Re: Issue With Final step re-installing drivers

I have a hp desk jet 2540 all in one trying to print with my HTC mobile android phone wireless. Set my phone up with wireless print capabilities but will not print. Had my daughter use her hp laptop to try and set it up without results.

Hello @BlessingC46, 
Welcome to the HP forums.
I understand that you are trying to print from your HTC mobile phone.
I would like to help.
You will have to make sure that the Deskjet 2540 is connected to a wireless network.
HP Deskjet 2540 and HP Deskjet Ink Advantage 2545 All-in-One Printer Series - Installing the Printer...
Once the printer is on the wireless network, you will need to install the HP ePrint app onto your phone.
Getting Started with HP ePrint Mobile Apps
Please let me know if you need any further assistance.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Similar Messages

  • Importing issues with Final Cut Pro X. Green flash and twitches while play back

    Hello, I'm having some importing issues with Final Cut Pro X and I can't find any solution whatsoever. Perhaps my importing settings are wrong?
    Anyways, I've done a lot of recordings on eye TV and HD PVR with some videos that are about 3 hours long. I exported them into H.264 files, which turns them into mpeg-4 files with AAC audio. Then I import them into final cut pro X and I notice it takes a long time for them to render the videos and I notice that there are some green screens and twitches while I play through the video.
    Here is a screenshot of the green screen that I'm talking about:
    [URL=http://imageshack.us/photo/my-images/688/screenshot20130409at338.png/][IMG]http://img688.imageshack.us/img688/4537/screenshot20130409at338.png[/IMG][/URL]
    Could it be my 2 video graphics card that is causing this kind of issues? Or is there any solution to fix this?
    In the past, I've used iMovie 09 and it worked out perfectly. However, the new iMovie 11 is terrible because it automatically optimzie my 3 hour long videos into making the importing process to (144 hours long to import). Is there any way to get iMovie 09 back or am I stuck on dealing with this Final Cut Pro X issues?
    More information:
    My Hauppauge HD PVR settings are set to custom. Video Constant Bit Rate, the average bit rate: 13.5 Mbps. The audio is AAC.
    My project settings for video properties is set to custom, 720P HD Format, 1280 x 720 Resolution and 30P Rate. The audio and render properties is set to custom, audio channels is stereo, audio sample rate is 48kHz and the Render Format is Apple ProRes 422.
    I export the video as a quicktime movie. The export setting is H.262.
    The summary of the export is:
    File type: Quicktime movie
    Estimated size: 397GB
    H.264, Width and height: 1280 x 720. Framte rate: 30 fps

    My Hauppauge HD PVR settings are set to custom. Video Constant Bit Rate, the average bit rate: 13.5 Mbps. The audio is AAC.
    My project settings for video properties is set to custom, 720P HD Format, 1280 x 720 Resolution and 30P Rate. The audio and render properties is set to custom, audio channels is stereo, audio sample rate is 48kHz and the Render Format is Apple ProRes 422.
    I export the video as a quicktime movie. The export setting is H.262.
    The summary of the export is:
    File type: Quicktime movie
    Estimated size: 397GB
    H.264, Width and height: 1280 x 720. Framte rate: 30 fps

  • During the final step of installing after download, I get an error - The Installer encountered an error that caused installation to fail.

    During the final step of installing after download, I get an error - The Installer encountered an error that caused installation to fail.

    Nobody can tell you anything. You have not provided any proper system information or even told us what you are actually downloading.
    Mylenium

  • Compatibility issues with Final Cut Express and Final Cut Pro

    I'm getting ready to edit a project and I was wondering if there are any compatibility issues with Final Cut Express and Final Cut Pro. I've never used Express put I assume I would be able to make cuts, simple effects and titles. Is this correct.
    If I transfer project files from one platform to the other will i run into any issues?
    Thanks for all and any help.

    {quote:title=cuttingedge wrote:}
    If I transfer project files from one platform to the other will i run into any issues?
    {quote}
    Although they operate in a similar fashion that are not fully compatible. You can open a FCE project in FCP, but once you've edited it in FCP you can't go back to FCE.

  • Issue with GEAR Software CD/DVD Drivers + Windows Vista Beta 2 (build 5384)

    I am using Windows Vista Beta 2 (Build 5384), and yes I know Vista is NOT officially supported by iTunes yet. However, iTunes installs and works ok for me, except that there is an issue with the GEAR Software drivers that it installs (used for cd burning and importing). The issue is that the driver (GEARAspiWDM.sys) is not compatible with Windows Vista. Normally this would not be an issue; I would just use a different program to create audio cd's. The issue is that the drive makes both my DVD-Rom and my DVD/CD-RW drive disappears (they are still listed in the device manager, but they have driver errors, code 39).
    So I was wondering if anyone in Mac/Apple land knows of a way to disable/uninstall the GEAR drivers so I can still use iTunes?
    And yes I did search the GEAR Software support page, but could not find an appropriate solution.
    Thank you.
    Chuck Stewart

    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    iTunes for Windows: "Registry settings" warning when opening iTunes

  • Issue with schema publishing after installing Universal Records Management

    Installing URM over Content Server has been by far the most random experience I've had so far with any technology... Out of 6 installation attemts of URM, only 1 has been entirely successful.... with no errors.... the rest have errors that makes it impossible to work with the product... The funny thing is that the installation is nothing more than the installation of two components via Component Manager, with a few non-important options in the middle that have always been set to the same value...
    First of all, in the installation guide of URM there are no mentions of required avaliable space in the Database Tablespace (idc_system) and in about half of our attempts (yes the other half didn't generate issues with this...) the 300Mb Tablespace filled up and caused the installation to pause until I added another datafile to that tablespace.
    Secondly, the error that is a constant present in all failed installations is this one:
    Unable to publish the schema. Unable to publish the view 'MediaTypes_View' with relationship 'ObjectTypes_MediaTypes'. Failed to append row. Mismatched number of columns in data result set [ Details ]
    An error has occurred. The stack trace below shows more information.
    !csSchemaUnableToPublish!csSchemaUnableToPublishView2,MediaTypes_View,ObjectTypes_MediaTypes!syFailedAppendRow
    intradoc.common.ServiceException: ! csSchemaUnableToPublishView2,MediaTypes_View,ObjectTypes_MediaTypes
         at intradoc.server.schema.StandardSchemaPublisher.publishViewRelationshipFragments(Unknown Source)
         at intradoc.server.schema.StandardSchemaPublisher.publishViewValues(Unknown Source)
         at intradoc.server.schema.StandardSchemaPublisher.doPublishing(Unknown Source)
         at intradoc.server.schema.StandardSchemaPublisherThread.run(Unknown Source)
    Caused by: java.lang.Error: !syFailedAppendRow
         at intradoc.data.DataResultSet.addRow(Unknown Source)
         at physicalcontentmanager.PhysicalContentManagerFilters.customizeMediaTypeSchema(PhysicalContentManagerFilters.java:688)
         at physicalcontentmanager.PhysicalContentManagerFilters.doFilter(PhysicalContentManagerFilters.java:114)
         at intradoc.shared.PluginFilters.filter(Unknown Source)
         at intradoc.server.schema.StandardSchemaPublisher.publishViewRelationshipFragment(Unknown Source)
         at intradoc.server.schema.StandardSchemaPublisher.processViewRelationshipPath(Unknown Source)
         at intradoc.server.schema.StandardSchemaPublisher.publishViewRelationshipFragmentsForView(Unknown Source)
         ... 4 more
    This error appears immediatly at the end of the server's first startup, just after all database changes are done upon installing URM. This last attempt I actually went to check the Content Server logs before I tried to login to the instance just to be sure that I wasn't responsible in any way for creating this error, and as I expected it was already there, since this relation is created by one of the Records components.... This error is a product of the URM installation itself and makes it impossible to run any Check-Ins or searches, due to the non-working relation causing Javascript errors which don't allow the forms to load values into any drop-down lists...
    We also register every "move" we make during installations, and as we reviewed what we did we feel we did exactly the same steps (it's not that hard in a one-click installation process...), why only ONE of the installations went okay we're entirely clueless about.... What we do know is that we seriously need this issue fixed, not only is it costing us a ridiculous ammount of time in "attempts" but come on.. this issue shouldn't really exist in a public release... unless we're the only ones being affected by it?
    On a side note, the URM installation was done over a "fresh" component-clean installation of Content Server, so there was nothing of our own custom components that could interact incorrectly with a component of the URM installation.
    If anyone has seen this issue before, please write something here. Thanks in advance,
    - Tiago Dias
    Message was edited by:
    user602700
    Message was edited by:
    user602700

    you should issue a support ticket yourself and get a SR number... that's probably faster than going through the sales guy.
    I'd suggest turning on the "schema" trace section, make it verbose, and restart. You may need to disable all component (including URM) before doing this.
    Something is wrong with the "MediaTypes_View" definition file, which is here somewhere:
    contentserver/data/schema/views/
    just not sure what...

  • Issues with CWLMS 3.2 Install Server 2008

    Hi,
    I am trying to install CWLMS 3.2 on Server 2008 SP2 - I have installed succesfully but when i try and login it asks for username and password which i fill out correctly and then just hangs and does nothing, it seems to be an issue with port 443 or redirection.
    Please help
    Thanks
    Rich

    Sounds like CSCtb17186 http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtb17186
    that Joe mentioned in https://supportforums.cisco.com/message/676256#676256

  • Issue With Report Builder After Installing SP3 for SQL 2008 R2

    Hello.  We are experiencing an issue with Report Builder 3.0 since installing SP3 for SQL 2008 R2 over the weekend.  You can no longer launch Report Builder from the Reporting Services URL (http://dicomweb/ReportServer/ReportBuilder/ReportBuilder_3_0_0_0.application
          Server  : Microsoft-HTTPAPI/2.0
          X-AspNet-Version: 2.0.50727
     Application url   :
    http://dicomweb/ReportServer/ReportBuilder/RptBuilder_3/MSReportBuilder.exe.manifest
          Server  : Microsoft-HTTPAPI/2.0
          X-AspNet-Version: 2.0.50727
    IDENTITIES
     Deployment Identity  : ReportBuilder_3_0_0_0.application, Version=10.50.6000.34, Culture=neutral, PublicKeyToken=c3bce3770c238a49, processorArchitecture=x86
     Application Identity  : MSReportBuilder.exe, Version=10.50.6000.34, Culture=neutral, PublicKeyToken=c3bce3770c238a49, processorArchitecture=x86, type=win32
    APPLICATION SUMMARY
     * Online only application.
     * Trust url parameter is set.
    ERROR SUMMARY
     Below is a summary of the errors, details of these errors are listed later in the log.
     * Activation of
    http://dicomweb/ReportServer/ReportBuilder/ReportBuilder_3_0_0_0.application resulted in exception. Following failure messages were detected:
      + File, Microsoft.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
    COMPONENT STORE TRANSACTION FAILURE SUMMARY
     No transaction error was detected.
    WARNINGS
     There were no warnings during this operation.
    OPERATION PROGRESS STATUS
     * [10/15/2014 9:35:56 AM] : Activation of
    http://dicomweb/ReportServer/ReportBuilder/ReportBuilder_3_0_0_0.application has started.
     * [10/15/2014 9:36:29 AM] : Processing of deployment manifest has successfully completed.
     * [10/15/2014 9:36:29 AM] : Installation of the application has started.
     * [10/15/2014 9:36:31 AM] : Processing of application manifest has successfully completed.
     * [10/15/2014 9:36:35 AM] : Found compatible runtime version 2.0.50727.
     * [10/15/2014 9:36:35 AM] : Detecting dependent assembly Sentinel.v3.5Client, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a, processorArchitecture=msil using Sentinel.v3.5Client, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a,
    processorArchitecture=msil.
     * [10/15/2014 9:36:35 AM] : Detecting dependent assembly System.Data.Entity, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, processorArchitecture=msil using System.Data.Entity, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089,
    processorArchitecture=msil.
     * [10/15/2014 9:36:35 AM] : Request of trust and detection of platform is complete.
    ERROR DETAILS
     Following errors were detected during this operation.
     * [10/15/2014 9:36:43 AM] System.Deployment.Application.InvalidDeploymentException (HashValidation)
      - File, Microsoft.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
      - Source: System.Deployment
      - Stack trace:
       at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, Hash hash)
       at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, HashCollection hashCollection)
       at System.Deployment.Application.ComponentVerifier.VerifyComponents()
       at System.Deployment.Application.DownloadManager.DownloadDependencies(SubscriptionState subState, AssemblyManifest deployManifest, AssemblyManifest appManifest, Uri sourceUriBase, String targetDirectory, String group, IDownloadNotification
    notification, DownloadOptions options)
       at System.Deployment.Application.ApplicationActivator.DownloadApplication(SubscriptionState subState, ActivationDescription actDesc, Int64 transactionId, TempDirectory& downloadTemp)
       at System.Deployment.Application.ApplicationActivator.InstallApplication(SubscriptionState& subState, ActivationDescription actDesc)
       at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
       at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
    COMPONENT STORE TRANSACTION DETAILS
     No transaction information is available.

    Hi DMcGarveyt,
    This is an known issue in SSRS 2008 R2 SP3. For this issue, Microsoft has published an article addressing this issue. It is not planning to release a fix for this defect. But there's workarounds for this issue. Please refer to the link below:
    Report Builder of SQL Server 2008 R2 Service Pack 3 does not launch.
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

  • Is my issue with Final Cut Pro or my Macbook pro?

    I'm going to try to be as thorough as possible in explaining my situation because I can't figure this problem out and it's exhausting me. I have an early 2011 macbook pro with the 2.2 ghz processor. I upgraded to 16gb of ram almost a year ago. I've been using Final Cut Pro 7 on this computer for several years now without issue and have made no setting changes that would prompt my problems. A few months ago my battery decided to stop holding a charge and now just registers 0%. Around the same time, while editing a short video my computer began behaving like it was overheating. It would crash, restart, crash and then restart again. After I did a disk and permissions repair it began to work normally again and I haven't had any more crashing issues. Around this period of time I began noticing that when my computer turns on it doesn't register the correct time and date. Given a few moments it corrects itself, but for some strange reason it was doing that every time.
    Anyway, around that time I tried to upgrade to Mavericks and experienced an issue during installation because my hard drive was apparently damaged in some way and the installation couldn't be completed. I restored my previous OS and tried to carry on as I was with the damaged hard drive for as long as I could. I was still able to do everything I needed on the computer. I could still edit videos with Final Cut. I could still browse the internet. I could still stream Netflix.
    About a month ago Final Cut stopped working. I could open the program, start a new project and import media files, but when I dragged them into the timeline, they just stuttered (audio would play but video would lag and then jump several frames then lag and jump frames). At the time I assumed this was because my hard drive finally gave up, but I was still able to do other functions like browse the internet and stream basketball games with nba league pass (granted they weren't crisp hd - on a side note, netflix was also behaving oddly. when I would browse through my list, it wouldn't stop scrolling when I moved the mouse away.) so I assumed the hard drive was my issue.
    I just replaced my hard drive with an ssd (crucial m500) and upgraded to mavericks (10.9.1) and now I am having the same issues. Netflix behaves fine. Basketball games stream fine. My battery is still dead (obviously that wasn't going to change). I get the wrong date and time for a minute, but I'm thinking that's battery related now. But Final Cut still lags to the point where I can't use it. Video clips also won't render. I thought this might be an issue with the Final Cut program so I uninstalled it and reinstalled it, but it still did the same thing. Assuming I hadn't correctly/completely uninstalled it, I downloaded HitFilm 2 (an editing program that had a free download promotion at the time), figuring using a different program, if i could edit video with it, then my issue is with Final Cut and not my computer. Unfortunaely, I'm having the same lagging issues with HitFilm as I was with Final Cut.
    I'm at a loss as to what the problem is. Sorry if this was a rambling post, but I wanted to get as much of the background out there as possible, should it provides anyone with a clue as to what is the issue here. Does anyone have any idea what could be at fault here? I'm stumped.

    Hardware Information:
              MacBook Pro (15-inch, Early 2011)
              MacBook Pro - model: MacBookPro8,2
              1 2.2 GHz Intel Core i7 CPU: 4 cores
              16 GB RAM
    Video Information:
              Intel HD Graphics 3000 - VRAM: 512 MB
              AMD Radeon HD 6750M - VRAM: 1024 MB
    System Software:
              OS X 10.9.1 (13B42) - Uptime: 5 days 3:30:18
    Disk Information:
              Crucial_CT480M500SSD1 disk0 : (480.1 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        SSD (disk0s2) /: 479.11 GB (235.88 GB free)
                        Recovery HD (disk0s3) <not mounted>: 784.2 MB
              MATSHITADVD-R   UJ-898 
    USB Information:
              Apple Computer, Inc. IR Receiver
              Apple Inc. FaceTime HD Camera (Built-in)
              Apple Inc. Apple Internal Keyboard / Trackpad
              Apple Inc. BRCM2070 Hub
                        Apple Inc. Bluetooth USB Host Controller
    FireWire Information:
    Thunderbolt Information:
              Apple Inc. thunderbolt_bus
    Kernel Extensions:
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
              [System] com.adobe.fpsaud.plist 3rd-Party support link
              [System] com.bombich.ccc.plist 3rd-Party support link
    Launch Agents:
    User Launch Agents:
              [not loaded] com.divx.agent.postinstall.plist 3rd-Party support link
    User Login Items:
              iTunesHelper
              Dropbox
              WDQuickView
    Internet Plug-ins:
              FlashPlayer-10.6: Version: 12.0.0.44 - SDK 10.6 3rd-Party support link
              OVSHelper: Version: 1.1 3rd-Party support link
              Flash Player: Version: 12.0.0.44 - SDK 10.6 3rd-Party support link
              QuickTime Plugin: Version: 7.7.3
              DivXBrowserPlugin: Version: 2.2 3rd-Party support link
              Default Browser: Version: 537 - SDK 10.9
              Silverlight: Version: 5.1.10411.0 - SDK 10.6 3rd-Party support link
              iPhotoPhotocast: Version: 7.0 - SDK 10.8
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 1.9 - SDK 10.9
              AppleAVBAudio: Version: 2.0.0 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    3rd Party Preference Panes:
              DivX  3rd-Party support link
              Flash Player  3rd-Party support link
    Bad Fonts:
              None
    Old Applications:
              SLLauncher:          Version: 1.0 - SDK 10.5 3rd-Party support link
                        /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
              WFTPairing:          Version:  - SDK 10.4 3rd-Party support link
                        /Applications/Canon Utilities/EOS Utility/WFTPairing.app
              Nisus Thesaurus:          Version: 1.1 - SDK 10.4 3rd-Party support link
    Time Machine:
              Skip System Files: NO
              Auto backup: YES
              Volumes being backed up:
              Destinations:
                        Time Machine Backups [Local] (Last used)
                        Total size: 931.16 GB
                        Total number of backups: 2
                        Oldest backup: 2013-04-15 00:34:39 +0000
                        Last backup: 2014-01-22 03:55:49 +0000
                        Size of backup disk: Excellent
                                  Backup size 931.16 GB > (Disk size 0 B X 3)
              Time Machine details may not be accurate.
              All volumes being backed up may not be listed.
    Top Processes by CPU:
                   4%          WindowServer
                   3%          EtreCheck
                   0%          ps
                   0%          aosnotifyd
    Top Processes by Memory:
              180 MB          Safari
              164 MB          Finder
              164 MB          com.apple.IconServicesAgent
              115 MB          PluginProcess
              105 MB          com.apple.WebKit.WebContent
    Virtual Memory Information:
              11.22 GB          Free RAM
              2.77 GB          Active RAM
              296 MB          Inactive RAM
              1.71 GB          Wired RAM
              782 MB          Page-ins
              0 B          Page-outs

  • Issue with Final Cut Pro 7 and Maverick OS.

    I wanted to know if anyone was having issues with the new OS X 10.9.4 and Final Cut Pro 7 Studio? Are there any other solution other than purchasing new editing software?

    I have FCP 7 running successfully on Mavericks 10.9.4 - although I mainly use Premiere Pro/Adobe CC now.
    MtD

  • Sync issues with Final Cut

    Been browsing around the Intertubes for a few days, and can't seem to find the answer for which I'm looking.
    I'm an assistant editor at a small post house, and have had issues with media getting out of sync after having been captured. This is not another DV media sync question; I've had it occur on material being digitized from a Sony DVW-500 Digital Beta deck through an AJA Io I/O card, using RS-422 controller and the "Capture Clip" setting, not going through Capture Now.
    The worst I personally have dealt with has been 1 or 2 frames of difference between audio and video, but it's very frustrating, especially when dealing with spot reels. Some of my compadres are telling me horror stories about large scale QT movies getting out of sync. However, this was a feature-length movie that we were importing, and the suspicion is that the partitions on our RAID array were causing problems (drives getting too full, etc.).
    Can anyone help?

    t looks out of sync with lips, but when I've slipped it back or forward manually, it gets back in sync, both on layback of masters and in timelines.< </div>
    Put a copy of the clip into a timeline, separate the audio from the video, get properties on each. Are they different lengths? If so, just adjust the length of the audio to match the video using Speed. If it's just one or two percent, there will be no discernible difference when the audio re-renders.
    What's the source of the clips? If it's a Canon camera, no that Canon uses a weird DV codec and this has been a problem since, like, forever.
    bogiesan

  • Import issues with Final Cut Express HD

    I shot video with a Nikon AW100 and made a quick video and everything worked fine.
    The next day, I tried importing more clips for another video and it crashed every time. No settings were changed on the camera or software.
    I trashed Final Cut, reinstalled it and got the same issue.
    I installed it on another Mac with the same problem there as well.
    Can anyone help me with this?

    Some info, please ...
    What versions of OS X and FCE are you using?   Exactly what model Mac are you using?
    What settings did you use in your camera when you shot the video that worked?  That didn't work?
    What Easy Setup are you using in FCE?
    A few things that may be contributing factors ...
    Only FCE 4.01 on an Intel Mac supports AVCHD video
    However your camera (the AW100) may not exactly be an AVCHD camera ...  it shoots MPEG4/AVC H.264 which is not quite the same as AVCHD
    FCE does not work with H.264 video; the video needs to be transcoded to QuickTime/Apple Intermediate Codec to be used in FCE (before being imported into FCE)
    Two of the shooting modes in the AW100 are not supported in FCE:  1080p and iFrame

  • Issue with SQL Agent when install SCOM 2012 R2

    Hi all,
    i'm try to install SCOM 2012 R2 with all components (Mgmt Server, Operation Console, Web Console, Reporting Server)
    Everything is fine, except Reporting Server. I have attached the picture below
    I have also check the SQL Server Agent in SQL Server Configuration Manager. It has already started. But... i dont know why?
    Is there anyone know what wrong it is??

    Many thanks Gautam,
    i have checked again in Repoting Services Configuration Manager & change the database to the local SCOM
    Cause i'm using database for management server, dataware house on SCCM. So reporting service automatic set the database on SCCM also.... :(
    So now i will show everyone who try to install SCOM
    For the Management & DatawareHouse database --> you could install on any SQL Server (open port 1433)
    For the Reporting Services:
    On the local SCOM, install SQL Server with these components (SQL Engine: SQL Agent; SQL Reporting)
    After install SQL successfully, login to the Reporting Services Configuration Manager to set:
    First, create the new database on local SCOM
    Second, Web Service URL. login to the IIS to create self-signed certification for own SCOM. then turn back too Web Service URL to create SSL Certification
    Set SQL Agent service to Automatic, then start
    so, that's all. I'm crazy with this issue for a whole day :)

  • Issue with the steps in adding the ticket number in the ERMS email

    CRM 5.0  SP09
    Read the CRM expert article written by John Burton to add a ticket automatically to an email reply and was able to get it to work. (had to apply note 954060 to get the variable in the mailform)
    But in our normal processing steps the ticket number hadn't been created and was looking for a way to generate the number.
    Normal steps.
    1. Inbox - select Emails in process, select one and interact.
    2. Confirm BP or create a BP and confirm.
    3. Choose Email from nav bar and reply.  the ticket number is not filled i.e.
    If I change the steps to
    1. Inbox - select Emails in process, select one and interact.
    2. Confirm BP or create a BP and confirm.
    3. Select interaction record and save (service ticket # shows)
    4. Choose Email from nav bar and reply.  and value fills in.
    Is not a major issue, but users are always looking to reduce the number of clicks for the agents as they are being converted from using Outlook to ICWC for email repsonses.
    Thanks,
    Glenn

    Hi Glenn,
    I am not sure that I (or other readers) may fully undestand the issue, so I want to clarify a couple of points.
    It is not quite clear to me whether the emails that you are processing in the Agent Inbox are replies from customers (which already contain an ERMS tracking thread) or whether they are new emails?
    I will assume that they are new emails. Also, I understand (from previous message threads) that you are using the Service Ticket as your leading business transaction, rather than the Interaction Record? Is this the case? If so, it is important to point out in such threads since the default process used by most customers to create an interaction record as the leading object and then create a service ticket in cases wehre followup investigation is necessary.
    In the normal proces flow, an interaction record is automatically created once a business partner is confirmed. So, in order to create a service ticket (and have the service ticket thread be automatically inserted into an email as a tracking thread) you first need to navigate to the Service Ticket screen (which results in the creation of a service ticket).
    But I am assuming, as mentioned, that in your case you are using the Service Ticket as the leading object? Does anything show up in this "Interaction Record" view in the lower-right-hand corner of the email editor currently? If so, maybe the problem then is that you need to replace the Interaction Record view inside the Email Editor screen with the Service Ticket view instead? This could be causing the problem that the non-existant Interaction Record is being set as the current One Order object instead of the Service Ticket. This is really jus a guess on my part, but maybe worth checking.
    See also SAP notes 1032743, 1169373, 1157402
    Warm regards,
    John

  • Small issue with media player after install of 4.5 OS

    I have the BB Curve 8330 and recently upgraded the OS to the new 4.5.0.56
    So before the upgrade I could be listening to tunes and when a call or email or message came in the tunes would only stop during the notification. Now however the tunes will not restart and I have to manually navigate back to the media player.
    Is there a setting somewhere that I can not find or am I stuck with this now?
    Solved!
    Go to Solution.

    Unless your sitting BEHIND your monitor it's OUR left
    (Muppets line; the bear is driving Kermit is navigating) Bear left!.....right FROG!!
    Okay I couldn't resist.
    Let me try some searches.
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Maybe you are looking for