RE : Sales based rent agreement- additional reporting rules

Dear Friends
I have created a contract with relevant to Sales tab flaged.
The starting date of the contract is the middle of the month and the agreement with the Business partner is to make sales based settlement on an monthly basis i.e in days as the contract start date is in the middle of the month and on monthly for rest of the period. In fast entry for new sales rules, we specified the frequency start date and frequency in months and also gave settlement frequency in the same way and then attach condition types to the sales rules.
Since the frequency is reporting rules is given in months, and the system caculates the report for 30 days extending to the next month also.
For your easy understanding I have explained the issue with an example:
Contract Start Date 23.03.2008
Contract end date 22.03.2010
Reporting rule frequency 1 month and start date 23.03.2008
Settlment frequency 1 month and start date 23.03.2008
The settings in Frequency start to "Start of Calender year" in Posting parameter has no effect on reporting rules.
Now I need to run the sales based report as per the following
From 23.03.2008 to 31.3.2008 i. e for 9 Days and after that
every month i. e from 01.04.2008 to 30.4.2008,01.05.2008 to 31.05.2008 and so on
I request you to kindly help me as to how I can overcome this issue
Thanks & Regards
Panda

The issue was relating to both
1) the grading which must have a highest level defined as from X to $0.
2) The condition for the sales rule must have a valid from date. If not, the error displayed is "No sales rule specified" but its actually the related condition that is failing.

Similar Messages

Minimum Gurantee and Sales based rent conditions

Hi RE-FX experts,
We have a scenario wherein from a given physical rental object, we sell two
different categories of Products. We have seperate Minimum Guranteed
Rent conditions for the two and different Sales Based rent %age share.
In RE-FX Contract, we can not assign same condition type (Minimum
Guranteed rent/Sales Based rent) twice to the same rental object for
the same period.
Kindly suggest if this can be handled through RE-FX.
Pankaj Wadhwa

Hi Experts,
I have a business case wherein One Rental Object has been leased out to a Customer and the Customer is selling two categories of products from the Rental Object. This is a Sales relevant contract.
The Customer is paying different Minimum Guranteed rent for the two Product categories (e.g. Product category A: Minimum Guranteed Rent: 10000 and Product category B: Minimum guranteed rent: 25000).
The Customer has different revenue share for both the Product categories viz Revenue share % for Product category A: 20% and Revenue share %age for Product Category B: 30%.
How can we make a RE Contract like this in the system..
I am trying to create such a contract wherein i have created two reporting rules for the two Product categories and Sales rules as well with the relevant revenue share %age. I am trying to enter Minimum Guranteed rent Condition in the Contract for both the Product Categories seperately since the values are different(10000 & 25000) and the revenue share %age are also different.
But since the conditions are assigned to the Rental Object and as per the design of SAP RE-FX, we can not assign the same condition(Minimum Guranteed Rent here) to same Rental Object for the same period, i am getting stuck.
Can anyone help me on this problem.
Thanx in advance,
Pankaj Wadhwa

Sale Based Rent- You are not allowed to change sales-based rents

Hi everybody,
While processing a sale based rent using T-code : RESRSE, I got the problem as below:
At the Log Display Screen:
Step Processing of Sales-Based Rents performed on 19.12.2011 at 17:00:02
Status of step: You are not allowed to change sales-based rents.
Runtime for step: 00:00:00.
Does anyone experience this issue? Please give me a hint to solve it?
Thank you very much.
Regards,
TienLQ.

Hi Franz,
"I guess that the parameter 'Change Direct.' in the details is set that a change is allowed." You're totally right.
I missed it. After I did the changes for this, the process for Sale Based Rent is good but I couldn't posting the result.
I saw that EhP4 has introduced a new feature whereby we can post sales based settlemnet using periodic posting feature. For this, a checkbox is introduced in the system which we have to check in the contract and is named as 'Post using periodic posting'. I dont see this indicator in my system even though I am on Ehp5.
Could you please advise?
Regards,
TienLQ

P.O.S system integrating with Sales Based rent

Hello Gurus
Is it possible to integrate sales based rent with a P.O.S ( Point of Sale) system from the client side, ie customer, if so how?
I very much await your response.
Much Regards
David

Hi,
Yes, the solution depends on communication protocol which you want to use.
Option1: SAP receives the data through IDOC from EPOS and pass these values to BAPI BAPI_RE_SALES_REP_REPORT
Option2: In case if you are using any middle-ware, middle-ware receives the data from EPOS and tell your middle-ware consultant to consume BAPI BAPI_RE_SALES_REP_REPORT in middle-ware. You can use .Net connector / Java connector in middle-ware to consume SAP BAPI's directly.
rgds,
Srini

[Sale Based Rent] RESRSE- Settlement step Processing of SBR not successful

Hi everyone,
While processing Sale Based Rent Contract by RESRSE,
I got some errors as below ( I'm using Cod Type: Sale Based Rent of System)
Step Posting of Sale Base Rent in Financial Accouting perform on 21.12.2011 at 11:14:4
Message for Receiving Posting
LO REC 4000/HAS 01/50, period 01.02.2011- 28.02.2011, settlement step Processing Sal
LO REC 4000/HAS 01/50, period 01.03.2011- 31.03.2011, settlement step Processing Sal
Message for General Cashflow Records
LO REC 4000/HAS 01/50, period 01.02.2011- 28.02.2011, settlement step Processing Sal
LO REC 4000/HAS 01/50, period 01.03.2011- 31.03.2011, settlement step Processing Sal
Message for Object Transfer
LO REC 4000/HAS 01/50, period 01.02.2011- 28.02.2011, settlement step Processing Sal
LO REC 4000/HAS 01/50, period 01.03.2011- 31.03.2011, settlement step Processing Sal
Message for Transfer of Advance Payment
LO REC 4000/HAS 01/50, period 01.02.2011- 28.02.2011, settlement step Processing Sal
LO REC 4000/HAS 01/50, period 01.03.2011- 31.03.2011, settlement step Processing Sal
I thought I was missing somethings. Please advise!
Regards,
TienLQ

Hi Li,
It is very difficult to find out what went wrong basing on message number, that to message class RECAPR is common message class and it will be used everywhere in RE process (settlement, periodic postings ......)
if you provide some more details, somebody can help you.
I think all your error message relates to same issue, provide error log details for any single step.
rgds,
Srini

Wrongly posted Sales Based Rent

Hello,
I have posted a SBR with Sales volume Zero. Now, we realised that there is a sales value for that period. Can you please advise how to correct it.
Should i input the new volume in RESRRP and run RESRSE again or should i reverse the old SBR and input the new sales volume and post it again.
Kindly advise.
Regards
Saravanan.A

Hi Saravanan
What you guessed is right. You need to update the sales (whether with RESRRP or manually within contract) which will result in new versions. But then, instead of RESRSE run RESRSECORRECT (Correction of Sales-Based Settlement) if reversing cannot be made.
Regards, Sekhar

Sales Based Contract : Error : Selec a valid settlement

Hi,
Iam new to the RE Module.
Whil doing the TCODE : RESRSE, iam getting the message as 'Select a valid settlement'.
Contract details are as follows:
Condition type is selected only one that is the Sales based and it is statistical.
Sales quantities has been updated.
Sales amount given in the "Sales Rule" - Calculation.
I've given the validity dates, posting date, settlement date correctly.
My question is : Here, is actual condition type (like any rent) are necessary to get calculate and settle the sales ?
If the actual condition type is not necessary then what would be necessary things to be updated ?
Please reply with your inputs.
VVR

Hello
Pls check the below:
1. Before RESRSE, the respective sales figures should be available in the Contract or if no sales available Tick Zero Sales upto the period for which the sales settlement you would like to do.
2. In RESRSE, in addition to default fields like Co Code, Contract No, etc select Settlement Method Simulate, Settlement Type as Standard, Settlement schema as Using Actual AP, Settlement step as 05 Simulation of Posting Costs.
3. In Selection of Sales Rule tab, give Settle Upto Date.
4. In Parameters tab, give Text, Posting & Doc Date, Posting Period, Baseline Date as per the requirement.
Now execute and see. If successful remove simulate and select execute in Settlement Type.
Regards
Amarnath.R

Sales based data migration through LSMW BAPI (BUS1505) change

Hi Everyone,
keep getting this error message while trying to load sales based scenario.
there is neither no term category in the sales rules's structure nor it is in reporting rule's structure.
error message
Term category 1410 cannot be used in sales rules
Thanks in advance.
Regards,
John

John,
That is hilarious I know that feeling.
Not sure why you are getting this error but try following -
1. Make sure your file does not have data in cells which you don't use.
2. Structures which you do not want to pass any values in, do not pass those structures at all. Means if you wish to change only business partner then user only 1 structure and one header record for identifying the contract that is it. Do not pass any other structure not even blank in the file.
3. Make sure in source to target mapping you have made correct assignment if by mistake you have made incorrect assignment you will get bad data.
4. When you read your data execute step display read data and review where you see 1410.
5. Similarly when you execute Convert step in LSMW execute display converted data and you will see if 1410 was populated.
last step if none of the above works ) Display the conversion program and put a debug point at this particulat field and see from where this value is being passed. This is no standard error so it has to be your LSMW/Input file.
Let me know what it was
Jag

Excel o/p in Reports 9i-additional report header for every row

Dear All,
Is there any way to generate an Excel file output from OracleReports9i.Actually I have tried the simple report.
I am able to create a delimited output.But the prob is it contains an additional report header for every row of the report and this is very strange.Its coming like that
Empno     Ename     Job     7566     JONES      MANAGER
Empno     Ename     Job     7902     FORD      ANALYST
I need the Xls o/p like that
Empno     Ename          Job
7566     JONES      MANAGER
7902     FORD      ANALYST
8877 JAMES SALES
my Environment oracle9i developersuite /forms9i/reports9i
I have given     DESFORMAT = DELIMITED
          MODE      = CHARACTER
I am able to generate the reports in html/HTMLCSSIE/HTMLCSS/PDF/RTF
Only delimited is giving problem
What should i do to resolve this issue. Please help me it is very very urgent for me.
Thanks in advance
Pavendhan.N

I had the same problem and this is what I did, works great. You have the total control.
function BeforeReport return boolean is
fp text_io.file_type;
begin
-- creating a file name
:CP_filename := 'C:\Gap'||to_char(sysdate,'MMDDYYHHMISS')||'.csv';
-- Opening the file in write mode
fp := text_io.fopen(:CP_filename,'w');
-- writing the column headings into the file
text_io.put_line(fp,'"Platform","Sys#","GapType",');
text_io.fclose(fp);
return (TRUE);
end;
and then where ever it is suitable, depending on the requirement, write into file by opening it in the append mode.
function R_G_systemplatformFormatTrigge return boolean is
fp text_io.file_type;
begin
--     srw.message(99,:dname);
fp := text_io.fopen(:CP_filename,'a');
text_io.put(fp,'"' || :systemplatform || '",');
text_io.put(fp,'"' || to_char(:sysno) || '",');
text_io.put_line(fp,'"' || :CF_gaptype || '",');
text_io.fclose(fp);
return (TRUE);
end;
This works great. Hope this helps.

Fixed Asset Additions Report

Hello,
Is there a way to run a fixed asset addition report in SAP and then export it into excel? I have run S_ALR_87012058, however, there is no way to export this into excel. Can anyone help please?
Thank you,
Lesley-Anne

Hi,
you can export the result of report S_ALR_87012058 and save it into excel file.
please follow the path below.
Regards,
otep

Link from the Sales order/Sheduling Agreement to planned order

Hi,
SAP SD Gurus,
Can you please tell me the the link from sales order/sheduling agreement to planned order.
Thanks,
Anand

. I would like to know why only for this character the values is not displayed.
Dear,
Please check the relevant characteristic in CT04
select the addnl data tab
You can find the table name and field name
and also you can find the check mark in not ready for Input in procedure of value assignment

Custom Tax Additions Report

Hi All,
A Custom Tax Additions Report is coming up with no data found for a specific book type and a period run.
Does any one know, what could be the reason? Has anyone faced something like this before?
Module is 'FA' and its base report I believe is FAS480.rdf
Thanks,
Chiru
Message was edited by:
Megastar_Chiru

check the following blog and the how to document
Fixes Available for Portal Activity Report
http://wiki.sdn.sap.com/wiki/display/EP/HowtoConfigurePortalActivity+Report

Omit sales related info in Materials report

Hi Experts,
I have a Material Master report, which gets fields only from non-sales related tables. But I still see two rows for each material, one ofr each Sales Org.
Previously the report had data like Sales Org, Dist Channel nad Repair Cat which were pulled from MVKE table. Now I have removed all these and also Company Code field was removed that comes from T001 table.
So my question is why does the report still show two rows for each material eventhoug there are no Sales related fileds being pulled into the report.
thanks,
ACS
I still have the Company Code in the selection criteria, can this be the reason?

Gattu,
Thanks for your reply.
However, the problem goes like this.
I am working on an existing BO report. This report works perfectly(shows only the open sales orders) except for some leakage(some delivered items too get it).
The existing report's query have filters only one MRP Element and Order Category.
Could there be anything that can be done with these objects?
Thanks,
Arun KK

Sales based on customer group

sales based on customer group is reqd , ? is there any TCode to find or any other way

Hi,
Goto SE16,
Table VBKD
Field KDGRP
I could't find any t.code for this.
Regards,
Chandra

'Hierarchy Based Login' and 'Direct Reports' field in Dim - Position table

Hello -
I am trying to build a "My Team's" report, which basically shows the logged in Managers ( and his subordinates) revenues rolled up by default. Then the manager needs to drilldown on his name and see revenues grouped by his direct reports. I am using OBIEE 10G. In the out of the box RPD, there are two fields in the BMM layer called 'Hierarchy Based Login' and 'Direct Reports'.
1. The 'Hierarchy based Login' field uses the INDEXCOL method to get relevant column from the W_POSITION_DH table based on the the Logged in users hierarchy level (the hierarchy level is stored in a session variable (HIER_LEVEL). This session variable works fine and i have tested the SQL)
2. The 'Direct Reports' is using the same INDEXCOL method, just that it uses the formula HIER_LEVEL - 1. This works fine as well.
The issue i am facing is neither of these out-of-the-box fields are assigned to the Position dimension (the position dimension also exists OOTB).
So basically, i am able to create a manager and his direct subordinate report, but without any drill functionality.
I am trying to get the report to drill all the way down to the bottom most level of the heirarchy.
Any help to get this working is much appreciated

What i meant was neither of these out-of-the box fields are assigned to a Dimension Hierarchy ( there is a hierarchy called 'Position' that already exists out-of-the box). Other fields in the 'Dim-Position' table are assigned to a level in this position hierarchy, except these two. I guess what i am trying to achieve is to dynamically assign the hierarchy level based on the users Hierachy level in W_POSITION_DH table.
Thanks for spending time to look into my issue

RE : Sales based rent agreement- additional reporting rules

Similar Messages

Maybe you are looking for