Reader 9.3 critical failure

I recently had the auto updater install reader 9.3 on my system and after a reboot acrobat reader simply will not function on any level.
The update seems to have caused corruption to other windows functions as a few in house apps, daemon tools, and steam are having crashing issues. These issues can only be the result of this software update as no other change to the computer took place before these errors began to pop up.
I have tried uninstalling and reinstalling adobe 9.3 in safe mode - No effect. Reader fails to open with the message "Acrobat failed to load its Core DLL"
I have rolled back to 3 restore points before the update - No effect. Reader fails to open with the message "Acrobat failed to load its Core DLL"
I have manually deleted and then used windows uninstall before attempting reinstallation - No effect. Reader fails to open with the message "Acrobat failed to load its Core DLL"
What could possibly have been changed in this update to cause such a sudden and massive failure of applications which have nothing to do with PDF files?

pwillener wrote:
"Acrobat failed to load its Core DLL" literally returns thousands of hits on Google.  I have looked at some, but very few offer any insight.  Two possibilities
your antivirus software or firewall may prevent the Reader installation from completing.  Try to disable before attempting to reinstall.
after uninstalling, try to delete all Adobe Reader references from your Program Files\Adobe and Program Files\Common Files\Adobe (but not in the registry).
Dod this work?
I have similar problem with version 9.4

Similar Messages

  • RV320 FW upgrade 1.1.1.06 = critical failure

    Hello,
    I have upgraded the router to your latest 1.1.1.06 firmware and after it reboots (which btw takes ages) it comes back with:
    Critical failure. Please contact support.
    Any idea on this? it is unusable now!?

    Hi Walter
    From your description, "Blinking green PWR LED and solid red DIAG LED is all I get", the device is still at boot loader phase. So you tried tftp method but doesn't work? Can you try again? you can use this tftp.exe (http://tftpd32.jounin.net/) to upload the firmware to 192.168.1.1. Below are some more details about the tftp upgrade.
    1.power off
    2.power on with pressing the reset button, wait for 10s, untill the diag LED turn red, and power LED keep flashing.
    3.set lan pc to 192.168.1.100
    4.use tftp client to put the firmware to device. Windows command for example: tftp -i 192.168.1.1 put RV32X_v1.1.1.06_20131206-code.bin. Or using other tftp client like "http://tftpd32.jounin.net/"
    5.after tftp finish, the device will reboot by itself.
    6.after startup, power led is on, diag led is off.

  • Cisco Secure Desktop access denied and critical failure errors

    Hi
    Please can you assist me with the following Cisco Secure Desktop error. 
    "Access Denied
    Your system failed to be validated by the Cisco Secure Desktop and will not be granted access.
    Critical failure.
    Cisco Secure Desktop must run and validate your system to proceed. Please verify your browser settings and configuration and retry."
    Under "Weblaunch" Platform detection, Sun Java and Java Detection are ticked.  The other items are unticked.
    Thank you in advance.

    I'm having the same problem with Lion 10.8.4
    I've tried three different browsers with similar results.
    Firefox 22.0
    Chrome Version 27.0.1453.116
    Safari 6.05
    Any ideas?  I know we have the Secure desktop set to scan for antivirus for all connections.  I know that my AV is on the list and supposedly compatible.

  • Option Icon 452 is causing a critical failure. Suggestions?

    Option Icon 452 is causing a critical failure as soon as I put it into the USB slot.  It seems that loading the wrong drivers for it or thinking its something that its.
    Each            time I put the 452 into the USB slot I immediately get an error in which the screen            takes on a shade of gray and a black box in 6 languages            appears saying "You need to restart your computer. Hold down            the power button until it turns off" - I cannot do anything            besides that and if I leave the modem attached and restart            the same error appears as soon as it boots up. Once I take            it off I'm able to restart normally again. Not sure what            that problem is but it seems rather critical.
    I'm not having any other problems with my macbook and I have a friend who tested the Option iCon 452 on his macbook and had no problems. So I'm kinda muddled.
    thanks for any suggestions.

    Runaway org.postfix.master if you want to take a look at it. Linc.
    Tried a old hack, no go.
    https://discussions.apple.com/thread/3184945?tstart=0

  • I can't read acsm files on my e-reader after transferring them from the pc with ADE. it seems to work, but then when I try to open the files on the e-reader it says "open failure". what's wrong?

    I can't read acsm files on my e-reader after transferring them from the pc with ADE. it seems to work, but then when I try to open the files on the e-reader it says "open failure". what's wrong?

    The acsm file is not the book, it is a ticket to get the book.  I sometimes get library books online, here is what I do.
    1. Start ADE on the computer
    2. Go to library website and find the book I want to download.
    3. Click on the download link
    4. In windows 7 a box opens asking whether I want to open( or run) or save the acsm file
    5. Click open/run and ADE downloads the book into the "Library"
    6. Transfer the book (epub file) to the reader.

  • Importing XML to Final Cut 7 - Critical Failure

    Hello!
    I've been trying to import an XML file that another editing company gave to us and have been met with failure.  Tried to do it twice and got the same message both times:  "xml translation aborted due to critical error".
    The client used Adobe Premiere Pro, and the XML file in question seems to have the COLOR logo on it.  I assume that they put it through color and then sent us the XML.
    We should have all the media needed; they gave us a duplicate copy of the drive they worked off of.
    I don't really have much experience at all with XML, so any help is appreciated.
    I took a screen capture of the error log; hopefully I can attach this.
    System info:
    Mac Pro 5,1
    16GB RAM
    Final Cut 7
    System 10.6.8

    You're asking a lot of an XML.
    Something to try:
    select all clips and copy them. create a new timeline with the same sequence properties. make sure CTI is at beginning and paste.
    in this new sequence, select a clip that has not had speed changed (100%). right click on it and select copy properties. select all clips and paste properties.
    BE ADVISED THAT THIS WILL CHANGE ALL CLIPS TO THE SAME PROPERTIES AS THE ORIGINAL.
    this may reset all your In & Out points to their proper duration. if so, you can then adjust the timing of the requisite clips as necessary.
    For best results using XML files, there should be NO: effects, dissolves, "black slugs," audio mixing or anything other than a plain vanilla straight cut.
    HTH,

  • My iBooks were fine yesterday,today unable to read, message comes up; failure to load book because requested resource is missing".  What do they want?

    My iBooks were fine yesterday, today unable to get into book, message comes up, "failure to load book because requested resource missing"  
    It doesn't tell me what resource is missing, & why could I read this 12 hours ago fine.

    I've got a solution, it's not so perfect, but i bet someone would come out with a better one based on mine.
    Solution:
    Step 1: close iBooks app and delete all existing book data
    Since I have recently lost all files in my ibooks library due to something wrong with Time Machine backup, I could delete all my book data without anything to worry about.
    I deleted all files in:
    /Users/[usename]/Library/Containers/com.apple.BKAgentService/Data/Documents/iBoo ks
    and the iBook configuration files (well, the whole folder):
    /Users/zlw/Library/Containers/com.apple.iBooksX
    It doesn't matter if you have deleted the whole iBooksX folder, what you would lose at most is the bookmark data, etc.
    deleting all the files inside the iBooks folder of BKAgentService will enable you to redownload the file that you want correctly.
    Step 2:
    reopen iBooks and you will be able to download the book that you want.
    Possible improvement:
    there is a Books.plist file in the iBooks folder of BKAgentService, it might be possible to modify the plist and and the folders so that it's not necessary to delete them all.

  • Reader 9.3 Install Failure - Error 1606

    When attempting to install v9.3 in Windows Vista I get the following error message:
    Error 1606.Could not access network location
    %APPDATA%\.
    I have downloaded AdbeRdr930_en_US.exe from the adobe web site and I am running this program - that's what leads to the error.
    I have reviewed the information in microsoft's kb886549 and all registry entries appear to be correct
    Please help.
    Thanks.
    Here are the two registry keys:
    ?Key Name:          HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders
    Class Name:        <NO CLASS>
    Last Write Time:   4/11/2010 - 5:13 PM
    Value 0
      Name:            AppData
      Type:            REG_EXPAND_SZ
      Data:            %USERPROFILE%\AppData\Roaming
    Value 1
      Name:            Cache
      Type:            REG_EXPAND_SZ
      Data:            %USERPROFILE%\AppData\Local\Microsoft\Windows\Temporary Internet Files
    Value 2
      Name:            Cookies
      Type:            REG_EXPAND_SZ
      Data:            %USERPROFILE%\AppData\Roaming\Microsoft\Windows\Cookies
    Value 3
      Name:            Desktop
      Type:            REG_EXPAND_SZ
      Data:            %USERPROFILE%\Desktop
    Value 4
      Name:            Favorites
      Type:            REG_EXPAND_SZ
      Data:            %USERPROFILE%\Favorites
    Value 5
      Name:            History
      Type:            REG_EXPAND_SZ
      Data:            %USERPROFILE%\AppData\Local\Microsoft\Windows\History
    Value 6
      Name:            Local AppData
      Type:            REG_EXPAND_SZ
      Data:            %USERPROFILE%\AppData\Local
    Value 7
      Name:            My Music
      Type:            REG_EXPAND_SZ
      Data:            %USERPROFILE%\Music
    Value 8
      Name:            My Pictures
      Type:            REG_EXPAND_SZ
      Data:            %USERPROFILE%\Pictures
    Value 9
      Name:            My Video
      Type:            REG_EXPAND_SZ
      Data:            %USERPROFILE%\Videos
    Value 10
      Name:            NetHood
      Type:            REG_EXPAND_SZ
      Data:            %USERPROFILE%\AppData\Roaming\Microsoft\Windows\Network Shortcuts
    Value 11
      Name:            Personal
      Type:            REG_EXPAND_SZ
      Data:            %USERPROFILE%\Documents
    Value 12
      Name:            PrintHood
      Type:            REG_EXPAND_SZ
      Data:            %USERPROFILE%\AppData\Roaming\Microsoft\Windows\Printer Shortcuts
    Value 13
      Name:            Programs
      Type:            REG_EXPAND_SZ
      Data:            %USERPROFILE%\AppData\Roaming\Microsoft\Windows\Start Menu\Programs
    Value 14
      Name:            Recent
      Type:            REG_EXPAND_SZ
      Data:            %USERPROFILE%\AppData\Roaming\Microsoft\Windows\Recent
    Value 15
      Name:            SendTo
      Type:            REG_EXPAND_SZ
      Data:            %USERPROFILE%\AppData\Roaming\Microsoft\Windows\SendTo
    Value 16
      Name:            Startup
      Type:            REG_EXPAND_SZ
      Data:            %USERPROFILE%\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup
    Value 17
      Name:            Start Menu
      Type:            REG_EXPAND_SZ
      Data:            %USERPROFILE%\AppData\Roaming\Microsoft\Windows\Start Menu
    Value 18
      Name:            Templates
      Type:            REG_EXPAND_SZ
      Data:            %USERPROFILE%\AppData\Roaming\Microsoft\Windows\Templates
    Value 19
      Name:            {374DE290-123F-4565-9164-39C4925E467B}
      Type:            REG_EXPAND_SZ
      Data:            %USERPROFILE%\Downloads
    ?Key Name:          HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\explorer\User Shell Folders
    Class Name:        <NO CLASS>
    Last Write Time:   11/2/2006 - 8:50 AM
    Value 0
      Name:            Common Desktop
      Type:            REG_EXPAND_SZ
      Data:            %PUBLIC%\Desktop
    Value 1
      Name:            Common Documents
      Type:            REG_EXPAND_SZ
      Data:            %PUBLIC%\Documents
    Value 2
      Name:            CommonPictures
      Type:            REG_EXPAND_SZ
      Data:            %PUBLIC%\Pictures
    Value 3
      Name:            CommonMusic
      Type:            REG_EXPAND_SZ
      Data:            %PUBLIC%\Music
    Value 4
      Name:            CommonVideo
      Type:            REG_EXPAND_SZ
      Data:            %PUBLIC%\Videos
    Value 5
      Name:            {3D644C9B-1FB8-4f30-9B45-F670235F79C0}
      Type:            REG_EXPAND_SZ
      Data:            %PUBLIC%\Downloads
    Value 6
      Name:            Common Start Menu
      Type:            REG_EXPAND_SZ
      Data:            %ProgramData%\Microsoft\Windows\Start Menu
    Value 7
      Name:            Common Programs
      Type:            REG_EXPAND_SZ
      Data:            %ProgramData%\Microsoft\Windows\Start Menu\Programs
    Value 8
      Name:            Common Startup
      Type:            REG_EXPAND_SZ
      Data:            %ProgramData%\Microsoft\Windows\Start Menu\Programs\Startup
    Value 9
      Name:            Common AppData
      Type:            REG_EXPAND_SZ
      Data:            %ProgramData%
    Value 10
      Name:            Common Templates
      Type:            REG_EXPAND_SZ
      Data:            %ProgramData%\Microsoft\Windows\Templates

    This may happen due to incorrect registry value type for Recent,   in the following key:
    HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \  CurentVersion \ Explorer  \ User Shell Folders
    Click Start, Run and type Regedit.exe
    Navigate to HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \  CurentVersion \ Explorer  \ User Shell Folders
    In the right-pane, double-click Recent and set its data to:
    %Userprofile%\Recent
    Important: The Value type must be  of REG_EXPAND_SZ type. If it is of  REG_SZ type, delete the  value, and  then create a new value of the correct type.
    Close Regedit.exe and restart Windows.
    It appears you've checked the registry and the Value types are OK.
    Make sure the Recent value is properly set.
    Let me know if that works.

  • Reader 10.1.2 failure to open in windows 7 home premium

    After several uninstalls and installs the reader will start to open then a pop up appears and says a program has caused adobe to stop working and then windows attempts to solve the problem and shuts it down. Any help would be appreciated.

    After several uninstalls and installs the reader will start to open then a pop up appears and says a program has caused adobe to stop working and then windows attempts to solve the problem and shuts it down. Any help would be appreciated.

  • Uninstalling reader 9.1.3 failure;  installation failure reader 10.1.1with unable to contact tracker

    I would like to update to adobe reader 10.1.1 and when I attempted download/install with Internet Explorer it produced:  unable to contact trackers.  The it opened another web page and produced:
    Adobe Reader did not install successfully
    You can troubleshoot your installation with the following resources:
    Can't download or install Reader?
    Troubleshoot Adobe Reader installation | Windows
    Reader Help and Support Center
    Community Help
    Frequently asked questions
    When I go to control panel> add remove programs: adobe reader 9.1.3 is 138 MB and when I click on remove it produces:  The patch package could not be opened.  Verify that the patch package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer patch package.
    1) How do I uninstall adobe reader 9.1.3 with the above problem?
    2) I have installed revo unistaller and have not yet learned how to use it.  Is this what I would need to uninstall reader 9.1.3 or is there something that I need to download to then be able to use add remove programs and have it uninstalled?
    3) I would like to install the latest version of adobe reader and the download/install produced: unable to contact trackers.  What does this mean and how does it get corrected so that I can download and install the latest version
    Currently when I read or download PDF files they are opened properly with Adobe reader.  It is the goal to eliminate the old version and install the new version.
    My computer is a dell laptop inspiron 9400 with windows XP home SP3, Intel CPU 2600 @ 1.66 GHz, 2.0 GB RAM, ATI Mobility Radeon 1400
    The other Adobe software products that are installed are Adobe AIR, Adobe Flash Player 11 ActiveX, and Adobe Flash Player 11 Plugin
    I tired the download/install with another browser (Safari) and it went through initializing, downloading, and installing then Please wait while Windows configures Adobe Reader X (10.1.1) then Gathering required information then Time remaining 0 secs with all blue squares.  Set up need to restart your system do you want to restart now?  I choseno and when I viewed Adobe Reader Installer it had Adobe Reader Installation failed unknown error 96%  Then I chose finish.  It then produced One of the installations requires a reboot.  Do you wish to perform it now.  I will choose yes and have it reboot. 
    What happened with the attempted intall with Internet Explorer that it failed.  If Adobe Reader X installs with Safari will the PDF files opened with this browser use Adobe Reader X and will the PDF files opened with Internet Explorer use Adobe Reader 9.1.3?  I would like to have just one version of Adobe Reader and not take up the hard drive space.
    I will reboot now and see what happens.  Please comment on what to do if the installation fails for Adobe Reader X and please comment on how to uninstall Adobe Reader 9.1.3 too in addition to any other comments about the installation problem.
    Thx

    I was able to solve this problem with the inability to uninstall adobe reader 9.1.3 and this program is now uninstalled by viewing control panel > add remove programs.
    It happened by luck by using a battery of Microsoft Fix its.  To tune up my computer I ran one fix it after another and then found one that Troubleshoots installation and uninstallition problems.
    http://support.microsoft.com/fixit/
    Run NowLearn MoreDiagnose and fix program installing and uninstalling problems automatically
    Automatically diagnoses problems that can prevent installing and uninstalling programs on your computer. Assists with programs that will not uninstall correctly and programs blocking installation of new program installations.
    It found corrupt patch registry keys and fixed it.
    I selected the program that I wanted to uninstall and it was successful in uninstalling the older edition of adobe reader:
    Program Install and Uninstall troubleshooterPublisher details
    Issues found
    Cannot install or uninstall a programCannot install or uninstall a program
    Looks for problems that can stop you installing and uninstalling a
    programFixed
    Uninstall and cleanup? Adobe Reader 9.1.3Succeeded
    Issues checked
    Corrupt Patch Registry keysCorrupt Patch Registry keys
    Detects corrupt or missing patch cacheChecked
    Problem registry keyProblem registry key
    Detects problems with the registry (Wow64 issue)Checked
    Issues foundDetection details
    6Cannot install or uninstall a programFixed
    Looks for problems that can stop you installing and uninstalling a program
    Uninstall and cleanup? Adobe Reader 9.1.3Succeeded
    Looks for problems that can stop you installing and uninstalling a
    program
    Issues checkedDetection details
    6Corrupt Patch Registry keysChecked
    Detects corrupt or missing patch cache
    Fixing patch registry problemsNot Run
    Detected patch registry problems
    6Problem registry keyChecked
    Detects problems with the registry (Wow64 issue)
    Fixing the problem registry key (Wow64 issue)Not Run
    Finding and removing the problem registry key (Wow64 issue)
    Detection details
    Collection information
    Computer Name: AN
    Windows Version:5.1
    Architecture:x86
    Time:10/12/2011 10:19:52 AM
    Publisher details
    Program Install and Uninstall troubleshooter
    Looks for problems that can stop you installing and uninstalling a program
    Package Version:1.2
    Publisher:Microsoft Corporation

  • Reading From Master data failure

    I have enhanced 0VENDOR_ATTR with ZTERM field from LFM1 table and everything is working fine ...I have added ZPMNTTRMS as an attribute in 0VENDOR and loaded the data its working fine .But when I was using this ZPMNTTRMS in a DSO and say read from master data and took the source field as 0vendor ...then Iam not able to see the values for this info object...Ofcourse 0VENDOR is loading fine....Can any one let me know what is the issue here ? / Is there any routiene / some code needs to be written some where to get the ZPMNTTRMS values in DSO ...Please advice ASAP...
    regards

    hi nw2004s,
    have you performed change run ?
    rsa1->tools->apply attribute/hierarchy change run (or RSATTR)
    hope this helps.

  • Izettle credit card reader smart connect app failure

    Hi,
    I own a Xperia Z1Compact Android version 4.4.4 with the integrated SmartConnect software and a pin&signature iZettle credit card reader.
    I see why it is not compatible with such device... the SmartConnect app will interfere the operation of the iZettle during the chiping process by requesting to assign an app to be launched by the "app button" which happens not to be there, but being the signal of the izettle working...
    I undestand that iZettle may have no time to develop such workarounds for any smartphone on the market, but it would be really helpful if you could provide some sort of guidance so independent developers can make it work for you. I am not a developer, just a user with some understanding.
    Since disabling SmartConnect app will result in the izettle reader not being recognized -as I found out already- I can think of two possible solutions:
    - An extension for Xperia devices that allows to assign the "app button" of a headset to point and launch the chiping process on the izettle, so it work with SmartConnect by assigning that extension app.
    - An app that enables to use the port normally while disabling the SmartConnect feature.
    We all Xperia users will be very glad to know that izettle is now compatible with our devices.
    PLEASE SONY, FIX SMART CONNECT APP TO ACCEPT IZETTLE READERS!!!!
    Best Regards!!!

    You should contact Izelttle directly
    https://www.izettle.com/se/press/releases/55506389299/izettle-goes-android
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Puter suffered a critical failure.  My new laptop WIN 8 and I lost my Acrobat 9.0.

    How do I get a new serial number from Adobe?  Or will I have to purchase a new version of acrobat?

    Serial numbers are on your account - if you ever bothered to register or bought a download - or on your original install media. Refer to this:
    Find a serial number
    If you have a serial, downloads are here:
    Direct Download Links for Adobe Software
    You should expect some issues on Win 8, though. Other than that: No serial, no activation. Adobe doesn't know what you don't know and indeed you wil lthen have to buy a new license.
    Mylenium

  • HCK Studio encountered a critical failure and needs to exit now-Gee, I better not touch that "Apply Filters" button again!

    Exception Details:
    Microsoft.Windows.Kits.Hardware.ObjectModel.ProjectManagerException: Failed to revert filters for taskResult with Id: 2092. ---> System.Data.SqlClient.SqlException: Incorrect syntax near ')'.
       at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
       at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
       at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async, Int32 timeout)
       at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
       at Microsoft.Windows.Kits.Hardware.ObjectModel.DBConnection.TaskResultAdjuster.SetFiltersAppliedColumnForResults(Boolean setFilterAppliedFlag, SqlProvider provider, List`1 results)
       at Microsoft.Windows.Kits.Hardware.ObjectModel.DBConnection.TaskResultAdjuster.Revert(ITaskResultFilterHistory originalFilterHistory, ReadOnlyCollection`1 testLogs)
       --- End of inner exception stack trace ---
       at Microsoft.Windows.Kits.Hardware.ObjectModel.DBConnection.TaskResultAdjuster.Revert(ITaskResultFilterHistory originalFilterHistory, ReadOnlyCollection`1 testLogs)
       at Microsoft.Windows.Kits.Hardware.ObjectModel.DBConnection.WttTask.RevertStatistics(ITaskResultFilterHistory filterHistory)
       at Microsoft.Windows.Kits.Hardware.FilterEngine.DatabaseFilterEngine.RevertExpiredFilters(Task taskResult, List`1 expiredFilterInfo)
       at Microsoft.Windows.Kits.Hardware.FilterEngine.DatabaseFilterEngine.RevertExpiredFiltersToChildTasks(Task taskResult, Dictionary`2 expiredFilterCache)
       at Microsoft.Windows.Kits.Hardware.FilterEngine.DatabaseFilterEngine.RevertExpiredFilters(Project project)
       at Microsoft.Windows.Kits.Hardware.FilterEngine.BaseFilterEngine.Filter(Project project)
       at Microsoft.Windows.Kits.Hardware.UI.Views.Results.UpdateFiltersLink_Click(Object sender, RoutedEventArgs e)
       at System.Windows.Input.CommandBinding.OnExecuted(Object sender, ExecutedRoutedEventArgs e)
       at System.Windows.Input.CommandManager.ExecuteCommandBinding(Object sender, ExecutedRoutedEventArgs e, CommandBinding commandBinding)
       at System.Windows.Input.CommandManager.FindCommandBinding(CommandBindingCollection commandBindings, Object sender, RoutedEventArgs e, ICommand command, Boolean execute)
       at System.Windows.Input.CommandManager.FindCommandBinding(Object sender, RoutedEventArgs e, ICommand command, Boolean execute)
       at System.Windows.Input.CommandManager.OnExecuted(Object sender, ExecutedRoutedEventArgs e)
       at System.Windows.UIElement.OnExecutedThunk(Object sender, ExecutedRoutedEventArgs e)
       at System.Windows.Input.ExecutedRoutedEventArgs.InvokeEventHandler(Delegate genericHandler, Object target)
       at System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
       at System.Windows.RoutedEventHandlerInfo.InvokeHandler(Object target, RoutedEventArgs routedEventArgs)
       at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
       at System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
       at System.Windows.UIElement.RaiseEvent(RoutedEventArgs args, Boolean trusted)
       at System.Windows.Input.RoutedCommand.ExecuteImpl(Object parameter, IInputElement target, Boolean userInitiated)
       at System.Windows.Input.RoutedCommand.ExecuteCore(Object parameter, IInputElement target, Boolean userInitiated)
       at MS.Internal.Commands.CommandHelpers.CriticalExecuteCommandSource(ICommandSource commandSource, Boolean userInitiated)
       at System.Windows.Controls.Primitives.ButtonBase.OnClick()
       at System.Windows.Controls.Button.OnClick()
       at System.Windows.Controls.Primitives.ButtonBase.OnMouseLeftButtonUp(MouseButtonEventArgs e)
       at System.Windows.UIElement.OnMouseLeftButtonUpThunk(Object sender, MouseButtonEventArgs e)
       at System.Windows.Input.MouseButtonEventArgs.InvokeEventHandler(Delegate genericHandler, Object genericTarget)
       at System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
       at System.Windows.RoutedEventHandlerInfo.InvokeHandler(Object target, RoutedEventArgs routedEventArgs)
       at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
       at System.Windows.UIElement.ReRaiseEventAs(DependencyObject sender, RoutedEventArgs args, RoutedEvent newEvent)
       at System.Windows.UIElement.OnMouseUpThunk(Object sender, MouseButtonEventArgs e)
       at System.Windows.Input.MouseButtonEventArgs.InvokeEventHandler(Delegate genericHandler, Object genericTarget)
       at System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
       at System.Windows.RoutedEventHandlerInfo.InvokeHandler(Object target, RoutedEventArgs routedEventArgs)
       at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
       at System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
       at System.Windows.UIElement.RaiseTrustedEvent(RoutedEventArgs args)
       at System.Windows.UIElement.RaiseEvent(RoutedEventArgs args, Boolean trusted)
       at System.Windows.Input.InputManager.ProcessStagingArea()
       at System.Windows.Input.InputManager.ProcessInput(InputEventArgs input)
       at System.Windows.Input.InputProviderSite.ReportInput(InputReport inputReport)
       at System.Windows.Interop.HwndMouseInputProvider.ReportInput(IntPtr hwnd, InputMode mode, Int32 timestamp, RawMouseActions actions, Int32 x, Int32 y, Int32 wheel)
       at System.Windows.Interop.HwndMouseInputProvider.FilterMessage(IntPtr hwnd, WindowMessage msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
       at System.Windows.Interop.HwndSource.InputFilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
       at MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
       at MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o)
       at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs)
       at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(Object source, Delegate method, Object args, Int32 numArgs, Delegate catchHandler)
    Event Log Entries:
    [3/19/2015 12:40 PM]<Studio UI> Exception Message:
    Microsoft.Windows.Kits.Hardware.ObjectModel.ProjectManagerException: Failed to revert filters for taskResult with Id: 2092. ---> System.Data.SqlClient.SqlException: Incorrect syntax near ')'.
       at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
       at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
       at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async, Int32 timeout)
       at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
       at Microsoft.Windows.Kits.Hardware.ObjectModel.DBConnection.TaskResultAdjuster.SetFiltersAppliedColumnForResults(Boolean setFilterAppliedFlag, SqlProvider provider, List`1 results)
       at Microsoft.Windows.Kits.Hardware.ObjectModel.DBConnection.TaskResultAdjuster.Revert(ITaskResultFilterHistory originalFilterHistory, ReadOnlyCollection`1 testLogs)
       --- End of inner exception stack trace ---
       at Microsoft.Windows.Kits.Hardware.ObjectModel.DBConnection.TaskResultAdjuster.Revert(ITaskResultFilterHistory originalFilterHistory, ReadOnlyCollection`1 testLogs)
       at Microsoft.Windows.Kits.Hardware.ObjectModel.DBConnection.WttTask.RevertStatistics(ITaskResultFilterHistory filterHistory)
       at Microsoft.Windows.Kits.Hardware.FilterEngine.DatabaseFilterEngine.RevertExpiredFilters(Task taskResult, List`1 expiredFilterInfo)
       at Microsoft.Windows.Kits.Hardware.FilterEngine.DatabaseFilterEngine.RevertExpiredFiltersToChildTasks(Task taskResult, Dictionary`2 expiredFilterCache)
       at Microsoft.Windows.Kits.Hardware.FilterEngine.DatabaseFilterEngine.RevertExpiredFilters(Project project)
       at Microsoft.Windows.Kits.Hardware.FilterEngine.BaseFilterEngine.Filter(Project project)
       at Microsoft.Windows.Kits.Hardware.UI.Views.Results.UpdateFiltersLink_Click(Object sender, RoutedEventArgs e)
       at System.Windows.Input.CommandBinding.OnExecuted(Object sender, ExecutedRoutedEventArgs e)
       at System.Windows.Input.CommandManager.ExecuteCommandBinding(Object sender, ExecutedRoutedEventArgs e, CommandBinding commandBinding)
       at System.Windows.Input.CommandManager.FindCommandBinding(CommandBindingCollection commandBindings, Object sender, RoutedEventArgs e, ICommand command, Boolean execute)
       at System.Windows.Input.CommandManager.FindCommandBinding(Object sender, RoutedEventArgs e, ICommand command, Boolean execute)
       at System.Windows.Input.CommandManager.OnExecuted(Object sender, ExecutedRoutedEventArgs e)
       at System.Windows.UIElement.OnExecutedThunk(Object sender, ExecutedRoutedEventArgs e)
       at System.Windows.Input.ExecutedRoutedEventArgs.InvokeEventHandler(Delegate genericHandler, Object target)
       at System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
       at System.Windows.RoutedEventHandlerInfo.InvokeHandler(Object target, RoutedEventArgs routedEventArgs)
       at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
       at System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
       at System.Windows.UIElement.RaiseEvent(RoutedEventArgs args, Boolean trusted)
       at System.Windows.Input.RoutedCommand.ExecuteImpl(Object parameter, IInputElement target, Boolean userInitiated)
       at System.Windows.Input.RoutedCommand.ExecuteCore(Object parameter, IInputElement target, Boolean userInitiated)
       at MS.Internal.Commands.CommandHelpers.CriticalExecuteCommandSource(ICommandSource commandSource, Boolean userInitiated)
       at System.Windows.Controls.Primitives.ButtonBase.OnClick()
       at System.Windows.Controls.Button.OnClick()
       at System.Windows.Controls.Primitives.ButtonBase.OnMouseLeftButtonUp(MouseButtonEventArgs e)
       at System.Windows.UIElement.OnMouseLeftButtonUpThunk(Object sender, MouseButtonEventArgs e)
       at System.Windows.Input.MouseButtonEventArgs.InvokeEventHandler(Delegate genericHandler, Object genericTarget)
       at System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
       at System.Windows.RoutedEventHandlerInfo.InvokeHandler(Object target, RoutedEventArgs routedEventArgs)
       at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
       at System.Windows.UIElement.ReRaiseEventAs(DependencyObject sender, RoutedEventArgs args, RoutedEvent newEvent)
       at System.Windows.UIElement.OnMouseUpThunk(Object sender, MouseButtonEventArgs e)
       at System.Windows.Input.MouseButtonEventArgs.InvokeEventHandler(Delegate genericHandler, Object genericTarget)
       at System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
       at System.Windows.RoutedEventHandlerInfo.InvokeHandler(Object target, RoutedEventArgs routedEventArgs)
       at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
       at System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
       at System.Windows.UIElement.RaiseTrustedEvent(RoutedEventArgs args)
       at System.Windows.UIElement.RaiseEvent(RoutedEventArgs args, Boolean trusted)
       at System.Windows.Input.InputManager.ProcessStagingArea()
       at System.Windows.Input.InputManager.ProcessInput(InputEventArgs input)
       at System.Windows.Input.InputProviderSite.ReportInput(InputReport inputReport)
       at System.Windows.Interop.HwndMouseInputProvider.ReportInput(IntPtr hwnd, InputMode mode, Int32 timestamp, RawMouseActions actions, Int32 x, Int32 y, Int32 wheel)
       at System.Windows.Interop.HwndMouseInputProvider.FilterMessage(IntPtr hwnd, WindowMessage msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
       at System.Windows.Interop.HwndSource.InputFilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
       at MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
       at MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o)
       at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs)
       at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(Object source, Delegate method, Object args, Int32 numArgs, Delegate catchHandler)
    [3/19/2015 12:40 PM]<FilterEngine> Reverting filters found in test 'Sleep and PNP (disable and enable) with IO Before and After (Certification - Software Device)' instance='apple_number_1'
    [3/19/2015 12:40 PM]<FilterEngine> Reverting 4 expired filters for project 'apples4sale64'
    [3/19/2015 12:09 PM]<Studio UI> Exception Message:
    Microsoft.Windows.Kits.Hardware.ObjectModel.ProjectManagerException: Failed to revert filters for taskResult with Id: 2092. ---> System.Data.SqlClient.SqlException: Incorrect syntax near ')'.
       at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
       at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
       at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async, Int32 timeout)
       at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
       at Microsoft.Windows.Kits.Hardware.ObjectModel.DBConnection.TaskResultAdjuster.SetFiltersAppliedColumnForResults(Boolean setFilterAppliedFlag, SqlProvider provider, List`1 results)
       at Microsoft.Windows.Kits.Hardware.ObjectModel.DBConnection.TaskResultAdjuster.Revert(ITaskResultFilterHistory originalFilterHistory, ReadOnlyCollection`1 testLogs)
       --- End of inner exception stack trace ---
       at Microsoft.Windows.Kits.Hardware.ObjectModel.DBConnection.TaskResultAdjuster.Revert(ITaskResultFilterHistory originalFilterHistory, ReadOnlyCollection`1 testLogs)
       at Microsoft.Windows.Kits.Hardware.ObjectModel.DBConnection.WttTask.RevertStatistics(ITaskResultFilterHistory filterHistory)
       at Microsoft.Windows.Kits.Hardware.FilterEngine.DatabaseFilterEngine.RevertExpiredFilters(Task taskResult, List`1 expiredFilterInfo)
       at Microsoft.Windows.Kits.Hardware.FilterEngine.DatabaseFilterEngine.RevertExpiredFiltersToChildTasks(Task taskResult, Dictionary`2 expiredFilterCache)
       at Microsoft.Windows.Kits.Hardware.FilterEngine.DatabaseFilterEngine.RevertExpiredFilters(Project project)
       at Microsoft.Windows.Kits.Hardware.FilterEngine.BaseFilterEngine.Filter(Project project)
       at Microsoft.Windows.Kits.Hardware.UI.Views.Results.UpdateFiltersLink_Click(Object sender, RoutedEventArgs e)
       at System.Windows.Input.CommandBinding.OnExecuted(Object sender, ExecutedRoutedEventArgs e)
       at System.Windows.Input.CommandManager.ExecuteCommandBinding(Object sender, ExecutedRoutedEventArgs e, CommandBinding commandBinding)
       at System.Windows.Input.CommandManager.FindCommandBinding(CommandBindingCollection commandBindings, Object sender, RoutedEventArgs e, ICommand command, Boolean execute)
       at System.Windows.Input.CommandManager.FindCommandBinding(Object sender, RoutedEventArgs e, ICommand command, Boolean execute)
       at System.Windows.Input.CommandManager.OnExecuted(Object sender, ExecutedRoutedEventArgs e)
       at System.Windows.UIElement.OnExecutedThunk(Object sender, ExecutedRoutedEventArgs e)
       at System.Windows.Input.ExecutedRoutedEventArgs.InvokeEventHandler(Delegate genericHandler, Object target)
       at System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
       at System.Windows.RoutedEventHandlerInfo.InvokeHandler(Object target, RoutedEventArgs routedEventArgs)
       at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
       at System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
       at System.Windows.UIElement.RaiseEvent(RoutedEventArgs args, Boolean trusted)
       at System.Windows.Input.RoutedCommand.ExecuteImpl(Object parameter, IInputElement target, Boolean userInitiated)
       at System.Windows.Input.RoutedCommand.ExecuteCore(Object parameter, IInputElement target, Boolean userInitiated)
       at MS.Internal.Commands.CommandHelpers.CriticalExecuteCommandSource(ICommandSource commandSource, Boolean userInitiated)
       at System.Windows.Controls.Primitives.ButtonBase.OnClick()
       at System.Windows.Controls.Button.OnClick()
       at System.Windows.Controls.Primitives.ButtonBase.OnMouseLeftButtonUp(MouseButtonEventArgs e)
       at System.Windows.UIElement.OnMouseLeftButtonUpThunk(Object sender, MouseButtonEventArgs e)
       at System.Windows.Input.MouseButtonEventArgs.InvokeEventHandler(Delegate genericHandler, Object genericTarget)
       at System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
       at System.Windows.RoutedEventHandlerInfo.InvokeHandler(Object target, RoutedEventArgs routedEventArgs)
       at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
       at System.Windows.UIElement.ReRaiseEventAs(DependencyObject sender, RoutedEventArgs args, RoutedEvent newEvent)
       at System.Windows.UIElement.OnMouseUpThunk(Object sender, MouseButtonEventArgs e)
       at System.Windows.Input.MouseButtonEventArgs.InvokeEventHandler(Delegate genericHandler, Object genericTarget)
       at System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
       at System.Windows.RoutedEventHandlerInfo.InvokeHandler(Object target, RoutedEventArgs routedEventArgs)
       at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
       at System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
       at System.Windows.UIElement.RaiseTrustedEvent(RoutedEventArgs args)
       at System.Windows.UIElement.RaiseEvent(RoutedEventArgs args, Boolean trusted)
       at System.Windows.Input.InputManager.ProcessStagingArea()
       at System.Windows.Input.InputManager.ProcessInput(InputEventArgs input)
       at System.Windows.Input.InputProviderSite.ReportInput(InputReport inputReport)
       at System.Windows.Interop.HwndMouseInputProvider.ReportInput(IntPtr hwnd, InputMode mode, Int32 timestamp, RawMouseActions actions, Int32 x, Int32 y, Int32 wheel)
       at System.Windows.Interop.HwndMouseInputProvider.FilterMessage(IntPtr hwnd, WindowMessage msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
       at System.Windows.Interop.HwndSource.InputFilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
       at MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
       at MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o)
       at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs)
       at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(Object source, Delegate method, Object args, Int32 numArgs, Delegate catchHandler)
    [3/19/2015 12:09 PM]<FilterEngine> Reverting filters found in test 'Sleep and PNP (disable and enable) with IO Before and After (Certification - Software Device)' instance='apple_number_1'
    [3/19/2015 12:09 PM]<FilterEngine> Reverting 4 expired filters for project 'apples4sale64'
    [3/19/2015 12:03 PM]<Studio UI> Exception Message:
    Microsoft.Windows.Kits.Hardware.ObjectModel.ProjectManagerException: Failed to revert filters for taskResult with Id: 2092. ---> System.Data.SqlClient.SqlException: Incorrect syntax near ')'.
       at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
       at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
       at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async, Int32 timeout)
       at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
       at Microsoft.Windows.Kits.Hardware.ObjectModel.DBConnection.TaskResultAdjuster.SetFiltersAppliedColumnForResults(Boolean setFilterAppliedFlag, SqlProvider provider, List`1 results)
       at Microsoft.Windows.Kits.Hardware.ObjectModel.DBConnection.TaskResultAdjuster.Revert(ITaskResultFilterHistory originalFilterHistory, ReadOnlyCollection`1 testLogs)
       --- End of inner exception stack trace ---
       at Microsoft.Windows.Kits.Hardware.ObjectModel.DBConnection.TaskResultAdjuster.Revert(ITaskResultFilterHistory originalFilterHistory, ReadOnlyCollection`1 testLogs)
       at Microsoft.Windows.Kits.Hardware.ObjectModel.DBConnection.WttTask.RevertStatistics(ITaskResultFilterHistory filterHistory)
       at Microsoft.Windows.Kits.Hardware.FilterEngine.DatabaseFilterEngine.RevertExpiredFilters(Task taskResult, List`1 expiredFilterInfo)
       at Microsoft.Windows.Kits.Hardware.FilterEngine.DatabaseFilterEngine.RevertExpiredFiltersToChildTasks(Task taskResult, Dictionary`2 expiredFilterCache)
       at Microsoft.Windows.Kits.Hardware.FilterEngine.DatabaseFilterEngine.RevertExpiredFilters(Project project)
       at Microsoft.Windows.Kits.Hardware.FilterEngine.BaseFilterEngine.Filter(Project project)
       at Microsoft.Windows.Kits.Hardware.UI.Views.Results.UpdateFiltersLink_Click(Object sender, RoutedEventArgs e)
       at System.Windows.Input.CommandBinding.OnExecuted(Object sender, ExecutedRoutedEventArgs e)
       at System.Windows.Input.CommandManager.ExecuteCommandBinding(Object sender, ExecutedRoutedEventArgs e, CommandBinding commandBinding)
       at System.Windows.Input.CommandManager.FindCommandBinding(CommandBindingCollection commandBindings, Object sender, RoutedEventArgs e, ICommand command, Boolean execute)
       at System.Windows.Input.CommandManager.FindCommandBinding(Object sender, RoutedEventArgs e, ICommand command, Boolean execute)
       at System.Windows.Input.CommandManager.OnExecuted(Object sender, ExecutedRoutedEventArgs e)
       at System.Windows.UIElement.OnExecutedThunk(Object sender, ExecutedRoutedEventArgs e)
       at System.Windows.Input.ExecutedRoutedEventArgs.InvokeEventHandler(Delegate genericHandler, Object target)
       at System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
       at System.Windows.RoutedEventHandlerInfo.InvokeHandler(Object target, RoutedEventArgs routedEventArgs)
       at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
       at System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
       at System.Windows.UIElement.RaiseEvent(RoutedEventArgs args, Boolean trusted)
       at System.Windows.Input.RoutedCommand.ExecuteImpl(Object parameter, IInputElement target, Boolean userInitiated)
       at System.Windows.Input.RoutedCommand.ExecuteCore(Object parameter, IInputElement target, Boolean userInitiated)
       at MS.Internal.Commands.CommandHelpers.CriticalExecuteCommandSource(ICommandSource commandSource, Boolean userInitiated)
       at System.Windows.Controls.Primitives.ButtonBase.OnClick()
       at System.Windows.Controls.Button.OnClick()
       at System.Windows.Controls.Primitives.ButtonBase.OnMouseLeftButtonUp(MouseButtonEventArgs e)
       at System.Windows.UIElement.OnMouseLeftButtonUpThunk(Object sender, MouseButtonEventArgs e)
       at System.Windows.Input.MouseButtonEventArgs.InvokeEventHandler(Delegate genericHandler, Object genericTarget)
       at System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
       at System.Windows.RoutedEventHandlerInfo.InvokeHandler(Object target, RoutedEventArgs routedEventArgs)
       at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
       at System.Windows.UIElement.ReRaiseEventAs(DependencyObject sender, RoutedEventArgs args, RoutedEvent newEvent)
       at System.Windows.UIElement.OnMouseUpThunk(Object sender, MouseButtonEventArgs e)
       at System.Windows.Input.MouseButtonEventArgs.InvokeEventHandler(Delegate genericHandler, Object genericTarget)
       at System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
       at System.Windows.RoutedEventHandlerInfo.InvokeHandler(Object target, RoutedEventArgs routedEventArgs)
       at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
       at System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
       at System.Windows.UIElement.RaiseTrustedEvent(RoutedEventArgs args)
       at System.Windows.UIElement.RaiseEvent(RoutedEventArgs args, Boolean trusted)
       at System.Windows.Input.InputManager.ProcessStagingArea()
       at System.Windows.Input.InputManager.ProcessInput(InputEventArgs input)
       at System.Windows.Input.InputProviderSite.ReportInput(InputReport inputReport)
       at System.Windows.Interop.HwndMouseInputProvider.ReportInput(IntPtr hwnd, InputMode mode, Int32 timestamp, RawMouseActions actions, Int32 x, Int32 y, Int32 wheel)
       at System.Windows.Interop.HwndMouseInputProvider.FilterMessage(IntPtr hwnd, WindowMessage msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
       at System.Windows.Interop.HwndSource.InputFilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
       at MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
       at MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o)
       at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs)
       at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(Object source, Delegate method, Object args, Int32 numArgs, Delegate catchHandler)
    [3/19/2015 12:03 PM]<FilterEngine> Reverting filters found in test 'Sleep and PNP (disable and enable) with IO Before and After (Certification - Software Device)' instance='apple_number_1'
    [3/19/2015 12:03 PM]<FilterEngine> Reverting 4 expired filters for project 'apples4sale64'
    [3/19/2015 12:02 PM]<Studio UI> Exception Message:
    Microsoft.Windows.Kits.Hardware.ObjectModel.ProjectManagerException: Failed to revert filters for taskResult with Id: 2092. ---> System.Data.SqlClient.SqlException: Incorrect syntax near ')'.
       at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
       at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
       at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async, Int32 timeout)
       at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
       at Microsoft.Windows.Kits.Hardware.ObjectModel.DBConnection.TaskResultAdjuster.SetFiltersAppliedColumnForResults(Boolean setFilterAppliedFlag, SqlProvider provider, List`1 results)
       at Microsoft.Windows.Kits.Hardware.ObjectModel.DBConnection.TaskResultAdjuster.Revert(ITaskResultFilterHistory originalFilterHistory, ReadOnlyCollection`1 testLogs)
       --- End of inner exception stack trace ---
       at Microsoft.Windows.Kits.Hardware.ObjectModel.DBConnection.TaskResultAdjuster.Revert(ITaskResultFilterHistory originalFilterHistory, ReadOnlyCollection`1 testLogs)
       at Microsoft.Windows.Kits.Hardware.ObjectModel.DBConnection.WttTask.RevertStatistics(ITaskResultFilterHistory filterHistory)
       at Microsoft.Windows.Kits.Hardware.FilterEngine.DatabaseFilterEngine.RevertExpiredFilters(Task taskResult, List`1 expiredFilterInfo)
       at Microsoft.Windows.Kits.Hardware.FilterEngine.DatabaseFilterEngine.RevertExpiredFiltersToChildTasks(Task taskResult, Dictionary`2 expiredFilterCache)
       at Microsoft.Windows.Kits.Hardware.FilterEngine.DatabaseFilterEngine.RevertExpiredFilters(Project project)
       at Microsoft.Windows.Kits.Hardware.FilterEngine.BaseFilterEngine.Filter(Project project)
       at Microsoft.Windows.Kits.Hardware.UI.Views.Results.UpdateFiltersLink_Click(Object sender, RoutedEventArgs e)
       at System.Windows.Input.CommandBinding.OnExecuted(Object sender, ExecutedRoutedEventArgs e)
       at System.Windows.Input.CommandManager.ExecuteCommandBinding(Object sender, ExecutedRoutedEventArgs e, CommandBinding commandBinding)
       at System.Windows.Input.CommandManager.FindCommandBinding(CommandBindingCollection commandBindings, Object sender, RoutedEventArgs e, ICommand command, Boolean execute)
       at System.Windows.Input.CommandManager.FindCommandBinding(Object sender, RoutedEventArgs e, ICommand command, Boolean execute)
       at System.Windows.Input.CommandManager.OnExecuted(Object sender, ExecutedRoutedEventArgs e)
       at System.Windows.UIElement.OnExecutedThunk(Object sender, ExecutedRoutedEventArgs e)
       at System.Windows.Input.ExecutedRoutedEventArgs.InvokeEventHandler(Delegate genericHandler, Object target)
       at System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
       at System.Windows.RoutedEventHandlerInfo.InvokeHandler(Object target, RoutedEventArgs routedEventArgs)
       at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
       at System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
       at System.Windows.UIElement.RaiseEvent(RoutedEventArgs args, Boolean trusted)
       at System.Windows.Input.RoutedCommand.ExecuteImpl(Object parameter, IInputElement target, Boolean userInitiated)
       at System.Windows.Input.RoutedCommand.ExecuteCore(Object parameter, IInputElement target, Boolean userInitiated)
       at MS.Internal.Commands.CommandHelpers.CriticalExecuteCommandSource(ICommandSource commandSource, Boolean userInitiated)
       at System.Windows.Controls.Primitives.ButtonBase.OnClick()
       at System.Windows.Controls.Button.OnClick()
       at System.Windows.Controls.Primitives.ButtonBase.OnMouseLeftButtonUp(MouseButtonEventArgs e)
       at System.Windows.UIElement.OnMouseLeftButtonUpThunk(Object sender, MouseButtonEventArgs e)
       at System.Windows.Input.MouseButtonEventArgs.InvokeEventHandler(Delegate genericHandler, Object genericTarget)
       at System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
       at System.Windows.RoutedEventHandlerInfo.InvokeHandler(Object target, RoutedEventArgs routedEventArgs)
       at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
       at System.Windows.UIElement.ReRaiseEventAs(DependencyObject sender, RoutedEventArgs args, RoutedEvent newEvent)
       at System.Windows.UIElement.OnMouseUpThunk(Object sender, MouseButtonEventArgs e)
       at System.Windows.Input.MouseButtonEventArgs.InvokeEventHandler(Delegate genericHandler, Object genericTarget)
       at System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
       at System.Windows.RoutedEventHandlerInfo.InvokeHandler(Object target, RoutedEventArgs routedEventArgs)
       at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
       at System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
       at System.Windows.UIElement.RaiseTrustedEvent(RoutedEventArgs args)
       at System.Windows.UIElement.RaiseEvent(RoutedEventArgs args, Boolean trusted)
       at System.Windows.Input.InputManager.ProcessStagingArea()
       at System.Windows.Input.InputManager.ProcessInput(InputEventArgs input)
       at System.Windows.Input.InputProviderSite.ReportInput(InputReport inputReport)
       at System.Windows.Interop.HwndMouseInputProvider.ReportInput(IntPtr hwnd, InputMode mode, Int32 timestamp, RawMouseActions actions, Int32 x, Int32 y, Int32 wheel)
       at System.Windows.Interop.HwndMouseInputProvider.FilterMessage(IntPtr hwnd, WindowMessage msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
       at System.Windows.Interop.HwndSource.InputFilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
       at MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
       at MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o)
       at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs)
       at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(Object source, Delegate method, Object args, Int32 numArgs, Delegate catchHandler)
    System Information:
    Available Virtual Memory: 3,109.00 MB
    Available Physical Memory: 2,393.00 MB
    Available Space on drive C:\: 189,390.00 MB
    Available Space on drive C:\: 189,390.00 MB

    Hi,
    Can you find the "updatefilters" in your HCK control PC?  Some file maybe lost.
    Thanks, Steve

  • How to read success/failure message while running sqlldr through php?

    Hi All,
    currently i am running sqlldr through PHP . i want to read both success and failure message from sqlldr.
    sometimes it fails to load data, but it shows record inserted
    is there ant way to figure it out succ or failure?

    With SQL Loader you can get errors at several levels.
    At the command line level by reading $? after it runs since it sets $ERROR_LEVEL correctly.
    It also creates many types of log files which can then be parsed that include but are not limited to:
    The [control file name].log and the [control file name].bad file which are created wherever you would like them to be created and named any way you would like them. The [control file name].bad file contains all records that were considered unacceptable by SQLLDR and therefor simply testing for that files existence will start you down the road to programatically dealing with errors.
    Yes I know the documentation for SQLLDR is worse then stereo instructions that started out in Japanese, then were translated to Greek then to Korean then finally into English but there are some pretty good examples out there.

Maybe you are looking for

  • Image Processing in Java (E-Book) Request

    Can anyone post the links for this e-book i think this e-book is helpful.so,iam requesting all of you. Image Processing in Java by Douglas A. Lyon Publisher: Prentice Hall PTR; Bk&CD-Rom edition (March 1, 1999) Language: English ISBN: 0139745777

  • RD Gateway 2012 R2 (DMZ) - Problem with authentification (NULL SID)

    Hello, I have a problem with a RD Gateway 2012 R2, that domain users can't log on over the RD Gateway to the RD Sessionhost. I get an error message in the eventlog on the RD Gateway. Protokollname: Security Quelle: Microsoft-Windows-Security-Auditing

  • GST allocation to cost centers

    hi all,    in an invoice the GST from all line items will go to a single cost center, but my client wants to automatically distribute it to their respective cost centers entered in the line items with out manual entry ex: Itm PK ACC        Tx  Amt  

  • ISE integration with SMS gateway required license

    Hello All, We have cisco WLC with guest wireless access configured to use local database. the managment requires new solution to send cridintials to user throug SMS after the user signup through portal. we decided to use the cisco ISE. my question is

  • Applet problem in JSP

    Hi, I display an Applet from a jsp with this code :           <jsp:plugin type="applet" code="client/ui/ClientApplet.class"                archive="Client.jar" name="LeHall"                height="100%" width="100%"> It works perfectly in Internet Ex