Receive two notifications (Warning and Critical) from Alert raised by Monitor
Hello,
Here's a problem. I use Windows OS management packs (for windows server 2003-2008-2012) and I need to create notification two times:
1. When logical disk free space monitor is in Warning state (changes state from Health->Warning)
2. When monitor changes state from Warning->Critical.
Now I can only set to Alert to be raised 1 time (Warning or Critical, Critical only), so notification reacts only one time. I created two notification subscription, but alert is raised only one time, and then only severity changes, notifications can't react
to this.
As far as i have read documentation, I will need to create custom monitor or rule for it, to create different alert.
I have tried to create Orchestrator Runbook with Get-Monitor element in it, but i cannot filter only 3 free space monitor that I need. It targets only Logical disk with some other monitors. SCOM Powershell Module also doesn't have needed tools to accomplish
this task.
Anyone has any ideas? Thanks in advance.
SCOM 2012 R2 Update Rollup 4
MP: Windows Server 2012 Operating System (Monitoring)
Version: 6.0.7296.0
Windows 2012 Logical Disk Free Space Monitor
Alerts name, raised by this monitor - "Logical Disk Free Space is low"
I accomplished this task using SC Orchestrator. There you can use Get-Alert object to filter all alerts by name and warning severity, and then use it to send notifications. When monitor changes to Critical, in-SCOM Subscription can send notifications (you
just select critical severity option).
Similar Messages
-
How to capture tablespace warning and critical messages
Hi,
Where in the database dictionary, the tablespace threshold percent (warning and critical) defined by the user is stored.
Requirement is to set threshold percent (warning and critical) in OEM and in a function (for User-Defined Metrics) or procedure (for scheduler) check for Tablespace PCT_FULL against the set threshold percent and display message accordingly.
Thanks & Regards,
Sanju.Sounds like this is default behaviour of the metrics for tablespace full?
Here is the basic query for OEM metrics:
select
target_type,
target_name,
metric_column Metric,
decode(warning_threshold,' ',null, decode(warning_operator,'Equal To','=','Not Equal','!=','Greater Than','>','Less Than','<',warning_operator) || ' ' || warning_threshold) Warning,
decode(critical_threshold,' ', null, decode(critical_operator,'Equal To','Not Equal','!=','=','Greater Than','>','Less Than','<',critical_operator) || ' ' || critical_threshold) Critical
from mgmt$metric_collection
--where target_type = 'oracle_emd'
--and metric_column = 'HostInfovszGrowth'
--and warning_threshold != '20'
--where target_type = 'host'
where-- metric_column like 'tnsPing'
-- (warning_threshold != '80' and critical_threshold != '95')
--and
target_type = 'oracle_database'
--and target_type = 'host'
--and
--target_type = 'oracle_listener'
--target_type = 'oracle_emd'
--and metric_column like 'generic%'
--and warning_threshold like '%ORA%'
and target_name = 'XXXSOMEHOSTNAMExxxx'
and metric_column = 'pctUsed'
order by 1,3,2 -
MMS is not sending or receiving on iPhone 5s and gets an alert needs to be activated.
MMS is not sending or receiving on Iphone 5s and gets an alert needs to be activated. Wind Mobile set up the MMS settings the data works the texts work but not MMS.
Cellular data is not used with SMS only. SMS are exchanged over the same network as calls. MMS with the iPhone requires cellular data. If you have MMS Messaging and Cellular Data enabled, the problem lies with your carrier.
-
'High' Priority and 'critical' severity alerts from all MP's in SCOM 2007 R2
Hi All
Can anyone help me with the script to get all alert details from monitors and rules which are set to "high" priority and "critical" severity in SCOM 2007.
Regards
MadhaviYou can below script to show all agent which isn't health
$ReportOutput += "<h2>Agents where Health State is not Green</h2>"
$ReportOutput += Get-Agent |
where {$_.HealthState -ne "Success"} |
select Name,HealthState | ConvertTo-HTML
-fragment$ReportOutput += "<h2>Agents where the Monitoring Class is not available</h2>"
$AgentMonitoringClass = get-monitoringclass
-name "Microsoft.SystemCenter.Agent"
$ReportOutput+= Get-MonitoringObject-monitoringclass:$AgentMonitoringClass|
where{$_.IsAvailable -eq$false} |
selectDisplayName | ConvertTo-HTML-fragment
Also you can refer below links
http://www.definit.co.uk/2012/01/scom-2007-r2-daily-health-check-script/
http://www.blackops.ca/cms/blog/?p=155
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical -
LMS 4.2 - Two notifications for one alarm.
Currently when a device, say a router goes offline we receive two Active 'Unresponsive' alarms for the router and then when it comes back online we receive two Cleared 'Unresponsive' alarms. All have their own unique Event ID. (shown below)
I was wondering if anyone could help me to config LMS to send only one Active 'Unresponsive' notification when a device is offline and then one Cleared 'Unresponsive' when the device is back online.
Here's an example of the Active 'Unresponsive' alarms I receive when I power the router off:
Notification 1
EVENT ID = 0002BI5
TIME = Thu 29-Nov-2012 15:26:32 EST
STATUS = Active
SEVERITY = Critical
MANAGED OBJECT = router.domain
MANAGED OBJECT TYPE = Routers
EVENT DESCRIPTION = Unresponsive::Component=172.16.1.254 [router.domain];ComponentClass=IP;ComponentEventCode=1098;InterfaceType=ETHERNETCSMACD;InterfaceMode=NORMAL;InterfaceAdminStatus=UP;Address=172.16.1.254;IPStatus=TIMEDOUT;InterfaceOperStatus=UP;Ne
CUSTOMER IDENTIFICATION = COMMS TEAM
CUSTOMER REVISION = 1
NOTIFICATION ORIGINATOR = Fault Management Module
Notification 2
EVENT ID = 0002BI6
TIME = Thu 29-Nov-2012 15:26:57 EST
STATUS = Active
SEVERITY = Critical
MANAGED OBJECT = router.domain
MANAGED OBJECT TYPE = Routers
EVENT DESCRIPTION = Unresponsive::Component=router.domain;ComponentClass=Router;ComponentEventCode=1101;SystemObjectID=.1.3.6.1.4.1.9.1.569;Description=Cisco IOS Software, C870 Software (C870-ADVIPSERVICESK9-M), Version 12.4(15)T13, RELEASE SOFTWARE (
CUSTOMER IDENTIFICATION = COMMS TEAM
CUSTOMER REVISION = 1
NOTIFICATION ORIGINATOR = Fault Management Module
Any suggestions?Am I alone with this issue of receiving two notifications for one Unreachable event?
-
Acquired DVR, STB. and Router from Apartment cleanout; Return?
I am trying to do the right thing but poor customer service is not allowing me. I do IT work and received a DVR, STB, and Router from an apartment cleanout from a property owner. I am uncertain if the boxes are paid off or what, but rather than accept stolen property or flip them, I want to contact Verizon and have a return put out on the equipment. Hey maybe I'll get a credit or a few months of movies or something. But I certainly am not spending another minute sitting on hold to do this. I could not get through over 45 minutes yesterday. If I call and specify that I want to buy new service though, I get right through- only to be redirected anyways. Funny how it works. I love my FIOS service, always have, but to call them for anything requires taking a half day off of work. So, with that said- does anyone have contact info for equipment returns? Pittsburgh/Monroeville PA area. Again, if it's going to cost me anything, screw them. I will throw the stuff away as it should have been in the first place. If the equipment was paid for, it would be nice to have it activated to my account and no longer pay rental fees for my STB and DVR.
Message Edited by betteroff on 08-14-2009 06:47 AMDon't know who to contact, but the video equipment is never considered paid off and remains forever Verizon property (that's how they make money on them). After a year I belive Verizon doesn't require the return of the router. They will not activate any STB without it being in their inventory and charging you a monthly fee.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem. -
I have two accounts (A and B) from the same provider on my pc, B is also on another pc and used by someone other than me. Thus, B on my pc is a duplicate and I do not want it displayed on my pc. How do I get it off?
What's wrong with deleting B?
-
Can a disk utilization be more than 100% as shown from alert notification?
Hello,
I received an alert notification from the GRID. The percentage is 670.94%? What does this mean? Is it possible to go over 100%?
Thank you.
Severity=Critical
Message=Disk Utilization for 10 is 670.94%, crossed warning (80) or critical (95) threshold.
Notification Rule Name=Host Availability and Critical States
Notification Rule Owner=SYSMAN
Notification Count=1Known Issue:
Disk Utilization/Disk Device Busy Metrics Displaying Values Above 100% on Windows, Generating Critical Alerts
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=303788.1
DISK UTILIZATION METRIC FALSELY TRIGGERS ON WINDOWS
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=382802.1 -
International Data Pack - Notifications Warnings and Alerts
I recently added an $85/300Mb International Data Pack to my iPad. I received no Activation Confirmation, no data usage notificationa at 50%, 85% etc, and no warnings on activation in a new country. I lie awake at night and ponder these things, and the answer is quite simple: If you apply for an International Data Pack to be applied to an iPad (and most likely any Mobile Broadband device) the Pack will be applied OK, and it will work OK, but you will never get any SMS notifications, usage warnings or new country cost alerts!!An iPad SIM is only a 3G device (or 4G on later models) Telstra SMS notifications are in the 2G band, actually not even 2 G, they are sent in the signalling channels associated with voice calls, so SMSs can not technically be received on a 3G/4G Only device such as an iPad!You can try it yourself, turn off any web based messaging such as “iMessage” and send an old fashioned SMS TXT from your phone to your iPad number - your iPhone will not mark it as “Not delivered” but your iPad will never receive it.ps - you dont actually need to turn off iMessage, you can not send an iMessage to your iPad number either!You will see some messages on your iPad, (including SMS messages) but these are messages to your iPhone and only where/when you have your iPad and iPhone messages synced.You will also note that if you turn off iMessage in you iPad settings, you have no options to send an old-fashioned SMS (Thats because it is not technically possible to send (or receive) an SMS from a 3G device!)Others may disagree, so I welcome any debate or alternate opinion
Help - I give up! The website on International Roaming with a pre-paid says: "Usage alertsWe’ll send SMS alerts to keep you up-to-date with your usage. Depending on your Pre-Paid set up you might receive multiple usage and pricing SMS alerts. There is no charge for receiving these SMS alerts.The alerts we’ll send:If you have an International Roaming data pack, we’ll send you an SMS when you’ve have used 50%, 85% and 100% of your data allowance.If you use 100% of your data allowance we’ll send you an SMS reminding you of the cost to use data while overseas.If you’ve set up a Balance Based Automatic Recharge we’ll send you an SMS for every $100 of International Roaming pay-as-you-go (PAYG) data you use.Please note: You can’t opt out of these SMS alerts." Ms_Megahurtz (below) advises me: "....This is why from MyAccount I went into the alerts and enabled email alerts for my iPad so I get those alerts relevant to my iPad Mini 3...." I have been into MyAccount a dozen times, but I can find no path to change any Telstra SMS Alerts (which you can not get on an iPad) to an email alert? I'm a simple emperor of the dark side and the forces of good seem to be prevailing against me, so can anyone help me with keystroke-by-keystroke instructions?
-
Issue in downloading HP Critical Drivers Alert from Email
Hello Everyone, when I receive email on critical drivers alert, after clicking on the link within email HP redirects me to blank page where there are no drivers.how to download those drivers listed in email containing drivers?
Hi:
HP is aware of the drivers missing from the support pages issue and is working on resolving it.
It is affecting hundreds of notebook models.
Since I don't work for HP, I do not know when the sites will be operational again.
This has happened once before, so hopefully they learned from past experience how to troubleshoot the problem.
With the Thanksgiving holiday in the United States, that has delayed things, I'm sure.
We are on the fifth day of this problem. -
Apple Support Communities
HI
I am receiving THOUSANDS, YES THOUSANDS of eMails from ALL Apple Support Communities.I deleted some one thousand but still more than Normal.
Please i need your Help.This is Enormous!!! I've never seen this happening! It should be a huge mistake that everybody from All Apple Support Communities
sending me their complains? I think it is a big Mistake, or Something bigger, i don't Know! I just need Help in this moment. it's been more than three or four days
i saw a number of eMails from Apple Support communities landing in my eMail address, should this be normal? I don't think so.
I appreciate any Help
Kind Regards
& a Happy New YearClick Your Stuff in the upper right and select Profile. In your profile there is a link to the right to manage email notifications.
-
Help needed in receiving two consecutive msges from SIP Ser in UDP server!
Hi everyone,
I am Mitul Gogoi,from Assam,North-east part of India.
I am writing a SIP proxy server,which is simly a UDP server and which will sit between the Client(X-Lite softphone) and Brekeke SIP Server and just receive and send messages.
Client---------------->My UDP Server-------------------------->SIP Server (This is for requests)
again,
SIP Server---------->My UDP Server-------------------------->Client (This is for responses)
(couldnot draw the arrows together)
My server will receive any msg coming from Client in port 7000 from Client and My server will send the msg to SIP Server to its IP address and port 5060.So, I just wanted to change the port number to which Client will send msges;i.e. instead of earlier port 5060,it will now send to port 7000.
The msg sending and receiving scenerio:
1.The first msg from Client is received by My Server.
2.My server sends the msg to SIP Server.
3.My server then waits for response from SIP server.
4.One msg comes to My server and received successfully. and it closes the socket.
5.This msg is sent to Client.
6.Second msg comes from SIP server to My server.But My server is unable to receive this second msg.maybe because My server closes the socket to receive the next msg.
I am using ResponseHandler Thread in main which will listen to any msges that may come from SIP server to My server.
My question is :
Is it not possible to receive two consecutive msg from SIP server ?
If one msg comes,it then closes the socket.
My code for sending and receiving :
udpClSocket = new DatagramSocket();
packet = new DatagramPacket(buf, buf.length,InetAddress.getByName(server), port);
udpClSocket.send(packet);//it will send to SIP Server as well as Client,by changing the server and port
byte resbuf[] = new byte[msgSize];
packet = new DatagramPacket(resbuf, resbuf.length);
udpClSocket.receive(packet);//it will receive msg from SIP server only
packet = null;
udpClSocket.close();
The first msg comes to My server successfully,but the second msg is not being received.
I have tried in so many ways,such as taking two different ports :one for receiving for Client and My server ,and another port for My server and SIP server.
If anyone can help me in this ,then I will be highly grateful.
regards,
MitulWhy? Throw all this code away, and use the NIST reference implementation of JAIN-SIP. They've done all the hard work for you. All you have to do to write a stateless proxy is a little mild header processing.
Thank you ejp for your reply.Mine is a Outbound SIP proxy server,which uses a port other than default 5060 SIP server port.The client will REGISTER SIP server via my server.and moreover,I want to build my own server at least once for learning purpose.
maybe because My server closes the socket to receive the next msg.
Why?
I donot know why.may be I am very new to network programming or did not do much research in networking.But,my code should work;couldn't find out any fault.
Here is my code:
package com.ef;
import java.net.DatagramPacket;
import java.net.DatagramSocket;
import java.net.InetAddress;
import java.util.Date;
* It sends UDP packets to following destinations-
* 1. SIP Server
* 2. SIP UACs
public class OBUDPClient extends Thread {
private DatagramSocket udpClSocket;
private DatagramPacket packet;
private String server = "192.168.1.2";//IP of Brekeke SIP server
private int port = 5060;
//SIP Message Size
private int msgSize = 2048;
private byte buf[];
private boolean serFlag = true;
private OBMessage m;
* Send Request to SIP Server
* @param in_packet
* @throws Exception
public OBUDPClient(DatagramPacket in_packet) throws Exception{
super("Client-"+String.valueOf((new Date()).getTime()));
this.buf = in_packet.getData();
m = new OBMessage();
* Keep track of IP and Port of the source of this packet. Response
* from SIP Server will be redirected to this IP and Port
m.setTargetIP(in_packet.getAddress().getHostAddress());
m.setTargetPort(in_packet.getPort());
start();
* Send Request to SIP UAC (). This constructor gets call from OBResponseHandler.java
* @param server
* @param port
* @param buf
* @throws Exception
public OBUDPClient(String server, int port, byte buf[]) throws Exception{
super(String.valueOf((new Date()).getTime()));
this.server = server;
this.port = port;
this.buf = buf;
serFlag = false;
start();
public void run(){
try{
System.out.println("OBUDPClient Redirecting packet");
udpClSocket = new DatagramSocket();
//Send Request
packet = new DatagramPacket(buf, buf.length,InetAddress.getByName(server), port);
udpClSocket.send(packet);
//Receive Response
byte resbuf[] = new byte[msgSize];
packet = new DatagramPacket(resbuf, resbuf.length);
udpClSocket.receive(packet); //could not receive two consecutive msg from SIP server
if(serFlag){
* If request is sent to SIP Server we are interested for the
* response otherwise not
System.out.println("<----------------Handle Response----------------->");
System.out.println("++++++++++++++++++++++++++++++++++++++++++++++++++");
System.out.println("Response from SIP Server: "+new String(packet.getData()).trim());
System.out.println("++++++++++++++++++++++++++++++++++++++++++++++++++");
//Read SIP reseponse sent by SIP Server
m.setMessage(new String(packet.getData()).trim());
//Store the Response message in Queue
OBMain.q.push(m);
}catch(Exception ex){
ex.printStackTrace();
packet = null;
udpClSocket.close();
Note:Everything starts from the Client.First,Client makes a REGISTER request;it is passed through Outbound server to SIP server.Then,SIP server responds with 100 Trying;this is received successfully by my outbound server and sent to Client.Then,again,SIP server responds with 200 OK;this is not received by my outbound server;hence cannot reach Client,as a result of which Registration fails.
regards,
mitul -
I received a notification on my Iphone recently that "Leroys Ipad" is now using my phone number for Imessage. The problem is that i no longer have that Ipad but my ex girlfriend does and we no longer communicate. How do i receive Imessage on MY PHONE ONLY or delete other devices not in my possession from my messages?
You need to change your Apple ID password. You could login to Find My iPhone and wipe that iPad if you felt the need to do so.
-
I have just received two white I Phones 4 Model MC611LL and they have the Face Time Feature included. I own an older version of I Phone 4 Model MC610LL and it doesn´t have the Face Time feature included. How can I get it?.
Where did you get the old one? If it came from the Middle East, FaceTime was removed from those due to government regulations. It can NOT be added back to them.
-
I received update notification and started to download it on my iphone 5 but it says it takes 3 hours
Well, right now, Apple is getting loads of people who are trying to download the new update. My iPod is doing the same thing, so, just wait an hour or two and then try again. It may take a while to veryify the update, and even longer to actually download it. Some people at my school updated their OS in study hall, while others were having the same problem you were. It should be fixed soon, just relax...
Maybe you are looking for
-
AirPrint and the D-Link DIR-655 solution
After much messing around I have finally achieved the ability to airprint using a DLink DIR-655 router. In my own search for a solution it became apparent this is bothering a lot of you. So here is my solution. Basic equipment we were using: iPhone 4
-
I have never dropped my iPhone before and when I take a video and or send it to a friend they can't hear it and either can I. I was wondering if apple would replace it by sending me a new iPhone or if it would cost money to fix?
-
How do I sync ipad with Apple TV since updating software
I have finally updated the ipad software and now it won't sync up with the Apple TV... Help.
-
How do I include Time Capsule with my new AT&T U-verse network?
AT&T U-verse network (3 HD TVs, telephone & 18 Mbps Internet) was installed last week and is running great. It has one AT&T WAP attached to the latest AT&T Motorola NVG510 router about a foot away. First I want to incorporate a 2007 vintage 2TB TC
-
Apple 16" Color Display with 15" Aluminium Powerbook?
I have pulled my old Mac 16" Color Display out of the shed, only to discover that my 15" powerbook Al running 10.4.6, once connected via DVI-VGA and VGA-Apple VGA, won't show the necessary 832 x 624 resolution option, so I can't use it. When I connec