Real probs with PATH file

IM having real problems with the PATH file on a SUN 220R running Solaris 9, when i log in as root all I have available is the .dtprofile, Ive read all over the place that you need to edit the .profile, but i cant find it.
I have the root user using sh, and another user using the bash, neither of them have a .profile
All this came about after a rebuild and now when trying to install samba the ./configure script looks for the gcc compiler. Ive downloaded this and also installed it from the Sun companion cd, but how to i make the system use it as default?
Please im tearing my hair out over this one!!!

For the .profile file, you actually nned to create one if you did not have one.
Try to do the command 'ls -la | more ' and check again. If you would like to
revise an existing one is in the /etc/skel, these are templates which you could used.
As for the gcc, check your path. use the command 'set' to see you present PATH.

Similar Messages

Real Probs with PATH file and gcc

IM having real problems with the PATH file on a SUN 220R running Solaris 9, when i log in as root all I have available is the .dtprofile, Ive read all over the place that you need to edit the .profile, but i cant find it.
I have the root user using sh, and another user using the bash, neither of them have a .profile
All this came about after a rebuild and now when trying to install samba the ./configure script looks for the gcc compiler. Ive downloaded this and also installed it from the Sun companion cd, but how to i make the system use it as default?
Please im tearing my hair out over this one!!!

For the .profile file, you actually nned to create one if you did not have one.
Try to do the command 'ls -la | more ' and check again. If you would like to
revise an existing one is in the /etc/skel, these are templates which you could used.
As for the gcc, check your path. use the command 'set' to see you present PATH.

Probs with large files in adapter engine

Hi all,
in a scenario I'm currently working on, I have to process files (from file adapter). These files have 1KB up to 15MB. So I set up the tuning parameters, that files with more than 2MB are queued in this special queue for large messages. This works fine. small messages are processed directly and the larger messages are queued and processed in sequence by the integration engine.
My problem is now on the point where the integration engine sends this large files to the adapter engine. There are always 4 messages in parallel sent to the adapter engine and this slows down the whole system due to an additional self-developed module.
So my question is: Can I restrict the sending of the messages to only 1 at a time from integration engine to adapter engine?
The time of processing is not important. I think I can handle this with EOIO, but is there an other way? Perhaps depending on the queue?
Thanks
Olli

Hi William,
thx for your reply.
Yes I think it is the easiest way. But the problem is, if a message runs to a failure the others will not be processed until the failure is fixed or processing is canceled.
So I hoped to find a solution where I can restrict the sending to the adapter engine to one message at a time in order to not affect the processing of the other messages as in EOIO.
Regards
Olli

Strange HTTP probe with .cfm files.

Hey All,
I setup an http probe that checks a .cfm page for a keyword. according to the documentation there needs to be a content-length in the header for this to be parsed correctly. For some reason this .cfm page does not send the content-length. The developer manually told coldfusion to put the content-length in the header and I can see that the header now has the content-length. The probe is still failing with "Unrecognized or invalid response" If i put a test html page with a keyword, it parses it correctly and passes. If i change the keyword it fails as expected. Has anyone had any issues with the headers of coldfusion? There is no compression on the server side. Below is the probe.
probe http KEYWORD
interval 15
passdetect interval 30
request method get url /index.cfm
open 2
expect regex "go"
Any help or suggestion would be much appreciated.
Regards,
Christian

Hey Christian and Paul,
Actually, when using expect regex, you don't need the expect status. I alerted the documentation team about this and they have updated the documents with the following note:
Note If you do not configure an expected status code, any response from the server is marked as failed. However, if you configure the expect regex command without configuring a status code, the probe will pass if the regular expression response string is present.
Christian,
You mention that you see the error message Unrecognized or invalid response, even with the content-length header added. Is this the same error message you got before your app team added the header? If so, then I might suspect that the ACE doesn't like the format they used. The header should look like this:
Content-Length:
This is per RFC2616 and can be found at section 14.13 here. Note that the C and the L are uppercase, the header name is immediately followed by a colon, and there is a spece between the colon and the value.
I would recommend confirming that the header matches this description in a network capture. If it does match, then I would like to see the capture, if possible.
Thanks and I hope this helps,
Sean

Keeping iTunes library on portable HD? - probs with database files!

I have my music collection on a portable HD, which I use at work and at home.
I add music and update file info at work, but I've learned that although I run the app from the portable HD the database info is kept in the User's Music folder on that machine. Thus, when I get home I don't have the up-to-date file info on my home mac!
Is there a way to change the default location for the database files that iTunes uses? If I could make the portable HD the default location I think I could access 1 constantly updated iTunes library without having to 'Add to Library' and import XML files.
Is this just wishful thinking, or is there a workaround or app which can do this automatically?
Thanks, Lee.

One work around is to just copy the files on one computer and then copy then to the other when you get home.
That's what I do; File/Add to Library, then sort window by date, add the recent ones.
Trouble is things like ratings are kept in the .xml file, in the username/music folder of the local machine, not in the ID3 tags and therefore are not imported with the music!
I have tried to import the .xml file from one mac to the other and keep them synchronised with sync software but iTunes doesn't like it. I've corrupted a 4000-track library like this and started from scratch, so I'm loathe to mess with that again!
The scripts look interesting though. Thanks.

How can I do the same as Windows Explorer with datemodified:11/6/2013 .. 11/13/2013 showing only changed files with path in tree and NOT every folder along the way as Finder seems to do by default? Thanks!

I'm an Apple newbie.
I'd like to be able to list each file in the "Desktop" tree (ie; on the desktop, or in any folder on the desktop, etc.), along with its path, that has been modified since a certain date.
When I use Finder to do a similar search, I get tons of output including every folder in the path to the modified file, etc. Although I can view the path to the individual files in the output, I can't for example, order the output by path, etc. Very difficult to sort through. I'd love to have output like the example above - just the filename and path for each changed file. Possible? Thanks in advance!
Wayne

The file structure is a little complex. I will use inbox as an example.
Inbox (a large file with no file extension)
Inbox.msf ( An index of inbox with tags etc. Can be deleted with only loss of tags)
Inbox.sdb (a folder, indicating that the folder within Thunderbird has a sub folder.
POP mail is stored in
Appdata/Roaming/Thunderbird/Profiles/*.default/Mail/[Server name]/
Local folder is stored in
Appdata/Roaming/Thunderbird/Profiles/*.default/Mail/Local Folders/
As long as you do not overwrite, you can copy and paste whole folder trees into local folders (stuff on your old computer under a mail account is best relocated to local folder and then sorted as necessary afterwards.
Note that you should delete foldertree.json after making those sorts of copies (it forces a full refresh of the folder tree, no cache) and under no circumstances copy data with Thunderbird running. It can irrevocably corrupt things

[bash] How to uniq files in a file list with paths?

Hi folks,
I know I can get rid of duplicate entries in a list by sorting and uniqing:
sort file | uniq
But how can I uniq filenames in a file list with paths?
/foo/abc.bar
/foo/def.bar
/foo/bar/def.bar
/foo/ghi.bar
Is it necessary to write my own comparison routine like “output thisline if basename(thisline) != basename(lastline)” (would require a basename-sorted input list)?

arith wrote:
Hi folks,
I know I can get rid of duplicate entries in a list by sorting and uniqing:
sort file | uniq
Or 'sort -u':
$ cat test
a
e
b
d
c
a
d
$ sort -u test
a
b
c
d
e
arith wrote:
But how can I uniq filenames in a file list with paths?
/foo/abc.bar
/foo/def.bar
/foo/bar/def.bar
/foo/ghi.bar
Is it necessary to write my own comparison routine like “output thisline if basename(thisline) != basename(lastline)” (would require a basename-sorted input list)?
I came up with
$ cat test
/home/karol/test/test0
/home/karol/test/test/test0
/home/karol/test/foo/test00
/home/karol/test/foo/bar/test0
/home/karol/test/foo/bar/test1
/home/karol/test1
$ awk -F/ '{print $F" "$NF}' test | sort -k2 | uniq --skip-fields=1 | awk '{print $1}'
/home/karol/test/foo/bar/test0
/home/karol/test/foo/test00
/home/karol/test/foo/bar/test1
but I think there's a better way to do it ;P

Probs with imported swf file

Hi
I have imported a swf file which is displayed correctly
within the import dialog. After clicking OK only the placeholder of
the imported animation is seen. When running the captivate movie
the swf is not diplayed. When setting the swf to synchronize to
movie all frames of the swf are displayed but don't stop where they
are supposed to do. Unfortunately this swf file was exported from
the authoring system opus xe so I don't have a chance to edit it in
flash itself.
Maybe someone knows a solution for this prob?
T.

It sounds like the swf file may not be 30 frames per second.
I'm using v1.01 and I've had a lot of problems with swf files
loading consistently. A few times when I positioned the swf file at
the very beginning of the Captivate timeline it wouldn't load.
Moving it a half second up on the timeline fixed the
problem.

FM for getting teh file name with path

Hi guys,
Is there an fm getting the file name with path given the physical path and file name? Thanks!

Hi Mark,
Function Module WS_FILENAME_GET is obsolete, dont use it.
Use the Method file_open_dialog of class cl_gui_frontend_services as given below.
DATA:
    lt_filetable TYPE filetable,
    lf_rc        TYPE i,
    lv_filename(50) TYPE c,
    lv_fileext(3) TYPE c,
    ls_file TYPE file_table,
    lv_file TYPE localfile,
    lv_title TYPE string.
lv_title = sy-title.
lv_progname = sy-cprog.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
    EXPORTING
      window_title            = lv_title
      file_filter             = '*.txt'
      multiselection          = abap_false
    CHANGING
      file_table              = lt_filetable
      rc                      = lf_rc
    EXCEPTIONS
      file_open_dialog_failed = 1
      cntl_error              = 2
      error_no_gui            = 3
      not_supported_by_gui    = 4
      OTHERS                  = 5.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
               DISPLAY LIKE 'E'
               WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    EXIT.
ENDIF.
* Number of selected filed must be equal to one.
CHECK lf_rc = 1.
* Access selected file
READ TABLE lt_filetable INTO ls_file INDEX 1.
CHECK sy-subrc = 0.
lv_file = ls_file-filename.
SPLIT lv_file AT '.' INTO lv_filename lv_fileext.
Revert back if you need clarifications.
Regards
Karthik D

Help with linked files/ compound paths please

Hi - I am working with an illustrator file from another designer which has a compound path with linked files - when you link a new file the image is automatically resized and clipped to the path. I am able to edit it but i want to make my own from scratch and can't figure it out. I'm working with Illustrator CS6. Any help greatly appreciated. Thanks

Hi Steve - thanks for the reply - my question was a bit vague as I wasn't entirely sure what I was working with but I think your point about the new linked image scaling to the same size as the existing file has helped me understand it a bit more. What I want to know how to do is to make an entirely new file with a clipping mask that I then link an image to. I made a file with a clipping mask on the page and then chose file>place but the image I import is not being clipped (I ticked the link option when importing it) I see it working with the existing file I'm working with but I need to know how to make a new one myself.
If this makes it clearer here's what I want to do ...
I am making a banner, I have 3 flat jpegs of t-shirts that I want to place on the banner without their white background. I made a clipping mask the same shape as the outline of the t-shirt and now I want to import the jpeg so it is a linked file and is clipped by the clipping mask and so I can use it in future to import different t-shirt image in without scaling and clipping them each time.
REally appreciate your help, thanks.

Agp probs with GeForce4Ti4200

hi @all!
My prob is, that my geforce is working in AGP 2x mode instead of AGP 4x. i treid to install several drivers but it does not work. in my bios AGP 4x is enabled. i first thought its a prob with win2000prof, but this i checked (regedit).
win2000prof
PIII 800
Biostar M6VCF (VIA82C694X/82C686A)
i hope sb can fix my prob. thx for your help

Old VIA chipsets don't like AGPx4. There isn't any real loss of preformance here so for stability it would be best to leave it alone.
If you want to try it still then install the VIA 4 in1 and if this won't enablr AGPx4 you can create an enpty .reg file and paste in it :
/start copy here/
REGEDIT4
; For Win9x/WinME
[HKEY_LOCAL_MACHINE\Software\NVIDIA Corporation\Global\System]
"EnableVia4x"=dword:00000001
; For NT4/WIN2K
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\nv4\Device0]
"EnableVia4x"=dword:00000001
/end copy here/
Now double click this file.
This will force AGPx4 on a VIA chipset.
To undo create another such file and paste in it:
/start copy here/
REGEDIT4
; For Win9x/WinME
[HKEY_LOCAL_MACHINE\Software\NVIDIA Corporation\Global\System]
"EnableVia4x"=dword:00000000
; For NT4/WIN2K
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\nv4\Device0]
"EnableVia4x"=dword:00000000
/end copy here/

CMS crash with core files and multiple report output generation

Happy new year to everyone,
Our BOXIR3.1SP6FP2 env has recently started behaving weirdly by triggering multiple output to users inbox and email notification out of scheduled reports. Also we have noticed the CMS crash with core file (almost 4GB) generation at the time of multiple report output.
Most of the times, CMC crashes and recycles itself. At few times, CMS services alone went shut down.
OS details: RHEL 5.5, 32 GB RAM, 8 core processor on each of the clustered node, Oracle 10GR2.4 CMS DB server, 11GR2.4 oracle reporting DB server and oracle 11.1.0.6 client.
2015/01/21 23:54:37.946|>=| | |28123|1534131088|{|||||||||||||||DBQueue::Read
2015/01/21 23:54:37.946|==| | |28123|1496185744|
|||||||||||||||(OracleStatement.cpp:156) Prepare: SQL: SELECT ObjectID,
Version, LastModifyTime, CRC, Properties FROM CMS_InfoObjects6 WHERE ObjectID
IN (1004050) ORDER BY ObjectID
2015/01/21 23:54:37.946|==| | |28123|1496185744| ||||||||||||||(OracleStatement.cpp:183) Prepared statement Execute
2015/01/21 23:54:37.965|==| | |28123|1496451984| |||||||||||||||SResourceSource::LoadString 50293
2015/01/21 23:54:37.966|==| | |28123|1496451984| |||||||||||||||SResourceSource::LoadString Unknown exception in database thread
2015/01/21 23:54:37.967|==| | |28123|1496451984| |||||||||||||||SResourceSource::LoadString 33007
2015/01/21 23:54:37.967|==| | |28123|1496451984| |||||||||||||||SResourceSource::LoadString CMS is unstable and will shut down immediately. Reason: %1...
2015/01/21 23:54:38.506|==| | |28123|1496185744| |||||||||||||||(OracleStatement.cpp:156) Prepare: SQL: SELECT ObjectID,
Version, LastModifyTime, CRC, Properties FROM CMS_InfoObjects6 WHERE ObjectID IN (1009213) ORDER BY ObjectID
2015/01/21 23:54:38.506|==| | |28123|1496185744| |||||||||||||||(OracleStatement.cpp:183) Prepared statement Execute
2015/01/21 23:54:38.512|==| | |28123|1455592672| |||||||||||||||(sidaemon.cpp:549) SUNIXDaemon::run: server restart flag is 1..
2015/01/21 23:54:38.513|==| | |28123|1455592672| |||||||||||||||(sidaemon.cpp:552) SUNIXDaemon::run: in abort ...
2015/01/21 23:54:38.513|==| | |28123|1455592672| |||||||||||||||(sidaemon.cpp:555) SUNIXDaemon::run: doing the WithAbort case ...
2015/01/21 23:54:38.520|==| | |28123|1496185744| |||||||||||||||(dbq.cpp:1357) DBQ: Time required to read 1 objects: 20.000000 ms
Thank you,
Karthik

Hi Denis,
I'm trying my best for the last few weeks to understand the core issue along with SAP however it is still a mystery.
>Ulimit -a
core file size          (blocks, -c) 0
data seg size           (kbytes, -d) unlimited
scheduling priority             (-e) 0
file size               (blocks, -f) unlimited
pending signals                 (-i) 270335
max locked memory       (kbytes, -l) 32
max memory size         (kbytes, -m) unlimited
open files                      (-n) 1024
pipe size            (512 bytes, -p) 8
POSIX message queues     (bytes, -q) 819200
real-time priority              (-r) 0
stack size              (kbytes, -s) 10240
cpu time               (seconds, -t) unlimited
max user processes              (-u) 270335
virtual memory          (kbytes, -v) unlimited
file locks                      (-x) unlimited
Below is the observation as part of troubleshooting:
1. CMS breaks at threshold of 3.9 G.
2. CMS DB sits in a different Linux server than BOE server.
3. All core files were generated by boe_cmsd process and are almost 4GB in size (same as max threshold which it breaks).
4. Shell script which I've added in the BOE servers shows that the CMS DB is available/connecting at the time of CMS crash.
5. SAP analysed the Core files and skeptical about the below lines.
     #3 0x58687b80 in skgesigCrash ()
      from /opt/oracle/product/11.1.0/client_1/lib32/libclntsh.so
     #4 0x58687e0d in skgesig_sigactionHandler ()
I'll continue troubleshooting with a hope to fix it at the earliest.
Thanks,
Karthik

View Master mode strange behaviour with jpg files

Hy all,
I'm using Aperture, and I'm tweakin a lot the SW to discover all secrets ....
I'm really concerned about a strange behaviour of the SW in view mode.
If I open a jpg file, do not apply ANY modification, and apply the "show master" command (pressing M), there's a subtle behaviour :
*the images get sharper !!!!*
It behaves as if an "edge sharpening" was applied !!!!!!
With _RAW files this thing doesn't happen at all._
Even stranger, if I zoom to full definition (by pressing Z), and toggle between normal view and "show master" view, the immage remains the same !
The effect is not so evident with all images, but sometimes it is !!
Anyway, I expect not to have such kind of things with a professional SW.
With professional cameras and good quality files it's really annoying not to beeing sure what's the REAL content of the jpg image.
Has anyone noted this thing ? Is there a reasonable explanation ?
The only one I tried to figure out is the following : may be Aperture applies some kind of resampling algorithm with jpg files (bicubic, bilinear, etc).
May be this resampling is not applied with 100% magnification, as weel as with raw files.
But it's only my guessing. Now, I'm tweaking other viewers and other SW to understand what's the real jpg image stored in the file : the blurer one form normal view or the sharper one with "show master" mode.
I stress once again : of course, the jpg file I'm talking about have no settings at all, just imported and toggled with M button.
Thanks in advance.
Regards,
Enzo

Hy,
I'm afraid I'm not been clear.
The problem is this :
1) jpg image opened in normal view mode, no zoom, (no quick preview, of course) : image with a certain amount of blour
2) jpg image opened in show master mode, no zoom, (no quick previre, of course) : image SHARPER with respect with the previous.
No edit applied from import, so "show master" command shouln't apply any change in rendering, should it ?
The only thing I said on 100% view is that such difference (between normal mode e show mastermode) is not present with 100% magnification.
That was the issue.
Enzo

SharePoint 2010, Visual Studio 2010, Packaging a solution - The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters.

Hi,
I have a solution that used to contain one SharePoint 2010 project. The project is named along the following lines:
<Company>.<Product>.SharePoint - let's call it Project1 for future reference. It contains a number of features which have been named according
to their purpose, some are reasonably long and the paths fairly deep. As far as I am concerned we are using sensible namespaces and these reflect our company policy of "doing things properly".
I first encountered the following error message when packaging the aforementioned SharePoint project into a wsp:
"The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters."
I went through a great deal of pain in trying to rename the project, shorten feature names and namespaces etc... until I got it working. I then went about gradually
renaming everything until eventually I had what I started with, and it all worked. So I was none the wiser...not ideal, but I needed to get on and had tight delivery timelines.
Recently we wanted to add another SharePoint project so that we could move some of our core functinality out into a separate SharePoint solution - e.g. custom workflow
error logging. So we created another project in Visual Studio called:
<Company>.<Product>.SharePoint.<Subsystem> - let's call it Project2 for future reference
And this is when the error has come back and bitten me! The scenario is now as follows:
1. project1 packages and deploys successfully with long feature names and deep paths.
2. project2 does not package and has no features in it at all. The project2 name is 13 characters longer than project1
I am convinced this is a bug with Visual Studio and/or the Package MSBuild target. Why? Let me explain my findings so far:
1. By doing the following I can get project2 to package
In Visual Studio 2010 show all files of project2, delete the obj, bin, pkg, pkgobj folders.
Clean the solution
Shut down Visual Studio 2010
Open Visual Studio 2010
Rebuild the solution
Package the project2
et voila the package is generated!
This demonstrates that the package error message is in fact inaccurate and that it can create the package, it just needs a little help, since Visual Studio seems to
no longer be hanging onto something.
Clearly this is fine for a small time project, but try doing this in an environment where we use Continuous Integration, Unit Testing and automatic deployment of SharePoint
solutions on a Build Server using automated builds.
2. I have created another project3 which has a ludicrously long name, this packages fine and also has no features contained within it.
3. I have looked at the length of the path under the pkg folder for project1 and it is large in comparison to the one that is generated for project2, that is when it
does successfully package using the method outlined in 1. above. This is strange since project1 packages and project2 does not.
4. If I attempt to add project2 to my command line build using MSBuild then it fails to package and when I then open up Visual Studio and attempt to package project2
from the Visual Studio UI then it fails with the path too long error message, until I go through the steps outlined in 1. above to get it to package.
5. DebugView shows nothing useful during the build and packaging of the project.
6. The error seems to occur in
CreateSharePointProjectService target called at line 365 of
Microsoft.VisualStudio.SharePoint.targetsCurrently I am at a loss to work out why this is happening? My next task is to delete
project2 completely and recreate it and introduce it into my Visual Studio solution.
Microsoft, can you confirm whether this is a known issue and whether others have encountered this issue? Is it resolved in a hotfix?
Anybody else, can you confirm whether you have come up with a solution to this issue? When I mean a solution I mean one that does not mean that I have to rename my namespaces,
project etc... and is actually workable in a meaningful Visual Studio solution.

Hi
Yes, I thought I had fixed this my moving my solution from the usual documents to
c:\v2010\projectsOverflow\DetailedProjectTimeline
This builds ok, but when I come to package I get the lovely error:
Error 2 The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters. C:\VS2010\ProjectsOverflow\DetailedProjectTimeline\VisualDetailedProjectTimelineWebPart\Features\Feature1\Feature1.feature VisualDetailedProjectTimeline
Now, the error seems to be related to
Can anyone suggest what might be causing this. Probably some path in an XML file somewhere. Here is my prime suspect!
<metaData>
<type name="VisualDetailedProjectTimelineWebPart.VisualProjectTimelineWebPart.VisualProjectTimeline, $SharePoint.Project.AssemblyFullName$" />
<importErrorMessage>$Resources:core,ImportErrorMessage;</importErrorMessage>
</metaData>
<data>
<properties>
<property name="Title" type="string">VisualProjectTimelineWebPart</property>
<property name="Description" type="string">My Visual WebPart</property>
</properties>
</data>
</webPart>
</webParts>
.... Unless I can solve this I will have to remove the project and recreate but with simple paths. Tho I will be none the wiser if I come across this again.
Daniel

Install iTunes 10.4.1 install error - The Folder Path "File Name" contains an invalid character

Upgraded computer from XP Prof 32-Bit to Windows 7 Ultimate 64-Bit (Upgrade package, performed Custom Install).
Attempt to install iTunes 10.4.1 for 64-Bit. Receiving the following error/problem:
The Folder Path "File Name on my external drive" contains an invalid character
I click ok and then get this:
The Installer encountered errors before iTunes could be configured. Errors occurred during installation. Your system could not be modified, Please run the installer again, or click Finish to exit.
Any fixes for this?

Sorry, one of us is not managing to be clear enough.
Does the message read The Folder Path "File Name on my external drive" contains an invalid character or perhaps The Folder Path "<some path name here>" contains an invalid character?
If so, then the problem might be just what it says it is with the path name in question... Either way if you list the path given in the error message in a reply to this thread it might provide a clue for anyone tying to help with the problem.
You could try downloading the installer to C:\iTunesSetup.exe in case that helps.
tt2

Real probs with PATH file

Similar Messages

Maybe you are looking for