Re: BPC 7.5 SP7 - Consolidatin Entries not generated
Hello,
I would like to share you all the following is a scenario:
I am using the following script for consolidation:
*RUN_PROGRAM CURR_CONVERSION
CATEGORY = %C_CATEGORY_SET%
GROUP = %GROUPS_SET%
RATEENTITY = GLOBAL
TID_RA = %TIME_SET%
// ENTITY = %C_ENTITY_SET%
*ENDRUN_PROGRAM
*RUN_PROGRAM CONSOLIDATION
CATEGORY = %C_CATEGORY_SET%
GROUP = %GROUPS_SET%
TID_RA = %TIME_SET%
*ENDRUN_PROGRAM
I am trying to run RULE040 - IC Elimination.
Currency conversion is executing successfully and generating entries; moving data from NON-Group to Group.
The consolidation script is also executing successfully. However, no entries are generated.
0 Submitted, 0 Success, 0 Fail
I checked all related dimension properties. Looks fine.
If any of you came across the above scenario please feel free to share.
Thanks in advance
RJ
Hi,
Can you send a screen-shot of your business rule table for this please? Can you also send a screen-shot of your Web Admin application parameters for your Finance app and your Ownership app?
If the package completes with no errors but no records generated, that usually means there is nothing to process - so either your source data is not in the correct place, your ownership data is not correct, there is a WebAdmin parameter missing (not likely as no errors), or your business rule table isn't correct.
Tom.
Similar Messages
-
Planning File Entry not generated for items releveant to PM
MRP procedure used for material is reorder based planning , in April -09 the stock for this material is consumed and becomes
zero (reorder point is 8 ,Maximum Stock Level is 8 ) and after that in MRP run the requirement is not generated .
But as per the setting of reorder point PR should be initiated.
When checked the MD21 , material is not flagged ,
I want to know the specific reason why only this material is not flagged for MRP run.
What all settings i can check ?
MATERIAL TYPE : YMRO OP Maint/ Repair/OperSup
Lot size : Repl. to max. stock level after cov. req
Procurement type : FHi,
Run the reports MDRE & MDAB to ensure the planning file entries are correct.
About your query what might have caused a entry not to be in planning file, well it could be many. So run the above reports & then run MRP & check the results.
Regards,
Vivek -
Accounting entries not generating during return deliver PGR
Please any body can help me i am creating a return delivery when doing PGR it should be created the material document as well as accounting document. But the problem is it is only creating material documents i.e. only quantity is updating but accounting entry is not generating. Even i have tried in OMS2 by quantity and value update.
Please help me give me the solution.
Regards.
Lalxmikanta Das
<b><REMOVED BY MODERATOR></b>Hi Das,
Accounting documents are created when billing documents are generated. Accounting documents are never ever generated when a returns delivery document is created.
If u have created billing document for normal sales process and if, an accounting document is generated, One more accounting document is going to be generated when u Cancel the billing document.
In ur case....If U have created a returns delivery document, create credit memo w.r.t returns delivery document. Then an accounting document is generated if ur account determination is configured in ur system.
Regards,
Praveen. -
Palnning entry not generated for the material
Hi,
We RUN the MRP with MD01, but for for some material the PR are not generated, with MD01 I checked the palnning file with MD21 there is no entery for that material but when we RUN single level MRP with MD03 for that material it creates the PR so what can be the problem as for some material the PR are not generated with MD01 but it generates with MD03 all MRP data is proper in material master.
regards,
zafarHi,
Generally the planning file contains a list of all materials which has a valid MRP type in material master and relevant to the planning run. As soon as a material master record is created with valid MRP type, it will be automatically included in the planning file. You can find it in transaction code MD21.Whenever system find MRP relevant transactions i.e Stock updation,Receipt,Issues etc it will be included automatically in Planning file with appropriate indicator(NETPL,NETCH etc.).
Only in some exceptional cases, it is necessary to make an entry in the planning file manually.For an example after run MRP ,that material relevant Indicator will be removed. But still if you want to force it for next MRP run,you can include it manually..
And Please also check in material master entries properly maintained or not.
Kuber -
Time Schema : TIP entry not generated
Dear Expert,
When there is OFF day for an employee and full day record is present in 2002. No TIP entry has generated, while if there is not OFF and 2002 record is there then TIP entry generated by function P2002.
Regards
AjayOption 1: Please review standard PCR TE30. This PCR delimits certain time pairs on the basis of their status.
You can copy this PCR and modify it to meet your requirements.
Option 2: My guess is you are using a custom schema - so please do go through the schema and the time evaluation run to ensure that the P2002 function is called - which means to say that ensure that your schema does not bypass the P2002 function if the day type of the day in question is 1 (off/paid).
Lastly, please do post more details about your problem whenever posting a message. There could be many reasons why a certain functionality is not working for you and, the more details you provide of your problem, the quicker it is to pinpoint a solution. -
Hi, Experts,
For Reclassification of receivables I have done the configuration, when I run the report I do get the line items, which are more than one year old, but the entry is not getting posted. I also do not get any error message. I have maintained the adjustments and target accounts as wel. What could be the reason?
Please guide.
Regards
ShaileshDear Shailesh,
Please make sure customizing is maintined correctly in OBBU, OBBV, OBBW and OBBX.
Additional information regarding the customizing of the sort method and the account determination (transaction OBBU) please note that the categories 'Receivables' and 'Payables' refer to the debit/credit balances of the selected items. Within this category you can define whether postings are to be made for customer/vendor/GL accounts.
I hope this information helps.
Best regards,
Suresh Jayanthi. -
After Canceled Excise Invoice, GL entry not revers
Hi Expert,
Reverse accounting entry not generated for canceled excise invoiceRegards
BK GAIKWAD
M9881908615Sir,
my problem is when we have canceled the Excise Invoice Payble duty GL not revers.
Regards
BK GAIKWAD -
While "Invoice Cancelling- Accounting entry not effected in Trial balance"
Dear All,
Any one knows this please revert back.this Issue is very urgent (We have to Close the Periods)
Issue: While "Invoice Cancelling- Accounting entry not effected in Trial balance"
Invoice which is cancelled and accounting events for Invoice & Cancellation is taken place, but the entry for cancellation is not appearing in the GL Hence the reversal effect of expense is not seen.
I can able to see the Reversal Entry in Payables > Reports > View Accounting A
Here > Tools > View Accounting Events > View Journal Entries > Show Addtional Information > Transfer to GL Status is "No" after that i have Run the Transfer Journal Entries to GL even its not appearing in GL and not transfer to GL.
@Have to Resolve this as soon as possilble, plz any one can lets guide me
Reagrds,
senthilPlz Update this asap.....
-
Error whil posting FI Document using 'F-28' 'Entry not Possible'
Hi ,
When i trying post FI Dcoument using 'F-28'. As sudden given Posting key and account number i m getting the error "Entry not possible'. Can someone tell what is the reason for this.
Regards
Balamurugan NCheck table TBSL : posting key TBSL-BSCHL give allowed account type TBSL-KOART
A-nlagen(Asset),
D-ebitoren(customer),
K-reditoren(vendor),
M-aterial,
S-achkonten (general ledger))
So, you cannot use a [posting key|http://help.sap.com/saphelp_46c/helpdata/en/96/8b3ee943ce11d189ee0000e81ddfac/frameset.htm] like 40 or 50 for a customer account or a 01 or 11 for a bank or expense/fee account.
Regards,
Raymond -
Forex Fluctuation entries not to be passed in BRS
Hi
I have made payment to Vendor on 12th December $1000 (1$ @ Rs. 45.45) = Rs. 4545
At this time entry passed was:
Vendor A/c... Dr Rs. 4545
To Outgoing Bank A/c Rs. 4545
Now on 15th December i am running BRS (FF67).
Rate mentioned in OB08 on 15th December was 1$ = Rs.45.00
So at the time of BRS, exchange fluctuation entry was passed on 15th December
Outgoing Bank A/c... Dr Rs.4545
To Main Bank A.c Rs.4500
To Realised Gain A/c Rs. 45
I have put tick in "Only balance in local currency" in outgoing bank account so that the exchange difference entry is not passed. But inspite of the same exchange fluctuation entry is passed.
Let me know how to avoid forex fluctuation entry.
Edited by: Deepak Agrawal on Dec 21, 2009 4:34 PMHi
If the two documents you are trying to post are in Foreign currency and if Balances in Local Currency is marked in the GL Master, system would post the exchange rate difference to Forex Gain/Loss A/c. However, a better way to avoid this is to post the outgoing payment at Bank specified rate and when you do Bank Reco through FF67, you would do in INR. The system should than not generate the difference entry as the amount in Outgoing Bank and Main Bank GL would be same.
Regards
Sanil Bhandari -
HELP!! My BB quit sending/receiving emails 6 weeks ago. I tried to do the setup again, but error message says "Blank entry not valid" even though the info has been entered (Email & password) I tried to get help from Sprint but as they aren't supporting BB anymore, they just want me to upgrade.
I swapped devices this AM (8350 Black for 8350 Red) and the same issue on this device. Any assistance is welcome!!!
Thank you!If they cannot resolve your issue ask them to escalate your case to RIM. it is what they are SUPPOSED to do when they cannot resolve a BlackBerry issue. Whoever you have been on the phone with does not know what they are doing.
This forum is not an official support channel but rather a peer-to-peer support forum community where other users just like yourself help each other out with their BlackBerry device.
Some things can only be solved by RIM, however, and the only channel to their support is through your carrier.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you! -
Custom Table Entry not in Sync between Different Environment
Hi All,
we have different environment like Dev System, Quality system, performance testing system etc... these are all environment customs table entry not in syn .. Table entry should be syn. How to make it syn all the entry between all environment without do any manual work. Kindly help on this.
ThanksHello Mohammed,
It depends on what type of tables you are referring to. If you have a table of type 'Customizing', you have to transport your table entries across different environments and they will be in Sync.
If you are referring to tables of type 'Master Data', they have to be maintained in all environments.
Table of type 'Transaction Data' by default have different records based on your day to day transactions.
You cannot have all custom tables with same data in all environments. Hope this helps.
Rgds,
Vijay. -
Rectify the error mesage "Account determination for entry *** not possible"
When I run the program ZMR11-Maintain GR/IR Clearing account, I get the below said error message:
+Account determination for entry **** not possible+
How do I rectify them?
Please advise.Check the long text of the error message. It should ideally give details of missing entry in account determination.
-
Idoc INVOIC - error Tax entry not possible in this item - Message no. FF724
Hello,
I have an idoc in error with the following error message.
In the idoc type INVOIC
Segment E1EDK04:
MWSKZ N1 VAT indicator
MSATZ 19.000 VAT rate
MWSBT 20.52 Value added tax amount
In OBCD
Partn.Type PartnerNo Tax type Tax rate Cty Tx
LI FNISL N1 19.000 V2
Input tax N6 is defined in the system with rate 19.000%
Direction 2 Inbox
Current status 51
Basic type INVOIC01
Extension
Message type INVOIC
Partner No. FNISL
Partn.Type LI
Tax entry not possible in this item
Message no. FF724
Diagnosis
You can not enter a tax amount in this item since, due to the posting amount entered and the tax code, a total tax amount of zero has been calculated.
This could either be due to the fact that the tax code has been defined with a value of 0%, or because the posting amount entered (that is, the tax base) is too small.
Example:
With a tax rate of 15%, a tax amount greater than zero will only be achieved with a base amount greater than 0.04. With values of 0.03 and less, it is therefore not possible to enter a tax amount.
Procedure
Only enter tax amounts in conjunction with tax codes for which a percentage rate not equal to zero has been defined. Make sure that in documents with several G/L account items you enter the total tax amount in an item with a sufficiently high posting amount.
do you have an idea to solve it?
Regards
ArnaudMessage no. FF724
Check note 681538
thanks
G. Lakshmipathi -
Cache entry not found error message in java console 1.6.0_05 - Citrix ICA
Client information:_
Windows XP_SP2
Java Runtime version 1.6.0_05
Application: Citrix ICA version 9.4.1868
Slow citrix ICA client connection, repeated errors in the java console stating "cache entry not found". However when I downgrade to Java Runtime version 1.5.0_10 I do not see the "cache entry not found" errors and the Citrix ICA connection is much faster. Basically launches and connects in 10 seconds versus 2 minutes.
Any ideas? Thanks!Hi,
All your classes must be accessible through the web. The easiest solution is to put all your classes in the same folder as your web page.
If your classes are in a different folder (which must be mapped as a virtual directory), try adding the codebase attribute to your applet.
Regards,
Kurt.
Maybe you are looking for
-
IMac network issues... Please Help!
I have been running mavericks for quite a while now but just recently I have noticed that I am having issues with my internet connection. It started happening after I moved into my new apartment and signed up with a new internet provider. I will h
-
TDS Certificate Printing Problems
Dear Sap Gurus i have a problem while printing the TDS certificate 1. Basic TDS and Education Cess are not displayed in the Certificate 2.System is taking the Base amount of the invoice and adding the the base amounts on which the Surcharge, Educati
-
I downloaded my iPhoto collection into Aperture 3. Everything transferred except the Mobile Me Gallery files. What did I forget to do? More importantly, what do I need to do?
-
I am getting a message that sys startup disk is almost full. I cleaned all my old emails out, archived old ones i needed and erased most files on the computer. I restarted but I'm still getting the message
-
6500 all in one wireless not connecting to computers on network.
My 6500 all in one never has connection to all of my computers that are on-line at the same time. Right now, even the main computer that is hardwired to my wireless router has no connection. Only one connected is one of the wireless computer connec