Real Sum aggregation, when using Constant selection
Hi, all!
I have to infoproviders:
Cube1
MATERIAL
PLANT
CALDAY
FLAG
KYF1
Flag - may be considered as attribute of MATERIAL x PLANT x CALDAY
Cube2
MATERIAL
PLANT
CALDAY
KYF2
I need to analyze next slice:
FLAG
MATERIAL
KYF1
KYF2
Thus, I get next results
F1 M1 1 0
F1 M2 3 0
F2 M3 2 0
M1 0 10
M2 0 5.
M3 0 3.
So I can't see KYF2 for FLAG values. To see it I make KYF constant selection for FLAG. So I can see KYF2 for corresponding MATERIALs:
F1 M1 1 10
F1 M2 3 5
F2 M3 2 3
But if I use result lines, they show whole sum for KYF2, not dividing between flags, because I use constant selection:
F1 M1 1 10
F1 M2 3 5
Totals 4 18
F2 M3 2 3
Totals 3 18
Glob Totals 7 18
And the question is:
Is there any way to make result calculation use sum of underlying items, not using OLAP to calculate it?
Thanx in advance.
PS: I cant use infoset for joining two cubes, becuase I need to use outer join, which is forbidden on cubes.
PPS: I cant use separate DSO or IOBJ for storing FLAG, because it has too many values.
How this can help me? This will give me total for every material for FLAG = #.
I found solution:
I hust create restricted KF with CS on FLAG
Then Calculated KF where this RKF is multiplied by reference to MATERIAL (for intermediate aggregation). Then I use the CKF in report structure with time restrictions.
It works!
Thanx for your tries.
Similar Messages
-
Problem with 0FIGL_VC1 when use constant selection in the query
Please kindly help me. I have this problem for 2 weeks already.
When I create a query from virtual cube 0FIGL_VC1 (balance sheets / p&l statements), if I use constant selection in any of key figure, my report could not display financial statment correctly.
My report layout
Columns : key figures (including 0FIGL_VC1_CK001)
Rows: 0GLACCEXT (financial statement item) << as hierarchy
Initially, the query is processed correctly.
However, based on the requirement from my customer, I really have to use "constant selection" for some of my columns. Whenever I do so, the query display incorrectly. (Some nodes of financial statement item just disappear. (it seem like all contra item will disappear.)
Please help!If I dont use constant selection in the query, data are display correctly.
But If I use constant selection in the query, some financial statement item dont display any value
Example :
Financial statement item(Display in hier) Period1 Total Period1(Constant selection)
A 10 60
B 20 60
C 30 60
D 0 60
- Financial statement item "D" has some value.
- Financial statement item "D" is in the hierarchy,one gl account has been assigned to more than one group differentiated by debit/credit indicator.
Please help!! -
How to skip authorisation for infotype when using dynamic selection ?
Hi folks,
I have a problem here.
When im using dynamic selection screen, i cannot skip authorisation for subtypes of an infotype. Eg. if my record for 0185 have records that do not have authorisation for the subtypes. Dynamic selection will filter away this record and will not get me into the Get Peras as id i use to run has authorisation configured. IT will skip out of Get Peras.
However, if im not using dynamic selection screen, i will use the normal pnpce fields, i will be able to get the record, as i do my authorisation check using function module in the get peras, and i did not declare 0185 in the infotypes.
May i know if there is any solution to this problem as dynamic selection screen is a standard...
Thanks,
lihuihi,
however i cannot skip authorisation for the whole pernr as i need the authorisations for the processing reports.
Currently the case is like this..
i have a authorisations for infotype 0185. i have 2 subtypes records such as ZA and ZB. the user does not have authorisation to read ZB but has authorisation to read ZA.
However, when use dynamic selection, it will skip out the pernr.
If the pernr 0185 records has only ZA subtype but no ZB subtype, it will not skip this pernr when using dynamic selection.
Anymore idea how to overcome this? -
In PSE8 when using a selection took, unselected area turns red.
When using any of the selection tools, the unselected area turns red. How can I correct this?
Generally that just happens when using one of the Type Mask Tools or you get a red mask when using the Selection Brush Tool
in mask mode with Add to Selection enabled before starting the mask.
Could you post a screenshot? -
Cant use constant selection for ONE restriction in selection
Hi, all
BW70 SP8, BI Addon SP8 Rev 802. I cant use constant selection for ONE restriction in selection, i can set constant selection only for whole selection, but it fix value for all query. I need to fix only one character value.
Is there a way of doing this?Global restricted key figure doesn't allow to restrict one char too. There is no constant selection checkbox in restricting char context menu.
I use multiprov. Prov1 consists of Char1, Char2 and KF1. Prov2 consists of Char1, Char2, and KF2.
I want to restrict Prov2.Char2 to # for KF2, and not restrict Char1, but! I can set constant selection for only whole selection(KF2 and Char2=#). So it has same value for all Char1 values. I need to constant selection only for char2. -
When using multi select in some utilities error RME-00011 occurs
When using multi-select in some utilities of headstart
eg. Enforce CDM Ordering Standard for Colums
RME-000011 error occurs:
RME-00011: Operation 'upd' on COLUMN has failed
Activity aborted with API errors.
Does someone know what went wrong?
regards,
marcelMarcel,
Could you please let me know what utility causes this erroneous behaviour? Is it possible to give a reproduceable description? I'm not aware of this problem. If you can force the failure again, is it possible to include the last part of the debug detailed log (set message level for user at 'debug detailed') in this thread?
Kind regards,
Marc Vahsen
Headstart Team -
PPro CC crashes when using Track Select tool
This is probaby the most bizzare bug i have encountered so far - everythig works - i can scub, play and adjust footage, apply effects, titles and time remapping, but when i select Treack Select tool and click on the timeline, Premiere Pro crashes.
This is a new develpment as well - i was able to use PPro CC just fine since i installed it (trial version), until yesterday.
No new applications or updates for Windows, Nvidia card or Adobe were installed lately, but all drivers are up to date (according to various update managers)
Premiere CS6 works fine with the same sequence (mixed RED and DSLR footage)
Problem signature:
Problem Event Name: APPCRASH
Application Name: Adobe Premiere Pro.exe
Application Version: 7.0.0.342
Application Timestamp: 5176598d
Fault Module Name: ntdll.dll
Fault Module Version: 6.1.7601.17725
Fault Module Timestamp: 4ec4aa8e
Exception Code: c0000005
Exception Offset: 0000000000052fc6
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional Information 1: 1ce0
Additional Information 2: 1ce04770b02f823ff20b7f82076eba51
Additional Information 3: c192
Additional Information 4: c19212ee5e1e8407cb093e848f6cb5d8
System specs:
Creative Suite CS6 subscription
Creative Cloud trial
Windows 7 x64, SP1
Nvidia Quadro 4000 GPU
i7-3039k CPU
32Gb of RAM
thank youYep, buggy project..
New project with same and different footage works fine
Other project created in CC works fine
Imported sequence from CS6 works fine
Imported sequence from a buggy CC project into a new project causes crash on using Track Select tool
I was able to revert the project in question to CS6 via Final Cut Pro XML, also works fine (for now, at least), just have to redo some time remapping which didn't come through with XML translation, small loss
I guess i'll wait few more months before switching to PPro CC, maybe mysterious bugs will be worked out by then
Thank you for your replies! -
Need help with summing column when using if-then-else
Using logic
<?xdofx:if INVOICE_BILL_AMT_IN_INV_CURR is null then INVPROC_BILL_AMOUNT else INVOICE_BILL_AMT_IN_INV_CURR end if?> for column field.
Having trouble summing the column using the logic above.
Any suggestions would be very much appreciated.
Thanks,
NancyThanks Tim,
That worked. Got rid of my error. However, if the field is null (=''), I get a total.
11.05 + 1429.70 = 1440.75
If the not null (!='') I am not getting a total.
103.74 + 173.13 =
BTW, recently took XML class. Leta Davis highly recommended your blog and I have gotten a lot of great tips from it.
Thanks,
Nancy -
"NI Network Browser Error!" When Using 'DataSocket Select URL'
We have two LV 7.1.1-built executables running on two different computers that are networked together. Each executable starts the DataSocket Server on their own computer and then attempts to read from the other computer's DataSocket Server. Everthing works well if both computers are running XP SP2 or SP3.
The problem occurs when one of the OS's is Windows 2000 SP3. The executable on the XP computer can see the DataSocket items in the 'DataSocket Select URL' window on the Windows 2000 computer. However, on the Windows 2000 computer, if you open the 'DataSocket Select URL' window, and try to browse the DataSocket items on the XP computer, one of the following dialogs appears:
NI Network Browser Error!
Cannot enumerate items in this hierarchy
Cannot open a network enumeration
0x000004b8
An extended error has ocurred.
OR
NI Network Browser Error!
Cannot enumerate items in this heirarchy
Cannot open a network enumeration
0x00000035
The volume path was not found
This is usually followed by a DataSocket Read error of 214701483 (this looks like a COM object error, but for once, Google didn't have anything to say about it).
There was a similar post to this one in which Manuel Wielander suggests setting the 'Authentication Level' to 'Connect' and the 'Impersonation Level' to 'Identify'. He also suggested adding 'ole.AuthnLevel=1' to the executable's ini file. None of these suggestions work. I have also added every exception imaginable to the Windows XP firewall with no luck.
Anyone dare to step into the networking abyss with me on this one? Much thanks in advance for any help or suggestions.
Chris_Mitchell
Product Development Engineer
Certified LabVIEW ArchitectHello Archimedes,
This problem is a bit difficult to track down. I have Win 2k SP4 and WinXP Pro computers and am unable to reproduce the issue at the moment. However, I have found information that this issue has occurred in the past. In some instances it appears that changing the DataSocket Select URL.vi's Preferred Execution System to something other than "user interface" (eg. "Same as caller" or "standard") from VI Properties>>Execution resolves the problem. However, this is not a guaranteed workaround. R&D is aware of the problem and is working to fix it. I apologize for any inconvenience.
Best Regards,
Chris J
National Instruments -
Snapping to pixel grid when using direct selection
Hi,
I'm new to Illustrator and looking to use it for creating some icons for an application I am working on. These icons are relatively small (16x16 and 32x32) and need many of the paths perfectly aligned with the pixel grid to avoid unnecessary anti-aliasing. This functionality seems to work okay when creating new shapes, however when I attempt to modify the points on a path they are snapping to the corners of the pixels rather than the centre, leaving me with anti-aliased lines everywhere. Is there another setting somewhere I need to change (or should I be using another graphics app)?
Andy.Andy,
Align to Pixel Grid limits the options, but you may untick it and work on.
The Align to Pixel Grid setting in the Transform palette itself is the current object, and the other one in the Options is for future objects. -
Problems when using id = "selection"
Hi,
actually this is not a question but a hint if you get the same problem.
If you use htmlb with id = "selection", you will get a JavaScript error after leaving a Input Field.
The problem seems to be in the Javascript sapUrMapi_ie6.js, in function ur_getSelection. There is a direct access to the object window.document.selection... If you name your form or other objects with id ="selection", this statement will be confused.
Workaround: Rename all tags with id "selection".
Actually I should write an OSS Message, but I have no S-User
BTW: This Error will only occur in WAS 7.0
Let me know if this helped or if you mean I should write a blog or a wiki about this
Best regards
Renaldthanks for sharing the information. you can present this in the form of wiki. it will be useful to many people.
-
GROUP BY Problem When Using a SELECT for a column
I have a very complex query that has, as one column, a SELECT clause. Here is a very simplified example from EMP/DEPT to illustrate what I need.
This query works fine without the GROUP BY:
select empno,
(select dname
from dept
where e.deptno = dept.deptno)
from emp e;
How can a GROUP BY be applied to this? The following get a subquery error (not allowed in the GROUP BY).
select empno,
(select dname
from dept
where e.deptno = dept.deptno)
from emp e
group by empno,
(select dname
from dept
where e.deptno = dept.deptno)
And, of course, you can't use column numbers or aliases in the GROUP BY.
Thanks.Eric's solution is not needed in the simple join you posted
I believe he was well aware of that.Although I realize that Ben was aware of that, in the interest of completeness, I said that for the benefit of any others that may have jumped into the middle of the thread. I didn't mean for it to sound like anything other than that. Sorry for any possible mis-interpretation. -
Strange halo when using quick selection tool
It's easier to show than describe it so I added an image
Select/Fill with foreground color (white) and I get this white halo in the non-selected area
The settings in the 'refine edge' dialog , 'sample all layers' and 'auto-enhance' have no effect on thisChris Cox wrote:
Have you tried disabling OpenGL drawing?
Tried , to no avail
Anyway I was messing around with the QST and I found the culprit - my ignorance
All this time I had the contrast in the Refine Edge dialogue set to 0 . Upping it a bit gives a nice clean selection w/out any spill -
Provider Speicifc Properties on MultiCube and constant Selection in Query
Hi Experts
I are using BI 7.0, just upgraded to SP24 and having an issue with a MultiPrvider. All of this worked great before the upgrade. Here are the symptoms I am experiencing. This MultiCube has 2 InfoObjects where "Provider-Specific Properties" are set with a constant value.
1) If I display data on MultiCube I can only get consistent results if I chose for "Field Selection for Output" and select All SID fields. If I don't get any results if SID fields are not selected for display.
2) Query on on MultiCube has a Res. Key Fig. using constant selection on Infoprovider plus other Infoobjects. When I execute I get a dump with errors Brain 222 ( referencing the 2 objects that are set as constant on MultiCube, as well as Brain 635 . I have researched both have not yet found anything helpful. Query does execute if I take off the constant select on Infoprovider but then don't get results I want.
I have tried to re-activate MultiCube. I got warnings on CMP error and inconsistency and messages R7I 114, R7I 127 but activation was successful.
I would be very grateful for any suggestions.
Thanks so much.Can you try log out and re-login??
As well when you display DATA, first of all
1. it ask you select necessary field before you go for FIELD OUTPUR FOR SELECTION
2. Overthere in SELECTION top menu, SELECT the second SELECTION menu, and select option "SELECT CHARACTERISTICS" which is the first one.
3. THen enter
4. now you go to the screen for FIELD OUTPUT FOR SELECTION, in that Select 4th option "SELECT ALL CHARACTERISTICS"
and then execute..
just give a try..
not sure how far it helps..
May i know the restriction which stops you running the query..?
try the constant selection on only one object and try...
Edited by: SAP BI Learner on Oct 28, 2011 5:30 AM -
Constant Selection on MultiProvider is not working properly
Hi All,
We have a MP based on 2 DSOs, say DSO1 & DSO2.
DSO1: Char 1, Char 2, Char 3 and KF1
DSO2: Char 1, Char 2, Char 4 and KF2.
Now, I am creating a query by using constant selection. I have kept all chars in Rows pane and 2 KF in Columns pane. I have restricted KF1 with char 4 and KF2 with char 3 by putting constant selection accordinlgy... However, still I am getting 2 rows of display as below...
char1 char 2 cahr 3 char 4 kf1 kf2
A B C # 10 -----
A B # D ---- 10
Could any one pls suggest how to display in single record... Your help is highly appreciable.
Best Regards
Venkat...Thank you Anshu for your suggestion.
Here, I wrongly mentioned the KF details. Both the KFs are existed in both DSO1 & DSO2. The only thing is DSO1 data is coming from ECC(R/3) and DSO2 data is coming from CRM. Now, I want to show the all chars w.r.t infoprovider wise KF vaues in a single row. Shall we achieve it by constant selection approach? Could you suggest any work around please...
Best Regards
Venkat...
Maybe you are looking for
-
Problem with document splitting and zero balance clearing account
Hi SAP Gurus, We've already configured the document splitting functionality in our project, however we still encounter some issues with the outcome of posting documents. For some scenarios, the document split functionality seem to work. Below is such
-
Path Selection issue in Table Test
Hi All I got issue in adding Form actions (ex:- Table test, Text matching test ) in my Oracle Forms and report product. It is not selecting the Path.. Can any one suggest why the Path is not selecting ...? Appreciate your feed back. Regards, Sairam
-
How do I block netflix advertisement from popping up continuously.
I can't figure out how to block the annoying pop-up window ads from netflix from the address: http://cdn.optmd.com/V2/62428/198310/index.html?g=AQABUc4=&r=www.examiner.com/x-57643-LA-Environmental-News-Examiner
-
I am researching financial software for my Mac. Having used Quicken and MS Money for my Windows PC, I bought Quicken for mac and have not been very impressed with the lack of features. I have found information on a program called iBank and also Money
-
Get current directory(without user.dir)!!!!
Dudes, need help badly... i need to get the current directory of the jar file where it gets launched from. Since the launching takes place from an html file, the system property "user.dir" does not get set to the current directory. Both the html as w