Re: Separate shipping charge for multiple ship to party

Hi guys,
We are using the total order value to calculate shipping charge that should be applied to the customer.
0 - 25 -- $6
26 - 50 --$10
and so on
So i am using a condition type ZSHH which groups all the conditions types on value basis and applies the right charge in the sales order.
However when there are 2 ship to party in the sales order, then also it is adding the value of all the lin-items in the sales order and applying the shipping cost.
What is desired that the condition type should calculate the total of the items to be shipped to every ship-to-party and apply different shipping charge for every Ship-to-party separately.
I am not able to figure out how to do this?
Do I need to write a different Structure Group Key Formula so as to acheive this functionality.
Currently The condition type is assigned to the structure key - 1 (Overall Document)
If yes ... kindly guide me .. what all things should I pass to the abaper so as to help him develop the structure key.
Thanks in advace
Vinit

Does my question make sense ... as no one is replying ... I feel that I am asking some ridiculous or may be an obvious question.
Can anybody guide me ?
Thanks
Vinit

Similar Messages

Can I set a minimum shipping charge for each catalog?

I'd like to set minimum shipping charges for each of my catalogs. Then have USPS or UPS kick in if it is more than the minimum shipping charge. Is this possible at all?
Josh

Hi Josh,
We don't have a feature for this exact requirement. We do have min/max quantity within products however as an alternative perhaps.
I'm not sure if you can maybe use some JS to accomplish what you are after. I'll leave this thread open to suggestions.
Kind regards,
-Sidney

Got charged for free shipping

I took advantage of the Elite/Elite Plus early Black Friday sale and purchased quite a few items. However, after reviewing my order, I noticed a $5 charge for shipping. Next to each item it says "Shipping: $0.00" but somehow that $5 got there on the end. I checked each item as well, and each qualifies for free shipping if the order is over $35 (I bought a tv among other things, so it definitely is! )
I can provide the order number if necessary to any mods here. I don't really mind how I receive the credit--gift card, My Best Buy Points, etc. The only thing I am concerned about is possibly messing up my order if anything is done to it. I have 7 gift cards, 1 large MyBB certificate, and Gamer's Club Unlocked all properly attached.
Thank you for any assistance. Just message me if you need my order number.
Solved!
Go to Solution.

Hello NeoQuintessence,
I'm sorry to hear that there was an additional seemingly unexplained charge on your recent BestBuy.com purchase.
In reviewing your order, I note that the charge you were assessed is a California Electronic Waste Recycling Fee that must be added -- in accordance with California state law -- to the purchase of video display products such as computer monitors and TVs sold in California. Unfortunately, we cannot offer a refund for this fee.
I hope this helps. Thank you for writing to us with your concern!
Sincerely,
John|Social Media Specialist | Best Buy® Corporate
Private Message

Fetching freight charges for separately shipped sales order lines

Hi,
I am facing a problem for fetching the freight charges with respect to an invoice , from the Table : OE_PRICE_ADJUSTMENTS for the case of a sales order which has two lines and the first line is shipped once and the second line is shipped later.
In my case two invoices are created for the same sales order as the two lines are shipped seperately and not at once.
Now while fetching the freight charges from the table oe_price_adjustments, we pass only the header id and charge type for fetching the freight charges (invoiced_amount field in oe_price_adjustments). As the header id is same for both the invoices , i am getting a repetition of freight charges for both the invoices .
Thanks,
Govind

Hi,
I am facing a problem for fetching the freight charges with respect to an invoice , from the Table : OE_PRICE_ADJUSTMENTS for the case of a sales order which has two lines and the first line is shipped once and the second line is shipped later.
In my case two invoices are created for the same sales order as the two lines are shipped seperately and not at once.
Now while fetching the freight charges from the table oe_price_adjustments, we pass only the header id and charge type for fetching the freight charges (invoiced_amount field in oe_price_adjustments). As the header id is same for both the invoices , i am getting a repetition of freight charges for both the invoices .
Thanks,
Govind

One Shipping Point for Multiple Storage Location

Hi
How to ship a sales order from Multiple storage location.The system is not accepting .Can any one tell us the missing portion ?
Thanks

We want to assign Shipping Point to Multiple Storage Location.It is all batch Managed ..The Material will available in two or three location.We don't want the stock to move to shipping location.We want to confirm at the time of creating sales order with the available location to one shipping point

Shipping condition for MSDS shipping

Hi guys,
May I know why a shipping condition (VV21) need to setup for MSDS shipping?
May I know the reason being this?
thanks
Karen

Hello,
This is condition table, which tells the system about what is the Partner function and what is the company code / Sales Organization to which it needs to send MSDS. .
If you need to know more information check SD documentation
Thanks
Jayakumar

Single role for multiple sold-to party

Hi Gurus,
I have report which will be used by multiple sold-to party(Users). How can I implement authorization for multiple users for the single report.
Your points are assured.
Thanks and Regards
Mahadev Prasad K.M

This document will guide you:
Advanced Features of SAP BW Reporting Authorizations
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1b439590-0201-0010-ea8e-cba686f21f06
Hope it helps.
Regards

Shipping Charge for free goods Error FF805 Tax statement item missing o0

Hi,
We handle a lot of free goods and Subsequent deliveries which are free of charge.
The item category has been set "relevant for billing" and "100% discount (B)" for relevant for pricing.
We have absolutely no trouble in billing and creating the accounting document for the free goods.
However, sometimes the client would like to charge shipping/handling/freight cost to customers on this. In this case (the net value is 0 and freight will have some amount), billing document is generated as expected but accounting document doesn't.
We get the error "Tax statement item missing for tax code O0" FF805"
We think this happens because the net value being $0.00.
In pricing procedure all the shipping and tax condition types have requirement '2' (and I tried with blanks also)
How to correct this issue? The client wants to bill the customer for freight even if net value is $0.00.
Helpful answers will be rewarded.
Thank You,
Manoj

Hi Manoj
Firstly , Check wheather the tax code O0 is assigned to MWST condition type in VK12 .
Secondly check wheather that tax code you assigned is an input / output tax .
Finally check what tax procedure has been assigned . and check wheather that tax code is available in that tax procedure or not
Regards
Srinath

HT5525 I am ordering 27 seperate books for my class. I am a teacher. I dont want to have to pay the shipping cost for every book. Is there any way I can pay one shipping cost and you can send me all th books at the same time? Thank you. Linda Gleichm

I am a teacher and I am sending 27 books to be published. I don't want to have to pay postage on each book. Can you send them to me all at once and just charge me one postage fee. I can't aford to pay for postage for each child in my classroom. Thank you.
Linda Gleichmann

1 - we are users just like you - so not we can not do anything about bulk shipping
2 - Apple printing policy is that only multiple copies of the same (identical) book can be ordered in one order with one shipping charge - if you are ordering 27 copies of the same book then there will be one shipping charge for the order - if there are different bookd then there will be a shipping charge for each different order
see http://store.apple.com/us/help/print_products for more information
LN

Shipping Charges & Sold To Address

Hi,
I'm working on Commercial Invoice reporting. Release R12. I need to populate the shipping charges for the order and the Sold to Address. I have the Sold_to_Org_id from the Oe_Order_headers_All table. But Not sure how to link to the tables to get the address information.
Can any one tell me from where can I fetch these values?
Thanks
GM

Thank you for your reply. I have written the query already.
For Sold to
SELECT party.party_name,
hl.address1,hl.address2,
hl.address3,hl.address4,
hl.city|| decode( hl.city,null,null, decode(hl.state,null,null,', '||hl.state))
||decode(hl.province,null,null,', '|| hl.province)
||' '||hl.postal_code S_city_st_zip,
terr_to.territory_short_name
FROM hz_parties party ,
hz_cust_accounts cust_acct,
HZ_CUST_ACCT_SITES_ALL HZS,
hz_cust_site_uses_all hcsu,
hz_party_Sites hps,
hz_locations hl,
fnd_territories_TL terr_to
WHERE 1=1
AND cust_acct.party_id = party.party_id
AND cust_acct.cust_account_id = '1005'
AND HZS.Cust_Account_ID = cust_acct.CUST_ACCOUNT_ID
AND hcsu.cust_acct_Site_id = hzs.cust_Acct_site_id
AND hcsu.site_use_code = 'SOLD_TO'
AND hps.party_site_id = hzs.party_site_id
AND hl.location_id = hps.location_id
and hps.party_id = party.party_id
and hl.country = terr_to.territory_code
Shipping Charges
I'm taking from wsh_frieght_Costs
Thanks
GM

Shipping Charge Error

Hi,
Every now and again there seems to be a problem with our shipping charges, which results in the charge being set to zero and the customer gets away without paying for delivery. For example, we just had a customer purchase an item last week and for some reason the charge for express shipping was zero. She place an order for the same item again today and was charged the correct amount.
We are using the integrated Australia Post standard and express shipping options on www.bluebanyan.com.au.
Please help, as this is not the firts time it has happend!
Many thanks
Paul

Go to the shopping cart, if you got developer toolbar in firefox for example turn off javascript. YOu can then get to the payment form and turn script back on and find you got no shipping cost added.
This likely what is happening.
You can add an extra shipping paramater to the shipping tag (See tags quick reference in the knowledgebase) and you can try those options to get it working better.

Header line missing for multiple records in the Receiver Email.

I have a file to email scenario
I see the content in mapping has proper output with all the HDRs and ITMS. but when it comes throught the receiver it is missing the HDRs.
Source
HDR1***   ITM1*** ITM2****
HDR2***   ITM1*** ITM2***ITM3**
The email Body looks like the following:
HDR1***   ITM1*** ITM2***ITM1** ITM2***ITM3*
I am missing the HDR for the subsequent recodrs and the subsequent items are shown as if they are the items of the first HDR1. I checked the Mapping the mapping output and it looks good, but when i actually get the email i see it missing susequent HDRs.

When I was at a client on 11.5.10, I ended up creating a personalization on the Requisitions screen.
If someone created a requisition with 2 ship to orgs, it raised an error.
It was not full proof but it was deemed satisfactory by the client.
You can consider personalization or you can modify the requisition approval workflow to include the check for multiple ship-to condition.
Hope this helps
Sandeep Gandhi
Independent Techno-functional Consultant

Apple shipped my bumper but charged for iPhone

I ordered an iPhone 4 on the 29th then two days later I ordered a white bumper. My phone is supposed to ship the 21st and bumper the 23rd. Yesterday I was charged for the phone so I checked order status and my bumper was shipped but my phone isn't even prepared for shipment.
Has anyone else had anything like this happen?

Sounds to me like you ordered 2 items that were not in stock and the bumper came in stock first so it is being shipped first. Your orders have nothing to do with each other, just be happy your bumper is shipping.

How to account for Shipping charge not used during Purchase Process?

A PO was created. PO had purchase item price, tax, freight with shipping and insurance.
Goods received.
PO invoiced for item pricetaxshipping.
However, insurance was not paid for in Freight.
Question is how can we return the amount back to Vendor?
The Goods Received Document is open as shipping amount is still remains to be accounted for. What is a good for to account for this shipping charge if not returned to Customer.
Thanks.

Hi Gordon,
I think it was my mistake.
This is what is the conclusion like you suggested.
Whenever Invoice is less than po, it automatically adjusts the Inventory of Finished Goods Account on credit side with the amount we paid less.
Thanks. So no issues here.

How do I charge sales tax on shipping ONLY for Minnesota addresses?

My items are properly set up so that customers with Minnesota bill-to and/or ship-to addresses are charged MN state sales tax on the items the purchase. But according to Minnesota law, they should ALSO be charged MN sales tax on the shipping costs. How do I adjust my shipping profiles so that shipping is taxed ONLY for Minnesota bill-to and/or ship-to addresses?

can anyone help with this? thank you.
My items are properly set up so that customers with Minnesota bill-to and/or ship-to addresses are charged MN state sales tax on the items they purchase. But according to Minnesota law, they should ALSO be charged MN sales tax on the shipping costs. How do I adjust my shipping profiles so that shipping is taxed ONLY for Minnesota bill-to and/or ship-to addresses?

Re: Separate shipping charge for multiple ship to party

Similar Messages

Maybe you are looking for