Work center assignment  for  plant

Hi experts,
         I just want to know how can one assign the work centers for the given plant.
Useful points will be rewarded.
Regards,
Sankar.

I just want to know how can one assign the work centers for the given plant
When you create work center in the initial screen we need to mention the plant as well.
regards-
Ravi Kumar

Similar Messages

  • Blocking of work center capacity for capacity planning

    How can i block a work center capacity for capacity planning during Machine breakdown( via a Preventive maintenance order)?
    i believe it will reduce machine capacity, yet how can i view this, against the previous capacity? is there a possible report or can it be shown through a transaction?

    Hi,
    In capacity header details screen not exactly as "can be used for capacity evaluation " but
    "relevent to finite sceduling"
    "can be used for several operations"
    "long term planning"
    these all indicators you can deflag this and check the results ,it may helpful to you.

  • Designing Work Center & Assigning in Routing For Textile Industry

    Dear All
      There are around 20 Looms in weaving.As per clients requirement to map indvidual Loom efficiency each loom is considered as indvidual work center.In routing its possible to assign only one work center.
      Kindly suggest me how to map this scenerio.The client requires machine wise output.Should i raise 20 Production orders for indvidual Work centers.
    Regards
    Jay

    hi,
    i am sending the information about
    Maintaining Individual Capacities in the workcenter,
    Prerequisites
    Individual capacities are used in capacity planning for more detailed resource planning. For instance, you can divide a machine capacity into several individual machines and maintain an available capacity for each machine. Capacity requirements can then be distributed among the individual capacities. If you do not maintain an available capacity for an individual capacity, it is calculated from the operating time of the capacity to which the individual capacity has been assigned.
    Individual capacities have the same capacity categories as the capacities to which they are assigned.
    In order to be able to create individual capacities the CapCatPers indicator for the capacity category must not be set in Customizing.
    Procedure
    Assigning Individual Capacities
    On the header screen choose Goto ® Individual capacities.
    The Assignments to Individual Capacities screen appears.
    Define the individual capacities.
    Maintaining Available Capacities for Individual Capacities
    In the Assignments to Individual Capacities screen place the cursor on the individual capacity whose available capacity you want to maintain.
    If the Maintnd indicator has been set, then an available capacity has been maintained for this individual capacity.
    thanks
    sbabu

  • Read work center details for a notification

    Hello All,
    Is there an FM that I can use to read the work center that is assigned to a service / maintenance notification?
    The problem that I have is that I use BAPI_ALM_NOTIF_GET_DETAIL to read the notification header.
    In case of service notifications of type S1, I get the PP_WORKCENTER information but for notifications of type S3, i get the PM_WORCENTER.
    I need one FM which will get the work center and plant for me so that I do not have to check the notification types.
    Does anybody know of one?
    Best Regards,
    Mithun

    Hi;
    Did you see:
    http://www.aboutoracleapps.com/2007/08/oracle-general-ledger.html
    Information Center : Oracle Cost Management [ID 1417659.2]
    Regard
    Helios

  • Dynamic work center assignment

    Hi,
    In our process for each process (operation) there are more than one physical work center.
    The assignment of the order to each work center is decided only at the time of operation execution.
    How can we map this scenario?
    Can we change the work center during the confirmation at operation level?
    Regards
    Ramakanth

    Dear Ramakanth,
    1) Yes , when you enter order number & operation number, system will pick the work center
    from Prd order in CO11N
    2) Now just change the work center as required, system will not stop you
    3) coming to costs, Variance will be calculated for changed work center
    Regards
    Madhu Kumar

  • IW51-52 - Updating fields Main work center and Maintenance plant

    Hello Experts.
    I Have a task which includes recieving a file and using the data to create new notifications. I need to update the fields above (Data elements GEWRK & SWERK ) but i can't find the right BAPI or Function which will do this work for me.
    Thanks for your help.
    Motty Gal.

    Hi,
      Thanks for your response. Actually after doing further R&D, I saw that work_ctr requires the object key of the work center. I fetched the OBJECTKEY from CRHD & passed. It automatically updated both work center & plant associated.
        Awarding you points for your help.
    Thanks buddy!!!

  • Work center assignment HR - PS

    Hi everyone
    is there anything else to do to assign work center in HR except what I've already accomplished:
    1. work centers have been created in CR01and customized in OP42
    2. via T-Code PO01 I assigned a work center to a position (connection A!003).
    What else should be done? How can I see the work center in organizational plan (PPOSE) besides Detailed description of an object???
    Will PS team-members be able to observe my work center from HR in their T-Codes???
    Best regards,
    Eldar

    HI,
    you cannot see ur work center directly in the Org.Structure.Please use this report RHXSTR06 which will give the existing work centers that are assigned to ur Organization Unit.
    Thanks and Regards
    Swati

  • Change of Cost Center Assignment for Organization Unit in HR

    Hi,
    Recently my client is changing their cost center number from 6char to 5 char format. I have created customized mapping table to link between old cost center number and new ones.
    Create new cost center referencing to old cost center is done too.
    However, for each Personnel Number, i need to change the cost center assignment which link to org unit. I have done this too manually at t-code PPOM. How can I do this for mass change? I have a list of org unit number with me. Is there any standard program to do this or i should use LSMW ?
    How do I make sure for each Personnel number, their cost center assignment will change to new 5 char format in the end as required?
    I am new to HR module.
    Thank you for your help.

    Hi,
    As Sikandar said, you will have to write an LSMW or BDC ( where in you can check and validate the input Cost centers) using PP01 or Po10.
    Also I think if you use BDC or LSMW you will have to run the RHINTE30 report. Check the documentation on RHINTEXX reports to get better idea.
    Cheers..
    Ajay

  • How to know persons work center assignment

    Hi All,
    I need to know to which workcenter, the person is assigned.
    (means, I have a Personal NUmber and want to find out his workcenter)
    There is one transaction which i used earlier also but now i am not remembering that.
    Please let me know how I can know the persons workcenter asignment
    Regards,
    mamta

    Hi mamta,
    1. Go to PP01,  Select the Object Person, and Check the Infotype 1001 Relationship, Select Overview and check the
    the entries, whether the Person is related to any Work Center.
    2. Or note down the person, Position Number in IT0001,  Go to PP01, Select the Object Position, Give the Position Number, and  Check the Infotype 1001 Relationship, Select Overview and check the the entries, whether the Position is related to any Work Center.
    You can check either way,  if you have assigned the Person - Work center relationship you can use the first one
    If you have assigned the Position - Work center relation ship you can use the second one.
    Regards
    Venu

  • Cost Center / Profit Center -- Validation for Plant Address Change

    Hi There - One of our team [PTP] have a updated St'Adress for a Plant. From FI, is there something needs to be validated? and How do i find cost center/profit center related to that plant. I belive there is no assignment of those to plants?
    Thanks
    Sri

    no, the "accounting" object that can be related to the plant is the valuation area, but it is updated automatically.
    Paolo

  • Profit Center Assignment for Component of Sub Contracting PO

    Hello all!
    I apologize in advance if this is not the correct forum to post this question in. Additionally, I am an ABAPer with a focus in SD and MM, so much of FI is foreign to me.
    To the problem...
    Currently when a MIGO 101 is processed for a Sub Contracting PO Line item, a consumption transaction (543) is generated for the component materials on the PO Line. These consumption transactions are "tied", this is how my finance co-worker described it, to a Cost Center dedicated to Sub Contracting.
    We would like to change the configuration as follows:
    When the consumption transaction posts, it "ties" to the Profit Center (and thus cost center) of the Parent SKU (actual material received on PO Line) of the transaction.
    Is this possible?
    Thank you,
    Steven Coolbaugh

    Hi Steven:
    Not sure if I understood correctly your requirement but let me try to explain:
    For consumption items (Account assignment category K in PO line), it is consumed immediately on GR and consumption is posted to a cost center attached to PO line. And that is what happening in your exising process also, right?
    Now when you said "TO Be" change as consumption ties to the profit center (and then to cost center) of parent SKU??
    It is other way round. A cost center is linked to one profit center (whereas as a profit center can have many cost centers attached to it). Also since profit center is not a TRUE cost object (it is a statistical object), PO line would need a true cost object like cost center. So based on the information you provided in your post, it is not technically possible to book consumption at profit center (And then to cost center).
    Are they two separate cost centers (one for sub contracing and one for Parent SKU)? If yes, can you attach parent SKU cost center to PO line (from business point of view) so that consumption posts directly to parent SKU and then to the attached profit center?
    Hope it helps.
    Thanks.
    Rahul

  • Profit center assignment for Raw Materials and Store and spares

    Hi All,
    We have an issue with org structure while defining  Profit Centre.
    Presently we have  25 depots and 5 Manufacturing Plants and 10 type of Divisions.
    Plant and Depots are mapped with Business area
    10  type of Finished Goods and we have defined Divisions for the same in SD module.
    For the same we have defined 10 Profit Centre in order to get division wise profitability.
    10 Profit center will be used in FG materials  and we will be able to get the postings and profitability with product wise.
    But  for Raw materials and Stores material which profit center need to be assigned.
    Kindly help me in this regard.
    Regards,
    Sahil K

    Hi,
    profit centre basically used for the collection of cost and revenue  which are incurred and generated in an organization , so if your organization has created any profit centre which are assigned to the cost centre of manufaturing or production , those cost cost centre u can assigned to the raw materials.
    To assign  profit centre to raw materials - at the time of creation of Material master(mm01)  for raw materials you can choose  costing view at organizational level and can assign the cost PCTR which your assigning to cost centre.
    To assign division- you can choose the division according to the finished good wise if your divisions are segregated according to finished goods wise.(assignment of division  to the material master -according to the raw materials or spare and parts used to produce particular finished goods).
    Hopefully the above explanation clarify your doubt.
    Regards
    Binapani.

  • Profit center assignment for Tax Component value in MIRO

    Dear SAP Gurus,
    As per our clents requirement the Tax component has to be posted to a Profit Center while doing MIRO.
    How to deal with this.
    Profit center default assign during MM transaction
    Account Assigned PO:
    1.     The Cost center/Asset and GL  is assigning in PO for each line item
    2.     Conditions for each line item
    3.     Tax code for each line item
    Goods Receipt:
    1.     GR/IR clearing Account as per PO (Account Assignment as per Default GL and as per PO -CC & PC)
    2.     The Conditions Account assigned as per PO (Account Assignment as per Default GL and as per PO -CC & PC)
    3.     Tax code value: Account Assigned as per PO (Default GL as per Assignment, but without PC Assignment)
    Invoice Posting:
    1.        GR/IR clearing Account as per PO (Account Assignment as per Default                  GL and as per PO -CC & PC)
    2.     The Conditions Account assigned as per PO (Account Assignment as per Default GL and as per PO -CC & PC)
    3.     Tax code Value: Account Assigned as per PO (Default GL as per Assignment, but without PC Assignment)
    pl help in solving the above problem.
    thanks in advance
    APPA RAO K.

    Hi,
    Try SAP Note 105024, 409520.  That might be of help.
    Thanks
    Krishna.

  • Cost center assignment to plant

    Dear ALL,
    I have a request from the cleint that they have created a new cost center and they want to add to a plant. how to do this?
    please advice me
    TIA
    kOGI

    Hi
    Check tarnsaction OKZ2. My understanding is u assign plants to Overhead keys and overhead keys to costcenters in KS01
    Reagrds
    Pratiksha

  • Factory Calender assigned to Plant & resource/Work center

    Hello,
    If we have assigned the Factory Calender "XX" which has 5 working day(Monday to Friday) with no Special rules & no Holiday Calender to Plant & "YY" Factory Calender to Work center which has 365 days working with no no Special rules & no Holiday Calender.Now, when MRP creates Planned Orders for FERT material It did not create it on Weekends(i.e. on Saturday & Sunday) though the factory calender assigned is  "YY" (which has 365 days working )in work center.Why?
    Actually it should have consider the Work center assigned Calender for Capacity planning & Schedulling purpose.
    If I assign the Factory Calender "YY"  to plant then it will create the procurement proposal on weekends which is not acceptable to external procurement MRP Controller as plant office works only 5 days.
    Please guide.

    Dear
    Goto CR02/03 , select the Capacity tabe "hat" and u will fined there is tabe "Available Capacity " .U have to maintain the Active version ok.
    Basically , the active version is used for scheduling and capacity planning. If you have not entered an active version, the standard available capacity is used, even if an available capacity version has been entered.
    At the same u have to check out the below requirement :
    you must maintain the following data in the capacity header:
    1.The grouping, that defines which shift sequences and shift definitions can be used to maintain the available capacity
    2.The number of the active version of available capacity
    3.The base unit of measure of the available capacity
    3.The factory calendar, that is the basis of the available capacity-Workcentre
    If you do not enter a factory calendar , the system uses the default calendar for the plant.
    I hope in your case , u have the shift sequence of 5 work days for the calander you have assinged in work centre .
    Please check all those n come back .
    Reward points if usefull.
    Regards
    Jia

Maybe you are looking for