RDP Error: Your credentials did not work. SAP AS ABAP 7.4 SP5 incl. BW on SAP HANA 1.0 SP7

Hi Experts,
I have created instances from the SAP Application Server ABAP 7.4 SP5 incl. Business Warehouse on SAP HANA 1.0 SP7 [Developer Edition] free trial solution, as it is described in documentation. But I cannot connect to the Frontend Server instance (Windows 2008) via Remote Desktop Connection, I got a message: Your credentials did not work. User: Administrator, with the master password (pwd not mistyped, while it works on PUTTY, via Saplogon, etc.). I have a 64-bit Windows 7.
I have done the following so far:
First I have created an instance with the Public option, but the same RDP error. Then I have created a new instance as a Corporate Network. The result is: I can connect to VPN service, I can ping the Windows server, but I cannot log on to it with RDC. On AWS I have opened all ports for this instance. Then I updated my RDP, JAVA, enabled RDP on Firewall. Just for a test, I have also switched off Firewall and the AntiVirus program, still nothing. I have tried a Remote Desktop Connection to my Windows Instance from another laptop with Windows 32 bit system (from home and work too), and still facing the same problem: Your credentials did not work. Then I have also tried a tip from windows site (enablecredsspsupport:i:0 into .rdp). When I start the RDC, I get a certification error: The server name on the certificate is incorrect, but I can proceed. Now the windows logon screen on the remote system appears, but still the same result: The user name or password is incorrect.
I would really appreciate some help.
Thanks,
Andrea

Hi Yogesh,
Unfortunately this problem is not solved, I still cannot use the Frontend Instance. I use another solution: I manage to access the SAP Backend instance ( SAP HANA and AS ABAP ) from my local client (laptop). The disadvantage of this solution is that I had to install myself the client part ,but at least it works.
Regards,
Andrea

Similar Messages

Remote desktop credentials did not work

Hi everybody...I've noticed quite a few problems with this around here, but my situation is far less complex. See I have a Surface Pro that I'm trying to use to remote access my desktop. My desktop is running Win Professional and has Norton 360 on it for
security. I'm just running over my home network at the moment so I'm operating within the same WLAN. When I try to connect via my Surface Pro, after putting in my desktops computer name, I come to the point where I have to enter the credentials. This was pretty
simple as I only have the one, So I put in my Admin log on info (just as I would to log on to my desktop normally). but after I do I get the dreaded "Your credentials didn't work" page. I've tried over and over again but It simply wont work. I have
both PCs set up to accept Remote access, I have Remote Display cleared thru the Firewall, I even tried at one point to use the non- NLA just to see if it would work, but to no avail. I can't connect from my desktop rig to my surface either. When I try that
I get "an authentication error has occured. The Local Security Authority could not be contacted", I saw in another forum that this could be due to an expired password, and even tho I assumed that was for a VPN access I ensured m,y passwords were
new and that I was no longer using a PIN to unlock my Surface. I'm kind of expelled my options here, I thought this would be a simple click-n-play considering I'm in home and not using any other software/servers/whathaveyou but this setup has beaten
me. Can anyone help?

On your local machine Open Windows command prompt type: gpedit.msc -> Press Enter -> a new window will popout
Go to Local Computer Policy –> Computer Configuration –> Administrative Templates –> System –> Credentials Delegation
Double Click on “Allow Delegating Saved Credentials with NTLM-only Server Authentication”
By default it will be “not configured”
You will see radio buttons -> Enable the policy
Click the “Show” button in the options window below and enter the value “TERMSRV/*” (without quotes) into the list.
Click Apply button
Do the same thing for the following policies:
Allow Delegating Saved Credentials
Allow Delegating Default Credentials with NTLM-only Server Authentication
Allow Delegating Default Credentials
Make sure that "Deny Delegating Saved Credentials" is not enabled or does not contain “TERMSRV/*” in the list
Close all windows
Open a command prompt and use “gpupdate /force” command to apply the policy directly.
I had an issue with Windows 8 RDP not allowing a login unless the computer name was typed in, and the solution above worked perfectly. Thank you! Thank
you! Thank you! Kev

Windows 8.1 Remote Desktop Not Connecting - "Credentials Did Not Work"

Hi,
I am having trouble connecting remotely to my work's servers. It was previously working fine, but today I upgraded to Windows 8.1 and now I'm getting an error. It says my credentials do not work. Now, my username and password are both still
valid, as they were used to log in from another computer. I initially thought it was that the firewall was preventing me from connecting, but I enabled the Remote Desktop app and it still does not work.
I'm kind of at a loss on where to go from here so any help would be appreciated.

Hi,
Please try the method below to fix this problem for test.
Open Group Policy, then navigate to
Local Computer Policy\Computer Configuration\Administrative Templates\System\Credentials Delegation\
Open Setting Allow Delegating Saved Credentials with NTLM-only Server Authentication, set it to
Enabled click on button Show... and in Show Contents
window add Value TERMSRV/terminal.server.com. Close all windows by pressing
OK.
In the end, Open cmd and enter gpupdate
command to update your policy.
Roger Lu
TechNet Community Support

IWeb Error: "Your search did not produce any results."

I just updated my iWeb and added the new search and comment features to my iWeb site. I am happy to see these features added but the search feature gives me a page displaying "Your search did not produce any results." Does anyone else have this issue? I am using my .Mac account and did a "Publish all to .Mac" to see if that would help. Comments work great. Can anyone help? Not good to have a feature that does not work.
Cheers!
Patrick

I am having the same problem and can probably give you an answer as to why the search feature is not working...
Look carefully and you may notice that by re-publishing your site with 1.1, iWeb has converted all text on your site to image files (probably .png). This is what happened when I re-published.
Therefore, there is technically no text to "search" through...
No fix as of yet... I will ttry to republish yet again tonight

Updated to yosemite, now in iPhoto when I try to send a photo I get the following error'Your email did not go through because the server did not reply'. Help please.

Hi, I've recently upgraded to Yosemite. I tried to send a picture out from iPhoto as I regularly do without issue. Now I get this error message, 'Your email did not go through because the server did not reply'. Can you help please?

Try rebuilding your iPhoto library. Directions are simple Rebuilding the iPhoto library. Please post back after doing the rebuild and then re-testing.

TS1559 The fix to reset your wifi did not work. Still cannot connect my wifi or bluetooth. What now?

Wifi button was greyed out, tried the fix on this forum and it did not work. What now?

Make an appointment to have it serviced.

Iphoto can't share via email; error message: Your email did not go through because the server did not reply.

I can never share via email, using iPhoto. The error: Your email did not go through because the server did not reply. always pops up. I have no problems with my server or internet connection.
Any ideas?
thanks.

Go into iPhoto's Accounts preference pane and delete the email account there. Then add it back. If that fails you can select Mail as your email client in iPhoto as that's more reliable and flexible. It also offers stationary for photos that are not unlike those in iPhoto's client:
and using Mail as the client will allow you to have a Sent copy automatically.
OT

Sorry Demo that did not work

Sorry Demo but your reply did not work, I tried to download some music but all it did was revert back to re-send the agreement to me, the AGREE button to click did not appear, why cant you put the "AGREE" button on the bottom of the agreement page, its so simple we read it then click agree, job done instead of chasing around the system looking for the " AGREE" to click ok. Regards.MikeG4CFZ.

You marked the first discussion as solved, so you are not likely to get any more responses there. This was the discussion,
Hi, new to this how do I Agree with itunes contract, it says click Agree where?
In light of the fact that other one is is marked solved, let's continue here. I'm not really sure why you are getting caught in this loop. I can't remember what I had to do in order to agree to the T&C it was so long ago.
Read the instructions here again.
Set up an Apple ID in iTunes - Apple Support

My Ipod is stuck in recovery mode with the plug in to itunes thing on the screen I tryed to restore it but I keep getting a error 28 and I tryed to do the reset thing but it did not work what do I do?

My Ipod is stuck in recovery mode with the plug in to itunes thing on the screen I tryed to restore it but I keep getting a error 28 and I tryed to do the reset thing but it did not work what do I do?

Hi,
You could see if this helps...
DFU Mode / Unable to Update or Restore
http://support.apple.com/kb/HT1808
DFU Mode
Open iTunes and Connect the iPod to your Mac
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time
After 10 Seconds release the Sleep/Wake Button until iTunes tells you it has Detected an iPod in Recovery Mode...
The Phone Screen will remain Black... Now Restore.
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414

I get this error message when I try to email photos using iPhoto: Your email did not go through because the server did not reply.

I get this error message when I try to email photos using iPhoto: Your email did not go through because the server did not reply. How can I get this to work when my internet is connected?

Are you able to email from Mail with those two accounts? If so:
1 - go to iPhoto's Accounts preference pane and delete both accounts. Now add them back and try again.
2 - a better solution IMO is to set Mail as the email client for iPhoto is iPhoto's General preference pane. This gives you better access to your contacts, a sent copy of all emails and, if you want a layout similar to iPhoto's, photo layouts located in Mail's stationary.

TS1718 I tried to update, did not work, unintstalled did not work. Now when I try to install i get error message "The feature you are trying to use is on a network resource tha is unabailable. Looking for itunes64.msi path.

I tried to update, did not work, unintstalled did not work. Now when I try to install i get error message "The feature you are trying to use is on a network resource tha is unabailable. Looking for itunes64.msi path.

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

I have an error 130:9 in Photoshop Elements associated with AMT Subsystem failure. I have tried Licencerecovery109. Did not work. I cannot uninstall Photoshop Elements. I get an error 1316 and the program is reinstalled. Please advise.

I have screen dumps of the errors but cannot paste them

Hi Hans
Just to summarise:
If I run Photoshop Elements I get a window headed "AMT Subsystem failure". It states "This product has a problem which requires that you restart your computer before it can be launched. If you continue to see this message etc. contact Adobe Technical Support etc. Error 130:9. http etc".
I have tried to run LicenceRecovery 109. This did not work. I have tried other suggestions on the internet. Nothing worked. This included resetting FLexnet.
I then tried to uninstall and reinstall Photoshop Elements. There is no repair facility. The uninstall gets about 95% through and then stops and replaces all the files. I get a window headed "Adobe Photoshop Elements 8.0 Setup". It states "Error 1316. A network error while trying to read from the file C:\windows\installer\adobe photoshop elements 8.0.msi."
That is the details of the two screen dumps which I have.
Please advise.
Tom Lloyd

HT5654 Just tried 3 times to update iTunes on my PC running Vista. There was an error. It stopped the installation. Now iTunes will not start at all. The error message tells me to reinstall which I tried but did not work. What should I do?

Just tried 3 times to update iTunes on my PC running Vista. There was an error. It stopped the installation. Now iTunes will not start at all. The error message tells me to reinstall which I tried but did not work. What should I do?

Hello, Jdragone.
Thanks for the question. Start with completely uninstalling iTunes and all of it's components in the order specified in the article below. Once this is done, download and install iTunes.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
If you receive any errors when uninstalling any components of iTunes, try the steps in the article below for each component that gives you an error.
"The feature you are trying to use is on a network resource that is unavailable" alert appears when removing Apple software in Windows
http://support.apple.com/kb/TS3704
Cheers,
Jason H.

I attempted to perform the itunes update on two different PCs and itunes will no longer open and I received a message to reinstall itunes. The reinstall did not work and I now receive a Runtime error message (R6034) re: library loading incorrectly. Help?

I attempted to perform the itunes update on two different PCs. Itunes will no longer open and prompted me to reinstall itunes. The reinstall did not work after several attempts and I received an error: "Runtime error R6034. An application has made an attempt to load the C Runtime library incorrectly. Please contact the application's support team for more information." Has anyone else had this issue? How can I resolve it?

I've been having the same exact problem this morning, and from the looks of it a lot of other people are posting about this issue, so I don't know if it's maybe something wrong with the download but I'm just relieved that it seems to be that instead of a corruption issue with my windows installation. I'm just wondering how long this will take to be resolved.

Pdf email attachments - error msg after download "not decoding" - creating DWORD key did NOT work!

I went to REGEDIT and installed the DWORD key as suggested by ADOBE to fix problem created by security update & it did NOT work!! Attempting to save then open the files gives same error msg. I sent multiple emails from a book scanner at the library with pdf files in quick and searchable formats & neither will open! Someone else that I forwarded the email to was able to open with no problem & he is running version 10. There is no option to load earlier versions!!!! I am running version 11 on Windows XP.

I scanned hundreds of pages using a book scanner @ the law library - the USB port was not working so I had to choose the send by email attachment option. Received 30 emails & NONE (so far) of the pdf attachments will open - the error msg states "Reader could not open "doc" because it is either not a supported file or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)." I forwarded 2 emails to someone else running version 10 - he had no prob opening from email (I have version 11 & then I also reinstalled 9.5 & STILL getting the same error msg)! Used someone elses's computer who is running version 10 & same error msg. Each time I try a fix I then go to a 'new' unopened email & attempt to open an attachment that hasn't been previously downloaded. Adobe supposedly has a fix - from Regedit - create DWORD key @ HKCU/Adobe/Reader/11/AV General "bValidateBytesBeforeHeader" - I did that & restarted computer each time I installed etc - still NO solution! So unless you have another idea I have a THIRD 6 hour roundtrip to the Law Library in KC in my near future!
Drew Davis
Sent from my BlackBerry® powered by Virgin Mobile.

RDP Error: Your credentials did not work. SAP AS ABAP 7.4 SP5 incl. BW on SAP HANA 1.0 SP7

Similar Messages

Maybe you are looking for