Reading a text data file into memory
hi,
I have a text file which contains data, The text file is parsed and objects are created. The problem is the text file is quite huge measuring upto 1.8~2 Mb. The format of the text file is as follows
Units: METRIC (atm, m3)
* Step: 1 Time: 0.00
* Average Field Pressure : 204.14
* Region 1 Pressure : 204.14
Well GROUP Layer Blk_Pressure BHP ResRate OilRate WaterRate GasRate KhProd Windex PindeWELLTYPE
1 FIELD 1 204.14 49.33 6601.22 6568.10 37.14 538.07 99999.00 260.35 99999.00 P
1 FIELD 2 204.14 50.34 6558.13 6525.23 36.90 534.56 99999.00 260.35 99999.00 P
1 FIELD 3 204.14 51.35 6515.04 6482.36 36.65 531.04 99999.00 260.35 99999.00 P
1 FIELD Tot 204.14 50.34 19674.40 19575.69 110.69 1603.67 99999.00 99999.00 99999.00 P
2 FIELD 1 204.14 377.66 7573.96 0.00 7403.68 0.00 99999.00 260.35 99999.00 I
2 FIELD 2 204.14 378.40 7606.33 0.00 7435.32 0.00 99999.00 260.35 99999.00 I
2 FIELD 3 204.14 379.14 7638.70 0.00 7466.96 0.00 99999.00 260.35 99999.00 I
2 FIELD Tot 204.14 378.40 22818.99 0.00 22305.95 0.00 99999.00 99999.00 99999.00 I
* Step: 2 Time: 20.23
* Average Field Pressure : 300.11
* Region 1 Pressure : 300.11
Well GROUP Layer Blk_Pressure BHP ResRate OilRate WaterRate GasRate KhProd Windex PindeWELLTYPE
1 FIELD 1 194.20 49.33 858.83 853.40 5.36 68.22 99999.00 260.35 99999.00 P
1 FIELD 2 194.48 50.34 871.71 866.22 5.42 69.35 99999.00 260.35 99999.00 P
1 FIELD 3 194.76 51.35 884.86 879.29 5.48 70.49 99999.00 260.35 99999.00 P
1 FIELD Tot 194.48 50.34 2615.40 2598.91 16.26 208.06 99999.00 99999.00 99999.00 P
2 FIELD 1 370.40 377.66 912.25 0.00 891.74 0.00 99999.00 260.35 99999.00 I
2 FIELD 2 371.26 378.40 895.75 0.00 875.61 0.00 99999.00 260.35 99999.00 I
2 FIELD 3 372.12 379.14 879.29 0.00 859.52 0.00 99999.00 260.35 99999.00 I
2 FIELD Tot 371.26 378.40 2687.28 0.00 2626.86 0.00 99999.00 99999.00 99999.00 I
The Step goes on till like 3000, I am creating an object for each step which inturn has nested object for each well and the well in turn for each layer. In the above case of step 3 the object would be
class Step 2{
inner class well
{ //for well 1
inner class layer { // for layer 1 }
inner class layer {/ for layer 2 }
inner class layer {/ for layer 3 }
inner class well
{ //for well 2
inner class layer { // for layer 1 }
inner class layer {/ for layer 2 }
inner class layer {/ for layer 3 }
This architecture of mine is proving to be heavy as I would end up with around 9000 Java objects in memory, though my classes only have have int, float, String data items. I am using this data to plot graphs, so I guess it wouldnt be optimal to read data from text file for each plot.
So in short the problem is can anyone tell a better way to read the data into memory ? given that there could be 3000 steps in the format given above.
Thanks
AM
I have implemented and it takes around 30-45 sec to parse and also the GUI has become very slow. I query the objects for multiple combinations of graphs.
The data from the objects is being used to feed the graphs on my GUI. I have a number of options on my GUI for different kinds of graphs, for each combination chosen the Objects are queried for the data. The GUI is written using Swing.
So is there anyway I can fine tune the application, any tips about the object architecture or how to improve the speed. I am also explicitly running the garbage collector a few times in my program. Also how can I make JVM occupy lesser memory so that my program can have more memory.
Thanks
am
Similar Messages
-
Reading entire txt file into memory?
When you are using BufferedReader to read info into a buffer, that means you are reading the file into memory, correct? (Is that what buffer means?)
I want to look for pattern matches in text files (about 1000 of them) using the regex utils. But I don't want to read and examine the text files line by line. I want to read in the entire text file into memory first and then look for the pattern matches. The text files generally don't exceed about 15K in size. I'm only going one file at a time, too, so this won't give me any out of memory errors, will it?
And more importantly, how do I do it? I mean the "reading in the file" part only. I have my RegEx, I have my array of files to examine already. I just can't figure out the right code to use to read each file into memory before I look for pattern matches.
Could someone help, please?When you are using BufferedReader to read info into a
buffer, that means you are reading the file into
memory, correct? (Is that what buffer means?)Yes.
I want to look for pattern matches in text files
(about 1000 of them) using the regex utils. But I
don't want to read and examine the text files line by
line.Why not?
I want to read in the entire text file into
memory first and then look for the pattern matches.Why?
The text files generally don't exceed about 15K in
size. I'm only going one file at a time, too, so
this won't give me any out of memory errors, will
it?Depends on how much memory you've given the VM and how much of that it's using already at the time you read the files, but in general, probably not a problem.
And more importantly, how do I do it? I mean the
"reading in the file" part only.Use BufferedReader to read line by line and then append each line (plus a newline, since BR.readLine() strips those off) to a StringBuilder.
Or use a BufferedInputStream and and array that's as big as the file, and in a loop, try to read as much as is left into that array at an offset equal to how much has been read so far.
I still think this is probably not a good approach though. -
Load an existing Berkeley DB file into memory
Dear Experts,
I have created some Berkeley DB (BDB) files onto disk.
I noticed that when I issue key-value retrievals, the page faults are substantial, and the CPU utilization is low.
One sample of the time command line output is as follow:
1.36user 1.45system 0:10.83elapsed 26%CPU (0avgtext+0avgdata 723504maxresident)k
108224inputs+528outputs (581major+76329minor)pagefaults 0swaps
I suspect that the bottleneck is the high frequency of file I/O.
This may be because of page faults of the BDB file, and the pages are loaded in/out of disk fairly frequently.
I wish to explore how to reduce this page fault, and hence expedite the retrieval time.
One way I have read is to load the entire BDB file into main memory.
There are some example programs on docs.oracle.com, under the heading "Writing In-Memory Berkeley DB Applications".
However, I could not get them to work.
I enclosed below my code:
--------------- start of code snippets ---------------
/* Initialize our handles */
DB *dbp = NULL;
DB_ENV *envp = NULL;
DB_MPOOLFILE *mpf = NULL;
const char *db_name = "db.id_url"; // A BDB file on disk, size 66,813,952
u_int32_t open_flags;
/* Create the environment */
db_env_create(&envp, 0);
open_flags =
DB_CREATE | /* Create the environment if it does not exist */
DB_INIT_LOCK | /* Initialize the locking subsystem */
DB_INIT_LOG | /* Initialize the logging subsystem */
DB_INIT_MPOOL | /* Initialize the memory pool (in-memory cache) */
DB_INIT_TXN |
DB_PRIVATE; /* Region files are not backed by the filesystem.
* Instead, they are backed by heap memory. */
* Specify the size of the in-memory cache.
envp->set_cachesize(envp, 0, 70 * 1024 * 1024, 1); // 70 Mbytes, more than the BDB file size of 66,813,952
* Now actually open the environment. Notice that the environment home
* directory is NULL. This is required for an in-memory only application.
envp->open(envp, NULL, open_flags, 0);
/* Open the MPOOL file in the environment. */
envp->memp_fcreate(envp, &mpf, 0);
int pagesize = 4096;
if ((ret = mpf->open(mpf, "db.id_url", 0, 0, pagesize)) != 0) {
envp->err(envp, ret, "DB_MPOOLFILE->open: ");
goto err;
int cnt, hits = 66813952/pagesize;
void *p=0;
for (cnt = 0; cnt < hits; ++cnt) {
db_pgno_t pageno = cnt;
mpf->get(mpf, &pageno, NULL, 0, &p);
fprintf(stderr,"\n\nretrieve %5d pages\n",cnt);
/* Initialize the DB handle */
db_create(&dbp, envp, 0);
* Set the database open flags. Autocommit is used because we are
* transactional.
open_flags = DB_CREATE | DB_AUTO_COMMIT;
dbp->open(dbp, // Pointer to the database
NULL, // Txn pointer
NULL, // File name -- NULL for inmemory
db_name, // Logical db name
DB_BTREE, // Database type (using btree)
open_flags, // Open flags
0); // File mode. defaults is 0
DBT key,data; int test_key=103456;
memset(&key, 0, sizeof(key));
memset(&data, 0, sizeof(data));
key.data = (int*)&test_key;
key.size = sizeof(test_key);
dbp->get(dbp, NULL, &key, &data, 0);
printf("%d --> %s ", *((int*)key.data),(char*)data.data );
/* Close our database handle, if it was opened. */
if (dbp != NULL) {
dbp->close(dbp, 0);
if (mpf != NULL) (void)mpf->close(mpf, 0);
/* Close our environment, if it was opened. */
if (envp != NULL) {
envp->close(envp, 0);
/* Final status message and return. */
printf("I'm all done.\n");
--------------- end of code snippets ---------------
After compilation, the code output is:
retrieve 16312 pages
103456 --> (null) I'm all done.
However, the test_key input did not get the correct value retrieval.
I have been reading and trying this for the past 3 days.
I will appreciate any help/tips.
Thank you for your kind attention.
WAN
SingaporeHi Mike
Thank you for your 3 steps:
-- create the database
-- load the database
-- run you retrievals
Recall that my original intention is to load in an existing BDB file (70Mbytes) completely into memory.
So following your 3 steps above, this is what I did:
Step-1 (create the database)
I have followed the oracle article on http://docs.oracle.com/cd/E17076_02/html/articles/inmemory/C/index.html
In this step, I have created the environment, set the cachesize to be bigger than the BDB file.
However, I have some problem with the code that opens the DB handle.
The code on the oracle page is as follow:
* Open the database. Note that the file name is NULL.
* This forces the database to be stored in the cache only.
* Also note that the database has a name, even though its
* file name is NULL.
ret = dbp->open(dbp, /* Pointer to the database */
NULL, /* Txn pointer */
NULL, /* File name is not specified on purpose */
db_name, /* Logical db name. */
DB_BTREE, /* Database type (using btree) */
db_flags, /* Open flags */
0); /* File mode. Using defaults */
Note that the open(..) API does not include the BDB file name.
The documentation says that this is so that the API will know that it needs an in-memory database.
However, how do I tell the API the source of the existing BDB file from which I wish to load entirely into memory ?
Do I need to create another DB handle (non-in-memory, with a file name as argument) that reads from this BDB file, and then call DB->put(.) that inserts the records into the in-memory DB ?
Step-2 (load the database)
My question in this step-2 is the same as my last question in step-1, on how do I tell the API to load in my existing BDB file into memory?
That is, should I create another DB handle (non-in-memory) that reads from the existing BDB file, use a cursor to read in EVERY key-value pair, and then insert into the in-memory DB?
Am I correct to say that by using the cursor to read in EVERY key-value pair, I am effectively warming the file cache, so that the BDB retrieval performance can be maximized ?
Step-3 (run your retrievals)
Are the retrieval API, e.g. c_get(..), get(..), for the in-memory DB, the same as the file-based DB ?
Thank you and always appreciative for your tips.
WAN
Singapore -
Problem with ArrayLists and writing and reading from a .dat file (I think)
I'm brand new to this forum, but I'm sure hoping someone can help me with a problem I'm having with ArrayLists. This program was originally created with an array of objects that were displayed on a GUI with jtextFields, then cycling thru them via jButtons: First, Next, Previous, Last. Now I need to add the ability to modify, delete and add records. Both iterations of this program needed to write to and read from a .dat file.
It worked just like it was suppose to when I used just the array, but now I need to use a "dynamic array" that will grow or shrink as needed: i.e. an ArrayList.
When I aded the ArrayList I had the ArrayList use toArray() to fill my original array so I could continue to use all the methods I'd created for using with my array. Now I'm getting a nullPointerException every time I try to run my program, which means somewhere I'm NOT filling my array ???? But, I'm writing just fine to my .dat file, which is confusing me to no end!
It's a long program, and I apologize for the length, but here it is. There are also 2 class files, a parent and 1 child below Inventory6. This was written in NetBeans IDE 5.5.1.
Thank you in advance for any help anyone can give me!
LabyBC
package my.Inventory6;
import java.awt.Container;
import java.awt.Dimension;
import java.awt.GridBagConstraints;
import java.awt.GridBagLayout;
import java.awt.Insets;
import java.awt.Toolkit;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.text.DecimalFormat;
import javax.swing.JOptionPane;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.JTextField;
import java.io.*;
import java.io.File;
import java.io.FileInputStream;
import java.io.FileNotFoundException;
import java.lang.IllegalStateException;
import java.util.NoSuchElementException;
import java.util.ArrayList;
import java.text.NumberFormat;
// Class Inventory6
public class Inventory6 extends javax.swing.JFrame {
private static InventoryPlusColor[] inventory;
private static ArrayList inList;
// create a tool that insure the specified format for a double number, when displayed
private DecimalFormat doubleFormat = new DecimalFormat( "0.00" );
private DecimalFormat singleFormat = new DecimalFormat( "0");
// the index within the array of products of the current displayed product
private int currentProductIndex;
/** Creates new form Inventory6 */
public Inventory6() {
initComponents();
currentProductIndex = 0;
} // end Inventory6()
private static InventoryPlusColor[] getInventory() {
ArrayList<InventoryPlusColor> inList = new ArrayList<InventoryPlusColor>();
inList.add(new InventoryPlusColor(1, "Couch", 3, 1250.00, "Blue"));
inList.add(new InventoryPlusColor(2, "Recliner", 10, 525.00, "Green"));
inList.add(new InventoryPlusColor(3, "Chair", 6, 125.00, "Mahogany"));
inList.add(new InventoryPlusColor(4, "Pedestal Table", 2, 4598.00, "Oak"));
inList.add(new InventoryPlusColor(5, "Sleeper Sofa", 4, 850.00, "Yellow"));
inList.add(new InventoryPlusColor(6, "Rocking Chair", 2, 459.00, "Tweed"));
inList.add(new InventoryPlusColor(7, "Couch", 4, 990.00, "Red"));
inList.add(new InventoryPlusColor(8, "Chair", 12, 54.00, "Pine"));
inList.add(new InventoryPlusColor(9, "Ottoman", 3, 110.00, "Black"));
inList.add(new InventoryPlusColor(10, "Chest of Drawers", 5, 598.00, "White"));
for (int j = 0; j < inList.size(); j++)
System.out.println(inList);
InventoryPlusColor[] inventory = (InventoryPlusColor[]) inList.toArray
(new InventoryPlusColor[inList.size()]);
return inventory;
} // end getInventory() method
/** This method is called from within the constructor to
* initialize the form.
* WARNING: Do NOT modify this code. The content of this method is
* always regenerated by the Form Editor.
// <editor-fold defaultstate="collapsed" desc=" Generated Code ">
private void initComponents() {
jPanel1 = new javax.swing.JPanel();
IDNumberLbl = new javax.swing.JLabel();
IDNumberField = new javax.swing.JTextField();
prodNameLbl = new javax.swing.JLabel();
prodNameField = new javax.swing.JTextField();
colorLbl = new javax.swing.JLabel();
colorField = new javax.swing.JTextField();
unitsInStockLbl = new javax.swing.JLabel();
unitsInStockField = new javax.swing.JTextField();
unitPriceLbl = new javax.swing.JLabel();
unitPriceField = new javax.swing.JTextField();
invenValueLbl = new javax.swing.JLabel();
invenValueField = new javax.swing.JTextField();
restockingFeeLbl = new javax.swing.JLabel();
restockingFeeField = new javax.swing.JTextField();
jbtFirst = new javax.swing.JButton();
jbtNext = new javax.swing.JButton();
jbtPrevious = new javax.swing.JButton();
jbtLast = new javax.swing.JButton();
jbtAdd = new javax.swing.JButton();
jbtDelete = new javax.swing.JButton();
jbtModify = new javax.swing.JButton();
jbtSave = new javax.swing.JButton();
jPanel2 = new javax.swing.JPanel();
searchIDNumLbl = new javax.swing.JLabel();
searchIDNumbField = new javax.swing.JTextField();
jbtSearch = new javax.swing.JButton();
searchResults = new javax.swing.JLabel();
jbtExit = new javax.swing.JButton();
jbtExitwoSave = new javax.swing.JButton();
setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE);
jPanel1.setBorder(javax.swing.BorderFactory.createTitledBorder(javax.swing.BorderFactory.createEtchedBorder(), "Inventory Program"));
IDNumberLbl.setText("ID Number");
IDNumberField.setEditable(false);
prodNameLbl.setText("Product Name");
prodNameField.setEditable(false);
colorLbl.setText("Product Color");
colorField.setEditable(false);
colorField.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
colorFieldActionPerformed(evt);
unitsInStockLbl.setText("Units In Stock");
unitsInStockField.setEditable(false);
unitPriceLbl.setText("Unit Price $");
unitPriceField.setEditable(false);
invenValueLbl.setText("Inventory Value $");
invenValueField.setEditable(false);
restockingFeeLbl.setText("5% Restocking Fee $");
restockingFeeField.setEditable(false);
javax.swing.GroupLayout jPanel1Layout = new javax.swing.GroupLayout(jPanel1);
jPanel1.setLayout(jPanel1Layout);
jPanel1Layout.setHorizontalGroup(
jPanel1Layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING)
.addGroup(jPanel1Layout.createSequentialGroup()
.addContainerGap()
.addGroup(jPanel1Layout.createParallelGroup(javax.swing.GroupLayout.Alignment.TRAILING)
.addComponent(unitPriceLbl)
.addComponent(unitsInStockLbl)
.addComponent(colorLbl)
.addComponent(prodNameLbl)
.addComponent(IDNumberLbl)
.addComponent(restockingFeeLbl)
.addComponent(invenValueLbl))
.addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.RELATED)
.addGroup(jPanel1Layout.createParallelGroup(javax.swing.GroupLayout.Alignment.TRAILING)
.addComponent(IDNumberField, javax.swing.GroupLayout.Alignment.LEADING, javax.swing.GroupLayout.DEFAULT_SIZE, 176, Short.MAX_VALUE)
.addComponent(prodNameField, javax.swing.GroupLayout.Alignment.LEADING, javax.swing.GroupLayout.DEFAULT_SIZE, 176, Short.MAX_VALUE)
.addComponent(colorField, javax.swing.GroupLayout.Alignment.LEADING, javax.swing.GroupLayout.DEFAULT_SIZE, 176, Short.MAX_VALUE)
.addComponent(unitsInStockField, javax.swing.GroupLayout.Alignment.LEADING, javax.swing.GroupLayout.DEFAULT_SIZE, 176, Short.MAX_VALUE)
.addComponent(unitPriceField, javax.swing.GroupLayout.Alignment.LEADING, javax.swing.GroupLayout.DEFAULT_SIZE, 176, Short.MAX_VALUE)
.addComponent(restockingFeeField, javax.swing.GroupLayout.Alignment.LEADING, javax.swing.GroupLayout.DEFAULT_SIZE, 176, Short.MAX_VALUE)
.addComponent(invenValueField, javax.swing.GroupLayout.DEFAULT_SIZE, 176, Short.MAX_VALUE))
.addContainerGap())
jPanel1Layout.setVerticalGroup(
jPanel1Layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING)
.addGroup(jPanel1Layout.createSequentialGroup()
.addContainerGap()
.addGroup(jPanel1Layout.createParallelGroup(javax.swing.GroupLayout.Alignment.BASELINE)
.addComponent(IDNumberLbl)
.addComponent(IDNumberField, javax.swing.GroupLayout.PREFERRED_SIZE, javax.swing.GroupLayout.DEFAULT_SIZE, javax.swing.GroupLayout.PREFERRED_SIZE))
.addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.RELATED)
.addGroup(jPanel1Layout.createParallelGroup(javax.swing.GroupLayout.Alignment.BASELINE)
.addComponent(prodNameLbl)
.addComponent(prodNameField, javax.swing.GroupLayout.PREFERRED_SIZE, javax.swing.GroupLayout.DEFAULT_SIZE, javax.swing.GroupLayout.PREFERRED_SIZE))
.addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.RELATED)
.addGroup(jPanel1Layout.createParallelGroup(javax.swing.GroupLayout.Alignment.BASELINE)
.addComponent(colorField, javax.swing.GroupLayout.PREFERRED_SIZE, javax.swing.GroupLayout.DEFAULT_SIZE, javax.swing.GroupLayout.PREFERRED_SIZE)
.addComponent(colorLbl))
.addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.RELATED)
.addGroup(jPanel1Layout.createParallelGroup(javax.swing.GroupLayout.Alignment.BASELINE)
.addComponent(unitsInStockField, javax.swing.GroupLayout.PREFERRED_SIZE, javax.swing.GroupLayout.DEFAULT_SIZE, javax.swing.GroupLayout.PREFERRED_SIZE)
.addComponent(unitsInStockLbl))
.addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.RELATED)
.addGroup(jPanel1Layout.createParallelGroup(javax.swing.GroupLayout.Alignment.BASELINE)
.addComponent(unitPriceField, javax.swing.GroupLayout.PREFERRED_SIZE, javax.swing.GroupLayout.DEFAULT_SIZE, javax.swing.GroupLayout.PREFERRED_SIZE)
.addComponent(unitPriceLbl))
.addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.RELATED)
.addGroup(jPanel1Layout.createParallelGroup(javax.swing.GroupLayout.Alignment.BASELINE)
.addComponent(restockingFeeField, javax.swing.GroupLayout.PREFERRED_SIZE, javax.swing.GroupLayout.DEFAULT_SIZE, javax.swing.GroupLayout.PREFERRED_SIZE)
.addComponent(restockingFeeLbl))
.addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.RELATED, 10, Short.MAX_VALUE)
.addGroup(jPanel1Layout.createParallelGroup(javax.swing.GroupLayout.Alignment.BASELINE)
.addComponent(invenValueField, javax.swing.GroupLayout.PREFERRED_SIZE, javax.swing.GroupLayout.DEFAULT_SIZE, javax.swing.GroupLayout.PREFERRED_SIZE)
.addComponent(invenValueLbl))
.addContainerGap())
jbtFirst.setText("First");
jbtFirst.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
jbtFirstActionPerformed(evt);
jbtNext.setText("Next");
jbtNext.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
jbtNextActionPerformed(evt);
jbtPrevious.setText("Previous");
jbtPrevious.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
jbtPreviousActionPerformed(evt);
jbtLast.setText("Last");
jbtLast.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
jbtLastActionPerformed(evt);
jbtAdd.setText("Add");
jbtAdd.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
jbtAddActionPerformed(evt);
jbtDelete.setText("Delete");
jbtModify.setText("Modify");
jbtModify.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
jbtModifyActionPerformed(evt);
jbtSave.setText("Save");
jbtSave.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
jbtSaveActionPerformed(evt);
jPanel2.setBorder(javax.swing.BorderFactory.createTitledBorder(javax.swing.BorderFactory.createEtchedBorder(), "Search by:"));
searchIDNumLbl.setText("Item Number:");
jbtSearch.setText("Search");
searchResults.setFont(new java.awt.Font("Tahoma", 1, 12));
javax.swing.GroupLayout jPanel2Layout = new javax.swing.GroupLayout(jPanel2);
jPanel2.setLayout(jPanel2Layout);
jPanel2Layout.setHorizontalGroup(
jPanel2Layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING)
.addGroup(jPanel2Layout.createSequentialGroup()
.addContainerGap()
.addComponent(searchIDNumLbl)
.addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.RELATED)
.addGroup(jPanel2Layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING)
.addGroup(jPanel2Layout.createSequentialGroup()
.addGap(259, 259, 259)
.addComponent(searchResults, javax.swing.GroupLayout.PREFERRED_SIZE, 213, javax.swing.GroupLayout.PREFERRED_SIZE))
.addGroup(jPanel2Layout.createParallelGroup(javax.swing.GroupLayout.Alignment.TRAILING)
.addComponent(jbtSearch, javax.swing.GroupLayout.PREFERRED_SIZE, 83, javax.swing.GroupLayout.PREFERRED_SIZE)
.addComponent(searchIDNumbField, javax.swing.GroupLayout.PREFERRED_SIZE, 143, javax.swing.GroupLayout.PREFERRED_SIZE)))
.addContainerGap(javax.swing.GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE))
jPanel2Layout.setVerticalGroup(
jPanel2Layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING)
.addGroup(jPanel2Layout.createSequentialGroup()
.addGroup(jPanel2Layout.createParallelGroup(javax.swing.GroupLayout.Alignment.BASELINE)
.addComponent(searchIDNumLbl)
.addComponent(searchIDNumbField, javax.swing.GroupLayout.PREFERRED_SIZE, javax.swing.GroupLayout.DEFAULT_SIZE, javax.swing.GroupLayout.PREFERRED_SIZE))
.addGroup(jPanel2Layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING)
.addGroup(jPanel2Layout.createSequentialGroup()
.addGap(32, 32, 32)
.addComponent(searchResults, javax.swing.GroupLayout.PREFERRED_SIZE, 17, javax.swing.GroupLayout.PREFERRED_SIZE))
.addGroup(jPanel2Layout.createSequentialGroup()
.addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.RELATED)
.addComponent(jbtSearch)))
.addContainerGap(javax.swing.GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE))
jbtExit.setText("Save and Exit");
jbtExit.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
jbtExitActionPerformed(evt);
jbtExitwoSave.setText("Exit");
jbtExitwoSave.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
jbtExitwoSaveActionPerformed(evt);
javax.swing.GroupLayout layout = new javax.swing.GroupLayout(getContentPane());
getContentPane().setLayout(layout);
layout.setHorizontalGroup(
layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING)
.addGroup(layout.createSequentialGroup()
.addContainerGap()
.addGroup(layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING)
.addGroup(layout.createSequentialGroup()
.addComponent(jPanel2, javax.swing.GroupLayout.PREFERRED_SIZE, 248, javax.swing.GroupLayout.PREFERRED_SIZE)
.addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.RELATED, 44, Short.MAX_VALUE)
.addGroup(layout.createParallelGroup(javax.swing.GroupLayout.Alignment.TRAILING, false)
.addComponent(jbtExitwoSave, javax.swing.GroupLayout.DEFAULT_SIZE, javax.swing.GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE)
.addComponent(jbtExit)))
.addGroup(layout.createSequentialGroup()
.addComponent(jbtFirst)
.addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.RELATED)
.addComponent(jbtNext)
.addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.RELATED)
.addComponent(jbtPrevious)
.addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.RELATED)
.addComponent(jbtLast))
.addGroup(layout.createSequentialGroup()
.addComponent(jPanel1, javax.swing.GroupLayout.DEFAULT_SIZE, javax.swing.GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE)
.addGap(12, 12, 12)
.addGroup(layout.createParallelGroup(javax.swing.GroupLayout.Alignment.TRAILING)
.addComponent(jbtAdd)
.addComponent(jbtDelete)
.addComponent(jbtModify)
.addComponent(jbtSave))))
.addContainerGap())
layout.linkSize(javax.swing.SwingConstants.HORIZONTAL, new java.awt.Component[] {jbtFirst, jbtLast, jbtNext, jbtPrevious});
layout.linkSize(javax.swing.SwingConstants.HORIZONTAL, new java.awt.Component[] {jbtAdd, jbtDelete, jbtModify, jbtSave});
layout.setVerticalGroup(
layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING)
.addGroup(layout.createSequentialGroup()
.addGroup(layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING)
.addGroup(layout.createSequentialGroup()
.addGap(21, 21, 21)
.addComponent(jbtAdd)
.addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.RELATED)
.addComponent(jbtDelete)
.addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.RELATED)
.addComponent(jbtModify)
.addGap(39, 39, 39)
.addComponent(jbtSave))
.addGroup(layout.createSequentialGroup()
.addContainerGap()
.addComponent(jPanel1, javax.swing.GroupLayout.PREFERRED_SIZE, javax.swing.GroupLayout.DEFAULT_SIZE, javax.swing.GroupLayout.PREFERRED_SIZE)))
.addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.RELATED)
.addGroup(layout.createParallelGroup(javax.swing.GroupLayout.Alignment.BASELINE)
.addComponent(jbtFirst)
.addComponent(jbtNext)
.addComponent(jbtPrevious)
.addComponent(jbtLast))
.addGap(15, 15, 15)
.addGroup(layout.createParallelGroup(javax.swing.GroupLayout.Alignment.TRAILING)
.addComponent(jPanel2, javax.swing.GroupLayout.PREFERRED_SIZE, 80, javax.swing.GroupLayout.PREFERRED_SIZE)
.addGroup(layout.createSequentialGroup()
.addComponent(jbtExit)
.addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.RELATED)
.addComponent(jbtExitwoSave)))
.addContainerGap())
pack();
}// </editor-fold>
private void jbtExitwoSaveActionPerformed(java.awt.event.ActionEvent evt) {
System.exit(0);
private void jbtSaveActionPerformed(java.awt.event.ActionEvent evt) {
String prodNameMod, colorMod;
double unitsInStockMod, unitPriceMod;
int idNumMod;
idNumMod = Integer.parseInt(IDNumberField.getText());
prodNameMod = prodNameField.getText();
unitsInStockMod = Double.parseDouble(unitsInStockField.getText());
unitPriceMod = Double.parseDouble(unitPriceField.getText());
colorMod = colorField.getText();
if(currentProductIndex == inventory.length) {
inList.add(new InventoryPlusColor(idNumMod, prodNameMod,
unitsInStockMod, unitPriceMod, colorMod));
InventoryPlusColor[] inventory = (InventoryPlusColor[]) inList.toArray
(new InventoryPlusColor[inList.size()]);
} else {
inventory[currentProductIndex].setIDNumber(idNumMod);
inventory[currentProductIndex].setProdName(prodNameMod);
inventory[currentProductIndex].setUnitsInStock(unitsInStockMod);
inventory[currentProductIndex].setUnitPrice(unitPriceMod);
inventory[currentProductIndex].setColor(colorMod);
displayProduct(inventory[currentProductIndex]);
private static void writeInventory(InventoryPlusColor i,
DataOutputStream out) {
try {
out.writeInt(i.getIDNumber());
out.writeUTF(i.getProdName());
out.writeDouble(i.getUnitsInStock());
out.writeDouble(i.getUnitPrice());
out.writeUTF(i.getColor());
} catch (IOException e) {
JOptionPane.showMessageDialog(null, "I/O Exception writing data",
"", JOptionPane.ERROR_MESSAGE);
System.exit(0);
} //end writeInventory()
private static DataOutputStream openOutputStream(String name) {
DataOutputStream out = null;
try {
File file = new File(name);
out =
new DataOutputStream(
new BufferedOutputStream(
new FileOutputStream(file)));
} catch (IOException e) {
JOptionPane.showMessageDialog(null, "I/O Error", "", JOptionPane.ERROR_MESSAGE);
System.exit(0);
return out;
} // end openOutputStream()
private static void closeFile(DataOutputStream out) {
try {
out.close();
} catch (IOException e) {
JOptionPane.showMessageDialog(null, "I/O Exception closing file",
"", JOptionPane.ERROR_MESSAGE);
System.exit(0);
} // end closeFile()
private static DataInputStream getStream(String name) {
DataInputStream in = null;
try {
File file = new File(name);
in = new DataInputStream(
new BufferedInputStream(
new FileInputStream(file)));
} catch (FileNotFoundException e) {
JOptionPane.showMessageDialog(null, "The file doesn't exist",
"", JOptionPane.ERROR_MESSAGE);
System.exit(0);
} catch (IOException e) {
JOptionPane.showMessageDialog(null, "I/O Error creating file",
"", JOptionPane.ERROR_MESSAGE);
System.exit(0);
return in;
private static void closeInputFile(DataInputStream in) {
try {
in.close();
} catch (IOException e) {
JOptionPane.showMessageDialog(null, "I/O Exception closing file",
"", JOptionPane.ERROR_MESSAGE);
System.exit(0);
} // end closeInputFile()
private double entireInventory() {
// a temporary double variable that the method will return ...
// after each product's inventory is added to it
double entireInventory = 0;
// loop to control number of products
for (int index = 0; index < inventory.length; index++) {
// add each inventory to the entire inventory
entireInventory += inventory[index].setInventoryValue();
} // end loop to control number of products
return entireInventory;
} // end method entireInventory
private void jbtLastActionPerformed(java.awt.event.ActionEvent evt) {
currentProductIndex = inventory.length-1; // move to the last product
// display the information for the last product
displayProduct(inventory[currentProductIndex]);
private void jbtPreviousActionPerformed(java.awt.event.ActionEvent evt) {
if (currentProductIndex != 0) // it's not the first product displayed
currentProductIndex -- ; // move to the previous product (decrement the current index)
} else // the first product is displayed
currentProductIndex = inventory.length-1; // move to the last product
// after the current product index is set, display the information for that product
displayProduct(inventory[currentProductIndex]);
private void jbtNextActionPerformed(java.awt.event.ActionEvent evt) {
if (currentProductIndex != inventory.length-1) // it's not the last product displayed
currentProductIndex ++ ; // move to the next product (increment the current index)
} else // the last product is displayed
currentProductIndex = 0; // move to the first product
// after the current product index is set, display the information for that product
displayProduct(inventory[currentProductIndex]);
private void jbtFirstActionPerformed(java.awt.event.ActionEvent evt) {
currentProductIndex = 0;
// display the information for the first product
displayProduct(inventory[currentProductIndex]);
private void colorFieldActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
private void jbtModifyActionPerformed(java.awt.event.ActionEvent evt) {
prodNameField.setEditable(true);
prodNameField.setFocusable(true);
unitsInStockField.setEditable(true);
unitPriceField.setEditable(true);
private void jbtAddActionPerformed(java.awt.event.ActionEvent evt) {
IDNumberField.setText("");
IDNumberField.setEditable(true);
prodNameField.setText("");
prodNameField.setEditable(true);
colorField.setText("");
colorField.setEditable(true);
unitsInStockField.setText("");
unitsInStockField.setEditable(true);
unitPriceField.setText("");
unitPriceField.setEditable(true);
restockingFeeField.setText("");
invenValueField.setText("");
currentProductIndex = inventory.length;
private void jbtExitActionPerformed(java.awt.event.ActionEvent evt) {
DataOutputStream out = openOutputStream("inventory.dat");
for (InventoryPlusColor i : inventory)
writeInventory(i, out);
closeFile(out);
System.exit(0);
private static InventoryPlusColor readProduct(DataInputStream in) {
int idNum = 0;
String prodName = "";
double inStock = 0.0;
double pricBalusC -- The line that gives me my NullPointerException is when I call the "DisplayProduct()" method. Its a dumb question, but with NetBeans how do I find out which reference could be null? I'm not very familiar with how NetBeans works with finding out how to debug. Any help you can give me would be greatly appreciated.The IDE is com-plete-ly irrelevant. It's all about the source code.
Do you understand anyway when and why a NullPointerException is been thrown? It is a subclass of RuntimeException and those kind of exceptions are very trival and generally indicate an design/logic/thinking fault in your code.
SomeObject someObject = null; // The someObject reference is null.
someObject.doSomething(); // Invoking a reference which is null would throw NPE. -
How to load a BDB file into memory?
The entire BDB database needs to reside in memory for performance reasons, it needs to be in memory all the time, not paged in on demand. The physical memory and virtual process address space are large enough to hold this file. How can I load it into memory just before accessing the first entry? I've read the C++ API reference, and it seems that I can do the following:
1, Create a DB environment;
2, Call DB_ENV->set_cachesize() to set a memory pool large enough to hold the BDB file;
3, Call DB_MPOOLFILE->open() to open the BDB file in memory pool of that DB environment;
4, Create a DB handle in that DB environment and open the BDB file (again) via this DB handle.
My questions are:
1, Is there a more elegant way instead of using that DB environment? If the DB environment is a must, then:
2, Does step 3 above load the BDB file into memory pool or just reserve enough space for that file?
Thanks in advance,
FengHello,
Does the documentation on "Memory-only or Flash configurations" at:
http://download.oracle.com/docs/cd/E17076_02/html/programmer_reference/program_ram.html
answer the question?
From there we have:
By default, databases are periodically flushed from the Berkeley DB memory cache to backing physical files in the filesystem. To keep databases from being written to backing physical files, pass the DB_MPOOL_NOFILE flag to the DB_MPOOLFILE->set_flags() method. This flag implies the application's databases must fit entirely in the Berkeley DB cache, of course. To avoid a database file growing to consume the entire cache, applications can limit the size of individual databases in the cache by calling the DB_MPOOLFILE->set_maxsize() method.
Thanks,
Sandra -
Merge Data Files into Spreadsheet not working
HELP! I created the form files in Adobe Acrobat Pro XI, saved as Reader Extended PDF, have a submit button that emails me, and I download them to a folder on my desktop. When I try to "Merge Data Files into Spreadsheet" all I get back is the file name. I've tried with 10 files and only one file and it STILL won't work so it is not that the fields don't line up.
What do I do now?It's hard to say without looking at one of the files. If you can't post one somewhere, I'd be happy to take a look if you're free to email me: acroscript at gmail dot com
-
Split TempDB Data file into multiple files
Hey ,
I have been seeing TempDB contention in memory on our SQL server 2012 Enterprise Edition with SP2 and I need to split TempDB Data file into multiple files .
Could someone please help me to verify the following information:
1]
We are on SQL server 2012 Enterprise Edition with service pack2 but as per SQL Server 2012 Enterprise Edition under CAL Licensing –We are limited to use 20 logical processors instead 40 logical processors. Our SQL is configured
on NUMA nodes and with the limitation SQL uses only 2 NUMA nodes on live .There are 10 logical CPUs are evenly assigned to each NUMA nodes. Microsoft recommends that if SQL server configured on NUMA node and we have 2 NUMA nodes, then we may add two data files
at a time. Please let me know should I add two TempDB data file at a time?
2] We have TempDB Data and log files both on the same Drive of SQL server .When I split TempDB into two Data files, I can get them on the same Drive .What your recommendation should I need to create TempDB Data files on the same drive or on separate
disks?
3] What would be the blackout plan for splitting the tempdb into multiple files? Please let me know if someone has a better back out plan ?
1] Run script that create tempdb Database with a single file
2] Reboot SQL service in order to apply change
Your help will be apprecited .
Thanks ,
DaizyTom , I am seeing TempDB contention on Production server when there is a heavily load on sql server . We also experiencing the overall system slowness.Please look at Pagelatch wait statistics on our server ,Please advise .
wait_type
waiting_tasks_count
wait_time_ms
max_wait_time_ms
signal_wait_time_ms
PAGELATCH_UP
2680948
3609142
10500
508214
PAGELATCH_SH
1142213
1338451
8609
324538
PAGELATCH_NL
0
0
0
0
PAGELATCH_KP
0
0
0
0
PAGELATCH_EX
44852435
7798192
9886
6108374
PAGELATCH_DT
0
0
0
0
Thanks ,
Daizy -
[Multisim]How to import data files into Multisim?
Hi guys,
In Multisim, we can plot various kinds of graphs, which again can be export to data files like *.csv. I have a csv file, which contains data in X and Y axes. How can I import this data file into Multisim, and make it displayed in a graph?
Thanks in advance.Hi,
The Piecewise linear source (PWL) accepts data as voltage or current vs. time. You can find this part by selecting Place>>Component, go to the "Sources" group then select "Signal voltage sources". Place this part on the work area, double-click on it and there should be an option to open a .txt file.
Tien P.
National Instruments -
How to read a text delimited file using 2 dimentional array in java ??
hi,
I am new to java programming.. I have to do a task where in i have to read a text delimeted file in an array.. For example.. If the file is as follows
Name place Value
adi goa 20
shri mumbai 30
riya bangalr 45
I want it to be read in java so as to get an array[row][columns]
This is something i am currently upto, but cant get any further.
import java.io.BufferedReader;
import java.io.FileReader;
public class generateGML{
public static void main(String[] argv)
throws Exception{
BufferedReader fh = new BufferedReader(new FileReader("filename.txt"));
String s;
while ((s=fh.readLine())!=null){
String[] columns = s.split("\t");
String name = columns[0];
String place = columns[1];
String value = columns[2];
It reads columns,But I want it two dimentionally,as in something like matrix[row_num][column_num].
Can anyone please suggest me..You could do the following:
String[][] array = new String[rows][];
int row_num = 0;
while ((s=fh.readLine())!=null) {
array[row_num++] = s.split("\t");
}However, you need to know ahead of time how many rows to allocate. If you allocate more than needed, you'll need to copy to a new array, or you'll need to keep track of how much is actually populated. If you allocate less than needed, you'll get an ArrayIndexOutOfBoundsException.
Another (likely better) approach is:
Do you really need it as a 2-dimensional array? Can you make a List of objects that have a name, place, and value? Then you don't need to know how big of a list to allocate ahead of time, assuming you use a list that grows itself (like ArrayList or LinkedList). Your code would be much easier to read if you could say:
String name = list.get(10).getName();instead of
String name = array[10][0]; -
How to read a text/html file in java regardless of its encoding?
Hi All,
How to read a text/html file in java regardless of its encoding?
1. Is there any way to identify that a file (read using FileInputStream/or any other means with java.io package) has been saved with which type of encoding i.e. whether the file is using ANSI encoding or Unicode encoding or other?
2. Is there any standard way to read an encoded file (i.e. files having UTF-16 format for Asian locales character support) and un-encoded file (i.e. files having ordinary ANSI format) correctly without knowing the user input?
The problem is that while creating an instance of 'InputStreamReader' (ISR) we can pass the encoding type used (otherwise it takes the system's default encoding type), and the ISR expects the file to be in the same encoding format otherwise it reads it as some junk. But we don't know which file the user is going to pass whether it is Unicode (for Asian locales file should be in Unicode) with or ANSI coded (for non-Asian / English locales user generally uses ANSI encoding).
Regards,
Sam1. There is no reliable way of guessing the encoding of a file without that information. Thats why XML for example has very strict rules wrt. it's encoding (short form: use UTF-8 or UTF-16, if you use anything else, you'll have to specify it)
2. you might be able to make an educated guess if the possible range of encodings is limited, but it will probably never be 100% certain
3. The HTML file might have a header entry "<meta http-equiv..." that tells you about it's encoding. You could try to read the start of the file and see if you find that, then if you found it re-read the entire file.
regards -
I have written a binary file with a specific header format in LABVIEW 8.6 and tried to Read the same Data File, Using LABVIEW 7.1.Here i Found some difficulty.Is there any way to Read the Data File(of LABVIEW 8.6), Using LABVIEW 7.1?
I can think of two possible stumbling blocks:
What are your 8.6 options for "byte order" and "prepend array or string size"?
Overall, many file IO functions have changed with LabVIEW 8.0, so there might not be an exact 1:1 code conversion. You might need to make some modifications. For example, in 7.1, you should use "write file", the "binary file VIs" are special purpose (I16 or SGL). What is your data type?
LabVIEW Champion . Do more with less code and in less time . -
Geting an error trying to import a data file into OWB repository
Hi,
We're using OWB 11.1.0.7.0
I'm trying to import a new data file and I'm getting an error.
When I go to The Project/Files/ I right click on the module I want to add the files to,
I get a 'Wizard' titled 'Welcome to the Import Metadata Wizard'.
I click next.
I get the 'Filter Information' screen that asks if I want to select 'All Data Files' or a specific file.
I pick 'All Data Files' and click 'next'.
I get the 'Object Selection' screen that has a left and right panel. The left side is titled 'Available' and the right side is titled Selected.
The 'Available' panel had the directory in Linux (/etl/datafeeds/dev) where our data files are stored with a plus sign next to it.
When I click the plus sign, I get an error message that says:
API2836: Directory
/etl/datafeeds/dev does not exist.Has anyone seen this? What is the work around? Is it a bug? How do I import a data file into OWB if this isn't the way to do it?
Thanks,Hi, is there any obligation to use import wizard?
can you use right click and import view/table?
Ugur MIHCI
www.ifslibrary.com -
Merge data files into spreadsheet exports 1 field
In acrobat 11.0.5 the 'merge data files into spreadsheet' tool only exports the filename and 1 field. The form was created in livecycle designer ES3 and previous versions created in livecycle 2 and 2.5, using previous versions of acrobat have exported all fields when using the 'merge data files into spreadsheet' tool. IU there a fix for this?
Hi Lori
Many thanks the binding was set to 'none'.
Regards
Dave -
FM req to read the text data of the Delivery(TCode-VL02n) In MM
Hi
Plz tell me the way to read the text data stored in the TAB->TEXT in the TCODE-VL02n for outbound delivery in MM.
I need the WMT Quanity filed name & its respective table,plz tell me if any one know or if exots there an FM to fetch this data.
RegdsTry it like this:
call function 'READ_TEXT'
exporting
id = '0001' "<------This will change for type of text
language = sy-langu
name = tdname
object = 'VBBK'
importing
header = xthead
tables
lines = tlinetab
exceptions
id = 01
language = 02
name = 03
not_found = 04
object = 05
reference_check = 06.
Also, read the documentation that comes with this function module.
Cheers,
Sougata. -
Hi,
I am facing a problem in XI. I have a file Adapter which fetches the data file from the appln server. For the testing purpose we kept the adapter disabled and placed th files in the directory. When activating the adapter, it fetches all files and brings to XI.
Now the adapter is enabled. If I am trying place the data file in the application server while the adapter is enabled, the file simply disappeared/archived as per the setting in adapter. But the data is not coming into XI.
This problem occurs only when the adapter is on and placing the files in the server.
Can any one help me on this?
Thanks.
Jahir.Hi,
http://xiserver:port/MessagingSystem/monitor/monitor.jsp
have a look at this link and check if you have any errors
over there
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>
Maybe you are looking for
-
Cannot push contacts to Motorola L2
Copying contact entries from my Motorola L2 to Address Book through iSync: No problem. Inadvertently deleting contacts from phone through Address Book and iSync: No problem. Copying restored contacts from Address Book back to phone: BIG problem. Noth
-
Seriously? Is there not any way to view and read DRM-protected books downloaded on iTunes on my MacBook Pro? I cannot believe that there is not any way around this! I seem to constantly get confounded by what seems to be the most amazingly unbelie
-
Hi I am facing a weird issue and need your help. At one of our client side when we run ssis package through UC4 (scheduler i have no idea ) the date implicitly converts into YYYY-DD-MM format and this is why our package is failing, The culture setti
-
My ISP is called iBurst and operates in South Africa and Australia. In order to load/download or browse on the web, you have to set the MTU to 1392 (it is by default 1500). To do this on my iMac & MacBook Pro, you use [System Prefs - WiFi - Advanced
-
Hello so this is my first after effect EFFECT so im kind of slow but learning as fast as i can. Basically i took a still ima ge then applied shatter to it. made it a video and everything works but the thing is i want the still image to be 6-7 second