RDS Web access 2012 empty

Hi,
the RDS web became empty,
I enabled logging in %systemroot%\web\rdweb\Web.config and the log being created in %systemroot%\web\rdweb\App_Data says:
w3wp.exe Warning
0 2014/10/24 16:37:58 [Warning] 35 Could not retrieve workspace info from the store, falling back to Web.config
w3wp.exe Warning
0 2014/10/24 16:37:59 [Warning] 53 Could not retrieve workspace info from the store, falling back to Web.config
w3wp.exe Warning
0 2014/10/24 16:38:02 [Warning] 44 Could not retrieve workspace info from the store, falling back to Web.config
any Ideas?

ok, so I solved it by just deploying the web access on another server

Similar Messages

Emails show up blank sent from web access 2012

When a user sends email to another Groupwise user, it shows up blank in the Groupwise 2012 client. You have to click view, and change the default from html to plain text.
We are on sp1.
Is there a fix for this?

In article <[email protected]>, Itverwaltung
wrote:
> We have two webacc's and have the same error on one of them.
> GroupWise 2012 Sp2
>
Elaborate please. I have clients on the same version without such a
problem.
Where are they showing blank? To other GW users? External?
Are you sending html or text messages?
Are the recipients checking both html and text views?
What platform is WebAccess running on?
Andy of
KonecnyConsulting.ca in Toronto
Knowledge Partner
http://forums.novell.com/member.php/75037-konecnya
If you find a post helpful and are logged in the Web interface, please
show your appreciation by clicking on the star below. Thanks!

Problems with Win 7 64 bits printer configuration on RDS Web Access

hey All,
I have a scenario with RDS 2012 with Session host in 2008 R2 SP1, and on clients with windows XP SP3 and win 7 SP1 32 bits, printer configuration looks ok but in windows 7 64 bits it looks like a truncated configuration , i have been tested every solution
that was reported before, like changing GPO, install Drivers in the clients and in the server, changed display resolution (to print in video) and nothing works, is any issue or incompatibility reported in this cases ?
Thanks in advance
Breno Andrade

Hi,
Thanks for posting in Windows Server Forum.
As this thread has been quiet for a while, we assume that the issue has been resolved. At this time, we will mark it as ‘Answered’ as the previous steps should be helpful for many similar scenarios.
If the issue still persists, please feel free to reply this post directly so we will be notified to follow it up.
BTW, we’d love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar problems.
Thanks for your Support & understanding.
Regards.
Dharmesh Solanki

Adding favicon.ico to 2012 RDS Web page

Trying to add a custom favicon.ico to our 2012 RDS Web Access. I've tried putting it in C:\inetpub\wwwroot and C:\Windows\Web\RDWeb with no sucess. Any ideas?

Hello!
I have same problem.
I would like change favicon.ico in RD Web Access 2012R2, but i cannot do it. (I try
https://msdn.microsoft.com/en-us/library/ms537656(v=vs.85).aspx#Create_the_Correct_Size_Icon
http://www.html-kit.com/support/favicon/favicon-quick-guide/
http://stackoverflow.com/questions/6296038/favicon-not-showing
http://stackoverflow.com/questions/9963584/how-to-add-favicon-ico-in-asp-net-site)
everything does not work.
How can i change favicon in RD Web Access 2012R2?
Thank you in advance!

RD Web access SSO - remote desktop doesn't work

Hi,
This is my first post in here, and I hope you gays can help me out.
I am currently experiencing some issues with RD Web SSO not working as I would like it to work. I have found countless articles and guides describing how to get it to work, but no guide have yet helped me.
The problem is that when I log in on the web access and open a published application everything works fine I wait 5 sec and the application pups up, but when I try to open "Remote Desktop" then I get a new log in box where I must enter my log in credentials
again (after entering my credentials everything work great.)
The problems I am currently facing is produced in a demo environment configured as follows:
1x DC server (DC01) also the lic server
2x RDS server (RDS01/02)
1x RDS Connection broker (RDCM01) I have created a farm named "farm01.mydomain.com"
1x RDS Web access server (RDWA01)
1x RDS Gateway (RDSGW01)
(All the Servers are installed with Windows server 2008 (R2) SP1, and have the latest update.)
I am publishing my demo environment on the internet, i have created a domain name for my gateway and my web access and they are both accessible from the web (rdwa.mydomain.com and rdsgw.mydomaim,com). I also have secured everything with an SSL wildcard certificate
( my external and intern domain names are the same so I am using one SSl certificate) that is trusted on the web.
when I log in on the web access server trough (IE9 or IE8 ) from another network(wan) and I open a published application (calculator), it pop ups in just a few seconds. But when I try to open my Remote desktop I get a login box where I must enter my
username and password one more time.. after that remote desktop opens and everything works great.
My laptop is a Windows 7 professional with RDP 7 and IE 9, and is not member of a domain (just a workstation), I have tested it from multiple workstations and networks(Also win 7 and RDP7) but even there I have the same problem.
Thinks that I have tried tell now:
I have created a kerberos account as mentioned on
MSDN
I have checked my group permissions as mentioned
here
And many more blogs and forums
I have tried multiple settings on RDCM, RDWA, RDSGW and RDS server
Right now I am out of ideas, and I hope you gays can help me out..
thanks in advance,
Pouyan

Thnx for you advise,
Did you go into your RemoteApp Deployment settings and change the server name to the farm name "farm01.mydomain.com?"
Yes
Also in the Session Broker's RemoteApp and Desktop Connection Properties window change the Connection ID to the farm name as well.
actually I couldn't find out what to put on the connection ID so I had left it just default, but after changing it to the farm name it still doesn't work
Did you sign you apps with the cert used on your RDS servers?
yes, I am using a wildcard ssl certificate to sign all the servers/apps with.
there is
something that
strikes me, when I log on the web access and click on a published application (that is hosted from the same RDS servers) then I get a information box. when I click on the "details" button I see on the bottom "use the following credentials to connect" and my
domain and username are published there. But when I click on the "Remote desktop" icon and do the same I can't see this information!!
Also I don't think that its an SSL problem, because after log in again it works perfect without any warning.

Publish RD Gateway and Web Access with One-Time Password (OTP) / Two-factor Authentication WITHOUT ISA/TMG server

Hi everybody,
I've been struggeling with this problem for a few weeks now and can't find a way to solve it.
We have an RD farm (Server 2012) which consists of two Remote Desktop Servers with Connection Broker and Web Access.
I've recently published a new server, containing RD Gateway and Web Access in our perimeter network.
Now we've got restrictions that OTP/2FA must be used for the external deployment and we've decided to go for a solution from Gemalto.
The "program" is called IDConfim and the server is called SA Server (Strong Authentication).
Also it's important that NO ISA/TMG server is supposed to be used, the OTP/2FA is supposed to work seamless with the Web Access/Gateway.
After hours discuss we came to a point were their NPS agent setup would be the only way to accomplish our goals.
The setup is supposed to be like this:
LAN:
1 DC (2008 R2)
RD Farm (2012)
1 SA Server (2012)
DMZ:
RD Gateway/Web Access (2012)
Were Gateway and Web Access should forward the authentications with NPS to the NPS agent on the SA server.
When you print your AD account to authenticate you add the 6 digits of OTP which you recieve from you mobile app.
Initially this seems to work, the Gateway forwards the request to the remote NPS server, BUT only if you write the correct AD password
(without the OTP extension).
If you write the correct AD password the authentication is forwarded to out SA Servern and it's beeing rejeced because the password doesn't
contain the correct OTP extension.
The problem comes here.
When you write you AD password along with the OTP extension you get a Windows Security error in the eventlog (On thw Gateway server) like this:
An account failed to log on.
Subject:
Security ID: NULL SID
Account Name: -
Account Domain: -
Logon ID: 0x0
Logon Type: 3
Account For Which Logon Failed:
Security ID: NULL SID
Account Name: user
Account Domain: domain
Failure Information:
Failure Reason: Unknown username or password.
Status: 0xc000006d
Sub Status: 0x0
Process Information:
Caller Process ID: 0x0
Caller Process Name: -
Network Information:
Workstation Name: server
Source Network Address: 192.168.x.x
Source Port: 63003
Detailed Authentication Information:
Logon Process: NtLmSsp
Authentication Package: NTLM
Transited Services: -
Package Name (NTLM only): -
Key Length: 0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
What i can see it's a NTLM error, but hey?! aren't we supposed to forward all authentication handeling to the remote NPS server?
The problem is that no matter what i try the above problem stays there.
Is it not possible to just forward ALL authentication handeling to a remote server?
The only solution I've found to get it working someday in the future is this:
"Remote Desktop Pluggable Authentication and Authorization", which is supposed to be introduced in 2012 R2.
Also this link describes it:
http://archive.msdn.microsoft.com/Release/ProjectReleases.aspx?ProjectName=rdsdev&ReleaseId=3745
Please, bring me some answers before my head explodes! :)
PS, long question = maybe some errors, ask me if something is unclear.

Hi,
Based on our experience, if the NTLM error occurs, please check the password.
Regards,
Mike
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Transfer client custom control to web access.

Hello,
in my team we work with TFS 2012 and we have created some custom controls for Visual Studio 2012/2013. Because we have users that they don't want to install Team Explorer to access TFS, we decided to make these custom controls for web access. Is it possible
to convert the already implemented custom control into a new web custom control?
Thanks in advance!
Spiros Merkouris

Hi Spiros,
Thanks for your post.
As far as I know there’s no default way convert VS custom control to Web Access custom control directly.
For how to create TFS 2012 Web Access work item custom control, please refer to the information in this article:
http://blogs.msdn.com/b/serkani/archive/2012/06/22/work-item-custom-control-development-in-tf-web-access-2012-development.aspx.
For how to deploy TFS 2012 Web Access work item custom control, please refer to:
http://blogs.msdn.com/b/serkani/archive/2012/06/22/work-item-custom-control-development-in-tf-web-access-2012-deployment.aspx.
For more custom controls, please refer to:
http://witcustomcontrols.codeplex.com/.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Remote Web Access using "UPN" or Email address

Hi there,
I noticed this thread talks about the thing I would love to have.
http://social.technet.microsoft.com/Forums/en-US/4192a34b-d399-4aa4-8ee2-dc6a327cb952/server-error-in-remote-application-using-upn-to-log-on?forum=smallbusinessserver
I understand the SBS is designed for smaller, non-it specific, however most of the places that you do install are also limited so telling the when you use the RWA you use the "username" but when you log into Office365, you use your email address,
it would be nice to have them all the same.
I see that from here you are able to modify the RDWeb.
http://msfreaks.wordpress.com/2013/12/29/step-by-step-customizing-rd-web-access-2012-r2/
But I understand that the Essentials is an out of the box solution, so maybe nobody has wanted to try or to fix.
The first post mentions about a "Error" with RWA in 2011 and they still haven't found something for this? As they did mention about looking into it, however, no solution, so I can't be the only person asking for this feature of consistency,
as I know there are other out there.
Does anyone have any suggestion on how to enable this? I swear that my Server Essentials 2012 this worked, as I tested it, so not sure what happen in R2.
Kevin

Hi Susan,
Thanks for the post.
Maybe I am the only person out there... I have a few of these in the field, and I hate telling people that you user your "Username" for RWA, but you use your Email address for Office365...
Not exactly what I was hoping for, as I'm sure that server 2012 allowed this functionality. Because it was one of the first things I tested when
I installed Server 2012-E, mainly because it's
broke in SBS 2011. I just wish it was more consistent that's all, especially when you are using Office365.
Kevin

Users see all applications in RDS 2012 Web access in one-way trust domain environment

Hello!
We have RDS 2012 deployment in domainA.local. There is a one-way trust between domainA.local and domainB.local: A trusts B and B doesn't trust A.
A user from domainB.local authenticates in Web-access interface (wa.domainA.local) and sees
every published application in every collection in the deployment independently of UserGroups setting of collections and applications. This occurs for any domainB user.
In the security log of wa.domainA.local we can find an event :
An account failed to log on.
Subject:
Security ID:                IIS APPPOOL\RDWebAccess
Account Name:                RDWebAccess
Account Domain:                IIS APPPOOL
Logon ID:                0x2C7B16
Logon Type:                        3
Account For Which Logon Failed:
Security ID:                NULL SID
Account Name:
Account Domain:
Failure Information:
Failure Reason:                An error occurred during logon
Status:                        0xC000005E
Sub Status:                0x0
Also in network trace on wa.domainA.local kerberos error could be found:
On TGS-REQ for krbtgt/[email protected] there is an answer: KRB5KDC_ERR_S_PRINCIPAL_UNKNOWN (7), server name krbtgt/domainB.
How to deal with this issue? The aim is to show only specified applications to domainB users.
Any help would be appreciated.

Hi,
Thank you for your posting in Windows Server Forum.
Please check below links might useful for your case.
“After adding the RDS server’s computer account to the Builtin Windows Authorization Access Group domain group, the RemoteApp icons displayed perfectly.” (Quoted from
this article)
1. Remote APP list empty
2. RD
Web Access unable to access Source (RD Server)
In respect to Kerberos Error, refer this link for troubleshooting.
1. Troubleshooting Kerberos Authentication problems – Name resolution issues
2. Kerberos Authentication problems – Service Principal Name (SPN) issues - Part 2
Hope it helps!
Thanks,
Dharmesh

RDS 2012 Connection Broker and Web Access in different domains

Hello!
I'm trying to add Web Access (WA) server to RDS 2012 Deployment. WA server and other servers in Deployment are in different domains (in different forests with 2-way forest trust).
WA server was added to Deployment
successfully without any warnings.
We have many applications published but in this new WA server there are no application icons in Rdweb page at all.
There is nothing interesting in logs on WA server as well as on Connection broker servers.
Is this design
acceptable? Which additional actions are needed to make application icons visible?

Hi,
Please refer below links and cross verify the Web Acess server settings.
http://blog.kristinlgriffin.com/2010/03/rd-web-access-is-emply.html
http://social.technet.microsoft.com/wiki/contents/articles/5974.the-case-of-invisible-remoteapp-programs-a-k-a-no-remoteapp-programs-listed-on-rd-web-access-site.aspx
Regards,
Manjunath Sullad

TFS 2012 - WI Query in TFS Web Access - History field contents appear with html tags presented as text

When History field is selected as a column to be displayed in a WI query result, its contents are displayed with the HTML tags as if they where text, e.g. <p> contents </p>...
This occurs when query is run in web access contents in IE and when result is sent via email from within TFS (there's a button for this purpose).
However, in Visual Studio 2012 the same History Column contents are shown without the tags, as one would expect.
Furthermore, when one clicks on Open In Microsoft Office, for this query results in VS, and selects result in Excel, the History column in the Excel appears empty.
The only way we found to bypass this issue for now, it to mark all the query result lines in VS, and right click for "print selected list..." to a virtual PDF printer. This way the result looks reasonably ok when History field is included.
Kindly advise, Thank u very much.

Hi Moital,
Thanks for your post.
As far as I know history content will display with the HTML tags if there’s multiple lines in content, and History content not support show in Excel, that’s by design in TFS Server.
As Clementino said, you can submit this scenario in connect site, Microsoft engineers will evaluate them seriously.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

2012 R2 Web Access Logon

Just trying to get a definitive answer to the age old question of can we remove the initial user logon requirements when accessing the RD Web Access server in a 2012 R2 RDS deployment?
I was under the impression that the Single Sign-On only removes the logon prompts when users try to access a RemoteApp or Session Host once they've logged on to the Web Access server?
Is there a way to use the current users credentials (they're all connecting from domain joined windows 7 or 8 machines) to logon to the RD Web Access site?
Cheers for now
Russell

Hi,
AFAIK you can only to single sign on when using published applications, not to the actual login page on remote desktop web services.
You may be able to look at changing some of the authentication options in IIS and making sure the website is in the local intranet site to see if you can pass through the creds.
Thanks
Regards,
Denis Cooper
MCITP EA - MCT
Help keep the forums tidy, if this has helped please mark it as an answer
Blog: http://www.windows-support.co.uk
Twitter: LinkedIn:

Web Access for Remote Desktop on Windows Server 2012

Hello,
i've a Windows Server 2012 without a domain. So i installed the remote desktop session host, the remote desktop license server and the remote desktop gateway as a server role only. All is working fine. Without a domain, no management tools for remote
desktop are available. So i configure the remote desktop via the registry. I define (via registry) some remoteapps, too. All values are copied from a running Windows Server 2008 R2. So the remoteapps are runing.
Now i want to use the new Microsoft Remote Desktop client for Android. To use a remoteapp i must define a remote resource. To define a remote resource i need a url to the web access for remote desktop. So i installed the web access. But if i login to the
web access, i don't see any remoteapp. What's wrong? I've set the ShowInTSWA to 1. What must i do to access an existing remoteapp via web access?
Martin

Hi Martin,
Server 2012 RD Web Access is designed to retrieve published RemoteApps and Desktops from a Server 2012 RD Connection Broker and/or a Server 2008 R2 RD Session Host server. From your description it doesn't appear that you are using either of the above.
I know it is a more complicated set up, but you should consider having a domain, creating a RDS deployment, etc., so that you can use the full featureset as it was intended. You can do it all on a single server if needed. For Server 2012
there is a hotfix that needs to be applied to permit RD Connection Broker to work on the same server instance as active directory.
-TP

How do I change the URL to the Remote Web Access server in Windows Server 2012?

Hallo!
I have set up a Remote Dexktop Service using the "Quick" deployment method in Server Manager and everything is working greate internally, but I cannot start an app published in Remote Web Access from outside our network.
The problem is that it wants to start the using the internal URL, for example, server.domain.local, instead of the external one, for example remote.server.com.
I therefore want to know how I can change the default URL for the Remote Web Access server and all the Remote Web Apps in Windows Server 2012?
I have allready looked in Server Manager and I can change some of the deployment settings in server manager, but there is no way to alter the URL of the Remote Web Access server. See below images:
Pressing the internal URL only results in opening the internal URL.
This was very simple to do in Windows Server 2008 R2 using the tsconfig tool, but it does not seam to be any way of solving this in server manager.
A possible sollution would be to alter the registry someware in HKLM->Software->Microsoft->Windows NT->Terminal Services. But this can easaly lead to problems due to wrong format, etc. and is probably not supported.
Is there a simpler and supported way?

That option can be used to connect to any machine that you want. The error message indicates that the client machine cannot resolve the name "server.domain.local" to an IP address that it can connect to.
You have several options for configuring that tab on the RDweb site. You can even remove it entirely.
Customization of RD Web Site
RD Web provides a number of customization options for the RD Web interface, including the ability to control default Gateway server settings and redirection settings. These settings
are controlled by editing the web.config file located in %SYSTEMROOT%\Web\RDWeb\Pages.
Displaying Local Help
To display local help for users instead of the web-based help, edit the LocalHelp value and change the value from false to true.

<add key="LocalHelp" value="false" />
When this value is changed, a user that clicks on Help in the upper right corner of the RD Web login page will open the local help file instead of web-based help.
Hiding the Connect to a Remote PC Tab
The RDWeb page
Connect to a Remote PC tab can be hidden from users to prevent connections to any servers through RD Web other than the servers configured in a collection. By default, this setting is set to true and the
Remote Desktops tab is displayed. To hide the tab, set the value to false.

<add key="ShowDesktops" value="true" />
When the value is set to false, a user will not see the Connect to a Remote PC tab when logged on to the RD Web page
RD Gateway Settings
If the Connect to a Remote PC tab is enabled, an administrator can configure RD Web to use a Gateway server when connecting to remote computers. To specify a gateway, edit the below
value with the name of the RD Gateway server:

<add key="DefaultTSGateway" value="" />
The default authentication method for the RD Gateway server can also be configured by editing the following section of the web.config:

<add key="GatewayCredentialsSource" value="0" />
Devices and Resources
By default, only Printers and Clipboard are redirected on connections made using the Connect to a Remote PC tab. If the user clicks the
Options << button, the redirection settings for a specific connection can be modified
To configure each specified redirection option to be enabled or disabled by default, edit the following section in the web.config file:

<add key="xPrinterRedirection" value="true" />
<add key="xClipboard" value="true" />
<add key="xDriveRedirection" value="false" />
<add key="xPnPRedirection" value="false" />
<add key="xPortRedirection" value="false" />
LAN Experience Defaults
Windows Server 2012 RD Web Access can display a new user selectable option for optimizing the connection for a LAN experience. This option is displayed at the bottom of the RD Web
page and can be controlled by the administrator using the following section of the web.config file:

<add key="ShowOptimizeExperience" value="false" />
<add key="OptimizeExperienceState" value="false" />
This value is set to false by default, but when changed to true, the following checkbox will display at the bottom of the webpage. The LAN experience
checkbox can also be set as enabled by default.
Each setting can also be modified using the IIS Manager user interface:
Don Geddes - SR Support Escalation Engineer - Remote Desktop Services - Printing and Imaging

Windows 8.1 pro Remote App crashes connecting to 2012 Remote Desktop Web Access published application

Using 2012 Remote Desktop Web access to gain access to published applications. The workstation was a Windows 8.1 (home) upgraded to Windows 8.1 Pro with the Media Center add on. Launching the url to the login page for the RDW works fine. When the app is
clicked on to launch the Remote App crashes. How do I get it to properly connect. Other Windows 8.1 pro workstations work. Although none were upgraded from the 8.1 (home) Here is the event.
Faulting application name: mstsc.exe, version: 6.3.9600.16384, time stamp: 0x5215e2b5
Faulting module name: ntdll.dll, version: 6.3.9600.17031, time stamp: 0x530895af
Exception code: 0xc0000005
Fault offset: 0x0000000000065e8e
Faulting process id: 0xab4
Faulting application start time: 0x01cf5f2ed029e83f
Faulting application path: C:\Windows\System32\mstsc.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Report Id: 21a471d6-cb22-11e3-8263-a0886933dd25
Faulting package full name:
Faulting package-relative application ID:

More info.
The computer is brand new HP.
Windows 8.1 pro with media center
processor Intel i7-4700mq - 12gig ram -64bit
Full windows touch support with 10 touch points
The computer is connecting to a 2012 Server hosted on Microsoft's Azure platform. Trying to access applications hosted by this server with Remote Desktop Web services. The computer can RDP using just the mstsc.exe to other computers and to the server with
no problem.
The computer presents the following msg box Body: Remote Desktop Connection has stopped working. I have tried the following to resolve this and narrow the scope:
-Created a new user account for the computer with admin rights, rebooted and logged in as the new user.
-Tried a different user account for the portal, that does work. The user does not show up as connected.
-All MS updates were loaded.
-Added these changes to the registry to keep alive the connection: HKEY_CURRENT_USER\Software\Microsoft\Terminal Server Gateway\Transports\Rpc-----HttpKeepAliveTimeout=dword:00000001
And HKEY_CURRENT_USER\Software\Microsoft\Terminal Server Client----RDGClientTransport=dword:00000001
Loaded this update http://support.microsoft.com/kb/2919394/EN-US
-Removed all printers
-Removed Antivirus
-Added the server to HKEY_CURRENT_USER\Software\Microsoft\Terminal Server Client\Default
-Disabled everything in MSCONFIG startup
-Ran sfc /scannow as administrator - no integrity violations
Any suggestions?

RDS Web access 2012 empty

Similar Messages

Maybe you are looking for