RAW image date not exporting

Hi there
Currently I shoot everything as JPG, but would like to start using RAW on my Canon 300D. I have done a few trials, and find one thing perplexing – if I shoot in RAW the image date shows up in Aperture. When I export and add the exported JPG to my iView catalog, no Capture Date (image date equivalent) shows up. When I do the exact same steps after shooting in JPG, the Capture Date appears without any problem.
Is there a way to have the image date added to the metadata of the exported image?
Hannes

I'm not sure about this but the problem may be that there are different "flavors" of EXIF data. I believe there's a basic set of data that all camera manufactures have agreed to and then there's custom EXIF data specific to a camera, lens, strobe, or manufacturer.
It may be that Apple has chosen to only support the generic flavor(s) of data while ignoring the custom ones. I think that's why cell phone syncing with Address Book only gets some data to the phone. Pictures, groups, and the like are probably different for every phone and Apple decided not to support it. But I don't know that with certainty.
If you want to see what data is actually in the original and the exported files download a free copy of ExifTool by Phil Harvey from http://www.sno.phy.queensu.ca/~phil/exiftool/
It's a great tool and shows me more data for my Cannon camera's images than Canon's own software does.
MacBook Pro 17" (with crappy screen)   Mac OS X (10.4.8)  

Similar Messages

  • Image adjustments not exported

    Why are my image adjustments not exported with the images?

    The adjustments included: exposure, clarity, saturation, vibrance and tone curve. I was using the export feature.
    Date: Sun, 7 Nov 2010 11:51:11 -0700
    From: [email protected]
    To: [email protected]
    Subject: Image adjustments not exported
    What adjustments did you make that do not appear to be exported?  Can you show an example?
    Also, just for grins, are you talking about using the export feature or exporting to PS for additional adjustments?
    Thanks
    Walt
    B & B Photography
    >

  • Raw images are not opening in photoshop nor tiffs with light room adjustment

    raw images are not opening in photoshopcs5 nor tiffs with light room adjustment from lightroom3. need help have client dead line for today and monday..please help. thank you nancy

    I am too tired to go through all this again with an other forum, I also do not have the time, I must hand in my images monday morning...I will wait till you get back to me...it 8pm brussels time..I will continue working in capture one in the mean time... and hope you can find the answer...thank you for you help. sincerley
    nancy

  • Help! Read raw Image data from a file and display on the JPanel or JFrame.

    PLEASE HELP, I want to Read Binary(Raw Image)data (16 bit integer) from a file and display on the JPanel or JFrame.

    Hey,
    I need to do the same thing. Did you find a way to do that?
    Could you sent me the code?
    It's urgent, please.
    My e-mail is [email protected]

  • Read Binary(raw Image) data from a file

    Hi
    PLEASE HELP, I want to Read Binary(Raw Image)data (16 bit integer) from a file and display on the JPanel or JFrame.

    Hi, you'll need to use MemoryImageSource.
    You read each RGB triple and add it to a pixel[].
    Heres the roughg idea.
    Hope that helps.
    Harley.
    int width,height;
    int[] pixels = new int[width*height];
    while(!fileDone)
    for(int i=0; i<(width*height) i++){
    int rgb = inputStream.readInt();
    pixels[i] = rgb;
    DirectColorModel colorModel = new DirectColorModel(16,0xff00,0x00ff,0x00ff);
    MemoryImageSource memImage = new MemoryImageSource(width,height,pixels,0,width));

  • Why are RAW image thumbnails not being rendered?

    OK. I am not sure that I used the right terminology, but I have noticed that Bridge is no longer rendering (? proper term) the Canon Raw image thumbnails properly in Bridge CS6.
    I shoot RAW and Small JPEGs. I copy the folder of images onto my external hard from my camera and open Bridge. I see thumbnails of both the RAW and JPEGs with a black border around each image. As Bridge reads each image, the black border disappears from each JPEG thumbnail, but not from the RAW thumbnail like it used to do.
    When I click the raw thumbnail once, I get the larger RAW preview image. When I click the larger image and get the loop, the RAW thumbnail then renders and  either the black border disappears from the thumbnail or the corrections made in bridge become visible in the thumbnail.
    When the loop is on the larger preview image, the image in the loop enlarges automatically to 200% and I have to take the time to scale it back to read the image selection at 100%.
    When I do a batch edit of many RAW images in Bridge, I can click done and the small slider in a circle icon appears above the RAW thumbnail, but the thumbnail is not rendered to reflect the correctiuons made to the image.
    This was never an issue before. Bridge was great in reading RAW images at all stages and now it's not.
    Mac OS 10.9.2
    Processor  3.7 GHz Quad-Core Intel Xeon E5
    Memory  16 GB 1867 MHz DDR3 ECC
    Graphics  AMD FirePro D300 2048 MB

    Have you selected Prefer Embedded previews from the toolbar, or is it set to High Quality on Demand, or Always High Quality?
    Have you tried selecting the containing folder, right-clicking and clicking "purge cache for selection"?
    It sounds like you are having problems with the cache. Depending on the number of images you have and the speed of your computer, it might be worth purging the entire cache, but this should be a last resort.

  • SubReport Data not Exported to Excel Crystal Version10

    Hi,
    I have a main report and subreport in page header which displays Company Name ,
    When I export the report data to excel only the main report data is exported no subreport data is exported.
    Please can anyone let me know if this is a bug ... or am I missing out anything.
    I am using crystl reports version 10
    Cheers
    Rahul

    Hi Rahul
    As the subreport is placed in the page header, it will not export the data of the subreport to MS Excel Data only. This is an export limitation.
    In order to display the data of the subreport you can either use MS Excel (not Data only) or place the subreport in other sections of the main report.
    Thanks
    Poonam Thorat

  • RAW images are not displayed

    I noticed today that one of my albums containing old RAW images (3 years old) are not shown in the preview. The images have been modified in an older version of iPhoto, but the change is gone. I can still open through Photoshop or iPhoto but do not see the edited version anymore ... Does anyone have a clue why?

    Canon PS 9, 10 Canon EOS 300D, 40D ... all my previous cameras, but not all images. As said, there seems to be no rule. Some pictures in the middle of a "roll". But sometimes several events in succession. All images can be opened in Preview. All images can be displayed in the Finder and iPhoto QuickView. If I want to show the images in the preview, are shows the unedited version. If I want to edit the pictures back into iPhoto, then the old edits will become visible again (for some pictures) but they can not be saved.
    I have about 35,000 photos in the library, spread over about 1600 events.

  • Data not exporting to CSV

    I know this is going to be stupid and i'm kicking myself for not seeing why this is not working. But in my ELSE statement when i pipe that to a .csv i am getting blank lines.
    It outputs to the console fine just nothing in the .csv file.
    Thoughts ?
    Function get-mdtbuiltcomputers {
    param (
        [string[]]$computername='localhost'
        foreach ($comp in $computername) { 
        $path=Test-Path "\\$comp\c$\Windows\smsts.ini"
        $connected = Test-Connection -quiet -count 2 -delay 2 -ComputerName $comp
            if ($path -and $connected) {
                    $file=Get-ChildItem \\$comp\c$\Windows\smsts.ini
                    $Output = [ordered]@{'Computername'=$comp;
                                         'MDT Image Date'=$file.creationtime
                $obj = New-Object -TypeName psobject -Property $Output
                Write-Output $obj
            else
                Write-Output "$comp is unavailable or not a Standard MDT Image"
    Rich Thompson

    FYI:
    Here is a good way to guarantee consistent object generation.
    Function get-mdtbuiltcomputers {
    param (
    [string[]]$computername='localhost'
    foreach($comp in $computername){
    $p=[ordered]@{
    Computername=$comp
    Status='Unavailable or not a Standard MDT Image'
    MDTImageDate=$null
    $path=Test-Path "\\$comp\c$\Windows\smsts.ini"
    $connected = Test-Connection -quiet -count 2 -delay 2 -ComputerName $comp
    if($path -and $connected){
    $file=Get-ChildItem \\$comp\c$\Windows\smsts.ini
    $p.Status='Available'
    $p.MDTImageDate=$file.CreationTime
    New-Object PsObject -Property $p
    Avoid adding spaces in Property names.
    ¯\_(ツ)_/¯

  • Updated acr to 6.2.0.29, but LX5 raw images do not open

    Hi,
    I just purchased two cameras, the Panasonic dmc-fz100, and the dmc-lx5. I have no problem with the fz100, and can open the raw images in adobe photoshop cs5,(acr v 6.2.0.29), and can also convert these files to dng, using the dng converter v6.2.0.28. Unfortunately, I cannot open the raw files of the dmc-lx5. My operating system is OSX 10.6.4. Anybody run into this problem? Any suggestions?
    thanks for any help,
    Robert

    Hi,
    I can confirm that also using Windows Vista as operating systems the dng converter v6.2.0.28 doesn´t work with the Panasonic dmc-lx5 (program finds no files to process). I tried also Lightroom 3.2 which should be able to process the dmc-lx5 raw files according Adobe but here the same problem: Only a wildcard with the message "preview for this picture is not available" is shown instead of a preview.
    Any workaround available?
    thanks,
    Ralf

  • Output raw image data

    Hi,
    I'm using an industrialized camera. However, the labview program comes with it can only output 8-bit image. I am trying create a program that will only output the raw data image not the processed image, because I need image that's at least 10-bit. Any suggestions?
    P.S. I'm a new user to LabView and I'm using the 2012 version.
    Thanks.  

    Would you be able to modify the existing LabVIEW program by inserting a string indicator before the processing steps? Then you can manipulate the data however you want.
    I don't know if this will help, but once you have a binary file, you can read it directly with this:
    Cameron
    To err is human, but to really foul it up requires a computer.
    The optimist believes we are in the best of all possible worlds - the pessimist fears this is true.
    Profanity is the one language all programmers know best.
    An expert is someone who has made all the possible mistakes.
    To learn something about LabVIEW at no extra cost, work the online LabVIEW tutorial(s):
    LabVIEW Unit 1 - Getting Started
    Learn to Use LabVIEW with MyDAQ

  • Raw images do not display correctly in Yosemite

    Since installing Yosemite onto My MacBookPro I find some of the images in my RAW library no longer display correctly in Bridge and Photoshop. I am running Bridge 5.0.2.4 and Photoshop 13.0.6 x 64. These same images display correctly in other image viewing software e.g. Digital Photo Professional, Image Browser and Yosemite Finder.

    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Image format from RAW image data????

    Hi all, here is my problem...
    I have an Image object created by copying data from the clipboard. Now, the question is, how can I write this as an image to Database and file? I need the byte[] RAW data for DB and the best suted format for file saving.
    can anyone help me???
    thanx

    Hi all, here is my problem...
    I have an Image object created by copying data from the clipboard. Now, the question is, how can I write this as an image to Database and file? I need the byte[] RAW data for DB and the best suted format for file saving.
    can anyone help me???
    thanx

  • Raw images do not show up in Bridge CS4 for PSE 8 for Mac

    I just downloaded PSE 8 for Mac and my raw files no longer show as thumbnails.  I can open them in Elements, but the image is blank in Bridge.  These same images were fine in CS3 (PSE 6 for Mac).  I have downloaded and installed the new Camera Raw 5.6 plug-in but that didn't work.  Any suggestions?  Thank you!

    You have to update bridge separately from PSE, and bridge ships with a pretty old version of ACR. Just go to Help>Updates in bridge and it will update itself for you.

  • Image is not exporting to PDF correctly

    When I export my document, everything exports fine except one image.  It has been doing this with multiple images, as I've changed the image a couple of times to make sure that the image wasn't corrupted.  Why would it be doing this?
    How document should look:
    What happens when I export to PDF:

    Okay, I figured out what was making it be strange.  It seems that if I don't change the transparency or add any effects, it'll show up perfectly fine in the export; otherwise, if I do anything to it within effects, it won't show up on any document.  It seems to just be the nature of the picture; I wonder if it has to do with it being transparent?  Either way, I fixed the problem and am just going to use the picture without effects, as it looks better that way anyway.  Thank you though!

Maybe you are looking for