RE_ROLE_APPROVAL -wf type=access enfocer but not RE.

Hi all,
i have installed GRC 5.2 i have uploaded the configuration files. But when i go to CUP>configuration>request type for "RE_ROLE_APPROVAL" it shows the workflow type as "access enfocer" whereas in the guide it says that "make sure the workflow type RE exists". I am not able to change it to RE by clicking the change button. I have applied the sp14 support pack.
Thanks in advance.

Did you also upload the XML file for CUP (AE) from the VIRRE folder (_NOT_ the one from the VIRAE folder - look into that with Notepad, it says it's deprecated!)...?
Frank.

Similar Messages

I have a time capsule connected directly to fiber connection. I have connected a windows server directly to TC and configured it for remote desktop connection. From my interanet I can access srvr but not from my home. What config I need on TC?

I have a time capsule directly connected to fibre optic point out. All pcs and macs are connected wirelessly to the internet. I have connected a windows server pc to TC. When configured for Remote desktop connection, I can access windows server from within interanet but don't know how to access it from internet. I guess I need to change some settings in TC to get some ip adress for the remote desktop connection from my home. Anyone who can help me out? Appreciate it.
Narmin

I am a little lost now.. I have read again your title and your first post.. and they seem inconsistent.
In the title you state.
From my interanet I can access srvr but not from my home.
Interanet is not a word I know.. I assumed intranet...are you talking about internet or intranet? And just to be clear say WAN or LAN.. !! Is your home part of the interanet??
In the first post you state,
I can access windows server from within interanet but don't know how to access it from internet.
Now this is more normal.. the issue is not in the home at all, it is accessible from there but fails from internet. If this is correct, then you can do a few obvious things to determine where the problem is.
But first I need to know are you actually testing from a different internet connection to your home lan.. you are not just trying the public IP from inside the LAN as that will fail due to the TC not doing NAT Loopback.
I am also assuming the TC is the only router in the network, and has the public IP on the WAN interface.
And I am also assuming you have turned on the ping responder and you can actually ping your public ip from the internet and get a response. This helps no end in figuring out where there are issues. Strange but I have no idea if there is a ping responder in the TC WAN so you might need to forward that as well. Also if you have a dynamic public ip address are you using dyndns or no-ip or some other service to connect.
1. Test bypassing the TC.. plug the internet connection straight into the windows server,, and test if you have access. If yes, the TC is the problem.. if not, your setup on the windows server is wrong.. look at firewall in particular.
2. Assuming from test 1 the TC is the problem, Post the screen shots of the port forwarding setup for us to look at.. that is by far the easiest way to check it out.
There are lots of references to port forwarding in the TC.. eg
http://must-know-mac.blogspot.com/2008/07/how-to-port-forward-time-capsule.html
The things that generally go wrong are firewall on the computer that is accepting the port.
The ISP doesn't allow connections on a particular port. (not likely in your case)
The router is behind another router.. double NAT will kill any port forward.
Upnp has already allocated a port.. not an issue as TC doesn't use upnp although a reboot of everything after you set port forwards is well worth it.. amazing how things don't stick properly without a reboot.
IP on the receiving device is not static and so changes.
Not enough or right type of ports are opened. This is always messier than it looks as one port is often not enough for two way communications.

I can access Google, but not Gmail.

Hi guys. I've been having trouble with my internet connection for as long as I've had my Mac (one year). For the longest time, I've repeatedly had to click the icon for Airport and then turn it off and back on again to recover my connection to Google Gmail and Google docs. These are the first sites to disappear, later I have trouble accessing other sites, this is corrected by turing off and then on Airport. But that is very frustrating, and I often have to do it over and over again. Also, I'm puzzled by the fact that my Skype connection is rarely bothered when access to others sites drops.
I've been reading as much as I can find and trying the airport utility. Clearly I am stupid because things went from bad to worse. Now I can access Google, but not Gmail. I can access most parts of Apple.com, but when I tried to purchase the upgrade to OS 10.6, I couldn't view the page images. I found the same problem on a few other sites. When I tried to access Linkedin, I could get to the login page, but no further.
In each case, I get the usual message: Safari can’t open the page “https://www.google.com/accounts/ServiceLogin?service=mail&passive=true&rm=false& continue=http%3A%2F%2Fmail.google.com%2Fmail%2F%3Fhl%3Den%26tab%3Dwm%26ui%3Dhtml %26zy%3Dl&bsv=1eic6yu9oa4y3&scc=1&ltmpl=default&ltmplcache=2&hl=en” because Safari can’t establish a secure connection to the server “www.google.com”.
I've tried resetting Airport back to the factory settings. Now all I get is the blinking yellow light - I'm not sure what that means.
I'm now connected via hardwire, but access is limited to very few sites, such as this one and Google. I can search google, but I can't access gmail. I can access everything on my windows computer through the same wired network.
Message was edited by: WhidbeyTomas

I am having this same problem, but it's not related to parental controls. I have to keep turning the airport on and off as well. Here (http://www.mac-help.com/forums/showthread.php?t=9802) is a post I made over at mac-help.. still waiting for a reply.
What I've noticed is, the DNS is resolving correctly, but I cannot access certain sites. Regardless, I've tried Open DNS servers and still get the same result. It's not a specific browser. Certain sites go down in a few minutes after visiting them. Some go down faster than others. And others don't go down at all. Sites I've had problems with are Apple.com (to make this post I've had to turn the airport on and off continually), Gmail.com, Google.com, while Google.ca works fine.
A solution would be great..

After syncing a replacement iPad for the first time, my apps have a "waiting " on the screen I can access them but not on opening screen

After syncing a replacement iPad for the first time, my apps now have a"waiting" message . I can still access from settings but not on the opening app page

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/ts1630http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
To solve some sound problems, just follow these simple steps
1. Go to Settings
2. Tap on General
3. Tap on Reset
4. Tap on Reset All Settings
You may need to delete the game app and redownload (you won't be charged).
 Cheers, Tom

WRT 54G conected to access point but not internet

Hi There
The wireless router is working an can get to the internet on PC
My other PC see's the access point but
will not connect to the internet
Signal strengh andLink quality are good, looking at the
PCI Linksys adapter box
any thoughts?
Thanks

Whats the OS installed on your computer. In the system tray you will find the linksys monitor...right click on it and select "Use windiws XP configuration" ... once its done ... next to that you will find "Wireless Network Connection" icon ... Right click on it and select "View Available Wireless Network".... select your network... when prompted for "Network key" type in your security key and click on 'Connect' ... After this see if you are able to go online or not.

WRT160N Useable as a switch/access point but not as an internet gateway?

Greetings,
Can anyone tell me if it is possible to use a
WRT160N wireless N router as just a switch and wireless LAN access point and NOT as an internet Gateway? I have a LAN that is not connected to the internet that uses a Linksys switch and I need to get a wireless access point setup so that I can attach a computer wirelessly to this LAN. Occassionally I connect the swich to another router that does have internet access, but in general the LAN is not connected to the internet router.
Thanks!

You can use WRT160N as a switch...Connect the LAN to the Ethernet port of the router and change the ip address of the linksys router in the range of the LAN ip.

My iPod Touch 4G connects to access point, but not the internet.

I'm stuck for ideas, so any help is appreciated! I've gone through the troubleshooting guide, and none of that helped. I've reset my network settings, forgetting the specific network, resetting the router, resetting the iPod, restoring it to factory settings, upgrading to the latest firmware, and nothing has worked.
Sometimes, if I forget the network and reset my iPod, it may (but not always) work for that session. Whenever I try again, I have to repeat this process and HOPE it works.
I can't try on another network because that's not available to me and won't be for a while.
This happened really randomly. Nothing changed, and it's driving me mad. Any help is appreciated a lot!

Does it connect to the internet with other networks?
- If so that indicates a problem with your router. Likely time for a new router.
- If not that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

SQL query works in access 2000 but not through JDBC

Hello to all as my first posted message, I have a bit of a pickle on my hands. I have a query which is critical to for my application to function.
In Access 2000
SELECT sb.SeatName
FROM SeatBooking sb, Movie m, MovieSession ms, Booking b
WHERE m.MovieId = ms.MovieId
AND ms.MovieSessionId = b.MovieSessionId
AND b.BookingId = sb.BookingId
AND ms.DateOfSession = #2003/04/16 07:15:00 PM#;
This query works fine. When I insert it into my code
String query = "SELECT sb.SeatName \n" +
"FROM SeatBooking sb, Movie m, MovieSession ms, Booking b \n" +
"WHERE m.MovieId = ms.MovieId \n" +
"AND ms.MovieSessionId = b.MovieSessionId \n" +
"AND b.BookingId = sb.BookingId \n" +
"AND ms.DateOfSession = #" +
cp.getMovieSessionAt(i).getTrueTimeOfSession() + "#;";
The last line of code returns #2003/04/16 07:15:00 PM#; Which is the exact same as in Access.
To rule out some possibilities
- there are other less complicated queries which access the same database but work fine. so my code seems to be ok
- I have tried to use Format() on ms.DateOfSession to match the return value of the java statement (Which is a general date in Access in the format of 16/04/2003 7:15:00 PM)
Any suggestions would be appreciated!

Hi Simon,
On my Windows XP system with J2SE SDK version 1.4.1_02 and Micro$oft Access 2002, I have the following table:
column name    column type
id             Number
name           Text
updated        Date/TimeUsing the JDBC-ODBC bridge driver (that is part of the J2SE distribution), the following code uses the JDBC "escape" syntax -- and it works.
import java.sql.*;
public class JdbcOdbc {
public static void main(String[] args) {
    Connection dbConn = null;
    ResultSet rs = null;
    Statement stmt = null;
    String sql =
      "SELECT * FROM Table1 WHERE updated = {ts '2003-04-13 07:53:23'}";
    try {
      Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
      dbConn = DriverManager.getConnection("jdbc:odbc:db1");
      stmt = dbConn.createStatement();
      rs = stmt.executeQuery(sql);
      if (rs.next()) {
        System.out.println("id      = " + rs.getInt(1));
        System.out.println("name    = " + rs.getString(2));
        System.out.println("updated = " + rs.getTimestamp(3));
    catch (SQLException sqlEx) {
      System.err.println("Database operation failed.");
      sqlEx.printStackTrace();
    catch (ClassNotFoundException cnfEx) {
      System.err.println("JDBC driver class not found");
      cnfEx.printStackTrace();
    finally {
      if (rs != null) {
        try {
          rs.close();
        catch (SQLException sqlEx) {
          System.err.println("ERROR: Failed to close result set");
          sqlEx.printStackTrace();
      if (stmt != null) {
        try {
          stmt.close();
        catch (SQLException sqlEx) {
          System.err.println("ERROR: Failed to close statement");
          sqlEx.printStackTrace();
      if (dbConn != null) {
        try {
          dbConn.close();
        catch (SQLException sqlEx) {
          System.err.println("ERROR: Failed to close DB connection");
          sqlEx.printStackTrace();
}More details about the JDBC escape syntax are available here:
http://java.sun.com/j2se/1.4.1/docs/guide/jdbc/getstart/statement.html#999472
Hope this helps you.
Good Luck,
Avi.

Promote access relationships but not users

Hi everybody,
I am learning BOBJ security on the fly. Fun fun fun!!
I've set up the security the way the clients want it, and now we're trying to figure out how we're going to administer it ongoing. We would like to be able to make changes in development and then promote them into quality and production. I'd like to be able to change and promote the following:
- Access levels
- User groups
- Assignment of user groups and access levels to BOBJ components - applications, universes, folders, etc.
- WITHOUT transporting the users assigned to the user groups and / or components in development
It seems like LCM is the way to go even though we're having some issues with it. Is there a way to do what we want using LCM?
Thanks!
Krysta

The problem is, I can't find it. I am using the AirPort App on my ipad and I can't find any Guest configuration. Am I looking in the wrong place?
Apple assumes that you will be connecting the AirPort Express to a simple modem....not a modem/router or gateway type of device, or network server.
The Guest Network feature can only be enabled when the AirPort is set as the router controlling DHCP and NAT for the network.
If the AirPort is in Bridge Mode, the option to enable the Guest Network will not even appear in AirPort Utility.
On your iPad.....
Tap to open AirPort Utility
Tap the AirPort Express, then tap Edit
Is there a setting for Guest Network here?
If yes, tap to continue the set up
If no, tap the Advanced tab at the bottom
Tap DHCP and NAT
Tap Router Mode
If the setting for DHCP and NAT is set to Off (Bridge Mode), the Guest Network feature cannot be enabled in this setting.....which is the correct setting for the AirPort on your network. It's a Catch 22.
You might be able to configure the AirPort to operate in DHCP and NAT mode on the network, but there will be challenges to overcome....namely DHCP conflicts and Double NAT issues.

My computer will access websites but not search engines (Google, Youtube)

I'm getting a proxy server fault and I've been messing with the settings.
I can type in any website into the search bar, but I can not do a web browse.
For instance, I'm getting a "timed out" error for any browser and I can only access videos not hosted by Youtube.
So I do have an internet connection, just no ability to run searches.

Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
I am able to view the site on my computer. Reinstall and access again and check whether the problem is solved
Please report back to see if this helped you!
Thank you.

Trying to access WRT300N, but not successfull.

Hi everyone! I was advised to replace my router because it is showing signs of hardware failure. Normally this would be easy but I have an issue. The guy who setup everything for us forgot the information he used to setup the router. He also never gave us this information. This was all done before I started working with the company. I would have surely stored it in a google doc or something. I have tried a bunch of company passwords as well as the defaults. Can I send the router into cisco/linksys to get it unlocked? Or is there are way to get get the forwarding information from the router?
I need to get all of the port forwarding settings out of the router. These settings allow us to access our exchange server outlook web access. And we have 2 company portals setup as well that are internet accessible.
really, really, really appreciate any help!

The default password to login to the setup page of the Linksys router is admin. If its not working then you can try some of your common passwords or on your main computer you can check for the Linksys folder on the desktop. If the linksys folder is available on your computer you can open it and get the password for your router.

Airport Express: Internet Access Works But Not "Seen" in Admin. Util. ??

Hi All --
I have a friend with the set-up described below and a seemingly impossible problem. he's asked for my help, and so I'm asking for yours, because frankly the situation just has me stumped. Here goes:
Set-Up & Other Relevant Facts
• DSL connection comes out of the phone jack and goes to a Westell model 6100 modem.
• From there, a short Ethernet cable goes to a Linksys 5-Port Workgroup Switch.
• Two Ethernet cables exit the Linksys Switch: one goes to a PC, and one goes to an Airport Express (AX).
• From the AX, a USB cable goes to a printer (a Brother 1440 laser printer).
• The AX is only about 10 feet from his PowerBook G4 15-inch and he gets a full (four-bar) signal on Airport menulet at the top of the screen.
• When he first set-up his system, the G4 and the Airport did set up the Brother printer (using the Airport Setup Assistant), and the Brother is listed as a printer on the G4's printer window or such.
• Both the G4 and the PC access the web fine via this setup (the G4 wirelessly). In System Preferences > Network, the Airport Network is listed, and it says "Airport is connected to the network Apple Network 6c6c1. You are connected to the Internet via Airport."
Problems
• When the Airport Admin Utility is opened, no Airport Express appears at all, even when "rescan" is repeatedly clicked.
How can this be? How can the PowerBook be connecting wirelessly to the Web through the Airport Express, but the Airport Express no be "seen" by the Airport Admin utility?
• In addition, although web surfing is possible for both PowerBook and PC, neither computer is able to successfully print to the Brother 1440. When he tried printing from the PC, he got the following error messages:
[Status for LPT1]
Result=(02)The printer on this port is not responding.
Status Line=BUSY:H,ACK:H,PE:H,SLCT:H,FALT:H,SLIN:L,HBSY:H,INIT:H,STB:H
Later, it seemed that printing from either computer would start and then stall, flashing a variety of different signals about spooling or "printer busy" and the like, all of which appeared to indicate things just weren't working right..
Anyway, the initial questions we're dealing with are the ones in bold above. The printer issues are probably are related and they can be addressed secondarily.
Any and all help with this will be greatly appreciated. Thanks everyone.
-- JDee

Thanks for your reply- just to re focus my problem- I
have no issue with getting a wireless network "green
light"
Which is the cable modem correctly giving the Express an IP from your ISP's DHCP pool of numbers.
- my issue is I can't stream itunes or get a
usb printer to work off the xpress USB port.
I have checked everything as my posts explain- The
reason I have been looking at this thread is I have
never been able to see the airport in a "scan" per
JDee post.
That is odd and doesn't happen on my wireless network!
Nor have I read in any post that an extra
ip address is necessary
All routers have at least two IP's - an external and an internal. When the router acts as an internal DHCP server it hands out many more IP's. Your Express gets one external IP and the default internal one is set to 10.0.1.1 and the first IP handed out is 10.0.1.2, etc.
However I have seen different subnets- from dncp
server.
Are you talking about the external IP's that your ISP is randomly assigning without your control? Are you talking about the different ways you can configure the internal DHCP numbers? If not there's something else going on. Everything on Douglas internal network should have an IP from the Express DHCP server vs. JDee's internal IP's should all be assigned by the modem/router DHCP server. Once you have everything on the same network numbers AirTunes, printers, and Airport Admin Utility lists just work!
Hey look I really appreciate your help here in
anyway- I'm really stumped. I want to stream music
really bad... and just don't see why it won't work-
its drving me crazy...
I enjoy a good challenge, especially when they are solvable. After trying all the possible software and connection possibilities there's always the chance it's been a hardware failure all along
What IP number does your computer have and what number does the Express have? If it's a router it has two IP's!

Firefox can access HTTPS but not HTTP sites

Hi,
All of a sudden last Friday afternoon I could not load any sites external to our corporate network over HTTP in firefox; HTTPS still works fine. Also IE doesn't have any problems.
So far I've tried uninstalling and reinstalling, creating a new profile, disabling IPV6, disabling DNS prefetching and checking my firewall settings. I've also used wireshark to try and see what firefox is doing, but it seems that no traffic at all appears when an HTTP website is accessed, however accessing an HTTPS site does generate traffic.
We use Windows firewall with advanced security; I can't change much though because it is controlled by policy.
We also use McAfee for antivirus and Bluecoat for filtering; again I can't change anything here because they are either policy controlled or administered from elsewhere.
I think I can rule out Bluecoat as other PC's on our site can and still are using Firefox 4 to access the web.
Any help would be much appreciated.
Many thanks
Matthew Rose

Two different sites, one with .info and one with .net. One works perfectly without issue and they each have similar settings in Server, however one only seems to want to work using https prefix. The sites are both different and therefore needs to be accessed with http at this point. The problem is when I go to http://example.info it takes me to http://example.net which is not what needs to be occuring. This occurs internally and externally. Before the move I did my server was doing DNS as well and those settings have not changed or been modified except when I had to change their outside static IPs.

SP 2013 ECT - Created an External Content Type in SPD But Not Appearing in BCS

Hello Community,
I have created an External Content Type in SP Designer 2013, and the connection and operations all seem to work fine, but the ECT List throws an access error, and when I check the BCS Service Application the ECT doesn't even appear in the list. Has
anyone else ever seen this kind of problem and if so please brovide guidance and examples for resolving it.
Thanks!
Tom
Tom Molskow - Senior SharePoint Architect - Microsoft Community Contributor 2011 and 2012 Award -
Linked-In - SharePoint Gypsy

Hi Tom,
Have you created external content type from SharePoint designer 2013 successfully prevously?
And was it displayed in BCS service applicaiton previously?
Have you executed "External Content Type Operations" and saved it back successfully in SharPoint Designer like the following article?
Please check if it is related to the permission issue by using SharePoint Farm Administrator account to create this external content type.
If all above don't solve the issue, please check the ULS log for more information for troubleshooting when create the external content type.
http://www.c-sharpcorner.com/UploadFile/anavijai/create-external-content-type-using-sharepoint-designer-2013/
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Daniel Yang
TechNet Community Support

E1000 works behind E3500 as access point but not behind Airlink AR675W and ideas?

In my own home just testing my E1000 works fine as an access point with an E3500 as primary router using Linksys
method 1 (lan-lan connection) with E1000 IP reset to 192.168.1.2 and DHCP off and with
method 2 (lan-wan) with E1000 IP reset to 192.168.2.1 and DHCP On and different wireless SSID.
In my daughters building where I need it, I cannot get the E1000 to work as an access point. The primary router is an Airlink AR675W with ip 192.168.0.1 (255.255.255.0) delivering addresses 100 to 150.
When i try the E1000 in either method I get no internet connection on devices connected hardwired or wirelessly to the E1000. Before each setup I used the reset button and the factory defaults tab
method1 (lan-lan) I set the E1000 to IP 192.168.0.2 to be different than the Airlink and DHCP off.
method2 (lan-wan) with E1000 IP reset to 192.168.2.1 and DHCP On and different wireless SSID.
Are there any ideas why I cannot connect to the internet in this way behind the Airlink primary router

ok - i will read up on the airlink - it is a landlord situation but he will probably let me do a few things to it.
Also I see the Airlink admin IP default is 192.168.2.1 and not 192.168.0.1 like I thought so that might make a difference.
I don't know what flash DD-WRT means. Its a 10 minute drive to the other house. The internet provider is SHAW cable and I do not know the modem but it is probably Motorola SB5100 or SB5102 wired modem. The problem is it is a large house with concrete walls & floors & double pane windows so the wireless signal downstairs is weak. ethernet cables are probably ok but I'll take some more with me. The ethernet jack downstairs definately works as I can connect a single PC to it.

RE_ROLE_APPROVAL -wf type=access enfocer but not RE.

Similar Messages

Maybe you are looking for