RDLC report fails to build simple expression

Hi,
I have a very curious case. I've just downloaded a solution in VS2010 SP1. Everything builds fine except a single RDLC report which fails with a cryptic error:
Error 17 An unexpected error occurred while compiling expressions. Native compiler return value: ‘-1073741515’.
Looking at report definition I deleted all report items except a textbox with below definition
<TextRuns>
<TextRun>
<Value>=Parameters!ReportTitle.Value</Value>
<Style>
<FontSize>16pt</FontSize>
<FontWeight>Bold</FontWeight>
<Color>Navy</Color>
</Style>
</TextRun>
</TextRuns>
If I simply replace "=Parameters!ReportTitle.Value" for "abc" the project builds fine.
The mentioned parameter has a default value.
Any clue why my VS2010 Ultimate SP1 doesn't like to build this simple expression, other devs can build it fine.
Thanks,
Lucas

Hi HGG42,
Per my understanding that you got the error about using this expression "=Parameters!ReportTitle.Value" in the Textbox when creating the RDLC report, right?
As you have mentioned that that the parameter have a default value, i would like to know if you have check "Allow Multiple values", if you have check this, you will got some errors, you can uncheck this or you can modify the expression in the textbox
as:" =join(Parameters!ReportTitle.Value,",") "
If you haven't check the "Allow Multiple values", the issue can be caused by uthentication problem, please check your application's (if ASP) UserName and Password provided in your service.
Similar thread below for your reference:
http://www.c-sharpcorner.com/forums/thread/234749/rdlc-unexpected-error-occurred-while-compiling-expression.aspx
http://forums.asp.net/t/1923313.aspx?Native+compiler+error+1073741502+
If you still have any problem, please feel free to ask.
Regards
Vicky Liu

Similar Messages

Deploying Crystal Reports with IIS - Load Report Failed

Post Author: jeremyrarextreme
CA Forum: Deployment
Hi
We have installed Crystal Reports Developer XI release 2 with Visual Studio 2005 to implement a very simple app that allows a crystal report to be loaded via the web. This works perfectly fine when I publish my build from Visual Studio 2005 (using the built in cystal controls) and go view in browser.
Everything looks fine when I run the app from Visual Studio by clicking view in browser - the crystal report loads and everything is how it should be.
When I publish the build on our production server (a Windows 2003 server running IIS6) I get the error: Load Report Failed
A full detailing of this error can be found on this forum post: http://aspadvice.com/blogs/rjdudley/archive/2005/05/18/2591.aspx
where many other people are having the same issue.
I have struggled for a very long time to find a solution to this, how do I resolve this issue?
when I try to view the .net 2.0 project from a browser running through IIS It displays the business objects toolbar but returns the error: Load Report Failed
When I run this in my development environment directly from Visual Studio 2005 it works perfectly fine and loads the report.
The report path is perfectly fine and correct, we have permissions on all folders for read, write and execute for both general user / admin accounts and IIS accounts on the Windows 2003 Server.
We also have full permissions on c:/temp and c:/windows/temp
What else can I do to make this work!
Many thanks and awaiting your reply

Post Author: mikeeby
CA Forum: Deployment
Yes I too have been fighting this problem. I was using a XML Data file and schema file for my u201Cdatabase templateu201D in the report. I would then run my query using the .NET SQLClient then fill the report with my dataset table using the SetDataSource method from the ReportDocument object.
I tried both embedded and runtime loaded reports all worked fine on my development machine but would NOT work on my production server. I use all the server installs, played with user rights, registering DLLu2019s still nothing. I went as far as creating a winform app to fix the problem. I then had exactly the same problem, I was catching the error and it originated from the viewer control in both winform and webforms.
What finally worked for me was to attach to the database using OLE DB instead of XML/schema (xml/xsd) datasource then pasting my SQL Query into the database connection command this gave me the fields to build the report. I actually used the u201CSet Database Locationu201D Dialog in Crystal Reports so I didnu2019t have to redesign my report. This dialog works very weird but I managed to figure it out. I then used an embedded report and all seem to be well. I think there is a problem with the Crystal Reports .NET Server Install and Merge Modules used with .NET with XML files, but I cannot be sure, all I know is this worked for me.
I am concerned that if my database server is moved or renamed my report might break because the server connection is embedded in the report, but for right now it is working. I thought that was the reason for using the xsd file was to eliminate the dependence on a server connection in the report.
Good luck and I hope this helps you fix your problem too. If it does please let me know I have see so many reports of people asking questions about this problem and it seems like most are left hanging.
Mike

Crystal Reports with VS2005 - Load Report failed Error....

Post Author: rajeshvijayan
CA Forum: Older Products
Hi,
I am running Crystal Reports viewer on IIS6.0 and windows server 2003, which was installed using the redistributable package that comes along with Visual Studio 2005. We open these reports through a web based application 1 which is run on a different application pool on IIS. We have about 3 to 4 other web applications runing on the same IIS. All the other Web applications are working fine.
This web application 1 has 2 parts - one is the normal data display quiries from the back end SQL server 2005 and the other is the Crystal Reports which also quires data from SQL Server 2005. At times i find that these reports all of them throw an error - Load Report Failed. At the same time the Part 1 of this application does work fine in showing the data that is queried from the database. Moreover at this stage, I dont find any errors in the Event viewer. If i restart this application pool alone, the reports starts working fine again.
I had gone through a few of the news groups and have made all the necessary permission related changes like the TEMP Folder, ASP.NET temporary folder, the folder in which the crystal reports is placed etc but still the same error throws up after some point in time. Wanted to know if there is any special configuration required on the Application pool when it comes to Crystal Reports. We have bout 10 to 15 users using this application for testing and it only throws this error at times and not always.
Looking forward to any kind of solution from your side.
Regards
Rajesh

Post Author: mikeeby
CA Forum: Deployment
Yes I too have been fighting this problem. I was using a XML Data file and schema file for my u201Cdatabase templateu201D in the report. I would then run my query using the .NET SQLClient then fill the report with my dataset table using the SetDataSource method from the ReportDocument object.
I tried both embedded and runtime loaded reports all worked fine on my development machine but would NOT work on my production server. I use all the server installs, played with user rights, registering DLLu2019s still nothing. I went as far as creating a winform app to fix the problem. I then had exactly the same problem, I was catching the error and it originated from the viewer control in both winform and webforms.
What finally worked for me was to attach to the database using OLE DB instead of XML/schema (xml/xsd) datasource then pasting my SQL Query into the database connection command this gave me the fields to build the report. I actually used the u201CSet Database Locationu201D Dialog in Crystal Reports so I didnu2019t have to redesign my report. This dialog works very weird but I managed to figure it out. I then used an embedded report and all seem to be well. I think there is a problem with the Crystal Reports .NET Server Install and Merge Modules used with .NET with XML files, but I cannot be sure, all I know is this worked for me.
I am concerned that if my database server is moved or renamed my report might break because the server connection is embedded in the report, but for right now it is working. I thought that was the reason for using the xsd file was to eliminate the dependence on a server connection in the report.
Good luck and I hope this helps you fix your problem too. If it does please let me know I have see so many reports of people asking questions about this problem and it seems like most are left hanging.
Mike

Scheuled report failing intermittently With Permission Error

Hello,
A scheduled custom report fails some days. The user has permission to both run and schedule the report. There is no problem to view the reports neither to set up the schedule. And the schedule often runs ok, just every now and then it fails with following error.
errdetail=oracle.apps.xdo.servlet.scheduler.ProcessingException\: Job execution failed because the user who scheduled this job has no more permission or priviledge to run the job. [REPORT_URL]\=[/*********.xdo], [USERNAME]\=[USERNAME]\r\n\********(XDOJob.java\:356)\r\n\tat org.quartz.core.JobRunShell.run(JobRunShell.java\:195)\r\n\tat org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java\:520)\r\nI saw a related document in metalink [ID 1330421.1] but it mentions about sharing the scheduler bertween two instances which I am not sure what that means. I have also checked following forum but for that user the failuer is permanent unlike in our case where its random.
Schedule problems
We are currently on;
Standalone Oracle BI Publisher 10.1.3.4
Windows 2003
Using LDAP (MS Active Directory) as a Security Model
Thanks for your help.

After we restarted the services, the issue went away. (very strange)

Reports fail when run against a different data source

Hello,
We have a VB.NET 2008 WinForms application running on Microsoft .NET 3.5. We are using Crystal Reports 2008 runtime, service pack 3 -- using the CrystalDecisions.Windows.Forms.CrystalReportViewer in the app to view reports. In the GAC on all our client computers, we have versions 12.0.1100.0 and 12.0.2000.0 of CrystalDecisions.CrystalReports.Engine, CrystalDecisions.Shared, and CrystalDecisions.Windows.Forms.
Please refer to another one of our posted forum issues, u201CCritical issue since upgrading from CR9 to CR2008u201D, as these issues seem to be related:
Critical issue since upgrading from CR9 to CR2008
We were concerned with report display slow down, and we seemed to have solved this by using the Oracle Server driver (instead of either Microsoft's or Oracle's OLEDB driver). But now we must find a resolution to another piece of the puzzle, which is: why does a report break if one data source is embedded in the .rpt file is different than the one you are trying to run the report against, in the .NET Viewer?
Problem:
If you have a production database name (e.g. "ProdDB") embedded in your .rpt file that you built your report from and try to run that report against a development database (e.g. "DevDB") (OR VICE VERSA -- it is the switch that is the important concept here), the report fails with a list of messages such as this:
    Failed to retrieve data from the database
    Details: [Database vendor code: 6550 ]
This only seems to happen if the source of the report data (i.e. the underlying query) is an Oracle stored procedure or a Crystal Reports SQL Command -- the reports run fine against all data sources if the source is a table or a view). In trying different things to troubleshoot this, including adding a ReportDocument.VerifyDatabase() call after setting the connection information, the Crystal Reports viewer will spit out other nonsensical errers regarding being unable to find certain fields (e.g. "The field name is not known), or not able to find the table (even though the source data should be coming from an Oracle stored procedure, not a table).
When the reports are run in the Crystal Reports Designer, they run fine no matter what database is being used; but the problem only happens while being run in the .NET viewer. It's almost as if something internally isn't getting fully "set" to the new data source, or something -- we're really grasping at straws here.
For the sake of completeness of information, here is how we're setting the connection information
        '-- Set database connection info for the main report
        For Each oConnectionInfo In oCrystalReport.DataSourceConnections
            oConnectionInfo.SetConnection(gsDBDataSource, "", gsDBUserID, gsDBPassword)
        Next oConnectionInfo
        '-- Set database connection info for each subreport
        For Each oSubreport In oCrystalReport.Subreports
            For Each oConnectionInfo In oSubreport.DataSourceConnections
                oConnectionInfo.SetConnection(gsDBDataSource, "", gsDBUserID, gsDBPassword)
            Next oConnectionInfo
        Next oSubreport
... but in troubleshooting, we've even tried an "overkill" approach and added this code as well:
        '-- Set database connection info for each table in the main report
        For Each oTable In oCrystalReport.Database.Tables
            With oTable.LogOnInfo.ConnectionInfo
                .ServerName = gsDBDataSource
                .UserID = gsDBUserID
                .Password = gsDBPassword
                For Each oPair In .LogonProperties
                    If UCase(CStr(oPair.Name)) = "DATA SOURCE" Then
                        oPair.Value = gsDBDataSource
                        Exit For
                    End If
                Next oPair
            End With
            oTable.ApplyLogOnInfo(oTable.LogOnInfo)
        Next oTable
        '-- Set database connection info for each table in each subreport
        For Each oSubreport In oCrystalReport.Subreports
            For Each oTable In oSubreport.Database.Tables
                With oTable.LogOnInfo.ConnectionInfo
                    .ServerName = gsDBDataSource
                    .UserID = gsDBUserID
                    .Password = gsDBPassword
                    For Each oPair In .LogonProperties
                        If UCase(CStr(oPair.Name)) = "DATA SOURCE" Then
                            oPair.Value = gsDBDataSource
                            Exit For
                        End If
                    Next oPair
                End With
                oTable.ApplyLogOnInfo(oTable.LogOnInfo)
            Next oTable
        Next oSubreport
... alas, it makes no difference. If we run the report against a database that is different than the one specified with "Set Datasource Location" in Crystal, it fails with nonsense errors

Thanks for the reply, Ludek. We have made some breakthroughs, uncovered some Crystal bugs and workarounds, and we're probably 90% there I hope.
For your first point, unfortunately the information on the Oracle 6550 error was generic, and not much help in our case. And for your second point, the errors didn't have anything to do with subreports at that time -- the error would manifest itself even in a simple, one-level report.
However, your third point (pointing us to KB 1553921) helped move us forward quite a bit more. For the benefit of all, here is a link to that KB article:
Link: [KB 1553921|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533353333333933323331%7D.do]
We downloaded the tool referenced there, and pointed it at a couple of our reports. The bottom line is that the code it generated uses a completely new area of the Crystal Reports .NET API which we had not used before -- in the CrystalDecisions.ReportAppServer namespace. Using code based on what that RasConnectionInfo tool generated, we were able gain greater visibility into some of the objects in the API and to uncover what I think qualifies as a genuine bug in Crystal Reports.
The CrystalDecisions.ReportAppServer.DataDefModel.ISCRTable class exposes a property called QualifiedName, something that isn't exposed by the more commonly-used CrystalDecisions.CrystalReports.Engine.Table class. When changing the data source with our old code referenced above (CrystalDecisions.Shared.ConnectionInfo.SetConnection), I saw that Crystal would actually change the Table.QualifiedName from something like "SCHEMAOWNER.PACKAGENAME.PROCNAME" to just "PROCNAME" (essentially stripping off the schema and package name). Bad, Crystal... VERY BAD! IMHO, Crystal potentially deserves to be swatted on the a** with the proverbial rolled-up newspaper.
I believe this explains why we were also able to generate errors indicating that field names or tables were not found -- because Crystal had gone and changed the QualifiedName to remove some key info identifying the database object! So, knowing this and using the code generated by the RasConnectionInfo tool, we were able to work around this bug with code that worked for most of our reports ("most" is the key word here -- more on that in a bit).
So, first of all, I'll post our new code. Here is the main area where we loop through all of the tables in the report and subreports:
'-- Replace each table in the main report with new connection info
For Each oTable In oCrystalReport.ReportClientDocument.DatabaseController.Database.Tables
    oNewTable = oTable.Clone()
    oNewTable.ConnectionInfo = GetNewConnectionInfo(oTable)
    oCrystalReport.ReportClientDocument.DatabaseController.SetTableLocation(oTable, oNewTable)
Next oTable
'-- Replace each table in any subreports with new connection info
For iLoop = 0 To oCrystalReport.Subreports.Count - 1
    sSubreportName = oCrystalReport.Subreports(iLoop).Name
    For Each oTable In oCrystalReport.ReportClientDocument.SubreportController.GetSubreportDatabase(sSubreportName).Tables
        oNewTable = oTable.Clone()
        oNewTable.ConnectionInfo = GetNewConnectionInfo(oTable)
        oCrystalReport.ReportClientDocument.SubreportController.SetTableLocation(sSubreportName, oTable, oNewTable)
    Next oTable
Next iLoop
'-- Call VerifyDatabase() to ensure that the tables update properly
oCrystalReport.VerifyDatabase()
(Thanks to Colin Stynes for his post in the following thread, which describes how to handle the subreports):
Setting subreport connection info at runtime
There seems to be a limitation on the number of characters in a post on this forum (before all formatting gets lost), so please see my next post for the rest....

Scheduled Report Failing - Don't Know Why

I'm trying to re-create a scheduled report on CMC that had gotten deleted. It ran before (sometimes multiple times...) but at least it ran. I'm duplicating all the settings for this report based on how they were before, but every time I try to get the report to run, it fails.
I don't know enough about this to be able to embed any kind of error messages in the e-mail notifications we get. All I know is that no matter what I change/tweak/adjust, we get an email saying "This report has failed to run."
What kinds of things should I be looking at to troubleshoot? I know the report itself is fine, as users can view it normally (as in, through other viewers). There's definitely something specific to the scheduling process that is not correct, but I don't know what to look at.
Here is how the scheduling is currently configured:
Schedule > Main Tab
-Run Weekly, Tues - Sat
-Start Date: 10/01/08, 8:30 AM (I originally set this up yesterday, so today at 8:30 should have been the first time it ran, but instead it failed)
-End Date: 10/01/18, 12:00 AM
-Number of retries allowed: 0
-Retry interval in seconds: 1800
Schedule > Notification
-Email notification based on: a job has failed to run
-Message: Report failed to run. Scheduled Report: %SI_NAME% - %SI_STARTTIME% What other codes can we put in this message, BTW? I've been trying to look for something to return error codes, but %SI_OUTCOME%, %SI_STATUSINFO%, and %SI_ALERT_MESSAGE% don't display anything, they just print on the email
Schedule > Destination
-Destination: Email (SMTP)
-Clean up instance after scheduling is checked
-We have "Set the values to be used at schedule time here:" populated with our list of email addresses for recipients
-Attach object instance to email message is checked
-Specified file name: %SI_NAME%%SI_STARTTIME%.%EXT%
-Add extension is checked
Schedule > Format
-Format: Microsoft Excel (Still fails if we choose Excel Data Only or Adobe Acrobat)
-Use options saved with report is checked (Still fails if we deselect this)
Schedule > Schedule For
-Schedule only for myself.
Could really use some help here, as I don't know what in the world could be causing this to fail. Thanks in advance.

First thing is to forget all the complex configs and just try to schedule the report to run once now, no alerts, no notifications, no nothing.
Does that work?
Then you can build up the schedule, to see where the problem is coming from.
Sincerely,
Ted Ueda

Load Report Failed - Report Application Server Failed error at runtime

Hello, I'm pretty new to Crystal Reports so please bear with me.
I just installed CR 2008 on my development box, which is running VS2005 .NET 2.0. I changed over all of my assembly references in my web.config to the new version:
<add assembly="CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.Shared, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.ReportSource, Version=12.0.2000.0, Culture=neutral,
PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.Enterprise.Framework, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.Enterprise.Desktop.Report, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.ReportAppServer.Controllers, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.CrystalReports.Engine, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.Enterprise.InfoStore, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.Enterprise.Viewing.ReportSource, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
Also the webpage that is displaying the ReportViewer object has this reference as well:
<%@ Register Assembly="CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"
    Namespace="CrystalDecisions.Web" TagPrefix="CR" %>
Now, in my code behind I am simply trying to open a pre-built crystal report that came in the sample pack
When I try and do this in our already built website I get an error:
"Load report failed"
With the inner exception saying:
"The Report Application Server failed"
This same piece of code works perfectly if I build a new website, however when I try and impliment this into our existing code base I get the error shown above. Also the samples I've used all use .NET 3.5 and the website is in 2.0. I'm not sure if that is a factor or not but that is also another piece of information that could be useful.
Any help on this matter would be greatly appreciated. Thank you for you're time.
Chris McMahan
Edited by: Arithal on Aug 4, 2009 8:36 PM

And finally the stack trace. Sorry for the length of these posts.
[COMException (0x800001f5): The Report Application Server failed]
   CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) +0
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) +126
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +575
[CrystalReportsException: Load report failed.]
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +646
   CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) +1374
   CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename) +169
   Report_Viewer_Crystal_CrystalView.ConfigureCrystalReports() in c:\Inetpub\wwwroot\Report Viewer\Crystal\CrystalView.aspx.cs:49
   Report_Viewer_Crystal_CrystalView.Page_Init(Object sender, EventArgs e) in c:\Inetpub\wwwroot\Report Viewer\Crystal\CrystalView.aspx.cs:33
   System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +15
   System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +33
   System.Web.UI.Control.OnInit(EventArgs e) +99
   System.Web.UI.Page.OnInit(EventArgs e) +9
   System.Web.UI.Control.InitRecursive(Control namingContainer) +321
   System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +834

Urgent help needed in building an expression

hi,
I am using expression editor to build the following simple expression.
"if inputvalue = 0 then 10 else 20"
so Far I have used various forms of "IF" and "CASE" statements but could not successfully create the expression.Could not find anything useful in the help docs as well.
any help asap would be highly appreciated..highly disappointed with OWB which does not allow to build such a simple expression and the user docs as well are very poor.

Hi,
There is something you need to know up front on expressions and transformations. Expressions are SQL expressions, whereas transformations are pl/sql.
Looking at your pseudo code, you are trying to do a procedural thing. So there are 2 ways of doing this. One is correctly the case statement. For an example on how to do this go to the OWB sample code page on OTN (http://otn.oracle.com/sample_code/products/warehouse/content.html) where an explanation is given on how to do this. It includes an example metadata file for you to evaluate.
The other way of doing this is in PL/SQL, in which case you would create a small function accepting in parameter and then doing the procedural language on that. To create this use the create functions activity in OWB. Here you will get a nice code editor (similar to the expression builder) to guide you in the creation of this function.
Hope this helps,
Jean-Pierre

Reports Failing(Stack Overflow Error) - very urgent

Hi,
I try to run a report on the command line or using reports runtime engine or reports builder in win2000 and i keep on getting this error:
The exception unknown software exception(0xc00000fd STACK OVER FLOW ERROR)occurred in the application at location 0x008c7781.
The report runs fine in other formats(i.e pdf,html,htmlstyle sheet) and preview mode .When i selected delimited format, report fails at the time of writing in to text or excel format .
Please advice me .
Thanks in advance.

Hi,
Try with new desformat delimiteddata which is available with Report 6i patch 11/Reports 9i Patch 1
Thanks
Oracle Reports Team

Activity report failed(Communication error)- while check-in Activity

Hello SDN,
I am getting following error while Checking in activity from open activities .currently we are using NWDS7.3
CHECKIN      Finished24s.9Files scuceeded.
ACTIVATE     Activation Performed.Build request ID : 166
          Internal Problem(Activity report failed(Communication error
[cause: Unalble to open connection to host<host>:<port>][reason:Address already in use : connect]]))
Check-in completed successfully but Activation is not completed and giving connectivity error described above. Again
I activated activity from Activation view. Still I am getting following error description.Plesae provide me solution
to resolve this issue.
GET_STATUS      could not retrieve activation status of request '166' (Unable to connect to
host:port-Address already in use:connect(Service call exception; nested exception java.io.
IOException: Unable to connect to host:port-Address already in use:connect))
regards,
Sree.

Just check the full hostname of your DTR server, should be like
hostname.company.com
and check if somewhere only
hostname
is being used.and both are getting successfully pinged. DO not try the NWDS ping. Use command prompt and
ping hostname
and
ping hostname.company.com
Also this happens due to some clash with some other developer. Please check after some time, may be after a desktop restart. things should start working.
Edited by: Varun Biswas on Nov 29, 2011 11:53 PM
Edited by: Varun Biswas on Nov 29, 2011 11:53 PM

Failed to build StructureDefinition for - POJO Datacontrol

Hi
I found a message - "<BeanHandler> <getStructure> Failed to build StructureDefinition for : oracle.****.***.model.services.HomeService" in weblogic server log, while the pages renders completely, i did not define any action / actionlistener though.
The HomeService is simple POJO data control:
-------------------------------------HomeService.java-----------------------------------
package oracle.****.***.model.services;
import oracle.****.***.model.bean.HomeSearchParams;
public class HomeService {
private HomeSearchParams homeSearchParams = new HomeSearchParams();
public HomeService() {
public HomeSearchParams getHomeSearchParams() {
return homeSearchParams;
--------------------------DataControls.dcx---------------------------------------
<AdapterDataControl id="HomeService" FactoryClass="oracle.adf.model.adapter.DataControlFactoryImpl"
ImplDef="oracle.adf.model.adapter.bean.BeanDCDefinition" SupportsTransactions="false"
SupportsSortCollection="true" SupportsResetState="false" SupportsRangesize="false"
SupportsFindMode="false" SupportsUpdates="true"
Definition="oracle.****.***.model.services.HomeService"
BeanClass="oracle.****.***.model.services.HomeService"
xmlns="http://xmlns.oracle.com/adfm/datacontrol">
<CreatableTypes>
<TypeInfo FullName="oracle.****.***.model.bean.HomeSearchParams"/>
<TypeInfo FullName="oracle.****.***.model.services.HomeService"/>
</CreatableTypes>
<Source>
<bean-definition BeanClass="oracle.****.***.model.services.RdcHomeService"
xmlns="http://xmlns.oracle.com/adfm/adapter/bean"/>
</Source>
</AdapterDataControl>
--------------------------DataBindings.cpx---------------------------------------
<dataControlUsages>
<dc id="RdcHomeService" path="oracle/****/*****/model/services.RdcHomeService"/>
</dataControlUsages>
I wonder if there could be any issue here.
Can anybody advice here..
Thanks in advance,
Mayil
Edited by: user10254453 on Oct 21, 2011 12:08 AM

Hi,
does the application run fine ? If so then I don't see why you should worry about this
Frank

Oracle Report Failing After Database Version Upgrade

Hi,
I have function code created in RDF file of oracle reports 10g as below-
create or replace function clobblobtest (TMP_MID varchar2) return varchar is
missed_text varchar2(1000) := '';
v_time_stamp date;
v_end_time date;
cursor c1(c_time_stamp in date,
          c_mid in varchar2) is
       select mn.TEXT from msgnotes mn
where mn.mid=c_mid
      and mn.create_date >= c_time_stamp;
cursor c2(c_time_stamp in date,
          c_mid in varchar2,
          c_end_time in date) is
       select mn.TEXT from msgnotes mn
where mn.mid=c_mid
      and mn.create_date >= c_time_stamp
      and mn.create_date <= c_end_time;
begin
IF ('1' = 'INWARD RETURN') then
    select bbi into missed_text from mtf1000 where mid=TMP_mid;
    ELSIF '1'='QPH Missed' then
Select max(nj.update_date) into v_time_stamp
from newjournal nj
where nj.mid=TMP_mid and nj.status = 'CTOVRQ';
for i in c1(v_time_stamp,TMP_mid) loop
missed_text:=missed_text||' '||i.text;
END Loop;
ELSIF ('Rejected'='Rejected' OR 'REJECTED'='REJECTED') then
IF ('TERMINATED' in ('TERMINATED')) THEN
Select min(nj.update_date),max(nj.ENDDATE) into v_time_stamp,v_end_time
from newjournal nj
where nj.mid=TMP_mid and nj.actionid2='16' and nj.actionid1 is null;
for i in c2(v_time_stamp,TMP_mid,v_end_time) loop
missed_text:=missed_text||' '||i.text;
END Loop;
ELSE
Select max(nj.update_date) into v_time_stamp
from newjournal nj
where nj.mid=TMP_mid and nj.status = 'UNSETLED';
for i in c1(v_time_stamp,TMP_mid) loop
missed_text:=missed_text||' '||i.text;
END Loop;
END IF;
ELSE missed_text := null;
END IF;
return(missed_text);
End;
Note:- Text column from table msgnotes is of datatype CLOB.
I have executed report having this function before oracle upgrade and it works fine.
But when i am trying to execute report after oracle version upgrade from 11.2.0.3.0 to 11.2.0.4.0 with same data report fails with runtime error Rep-1401: '' Fatal PL/SQL Error.
With New version we tried to typecast Text column from clob to varchar and executed report then it works... but report runs on old version without any explicit typecasting.
Please note when i run and call this funtion from sql developer with upgraded database version it works fine.
Please advise.

This error can possibly depend on the fact that the PL/SQL engines are in different versions. When using SQL Developer you use the PL/SQL engine in the database. When using Oracle Reports you use the PL/SQL engine in the Oracle Reports Server (Web Logic Server even maybe). These versions - in the Forms and Reports realm - are different (read: a lower version) than the PL/SQL engine in the database.
If I check what version I have in Oracle Forms, as an example, I get 11.1.0.7.0 (Help in the Oracle Forms Builder menu) but in the database I have (select * from product_component_version;) 11.2.0.3.0.
That COULD be your issue...how to fix it I am not sure...

How can i Auto Size the Column width in RDLC Report

Hi Friend's,
I have created Windows application with RDLC Report. I am binding(Generating) dynamic columns and data's in RDLC Report Using Matrix control, I need to make Auto size of Column width for each Column in
Matrix of RDLC report. So Can any one suggest me to make the Auto Size of Column Width in RDLC.
Thanks in Advance,
Mohan G

Hi Mohan,
In Reporting Services, the column width/height is hard-coded, hence, we cannot set the column width/height dynamically or based on an expression. So is the report size.
In addition, since it is a RDLC report, we need a ReportViewer control to display this report within a custom application. If you need to change the size of the whole report, we can set the AsyncRendering property of the ReportViewer control to false, and
set the SizeToReportContent property to true.
Regards,
Mike Yin
TechNet Community Support

"Load report failed" after upgrading to Crystal Report for VS 2010

I switched to Visual Studio 2010 few months ago. Today, I needed to update my Crystal Report reports, so I installed the Crystal Report for Visual Studio 2010 on my local server. I updated my reports and it works fine on my local server.
On my remote server, I installed the Crystal Report runtime engine for Framework 4.0 (note that my project use the framework 3.5) and published my project. But now I got the following error when I want to create a report "Load report failed". I double-checked the path of my report and its permissions (note that it was working before the update).
Am I missing a step ?
Thanks for your help.
Edited by: David1111_ on Mar 1, 2011 6:08 PM
Edited by: David1111_ on Mar 1, 2011 6:09 PM

Googling 'FILE LOCKED WITH ONLY READERS' I came up with the following:
http://forum.sysinternals.com/topic21378.html
So, no, that does not appear to be the issue.
However my assertion - given that the correct dlls are loading - is still that either the report is not there (do you see it loaded in Process Monitor?) or the process has no access to either the actual rpt or the temp files that the print engine creates. Those really are the only reasons for report load errors.
This being a web app, try a simple win app - as a test. All you need is the viewer and CrystalreportViewer1.ReportSource = <path to report> (use a saved data report). Compile, throw the exe on the server. Run. What happens there?
- Ludek

Load report Failed, COMExpection: System cannot find the path specified

Interesting problem:
I have an application that runs on a web server (currently running it as simple test application to make solving this easier). We use a BO XI report to load data from the DB via a stored proc, then run an ExportToStream to get CSV data to return to the caller.
It all works well as long as I run the application under the NT Account logged into the Box (W2k3, R2). But when using a different account (it's a domain admin account), it fails with the following error:
System.Exception: Load report Failed. ---> System.Runtime.InteropServices.COMException (0x80004005): The system cannot find the path specified.
at CrystalDecisions.ReportAppServer.ClienDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options)
at CyrstalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod).
The report is located on a file drive the openMethod is OpenReportByTempCopy. The Temp directory for the user (landes) exists on the box, all things seem to be in place.
Anybody know that path is specified and how to overcome this?
Thanks

Will it be possible to check this registry key: HKEY_LOCAL_MACINE\SOFTWARE\Suite 11or11.5\Report Application Server\InprocServer\LocalConnectionMgr and verify if the ConnectionDirectoryPath is set to something like C:\ ?
If not, set to C:\ and see how it goes after running your app.
Cheers
Alphonse

RDLC report fails to build simple expression

Similar Messages

Maybe you are looking for