Re: c4450 card stock (avery 8371 business card stock) margin printing problems

I have been dealing with this for a while now. Finally researched the problem and You are right! The printer only works with less than 110 lb paper stock. It says in the the specifications. I have to go buy a new printer. Even the photopaper jams and sticks.
Sorry HP, you have to do better than this. It uses tons of ink...sick of paying $37 for printer cartridges from HP.

nellang507,
Sorry to hear that you too have encountered the "HP Wandering Margin Problem" that occurs with sheet business card printing.
One issue is that most people don't know the 110lb stock specification or what to look for.
We had tried printing on both avery business card sheets (probably 110lb + stock) and cheaper generic business card sheets (probably less than 100lb stock) and had the same problem. Even 4 sheets of regular paper taped together on the long sides would print ok but not perforated business cards.
Here is one link to similar problems people have had as you: http://h30434.www3.hp.com/t5/Other-printing-questions/Avery-Business-Card-Printing-quot-WANDERING-MA...
Good luck with it!

Similar Messages

  • C4450 card stock (avery 8371 business card stock) margin printing problems

    printing to plain paper works fine every time
    printing to cardstock starts printing on the top edge (no margin)
    if i peel the top margin perferation then it prints somewhere else on the page
    did i just buy a printer that cant do cardstock? if not then how do you fix it.
    this is a hardware problem (brand new printer) not a software problem - does the same thing for every software pac that i use
    This question was solved.
    View Solution.

    I tried printing using a matte photo paper, but it didn't work.  My HP C4280 still prints without a left margin on Avery business card stock.
    This IS a bug.  It has to be.  Why on earth would anyone build a printer by design that prints without the margin just because a different paper is used?  If I print with plain paper, it prints just fine.  But when I put in Avery paper, no good.  
    What is the point to this?  So that Avery makes more money from customers who waste business card paper?  So that HP makes more money from customers who waste ink?  I am not happy.  This should NOT be happening.
    HP, fix this problem now.

  • Printing Avery 8371 2 X 3.5 10 per page cards with HP D 1660

    Created with Publisher 2007 a business card... On my D 1660 the bottom of the bottom two cards does not print... Sent the file to a friend with a different printer... He reports all 10 printed with good result... Solution???

    What version of Windows are you using?
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • When I print business cards, they sometimes print 1/4 too high but not always.

    I have my business cards in a Word document using an Avery template. I have used the same file for years. I never had a problem with my Canon printer but after buying an HP Photosmart D110 I have had nothing but problems. When I print then they print about 1/4 inch too high ruining the cardstock and wasting ink. This doesn't happen all the time. Sometimes I print and they are perfect but when I go back and print another, the problem returns. This is the same card stock I have used for years and when it is inserted in the printer it doesn't matter if it is a single page or a stack of them. I have tried previewing the page before printing and the alignment is correct. I've tried printing to a PDF and then printing the PDF, same problem. I try it on the Canon and no problem. Only reason I bought this in the first place was the cartridges were cheaper and I do a lot of color printing and scanning!  I have just replaced the cartridges and did a head alignment so that is not the problem. I have tried it with regular paper and the problem persists. I'm ready to drop kick this thing and buy another Canon!
    This question was solved.
    View Solution.

    Did you ever find a solution for this problem? I have no problem printing the business cards out on a Canon printer, or a different HP printer I used to have, but the D110 is nothing but a pain in the you know what !  I'm using publisher and the avery 8371 card stock,  I searched solutions for days and did everything possible but still they're not printing correctly!! I'm dissapointed in this printer, every time I have a problem with something it always seems to be an HP product!!!  Very frustrating because I never had to mess with any settings in the other printers I had, I would just put the file in, change the quality and click the print button with no problems. I'm ready to throw this printer out the window Anyway thanks in advance and I hope somebody can help me with this issue !!! 

  • I'm using a card template and trying to find what Avery product I should get to print the card on

    I using a Pages greeting card template and trying to find out what Avery product I should buy to print it on. Where is this infromation?

    The Avery web site has the layouts of its products and also ms Word tempaltes that open in Pages.
    If you wish to use the Pages' templates select the overall rectangle of the card:
    Inspector > Metrics
    To find out the size and then look for the matching Avery stock, you will probably have to adjust bot the size and position for a close match.
    However since greeting cards are just rectangles folded in half all you need to do is print them on card stock with some crop marks offset from the corners and cut them out with a sharp knife or a guillotine. Not rocket science.
    Peter

  • How do i get my pictures to load i have to put the card in my printer and then the untltied thing comes up on my desktop  pictures use to would just load and now I can not figure out how to force them

    I have my card from my camera in my printer and it is blinking, the untitled box comes up on the desktop then Iphoto pops up and nothing happens at all    use to do it on its own.  How do I force this to load the pictures

    Sorry I just assumed the force was a easy thing and I have never asked a techo question before.  Hope the information below helps
    It is a Mac Intell
    Operating system is apple mac?  Not sure how to answer that quesiton
    Printer is a HP photosmart c4280 all in one
    Camera is a Sony Cyber  shot
    The untilted thing is when i put the camera card into the printer slot a box on the right hand side comes up on the desk top it is a picture of a white box with a open slot in the front and it states Untitiled.  If I take the card out this box goes away
    I am trying to download pictures.  Use to be I put the card into the printer, iphoto would open and then you could choose which new picutres you wanted to import.  Now iphoto opens up and does not show any new pictures, there is no import at the bottom right and it just sits there.    I would like to load pictures that I have taken all summer.    I do hope this helped and I worded it corretly enough that would make since...
    Thank you

  • Without providing access of mass storage,allow access of data card or local printer ,

    Hello,
    Pls assist in exploring the possibility to allow access of data card or local printer  without providing access of mass storage.
    Balwan Singh

    Hello Balwan Singh,
    You can use two methods on is using Administrative Template and the other is using Preferences, both are available within the GPO in Domain Controllers with 2008 and later.
    Option 1: Administrative Template.
    This setting can be configured either at Computer or User level.
    You need to go to:
    Computer or User Configuration\Policies\Administrative Templates\System\Removable Storage Access
    In here you can Enable the setting "Removable Disks: Deny read access" or "Removable Disks: Deny write access" 
    Just be aware that this settings does not apply to a servers at a "User Configuration" level.
    Option 2: Preferences.
    This setting can be configured either at Computer or User level.
    You need to go to:
    Computer or User Configuration\Preferences\Control Panel\Devices
    In here you need to create a new item as follows:
    - Right click and select new --> Device
    - On General Tab you can select two "Action" options "Use this device (enable)" or "Do not use this device (disable)" in this case you should use the second option "Do
    not use this device (disable)"
    - On "Device class:" you can browse the devices attached to the computer from where you are configuring this GPO.
    In this list yo need to choose the "Universal Serial Bus controllers" node and among the options listed in here you should choose the "USB Mass Storage Device" which is the class used for USB drives.
    Remember that if you are configuring the GPO from a domain controller probably you do not see the "USB Mass Storage Device" in the "Universal
    Serial Bus controllers" node since there does not exists a USB drive directly attached to your domain controller.
    You can workaround this by either connect a USB drive to your Domain Controller or connect with the Group Policy Management Console (GPMC.msc) from a workstation on which you can safely plug a USB drive just to be able to visualize it and configure your GPO.
    Related Info:
    Configure a Device Item
    https://technet.microsoft.com/en-us/library/cc771861.aspx?f=255&MSPPError=-2147217396
    I hope this info help you to reach yor goal. :D
    5ALU2 !

  • HT3702 i have updated my billing information and still can't update the existing Apps. I changed the credit card and still same problem

    I have updated my billing information and still can't update my existing apps , i ahve changed the payment card and still same problem ,what shall i do ?

    It's a credit card, not a debit card ? As far as I know that message will show if you are trying to use a card that was not issued by a bank in the same country as where your iTunes account is based (and you need to be in that country). If you are sure that it is then you could try contacting iTunes Support and see if they can help : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Good evening. needed help. I created an account on my ipad on itunes. then wanted to add a credit card the Mbnet. the problem is that an error appears saying "payment method rejected

    I
    good evening. needed help. I created an account on my ipad on itunes. then wanted to add a credit card the Mbnet. the problem is that an error appears saying "payment method rejected"Can help me?

    iTunes Store: Accepted forms of payment
    Mbnet (virtual) is not acceptable form of payment.

  • Card and Calendar printing projects???

    Am I really correct that Apperture doesn't support Card and Calendar printing projects but only Books? Why on earth would Apple omit these features in their pro software? Does that mean I have to go back and fiddle with iPhoto just to make a card??? Yawn.

    yes.

  • Putting pictures on a memory card, via my printer

    I'm not to sure I have the correct forum.
    I'm trying to put pictures on a memory card, and the card will then go on my digital photo frame, I've put the card into my printer which is  Photo smart 5520, and I use windows 7, when I've done it before with another printer, the card came up as a removable device, and then I just dragged the picture on to the memory card icon, I did this with my Epson, but my HP printer won't do it.
    I asked a while back and the girl who helped me paired it up with the Internet, I did see my pictures on it, but it would not let me put more pictures on, which is why I'm asking again, I hope someone can help me, as I've got know idea at all, I'm not a computer buff, I only know the basics, thank you in advance to anyone who is kind enough to help me
    This question was solved.
    View Solution.

    Thanks for the response. What you are suggesting is that your memory card is not showing on the computer. Is that correct? If it is correct, try another card, and ensure these cards are not locked. If multiple cards do not work on the computer, you can reference this document for assistance on troubleshooting the card reader: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&​lc=en&docname=c01884924
    If this is not what you implied, please provide a more detailed analysis on the issue. I'm only here to help!
    Mario
    I worked on behalf of HP.

  • Design invitation card in A4 print out with duplex and fold to A5

    How can I design an invitation card in A4 print it out with 'duplex' (both sided print out) as A4 and then fold it to A5? I would like to have pictures and text on all four sides of the card. I have a Canon iP5300 printer which allows duplex printing. Can I use any of the Page Layout templates and if yes how?
    Support would be highly appreciated.

    I have a Canon iP5300 printer which allows duplex printing.
    The system is out of the picture since this is only about such driver services as Canon supplies for Canon printers. If the driver lets you do, you can do it. If you can't get the driver to do it, try building out a PDF and stepping into a print shop that will do the printing and folding for you albeit at a price. /hh

  • How do I customize my html page in Dreamweaver CS5 to an Avery template that I wish to print out?

    How do I customize my html page in Dreamweaver CS5 to an Avery template that I wish to print out?

    Dreamweaver and websites do not easily match up to Avery templates.  If you are trying to develop a program for customers/etc to print labels, you should look for a script to generate a PDF file to ensure the accuracy of the printing.
    If you are trying to use Dreamweaver as a substitute to print your own labels, I would highly recommend using Microsoft Word, or Adobe InDesign for a better solution.

  • Business Objects has encountered a problem and need to close

    Hello All,
    "business objects has encountered a problem and need to close"  is the error message i get whenever i try to import from Desktop Intelligence.
    I deleted the .LSI files.....but in vain ,i still have the same problem.Please let me know of any other fix.
    Thanks in Adv

    Hi,
       Just to clarify, did you try to "rename" or "delete" the lsi file?
       Please try renaming it from XXX.lsi to XXX.lsd.old
         (Path : C:\Documents and Settings\USERNAME\Application Data\Business bjects\Business Objects....)
       When you log back into Deski via your machine, it should generate a new file is smaller size. Does this happen at all in your environment?
    Regards
    Ken

  • Tough Problem: This action cannot be completed because the other program is busy. Choose 'Switch To' to activate the busy program and correct the problem

    Please, please help us!
    We have an intermitant problem which is badly affecting a group of our users.  Can anyone help identify what SERVER this message is talking about???
    Details:  CF-19 Panasonic Tough Book, McAfee Enterprise 8.7i, Windows XP 2005 Tablet Ed. SP3. 
    Problem at login intermittantly we get a unmanagable/unresponsive window stating the following:
    Window Name:  Server Busy
    Text:  This action cannot be completed because the other program is busy.  Choose ‘Switch To’ to activate the busy program and correct the problem
    Buttons:  Switch To, Retry, Cancel (Grayed out)
    Event Viewer Message:
    Source: DCOM, Type Error,
    Description:  The server
    {D6E88812-F325-4DC1-BBC7-23076618E58D} plus others with {6B19643A-0CD7-4563-B710-BDC191FCAD3B} did not register
    with DCOM within the required timeout.
    I searched the registry for {D63.....} and found keys relating to "TCServer.exe"  Little info available.  But found 
    ((KB895953 - Memory Leak in Windows XP Tablet PC Edition )) but this seems related to a pre SP3 update....  we have SP3 installed can I still install this patch?
    I searched {6B1....} and found keys relating to "TSFManager".  Again little information available.
    How can I identify the servers with the long {XXXXXXXXX} keys, and what is tcserver.exe?
    Please help,
    Tony Heslington.

    Hi,
    If the problematic XP PC is in a domain, please provide us more information on it, such as how many DCs, member servers and the OS versions. Does the error only
    occur on one XP PC? Does the issue occur when logging on as some certain users? When did the issue begin to occur? Have you installed software, hardware or updates recently?
    Please check whether the error occurs in Clean Boot mode.
    1. Click "Start", go to "Run", and type "msconfig" in the open box to start the System Configuration Utility.
    2. Click the "Services" tab, check the "Hide All Microsoft Services" box and click Disable All (if it is not gray).
    3. Click the "Startup" tab, click "Disable All" and click "OK".
    4. Restart your computer. If the "System Configuration Utility" window appears, please check the box and click "OK".
    What is the result? For further assistance, please help gather the following information for research:
    Event log
    =========
    1. Click "Start", click “Run”, input "eventvwr" and press Enter.
    2. Expand the "Windows Logs" node on the left pane, right-click on "Application" and click "Save All Events As"; in the pop-up window, click to choose the Desktop
    icon on the left frame, input "app" in the "File name" blank, and then click save.
    3. Right click on "System", with the same method, save it as "sys".
    4. Locate the two saved log files on the Desktop and send them to us.
    Collect HiJackThis log
    ==============
    1. Please download HijackThis from the following link:
    http://www.techspot.com/download317.html
    HijackThis is a tool to collect some system settings information which is useful for further troubleshooting.
    Please Note: The third-party products discussed here are manufactured by vendors independent of Microsoft. We make no warranty, implied or otherwise, regarding
    these products' performance or reliability.
    2. Right click the downloaded “HJTInstall.exe” file and choose "Run as administrator".
    Provide administrator password or click “Allow” if you are prompted to do so.
    3. Click the "Do a system scan and save a logfile" Button.
    4. A Notepad window will appear, please click “File”, “Save As...” to save it as HJT.log (or other file name you like) on the Desktop
    and sent it to us.
    Upload these file to the following workspace.
    You can upload the information files to the following link. 
    (Please choose "Send Files to Microsoft")
    Workspace URL: (https://sftus.one.microsoft.com/choosetransfer.aspx?key=900ac54d-301d-42da-876d-4546dc81a342)
    Password: Y^dh$J1KR2u%UKL
    Note: Due to differences in text formatting with various email clients, the workspace link above may appear to be broken. Please be sure to include all text
    between '(' and ')' when typing or copying the workspace link into your browser. Meanwhile, please note that files uploaded for more than 72 hours will be deleted automatically. Please ensure to notify me timely after you have uploaded the files. Thank you
    for your understanding.
    Thanks.
    Nina
    This posting is provided "AS IS" with no warranties, and confers no rights.

Maybe you are looking for