Receive but can't send Centurylink email

Any ideas to help? I have two Centurylink email accounts.  About a month ago, my iPhone stopped sending mail through my Centurylink smtp.  Now, I can receive Centurylink mail but can't send mail or reply from either account on either my iPhone or iPad.  I have talked to CL several times and they have walked me through the screens but to no avail.  I am not experiencing difficulty with my Gmail, Hotmail or Mac mail on the mobile devices.  Should be a solution without having to install a special piece of software.

The first message means you cannot log into the SMTP server. For whatever reason, it is showing this error regarding the username and password. It could have something to do with the fact that you have more than one CL account. We'll check that later.
The second one has to do with a different SMTP error, and that sounds like it is hitting the wrong port, even though you are saying you have corrected to their recommended port. Many ISP email providers will not let you send mail through their SMTP server when not on their network, such as connected by the computer or on your wi-fi at home, unless you can be authenticated. This has something to do normally with the SSL setting and how you are authenticated.
Also, when deleting and adding similar accounts back to the phone, it can also keep/carryover SMTP settings. If you go into Settings>Mail, Contacts, Calendars>tap on the primary account, hoiw many SMTP servers are listed there? There might be a primary and there could also be Other SMTP servers. This may be where your problem lies. Check the settings in the Primary Server. Because you have two accounts, and they of course, have different username and passwords, they could be causing conflict as to which SMTP server is checked there. See if the correct SMTP server is serving the correct account. You can make adjustments in each account area.
We can work from there.

Similar Messages

  • I'm receiving but can't send emails. My out going smtp has gone offline. how can i change this to be online?

    i'm receiving but can't send emails. My out going smtp has gone offline. how can i change this to be online?

    What version of Windows, what mail system and which mail client?
    Start there.

  • HT201320 I am having trouble with my wife's new iPhone 5s. She can receive her telus email but can not send any email what did I do wrong in setting up her account?

    I am having trouble with my wife's new iPhone 5s. She can receive her telus email but can not send any email what did I do wrong in setting up her account on her iPhone? I tried to just copy the info from her old iPhone.

    The sending of email is accomplished via the SMTP server. Take a moment to get back into Settings>Mail, contacts, calendars and select the account. Go to the SMTP server and check to make sure that username and password are entered in all of the appropriate places. If you cannot get it to work after trying to just change those settings, remove the account from the phone and recreate it. When recreating, make sure you enter the username and password in every location, even if the phone says optional. Make sure you have the settings from either the email provider or from the other device. Make sure that SSL is on or off as necessary.

  • I can receive but can't send email

    I can receive but can't send e-mail, my phone keeps asking me to set up a password for outgoing mail but I have done that and still nothing happens.

    try powering it off for a min and then power back on and see if it works.  If not take a look here
    http://support.apple.com/kb/TS3899

  • Email - receive but can't send

    Hi: I can receive e-mail from my POP3 server but can't send. I beleive it is because of a peculiarity of my provider. I use Outlook to send/receive e-mail from this server and in its setup there is an option under the "Outgoing Server" setup tab that says "Log on to incoming server before sending e-mail". That doesn't appear to be an option with the iPhone. Here is a blurb from the service providers FAQ:
    "By default, this server will reject all connections. To authorize yourself to send e-mail, you must first use your e-mail reader to check your account for new e-mail. After you have checked your e-mail, you will be authorized to send e-mail through the server for up to 90 minutes.
    All of our customers have mailboxes which are accessible through POP3 or IMAP. POP3 and IMAP are e-mail retrieval protocols and have authentication built-in. Therefore, any customer who legitimately accesses a mailbox on our servers using POP3 or IMAP is automatically authorized to send outgoing e-mail through our relay service for up to 90 minutes. "
    thanks,
    russ
    p.s. Here is webpage on setting it up: http://www.pair.com/support/knowledgebase/e-mail/setting_up_an_e-mailreader.html

    I also encountered this problem and think I got it solved today. Try the following:
    For your outgoing server, use cwmx.com, which is AT&T's only outgoing server for the Edge network. Don't use a user name or password.
    Then perform what AT&T calls a soft reset. Hold down the power button on the top right side and the circular button on the bottom center at the same time until the Apple logo appears on your screen. Then wait a minute or so, see if you can get internet access through Safari, and if so, the you should be able to send emails from your account. It worked for me, and I hope it works for you.
    Bob

  • I can receive, but can't send.

    Like the title suggests, I can receive emails but can't send them in Mail. I'm living in a university hall now and they have pretty strong firewall which makes me unable to use programmes like LimeWire, and stuff. I'm sure the firewall has something to do with the inability of sending emails. But they say sending emails should be perfectly fine. And since they only know Windows PC matters, I think I should ask you guys first before asking those university Windows PC folks.

    Mail Help has some articles devoted to sending problems, e.g. “I can't send email” or “I can't send email because the connection to the server on port 25 timed out”. You may want to take a look at them in case there is something there that applies to you.
    Something that usually works if you’re trying to use an outgoing (SMTP) server different from the one provided by your ISP (and in the case of .Mac in particular) is changing the outgoing server port to 587 instead of 25 in Preferences > Accounts > Account Information > Outgoing Server Settings.

  • Ios 6 Gmail receiving but can't send

    iPhone 3GS. upgraded to ios 6 and it all seemed OK but after one day I can't send any emails via my Gsync account. Receiving OK but no luck sending at all. Also tried just using basic SMTP Gmail on iphone Mail but that didn't work either. The only way I could force it is to turn WiFi off and then use phone network to send but not doing that on a regular basis as far too expensive. Have had to install Gmail app to work around. Funnily enough have another email which is nothing to do with Gmail and that works without any problems at all. Also have iphone 4 in the house that doesn't use Gmail and that has no problems so it seems that it's only Google's mail that's not working. Weird.

    What version of Windows, what mail system and which mail client?
    Start there.

  • Mac mail can receive but can't send messages

    mac mail, can receive messages, but can't send messages. The sent symbol just spins around, but does not send.

    I am using Mail 7.3, on OS X 10.9.4 (i.e. latest as of Aug 2014).   I have 4 email accounts, all with their own SMTP servers.   All stopped sending email at the same time.
    Taking the hint from your suggestion, I looked in Mail > Preferences > Accounts, and all the SMTP servers were shown as offline (this must be a Mac Mail bug).  All accounts appear to be Online under Mail > Mailbox (pulldown), and are also Online if one highlights the Inbox account, right click.
    The trigger for the bug, in my case, was adding a new email account, and when Mail could not access it, it took everything offline.  Removing that account did not solve the problem.
    After spending hours trying all sorts of alternatives, I found the way to solve the problem was to delete all the outgoing mail servers, and reenter the information (the same information).

  • Can receive but can't send fax. Connected wirelessly, web enabled, all else works. Photosmart 7510

    Can't send fax. Wireless is working. Web enabled on, can receive faxes but can't send.

    Hello,
    The first thing I would do is follow step six in this document to set a static IP: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02817031&cc=us&dlc=en&lc=en&product=4023246&tmp...
    When it askes for DNS information, enter in Google's DNS. Preferred DNS = 8.8.8.8 Alt DNS = 8.8.4.4
    If that does not help, if you could provide me with the following information it would help me out. First, who is your ISP( Internet Service Provider, i.e. Comcast, AT&T, Verizon, ect.)? Second, who is the maker of your router? Lastly, what is the model number and firmware version of your router?
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Receive but can't send email

    I have set up my Iphone 5 email exactly the same as my iPhone 4. Emails are received but outgoing email is left in Outbox. It states the sender address was rejected by the server. How can this be when it works on the iPhone 4?

    Hi there,
    I found you on Mac discussion groups.
    Can you please tell me what to do re, not receiving ALL my emails, and often not being able to send email, even from different wifi servers?
    I have alot of draft mail, sent mail, big mailboxes, etc.
    Thanks.
    Alexis

  • Have optimum online email.  Can receive but can't send

    I just got my macbook pro today. I use optimum online for my internet and primarily use my optimum online email account. When I set up my account, which I have done correctly by consulting with an optonline tech support staff over the phone, I am still only able to receive new email. I cannot send it. When I do, the waiting circle just spins around next to the sent box. My outgoing mail box shows the email but it never leaves my email account. This does not make sense as I have checked my settings with those on the other two macs in my house. I am set correctly. This is very frustrating and I have searched this problem. It seems like others have encountered it, too.

    From Mail menu: Mail>Preferences>Accounts>Account Information. The outgoing mail server should be, mail.optonline.net. Also retype in your password.

  • Receive but can't send emails using Outlook Expres...

    Is anyone else experiencing this again ?
    OE leaves my mail in the Outbox and BT Mail will not accept them on a send/receive. Also still experiencing password rejection problems everytime I send/receive. If I cancel instead of trying again. It receives my mail but will not send it.
    Any ideas please ?
    Thanks.............. 
    Spoiler (Highlight to read)

    I suspect you will all ready have done this because you were previously sending emails but it might be worth doing it again in case there has been a glitch in the system.
    Verify the non BT email address. See this link.
    http://bt.custhelp.com/app/answers/detail/a_id/10903/kw/reset%20BT%20Yahoo%20Password/c/346,412,416/...
    I think you also need to ensure that you have ticked the box “My outgoing server (SMTP) requires authentication" - and you need to use "Log on using" and enter the BTinternet email address/password  you've used to verify the Non BT email address.

  • Can receive but can't send yahoo.co.uk email

    I have tried multiple steps to reconfigure my outgoing email set up for yahoo.co.uk. the server is smtp.mail.co.uk. correct password is entered and i have even specified port 587. unfortunately i am unable to send via this email server. this is from my wifes account. my yahoo email works on my account fine.
    any ideas

    As far as I know, you can only send emails via a third party client (i.e Apple Mail, Thunderbird, Entourage, etc...) if you upgrade your account to Yahoo Mail Plus as we had the same problem a year or so ago.
    Yahoo Plus is $11.00 per year - is it worth it? er...no. Trying to persuade my wife to go to Gmail, but alas the lady is not for turning...so, get your Visa card out and then pop in these settings into Mail:
    Incoming Mail (POP3) Server: plus.pop.mail.yahoo.com (Use SSL, port: 995)
    Outgoing Mail (SMTP) Server: plus.smtp.mail.yahoo.com (Use SSL, port: 465, use authentication)
    Account Name/Login Name: Your Yahoo! Mail ID (your email address without the "@yahoo.com")
    Email Address: Your Yahoo! Mail address (e.g., [email protected])
    Password: Your Yahoo! Mail password
    This, theoretically, should work. However, we are having some major issues with Yahoo Mail at the moment even though we are using Mail Plus - can recieve but cannot send...sometimes. Why? No idea.

  • Yet another can receive, but can't send mail problem.

    I’m having trouble with Mail. I have reviewed the various posts by others who have a similar problem. I’ve tried their suggestions, but none have worked for me. I just bought a new G5 PowerMac. I have set the account preferences exactly like my PowerMac G4 and PowerBook G4, but I cannot send messages on any account. I can receive messages. When I try to forward a message by clicking the forward button, nothing happens - no new reply window appears. Likewise, when I compose new message and click the send button nothing happens. My setting are correct and the same as the other Macs noted above. Both of them will send and receive messages using the same DSL connection as the G5. I have two hard drives on my G5 both with OS 10.4.3 installed. I use the second drive to start up on when I have trouble with my main drive. I started on the other drive, which had no mail settings, and tried to set up my accounts. In this case I got a message stating that the mail server could not be accessed. I went ahead and set the accounts anyway, then made sure the settings were correct. This implies that there is something wrong with my new G5 or there is a bug with Mail using the G5 since I have no problems with the other Macs. I haven't time to contact the help line and hope someone knows how to fix this problem.

    Hi Dancing Brave,
    Thanks for visiting Apple Support Communities.
    I recommend starting with the steps in this article if you are not able to send mail:
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/ts3276
    Best,
    Jeremy

  • Can receive but can't send mail via BT Yahoo SMTP server port 995

    Suddenly I can't send mail from my BT/Yahoo account but can still receive mail. The message that i get is that it was rejected by the server. I have not changed the server - it is still SMTP via port 995, using SSL. Help!! Why should this have ocurred out of the blue and what do I do?

    Hi Dancing Brave,
    Thanks for visiting Apple Support Communities.
    I recommend starting with the steps in this article if you are not able to send mail:
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/ts3276
    Best,
    Jeremy

Maybe you are looking for

  • Recommendations please on Exchange 2013 resources

    I am migrating users and resources from Ex2007 to Ex2013.  I have several different mailboxes on 2007 that are set up as "users", but they are really more of a shared resource Calendar, for departments to use for "time off" or departmental to do list

  • Issue in Workflow

    Hi Guys, I have two issues in WF. 1.     I have created Task and assigned function to that and in function i am raising an exception but in my WF log it doesn’t show in error. 2.     Normally  if there are two person holding same position the WF goes

  • Absolute URLs  not working when file is on a remote server.

    My client has asked me to provide a template for an investor relations section of their website. The HTML page or template for this page will be at the service providers site, but all the images etc. for the page will be linked to files on my clients

  • Add new LoadVar properties

    Im a beginner at flash and my english isnt that good eather but i'll give it a shot. I know that you can add new properties in a variable like i'll show in the first part. But is there anyway that i can do it as i will show in the second part?

  • Dimension: Automatic Updates of Lower Level Records

    Hi - In a dimension, when the parent level record gets updated, does OWB automatically update the child records too? For example, lets say I have two levels - Product Category and Product. So, the product records will have the product category attrib