Re: Qosmio F30-141: Is PA3237U-1ACA adapter compatible?

I've got a Toshiba Qosmio F30-141. Its AC adapter (PA3237E-3AC3) is out of function. May I use PA3237U-1ACA instead?

Hi mkarabal,
Just compare the specifications of both AC/DC adaptor. If both adaptors have the same voltage and the same or a higher ampere, you can use the other AC/DC adaptor too.
As you can see, voltage must be the same, just the ampere must be the same or higher.
So I agree with MisterX. You can use the new adaptor! :)

Similar Messages

Where can I buy motherboard for Qosmio F30-141

where you can buy a motherboard for Toshiba QOSMIO F30-141?

Hi mate
You need a special board which has been designed especially for the Qosmio F30-141.
Such motherboards and all compatible parts can be purchased from the Toshiba ASP in your country.
Here you can find the ASP:
http://eu.computers.toshiba-europe.com -> Support & Downloads -> Find an Authorized Service Provider

Questions about Qosmio F30-141 and OS

hi!
I plan to get notebook Qosmio F30-141, but after purchase I wish to replace operational system on Linux Fedora Core and with it would like to learn, whether are correctly supported by the given operational system this model (support wi-fi especially interests), or you recommend other model?!?
thank's

The problem could be that the Toshiba does not support any Linux drivers and you will have to search in internet and on 3rd party websites for compatibles and supported drivers!
Furthermore the Toshiba notebooks support many Tools and Utilities which enables the notebook features.
I presume you will be not able to use such features like FN keys for example

Qosmio F30-141 Memory Stick DUO / cardreader problem

I have a problem with Memory Stick Duo Adapter/Memory stick PRO DUO card.
Computer don't recognize volume. Device Memory Stick appear in the system, but when I click on it in the explorer, computer say "Insert disk into drive E". I have Original Memory Stick PRO DUO card 2gb and MS Duo Adapter. Computer every 30 sec try connect this card.
Computer properly work with Memory Stick Pro Card 1Gb and with Memory Stick M2 Card 1Gb with M2 adapter.
all this cards work in my Photo and on another computer.
I try to connect this card through Sandisk 6 in 1 PCMCIA adapter, but in this case no one card works.
This device appear in IDE ATA/ATAPI Controllers as "____________Memory_Card_Adapter_II" but driver for this device is not installed (KODe 28).

Thanks to the wonderful internet world for this info:
The F30-141 does not support the memory stick pro duo and any adaptors was not tested.
I afraid also the usage of any adaptors wills not help.
I have bought a external card reader. Its a small device and was not very expensive and the best is that this external card reader supports most cards ;)

Re: Need mainboard for my Qosmio F30

Hi! I think it is standard problem- overheating GPU. I can remove motherboard by myself.
Where can I find Motherboard for Toshiba Qosmio F30-141 FUHSY2 A5A001825130?

Hello
I assume that Ika7 has already bought a new mainboard because the thread is from February 2009.
As Raver posted you have two possibilities:
-eBay (second hand)
-Authorized Service Provider (new part)
Furthermore the ASP can exchange the mainboard for you because its a little bit tricky and you have to remove a lot of screws.
Greets

Second HDD in Qosmio F30

How to install second HDD to Qosmio F30-141? Need some adaptor?

I dont think you will need a select bay adaptor.
I found one HDD PA3439U-2HA0 which could be compatible with the F30.
Its an S-ATA 5400rpm HDD and was designed to operate as a primary HDD or a second removable HDD in the Slim Select Bay drive of your notebook.
The second HDD bay should be placed at the bottom of the unit and should be secured only with one screw.

64-bit RAID drivers problem on Qosmio F30 during WinXP installation

I am trying to install Windows XP 64-bit on my Qosmio F30-140, so I used Windows Vista 64-bit RAID drivers. The windows setup loaded the drivers successfully from USB-FDD, but after I choose C: partition to install the windows and the setup started I got the following message " Setup cannot copy the file: KR10N64.sys ".
Please advise .

download the driver again and try to put it on another clean formated floppy disk
put all the files on the root of the floppy disk
and try to reply to this message ;)
Message was edited by: Reaver

Qosmio F30 - no sound on Windows XP Pro

hello,
first i have install Windows XP MCE, but few day ago i install Windows XP Profesional edition, and lose sound in my notebook.
What was happen?
How I can fix that?
Someone say that is becouse Qosmio F30 cannot support Profesional edition. Truth?

Hi
The notebook support Win XP MCE and XP Pro!
The XP MCE supports some additional features but its the same OS!
I think you should firstly check if the sound driver was properly installed (check device manager). Check the sound volume control and the sound settings in the control panel!
Do it!

Windows Vista Update posts 64bit driver for Qosmio F30 32bit Vista

Hello
Today I've noticed that Windows Vista update is posting the wrong update for one of Qosmio F30 drivers.
I have Windows Vista 32Bit but Windows Update post a 64bit version of the driver.
see the screenshot [Here|http://imagefilehost.googlepages.com/f30Wrongupdate.jpg]
Any idea?

hmm... this is strange ?:|
The Toshiba x64 ACPI compliant driver means definitely a 64bit version!!!
I dont know why the Vista driver update notification reports an 64bit driver for a 32bit OS but usually the 64bit driver shouldn't be compatible with the 32bit OS.
However, the case seems to be clear dont install it if the driver is not designed for your OS.
Regards

Qosmio F30: How to: Manual Installation Of Windows Xp Media Center Edition 2005

Manual Installation Of Windows Xp Media Center Edition 2005 On Toshiba Qosmio F30 Laptop
Last Update 3 Oct 2006
Important Notes Before You Start:
1-These Steps Used For "Toshiba Qosmio F30" And For Other Qosmio Models That Comes With "Intel Centrino Duo" Cpu's And With Xp Media Center 2005 Installed.
2-Apply These Steps If You Have Previous Experience In Installing Windows Xp , If You Don't Have That Experience , Then You Can Use The Supplied Recovery Cd To Restore Your System.
3- Windows Xp Media Center Cd's Are Not Supplied With Your Laptop, If You Want To Get The Cd's You Can Buy It From Many On-Line Shops And If You Do So You Will Get Valid Windows Xp Product Key Which You Will Not Need It (Because You Already Have One You Can Find It In A Small Sticker In The Back Of Your Laptop And You Can Activate Your Windows With It).
In Other Words ( You Need The First And The Second Cd Of Windows Xp Mce 2005 SP2 Oem).
4- Do Not Try To Apply These Steps On Other Versions Of Windows Xp , Use "Windows Xp Media Center Edition 2005 Sp2 Oem" Only
5- You Must Have Usb Floppy Drive To Install "Toshiba Raid Controller" , It Can Be Installed Only By Having The Driver On a Floppy Disk And By Pressing F6 During The Installation Of Windows Xp, If You Do Not Install The Raid Driver Then Windows Xp Will Not Recognize Your Hard Disk.
6- Disclaimer of liability
I shall not be responsible or liable, directly or indirectly for any damage or loss caused or alleged to be caused by or in connection with the use of the this site or its content, including but not limited to delays, omissions, and inaccuracies in its content.
Steps:
1- Create Drivers Cd From "Toshiba Assist Utility" ,You Should See The Toshiba Assist Icon On The Desktop, Then In The Toshiba Assist Choose The 'protect & Fix' Tab ,There You Will Find The Option `Create Drivers & Tools Cd` And Insert a Blank Cd To Write It
"If This Option Did Not Work Then You Have To Install The Restore Cd To Get It Work" , The Drivers Are Installed In A Folder Called Toolscd In "C:" Drive. To Install Your Recovery Cd Power On Your Laptop And Hold "F12" And Use The Arrow Keys To Choose Cd-Rom Icon To Boot From the Cd.
2- Create Toshiba Raid Driver From The Drivers Cd, The Toshiba Raid Driver Has To Be Added During The Installation of Windows XP When Asked To "Press F6 If You Need To Install A Third Party SCSI Or Raid Driver".
In Order To Do That , Insert The Drivers Cd "from Windows " It Will Run Automatically Or Run "Browser.Exe" Inside The Cd The Select "Raid Driver" And Click On "Installation" Button, It Will Show You The Raid Driver files , Insert A Blank Floppy And Copy The Files Into The Floppy "Be Sure That All The Files Be On The Root Of The Floppy" or download the Toshiba RAID driver from the Toshiba driver download web page and extract the zip file to a floppy disk."Again, All The Files Should Be On The Root Of The Floppy Not Inside A Folder"
3- Connect Your Usb Floppy Drive And Insert Your Windows Xp Mce 2005 Cd 1 And Power On Your Laptop Hold "F12" And Use The Arrow Keys To Choose Cd-Rom Icon To Boot From The Cd.
When You Get The Message To "Press Any Key To Boot From Cd...", Press Any Key , If You Do Not Press Any Key, It Will Not Boot From Cd-Rom,Press F6 When Asked To "Press F6 If You Need To Install A Third Party Scsi Or Raid Driver".
The Setup Continues Until You Are Asked Whether You Want To "S = Specify Additional Device". Press 's' And Specify The Toshiba Raid Driver For Xp. Then Press 'enter' To Continue With The Installation.
Do Not Upgrade Your Xp Installation ,Start New Windows Installation And Partition Your Hard Disk , Windows Installation Will Ask You To Insert Cd 2, And Will Copy Some Files And Will Ask You To Insert Cd 1 Again ,Continue The Setup Until Windows finish The Insallation.
4- After Windows Finish The Installation Insert Drivers Cd And Select "Microsoft Updates" From The Drivers Cd Click On"Installation Button" ,Click "Qfe" And Install ONLY the Following Updates (Do Not Let The Updates Restart Your PC Until You Finish The Installation of All Updates)
A- Q896256
FIX "Computers That Are Running Windows Xp Service Pack 2 And That Are Equipped With Multiple Processors That Support Processor Power Management Features May Experience Decreased Performance"
B-Q910437
FIX "High Hit Count Watson Crash In Wu Client"
C-Q889673
FIX "Hardware (Dep)-Enabled Computer May Unexpectedly Quit After You Resume From Standby Or From Hibernation In Windows Xp Service Pack 2"
D-Q896243 (Very Important ,This Will Make SD And MMC Cards To Work)
FIX "ADD Support The High Speed SD Card"
Other Updates Are Not Necessary To Install, Because You Will Install It Later When You Run Microsoft Updates From Microsoft Updates Web-site After You Finish Activating Your Windows.
5- download and run "Intel(R) Chipset Software Installation Utility" from Intel website
(Restart Your PC After You Finish The Installation)
Do Not Install "Chipset Driver" From The Drivers Cd , It Is An Old Version , Try To Install The Latest From The Link Above.
6- Install The "Display Driver" From Drivers Cd (No Need To Restart).
Note : To Avoid Annoying Messages During Drivers Installation Try To Do The Following:-
Go To Control Panel , System Properties , Hardware , Drive Signing , Select "Ignore - Install The Software...."
Go To Control Panel , System Properties , Hardware , Windows Update , Select "Never Search Windows Update For Drivers"
7- Now You Have To Setup Your Internet Connection and Activate Your Windows So That You Can Run "Windows Updates" From Microsoft Windows Update Website
Your Internet Connection May Need One Of The Following Drivers (Depending On Your Modem)
A- If You Your Internet Connection Through LAN Then Install The "Network Driver" From Drivers Cd.
B- If You Your Internet Connection Through Wireless Then Install The "Wireless Network Driver" From Drivers Cd.
C- If Your Internet Connection Through USB Then Install The Driver Supplied By Your Modem Manufacturer.
D- If Your Internet Through Dial-Up Then Install The "Sound Driver" From Drivers CD , This Driver Will Install The Sound Driver And Will Activate The Modem Device and ,A Message Appeared "Find New Hardware ,Modem Device" Ignore The Message And Restart Your PC Then Install "Modem Driver" From Drivers Cd.
8- Now Go To Windows Update Web-Site And Install All The Necessary Updates "Try To Run Windows Updates Several Times Until You Install All The Updates Because In The First Time, Windows Updates Website Will Install 3 Files Only After That Restart Your Computer And Go To Windows Updates Site Again And Continue To Install The Updates , Select Custom Updates Method And Install All The Critical And Optional Updates".
9- install "Common Modules" from drivers CD This module is an essential component on Windows XP systems It is required to make other TOSHIBA original programs work properly.
10- Now Continue To Install Other Drivers And Utilities From Drivers Cd But Do Not Install The Following Drivers:-
Atheros Client Utility " No Need"
Bluetooth Monitor " Do Not Install This , Install Only The "Bluetooth Stack".
Enjoy Your Powerful Toshiba Qosmio Laptop.

you can see this tutorial also in this website
salah.coms.ph

Need RAID Driver for 64-bit WXP - Qosmio F30

Hi everyone..
I'm looking tor Raid driver for winXp x64 bit...
My laptop is Qosmio F30-140
Please help me to find it..
Thanks for help..
Salam

Hello
I Have RAID Driver for Windows Vista x64
http://cdgenp01.csd.toshiba.com/content/support/downloads/raid011016vista_os2007087a.exe
try it on XP 64 i think it will work
Reaver

Qosmio F30 starts with blue stripes during the start screen of Vista

My Qosmio F30-114 runs since years without Problems with Vista Ultimate.
Since some Days there is a huge Problem.
The Qosmio starts with blue stripes during the start screen of vista.
So I deleted the driver of the graphic card and used the standard vga card driver. the hardware assistent found a driver on the system.
For a short moment i was very lucky.
After a restart, there was a blue screen. after the next restard, again the standard vga card driver.
What can i do?
The download section of toshiba has no drivers for graphic card.
And really ... i wonder - how does it works all the years without problems...
Has anyone a solution?
thanx
toshibalover ;-)

Hi!
First of all do you have this issue on an external monitor too or only on the internal monitor? Maybe its not a problem of the graphic card so check this with an external monitor.
I have checked the Toshiba website and there I can find some drivers for the Qosmio F30:
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
Bye

Qosmio G30-141: Want to change Windows language from Russian to English

I have Toshiba Qosmio G30-141 series. I have bought it in my homeland. Here all Toshibas are in Russian. I want in English. Please help me to convert my Windows language. I need MUI for Windows Media Center.
Please help me for converting my language. I can format and to put windows Xp pro English, but in this time i will not able to use TV tunner and other services. Please help me or someboady have DVD boot cd in English
Message was edited by: ilyasn

Hey Ilyas
Unfortunately, there is no much to do. The OS language cannot be converted!!!
If you want to use the Windows in English language you will have to buy the original Microsoft Windows CD with a English version of Win MCE.
Then you have to install this OS and the necessary drivers from the Toshiba driver page.
The drivers can be chosen in different languages.

Qosmio F30-140 - How to use Flash USB boot option?

Dears,
After I update my laptop BIOS, when I start my laptop I find new boot method, it is from Flash USB ?:| How can I use it and what type of file must be in it? I mean .iso or what?
Thanks

Hi
I dont have Qosmio F30 so I cant test it for you but I think this options means that you can boot from an USB stick for example. Have you checked this?
You cant boot from an iso file because you must create a bootable media. For example a Windows start disc or a Linux version that you can boot from USB stick.

Qosmio F30 - question about D-Video out

Hey,
some months ago I bought a Toshiba Qosmio F30 notebook in Germany which has a D-Video output. There was also a cable included converting from D-Video to SCART. I tried that with some TVs at home using SCART but there was always a horrible fuzzy video signal where I could hardly identify some desktop icons. Do you have an idea what goes wrong there?
greetz
hmc

Hello
I do not know for sure but in BIOS settings somewhere must be option to enable SCART option. Please enter BIOS settings and check it out.
Other very important thing is to use the right channel on the TV.
Good luck!

Re: Qosmio F30-141: Is PA3237U-1ACA adapter compatible?

Similar Messages

Maybe you are looking for