RD Services vs. Remote Desktop?

RD Services is basically Remote Desktop except it allows multiple user sessions, correct?
Is there a way to make an end-user's experience more clean?  Such as not showing Server Manager or Admin tools?

If the user is not an admin, there are a number of ways to lock down things for a standard user. Or else you can simply perform the following:
You can do it by registry change
Do not open Server Manager at logon
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Server Manager
0 to disable and open the window normally; 1 to enable and prevent the window from opening.
Do not open Initial Configuration Tasks at logon
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Server Manager\oobe
0 to disable and open the window normally; 1 to enable and prevent the window from opening.
or you can use the following GPO:
“Do Not Display Server Manager Automatically at Logon”
under Computer Configuration/policies/Administrative templates/System/Server Manager.
Hope this helps.
Naresh Negi (MSFT - Windows Performance Team) Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members
reading the thread.

Similar Messages

  • Windows 2012 R2 Active Directory Domain Services and Remote Desktop services Role on the same server.

    Findings: 
    Currently, Windows 2012 R2   AD DS role and RDS With Broker services can only seem to coexist properly in a new domain not an existing domain. Any attempt to add to an existing domain causes internal database user access denied issues and any attempt to
    adjust rights and circumvent is dubious at best.
    The escalation technician said it best. Out of 50 clients that want to do this, they end up not being able to help 5 right off the bat for whatever reason. As for the other 40 they might be able to help by running reports, adjusting rights and trying to add
    the roles until it works.  This can end up being a 20 day process. Basically they are playing whack-a-mole with user rights and permissions until something sticks.
    We tried creating an OU where any other domain policies would not be inherited to see if that was the issue, a fresh install with different sequence of adding the Roles, no effect.
    Given the errors I witnessed when running procmon and then trying to add the roles, the NT System and the Windows Internal database user had access denied issues on 100+ registry keys when trying to add the roles. After that the system is not behaving normally.
    The errors displayed almost mirror the errors that would occur on Windows 2012 when those two roles would be added which of course is officially NOT supported on that system.
    This blog needs serious revision:
    http://blogs.msdn.com/b/rds/archive/2013/07/09/what-s-new-in-remote-desktop-services-for-windows-server-2012-r2.aspx
    This is the excerpt from that blog: Single server RDS deployment including Active Directory. We now support running our RD Connection Broker role service on the same physical instance as an Active Directory Domain Controller.  In addition, we published
    guidelines for how RD Session Host could be used without the RD Connection Broker.
    Microsoft Support was curteous and helpful and they were the ones who advised cutting our losses, which mirrored my hunch after seeing what was transpiring in the system.  They refunded my money for the support call. 
    For me, it was an opportunity to find out if there was any way to configure Windows 2012 R2 in the Same manner that it was setup as Windows 2008 R2 and lay that to rest. The coexistence is poorly implemented. It is as if there was a reaction from all the deprecation
    of bread and butter features such as shadowing in TS and the coexistence of AD DS and RDS to where those features were re-added haphazardly. (I have no complaints on shadowing on Windows 2012 R2 it works, just do not like having to go to server manager to
    use it).
    I opted for virtualizing the Domain controller to eliminate the incompatibility issues and that is what I will be doing from now on. I found free solutions for backing up and reporting for virtual machines as well as the suggested procedures for configruing
    a Domain controller as a virtual machine on a Hyper-V environment and I will be sticking to those. Thus far the setup has been operational.
    I am not allergic to virtualization, but for really small setups it adds additional time and considerations but if that is how it has to be done, so be it. Windows 2008 R2 days are numbered and since we can usually squeeze 5-7 years on quality server equipment,
    buying a Windows 2008 R2 setup now is a borderline disservice in my opinion.
    Hopefully someone finds this useful and saves some time.

    Hi,
    Thank you for posting in Windows Server Forum.
    Do you need any other assistance?
    Based on your description, you are describing your story of successfully implementing RDS server with AD role and more regarding all RDS related scenario. For shadowing feature, you can use with command also. Below is the syntax to shadow a session.
    mstsc /v:<ServerName> /shadow:<SessionID>
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    TechNet Community Support

  • Remote Desktop (Terminal Services) Configuration on a Server Standard 2012, standalone installation

    I'm new to this, so bear with me..
    I need help locating documentation on how to configure a Server Standard 2012, standalone server, to act as a terminal server. In server 2008, you could have the server as a domain controller, and also host remote desktop sessions for thin clients. Apparently
    a lot has changed with 2012, and I don't think I'm even using the right search terms because I having a time finding proper information.
    I'll be glad to provide whatever further information is needed for someone to help me..
    Thanks in advance, and looking forward to gaining a better understanding of how this works. Don't mind doing the work, like I said, i just need some good documentation I can follow.

    Hi,
    Also here, the below articles should be helpful:
    Windows 8 / Windows Server 2012: Remote Desktop Management Server
    http://blogs.technet.com/b/askperf/archive/2012/10/30/windows-8-windows-server-2012-remote-desktop-management-server.aspx
    Windows Server 2012 Remote Desktop Services (RDS)
    http://blogs.technet.com/b/windowsserver/archive/2012/05/09/windows-server-2012-remote-desktop-services-rds.aspx
    Follow me and learn Windows Server 2012 – Remote Desktop Services
    http://blogs.technet.com/b/bruce_adamczak/archive/2012/10/27/follow-me-and-learn-windows-server-2012-remote-desktop-services.aspx
    Remote Desktop Services in Windows Server 2012 Test Lab
    http://social.technet.microsoft.com/wiki/contents/articles/12934.remote-desktop-services-in-windows-server-2012-test-lab.aspx
    Regards,
    Yan Li
    Cataleya Li
    TechNet Community Support

  • Adobe Acrobat X on Server 2003 (using remote desktop services)

    Hi guys,
    I need to purchase a copy of Adobe Acrobat for Windows Server 2003 for use in Microsoft Dynamics GP 2010, as well as everyday Acobat read/write tasks. There will be about 4 or 5 simultaneous users connecting to the server using RDP (via Windows Vista and 7).
    My question is, will a single copy of Adobe Acrobat X Standard suffice or work properly on Windows Server 2003 for all users?
    I can't seem to find any information on Adobe Acrobat X and terminal services (or Remote Desktop Services).
    Hope I've made sense, and any help will be appreciated
    Thanks
    -Rhydz

    Hi,
    What Word prompts when user attempts to login with the original account? Any error messages?
    Since the feature will work if you create a new account, have you ever compared the property of these two accounts? Maybe the security or permission setting during the creation process?
    We lack testing environment here for this kind of issues, and we have another dedicated support teams in
    Microsoft Office 365 Community. I would suggest you to post there, where you can get more experienced responses:
    http://community.office365.com/en-us/f/default.aspx
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
    Thanks,
    Ethan Hua CHN
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • Why is Remote Desktop running when I have it disabled?

    I am running Windows 7 Professional. Looking at the Event Viewer today, I examined Microsoft/Windows/Terminal Services/Local Session Manager/Operational. There are 1,959 events recorded, dating back to 7/30/2014. A typical entry--one from today, reads in
    the details: Remote Desktop Services: Session Logon Successful. User: PC\UserName Session ID:2. Source Network Address: LOCAL. The subsequent entry reads: Remote Desktop Services: Shell Start Notification Received. User: PC\UserName. Session ID:2. Source Network
    Address: LOCAL. There are also entries for Session Logoff Succeeded, Session Has Been Discontinued, and Session Has Been Reconnected. It appears that these entries have been recorded each time we log on, log off, and switch user. My question is: Why are these
    events being recorded under Terminal Services and Remote Desktop Services events? Under Services, I have disabled Remote Desktop Configuration, Remote Desktop Services, and Remote Desktop Services User Mode Port Redirector. In Control Panel/System, I have
    unchecked the box for "Allow Remote Assistance invitations to be sent from this computer."
    About a month ago, I discovered a strange new hardware installation of a PS/2 mouse and i8042 port in the Event Viewer. Consequently, under Hidden Devices in Device Manager, I did see the PS/2 mouse that I never installed.
    Yesterday, I ran netstat -anobv and it showed two ports listening on the network for which it said, "Cannot obtain ownership information." One was port 445, for which I have blocked incoming activity on the firewall. The other was port 5357,
    which according to Microsoft has some security vulnerabilities related to Function Discovery Provider Host and Function Discovery Resource Publication. Since this is a standalone PC with no network attached devices, I disabled both of these services. As of
    this morning, the PS/2 mouse has disappeared from Device Manager.
    A new process has popped up using netstat -anobv, on port 8883. It's IANA registered to MQTT. Should I be concerned about the Remote Desktop Services shown in Event Viewer? I thought it was a cause for concern, especially due to the appearance of the PS/2
    mouse and the i8042 port which I did not install. Thank you for your help with this issue. 

    Hi Tergivesada,
    You may upload the log files into OneDrive and paste the shared link here, we will help to check it out.
    For other considerations, some application might also take use of remote services to cause Windows record the logon events, which should be considered a normal behavior. Reference:
    Remote Desktop Services.
    For the security consideration, you may take use of Windows Security Essentials to help protect your machine:
    http://windows.microsoft.com/en-HK/windows/security-essentials-download
    And further questions, please feel free to post back.
    Best regards
    Michael Shao
    TechNet Community Support

  • Remote Desktop and Snow Leopard Server

    What is the best way to use Remote Desktop with Snow Leopard Server?
    I purchased a mac mini with snow leopard server and Remote desktop so I can easily manage my 11 computers, install and upgrade software etc. etc.
    The mac mini server will basically be nothing but a server.
    I will use as my main computer a mac pro. Do I need to install Remote Desktop on the server and on my mac pro? What is the best way to deploy the services of Remote desktop and mac os x server?

    You install Apple Remote Desktop on the machine you want to control from. In this case, install on your Mac Pro. All you have to do on the clients (controlled Macs) is enable remote management in the System Preferences under Sharing. Just make sure that all your controlled Macs are up to date on their ARD version (v3.3.2) which can be taken care of from Software Update.

  • Windows Server 2012 Used: Error Message from Windows 7 PC: Remote session was disconnected because there are no remote desktop license servers available to provide a license. Please contact the server administrator.

    We are using Windows Server 2012 Standard installed in VMWare / Virtual machine and to access this we use vSphere client and Remote Desktop Connection / service was already enabled and was working fine with User PCs / laptops remote desktop into the server
    2012, until it gave an error message of: Remote session was disconnected because there are no remote desktop license servers available to provide a license.  Please contact the server administrator. whilst logging into the server. 
    We DON'T use Active Directory nor and we don't use domain and not looking to use it any-time soon. 
    I checked the RD Licensing Diagnoser and it says the grace period has expired and the licensing mode for the remote desktop session host server is not configured.  I have checked the Remote Desktop Gateway has been stopped and I tried to start it and it
    resumed to stop, here I assume its where the licensing part comes in to re-enabled this. 
    I have been trying to follow these articles online: http://ryanmangansitblog.com/2013/03/27/deploying-remote-desktop-gateway-rds-2012/ and http://www.concurrency.com/blog/rds8-add-a-licensing-server-2/#Install  the overview part that I cannot get into,
    because I think we have to be is AD DS for this which we don't.  Is there a way around this for non domain / just standalone set-up?  Is it a must / requirement we need to be in a domain in order for Remote Desktop Connection to work? 
    Also, we have a Windows Server 2012 RDS CALs - 10 (software and licence key), will the licence key work for the Windows 2012 Server Standard?  We do not want to install the other Server mentioned which comes with CAL / licence key as its time consuming
    to reinstall other programs.  I have installed  Server role service of Remote Desktop Licencing and automatically installed other associated services needed.  in the RD Licencing Manager, the Server had a red cross and I "Activate Server"
    where I followed: http://www.concurrency.com/blog/rds8-add-a-licensing-server-2/#Install in Install Licences section and I have used the licence key of CAL - 10 mentioned above; it stated I have successfully completed the install licences wizard and displayed:
    10 Windows Server 2012 - RDS Per User CAL installed, and in the RD Licensing Manager the server turned into a green tick and added the licence.  
    I then tested the Remote desktop connection from my PC and the same error message was there and checked the RD Licensing Diagnoser and the same error messages was there.  I haven't restart the services of Remote Gateway / the server itself; do I really
    need to reboot server?  
    Any advice / guidance would be very much appreciated and this is a urgent matter.  
    Thank you for your time.

    Hotfix Released here:
    http://support.microsoft.com/kb/2916846

  • Using remote desktop web access (RDWEB) with remoteapps and a traditional remote desktop

    I configured windows 2012 r2 remote desktop services and remote desktop web access (rdweb) and was able to click the icon on the rdweb page to log on to a remote desktop session. When I published a remoteapp program, the remote desktop icon went away. How
    do I get it back? Do I need to publish remote desktop as a remoteapp so users can both use remote apps and log on to a traditional remote desktop session?
    thanks in advance for the help

    Hi,
    You can just publish RDC as RemoteApp and then can connect to the desired remote desktop connection. You can check the below snap.
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Is remote desktop assistance available in AppleCare Program?

    Hi
    Those days that I was using windows, if I had a problem that couldn't solve it, I just contacted a support company ( not related to Microsoft ) and they asked me to turn on Teamviewer and give them the password. An expert got into my system and made anything needed ( also they charged me for that !! ). I know that was a security risk , but for a lazy person like me it was a gift sent from God !
    Now I have turned into Mac and those guys say they can only give support for Windows.
    As I was really pleased by the convenience of that program, before buying the AppleCare I want to know if this service includes remote desktop assistance or not .
    Thanks

    No it doesn't. Youll need to look for a thrid party solution (again) if you want this.
    regards

  • PC To Mac With Remote Desktop

    Is there a program or will remote desktop work for me to install on my PC at home so i can remotely control my Mac Mini at work.

    But in order to use VNC, you have to set your Mac to allow it - System Preferences-->Sharing-->Services-->Apple Remote Desktop-->Access Priveleges... --> check mark "VNC viewers may control screen with password" and add a password.
    You may also need to have ports opened or forwarded in your router/firewall, but that is beyond the scope of this-- it depends on the setup you're using, and you're best off asking the Network Admin about that, or searching for VNC setup instructions with your particular firewall/router.

  • To install Remote Desktop Services User CAL on Windows Server 2008 R2 Enterprise Edition with SP1

    Dear Sir,
    Presently we have installed Windows Server 2008 R2 Enterprise Edition with SP 1. And now i would like to install Remote Desktop Services User CAL on this server. I have 25 digit product key of Windows Server
    2008 R2 Remote Desktop Services User CAL (20). Downloaded this product key from our MSDN Subscriptions.
    Kindly suggest me how to install (CAL server with product key that i have) and configure remote desktop services on my above existing server also how to point other server with my CAL server.
    Thanks

    Hi,
    1. Install Remote Desktop Session Host and Remote Desktop Licensing Role Services using Server Manager.
    2. Open RD Licensing Manager (licmgr.exe), Activate your server, then install your license
    3. In RD Session Host Configuration (tsconfig.msc), set the Licensing mode to Per User and Specify your RD Licensing server name (itself).  If you want you may configure these two settings via group policy setting instead.  The path of the
    group policy settings is Computer Configuration\ Administrative Templates\ Windows Components\ Remote Desktop Services\ Remote Desktop Session Host\ Licensing
    4. You may point other RDSH servers to your RD Licensing server using RD Session Host Configuration or via group policy as mentioned above.
    5. Optionally you may consider installing other Remote Desktop Role Services such as RD Gateway, RD Web Access, RD Connection Broker, etc.
    -TP

  • How to install the Remote Desktop Services role on a Windows 2012 R2 Server

    Hello,
    I am a bit confused on how to install the RDP role on a 2012 R2 server. I have a two server domain and would like to make the second member server an RDP server to host applications (Word, Excel, a medical software, etc.) where users from their windows
    7 desktop will use the Remote Desktop Connection to connect to the server, create a session and do their work. When installing the role, I am prompted with two options:
    1- Role-based or feature based installation
    2- Remote Desktop services installation
    I see the RDP install option in both cases.
    1- Which one do I use?
    2- What role services do I install? (Connection broker, Gateway, Licensing, Session Host, Virtualization host and Web access). I think I need the first four only.
    3- When installing software after RDP, I use the Change user /install and Change user /execute commands. What happens to the software that is already installed? Can remote
    users use those?
    Any help will be very much appreciated.
    Thank You,
    Victor.

    TP,
    Thank you for your response. I added the RD Licensing thru the Role-based option.
    Also opened the local group policy thru gpedit.msc and added the server name and the licensing mode type to Computer Configuration -> Administrative Templates -> Windows Components -> Remote Desktop Services -> Remote Desktop Session
    Host -> Licensing
    Use the specified RD license servers = NameOfMyServer
    Set the Remote Desktop licensing mode = TypeOfMyLicense (Per User in my case)
    Thank you again,
    Victor

  • Remote Desktop Services Role on a Virtual Machine (VM) Requirements

    Does MS recommend installing RDS Role on Hardware or Virtual Machine? I have a use case where I have about 35 people that will be using the Internet Explorer and possibly run additional piece of software. I'm having trouble determining if the RDS Role on
    Virtual Machine will be able to sustain the load of so many users. Should the same performance metric used in hardware selection be appropriate to apply for Virtual Machines. We are using VMware on pretty powerful DELL hardware, which is also hosting
    120 existing VMs as of now. So my questions is would VM with 4 CPU's, 8GB of RAM, 80 GB Virtual Disk and 1 GBPs NIC would be handle the job?

    Hi,
    Thank you for posting in Windows Server Forum.
    There is no any particular requirement to run RDS on physical or virtual machine. But if you want to install RD Virtulization role then you need to see that Hyper- V role installed because “when the RD Virtualization Host role service is installed, Server
    Manager checks to see if Hyper-V is installed. If Hyper-V is not installed, Server Manager will install it”. And Hyper-V role cannot be installed on virtual machine so for that you need to install on Physical machine. Other all RDS role can be installed
    on virtual machine also.
    Install the Remote Desktop Virtualization Host Role Service
    In addition, please check below articles.
    1. Remote Desktop Services: Server and client requirements
    2. RDS Hardware Sizing and Capacity Planning Guidance.
    Hope it helps!
    Thanks,
    Dharmesh

  • Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer

     Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer, And when Installing network printers from the domain controller it reports it cannot connect to printer.  I can ping all
    network devices. I can connect to the internet.
    On boot I get a netlogon 5719 error followed by service control manager errors 7023,7001 and a group policy error 1129.
    Clients can connect to the remote application and RDP operates to connect to the server internally and externally.
    The domain controller is another server 2008r2 box. I have scoured the internet but have not found any solutions that work yet.

    Hi,
    After referring to your post, it can be identified that the issue which you are facing is mostly due to some network issue in your environment. Please recheck your network connection issue between computer and domain controller. 
    Can you able to ping with IP address and also with fully qualified name of a domain controller in the users' and computers' domain. If it fails states that name resolution issue with computer and domain controller. Are you using MS DHCP Relay agent then there’s
    available Hotfix for the particular Event ID. Please go through this KB 2459530 to fix the error event ID.
    As per the net logon error 5719 which you are facing states that the client component of Netlogon was unable to locate a DC for the domain it was trying to perform an operation against. Below is one of the reason. If this is being logged on a DC and the event
    refers to the DC's own domain, something might be preventing the client component of Netlogon from starting a network session (to itself or to another DC in the domain). The following event 7001 & 7023 states start & stop operation service. Please
    go through beneath article for more details.
    1.  Event ID 5719 is logged when you start a computer
    2.  Netlogon 5719 and the Disappearing Domain [Controller]
    3.  Event ID 1129 — Microsoft-Windows-GroupPolicy
    Hope it helps!
    Regards.

  • Cannot run more than one instance of a remote app in remote desktop services Server 2012

    All,
    I installed "Remote Desktop Services (RDS) Quick Start Deployment for RemoteApp, Windows Server 2012 Style" using the instructions here http://blogs.technet.com/b/yungchou/archive/2013/02/07/remote-desktop-services-rds-quick-start-deployment-for-remoteapp-windows-server-2012-style.aspx
    I need to set up an image viewing program (Olyvia) to allow students using Macs and iPads access to this windows only application in order for them to get their work done.  We may have 12 or more students accessing and trying to run the Olyvia application
    at any one time.
    All works good, except that I cannot run the Olyvia application (setup as a remoteapp program) more than one instance at a time.  That is, when I start up "olyvia" on a Mac, it works great.  If I leave it up and running, and then try
    and start up "olyvia" on an iPad (using different accounts), I get the following error message:
    "Cannot run more than one instance of this program simultaneously.  Either the program is already running, or it has not been terminated completely."
    I need to understand the root issue.
    1.  Is this a licensing issue?  So, I need to add some CALs to the RDS server?
    2.  Is this a application issue with "olyvia"?  So, no matter what I do, it is not going to be able to be used by more than one person at a time when configured as a remoteapp?
    3.  Did I not "publish" the application correctly?
    4.  Is this happening because I followed the "quick start" guide?
    Appreciate any help I can get on this.  We have no problem getting CALs, I just need some help with the root issue.
    Thanks,
    Geoff Weatherford
    CVMBS, CSU

    Hi Geoff,
    Each application uses different techniques for determining if multiple instances are running.  If you can determine what method it is using then perhaps you could use App-V or other virtualization software.
    In the best case you really should direct your question to the maker of Olyvia.  The reason I said that is they specifically designed their software to prevent multiple instances, so the first question is, why?  Is it related to Licensing? 
    Compatibility?  If you knew the specific reason(s) why they are doing it and the technique used then at the point using a virtualization technique may be the best option.
    -TP

  • How do I remote control a user in remote desktop services in Windows Server 2012?

    Hello,
    we currently operate in a 2008 R2 environment with the majority of clients connecting to our terminal servers.  We use the remote control feature in terminal services manager to connect to a users session when a user phones our helpdesk with
    a question / issue.
    Just today I've installed 2012 server on a hyper-v virtual machine to have a play with it.  I've installed the Remote Desktop Services and noticed this remote control feature is gone.  I can still log off or send a message to a user, but I can
    no longer remote control their session.
    I've seen one or two other posts stating this feature has been removed completely.
    So, a couple of questions:
    1. How on earth do I "shadow" or connect to a users session now?
    2. If I have to go third party to get this functionality back, what's the best software on the market for this and does it support remote connecting of users who have their RDP session span multiple monitors? (2008 R2 doesn't)
    3. Will Microsoft ever bring this feature back? as at this stage I doubt we would move to 2012.  This is the one feature that is crucial to the day-to-day running of our helpdesk.
    Cheers.

    A large percentage of our IT support business is through remote management. Most of our large enterprise customers are Terminal Server environment (now called Remote Desktop - why does Microsoft have to change EVERYTHING - how would they feel if I changed
    the colour of the sky from blue to red just because I could?).
    Last week, after much expense to the customer (and realising that there WOULD be some cosmetic headaches to contend with Server Management) we installed a new "Remote Desktop Server" for them and shifting them from 2003 - a big leap so we discovered.
    During deployment it came as a HORRIFIC surprise that we could not remote control user's sessions!
    Yes, we ARE to blame for not fully realising the cock-up Microsoft has made for us. We should have fully researched every detail of what changes they made and what they have robbed us of.
    Firstly, the removal of the ability to fully manage user's sessions came as a HUGE blow!
    The remaining multiple issues that followed (including the hugely cumbersome and SLOW way of accessing user's sessions and the false information that the console was reporting users logged in when they had already logged out) suddenly resulted in us decommissioning
    the new 2012 installation in favour of a 2008 R2 installation.
    Some may ask; Why not use "Third Party" apps to counteract the issue? Firstly; why spend MORE and why use a third party app that "is as" cumbersome to use just because of a freaking feature that Microsoft deemed a "security risk" - for G.D sake!
    We have now been directed by management to convince customers that a move to 2012 is NOT recommended - good choice boss, I love you!
    The question is; will Microsoft re-implement this feature and fix Server Management performance/accessibility in a future release before 2008 R2 is no longer available? Probably not - it looks like their stubbornness to forge ahead with their craze mind-set
    of transforming their products into something that is now annoying millions (including their bloody push towards everything-cloud which NONE of our customers want anything to do with).
    Microsoft! Get us back on to your side and take a step back, take a deep breath and listen to consumers!

Maybe you are looking for