Which proof setup profile is correct?

Hi,
I've found very conflicting answers to this question in the forums on this site:
When saving for web and devices, is it best to set your View-->Proof Setup to Macintosh RGB, Windows RGB, or Minotor RGB and color correct from there?
Thanks!

c.gray wrote:
Hi,
I've found very conflicting answers to this question in the forums on this site:
When saving for web and devices, is it best to set your View-->Proof Setup to Macintosh RGB, Windows RGB, or Minotor RGB and color correct from there?
Thanks!
All those settings do is let you view the image in that color setting. Most computers in the world are Windows so I leave it on Windows. Sometimes I check to see how it looks on Mac compared to windows I never worry about monitor profile because that is only pertains to my computer and nobody else.
As far as Minotor RGB thats a bit too bullish for me.

Similar Messages

  • Spyder4Pro in Photoshop CS5 - which proof setup?

    Hello
    I just ran Spyder4Pro calibration on my monitor for the first time. I am using a PC.
    Monitor Specs:
    Dell SP2309W
    2048*1152 Pixel Resolution 23 LCD Display
    VGA,DVI,HDMI connectivities
    on NVIDIA GeForce GTX 460
    Photoshop CS5 Extended
    I have my monitor Brightness set to 90 and Contrast set to 79.
    After I ran the calibration, I titled the profile June2012
    Now when I open an image in Photoshop, for the most correct coloring, do I set the Proof Setup to:
    -- Custom: sRGB Display Profile with display hardware configuration data derived from calibration
    OR
    -- Custom: June2012 (as of now, this is what images are opening up as automatically in Photoshop)
    OR
    -- Custom: sRGB IEC61966-2.1
    OR
    -- Custom: Document Profile - sRGB IEC61966-2.1
    (Or another option?)
    And then if I want to preview how it will be viewed online when I save my photo for web use, which profile can I preview it in?
    THANKS!!

    "Then the only time I will change it is when I want to preview it for a specific printer's profile I need to use. Correct?"
    Pretty much, and even then, it's you really need to see a few actual prints so you get an idea of how accurate the soft proofing is or isn't. It depends on both the profile and the media.
    "So as of now, this is what I'm keeping it at...
    Photoshop-->Edit-->Color Settings
    It is set to: sRGB IEC61966-2.1"
    A good place to start
    "When I open an individual file, I go to
    View --> ProofSetup
    It is set to Internet Standard RGB (sRGB)"
    Well, if your file is already IN sRGB, it's kinda redundant to use Proof Setup as you're already seeing your file as it's going to be - that being sRGB. You only need to use Proof Setup when you're going to print your file, and even then, you often don't really have to use it. Honestly, it sounds like someone told you you needed to use this all the time or the world would come to an end. Just have fun working in Photoshop and don't worry about it unless you come across a problems down the line.
    Is that OK now?

  • Which Proof Setup view to use?

    When I'm in Photoshop and I go to View>Proof setup... which one should I have checked to make certain I'm getting correct colors etc. for the image I"m working on?  I want that image look the same to me as it's going to look when I send it to the lab for prints or put it on a website or whatever.    I know if it's say a business card my proof setup is on CMYK but if it's portraits I'm working on, should it be Windows RGB or Monitor RGB or what?  Then, if I"m going to save a version for the web should I change that view and if so to what?   The whole thing could drive you crazy!    I"m running Windows Vista 32 bit home premium version and Photoshop CS4.

    lesrenee wrote:
    Oh, my mistake...  I'm not converting them, I'm using "assign profile".
    When I use the "convert" profile there's very little change in the look of
    the image.  What's the difference?
    But you mentioned in your previous posts that you have Photoshop set to ask "what do you want to do" when opening images with mismatched profiles. If that's the case, there is no "assign profile" options there. There you can only "convert", leave as is, and discard profile. You can assign profiles from the Edit menu though.
    Well, so far no one has an idea what exactly you do with your images and in order to understand what's going on, you have to go through the usual process of what you do and pay close attention to each step you are making, take notes, and try to describe it as accurately as possible. Do not tell what you do based on memory because you may not be aware of what exactly you have done.
    "Assign" keeps the original color values but changes the color appearance. For example, it keeps the same RGB numbers of the colors in the file but changes the RGB numbers your video card is using to display these colors, and you see a color shift. This is useful when you have an image without a color profile or wrong color profile and you know what profile describes the color space used for creating the image .
    "Convert" changes the color values but keeps the appearance. The RGB numbers coming from the video card don't change but the color values in the file change. This is the ultimate goal of color management - to make different devices display or produce the same color while changing the color values of the image to compensate for the differences of each device.
    lesrenee wrote:
    ... So what's the reason you use these different profiles for various companies
    if the image looks the same on my monitor??  Is what I'm seeing the same as
    what the printed images will look like?
    Read my explanation of "Convert" above as an answer to your question
    lesrenee wrote:... What about when I get an ICC profile like from Costco and I want to see what it will look like if I send it to them.  Do I convert it to the
    Costco ICC profile or assign it or what?
    MPIX sent me their profile too.  So should I convert it to their profile
    before sending it to them or leave it as a sRGB??
    You convert to that profile. Photoshop will convert the numbers describing the colors in the file in order to match the intended colors to the color reproduction capabilities of the destination device, and by using the profile of the destination device, Photoshop can display colors unchanged or as close as possible on your monitor by using the monitor profile installed in your Windows system.

  • Soft Proofing:  View Proof Setup Custom:  Profile Disappears when Re-opened

    Photoshop CS6 on Mac
    Edit an image file and get it to where I like on the monitor
    Duplicate the file and set the new file to the profile for the printer which will be used, by using View > Proof Setup > Custom and setting an imported printer profile for the printing company that I use.
    As soon as you do that, the file looks like crap, so...
    Edit the soft proof file to get it to where it looks good again. 
    Save off the file for the printer and also save the new PSD file.
    Close the PSD file.
    Reopen the new (soft proofed) PSD file.
    Still looks good, but.... when you check View > Proof Setup it's now generally set to Custom: U.S. Web Coated (SWOP) v2 instead of to the imported printer profile which was set previously.  WHY????  Where did the printer profile go?  Is it supposed to do this?
    If I then reset View > Proof Setup to the correct printer profile, the image goes to crap again. 
    Is this me doing something wrong, or is the PSD file not properly remembering the printer profile, or... what's going on here? 
    Thanks much!

    None of what you write makes any sense whatsoever to me, sorry.
    Let's start by using correct terminology.  For the last time, you are not "importing" any freaking profile.  Wrap your head around that once and for all, please.
    Let me try once again, totally disregarding the scenarios you were unsuccessfully attempting to describe above.  Forget all that mumbo jumbo for now, please.
    You have not mentioned what your working space is, so let's assume it's Adobe RGB.
    You have finished editing an image, so now you have an AdobeRGB-tagged image.  Fine.
    Now you want to soft proof it to see what it will look like in that FujiWonderPrinterInAlaskaUsingMatteThaiElephantPoopPaper printer in Anchorage.  (Made up names of course.)
    So you make a duplicate COPY of your finished image file named BabyPictForPrint.psd.  You're still in Adobe RGB, of course.  You put the original away in a safe and forget about it—forever.  That's like your negative in film days.
    Now you soft proof the BabyPictForPrint.psd COPY by using the infamous FujiWonderPrinterInAlaskaUsingMatteThaiElephantPoopPaper.icc profile the outfit in Alaska sent you.
    When you soft proof it with that Alaska profile, you have not imported anything.  Photoshop is simply using the profile you pointed it to to show you in your monitor what it would look like.  Your pixels so far are untouched, yet yo see your image "die" before your very eyes.  Ouch!  Now you need to compensate for the effect of printing under those proposed conditions, so you set about the task of editing the copy accordingly.  Remember, you're still in Adobe RGB.
    Once you have the copy just the way you like it, YOU SAVE ALL YOUR CHANGES in that copy.  Now you have a fully edited image file in the Adobe RGB space but tweaked to look fine when printed in the FujiWonderPrinterInAlaskaUsingMatteThaiElephantPoopPaper printer.
    At that point you are done!  Finished!
    Now you are faced with two choices:
    A) Sending the finished, saved ADOBE RGB COPY to your printer if you consider him capable of knowing what he's doing.  (If you think he does not know his business, look for another printer).  Or…
    B) Assume you're dealing with a moron on the other end who wants the image CONVERTED to his custom FujiWonderPrinterInAlaskaUsingMatteThaiElephantPoopPaper.icc.  If that is the case, then open your COPY in Photoshop, go to the Edit menu > CONVERT to Profile… and convert the copy to the infamous FujiWonderPrinterInAlaskaUsingMatteThaiElephantPoopPaper.icc profile.  It's critical to use CONVERT TO Profile, not "Assign Profile"!
    At that point, under scenario B), you do not EVER want to return to Proof View / Soft Proof mode, ever, EVER again, because then you would be applying the profile doubly and you'd see your image die before your eyes once again, and if you edited it you'd have real elephant poop!
    Hope that helps.

  • Custom cmyk profile not in proof setup

    Working with Blurb.com Printer Profile CMYK  named Blurb_IC_Profile.ICC
    Opened profile  and saved in Rose/AppData/Local/Adobe/Profile
    Cannot bring it up in soft proof setup.  Also when I close CS5 and reopen the profile is no longer in that location.
    I tried to see if the profile would work with changing the cmyk setting in the color settings under edit.
    CS5 menu comes up and states not a good working cmyk profile and does not load it.
    From what I have read on the Blurb forums people have downloaded this profile and it works.  No replies
    for 2011, last was 2010.
    I wanted to know if there is a special way to load this profile that I'm not aware of as I checked several photoshop sites
    to ensure this was the right spot to put the profile in.
    I am using Srgb setting for the images and  now want to soft proof them in cmyk before sending up to the Blurb they use
    4 color press Hp printers.
    Thanks
    Rose

    If you look closely at the image that states  blurb profile locked – there is a little golden image of a lock next to the blurb profile and it is locked – similar to what
    we see when we open a image for the first time and there is a lock (layer background) so you double click it and then background layer becomes “o” .
    I followed your image.png and your profile too.  I have watched their video 3 or 4 times.  I watched a color management
    color flow for an hour in Blurb. But the one hour video is using a Mac instead of Windows and the profile was already
    installed on the mac but they showed the process on the mac on where to place it – not windows.
    I am doing everything that is shown for windows and where you told me to input the blurb profile,
    However, when I close and reopen photoshop I do not see a blurb profile in proof setup.\
    The 1 hour color management video shows that the profile is named Blurb.icc but it is not in my
    setup for custom proof.   That video is done with a Mac and different placement  folders.
    I can only assume that Blurb.com profile needs to be changed or updated.
    I sent emails to them today again and hope to see some answers monday. 
    There showing a 32 bit profile video instead of 64 bit but you did help me to  get the profile in the right spot.  It is a very short
    video for the download process.  two screens to be exact.
    They don’t have a phone number or I would call them personally.  I have sent emails with pictures today.
    Thank you
    Rose

  • Adding Custom Profile under Proof Setup

    In prior versions of PS, if I added a custom profile under Proof Setup, it would be pinned to the Proof Setup menu (along with the default profiles).  That doesn't appear to happen in PS CS6. 
    Is there a specific place I need to save the custom Proof profiles to so that they will appear in the menu?

    I have had no issues with that and the location for me is
    ~/Library/Application Support/Adobe/Color/Proofing/
    Where exactly have you saved the file to?
    Could you provide a screenshot?

  • CS5 loop when doing Proof Setup

    I am primarily a Lightroom 3 user, but I do also use Photoshop.  I have been using PS CS3, but recently decided to try CS5 which I am currently using in a trial.
    I use Photoshop on every image in order to do soft proofing.  It has been working fine.  But today I started having what appears to be a loop in one thread of PS when I do "Proof Setup" on one particular image.  The CPU goes to almost 100%  (as displayed in Task Manager) and the UI becomes unresponsive.  By bringing up the desktop so that the desktop has focus, I can then right click on PS in the task bar and get it to close. Interestingly it prompts me with the standard prompt about whether or not I want to save the file - I reply "No" and PS then ends ok.
    It only does it on this one image - I've done quite a number in CS5 so far in my trial with no problems.  I've tried starting in LR with the image as a CR2 (Canon RAW), DNG and finally I built a TIFF.  Same problem in each.  It also happens if I open the TIFF directly in Photoshop without going through Lightroom.
    It works in CS3 on the same image without any problems.
    I have Windows XP and an nVidia GeForce 6200.  I recently updated my drivers to the latest version dated July 2010.
    Anybody else seen this?
    Thanks,
    Selby

    There's an outstanding issue I've reported with OpenGL and color management as well.  Adobe's not known for releasing more than a very few updates though...  We might have to wait for CS6, if indeed these are all issues with Photoshop itself, though they might not be; so many things can (and do) go wrong because of OpenGL inconsistencies from implementation to implementation...
    If your setting is Basic, try Normal, or vice versa.  You could also try disabling OpenGL entirely.  I'll be interested to know if these changes make a difference.
    Another possibility is a bad profile.  Color profiles are complex things and it happens that corrupted or poorly made ones cause problems.
    -Noel

  • Is it possible and how to create bright preview mode for a custom Proof Setup

    You know how there is Proof Setup preview modes under the View menu. Can I create a custom preview mode so that when I choose it and press Ctrl + y it shows the image very bright without changing it.
    I need this because I want to see and edit more details in the dark areas which I may not be seeing on my monitor or room lighting conditions and thus to create images with more rich and dynamic shading in the darks so when viewed on brighter monitors or when levels are eventually changed the darks reveal nice shading instead of flat black.
    I'm looking for per image solution that doesn't affect other images or applications like using global gamma.
    I'll greatly appreciate your help

    That's what I use Adjustment layers but they are a big pain because the color picker can't disregard them. So every time I want ot use the color picker I have to hide the adjustment layer and then when I paint I have to enable it again. I want a color picker that picks from all but not the adjustment layer. This makes this workflow impossible. I need this for painting artworks from scratch.
    There are no two equal monitors out there and some are quite off, so I want to create artworks that look as good as possible on all kinds of monitor including miscalabrated ones.These are samples to sell artwork. Not only that but the artwork often is edited from other designers not by brush repainting but using global adjustments like levels. And I don't want to use 32 bit workflows. What I'm asking will serve the purpose perfectly.
    I feel that since PS pulls the preview information from profiles that probably reside in files somewhere, I can modify a copy of a profile and I was hoping if someone here knows more details about this and helps.
    Thanks anyway

  • What are the right Color Settings and Proof Setup in Photoshop if you design for the web?

    This question has come up numerous times, but I still haven't seen a satisfying, final answer. I would like to make sure that what I'm designing in Photoshop in regards to colors, saturation and brightness will be as close as possible as what I'm going to see in my Safari browser once that same page has been developed.
    I understand there are going to be differences between monitors and browsers, but if I just could get an almost one to one translation in regards to color/saturation/brightness from my Photoshop file to that same developed HTML page in Safari that would be ideal.
    Currently I set my Color Settings to Monitor RGB - Display and my Proof Setup to Monitor RGB. Not sure if these settings are correct.
    Curious to hear your thoughts and advice.
    Thanks,
    -Tony

    if AdobeRGB is the more professional working space, then why not use that profile?
    on the web (and in unmanaged and broken work flows) sRGB is the safest profile (source space)
    just open your tagged Adobe RGB and tagged ProPhoto RGB document (use the embedded profile in each document)
    and go to View> Proof Setup: Monitor RGB (notice the loss in saturation? that's how most of the people on the Internet will be viewing your color, assuming you have a standard-gamut monitor like most people)
    always CONVERT to sRGB for the World Wide Web
    i didn't read your link
    anyone who recommends "disable color management in Photoshop" -- set Working RGB to "Monitor RGB" -- AND MOST UNBELIEVABLY -- "Don't color manage this document" (ignore embedded profiles) ------ is pretty mixed up (in my opinion)
    i will recommend reading JEFF SCHEWE and BRUCE FRASER for professional color management information

  • Photoshop Script - save as PDF, how to programmatically use "Use proof setup" option

    Hello,
    I'm trying to create a jsx script for Photoshop CC that will automaitically convert the given file to PDF format. The requirement is that the PDF must be saved using two options available on "Save as" dialog:
    - Use proof Setup: Working CMYK
    - ICC Profile: U. S. Web Coated (SWOP) v2
    (screenshot: http://screencast.com/t/hnnVejK5)
    I couldn't find any examples on the Internet. I experimented a bit and created the following script, it saves the pdf, but it does not seem to use the mentioned options.
    app.displayDialogs = DialogModes.NO
    var fileRef = File("C:\\test\\7000_tif_colors.tif")
    var docRef = app.open(fileRef)
    var fileName = "C:\\test\\7000_tif_colors.pdf"
    pdfFile = new File(fileName)
    pdfSaveOptions = new PDFSaveOptions()
    pdfSaveOptions.PDFCompatibility = PDFCompatibility.PDF14
    pdfSaveOptions.downSample = PDFResample.NONE
    pdfSaveOptions.colorConversion = true
    pdfSaveOptions.profileInclusionPolicy = true
    pdfSaveOptions.embedColorProfile = true
    pdfSaveOptions.destinationProfile = "U.S. Web Coated (SWOP) v2"
    pdfSaveOptions.preserveEditing = false
    pdfSaveOptions.layers = false
    pdfSaveOptions.outputConditionID = "Working CMYK"
    docRef.saveAs (pdfFile, pdfSaveOptions, true, Extension.LOWERCASE)
    docRef.close (SaveOptions.DONOTSAVECHANGES)
    Thank you in advance for any help.

    You may want to post over at
    http://forums.adobe.com/community/photoshop/photoshop_scripting?view=discussions
    Have you recorded the operation with ScriptingListener.plugin and tried using the resulting code?

  • CS6 Proof Setup Unresponsive

    I have been using CS6 for approximately 1 year, Went to use the program and found that I couldn't use Proof Setup. When selected the dialog box fails to appear and the Eye Dropper tool is automatically selected. Can't choose any other tool. Photoshop can't be closed without using Task Manager. Haven't had any issues with the program until now. Last time I used Proof Setup was to create a file for printing at Costco using one of their profiles. The computer being used is a Dell running Windows 8.0 with 16 Gigs of RAM.

    I have been using CS6 for approximately 1 year, Went to use the program and found that I couldn't use Proof Setup. When selected the dialog box fails to appear and the Eye Dropper tool is automatically selected. Can't choose any other tool. Photoshop can't be closed without using Task Manager. Haven't had any issues with the program until now. Last time I used Proof Setup was to create a file for printing at Costco using one of their profiles. The computer being used is a Dell running Windows 8.0 with 16 Gigs of RAM.

  • How do I activate the option "Use proof Setup"  when saving?

    I use special inks for print that are warmer than neutral but not sepia.  When i want to post the image online I would like to save the soft proof with image.  Any help on how to do this would be greatly appreciated.......

    Not used very often by me—if at all; but I found a ten-year old reference:
    From: http://www.clearps.com/photoshop-forum/index.php/t/16564/
    I hope that helps.
    >>what's the difference between checking 'Use proof setup' or not?<<
    Not sure I can do much better than the Photoshop Help file explains
    it...Specifically the "Selecting this option converts the document's colors
    to the proof profile space and is useful for creating an output file for
    print. "
    To change the embedding behavior of a profile in a document:
    1.. Choose File > Save As.
    2.. Do one of the following:
    a.. To toggle the embedding of the document's current color profile,
    select or deselect ICC Profile (Windows) or Embed Color Profile (Mac OS).
    This option is available only for the native Photoshop format (.psd) and
    PDF, JPEG, TIFF, EPS, DCS, and PICT formats.
    b.. To toggle the embedding of the document's current proof profile,
    select or deselect Use Proof Setup (available for PDF, EPS, DCS 1.0, and DCS
    2.0 formats only). Selecting this option converts the document's colors to
    the proof profile space and is useful for creating an output file for print.
    For information on setting up a proof profile, see Soft-proofing colors.
    3.. Name the document, choose other save options, and click Save.

  • Custom Proof setup script issue

    Hey all, I'm writing some code here that applies a specific icc profile via the View>Proof Setup>Custom  > Device to Simulate: dialogue.  Forgive me for the lengthy post, I'm just trying to figure out if I've hit a software bug here or maybe my code is just lacking.  At any rate, here's the rundown:
    The reason I am writing this is because I'm in a situation where I have hundreds (literally) of different .icc profiles to load at any given time, but if I load them all in at once, then if I try to view the list of .icc profiles, it takes a long time for PS to build that list.  So what I've devised is to use the name of the file in order to copy the necessary .icc over from where it lives to the local machine.  Currently this works like a charm.  The script opens the file, finds the .icc and copies it over to the right directory for PS to be able to read it.  No problems there.  The problem comes in with refreshing that list....
    This is where it gets tricky for me,  to help illustrate, I've added a pic here of the file menu item i'm referring to, and the resulting sub-menu in question
    So just to be clear, the problem is with the "CPC Menu" when I copy files over, they appear just fine, but the hitch is that they are invisible to PS until I call the CPC>Device to Simulate list manually.
    If I try to assign the .icc file using a script, it will work if the .icc has already been seen by literally showing the Device to Simulate list, but until that list has been manually updated, assigning the .icc profile will throw an error and not apply the .icc profle. 
    Hopefully this makes sense, I'm hoping that there's some sort of full app refresh command that will force the list to be rebuilt.  A couple things to note is that I've tried the app.Refresh() command, and that hasn't helped at all, it seems to only refresh the graphic components as opposed to lists.  Another thing I found to be interesting is that the CPC>Device to Simulate list is rebuilt when you create a new document, but I run into the same problem if I have the script make a new document after copying the .icc over but before trying to apply it.  Is this a known bug or is there any way I can get some help with this?  I can't really post the code, but I don't think the code is the problem here anyhow.  At best I could post some stripped down code but I'm hoping someone from Adobe might see this and know exactly what sort of wall I'm hitting.  Thanks in advance!

    You need a color profiling system (hardware/software) to create ICC profiles. Another alternative is to use a service like Chromix. There are several other service companies on the internet as well.

  • Can't get past  "Setup Profile" for registration

    I'm trying to register for My Verizon, but I can't get past the "Setup Profile" page in order to register. The "Continue" button on the bottom right will not allow me to click it. What's up? 

    Have you tried refreshing the page?  Using a different browser? Clearing cache and cookies on your browser?
    Is you browser up-to-date?  Running any add-ons like an ad blocker that might accidentally interfere?  Try it with a stock, updated version of Firefox or IE.  If that doesn't work, you might need to wait a few days, and if that doesn't help, call in and ask for some troubleshooting.

  • I forgot my id which i setup my ipad with

    hi i forgot my id which i setup my ipad with ,what can i do?
    <Re-Titled By Host>

    If you forgot your Apple ID you should start follow this article to help
    Apple ID: How to find your Apple ID

Maybe you are looking for