Read result list in SequenceFilePostResultListEntry

greetings to the citiizens of Teststan-osphere,
I have to  read the resultlist from main seq & sub seqs  (num, str, arrays bool etc)  in   SequenceFilePostResultListEntry   
I was partly sucess ful using
 Parameters.Result.AdditionalResults["Parameters"]
1) are there  other  methods   for the same task. 
2) the steps in  SequenceFilePostResultListEntry    do not record their  result.   How do I record a result in this callback.?

We could probably help you better if we understood what your goal was.  Why do you want the callback to insert results into the container?
You can access the caller's resultlist by using Caller.Locals.ResultList.  Then you can iterate through it and do whatever you want pretty much.
  You can even insert subproperties into it. 
I don't recommend recording any results in an engine callback.  That just doesn't make sense.  It doesn't get propagated back to the main resultlist.
If you want to manipulate the currently executing step's results it looks like you are on the right track by using the parameters.  Because those are passed by reference they will propagate back to the caller.
Hope this helps,
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

Similar Messages

  • Result table data to be populated based on selection in the result list

    Hi,
    We have a parent data source "P" containing all the record types. Further we have two child data sources each having filters on exclusive record types(for ex. child1 containing record types X, Y, Z and child2 containing record types A, B).
    In our page we have a result list associated with data source child1(record types X, Y, Z) and result table associated with data source child2(record types A, B). There exists common attributes among the attributes present in result list and in the result table.
    Rest of the containers in the page namely search, breadcrumbs, guided navigation point to the parent data source("P") containing all the record types.
    Whenever we select a value from the guided navigation using the common attributes both the result list and result table are getting filtered.
    What we require is that, whenever an attribute(common attribute) is clicked in the result list, the data in the result table needs to get filtered based on the value of the attribute that is clicked.
    Is this possible? If so, pl. suggest how.

    Take a look at the Studio release notes for EID 2.4 http://docs.oracle.com/cd/E35976_01/studio.240/RELNOTES.txt a lot of little bugs like the one you describe have been resolved. If you haven't already done so you should upgrade to 2.4.

  • Different Color Text of Topic Titles by Child Project in Search Results List

    Does anyone know how I can change the text color to indicate the source project of a topic as displayed in the Search Results list?
    I have followed Peter Grainge's directions for setting up a parent project that has several child projects, one of which contains outdated version-specific information. Thanks, Peter!
    I would like it to be obvious to the user before they open a topic from the Search Results list that it is from the old legacy project.
    I have found where the font is set, (thanks to the RoboWizard), but I am not a Javascript programmer and am uncertain how to code the "if document is from this project, then use this font" logic.
    I would also like to put a "caption" below the "Search Results per page" line to explain the purpose of the color change.
    I am using RoboHelp HTML 8.0.2. I generate WebHelp output which is then FTP'd to our server.
    Thanks in advance!

    Hi Leon,
         Let me make sure that I understand your suggestion - I should change the title of each topic in the "legacy" knowledge base so that they each include a short identifier, such as "First Topic - Legacy"? If so, I suppose that would work, but I'd have to change 1,000 topics. The topic titles would no longer match the filenames (I'm trying to freeze changes to the old knowledge base to which there are many links from our user forum), which I suppose is not a big concern at this point.  I'll run some tests.
         That has also raised another question in my mind, but I'll post that separately. It's about the way Robohelp selects the text that is shown immediately after the title of the topic in the Search Results list.
         Thanks for taking the time to help!

  • IBase search result list not showing in Account Identification

    Hi Gurus,
    I'm new to CRM and we have an upgrade issue. We just migrated to EHP3 for SAP CRM 7.0. After the migration, the installed Base result list is not showing in the Account Identification screen. We have the requirement to show the installed base on the right side of the confirmed account and also the result list in case the customer have multiple equipments. The first part is working correct and it shows the data if there is only one equipment with the customer. But in cases where there are more than 1, the installed base view shows blank and also the result list does not show. Instead the Interaction History is displayed. I have checked all the forums and the config and it all looks correct. Here is the list of config that we have
    1) I have the Account Identification Profile created and assigned the Object Component 'ICCMP_IBASE'  to it with Auto Search checked ON. This I believe is for the IBase Details which is working fine for single equipments.
    2) Function Profile 'BPIDENT' with value of the Account Identification Profile has been assigned to the Business Profile.
    3) The Installed Base Profile 'DEFAULT_TREE' has been updated to UNCHECK 'Display Tree' as we want the result list.
    4) Function Profile 'IBASE' with value 'DEFAULT_TREE' has been assigned to the Business Profile.
    Am I missing something? The exact same config works perfectly in a box that has not yet been upgraded. Any help would be appreciated...

    Hi,
    I tested this issue and I can reproduce it in my environment. However, as far as I know, this behavior won't affect the usage of the address book.
    I searched the internal resource but I cannot find a bug report regarding this issue. If you have any suggestion about this issue, you can submit a feedback via:
    http://office.microsoft.com/en-US/suggestions.aspx
    Best Regards, 
    Steve Fan
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Add column to my tag result list

    Hi experts,
    In our new service desk tool (crm_ui), we want to add a column to a result list, but I haven't a clue how to add it.
    What we do is: we tag certain incidents with a term, and then we follow them up by adding the 'tag' widget on our start page.
    When we click on a certain tag that we used multiple times, we see a result list.
    But we only see two collums in this list: "operation number" and "description".
    How to add a third column: "status"?? I cannot find it anywhere in our viewconfiguration. There are no available fields with this label for the ZSOLMANPRO role.
    thx

    Hello Kenny,
    It is quite complex and you might not be able to archieve it by your own. It is not an ABAP-view. The steps wouold be like that:
    1. Open you view (screen) in WebUI (CRMUI).
    2. Click on an editable field or hyperlink in the view and press F2 until you get a popup.
    3. Read which component and view this is.
    4. Go to transaction BSP_WD_CMPWB and enter your component from step 3 and select the right view.
    5. Check in the configuration (the right one as shown in the popup of step 2) if you can add a field. I thought you already did that but eventually you did not.
    6. If the right field is not available you might try to add the attribute to the context node but this is more complex.
    Eventually steps 1-5 are already enough. All of this is WebUI configuration and if you looked your your view in SM34 it might indicate that you are not really familiar with it. So be careful.
    Best regards,
    Thomas Wagner

  • Passing result list from Contact search to Target group

    Hi,
    I have to pass the result list of Contact serch(BP_CONT_SEARCH) to Target group creation component(SEGED_TG). Can you give me the steps that I need to follow.
    Note: Here the contact structure is different in each component.
    Thanks.

    Yes Srikanth, you need to bind context of result list to SEGED_TG using component controller binding. Let me know if you have questions.
    But the question is did you make a navigation from the contact search result to target group creation or is it a standard functionality ?
    As per my knowledge we can navigate from Profile set creation creation screen or from Trade Promotions.

  • How to add a new field to an existing Generic Search result list?

    Good day,
    I'm new to the concepts of the Generic Search Framework.  I'm attempting to add a new field to an existing result list, and have that new field restricted to a value of "C".  This new field will not be displayed, it is only used to ensure that Invoice Documents with a DocStatus of "C" are returned to the B2B Application.
    From the *modification\generic-searchbackend-config.xml file, the existing
    <h4><property-group name="billing_resultlist_B2B_R3">
      <property name="BILLINGDOC" columnTitle="sbt.sbs.genericsearch.billing.invoice.title" parameterType="rowkey" hyperlink="b2b/documentstatusdetailprepare.do" linkParamClass="com.sap.isa.ui.uiclass.genericsearch.GenericSearchUIDynamicContent" linkParamMethod="buildAttributesForBillingDocumentDetails" linkTargetFrameName="form_input" />
      <property name="BILL_DATE" type="date" columnTitle="status.sales.date" writeUnderProperty="BILLINGDOC" defaultSortSequence="DESCENDING" />
      <property name="NET_VALUE" type="number" columnTitle="status.billing.detail.netvalue" fieldOutputHandlerClass="com.sap.isa.ui.uiclass.genericsearch.GenericSearchUIDynamicContent" fieldOutputHandlerMethod="buildBillingNetValue" cssClassName="amount" />
      <property name="CURRENCY" type="hidden" />
      <property name="PAYER" columnTitle="gs.hd.gl.partner" linkParamClass="com.sap.isa.ui.uiclass.genericsearch.GenericSearchUIDynamicContent" linkParamMethod="buildShowPartnerLinkSales" />
      <property name="PAYERS_GUID" type="hidden" />
      <property name="SD_DOC_CAT" type="hidden" />
      <property name="OBJECTS_ORIGIN" type="hidden" />
    </property-group>
    </h4>
    I'm trying to better understand how the R/3 tables and columns are specified in the Generic Search Framework.  I know that the R/3 table and field is: VBRK.RFBSK, but in the configuration XML files, I never see this exact information specified.   How it is specified to be a part of the result set?
    After reading the section in the Development and Extension Guide, I also learned about the "allowedValue" definition, and I believe that I will use that to specify the "C" value for the Invoice Document Status field.
    I would greatly appreciate any help.
    Thanks,
    _kevin

    Hi Kevin,
    this means you are working in this section of the generic-searchbackend-config.xml
                 <property-group name="SearchCriteria_B2B_Billing"
                                 useSearchRequestMemory="true">
    Below this property
                    <property name="IRT_BDH_BILL_TYPE"                    
                              type="box"
                              entityType="BEART_BILL_TYPE"
                              tokenType="EXP"
                              requestParameterName="rc_documenttypes"
                              label="gs.att.lbl.doc.type"
                              UIJScriptOnChange="GSloadNewPageR3(this);">
                        <allowedValue value="ORDER"           description="b2b.status.shuffler.key1val2"/>                   
                        <allowedValue value="QUOTATION"       description="b2b.status.shuffler.key1val1" />
                        <allowedValue value="INQUIRY"         description="b2b.status.shuffler.key1val11" />
                        <allowedValue value="ORDERTMP"         description="b2b.status.shuffler.key1val3" />
                        <allowedValue value="CONTRACT"        description="b2b.status.shuffler.key1val4" />
                        <allowedValue value="INVOICE"         description="b2b.status.shuffler.key1val5"  default="true"/>
                        <allowedValue value="CREDITMEMO"      description="b2b.status.shuffler.key1val6" /> 
                        <allowedValue value="DOWNPAYMENT"     description="b2b.status.shuffler.key1val7" />
                        <allowedValue value="AUCTION"         description="b2b.status.shuffler.key1val9" />
                    </property>
    please try adding this new property
                    <property name="DOCUMENT_STATUS(1)"
                              entityType="CL_CRM_REPORT_SET_STATUS"
                              tokenType="RAN"
                              type="hidden"
                              requestParameterName="rc_status_head1" value="C" />
    This should do the trick. Unfortunately, I don't have a E-Commerce scenario with an ERP backend for testing purposes available to you have to test it yourself. Keep me updated with the test results !      
    Philipp Koock
    SAP CRM Web Channel Consultant
    http://www.koock.net

  • Fix and Fix All buttons greyed out in Analyzed Results List

    The Fix and Fix All buttons are greyed out in the Analyzed Results List. This was working preTiger at least. Perhaps after my initial clean install of 10.4.1. Now running 10.4.3. Things I've tried to no avail:
    Reading the documentation and "Late Breaking News".
    Repaired permissions.
    Repaired disk. (found no problems)
    Ran Disk Warrior (found no problems)
    Trashed SountrackPro prefs file.
    Tried several existing and three new Audio File Projects on the internal and an external firewire drive.
    Searched for a similar topic in this forum.
    TIA for any help, Ken

    It works for me.
    First you have to select what you want to fix (e.g.
    clicks and pops) then press the analyze button to get
    a list of things to fix.
    Right after the analysis is done, if at least one
    thing was found to fix,you should see the "fix all"
    button not greyed out, but the "Fix" button will be
    greyed out until you actually click on one or more
    of the items in the analysis result list.
    Are you seeing something different from the behavior
    I've described?
    My experience and information is that Soundtrack Pro only finds clipped samples. Have you been able to fix them as well?

  • Export to spreadsheet from program result list (ALV Grid) via the web

    Hello alles!
    When executing a program (a report) using SAP WebGUI or the portal (Manager's Desktop/Launchpad etc.), exporting the result list to a spreadsheet doesn't seem to work. No error message, browser doesn't really hang, but nothing happens. Neither Excel, nor XML export, nor anything works.
    Export from the same program works just fine in SAP GUI.
    (SAP Note 314568 has some information about ALV Grid export limitations, but I can't make the XML export work either...)
    Could this be a configuration error in ITS? In that case, where..?
    Or is it something we just need to live with?
    Thank you in advance!
    Brgds, Caroline

    There is a known problem regarding exportation to Excel.
    Try the following path :
    Tools --> Macro --> Security
    Then go to the "Trusted Publishers" tab and tick the "Trust acess to Visual Basic Project" option.
    This should do the trick.

  • How to access the result list in teststand after execution using labwindows​/cvi

    I am developing a user interface in labwindows/cvi that runs multiple teststand sequence files and would like to combine their reports (generated in teststand) into a single file at the end of a UUT. What is the best way to do this? At the moment, I'm trying to access the result list local variable after the execution has ended using API calls from labwindows/cvi and an end-of-execution callback event but those run-time variables do not exist anymore. How do I get a hold of the result list array at the end of an execution? I would like to grab this variable and pass it along from sequence to sequence using labwindows/cvi and not teststand itself. Is this possible? Any help would be great.
    Thanks in advance,
    Luis

    Hey Luis,
    Check out the response to this thread at the NI TestStand board here!

  • Who's Who - Restrict Result List

    Dear,
    My problem today is that my Who's Who displays all the positions from the backend in the result list.
    For example, if Mr X was in entity A til end of Dec07 and then he changed position and was in entity B. Then Who's who displayed all the results.
    That is to say, i have two records for Mr X in SAP so both records are displayed in my who's who.
    > My question is then the following: how to restrict who's who result? So that i can have only the current record in my result list and NOT ALL the records???
    Thanks a lot
    Regards,
    Cyrielle

    Tim is correct with one rider. If you add a group to the list it will unpack the group membership EXCEPT where the users are members by virtue of it being their primary group.
    Therefore, you can give read and/or write permission to a large group of individuals without including them in the mailing list.
    Note, Apple defaults to putting everyone into GUID 20. So you have to make changes to the users if you want any selectivity, but it works.

  • Group by in Result List

    Hi,
    Is it possible to use Group By in the Result list? I can't find it in the configuration panel, but maybe this is possible in another way.
    Thanks!

    Result Lists can only show data at the grain of the Endeca record, so no.  Usually Results Lists are used to show descriptions or other unstructured portions of the record.   It sounds as if you may have your unstructured data duplicated across multiple records after denormalizing.  Is this the case?  Is there an option to keep the unstructured attribute(s) from duplicating?

  • Remove "Export Spreadsheet" button in result list for search on BP in WebUI

    Hi everybody,
    Could someone tell me how to remove the standard button "Export spreadsheet" from the result list of a search for Customer and Account in the WebUI?
    Is it possible to do this by using the transaction BSP_WD_CMPWB "BSP WD Component Workbench"?
    The component is CRM_UI_FRAME and I'm afraid that if I do some changes to this one, the modification will affect all othe transaction with search...
    I'm open to other solutions (if exists ;o)
    Thanks in advance,
    Luis.

    Hello Michael,
    First thing, thanks for your quick answer :o)
    It 's the first time that I use the BSP WD Component Workbench so I don't know what you are talking about, sorry :o)
    I understand that I have to put the parameter "downloadToExcel" to False but I don't know where it is.
    I looked in the tree node "View layout" of the component CRM_UI_FRAME.
    I didn't find the tag "chtmlb" in the code.
    Could you please explain me a little more about this (or just where to look ;o)
    Thank you very much,
    Luis.

  • Edit the  results list in  sql developer 1.5

    Hi
    is there someone that know if it is possible to make a querry in sql developer and then edit in the results list?
    I have tryed but can not se how.
    In my company we are using both toad 9.7 and sql developer and the users would like to update the data in the results list .It is possible in toad and can be done with less risk.
    thank you
    steen ostersen

    No, but you can vote on http://htmldb.oracle.com/pls/otn/f?p=42626:39:2887745563411926::NO::P39_ID:4902 to add weight for implementing sooner...
    Have fun,
    K.

  • Multiple Selection in Search Result List in PCUI

    Hi,
    Our requirement is to allow creation of new records in list view of the PCUI application CRMM_ACCOUNT. I'm using old floor plan CRM 4.0 to meet this requirement. But this is causing a problem. It's not allowing multi select in the search result list (Event INIT, Screen Element SRMS). If I change the screen element to SRME, it allows multiple selection (thru selection checkboxes) but does not allow creation of new records in list view.
    Also, how to activate the multi-valued search on certain fields. I've already checked the "Multi-Value" check box for the relevant field.
    Any help on this will be much appreciated.
    Regards,
    Vishal

    a®s wrote:
    Hi,
    You can find lot of thread in this for forum for your query.
    example
    a®s
    Thanks ! it's helpful!   But my requirement is a little bit different. (Sorry I didn't make it clear)
    I created a table maintenance (SM30) for a table. The F4 Search help should be applied to a field of the table when a user creates a new entry. I hope it makes clear.
    btw: I have awarded some points! Because it's also good to know some other ways:)

Maybe you are looking for