it?
the screenshot is here.

Thank you for your help and advice.
It is great to be fixed in near future. good news!
Kim Kyoung Hong
Sent with Airmail
켜짐 2014년 10월 14일 에서 오후 3:58:58, Bharadwaj ([email protected]) 작성됨:
Cannot open the document with 'Composition failed to load'.
created by Bharadwaj in Edge Animate CC - View the full discussion
This is the error you are getting when you are opening the published content on web. This is a bug, but you can use the below fix.
Open the publish/web/index_edge.js and remove the "use strict"; statement at the beginning.
This will fix the problem. We will address this issue in the next release.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6822974#6822974
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Edge Animate CC by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Word 2008 "Word Cannot Open this Document"

I couldn't find a better forum so I'll put this here.
I have Microsoft Word Version 12.0, and have had it installed for a few months. I set the saving format to compatable by default (so it makes .doc and not .docx). Yesterday I was working on a word file I had saved on my thumb drive and it worked fine. Today I try to open it (both on my Macbook, my iMac and on a PC I had access to) and it gives me the following error: "Word cannot open this document. The document might be in use or might not be a valid Word document". I have noticed that this has happened to half a dozen of my other word files also. I notice that on my Macbook all of the word files have the new plain black and white icons that show the text in tiny writing, while the ones I can't open have the old blue file icons (on other, older computers they seem the same).
So I have three questions:
Is this a problem others have faced? If so, how can I get around it?
Are those particular files just corrupted? If so, is this a problem I ought to be wary of with Word 12?
If they are corrupted, is there any way I can rescue these texts? It's a very important document.
I eagerly await your responses.

Have you tried the Microsoft Word for macs forums? http://www.officeformac.com/ProductForums/

RAS error - Cannot open report document. --- 0x80004005

Similar Messages

Maybe you are looking for