Read work center details for a notification
Hello All,
Is there an FM that I can use to read the work center that is assigned to a service / maintenance notification?
The problem that I have is that I use BAPI_ALM_NOTIF_GET_DETAIL to read the notification header.
In case of service notifications of type S1, I get the PP_WORKCENTER information but for notifications of type S3, i get the PM_WORCENTER.
I need one FM which will get the work center and plant for me so that I do not have to check the notification types.
Does anybody know of one?
Best Regards,
Mithun
Hi;
Did you see:
http://www.aboutoracleapps.com/2007/08/oracle-general-ledger.html
Information Center : Oracle Cost Management [ID 1417659.2]
Regard
Helios
Similar Messages
-
Read Routing and work center details from transfer order
Hello
I am using transaction LT31 to print a form for the transfer order.
The customer wants me to print a field that is in the work center details of the routing for this material and plant.
I can see this data with transaction CA02 where i enter material and plant,and then the work centers are beeing displayed.From here i can double click on the work center and see the field Supply area that i have to print.
My answer now is,how to read details on the work center starting from my transfer order number.Which is the table connection between transfer order table LTAK and the tables where i can find the work center details.
Thank youI have found the solution:
ltak-tanum = mseg-tbnum
read aufnr from mseg and go to afko
mseg-aufnr = afko-aufnr
read plnnr from afko and go to plpo
afko-plnnr = plpo-plnnr
from plpo read arbid and go to crhd
plpo-arbid = crhd-objid
from here,we can find the arbpl and the field that i was looking for PRVBE -
Blocking of work center capacity for capacity planning
How can i block a work center capacity for capacity planning during Machine breakdown( via a Preventive maintenance order)?
i believe it will reduce machine capacity, yet how can i view this, against the previous capacity? is there a possible report or can it be shown through a transaction?Hi,
In capacity header details screen not exactly as "can be used for capacity evaluation " but
"relevent to finite sceduling"
"can be used for several operations"
"long term planning"
these all indicators you can deflag this and check the results ,it may helpful to you. -
FM / TABLES TO GET WORK CENTER DETAILS
hi friends,
can any1 suggest me functional module or tables where i can fetch work center details like we get in CA03Use This FM
CR_WORKSTATION_READ_ROUTING,ROUTING_DISPLAY
Use table CRHD ,MAPL
Please reward if useful. -
Need to get cost center details for a requisition
Hi All,
Could you please help me to find table for cost center details for a requsition.
Thanks,Hi;
Did you see:
http://www.aboutoracleapps.com/2007/08/oracle-general-ledger.html
Information Center : Oracle Cost Management [ID 1417659.2]
Regard
Helios -
Work center assignment for plant
Hi experts,
I just want to know how can one assign the work centers for the given plant.
Useful points will be rewarded.
Regards,
Sankar.I just want to know how can one assign the work centers for the given plant
When you create work center in the initial screen we need to mention the plant as well.
regards-
Ravi Kumar -
Main work center for notification
which table stores main work centers for service notifications stored and how do i link work center table with notification table
Hi,
<b>CRHD - Work Center Header
QMEL - Quality Notification [/b
U can link this 2 table with the field QMEL-ARBPL = CRHD-ARBPL
Reward Points if it is Useful.
Thanks,
Manjunath MS -
Estimated Start time in notification based on Time defined in Work center
Hi,
Following Satish post- I am trying to find solution to the same problem so i will appreciate any advise.
When the notification is created ,the estimated start time should be based on priority .This in iteslf is pretty straight & simple. However if the reported time is after work hours or towards the end of work hours or weekends , the estimated start time should be reflected accordingly based on factory calender & work center time schedule.
In other words the estimated start time should fall within the window of work hours available.
Example:
Presume the the working hours for the Organization are 8:00AM to 5:00 PM & a call comes for service at 4:00 PM. Also say , for high priority the defined response time is 5 hours. In such a instance the estimated start date should be set to next day at 11:00 AM.
Appreciate your help for the configuration that need to be done
ShirlyHi,
I think ur talking about notification malfunction start time .. currently it just takes the system date and time by default .. and if you need work center timings i believe first u need the eqpt /F.loc to get the work center data in notificaiton ...
I think u can get these dates can be modified while saving by using user exit : QQMA0014 QM/PM/SM: Checks before saving a notification or BADI IF_EX_NOTIF_EVENT_SAVE , but at the same time the eqpt or F.loc have work center details in master record ...or work center needs to be entered manually in notification ..., pls check up ..
regrds
pushpa -
Work center for Production order
Hi,
In my report I need to link the production order to work center. I have got all the information for the production order from AFKO, but I am unable to find a way to link it to the work center?
Thanks
VamsiHi Vamsi,
Refer value AFKO-AUFPL, Use AFVC-AUFPL to fetch the operation details of an order. Fetch AFVC-ARBID for AFVC-AUFPL, use CRHD-ARBID to get Work center details.
Regards,
Prasobh.
Award your marks, if this has helped you. -
User Exit or DB-Table for Work Center (CR01)
Hi!
I have an external software which must be triggered when the user changes a work center in SAP (transaction CR01,CR02). I was looking for an user exit to do what ever is necessary but I couldn't find one.
So, does anybody know an user exit or BADI for work center?
Also possible:
The database table where work center are stored. So I could poll against this table and check if a work center was changed. I found the table SGOSHIST which log all modified objects in SAP. So this could maybe used to check for modified work center, I think.
Thanks,
Konrad> You can check the BADI definition from transaction SE18,
> 'LTRM_WORK_CNTR_DTRM', this might be helpful,
How can I check this BADI. If I use SE18, it doas not exist, buit if I try to create it, the system tells me that it already exists in the SAP Original System... and asks me if I want to create a copy of it! I don't know what to do at this point!
> Work center details are avilable in CRHD table, you can
> look for CR* from SE11 transaction,
I know, but if you change the description of the work center, it is stored in CRTX. there are a lot of CR* tables. It would be helpful to have a table which is updated every time a work center is modified!
Thanks,
Konrad -
Editing logging details for notifications from Facebook
Does anyone know if it's possible to change/edit the logging details for the notification from Facebook (well in fact for that matter for anything else too).
When I logged them in for the first time I didn't realise I was logged in on facebook with wife's page and now I seem to be getting her notifications instead of mine.I am having this issue too! Just posted a question regarding this.
I own a 5C and spent hours on the phone to tech support who also contacted Apple but they say it's a Facebook issue and was told to contact them direct.
Facebook do not respond to individuals so I'm concerned that we are not going to get a solution. Apple don't seem bothered!
I switched from android recently and never had this problem......strange! -
Bapi for change work center data
HIi All
I need BAPI to change work center data for all categories and work center change transactions .....IR02 ,CNR2,CR02.
Thanks in advance .Hai,
Try the fm CRAP_WORKCENTER_CREATE
BAPI_BUS2054_CHANGE_MULTI
CRAP_WORKCENTER_CREATE
Regards,
Venkat -
ACTIVATE WORK FLOW FOR QM NOTIFICATION
Dears
Please tell me the step for activating work flow template for Quality notification
If we activate it effect any other module?
A QM consultant can be activate it or it required technical person
Any in put will be highly appricaited
Thanks in advance
Faisal
Edited by: Muhamed Faisal on Jul 21, 2011 8:00 PMHi,
For all three tasks, it is very conveniant to assign ROLE or USER itself to the task.
But for that Purchse activity would be your new and separate task it self, for which you should new task, where you can assign the RULE for the Agent. That may make it optional as per your requriement.
Hope it'll work for you.
Update us to help you more, reward points to help you better!
Regards,
Shyamal -
Multiple Work Center for single internal activity ?
If more than one work center used for single internal activity how can work center be allocated ?
Hi Yogesh,
I understand that, you have a project activity in which different groups of people are working and you want to plan costs for all these groups of employees under the same project activity.
To achieve this, create different activity elements under that activity and assign specific WCs and Work duration to all these activity elements so that system will calculate aggregated costs and scheduling dates accordingly.
Hope this helps -
Work-center timings not reflecting in maintenance order.
Hi,
My requirement is, I want the work-center timings to reflect in my call object (Maintenance Order) generated through a maintenance plan.
My scenario is: I've made a work-center with the following data,
wrkcntr category as 0005; usage 004; control key PM06 with scheduling indicator checked;
in capacities start-finish timings as, 06:00-14:00; operating time of 8hrs, and factory calendar is chosen for maint. people.
The order type say pm08 is selected.
now in the maint. plan we choose this work center in the planning data field.
Task-list is also attached and the data are OK.
in maint. plan scheduling parameter shift factor etc NOT given.
Now when after schedulling I got one order with the
SchedStart: DD.MM.YYYY 06:00
Sched.Fin.: NEXT DATE 06:00
but I need the date to be 06:00 to 14:00 as in the respective work-center.
For for fastly solving the problem my analysis:
I checked the order,goto operation tab,goto dates tab and found that basic finish time of activity is 24:00:00
If this is the reason than how to make it 08:00:00 default for this order type.
Thanks in advance,Hi Tyag,
the details are cmins as below
Erl. start: 19.09.2008 06:00:00 Earl. fin. 20.09.2008 06:00:01
LatestStart: 19.09.2008 06:00:00 LatestFin. 20.09.2008 06:00:01
Act. start: 00:00:00 Act. finish 00:00:00
FcstFinish 00:00:00
Restriction
StartPoint
End 24:00:00
I am new to this and need your help.
The req is how to reflect wrk center timing in the wrk order generated through a maintenance plan.
Regards,
sanjay
Edited by: ganesh sarasvati on Sep 23, 2008 11:47 AM
Maybe you are looking for
-
Is there any way to correct a child's birthdate with regard to an Apple ID and Family Sharing? It should be an understandable request, since an input mistake was made with setting her birthdate. I did not know that setting the birthdate would be an i
-
My phone is stuck with the little loading circle
my phone seems to be stuck on a black screen with a loading circle i have plugged it in to i tunes and every thing what can i do?
-
Several instances of MDB accessing a Q and one rolling back a message
I have one input queue being served by several instances of an identical MDB. When a problem occurs with an MDB processing one of the messagse read on the queue (for instance, it could not forward the answer, the bean is
-
ALways love my iphone. Now itunes is ALWAYS unresponive to my iphone. Just stops working when I plug it in. downloaded older version, newer version.....use my iphone for my pdf book in college.....this is just ridiculous....
-
Where are flash and shockwave executables
I want to point MediaPlayerConnectivity to these players but I can't seem to find exe files for these players. How can I tell MPC to use these? Thanks